PRIMERGY BladeFrame
System configurator and order-information guide
December 2011
Contents
Instructions
Configuration diagram
Configurator
0
I
II
III
IV
V
VI
VII
VIII
System software
System Unit BF200
System unit BF400 S2
Upgrade System Unit BF400
Dual (Intel) Processing Blades (BFi20)
Dual (AMD) Processor Blades (BFa20)
Quad (Intel) Processind Blades (BFi40))
Quad (AMD) Processing Blades (BFa40)
Dummy Processing Blade
Change report
PRIMERGY Server
System configurator and order-information guide
PRIMERGY BladeFrame
Status: 2011-11-30
Instructions
This document contains basic product and configuration information that will enable you to configure your system via
System-Architect.
Only the tool "System-Arcitect" will ensure a fast and proper configuration of your PRIMERGY server or your complete
PRIMERGY Rack system.
Please pay attention to the naming conventions:
BF400 S2
BF200
BFi20
BFi20S5/6
BFa20
BFa20S2
BFi40
BFi40S2
BFa40
BFa40S2
System unit with up to 24 Processing Blades,
improved performance, power options and housing
System unit with up to 6 Processing Blades
2-way Processing Blade, (Intel)
2-way Processing Blade, Quad Core CPUs (Intel)
2-way Processing Blade, (AMD)
2-way Processing Blade, Dual Core CPUs (AMD)
4-way Processing Blade, (Intel)
4-way Processing Blade, Dual Core CPUs (Intel)
4-way Processing Blade, (AMD)
4-way Processing Blade, Dual Core CPUs (AMD)
You can configure your individual PRIMERGY BladeFrame system in order to adjust your specific requirements.
The System configurator is divided into several chapters that are identical to the current price list and PC-/ System-Architect.
Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through
the configurator by following the lines from the top to the bottom.
Section
III
Processing Blades BFi20
Processing Blades with:
- Dual Xeon Processor Support with EM64T
- Different memory configurations with DDR2 DIMM modules
- No internal hard disks
- Different number of processing blades can be installed in
System Unit BF200 (max. 6) and System Unit BF400 (max. 24). Remaining slots has to be populated with
Dummy Processing Blades.
6x or 24x
Processing Blade with
Processing Blade with
Processing Blade with
Intel Xeon 3.2 GHz (EM64T)
Intel Xeon 3.2 GHz (EM64T)
Intel Xeon 3.6 GHz (EM64T)
includes 2x CPU, 1 MByte SLC
includes 2x CPU, 1 MByte SLC
includes 2x CPU, 1 MByte SLC
and 2 GByte memory
and 6 GByte memory
and 8 GByte memory
occupies one slot
occupies one slot
occupies one slot
S26361-K1061-V201
S26361-K1061-V202
S26361-K1061-V203
PB200507
max. 6x per System Unit BF200
PB200508
max. 6x per System Unit BF200
PB200504
max. 6x per System Unit BF200
max. 24x per System Unit BF400
max. 24x per System Unit BF400
max. 24x per System Unit BF400
In one chapter you can only select as many components (here 3x) as the arrow indicates.
3x
Please note that there are information symbols which indicate necessary information.
For further information see:
http://ts.fujitsu.com/products/standard_servers/index.html
(internet)
https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx
(extranet)
Prices and availability see price list and PC-/ System-Architect
Subject to change and errors excepted
Fujitsu Technology Solutions x86 PRIMERGY Server
2 of 20
Bright color: included
Slot C2: Control Blade with switch
Slot 6: Processing Blade (or Dummy Processing Blade)
Slot 5: Processing Blade (or Dummy Processing Blade)
Slot 4: Processing Blade (or Dummy Processing Blade)
Slot 3: Processing Blade (or Dummy Processing Blade)
Slot 2: Processing Blade (or Dummy Processing Blade)
Slot 1: Processing Blade (or Dummy Processing Blade)
Slot C1: Control Blade with switch
System configurator and order-information guide
PRIMERGY BladeFrame
Status: 2011-11-30
Configuration diagram BF200 BladeFrame chassis incl. Control Blades
System Unit BF200 ( I )
Extension slots front side
Blade plane with connectors at the rear side
dark color: configurable
Fujitsu Technology Solutions x86 PRIMERGY Server
3 of 20
System configurator and order-information guide
PRIMERGY BladeFrame
Status: 2011-11-30
Configuration diagram BF400 S2 BladeFrame chassis incl. Control Blades
System Unit BF400 S2 ( II )
Extension slots front side
Slot 24: Processing Blade (or Dummy Processing Blade)
Slot 23: Processing Blade (or Dummy Processing Blade)
Slot 22: Processing Blade (or Dummy Processing Blade)
Slot 21: Processing Blade (or Dummy Processing Blade)
Slot 20: Processing Blade (or Dummy Processing Blade)
Slot 19: Processing Blade (or Dummy Processing Blade)
Slot 18: Processing Blade (or Dummy Processing Blade)
Slot 17: Processing Blade (or Dummy Processing Blade)
Slot 16: Processing Blade (or Dummy Processing Blade)
Slot 15: Processing Blade (or Dummy Processing Blade)
Front
Slot C2: Control Blade
Slot S2: Switch Blade
Slot S1: Switch Blade
Slot C1: Control Blade
Slot 12: Processing Blade (or Dummy Processing Blade)
Rear
Slot 13: Processing Blade (or Dummy Processing Blade)
Mid plane with connectors
Slot 14: Processing Blade (or Dummy Processing Blade)
Slot 11: Processing Blade (or Dummy Processing Blade)
Slot 10: Processing Blade (or Dummy Processing Blade)
Slot 9: Processing Blade (or Dummy Processing Blade)
Slot 8: Processing Blade (or Dummy Processing Blade)
Slot 7: Processing Blade (or Dummy Processing Blade)
Slot 6: Processing Blade (or Dummy Processing Blade)
Slot 5: Processing Blade (or Dummy Processing Blade)
Slot 4: Processing Blade (or Dummy Processing Blade)
Slot 3: Processing Blade (or Dummy Processing Blade)
Slot 2: Processing Blade (or Dummy Processing Blade)
Slot 1: Processing Blade (or Dummy Processing Blade)
Bright color: included
dark color: configurable
Fujitsu Technology Solutions x86 PRIMERGY Server
4 of 20
System configurator and order-information guide
PRIMERGY BladeFrame
Status: 2011-11-30
Start PRIMERGY BladeFrame System Software
Software Configurator
There are two licensing and related pricing models for the system software available:
- modular (since pricelist 4/2007): base license per frame plus enhanced licenses per pBlade type
- standard full function: license for max number and each type of pBlades without functional
limitation (in addition special offering: "pay as you grow" for BF400 S2)
Note: in longer term the standard licensing will be phased out
Modular Licensing for System Software
Standard Full Function Licensing for System Software
Alternative A
Alternative B (for Production System)
Alternative C (for Demo System)
Alternative D (for Evaluation System)
Alternative A
Modular Licensing for System Software
for 2-socket pBlade
max.6x or 24x
for 4-socket pBlade
PAN Portability and DR License
PAN Portability and DR License
limited to one 2-socket pBlade
limited to one 4-socket pBlade
for BF200 or BF400 S2
for BF200 or BF400 S2
S26361-F3226-E375
S26361-F3226-E376
Can be
- includes PAN portability and DR
- includes PAN portability and DR
ordered
license for one 2-socket pBlade
license for one 4-socket pBlade
once per
- requires SW base license (-E370 or -E379)
- requires SW base license (-E370 or -E379)
- and for Failover functionality order
- and for Failover functionality order
optional Server Portability lic. (-E373 or -E374)
optional Server Portability lic. (-E373 or -E374)
To be ordered per 2-Socket pBlade if needed
To be ordered per 4-Socket pBlade if needed
SW100605FS
pBlade
SW100606FS
Server Portability and Failover License
Server Portability and Failover License
limited to one 2-socket pBlade
limited to one 4-socket pBlade
for BF200 or BF400 S2
for BF200 or BF400 S2
S26361-F3226-E373
S26361-F3226-E374
Can be
- includes server portability and failover
- includes server portability and failover
ordered
license for one 2-socket pBlade
license for one 4-socket pBlade
- requires SW base license (-E370 or -E379)
- requires SW base license (-E370 or -E379)
To be ordered per 2-Socket pBlade if needed
To be ordered per 4-Socket pBlade if needed
SW100603FS
once per
pBlade
SW100604FS
BladeFrame Software Base License
BladeFrame Software Base License
for Frame and 24 pBlades
for Frame and 6 pBlades
per System Unit BF400 S2
per System Unit BF200
S26361-F3226-E370
S26361-F3226-E379
Must be
includes
includes
ordered
- base license (PAN Virtualization & Mgmt;
- base license (PAN Virtualization & Mgmt;
once per
and vBlades)
and vBlades)
System
for BF400S2 frame and up to 24 pBlades
for BF200 frame and up to 6 pBlades
Unit!
- software and documentation
- software and documentation
- OS extensions for
- OS extensions for
RedHat RHEL4 and 5, SuSE Linux ES 9
and ES 10 (support of 32-bit and 64-bit)
Must be ordered per System Unit BF400 S2
SW100600FS
RedHat RHEL4 and 5, SuSE Linux ES 9
and ES 10 (support of 32-bit and 64-bit)
Must be ordered per System Unit BF200
SW100300FS
End of Alternative A
Fujitsu Technology Solutions x86 PRIMERGY Server
5 of 20
System configurator and order-information guide
PRIMERGY BladeFrame
Status: 2011-11-30
Alternative B
Standard Full Function Licensing for System Software
BladeFrame Software Basis Set
for customers only which before had
BladeFrame Software Basis Set
per System Unit BF400 S2
ordered S26361-F3226-E319
per System Unit BF200
(Software Basis Set per System Unit
S26361-F3226-E310
BF400 S2 with 8 pBlades) and
S26361-F3226-E311
Must be
Includes software and documentation
S26361-F3226-E317 ( SW License limited
Includes software and documentation
ordered
for BF400 S2 system software
to 8 pBlades)
for BF200 system software
once per
(PAN Manager incl. vBlades)
System
Unit!
(PAN Manager incl. vBlades)
and OS extensions for
Use "Modular Pricing" alternative for
and OS extensions for
RedHat Linux RHEL4 and 5, SuSE Linux ES 9
new BF400S2 projects
RedHat Linux RHEL4 and 5, SuSE Linux ES 9
and ES 10 (support of 32-bit and 64-bit)
and ES 10 (support of 32-bit and 64-bit)
Must be ordered per System Unit BF400/BF400 S2
Must be ordered per System Unit BF200
SW100210FS
SW100301FS
BladeFrame SW License (up to
BladeFrame SW License (up to
24 pBlades) per System Unit BF400 S2
6 pBlades) per System Unit BF200
S26361-F3226-E315
S26361-F3226-E316
Must be
Includes license for up to 24 pBlades
Includes license for up to 6 pBlades
ordered
for BF400 S2 system software
for BF200 system software
once per
(PAN Manager incl. vBlades)
(PAN Manager incl. vBlades)
System
and OS extensions for
and OS extensions for
Unit!
RedHat Linux RHEL4 and 5, SuSE Linux ES 9
RedHat Linux RHEL4 and 5, SuSE Linux ES 9
and ES 10 (support of 32-bit and 64-bit)
and ES 10 (support of 32-bit and 64-bit)
Must be ordered per System Unit BF400/BF400 S2
Must be ordered per System Unit BF200
BladeFrame SW License (limited
to 1 add. pBlade) per
System Unit BF400 S2
To be ordered
S26361-F3226-E318
for each additional
Processing Blade (pBlade),
Includes license, limited to 1 additional pBlade,
up to 16x
for BF400 S2 system software
see sections III to VI,
and OS extensions for
which will be used with
RedHat RHEL 4 and 5, SuSE Linux ES 9
this special BF400 S2 offering
with 8 pBlades
and ES 10 (support of 32-bit and 64-bit)
Must be ordered for each additional pBlade
End of Alternative B
Fujitsu Technology Solutions x86 PRIMERGY Server
6 of 20
System configurator and order-information guide
PRIMERGY BladeFrame
Status: 2011-11-30
Alternative C
Standard Full Function Licensing for Demo System Software
BladeFrame Software Demo Basis Set
BladeFrame Software Demo Basis Set
per System Unit BF400 S2
per System Unit BF200
for Demo System, non-production usage
for Demo System, non-production usage
S26361-F3226-E321
S26361-F3226-E322
Must be
Includes software and documentation
Includes software and documentation
ordered
for BF400 S2 system software
for BF200 system software
once per
(PAN Manager incl. vBlades)
(PAN Manager incl. vBlades)
System
and OS extensions for
and OS extensions for
Unit!
RedHat RHEL4 and 5, SuSE Linux ES 9
RedHat RHEL4 and 5, SuSE Linux ES 9
and ES 10 (support of 32-bit and 64-bit)
Must be ordered per System Unit BF400 S2
SW100609FS
and ES 10 (support of 32-bit and 64-bit)
Must be ordered per System Unit BF200
SW100304FS
End of Alternative C
Alternative D
Standard Full Function Licensing for Evaluation System Software
BladeFrame Software Eval Basis Set
BladeFrame Software Eval Basis Set
per System Unit BF400 S2
per System Unit BF200
for Eval System, non-production usage,
for Eval System, non-production usage,
max 6 months, non-transferable
max 6 months, non-transferable
S26361-F3226-E323
S26361-F3226-E324
Must be
Includes software and documentation
Includes software and documentation
ordered
for BF400 S2 system software
for BF200 system software
once per
(PAN Manager incl. vBlades)
(PAN Manager incl. vBlades)
System
and OS extensions for
and OS extensions for
Unit!
RedHat RHEL 4 and 5, SuSE Linux ES 9
RedHat RHEL 4 and 5, SuSE Linux ES 9
and ES 10 (support of 32-bit and 64-bit)
Must be ordered per System Unit BF400 S2
SW100608FS
and ES 10 (support of 32-bit and 64-bit)
Must be ordered per System Unit BF200
SW100303FS
BladeFrame SW Eval License (up to
BladeFrame SW Eval License (up to
24 pBlades) per System Unit BF400 S2
6 pBlades) per System Unit BF200
for Eval System, non-production usage,
for Eval System, non-production usage,
max 6 months, non-transferable
max 6 months, non-transferable
S26361-F3226-E325
S26361-F3226-E326
Must be
Includes evaluation license for up to 24 pBlades
Includes evaluation license for up to 6 pBlades
ordered
for BF400 S2 system software
for BF200 system software
once per
(PAN Manager incl. vBlades)
(PAN Manager incl. vBlades)
System
and OS extensions for
and OS extensions for
Unit!
RedHat RHEL 4 and 5, SuSE Linux ES 9
RedHat RHEL 4 and 5, SuSE Linux ES 9
and ES 10 (support of 32-bit and 64-bit)
Must be ordered per System Unit BF400 S2
and ES 10 (support of 32-bit and 64-bit)
Must be ordered per System Unit BF200
End of Alternative D
Fujitsu Technology Solutions x86 PRIMERGY Server
7 of 20
System configurator and order-information guide
PRIMERGY BladeFrame
Status: 2011-11-30
Continue with SW A
Virtualization Extension for
Virtualization Extension for
To be ordered
Windows 2003
Windows 2008
for each configured
S26361-F3226-E312
S26361-F3226-E327
see sections III to VI,
Includes CD and license
Includes CD and license
which will be used with
for one Processing Blade.
for one Processing Blade.
Windows 2003/2008 native.
Must be ordered for each
Must be ordered for each
Not needed for Windows
pBlade, which natively runs
pBlade, which natively runs
running as guest-OS
Windows 2003 (32-bit or 64-bit).
Windows 2008 (32-bit or 64-bit).
on vBlades
(not for guest-OS on vBlades)
(not for guest-OS on vBlades)
(see sections III - VI)
(see sections III - VI)
Processing Blade (pBlade),
max 6x or 24x
SW900310FS
SW900320FS
Operating Systems for the Processing Blades (pBlades)
The corresponding System Builder Windows 2003
can be ordered from the Software Center of Fujitsu Siemens Computers.
For more and detailed information contact:
Dominikus.Besserer@fujitsu-siemens.com
SW B
Fujitsu Technology Solutions x86 PRIMERGY Server
8 of 20
System configurator and order-information guide
PRIMERGY BladeFrame
Status: 2011-11-30
SW B
Linux OEM Software
SUSE Linux Enterprise Server (OEM)
Apply to all listed SUSE Linux OEM products:
These software may only be ordered and used with Fujitsu Siemens Computers hardware.
All initial Upgrade Protections (E order code) may only be purchased bundled with the
corresponding server.
After the expiration of an initial Upgrade Protection (E order code) it may be renewed
for additional 1, 3 or 5 years by anyone of the same products with a corresponding L order number.
All media kits may only be used with a valid Upgrade Protection.
Pay attention to release and order information in PRINCE -> Operating System -> Linux
SUSE Linux ES 10 kit (CD+man)
SUSE Linux Enterprise Server 10 for X86 and for AMD64 & Intel
EM64T media kit (Media and manual)
U15045-C192-B
SUSE Linux ES 9 kit (CD+man)
SUSE Linux Enterprise Server 9 for X86 and for AMD64 & Intel
EM64T media kit (Media and manual)
U15045-C109-B
to be ordered for
each respective blade
SUSE Linux ES <=32CPU 1Y
SUSE Linux Enterprise Server for all platforms
1-Server up to 32-CPU sockets 1-Year Subscription
U15045-C112-B
to be ordered
for BF200
SUSE Linux ES x86 & EM64T BF200 3Y
SUSE Linux Enterprise Server for x86 and AMD64 & EM64T
BF200 System Unit 3-Years Upgrade Protection.
U15045-C162-B
to be ordered
for BF400
SUSE Linux ES x86 & EM64T BF400 3Y
SUSE Linux Enterprise Server for x86 and AMD64 & EM64T
BF400 System Unit 3-Years Upgrade Protection.
U15045-C172-B
Continue with
PRIMERGY BladeFrame
hardware configurator
SW C
Fujitsu Technology Solutions x86 PRIMERGY Server
9 of 20
PRIMERGY-Software Configurators and Release Lists
SW C
Red Hat Enterprise Linux - L3 Support (OEM)
Apply to all listed Red Hat Linux OEM products:
These software may only be ordered and used with Fujitsu Siemens Computers hardware.
All initial Subscriptions may only be purchased bundled with the corresponding server.
After the expiration of an initial Subscription it may be renewed by on of the same products.
Important notice:
Since the Red Hat Enterprise Linux Suscriptions only comprises Red Hat level3 Support
the corresponding Service Packs or appropriate Linux Contracts must mandatorily be
purchased and used beside Subscriptions.
Pay attention to release and order information in PRINCE -> Operating Systems - Linux
Red Hat EL <=2CPU 5x9 1Y
Red Hat Enterprise Linux up to 2-CPU sockets
5x9 l3 support for x86, x86_64 1-Server 1-Year
S26361-F2346-E701
Red Hat EL <=2CPU 5x9 3Y
Red Hat Enterprise Linux up to 2-CPU sockets
5x9 l3 support for x86, x86_64 1-Server 3-Years
S26361-F2346-E702
Red Hat EL AP 5x9 1Y
Red Hat Enterprise Linux AP for x86, x86_64
5x9 l3 support 1-Server 1-Year
S26361-F2346-E711
Red Hat EL AP 5x9 3Y
Red Hat Enterprise Linux AP for x86, x86_64
5x9 l3 support 1-Server 3-Years
S26361-F2346-E712
Red Hat EL <=2CPU 7x24 1Y
Red Hat Enterprise Linux up to 2-CPU sockets
7x24 l3 support for x86, x86_64 1-Server 1-Year
S26361-F2346-E706
Red Hat EL <=2CPU 7x24 3Y
Red Hat Enterprise Linux up to 2-CPU sockets
7x24 l3 support for x86, x86_64 1-Server 3-Years
S26361-F2346-E707
Red Hat EL AP 7x24 1Y
Red Hat Enterprise Linux AP for x86, x86_64
7x24 l3 support 1-Server 1-Year
S26361-F2346-E716
Red Hat EL AP 7x24 3Y
Red Hat Enterprise Linux AP for x86, x86_64
7x24 l3 support 1-Server 3-Years
S26361-F2346-E717
Continue with
PRIMERGY BladeFrame
hardware configurator
SW D
Fujitsu Technology Solutions x86 PRIMERGY Server
10 of 20
System configurator and order-information guide
PRIMERGY BladeFrame
Status: 2011-11-30
SW D
Solaris Operating System
Solaris 10 Operating system
Apply to all listed Solaris software
This software may only be ordered and used with Fujitsu Siemens Computers hardware.
At least one Solaris Media Kit has to be ordered together with each system.
Order required number of 3rd level support contracts together in one order per each system separately.
3rd level support MUST be sold together with a 1st+2nd level support contract from FSC ITPS.
Pay attention to release and order information in PRINCE -> Operating System -> Solaris
Solaris 10 license, 2-Socket Server
to be ordered for
each respective blade
License only, MUST be ordered with 3rd Level Support
S26361-F3226-E341
S10 3rd Level Support, 3 year, 2 sock. 5x9
includes 3rd Level Support and SunSolve access for patches
Additional 1st+2nd Level support with FSC ITPS is mandatory.
S26361-F3226-E337
Solaris 10 license, 4-Socket Server
License only, MUST be ordered with 3rd Level Support
to be ordered for
each respective blade
S26361-F3226-E338
S10 3rd Level Support, 3 year, 4 sock. 5x9
includes 3rd Level Support and SunSolve access for patches
Additional 1st+2nd Level support with FSC ITPS is mandatory.
S26361-F3226-E340
Solaris 10 Media kit
incl. extensions for BladeFrame
to be ordered at least once per system
S26361-F3226-E330
Solaris 10 Demo Media kit
for BF200 or BF400 S2
for Demo System, non-production usage
incl. extensions for BladeFrame
to be ordered at least once per system
S26361-F3226-E336
SW900488FS
SW E
Fujitsu Technology Solutions x86 PRIMERGY Server
11 of 20
System configurator and order-information guide
PRIMERGY BladeFrame
Status: 2011-11-30
SW E
VMware ESX3.5 Operating System
Apply to all listed VMware Software products:
The BladeFrame specific "E" order numbers (S26361-F2341-E390 ... E393) for OEM versions are usable, when
ordering together with new pBlades, otherwise please use the corresponding "L" order numbers (L303 ... L306).
Pay attention to release and order information in PRINCE -> Operating System -> VMware
VMware-Software License and SNS
- Virtual Infrastructure 3 Standard and Enterprise
- ESX3.5
The software can be downloaded.
In addition a Media Kit can be ordered
(S26361-F2341-L300)
For this SW product please refer to the corresponding software configurator accessible via the Extranet under
"Configuration & Tools, -All configurations, -Software,
for internal users:
for partners:
Continue with
PRIMERGY BladeFrame
hardware configurator
Fujitsu Technology Solutions x86 PRIMERGY Server
12 of 20
System configurator and order-information guide
PRIMERGY BladeFrame
Status: 2011-11-30
Start PRIMERGY BladeFrame System
Section
I
System Unit BF200
no longer available
The System Unit BF200 is the chassis for rack integration (FSC PrimeCenter) and consists of:
* Chassis (13U); Dimensions (H/W/D): 57.8 / 44.7 / 76 cm; Weight: 127kg (fully configured)
Including:
* all connection infrastructure for Processing Blades
* 19" Rack mounting kit
* 1 Power Input Moduls
* 2 Redundant Control Blades
* 1x power cord 32A CEE (max. 30A system requirement), Universal European (IEC 309), 3.5m
* Bays / slots
- 6 empty slots for up to 6 processing blades, has to be fully populated with
Processing Blades or Dummy Processing Blades
External Interfaces:
- 4x Fibre Channel connections for SAN incl. SFP modules
- 4x Gigabit Ethernet LAN connections, copper RJ45 or fibre SFP included
Software:
- (see section Software Configuration)
Both the Dual and the Quad Processing Blades can be used in mixed configuration within the system unit.
S26361-K1060-V311
S26361-K1060-V312
System Unit BF200, with 2 Control Blades
System Unit BF200, with 2 Control Blades
4x FC ports incl. SFP modules
4x FC ports incl. SFP modules
Additional SFP modules can
4x GbE ports incl. copper SFP modules
4x GbE ports incl. fibre SFP modules
be ordered separately to
ES100103R
ES100104R
Needs 13 height units (U)
Needs 13 height units (U)
change some or all SFPs
from copper to fibre or
vice versa in qty 1.
S26361-F3229-L999
copper: S26361-F3240-E21
Accessory pack for System Unit BF200
fibre:
S26361-F3240-E22
Contains important information and Rack mount accessories.
max. 1x per System Unit BF200
A static transfer switch
for BF200 is offered by
Emerson Network Power.
A FSC white paper describes
the details, see Extranet
A
Fujitsu Technology Solutions x86 PRIMERGY Server
13 of 20
System configurator and order-information guide
PRIMERGY BladeFrame
Status: 2011-11-30
A
Section
II
System Unit BF400 S2
no longer available
The System Unit BF400 S2 is a separate stand alone system and consisting of:
* Stand alone chassis; Dimensions (H/W/D): 210 / 61 / 89 cm; Weight: 454kg (fully configured)
Including:
* all connection infrastructure for Processing Blades
* 4 Power Input Moduls
* 2 Redundant Control Blades
* 2 Redundant internal Switch Blades
* 4x power cords 32A CEE (max. 24A system requirement), Universal European (IEC 309), 3.5m each
* Bays / slots
- 24 empty slots for up to 24 processing blades, has to be fully populated with
Processing Blades or Dummy Processing Blades
* Redundant Power Option for redundant input power from two AC power sources (as an option)
External Interfaces:
The Control Blades provide slots for
- 4x 2Gbit Fibre Channel ports
- 4x Gigabit Ethernet LAN ports
- 4x 10/100/1000 Ethernet LAN ports
Software:
- (see section Software Configuration)
Both the Dual and the Quad Processing Blades can be used in mixed configuration within the system unit.
S26361-K1060-V413
System Unit BF400 S2, with
2x internal Switch Blades
2x Control Blades EX
BC100110R
Stand alone Chassis
S26361-F3229-L998
Accessory pack for System Unit
BF400 S2
Contains important information
max. 1x per System Unit BF400
S26361-F3240-E110
S26361-F3240-E111
S26361-F3240-E102 / -E103
Standard Power Option (PIM-B)
Redundant Power Option (PIM-R)
Standard / Redundant Power Option (PIM-B/-R)
for input power
for redundant input power
for standard / redundant input power
from a single AC power source
connector: international (EMEA)
from two AC power sources
connector: international (EMEA)
from single / two AC power sources
connector: North America
PMS00101R
PMS00111R
PM100202 / PM100222
4x per System Unit BF400 S2
4x per System Unit BF400 S2
S26361-F3240-E13
S26361-F3240-E14
Additinal SFP modules can
Communication Option
Communication Option
be ordered separately to
for the two Control Blades EX
for the two Control Blades EX
change some or all SFPs
4x 2Gbit Fibre Channel ports
4x 2Gbit Fibre Channel ports
from copper to fibre or
4x Gbit Ethernet Fibre ports
4x Gbit Ethernet ports (RJ45)
vice versa in qty 1
4x 10/100/1000 Ethernet (RJ45)
4x 10/100/1000 Ethernet (RJ45)
CB3S0110R
4x per System Unit BF400 S2
CB3S0111R
2x per System Unit BF400 S2
2x per System Unit BF400 S2
copper: S26361-F3240-E21
fibre:
S26361-F3240-E22
Note: The different communication options come with all necessary interface modules.
B
Fujitsu Technology Solutions x86 PRIMERGY Server
14 of 20
System configurator and order-information guide
PRIMERGY BladeFrame
Status: 2011-11-30
B
Section
III
Upgrade Kit BF400 to BF400 S2 (BF400 Chassis reused)
no longer available
The BF400 Upgrade Kit consists of all components to upgrade an existing BF400 to the same
functionality of a BF400 S2:
* All connection infrastructure (BladePlane) for Processing Blades
* 2 Redundant Control Blades
* 2 Redundant internal Switch Blades
* 4x Standard Power Option or
* 4x Redundant Power Option for redundant input power from two AC power sources (as an option)
* 4x (8x for redundancy) power cords 32A CEE (max. 24A system requirement),
Universal European (IEC 309), 3.5m each
External Interfaces:
The Control Blades provide slots for
- 4x 2Gbit Fibre Channel ports
- 4x Gigabit Ethernet LAN ports
- 4x 10/100/1000 Ethernet LAN ports
Software:
- The BF400 PAN Manager license can be reused; the SW kit for the required release is included
S26361-K1060-V414
This Upgrade Kit does not contain a
BF400 Upgrade Kit, with
chassis. It is used the existing chassis
2x internal Switch Blades
of the System Unit BF400
2x Control Blades EX
1x SW kit with PAN Manager
BC100112R
Available Chassis reused
S26361-F3229-L998
Accessory pack for System Unit
BF400 S2
Contains important information
max. 1x per BF400 Upgrade Kit
S26361-F3240-L110
S26361-F3240-L111
Standard Power Option (PIM-B)
Redundant Power Option (PIM-R)
for input power
for redundant input power
from a single AC power source
from two AC power sources
PMS00102R
PMS00112R
4x per BF400 Upgrade Kit
4x per BF400 Upgrade Kit
S26361-F3240-E13
S26361-F3240-E14
Additinal SFP modules can
Communication Option
Communication Option
be ordered separately to
for the two Control Blades EX
for the two Control Blades EX
change some or all SFPs
4x 2Gbit Fibre Channel ports
4x 2Gbit Fibre Channel ports
from copper to fibre or
4x Gbit Ethernet Fibre ports
4x Gbit Ethernet ports (RJ45)
vice versa in qty 1
4x 10/100/1000 Ethernet (RJ45)
4x 10/100/1000 Ethernet (RJ45)
CB3S0110R
CB3S0111R
2x per BF400 Upgrade Kit
2x per BF400 Upgrade Kit
copper: S26361-F3240-E21
fibre:
S26361-F3240-E22
Note: The different communication options come with all necessary interface modules.
C
Fujitsu Technology Solutions x86 PRIMERGY Server
15 of 20
System configurator and order-information guide
PRIMERGY BladeFrame
Status: 2011-11-30
C
IV
Section
Processing Blades BFi20
Processing Blades with:
- Dual Intel Xeon Processor Support with EM64T
- Different memory configurations with DDR2 DIMM modules
- No internal hard disks
- Different number of processing blades can be installed in
System Unit BF200 (max. 6) and System Unit BF400 / BF400 S2 (max. 24)
The System has to be always
fully populated with
Processing Blades or
Dummy Processing Blades.
See section VIII
max.6x or 24x
max.6x or 24x
S26361-K1061-V240
S26361-K1061-V248
BFi20S5/2X E5506 2.13 4M/8GB
BFi20S5/2X X5570 2.93 8M/36GB
Processing Blade with
Processing Blade with
64-bit Intel Xeon 5506 2.13 GHz
64-bit Intel Xeon 5570 2.93 GHz
includes 2x CPU (Quad Core)
includes 2x CPU (Quad Core)
4MB TLC and 8GB memory
8MB TLC and 36GB memory
occupies one slot
occupies one slot
PB320001R
max. 6x per System Unit BF200
PB320004R
max. 6x per System Unit BF200
max. 24x per S.U. BF400 S2
max. 24x per S.U. BF400 S2
S26361-K1061-V257
S26361-K1061-V258
S26361-K1061-V259
BFi20S6/2X 5670 2.93 12M/24GB
BFi20S6/2X 5670 2.93 12M/36GB
BFi20S6/2X 5670 2.93 12M/72GB
Processing Blade with
Processing Blade with
Processing Blade with
64-bit Intel Xeon 5670 2.93 GHz
64-bit Intel Xeon 5670 2.93 GHz
64-bit Intel Xeon 5670 2.93 GHz
includes 2x CPU (Six Core)
includes 2x CPU (Six Core)
includes 2x CPU (Six Core)
12MB TLC and 24GB memory
12MB TLC and 36GB memory
12MB TLC and 72GB memory
occupies one slot
occupies one slot
occupies one slot
PB320010R
max. 6x per System Unit BF200
PB320011R
max. 6x per System Unit BF200
PB320012R
max. 6x per System Unit BF200
max. 24x per S.U. BF400 S2
max. 24x per S.U. BF400 S2
max. 24x per S.U. BF400 S2
SW License for each additional
Modular SW licenses for each
pBlade need to be ordered for
pBlade need to be ordered
the special
if this special functionality
BF400S2/8pBlade bundle.
for Server or PAN portability
see Software Configuration
is requested
see Software Configuration
to be
continued
on next page
D
Fujitsu Technology Solutions x86 PRIMERGY Server
16 of 20
System configurator and order-information guide
PRIMERGY BladeFrame
Status: 2011-11-30
D
V
Section
Processing Blades BFa20
continued
Processing Blades with:
on previous
- Dual AMD Opteron Processor Support
page
- Different memory configurations with DDR1 DIMM modules
- No internal hard disks
- Different number of processing blades can be installed in
System Unit BF200 (max. 6) and System Unit BF400 / BF400 S2 (max. 24)
The System has to be always fully
S26361-K1061-V314
populated with Processing Blades
BFa20S2/2O 2220SE 2.8 2M/16GB
or Dummy Processing Blades.
Processing Blade with
See section VIII
AMD Opteron (2220SE) 2.8 GHz
max.6x or 24x
includes 2x CPU (Dual Core),
SW License for each additional
2MB SLC and 16GB memory
pBlade need to be ordered for the
occupies one slot
special BF400S2/8pBlade bundle.
PB600002R
max. 6x per System Unit BF200
see Software Configuration
max. 24x per S.U. BF400 S2
Modular SW licenses for each
pBlade need to be ordered if this
special functionality for Server or
PAN portability is requested
see Software Configuration
to be
continued
on next page
E
Fujitsu Technology Solutions x86 PRIMERGY Server
17 of 20
System configurator and order-information guide
PRIMERGY BladeFrame
Status: 2011-11-30
E
VI
Section
Processing Blades BFi40
continued
Processing Blades with
on previous
- Quad Intel Xeon MP Processor Support with EM64T
page
- Different memory configurations with DDR2 DIMM modules
- No internal hard disks
- Different number of processing blades can be installed in
System Unit BF200 (max. 6) and System Unit BF400 S2 (max. 24)
The System has to be always
fully populated with
Processing Blades or
Dummy Processing Blades.
max.6x or 24x
S26361-K1061-V432
S26361-K1061-V434
BFi40S5/4X E7450 2.40 12M/32GB
BFi40S5/4X E7450 2.40 12M/96GB
Processing Blade with
Processing Blade with
SW License for each additional
64-bit Intel Xeon E7450 2.40GHz
64-bit Intel Xeon E7450 2.40GHz
pBlade need to be ordered for
includes 4x CPU (Six Core)
includes 4x CPU (Six Core)
the special
12MB TLC and 32GB memory
12MB TLC and 96GB memory
BF400S2/8pBlade bundle.
occupies one slot
occupies one slot
see Software Configuration
PB400005R
max. 6x per System Unit BF200
PB400007R
max. 6x per System Unit BF200
Modular SW licenses for each
max. 24x per S.U. BF400 S2
max. 24x per S.U. BF400 S2
See section VIII
pBlade need to be ordered
if this special functionality
for Server or PAN portability
to be
continued
is requested
see Software Configuration
on next page
F
Fujitsu Technology Solutions x86 PRIMERGY Server
18 of 20
System configurator and order-information guide
PRIMERGY BladeFrame
Status: 2011-11-30
F
Section
VIII
Dummy Processing Blades
continued
on previous
page
Only allowed, when system is fully populated with Processing Blades
S26361-K1061-V210
Dummy Processing Blade
The System has to be always
for all System Units
Processing Blades or
For remaining slots, when
Dummy Processing Blades
fully populated with
not all slots are populated
with Processing Blades
PB000010R
max. 6x per System Unit BF200
max. 24x per S.U. BF400 S2
End PRIMERGY BladeFrame
Fujitsu Technology Solutions x86 PRIMERGY Server
19 of 20
System configurator and order-information guide
PRIMERGY BladeFrame
Status: 2011-11-30
Change Report
Date
Order number
Changes
2011-10-01
S26361-K1061-V247,
S26361-K1061-V249,
S26361-K1061-V517
S26361-K1061-V257,
S26361-K1061-V258,
S26361-K1061-V259
S26361-K1061-V249
S26361-K1061-V434
S26361-K1061-V432
S26361-K1061-V515
S26361-K1061-V514
S26361-K1061-V513
S26361-K1061-V313
Processing Blades - no longer available
2010-09-01
2009-07-31
2008-11-27
2008-11-27
2008-05-29
2008-05-29
2008-05-29
2008-05-29
2008-03-26
2007-12-11
2007-12-11
2007-12-11
2007-10-26
2007-10-26
2007-09-18
2007-09-18
2007-07-20
2007-07-20
2007-07-20
2007-05-31
2007-04-27
2007-01-25
2007-01-25
2006-11-20
2006-11-20
2006-11-20
2006-09-27
2006-09-16
2006-09-16
2006-09-16
2006-09-16
2006-08-23
2006-08-23
2006-08-23
2006-08-23
2006-08-23
S26361-K1061-V232
S26361-K1061-V231
S26361-K1061-V230
S26361-K1061-V217
S26361-K1061-V216
S26361-K1061-V423
S26361-K1061-V422
S26361-K1061-V220
S26361-F3226-E319
S26361-F3226-E317
S26361-K1060-V32x
S26361-K1061-V222
S26361-K1061-V416
S26361-K1061-V221
S26361-K1061-V511
S26361-K1061-V512
S26361-K1061-V517
S26361-F3226-E320
S26361-K1060-V324
S26361-K1060-V323
S26361-K1060-V322
S26361-K1060-V321
S26361-K1061-V515
S26361-K1061-V514
S26361-K1061-V513
S26361-K1061-V314
S26361-K1061-V313
new Processing Blades - now available
Processing Blade with 64-bit Intel X5570 2.93 8M/72GB - now available
Processing Blade with 64-bit Intel Xeon E7450 2.40GHz - now available
Processing Blade with 64-bit Intel Xeon E7450 2.40GHz - now available
Processing Blade with AMD Opteron (8216) 2.4 GHz - no longer available
Processing Blade with AMD Opteron (8216) 2.4 GHz - no longer available
Processing Blade with AMD Opteron (8216) 2.4 GHz - no longer available
Processing Blade with AMD Opteron (2216) 2.4 GHz - no longer available
New Order numbers for PAN-SW (DEMO and Evalution)
Processing Blade with 64-bit Intel Xeon E5450 3.00 GHz 32 GB - now available
Processing Blade with 64-bit Intel Xeon E5450 3.00 GHz 16 GB - now available
Processing Blade with 64-bit Intel Xeon E5410 2.33 GHz 8 GB - now available
Processing Blade with 64-bit Intel Xeon 5160 3.00GHz - no longer available
Processing Blade with 64-bit Intel Xeon 5160 3.00GHz - no longer available
Processing Blade with 64-bit Intel Xeon X7350 2.93GHz 64GB - now available
Processing Blade with 64-bit Intel Xeon X7350 2.93GHz 32GB - now available
Processing Blade with 64-bit Intel Xeon 5355 2.66 GHz 8 GB - now available
PY BF400 SW Basis Set (8 pBlades) - no longer available
PY BF400 SW Licence (8 pBlades) - no longer available
Bundle option 1 bis 4: BF200 4/4, SW, 6 pBlades (Intel,AMD) - no longer available
Processing Blade with 64-bit Intel Xeon 5355 2.66 GHz 32 GB - now available
Processing Blade with 64-bit Intel Xeon 7140M 3.4GHz - now available
Processing Blade with 64-bit Intel Xeon 5355 2.66 GHz - now available
Processing Blade with AMD Opteron (852) 2.6 GHz - no longer available
Processing Blade with AMD Opteron (875) 2.2 GHz - no longer available
Processing Blade with AMD Opteron (2220SE) 2.8 GHz - now available
Automatization of purchase order processing - no longer necessary
Bundle option 4: BF200 4/4f, SW, 6 pBlades (AMD) - now available
Bundle option 3: BF200 4/4c, SW, 6 pBlades (AMD) - now available
Bundle option 2: BF200 4/4f, SW, 6 pBlades (Intel) - now available
Bundle option 1: BF200 4/4c, SW, 6 pBlades (Intel) - now available
Processing Blade with AMD Opteron (2216) 2.4 GHz - now available
Processing Blade with AMD Opteron (2216) 2.4 GHz - now available
Processing Blade with AMD Opteron (2216) 2.4 GHz - now available
Processing Blade with AMD Opteron (2220SE) 2.8 GHz - now available
Processing Blade with AMD Opteron (2216) 2.4 GHz - now available
Fujitsu Technology Solutions x86 PRIMERGY Server
20 of 20