Fujitsu PRIMERGY Econel 100 S2

®
System Configuration and Order-information Guide
ECONEL 100 S2
March 2009
PRIMERGY ECONEL 100 S2
Front View
DVD-ROM Drive
5 inch Bay
Floppy Disk Drive
Back View
Mouse
Keyboard
Serial Port
Display
10/100/1000BASE-T Connector
Inside View
Power Supply
Hard Disk Bay
DIMM Slot
CPU
PCI Slot
front side
PRIMERGY ECONEL 100 S2
Instruction
This document contains basic product and configuration information that will
enable you to configure your system.
Only these tools will ensure a fast and proper configuration of your PRIMERGY server.
You can configure your individual PRIMERGY server in order to meet your specific
requirements.
Please follow the lines. If there is a junction, you can choose which way
or component you would like to take.
Go through the configurator by following the lines from the top to the bottom.
The color of the junction means as follows.
Key to
Or
And
PRIMERGY ECONEL 100 S2
Data Sheet
Type
Mono-Processor Tower Server
Model
Base Unit
CPU
3.5inch SATA model
Pentium® E2200(2.20GHz)
PGUE1026B
Celeron® 430(1.80GHz)
PGUE1021B2
TM
Frequencies
Intel® Xeon® E3120(3.16GHz) *5 / E3110(3GHz) *6 / Intel® Core 2 Duo E7300(2.66GHz) *7 /
Intel® Pentium® E2200(2.20GHz) / Intel® Celeron® 430(1.80GHz)
Second-Level-Cache
6MB (Intel® Xeon® E3120(3.16GHz) / E3110(3GHz)) /
3MB (Intel® Core
Number of processors
Number of cores
TM
2 Duo E7300(2.66GHz)) / 1MB (Intel® Pentium® E2200(2.20GHz)) /
512KB (Intel® Celeron® 430(1.80GHz))
1 (max. 1)
2 per processor (Intel® Xeon® E3120(3.16GHz) / E3110(3GHz) / Intel® Core
Intel® Pentium® E2200(2.20GHz)) /
1 per processor (Intel® Celeron® 430(1.80GHz))
Front-Side-Bus
TM
2 Duo E7300(2.66GHz) /
1333MHz (Intel® Xeon® E3120(3.16GHz) / E3110(3GHz) ) /
TM
1066MHz (Intel® Core 2 Duo E7300(2.66GHz) /
800MHz (Intel® Pentium® E2200(2.20GHz) / Intel® Celeron® 430(1.80GHz))
Chipset
Intel® 3200
TPM (Trusted Platform Module)
Memory
standard (onboard) *8
Standard
1GB (1GB ECC DDR2 SDRAM DIMM x 1)
Maximum *1
8GB (2GB ECC DDR2 SDRAM DIMM x 4)
Graphics Controller
ATI ES1000, VRAM : 32MB (PCI)
Resolution *2
640x480/800x600/1024x768/1280x1024 dot
Internal Bays
Number of bays
3.5 inch
Available HDD *3
4
3.5inch, SATA, 7.2krpm, 80.0GB (PG-HDE87A)
HDD
(SATA)
3.5inch, SATA, 7.2krpm, 160.0GB (PG-HDE67A)
3.5inch, SATA, 7.2krpm, 500.0GB (PG-HDE57A)
Maximum *3
2.0TB ( 500.0GB x 4 )
Internal Bays 5inch
2 (1 free bay)
DVD-ROM
PCI Slots
Max 16 DVD-ROM / Max 40 CD-ROM (SATA)
PCI Express (x8) [x8]
1
PCI Express (x4) [x8]
1
PCI Express (x1) [x8]
1
PCI (32bit/33MHz) [3.3V]
1
Software RAID
RAID
SATA x 4ports
SATA Interface (onboard)
Internal FDD
3.5inch (1.44MB/720KB)
Network Interface (onboard)
1 port (1000BASE-T/100BASE-TX/10BASE-T)
Interfaces
Display (Analog RGB), Serial Port (D-SUB 9pins)
Parallel Port (optional, D-SUB 25pins) (1 when Parallel Port (PG-PP08) is applied.)
Keyboard (PS/2type Mini DIN 6pins), Mouse (PS/2type Mini DIN 6pins), USB x 9 (ver. 2.0) (Internal : x 1,External : x 8)
Server Management Software
Power supply
ServerView (standard)
Voltage
AC 100-127V (50/60Hz) / AC 200-240V (50/60Hz) x 1 (max. 1)
Power consumption
178W /640.8kJ/h (max.)
Redundant power supply
-
Redundant Fan
-
Dimensions (mm)
203 (W) x 386 (D) x 390 (H)
Weight
16.2kg (max.)
Temperature10-35°C / Humidity 20-80% (non condensing )
Environmental Conditions
OS Support *4
Windows Server® 2008 Standard (32-bit) / Windows Server® 2008 Standard (64-bit)
Windows Server® 2003 R2, Standard Edition (SP2) / Windows Server® 2003, Standard Edition (SP2)
Windows Server® 2003 R2, Standard x64 Edition (SP2) / Windows Server® 2003, Standard x64 Edition (SP2)
Windows® Small Business Server 2003 R2 (SP2) / Windows® Small Business Server 2003 (SP2)
Red Hat Enterprise Linux ES (v.4 for x86) *9 / Red Hat Enterprise Linux 5 (for x86) *9 *10
Red Hat Enterprise Linux ES (v.4 for EM64T) *9 / Red Hat Enterprise Linux 5 (for Intel64) *9 *10
Attached tool (Standard)
ServerStart (Setup Support tool) *11
*1. Available memory capacity will be changed by the type of OS. Please find more details in Notes[Memory OS Compatibility List].
*2. Resolution is determined by functions of the display monitor and OS.
3
4
*3. HDD capacity is calculated according to the formulas 1GB=1000 byte and 1TB=1000 byte.
*4. Drivers for Linux are not attached. Please download and use drivers of the following URL.
http://www.fujitsu.com/global/services/computing/server/ia/driver/
*5. CPU Conversion kit: Pentium E2200(2.20GHz) -> Xeon E3120(3.16GHz) (PGBFU50L) is available for upgrading to Intel® Xeon® E3120(3.16GHz).
*6. CPU Conversion kit: Pentium E2200(2.20GHz) -> Xeon E3110(3GHz) (PGBFU50K) is available for upgrading to Intel® Xeon® E3110(3GHz).
*7. CPU Conversion kit: Pentium E2200(2.20GHz) -> Core 2 Duo E7300(2.66GHz) (PGBUFU50P) is available for upgrading to Intel® Core
*8. TPM is available for BitLocker
TM
Drive Encryption of Windows Server® 2008.
*9. Regarding supported kernel versions of Linux, please refer to the following list.
http://www.fujitsu.com/downloads/PRMRGY/linux-os-kernel-compatibility-list.pdf
*10. VM (Virtual Machine) function is not supported.
*11. ServerStart doesn't support Linux.
*. Noise level is 21dB.
TM
2 Duo E7300(2.66GHz).
PRIMERGY ECONEL 100 S2
Configuration Diagram
5 inch Bay 2
DVD-ROM Drive
Power Supply Unit
Memory
< 3.5inch SATA model >
Hard Disk 3.5inch Bay
Standard Drive Cage( HDD x 4ports )
5 inch Bay 1
DIMM Slot 2B
DIMM Slot 1B
3.5 inch FDD
Bay 1
SATA
3.5 inch HDD Bay 4
Bay 2
SATA
DIMM Slot 2A
DIMM Slot 1A
CPU
Xeon®
E3120 / E3110 /
3.5 inch HDD Bay 3
TM
Core 2 Duo
E7300 /
Pentium®
E2200 /
Celeron®
430
Bay 3
SATA
3.5 inch HDD Bay 2
3.5 inch HDD Bay 1
Bay 4
SATA
PCI Slots
PCI4 PCI Express (x1)
PCI3 PCI Express (x8)
PCI2 PCI Express (x4)
PCI1 PCI 32bit/33MHz
*Components installed as standard configuration marked in grey.
Mountable I/O Options
[ 3.5inch SATA model ]
PCI Slot
Mount Priority
Mountable Cards
Bus
1
PCI
32bit/
33MHz
3.3V
High
Low
SAS RAID Ctrl w/ Cable
PG-248BC
( 8ports / 256MB / without BBU )
PCI Express (x4)
Eth. Ctrl 1x1Gbit PCI
1000-BASE-T
PG-1853
PCI/32bit
Eth. Ctrl 1x1Gbit PCI-E
1000-BASE-T
PG-285
PCI Express (x1)
Parallel Port
PG-PP08
-
2
3
4
PCI Express
x4
x8
x1
lane
lane
lane
Full Height
x8 socket
Max No.of Mount
Remarks
-
-
[1]
-
1
Internal array
[1]
-
-
-
1
No AFT/ALB Support
-
[1]
-
-
1
No AFT/ALB Support
-
-
-
[1]
1
* [n] : Installation Priority
*-
: cannot be installed
Notes on SATA HDD
1. ECONEL 100 S2 (3.5inch SATA model) can be used on a small scale without frequent data access about eight hours a day, for five years.
2. If you would like to use server 24 hours a day, every day, or for database with frequent data access, or for mission-critical tasks which require high reliability,
please purchase another SAS model.
3. Please backup data on a regular basis to prevent loss of data.
4. Dump function of Linux is not available for ECONEL 100 S2 (3.5inch SATA model). If you would like to use dump function of Linux, please purchase another SAS model.
Connection Table
*CPU Conversion kit (available only as a Configure To Order (CTO) option; no separate shipment is possible)
Type
Pentium E2200(2.20GHz)
Remarks
Product ID
CPU Conversion kit:
Intel® Pentium® E2200(2.20GHz/1MB) -> Intel® Xeon® E3120(3.16GHz/6MB)
PGBFU50L
Convert the CPU installed as standard in the base unit to the other.
-> Xeon E3120(3.16GHz)
(Note: This option can be ordered only as coupled with the base unit.
(for CTO)
A separate shipment is not possible.)
CPU Conversion kit:
Intel® Pentium® E2200(2.20GHz/1MB) -> Intel® Xeon® E3110(3GHz/6MB)
Pentium E2200(2.20GHz)
PGBFU50K
Convert the CPU installed as standard in the base unit to the other.
-> Xeon E3110(3GHz)
(Note: This option can be ordered only as coupled with the base unit.
(for CTO)
A separate shipment is not possible.)
CPU Conversion kit:
Intel® Pentium® E2200(2.20GHz/1MB) -> Intel® Core
Pentium E2200(2.20GHz)
Convert the CPU installed as standard in the base unit to the other.
PGBUFU50P
TM
2 Duo E7300(2.66GHz/3MB)
-> Core 2 Duo E7300(2.66GHz)
(Note: This option can be ordered only as coupled with the base unit.
(for CTO)
A separate shipment is not possible.)
PRIMERGY ECONEL 100 S2
Memory
Max: 8GB (2GB DIMM x 4)
Memory Module-1GB (1GB DIMM x 1)
Standard Memory Module: 1GB (1GB DIMM x 1)
PGBRM1BH (for CTO)
PG-RM1BH
Memory Slot
* Only one Memory Module can be ordered by CTO.
Memory Module-2GB (2GB DIMM x 1)
PG-RM2BH
PGBRM2BH (for CTO)
Memory Module Conversion kit (for CTO)
Memory Module Conversion kit-2GB (2GB DIMM x 1)
Memory Slot
PGBRU2BH2 (for CTO)
*. Notes on installing memory
1. Memory is installed by one or more DIMMs.
2. The memory capacities of the slots should be in ascending order in the following sequence:
1A -> 1B -> 2A -> 2B
3. Available memory capacity depends on the type of OS and some memory area is used for PCI resource management.
The following table shows installed memory capacity and available memory capacity.
Installed Memory
Capacity
OS
Windows Server® 2008 Standard (32-bit)
Windows Server® 2003 R2, Standard Edition (SP2)
Windows Server® 2003, Standard Edition (SP2)
Windows® Small Business Server 2003 R2 (SP2)
Windows® Small Business Server 2003 (SP2)
~2.0GB
2.0GB~4.0GB
Available Memory Capacity
Same as installed memory capacity
2.0GB *1
Windows Server® 2008 Standard (64-bit)
Windows Server® 2003 R2, Standard x64 Edition (SP2)
Windows Server® 2003, Standard x64 Edition (SP2)
~8.0GB
Red Hat Enterprise Linux ES (v.4 for x86)
Same as installed memory capacity
Red Hat Enterprise Linux 5 (for x86)
Red Hat Enterprise Linux ES (v.4 for EM64T)
Red Hat Enterprise Linux 5 (for Intel64)
*1. If installed memory capacity is more than 2.0GB, it is necessary to set "PAE (Physical Address Extension)" of OS.
The following (1) and (2) are the ways to set "PAE" of OS, and Fujitsu recommends (1).
(1) Set "PAE" of OS.
Regarding setting "PAE" of OS, please refer to website of Microsoft.
(2) Set "DPE (Data Execution Prevention)" of CPU.
If "DPE" of CPU is set as "available" by executing the following procedure, "PAE" of OS is set automatically.
[1] Execute "BIOS setup utility".
[2] Select "Advanced" menu.
[3] Select "Advanced Processor" submenu.
[4] Set "NX Memory Protection" as "Enabled".
Connecting Internal HDD and Internal Backup Devices
If you would like to order internal HDD and internal backup devices, please order optional cards/cables according to the following table.
Type of HDD connection
Connection
Interface
SATA / RAID
Onboard SATA Controller
RAID
SAS RAID Controller
Internal Backup Devices PRIMERGY ECONEL 100 S2
USB (''1) Connection
USB Cable (PG-CBLU005/PGBCBLU005)
(''1) USB Backup Devices: PG-DT5043/PG-RD1021
[ 3.5inch SATA model ]
Internal HDD
SATA / RAID Configuration
Max: 4 HDDs
on board
HDD SATA 7.2k 80GB 3.5inch
SATA
PG-HDE87A
controller
PGBHDE87A (for CTO)
*. 2 sets of RAID1 configuration can be set.
HDD SATA 7.2k 160GB 3.5inch
PCI Express
PG-HDE67A
Bus
PGBHDE67A (for CTO)
SAS RAID Ctrl w/ Cable
( 8ports / 256MB / without BBU )
HDD SATA 7.2k 500GB 3.5inch
PG-248BC
PG-HDE57A
PGB248BC (for CTO)
PGBHDE57A (for CTO)
*. RAID 0/1/1+0/5/6 configuration can be set.
PRIMERGY ECONEL 100 S2
Internal backup device (USB)
Tape Drv DAT72 36GB internal
USB Interface
PG-DT5043
(internal)
PGBDT5043 (for CTO)
*. One internal backup device can be mounted.
USB Cable
PG-CBLU005
PGBCBLU005 (for CTO)
Internal Data Cartridge Drive Unit
PG-RD1021
PGBRD1021 (for CTO)
*. One internal backup device can be mounted.
*. If you would like to purchase data cartridges,
please refer to the following web site.
http://www.tandbergdata.com/sales-apac.html
External DVD-RAM/DVD-ROM/CD-ROM
USB Interface
DVD-RAM / DVD-ROM / CD-ROM
USB Extension Cable
PG-CBLU002
LAN Card
On-board LAN
Eth. Ctrl 1x1Gbit PCI-E 1000-BASE-T
PCI Express
PG-285
Bus
PGB285 (for CTO)
Twist Pair Cable ( Category 5e)
* No AFT/ALB Support
*. Supported versions of Linux are 5.2 or later and 4.7 or later.
Eth. Ctrl 1x1Gbit PCI 1000-BASE-T
PCI Bus
PG-1853
Twist Pair Cable ( Category 5e)
PGB1853 (for CTO)
* No AFT/ALB Support
Parallel Port Option
Parallel Port
PCI Slot
PG-PP08
*. This option occupies one PCI slot.
Specifications are subject to change without notice. For the latest detailed information, contact your local representative.
All brand names and product names are trademarks and registered trademarks of their respective holders.
©2008 Fujitsu Limited. All rights reserved. Printed in Japan.