Cisco 2811 Ethernet LAN Multi

Data Sheet
Cisco 2800 Series Integrated Services Routers
®
Cisco Systems , Inc. redefined best-in-class enterprise and small- to- midsize business routing with a new line of
integrated services routers that are optimized for the secure, wire-speed delivery of concurrent data, voice, video,
®
and wireless services. Founded on 20 years of leadership and innovation, the Cisco 2800 Series of integrated
services routers (refer to Figure 1) intelligently embed data, security, voice, and wireless services into a single,
resilient system for fast, scalable delivery of mission-critical business applications. The unique integrated systems
architecture of the Cisco 2800 Series delivers maximum business agility and investment protection.
Figure 1.
Cisco 2800 Series
Product Overview
The Cisco 2800 Series comprises four platforms (refer to Figure 1): the Cisco 2801, the Cisco 2811, the Cisco 2821,
and the Cisco 2851. The Cisco 2800 Series provides significant additional value compared to prior generations of
Cisco routers at similar price points by offering up to a fivefold performance improvement, up to a tenfold increase in
security and voice performance, embedded service options, and dramatically increased slot performance and
density while maintaining support for most of the more than 90 existing modules that are available today for the
Cisco 1700, Cisco 2600, and Cisco 3700 Series.
The Cisco 2800 Series features the ability to deliver multiple high-quality simultaneous services at wire speed up to
multiple T1/E1/xDSL connections. The routers offer embedded encryption acceleration and on the motherboard
voice digital-signal-processor (DSP) slots; intrusion prevention system (IPS) and firewall functions; optional
integrated call processing and voice mail support; high-density interfaces for a wide range of wired and wireless
connectivity requirements; and sufficient performance and slot density for future network expansion requirements
and advanced applications.
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 14
Data Sheet
Secure Network Connectivity for Data, Voice, and Video
Security has become a fundamental building block of any network. Routers play an important role in any network
defense strategy because security needs to be embedded throughout the network. The Cisco 2800 Series features
advanced, integrated, end-to-end security for the delivery of converged services and applications. With the Cisco
®
IOS Software Advanced Security feature set, the Cisco 2800 provides a robust array of common security features
such as a Cisco IOS Software Firewall, intrusion prevention, IPSec VPN, Secure Socket Layer (SSL) VPN, advanced
application inspection and control, Secure Shell (SSH) Protocol Version 2.0, and Simple Network Management
Protocol (SNMPv3) in one secure solution set. Additionally, by integrating security functions directly into the
router itself, Cisco can provide unique intelligent security solutions other security devices cannot, such as network
admissions control (NAC) for antivirus defense; Voice and Video Enabled VPN (V3PN) for quality-of-service (QoS)
enforcement when combining voice, video, and VPN; and Dynamic Multipoint VPN (DMVPN), Group Encrypted
Transport (GET) VPN, and Easy VPN for enabling more scalable and manageable VPN networks. In addition,
Cisco offers a range of security acceleration hardware such as the intrusion-prevention network modules and
advanced integration modules (AIM) for encryption, making the Cisco 2800 Series the industry's most robust
and adaptable security solution available for branch offices. As Figure 2 demonstrates, using a Cisco 2800 Series
uniquely enables customers to deliver concurrent, mission-critical data, voice, and video applications with integrated,
end-to-end security at wire-speed performance.
Converged IP Communications
As shown in Figure 2, the Cisco 2800 Series can meet the IP Communications needs of small-to-medium sized
business and enterprise branch offices while concurrently delivering an industry-leading level of security within a
single routing platform. Cisco CallManager Express (CME) is an optional solution embedded in Cisco IOS Software
that provides call processing for Cisco IP phones, including wired and cordless WLAN phones. This solution is for
customers with data-connectivity requirements interested in deploying a converged IP telephony solution for up to
96 IP phones. With the Cisco 2800 Series, customers can securely deploy data, voice, and IP telephony on a single
platform for their small-to-medium sized branch offices, helping them to streamline their operations and lower their
network costs. The Cisco 2800 Series with optional Cisco CME support offers a core set of phone features that
customers require for their everyday business needs and takes advantage of the wide array of voice capabilities that
are embedded in the Cisco 2800 Series (as shown in Table 1) together with optional features available in Cisco IOS
Software to provide a robust IP telephony offering for the small to medium-sized branch-office environment.
Wireless Services
The Cisco 2800 Series can provide a complete wireless solution for branch offices, small/medium sized businesses,
and Wi-Fi hotspots. Wireless services enable greater mobility for employees, partners, and customers, resulting in
increased productivity. The Cisco 2800 Series supports an integrated access point for wireless LAN connectivity,
Wi-Fi Hotspot services for public access, wireless infrastructure services for cordless WLAN telephony and for
larger sites, and land mobile radio over IP for radio users.
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 14
Data Sheet
Integrated Services
Figure 2 also highlights the fact that with the unique integrated services architecture of the Cisco 2800 Series,
customers can now securely deploy IP Communications with traditional IP routing while leaving interface and
module slots available for additional advanced services. With the optional integration of a wide array of services
modules, the Cisco 2800 Series offers the ability to easily integrate the functions of standalone network appliances
and components into the Cisco 2800 Series chassis itself. Many of these modules, such as the Cisco Network
Analysis Module, Cisco Voice Mail Module, Cisco Intrusion Detection Module, Wide Area Application Services
Module, and Cisco Content Engine Module, have embedded processors and hard drives that allow them to run
largely independently of the router while allowing management from a single management interface. This flexibility
greatly expands the potential applications of the Cisco 2800 Series beyond traditional routing while still maintaining
the benefits of integration. These benefits include ease of management, lower solution costs (CAPEX and OPEX),
and increased speed of deployment.
Applications
Secure Network Connectivity with Converged IP Communications
Figure 2.
Secure Network Connectivity with Converged IP Communications
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 14
Data Sheet
Architecture-Features and Benefits
The Cisco 2800 Series architecture has been designed specifically to meet the expanding requirements of enterprise
branch offices and small-to-medium-sized businesses for today's and future applications. The Cisco 2800 Series
provides the broadest range of connectivity options in the industry combined with leading-edge availability and
reliability features. In addition, Cisco IOS Software provides support for a complete suite of transport protocols,
Quality-of-Service (QoS) tools, and advanced security and voice applications for wired and wireless deployments.
Table 1.
Architecture-Features and Benefits
Feature
Benefit
Modular Architecture
● A wide variety of LAN and WAN options are available. Network interfaces can be upgraded in the
field to accommodate future technologies.
● Several types of slots are available to add connectivity and services in the future on an "integrateas-you-grow" basis.
● The Cisco 2800 supports more than 90 modules, including WICs, VICs, network modules, PVDMs,
and AIMs (Note: the Cisco 2801 router does not support network modules).
Embedded Security Hardware
Acceleration
● Each of the Cisco 2800 Series routers comes standard with embedded hardware cryptography
accelerators, which when combined with an optional Cisco IOS Software upgrade help enable WAN
link security and VPN services.
Integrated Dual Fast Ethernet or Gigabit
Ethernet Ports
● The Cisco 2800 Series provide two 10/100 on the Cisco 2801 and Cisco 2811 and two 10/100/1000
on the Cisco 2821 and Cisco 2851
Support for Cisco IOS Software
● The Cisco 2800 helps enable end-to-end solutions with full support for the latest Cisco IOS
Software-based QoS, bandwidth management, and security features.
● Common feature and command set structure across the Cisco 1700, 1800, 2600, 2800, 3700 and
3800 series routers simplifies feature set selection, deployment, management, and training.
Optional Integrated Power Supply for
Distribution of Power Over Ethernet (PoE)
● An optional upgrade to the internal power supply provides in-line power (802.3af-compliant Powerover-Ethernet [PoE] and Cisco standard inline power) to optional integrated switch modules.
Optional Integrated Universal DC Power
Supply
● On the Cisco 2811, 2821, and 2851 routers an optional DC power supply is available that extends
possible deployments environments such as central offices and industrial environments (Note: not
available on the Cisco 2801).
Integrated Redundant-Power-Supply
(RPS) Connector
● On the Cisco 2811, 2821, and 2851 there is a built in external power-supply connector that eases
the addition of external redundant power supply that can be shared with other Cisco products to
decrease network downtime by protecting the network components from downtime due to power
failures.
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 14
Data Sheet
Modularity-Features and Benefits
The Cisco 2800 Series provides significantly enhanced modular capabilities (refer to Table 2) while maintaining
investment protection for customers. The modular architecture has been redesigned to support increasing bandwidth
requirements, time-division multiplexing (TDM) interconnections, and fully integrated power distribution to modules
supporting 802.3af PoE or Cisco in-line power, while still supporting most existing modules. With more than 90
modules shared with other Cisco routers such as the Cisco 1700, 1800, 2600, 3700, and 3800 series, interfaces for
the Cisco 2800 Series can easily be interchanged with other Cisco routers to provide maximum investment
protection in the case of network upgrades. In addition, taking advantage of common interface cards across a
network greatly reduces the complexity of managing inventory requirements, implementing large network rollouts,
and maintaining configurations across a variety of branch-office sizes.
Table 2.
Modularity-Features and Benefits
Feature
Benefit
Enhanced Network-Module (NME) Slots
● The NME slots support existing network modules (Note: NM and NME support on Cisco 2811,
2821, and 2851 only)
● NME Slots offer high data throughput capability (up to 1.6Gbps) and support for Power over
Ethernet (POE).
● NME slots are highly flexible with support for extended NMEs (NME-X on Cisco 2821 and 2851
only) and enhanced double-wide NMEs (NME-XDs) (Note: Cisco 2851 only).
High-Performance WIC (HWIC) Slots
with Enhanced Functionality
● Four integrated HWIC slots on Cisco 2811, 2821, and 2851 and two integrated HWIC slots on
Cisco 2801 allow for more flexible and dense configurations.
● HWICs slots can also support WICs, VICs, and VWICs
● HWIC slots offer high data throughput capability (up to 400 Mbps half duplex or 800 Mbps
aggregate throughput) and Power over Ethernet (POE) support.
● A flexible form factor supports up to two double-wide HWIC (HWIC-D) modules.
Dual AIM Slots
● Dual AIM slots support concurrent services such as hardware-accelerated security, ATM
segmentation and reassembly (SAR), compression, and voice mail (Refer to Table 7 for more
details on specific platform support).
Packet Voice DSP Module (PVDM) Slots
on Motherboard
● Slots for Cisco PVDM2 Modules (DSP Modules) are integrated on the motherboard, freeing slots on
the router for other services.
Extension-Voice-Module (EVM) Slot
● The EVM supports additional voice services and density without consuming the network-module slot
(Note: available only on Cisco 2821 and 2851).
USB Support
● Up to two USB ports are available per Cisco 2800 series router. The routers' Universal Serial Bus
(USB) ports enable important security and storage capabilities.
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 14
Data Sheet
Secure Networking-Feature and Benefits
The Cisco 2800 Series features enhanced security functionality as shown in Table 3. Integrated on the motherboard
of every Cisco 2800 Series router is hardware-based encryption acceleration that offloads the encryption processes
to provide greater IPSec throughput with less overhead for the router CPU when compared with software-based
solutions. With the integration of optional VPN modules (for enhanced VPN tunnel count), Cisco IOS Software-based
firewall, network access control, or content-engine network modules, Cisco offers the industry's most robust and
adaptable security solution for branch-office routers.
Table 3.
Secure Networking-Feature and Benefits
Feature
Benefit
Cisco IOS Software Firewall
Sophisticated security and policy enforcement provides features such as stateful, application-based
filtering (context-based access control), per-user authentication and authorization, real-time alerts,
transparent firewall, and IPv6 firewall.
Secure Sockets Layer (SSL)
SSL provides security for web transactions by handling authentication, data enryption and digital
signatures. The 2800 Series supports SSL VPNs and SSL acceleration via the AIM-VPN/SSL-3.
Onboard VPN Encryption Acceleration
The Cisco 2800 Series supports IPSec Digital Encryption Standard (DES), Triple DES (3DES),
Advanced Encryption Standard (AES) 128, AES 192, and AES 256 cryptology without consuming an
AIM slot.
Network Admissions Control (NAC)
A Cisco Self-Defending Network initiative, NAC seeks to dramatically improve the ability of networks to
identify, prevent, and adapt to threats by allowing network access only to compliant and trusted
endpoint devices.
Multiprotocol Label Switching (MPLS)
VPN Support
The Cisco 2800 Series supports specific provider edge functions plus a mechanism to extend
customers' MPLS VPN networks out to the customer edge with virtual routing and forwarding (VRF)
firewall and VRF IPSec. For details on the MPLS VPN support on the different versions of the Cisco
2800 Series, please check the feature navigator tool on http://www.cisco.com.
USB eToken Support
USB eTokens from Aladdin Knowledge Systems (available at http://www.aladdin.com/etoken/cisco/)
provides secure configuration distribution and allows users to store VPN credentials for deployment
AIM-Based Security Acceleration
Support for an optional dedicated security AIM can deliver 2 to 3 times the performance of embedded
encryption capabilities with Layer 3 compression.
Intrusion Prevention System (IPS)
Flexible and high performance support is offered through Cisco IOS Software or an intrusion-detectionsystem (IDS) network module.
®
The ability to load and enable selected IDS signatures in the same manner as Cisco IDS Sensor
Appliances
Advanced Application Inspection and
Control
Cisco IOS Firewall includes HTTP and several email inspection engines that can be used to detect
misuse of port 80 and email connectivity.
Cisco Easy VPN Remote and Server
Support
The Cisco 2800 Series eases administration and management of point-to-point VPNs by actively
pushing new security policies from a single headend to remote sites.
Dynamic Multipoint VPN (DMVPN)
DMVPN is a Cisco IOS Software solution for building IPSec + generic routing encapsulation (GRE)
VPNs in an easy and scalable manner.
Group Encrypted Transport (GET) VPN
GET VPN is a Cisco IOS Software solution that simplifies securing large Layer 2 or MPLS networks
requiring partial or full-mesh connectivity by providing tunnel-less VPN connectivity.
URL Filtering
URL filtering is available onboard with an optional content-engine network module or external with a PC
server running the URL filtering software.
Cisco Router and Security Device
Manager (SDM)
This intuitive, easy-to-use, Web-based device-management tool is embedded within the Cisco IOS
Software access routers; it can be accessed remotely for faster and easier deployment of Cisco routers
for both WAN access and security features.
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 14
Data Sheet
IP Telephony Support-Features and Benefits
The Cisco 2800 Series allows network managers to provide scalable analog and digital telephony without investing
in a one-time solution (refer to Table 4 for more detail), allowing enterprises greater control of their converged
telephony needs. Using the voice and fax modules, the Cisco 2800 Series can be deployed for applications ranging
from voice-over-IP (VoIP) and voice-over-Frame Relay (VoFR) transport to robust, centralized solutions using the
Cisco Survivable Remote Site Telephony (SRST) solution or distributed call processing using Cisco Call Manager
Express (CME). The architecture is highly scalable with the ability to connect up to 12 T1/E1s trunks, 52 foreignexchange-station (FXS) ports, or 36 foreign-exchange-office (FXO) ports.
Table 4.
IP Telephony Support-Features and Benefits
Feature
Benefit
IP Phone Support
Optional support for Cisco in-line power distribution to Ethernet switch network modules and HWICs
can be used to power Cisco IP phones.
EVM Module Slots
Extension Voice Module Slots, available only on the Cisco 2821 and Cisco 2851, provide support for
the Cisco High-Density Analog and Digital Extension Module for Voice and Fax, providing support for
up to 24 total voice and fax sessions without consuming a Network Module Slot.
PVDM (DSP) Slots on Motherboard
DSP (PVDM2) modules deliver support for analog and digital voice, conferencing, transcoding,
and secure Real-Time Transport Protocol (RTP) applications.
Integrated Call Processing
Cisco CME is an optional solution embedded in Cisco IOS Software that provides call processing for
Cisco IP phones. Cisco CME delivers telephony features similar to those that are commonly used by
business users to meet the requirements of the small to medium-sized offices.
Integrated Voice Mail
Support for up to a 250 mailboxes using the Cisco Unity® Express voice messaging system is
possible with the integration of an optional voice-mail AIM or network module.
Broad Range of Voice Interfaces
Interfaces for public switched telephone network (PSTN), private branch exchange (PBX), and key
system connections include FXS; FXO; analog direct inward dialing (DID); ear and mouth (E&M);
Centralized Automated Message Accounting (CAMA); ISDN Basic Rate Interface (BRI); and T1, E1,
and J1 with ISDN Primary Rate Interface (PRI); QSIG; E1 R2; and several additional channelassociated-signaling (CAS) signaling schemes.
Survivable Remote Site Telephony (SRST)
Branch offices can take advantage of centralized call control while cost-effectively providing local
branch backup using SRST redundancy for IP telephony.
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 14
Data Sheet
Wireless Support-Features and Benefits
The Cisco 2800 Series can provide a complete wireless solution for branch offices, small/medium sized businesses,
and Wi-Fi hotspots. Wireless services enable greater mobility for employees, partners, and customers, resulting in
increased productivity.
Table 5.
Wireless Support-Features and Benefits
Feature
Benefit
WLAN Connectivity
● The 802.11b/g or 802.11a/b/g HWIC access point interface card can be used to provide integrated
WLAN connectivity to mobile clients at sites requiring a single access point, resulting in mobility and
enhanced productivity for users.
● Dual RP-TNC connectors enable diversity and allow for optimum coverage through the use of
external antennas.
Wireless Infrastructure Services
● Telephony support for wired and WLAN IP phones is delivered by Cisco CallManager Express
(CCME) or by Survivable Remote Site Telephony (SRST) with Cisco CallManager. Cordless WLAN
IP phones allow users to be mobile and more productive.
● Integrated switch modules with Power over Ethernet (POE) enable support for Cisco Aironet access
points (for larger sites) as well as wired IP phones.
● Mobility for clients from WLAN to cellular networks is enabled by Mobile IP home agent support.
● IEEE 802.1x local authentication using LEAP provides enhanced reliability through survivable
authentication for WLAN clients during WAN failures.
● Customizable guest access is enabled with the service selection gateway features, along with the
Subscriber Edge Services Manager.
Land Mobile Radio Over IP
● LMR over IP support allows radio users (e.g., security personnel, maintenance personnel, police
officers, etc.) to communicate via IP with phone and PC users, delivering improved communications
and productivity.
Wi-Fi Hotspot Services
● The access zone router and service selection gateway services features can be used to deploy
secure public WLAN access services with an integrated HWIC-AP for small sites or with Cisco
Aironet access points for larger sites. Wi-Fi hotspot services can be offered for additional revenue
for public locations (e.g., restaurants, hotels, airports, etc.) or a value-added service for customer
satisfaction.
Cost of Ownership and Ease of Use-Features and Benefits
The Cisco 2800 Series continues the heritage of offering versatility, integration, and power to branch offices. The
Cisco 2800 Series offers many enhancements to help enable the support of multiple services in the branch office as
shown in the table below.
Table 6.
Cost of Ownership and Ease of Use-Feature and Benefits
Feature
Benefit
Integrated Channel Service Unit/Data
Service Unit (CSU/DSU), Add/Drop
Multiplexers, Firewall, Modem,
Compression, and Encryption
Consolidates typical communications equipment found in branch-office wiring closets into a single,
compact unit; this space-saving solution provides better manageability
Optional Network Analysis Module
Provides application-level visibility into network traffic for troubleshooting, performance monitoring,
capacity planning, and managing network-based services (Note: Cisco 2811, 2821, and 2851 only)
Cisco IOS IP Service Level Agreements (IP
SLAs)
With Cisco IOS IP SLAs, users can verify service guarantees, increase network reliability by
validating network performance, proactively identify network issues, and increase Return on
Investment (ROI) by easing the deployment of new IP services
Cisco IOS Software Warm Reboot
Reduces system boot time, and decreases downtime caused by Cisco IOS Software reboots (Cisco
2811, 2821 and 2851)
Enhanced Setup Feature
Optional setup wizard with context-sensitive questions guides the user through the router
configuration process, allowing faster deployment
CiscoWorks Support
Offers advanced management and configuration capabilities through a Web-based GUI
Cisco AutoInstall
Configures remote routers automatically across a WAN connection to save cost of sending technical
staff to the remote site
Cisco IOS Embedded Event Manager (EEM)
Enables automation of many network management tasks and directs the operation of Cisco IOS to
increase availability, collect information, and notify external systems or personnel about critical
events
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 8 of 14
Data Sheet
Summary and Conclusion
As companies strive to lower the cost of running their network and increase the productivity of their end users with
network applications, more intelligent branch-office solutions are required. The Cisco 2800 Series offers these
solutions by providing enhanced performance and increased modular density to support multiple services at wire
speed. The Cisco 2800 Series is designed to consolidate the functions of many separate devices into a single,
compact package that can be managed remotely. Because the Cisco 2800 Series routers are modular devices,
interface configurations are easily customized to accommodate a wide variety of network applications, such as
branch-office data access, integrated switching, voice and data integration, wireless LAN services, dial access
services, VPN access and firewall protection, business-class DSL, content networking, intrusion prevention, interVLAN routing, and serial device concentration. The Cisco 2800 Series provides customers with the industry's most
flexible, adaptable infrastructure to meet both today's and tomorrow's business requirements for maximum
investment protection.
Product Specifications
Table 7.
Chassis Specifications
Cisco 2800 Series
Cisco 2801
Cisco 2811
Cisco 2821
Cisco 2851
Product Architecture
DRAM
● Default: 128 MB
● Maximum: 384 MB
● Default: 256 MB
● Maximum: 768 MB
Compact Flash
● Default: 64 MB
● Maximum: 128MB
● Default: 64 MB
● Maximum: 256 MB
Fixed USB 1.1 Ports
1
Onboard LAN Ports
2-10/100
Onboard AIM (Internal) Slot
2
2
● 4 slots; 2 slots support
HWIC, WIC, VIC, or
VWIC type modules
● 1 slot supports WIC,
VIC, or VWIC type
modules
● 1 slot supports VIC or
VWIC type modules
Interface Card Slots
● Default: 256 MB
● Maximum: 1 GB
2-10/100/1000
4 slots, each slot can
support HWIC, WIC, VIC,
or VWIC type modules
Network-Module Slot
No
1 slot, supports NM and
NME type modules
Extension Voice
Module Slot
0
1
PVDM (DSP) Slots on
Motherboard
2
3
Integrated Hardware-Based
Encryption
Yes
VPN Hardware Acceleration
(on Motherboard)
DES, 3DES, AES 128, AES
192, and AES 256
Optional Integrated In-Line
Power (PoE)
Yes, requires AC-IP power
supply
Console Port
(up to 115.2 kbps)
1
Auxiliary Port
(up to 115.2 kbps)
1
Minimum Cisco IOS
Software Release
12.3(8)T
Rack Mounting
Yes, 19-inch
Yes, 19- and 23-in. options
Wall Mounting
No
Yes
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
1 slot, supports NM, NME
and NME-X type modules
No
1 slot, supports NM, NME,
NME-X, NMD and NME-XD
type modules
No
Page 9 of 14
Data Sheet
Cisco 2800 Series
Cisco 2801
Cisco 2811
Cisco 2821
Cisco 2851
Power Requirements
AC Input Voltage
100 to 240 VAC,
autoranging
AC Input Frequency
47-63 Hz
AC Input Current
2A (110V) 1A (230V)
AC Input Surge Current
50A maximum, one cycle
(-48V power included)
AC-IP Maximum In-Line
Power Distribution
120W
AC-IP Input Current
4A (110V) 2A (230V)
AC-IP Input Surge Current
50A maximum, one cycle
(-48V power included)
DC Input Voltage
No DC Power Option
available
● No DC Power Option
available
DC Input Current
Typical Power Dissipation
3A (110V) 2A (230V)
160W
240W
360W
8A (110V) 4A (230V)
24 to 60 VDC, autoranging
positive or negative
● 8A (24V)
● 3A (60V)
● 12A (24V)
● 5A (60V)
● Startup current 50A<10
ms
● Startup current
50A<10 ms
42W (143 BTU/hr)
32W (109 BTU/hr)
54W (184 BTU/hr)
58W (197 BTU/hr)
Power Dissipation-AC
without IP Phone Support
150W (511 BTU/hr)
170W (580 BTU/hr)
280W (955 BTU/hr)
280W (955 BTU/hr)
Power Dissipation-AC with
IP Phone Support-System
Only
150W (511 BTU/hr)
210W (717 BTU/hr)
310W (1058 BTU/hr)
370W (1262 BTU/hr)
Power Dissipation-AC
with IP Phone SupportIP Phones
180W (612 BTU/hr)
160W (546 BTU/hr)
240W (819 BTU/hr)
360W (1128 BTU/hr)
300W (1024 BTU/hr)
300W (1024 BTU/hr)
(No Modules)
Power Dissipation-DC
Not applicable
180W (614 BTU/hr)
RPS
No
External only, connector for
RPS provided by default
Recommended RPS Unit
No RPS option
Cisco RPS-2300
Redundant Power System
Environmental Specifications
Operating Temperature
32° to 104°F (0° to 40°C)
Non-Operating
Temperature
-4° to 149°F (-20° to 65°C)
Maximum Operating
Temperature at Altitude
● 40°C @ sea level
● 31°C @ 6,000 ft
(1800 m)
● 25°C @ 10,000 ft
(3000 m)
Note: Derate 1.5°C per
1000 ft
-40° to 158°F (-40° to
70°C)
● 40°C @ sea level
● 40°C @ 6,000 ft
(1800 m)
● 30°C @ 13,000 ft
(4000 m)
● 27.2°C @ 15,000 ft
(4600 m)
Note: Derate 1.4°C per
1,000 ft above 6,000 ft
Operating Humidity
Dimensions (H x W x D)
10 to 85% RH noncondensing
● 1.72 x 17.5 x 16.5 in.
● (43.7 x 445 x 419 mm)
Rack Height
1 rack unit (1RU)
Weight (Fully Configured)
13.7 lb (6.2 kg)
5 to 85%RH, noncondensing
● 1.75 x 17.25 x 16.4 in.
● (44.5 x 438.2 x 416.6
mm)
● 3.5 x 17.25 x 16.4 in.
● (88.9 x 438.2 x 416.6
mm)
2RU
14 lb (6.4 kg)
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
25 lb (11.4 kg)
Page 10 of 14
Data Sheet
Cisco 2800 Series
Noise Level (Min/Max)
Cisco 2801
● 39 dBA for normal
operating temperature
(<90°F/32.2°C)
● 53.5 dBA (@
maximum fan speed)
Cisco 2811
● 47 dBA for normal
operating temperature
(<90°F/32.2°C)
● 57 dBA (@ maximum
fan speed)
Cisco 2821
Cisco 2851
● 44 dBA for normal
operating temperature
(<90°F/32.2°C)
● 53 dBA (@ maximum
fan speed)
Regulatory Compliance
NEBS
Safety
No
Yes
Yes
● UL 60950
● CAN/CSA C22.2 No.
60950
● IEC 60950
● EN 60950-1
● AS/NZS 60950
Immunity
● EN300386
● EN55024/CISPR24
● EN50082-1
● EN61000-6-2
EMC
● FCC Part 15
● ICES-003 Class A
● EN55022 Class A
● CISPR22 Class A
● AS/NZS 3548 Class A
● VCCI Class A
● EN 300386
● EN61000-3-3
● EN61000-3-2
FIPS-2
TELCOM**
FIPS 140-2 Certification
for 2801, 2811, 2821,
2851
● For all four platforms,
Telecom compliance
standards depend
upon country and
interface type.
Interfaces comply with
FCC Part 68, CS-03,
JATE Technical
Conditions, European
Directive 99/5/EC and
relevant TBR's. For
specific information
see the datasheet for
the specific interface
card.
● Homologation
requirements vary by
country and interface
type. For specific
country information,
see the on-line
approvals data base:
http://tools.cisco.com/c
se/prdapp/jsp/external
search.do?action=exte
rnalsearch&page=EXT
ERNAL_SEARCH&mo
dule=EXTERNAL_SE
ARCH
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 11 of 14
Data Sheet
Supported Modules
The Cisco 2800 Series supports a wide range of modules that span industry-leading breadth of services at the
branch office. For a list of modules supported on the Cisco 2800 Series, please visit the Cisco 3800 relevant
interfaces and modules home page at:
http://www.cisco.com/en/US/products/ps5854/products_relevant_interfaces_and_modules.html
Availability
The Cisco 2800 Series has been orderable since September, 2004, with first customer shipments at the end of
September 2004.
Ordering Information
To place an order, visit the Cisco Ordering Home Page.
Table 8.
Ordering Information for Cisco 2800 Integrated Services Routers
Part Number
Product Name
CISCO2801
Integrated services router with AC power, 2FE, 4 Interface Card Slots, 2 PVDM slots, 2 AIMs, and Cisco IOS IP Base
Software
CISCO2801-AC-IP
Integrated services router with AC power including power over ethernet distribution capability, 2FE, 4 Interface Card
Slots, 2 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software
CISCO2811
Integrated services router with AC power, 2FE, 1 NME, 4 HWICs, 2 PVDM slots, 2 AIMs, and Cisco IOS IP Base
Software
CISCO2811-AC-IP
Integrated services router with AC power including power over ethernet distribution capability, 2FE, 1 NME, 4 HWICs, 2
PVDM slots, 2 AIMs, and Cisco IOS IP Base Software
CISCO2811-DC
Integrated services router with DC power, 2FE, 1 NME, 4 HWICs, 2 PVDM slots, 2 AIMs, and Cisco IOS IP Base
Software
CISCO2821
Integrated services router with AC power, 2GE, 1 NME-X, 1 EVM, 4 HWICs, 3 PVDM slots, 2 AIMs, and Cisco IOS IP
Base Software
CISCO2821-AC-IP
Integrated services router with AC power including power over ethernet distribution capability, 2GE, 1 NME-X, 1 EVM, 4
HWICs, 3 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software
CISCO2821-DC
Integrated services router with DC power, 2GE, 1 NME-X, 1 EVM, 4 HWICs, 3 PVDM slots, 2 AIMs, and Cisco IOS IP
Base Software
CISCO2851
Dual Gigabit Ethernet integrated services router with AC power, 2GE, 1 NME-XD, 1 EVM, 4 HWICs, 3 PVDM slots, 2
AIMs, and Cisco IOS IP Base Software
CISCO2851-AC-IP
Integrated services router with AC power including power over ethernet distribution capability, 2GE, 1 NME-XD, 1 EVM, 4
HWICs, 3 PVDM slots, 2 AIMs, and Cisco IOS IP Base Software
CISCO2851-DC
Integrated services router with DC power, 2GE, 1 NME-XD, 1 EVM, 4 HWICs, 3 PVDM slots, 2 AIMs, and Cisco IOS IP
Base Software
Also, check with your Cisco representative regarding security, xDSL, and voice bundles for the Cisco 2800 Series.
To download the software, visit the Cisco Software Center.
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 12 of 14
Data Sheet
Table 9.
Software Ordering Information
Part Number
Product Name
Supported Platform
S28IPB
Cisco 2800 IP Base
Cisco 2801
S28NIPBK9
Cisco 2800 IP Base K9
Cisco2801
S28IPV
Cisco 2800 IP Voice
Cisco 2801
S28NIPVK9
Cisco 2800 IP Voice K9
Cisco 2801
S28ASK9
Cisco 2800 Advanced Security K9
Cisco 2801
S28EB
Cisco 2800 Enterprise Base
Cisco 2801
S280EBK9
Cisco 2800 Enterprise Base K9
Cisco 2801
S28SPSK9
Cisco 2800 SP Services K9
Cisco 2801
S280ES
Cisco 2800 Enterprise Services without Crypto
Cisco 2801
S28ESK9
Cisco 2800 Enterprise Services K9
Cisco 2801
S28AISK9
Cisco 2800 Advanced IP Services K9
Cisco 2801
S28AESK9
Cisco 2800 Advanced Enterprise Services K9
Cisco 2801
S28NIPB
Cisco 2800 IP Base
Cisco 2811, 2821, 2851
S28NIPV
Cisco 2800 IP Voice
Cisco 2811, 2821, 2851
S28NIVS
Cisco 2800 Int Voice/Video: GK, IPIP GW, TDMIP GW
Cisco 2811, 2821, 2851
S28NAVSK9
Cisco 2800 Int Voice/Video: GK, IPIP. GW, TDMIP GW AES
Cisco 2811, 2821, 2851
S28NASK9
Cisco 2800 Advanced Security K9
Cisco 2811, 2821, 2851
S28NEB
Cisco 2800 Enterprise Base
Cisco 2811, 2821, 2851
S28NEBK9
Cisco 2800 Enterprise Base K9
Cisco 2811, 2821, 2851
S28NSPSK9
Cisco 2800 SP Services K9
Cisco 2811, 2821, 2851
S28NES
Cisco 2800 Enterprise Services
Cisco 2811, 2821, 2851
S28NESK9
Cisco 2800 Enterprise Services K9
Cisco 2811, 2821, 2851
S28NAISK9
Cisco 2800 Advanced IP Services K9
Cisco 2811, 2821, 2851
S28NAESK9
Cisco 2800 Advanced Enterprise Services K9
Cisco 2811, 2821, 2851
S28NSNAK9
Cisco 2800 Advanced Enterprise Services with SNA switching
software
Cisco 2811, 2821, 2851
Service and Support
Cisco offers a wide range of services programs to accelerate customer success. These innovative services
programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high
levels of customer satisfaction. Cisco services help you to protect your network investment, optimize network
operations, and prepare the network for new applications to extend network intelligence and the power of your
business. For more information about Cisco Services, see Cisco Technical Support Services or Cisco Advanced
Services.
For More Information
For more information about the Cisco 2800 Series, visit http://www.cisco.com/en/US/products/ps5854/index.html
or contact your local account representative.
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 13 of 14
Data Sheet
Printed in USA
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-335076-09
12/10
Page 14 of 14