bintec W500
The bintec W500 is the entry model for small companies and home offices and enable the user to set up a simple and
cost optimized secure wireless network access. The unit supports the 802.11g standard with 54Mbps. The WPA-/WPA2
security Mode ensures for security at highest level for private and business applications.
The bintec W500 works as Access Point and can also operate as Wifi-Client. In Wifi-Client operation any device there
has a Ethernet port can be connect to the wireless network. Nevertheless the bintec W500 can operate as a repeater or
can be used to set up Bridge Links. The smoothly integration in the LAN the 10/100 Base-T-interface supports
crossover (Auto-MDI/MDI-X). The binding from Wifi clients to the bintec W500 is very simple and cost only a few
seconds when the Wifi client supports also WPS.
With the 5dBi omni-directional antenna there come with the bintec W500 you already achieved excellent coverage. The
detachable antenna can be replaced by an external high gain beam antenna to improve the coverage for point to point
connections.
The bintec W500 is made for customers there not accept compromises in security, stability or functionality for low
budget units.
Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - (0)911 9673 0
Fax: +49 - (0)911 688 0725
E-Mail: info@funkwerk-ec.com - www.funkwerk-ec.com
bintec W500
08.09.2010
Subject to technical
alterations
Wireless LAN Features
Feature
Description
Operation mode
Selectable: Access Point, Wireless Client (Ethernet Adapter), AP+Repeater (WDS), Bridge
Standards
802.11g,b
Frequency
2,412 to 2,472 GHz
Channels
1 - 13
Data rates
Modulation: 11, 5,5, 2 und 1 Mbps (DSSS); 54, 48, 36, 24, 18, 12, 9 and 6 Mbps (OFDM)
Transfer rate
Automatic fallback or selectable transfer rate
Super-G Mode
Support the Atheros Super-G Mode (108Mbps) together with a compatible client (i.e. funkwerk
W-Client USB.11abg)
Transmit power
Maximum 14dB + 5dB antenna gain; Selectable in 5 steps
Receiver Sensitivity
802.11g 54Mbps = -65dBm; 802.11b 11Mbps = -80dBm
Modulation
802.11g (OFDM) 64QAM, 16QAM, QPSK, BPSK; 802.11b (DSSS) CCK,DQPSK, DBPSB
Antenna
5dBi omni-directional antenna, detachable; At the unit is a RSMA connector (male)
Wireless Distribution System (WDS)
Supported; Security: WEP, WPA, WPA-2
Automatic Rate Selection (ARS)
Supported
Wireless Protected Setup (WPS)
Pin Client, Pin AP, Push-Button Method
WMM (Wi-Fi Multimedia)
Supported
Maximum number of Client
1 - 32
Maintenance and Service
Feature
Description
GUI
Web-GUI in German and English language
Compoint Manager Support
yes
WMS Support
The W500 is not supported by WiLMA
Statistic
Log file; Statistics of all relevant packet types; List of all associated Wifi clients
Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - (0)911 9673 0
Fax: +49 - (0)911 688 0725
E-Mail: info@funkwerk-ec.com - www.funkwerk-ec.com
bintec W500
08.09.2010
Subject to technical
alterations
Hardware Features
Feature
Description
LAN Interface
10/100Base-T Ethernet, Full duplex with Auto MDI/MDIX support; fixed IP Address or DHCP
Client
Power supply
12V/1A DC via wall adapter
Power supply unit
Wide range switched powered wall adapter 100-240V AC 50/60Hz
Power consumption
3,5 Watt
Reset Button
Set the device to back factory settings
LEDs
Operation, LAN Link, Wifi active, WPS
Dimensions
110 x 125 x 30 mm (length x wide x height)
Wall mounting
Integrated in the housing design
Environment - Operation
0-50° C
Environment - Storage
-10-65° C
Certification
R&TTE Directive 1999/5/EG; EN 60950-1; EN 300 328 V1.6.1; ETSI EN 301 489-1 V1.5.1;
ETSI EN 301 489-1/17 V1.2.1; EN 50371
max.90% humidity (not condensing)
5-95% humidity
Security
Feature
Description
Standards
WEP (64,128,154bit), WPA, WPA2, 802.1x
Network Name (SSID)
Changeable and visibility on/off
Access Control List (ACL)
Up to 32 MAC Addresses as White List or as Black List
Intercell Repeating
On/off (Allow or disallow the communication between associated Wifi client)
WLAN on/off
Supported
Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - (0)911 9673 0
Fax: +49 - (0)911 688 0725
E-Mail: info@funkwerk-ec.com - www.funkwerk-ec.com
bintec W500
08.09.2010
Subject to technical
alterations