Maintenance and Service
Guide
HP Compaq nx8220 and nc8230 Notebook PCs
HP Compaq nw8240 Mobile Workstation
Document Part Number: 372658-001
March 2005
This guide is a troubleshooting reference used for maintaining
and servicing the notebook. It provides comprehensive
information on identifying notebook features, components, and
spare parts; troubleshooting notebook problems; and performing
notebook disassembly procedures.
© Copyright 2005 Hewlett-Packard Development Company, L.P.
Microsoft and Windows are U.S. registered trademarks of Microsoft
Corporation. Intel and Pentium are trademarks or registered trademarks of
Intel Corporation or its subsidiaries in the United States and other
countries. Bluetooth is a trademark owned by its proprietor and used by
Hewlett-Packard Company under license. SD logo is a trademark of its
proprietor.
The information contained herein is subject to change without notice. The
only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing
herein should be construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions contained herein.
Maintenance and Service Guide
HP Compaq nx8220 and nc8230 Notebook PCs
HP Compaq nw8240 Mobile Workstation
First Edition March 2005
Document Part Number: 372658-001
Contents
1 Product Description
1.1
1.2
1.3
1.4
1.5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2
Resetting the Notebook . . . . . . . . . . . . . . . . . . . . . . . 1–5
Power Management. . . . . . . . . . . . . . . . . . . . . . . . . . 1–5
External Components . . . . . . . . . . . . . . . . . . . . . . . . 1–6
Design Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . 1–20
2 Troubleshooting
2.1 Computer Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–1
2.2 Troubleshooting Flowcharts . . . . . . . . . . . . . . . . . . . 2–7
3 Illustrated Parts Catalog
3.1
3.2
3.3
3.4
3.5
3.6
3.7
Serial Number Location . . . . . . . . . . . . . . . . . . . . . . 3–1
Notebook Major Components . . . . . . . . . . . . . . . . . . 3–2
Miscellaneous Plastics Kit . . . . . . . . . . . . . . . . . . . 3–14
Miscellaneous Cable Kit . . . . . . . . . . . . . . . . . . . . . 3–15
Mass Storage Devices . . . . . . . . . . . . . . . . . . . . . . . 3–16
Miscellaneous (Not Illustrated). . . . . . . . . . . . . . . . 3–17
Sequential Part Number Listing . . . . . . . . . . . . . . . 3–19
4 Removal and Replacement Preliminaries
4.1
4.2
4.3
4.4
4.5
4.6
4.7
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service Considerations . . . . . . . . . . . . . . . . . . . . . . .
Preventing Damage to Removable Drives . . . . . . . .
Preventing Electrostatic Damage . . . . . . . . . . . . . . .
Packaging and Transporting Precautions . . . . . . . . .
Workstation Precautions . . . . . . . . . . . . . . . . . . . . . .
Grounding Equipment and Methods . . . . . . . . . . . . .
Maintenance and Service Guide
4–1
4–2
4–3
4–4
4–5
4–6
4–7
iii
Contents
5 Removal and Replacement Procedures
5.1 Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–2
5.2 Disassembly Sequence Chart . . . . . . . . . . . . . . . . . . 5–3
5.3 Preparing the Notebook for Disassembly . . . . . . . . . 5–5
5.4 Hard Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–7
5.5 Notebook Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–10
5.6 MultiBay II Device . . . . . . . . . . . . . . . . . . . . . . . . . 5–11
5.7 External Memory Module . . . . . . . . . . . . . . . . . . . . 5–12
5.8 Bluetooth Board . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–15
5.9 Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–17
5.10 Switch Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–22
5.11 RTC Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–26
5.12 Thermal Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–27
5.13 Heat Sink. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–29
5.14 Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–32
5.15 TPM Security Card . . . . . . . . . . . . . . . . . . . . . . . . 5–34
5.16 Internal Memory Module . . . . . . . . . . . . . . . . . . . 5–35
5.17 TouchPad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–37
5.18 Mini PCI Communications Card. . . . . . . . . . . . . . 5–40
5.19 Display Assembly . . . . . . . . . . . . . . . . . . . . . . . . . 5–42
5.20 Top Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–46
5.21 Modem Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–50
5.22 System Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–52
5.23 System Board Frame . . . . . . . . . . . . . . . . . . . . . . . 5–59
5.24 Push Button Module . . . . . . . . . . . . . . . . . . . . . . . 5–63
5.25 Serial Connector Module . . . . . . . . . . . . . . . . . . . 5–65
5.26 Audio Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–67
6 Specifications
A Connector Pin Assignments
B Power Cord Set Requirements
C
Screw Listing
Index
iv
Maintenance and Service Guide
1
Product Description
The HP Compaq nx8220 and nc8230 Notebook PCs and
HP Compaq nw8240 Mobile Workstation offer advanced
modularity, Intel® Pentium® M processors, and extensive
multimedia support.
HP Compaq nx8220 and nc8230 Notebook PCs and
HP Compaq nw8240 Mobile Workstation
Maintenance and Service Guide
1–1
Product Description
1.1 Features
■
■
■
■
■
■
■
■
■
■
■
1–2
Intel Pentium M 2.13-, 2.00-, 1.86-, 1.73-, or 1.60-GHz
processors, varying by notebook model
The following displays are available, varying by
notebook model:
❏ 15.4-inch, UXGA, TFT (1600 × 1200) with over
16.8 million colors
❏ 15.4-inch, WSXGA, TFT (1680 × 1050) with over
16.8 million colors
❏ 15.4-inch, WXGA, TFT (1366 × 768) with over
16.8 million colors
80-, 60-, or 40-GB high-capacity hard drive, varying by
notebook model
256-MB DDR2 synchronous DRAM (SDRAM) at 400 and
533 MHz, expandable to 2.0 GB
Microsoft® Windows® XP Home Edition or Windows XP
Professional, varying by notebook model
Full-size Windows keyboard with embedded numeric keypad
TouchPad and pointing stick pointing devices, including a
dedicated vertical scroll region.
Integrated 10Base-T/100Base-TX Ethernet local area
network (LAN) network interface card (NIC) with RJ-45 jack
Integrated high-speed 56K modem with RJ-11 jack
Integrated wireless support for Mini PCI IEEE 802.11a/b and
802.11a/b/g WLAN device
Support for one Type I or Type II PC Card slot, with support
for both 32-bit (CardBus) and 16-bit PC Cards
Maintenance and Service Guide
Product Description
■
External 90-watt AC adapter with 3-wire power cord
■ 8-cell Li-Ion battery pack
■ Stereo speakers
■
Volume up, volume mute, and volume down buttons
(full-featured models only)
references are made throughout this Maintenance
✎ Numerous
and Service Guide to “full-featured” and “defeatured” units. A
notebook model is considered to be full-featured if it has
3 Universal Serial Bus ports and the following components:
■ Volume control buttons
■ Quick Launch buttons
■ Infrared port
■ SD Card slot
■ Serial port
■ S-Video-out port
■ Docking connector
A notebook model is considered to be defeatured if it has only
2 Universal Serial Bus ports and none of the components listed
above.
Maintenance and Service Guide
1–3
Product Description
■
Support for the following optical drives:
❏ DVD-ROM drive
❏ DVD+RW/R and CD-RW Combo Drive
❏ DVD/CD-RW Combo Drive
■
Connectors:
❏ Infrared (full-featured models only)
❏ Audio-out (headphone)
❏ Audio-in (microphone)
❏ Universal Serial Bus (USB) v. 2.0 (3 ports on full-featured
notebook models, 2 ports on defeatured notebook models)
❏ Serial port (full-featured models only)
❏ Power
❏ External monitor
❏ RJ-45 (network)
❏ RJ-11 (modem)
❏ S-Video-out (full-featured models only)
❏ IEEE 1394
❏ PC Card
❏ Smart card
❏ SD Card (full-featured models only)
❏ Parallel port (full-featured models only)
❏ Primary battery
❏ Travel battery
❏ Docking connector (full-featured models only)
1–4
Maintenance and Service Guide
Product Description
1.2 Resetting the Notebook
If the notebook you are servicing has an unknown password,
follow these steps to clear the password. These steps also
clear CMOS:
1. Prepare the notebook for disassembly (refer to Section 5.3,
“Preparing the Notebook for Disassembly,” for more
information).
2. Remove the real-time clock (RTC) battery (refer to
Section 5.11, “RTC Battery,” for more information on
removing and replacing the RTC battery).
3. Wait approximately 5 minutes.
4. Replace the RTC battery and reassemble the notebook.
5. Connect AC power to the notebook. Do not reinsert any
battery packs at this time.
6. Turn on the notebook.
All passwords and all CMOS settings have been cleared.
1.3 Power Management
The notebook comes with power management features that
extend battery operating time and conserve power. The
notebook supports the following power management features:
■
Standby
■
Hibernation
■
Setting customization by the user
■
Hotkeys for setting the level of performance
■
Battery calibration
■
Lid switch standby/resume
■
Power/standby button
■
Advanced Configuration and Power Management (ACPM)
compliance
Maintenance and Service Guide
1–5
Product Description
1.4 External Components
The external components on the front of the notebook are shown
below and described in Table 1-1.
Front Components
Table 1-1
Front Components
Item
Component
Function
1
Wireless light
On: an integrated wireless device (selected
models only) has been turned on.
2
Power/standby light
■ On: The notebook is on.
■ Blinking: The notebook is in
standby mode.
1–6
Maintenance and Service Guide
Product Description
Table 1-1
Front Components (Continued)
Item
Component
Function
3
Battery light
■ Amber: A battery pack is charging.
■ Green: A battery pack is close to full
charge capacity.
■ Blinking amber: A battery pack that is the
only available power source has reached
a low-battery condition. When the battery
reaches a critical low-battery condition,
the battery light blinks more quickly.
■ Off: If the notebook is connected to
external power, the light is turned off
when all batteries in the notebook are
fully charged. If the notebook is not
connected to external power, the light is
turned off until the battery reaches a
low-battery condition.
4
Integrated Drive
Electronics (IDE) drive
light
On: A drive in the hard drive bay or
MultiBay II is being accessed.
5
Infrared port
(full-featured models
only)
Provides wireless communication between
the notebook and an optional
IrDA-compliant device.
6
Display release latch
Opens the notebook.
Maintenance and Service Guide
1–7
Product Description
The external components on the right side of the notebook are
shown below and described in Table 1-2.
Right-Side Components
Table 1-2
Right-Side Components
Item
Component
Function
1
Audio-out
(headphone) jack
Produces system sound when connected to
optional powered stereo speakers,
headphones, headset, or television audio.
2
Internal microphone
Records sound.
3
Audio-in
(microphone) jack
Connects an optional monaural
microphone.
4
USB ports (2)
(full-featured models
only)
Connect USB 1.1- and 2.0-compliant
devices to the notebook using a standard
USB cable, or connects an optional
External MultiBay or External MultiBay II to
the notebook. The External MultiBay must
also be connected to an external power
source.
5
MultiBay II
Holds an optional MultiBay II device.
6
Serial port
(full-featured models
only)
Connects an optional serial device.
1–8
Maintenance and Service Guide
Product Description
The external components on the left side of the notebook are
shown below and described in Table 1-3.
Left-Side Components
Table 1-3
Left-Side Components
Item
Component
Function
1
Security cable slot
Attaches an optional security cable to the
notebook.
Ä
Security solutions are designed to
act as deterrents. These deterrents
may not prevent a product from being
mishandled or stolen.
2
RJ-45 (network) jack
Connects a network cable.
3
RJ-11 (modem) jack
Connects the modem cable.
4
S-Video-out jack
(full-featured models
only)
Is a 7-pin, dual-purpose jack.
It connects an optional S-Video device,
such as a television, VCR, camcorder,
overhead projector, or video capture card
with an optional, standard (4-pin) S-Video
cable.
The extra 3 pins also enable an optional
S-Video-to-composite adapter to be used
with the notebook.
Maintenance and Service Guide
1–9
Product Description
Table 1-3
Left-Side Components (Continued)
Item
Component
Function
5
Vent
Enables airflow to cool internal
components.
Ä
To prevent overheating, do not
obstruct vents. Do not allow a hard
surface, such as a printer, or a soft
surface, such as pillows or thick rugs
or clothing, to block airflow.
6
1394 port (4 pin)
Connects an optional 4-pin 1394 device,
such as a camcorder.
7
USB port
Connects USB 1.1- and 2.0-compliant
devices to the notebook using a standard
USB cable, or connects an optional
External MultiBay or External MultiBay II to
the notebook. The External MultiBay must
be connected to an external power source.
8
Smart card reader
Accepts smart cards.
9
SD Card slot
Accepts Secure Digital (SD) Memory
Cards.
10
PC Card slot
Supports optional Type I or Type II
PC Card.
11
PC Card eject button
Ejects PC Cards from the PC Card slot.
1–10
Maintenance and Service Guide
Product Description
The external components on the rear panel of the notebook are
shown below and described in Table 1-4.
Rear Panel Components
Table 1-4
Rear Panel Components
Item
Component
Function
1
Primary battery bay
Holds the primary battery pack.
2
Power connector
Connects an AC adapter or an optional
automobile or aircraft adapter.
3
External monitor port
Connects an optional external VGA
monitor or projector.
Maintenance and Service Guide
1–11
Product Description
The standard keyboard components of the notebook are shown
below and described in Table 1-5.
Standard Keyboard Components
1–12
Maintenance and Service Guide
Product Description
Table 1-5
Standard Keyboard Components
Item
Component
Function
1
Function keys
(f3, f4, f8–f11)
Execute frequently used system functions
when pressed in combination with the fn
key.
2
caps lock key
Enables caps lock and turns on the caps
lock light.
3
fn key
Executes frequently used system
functions when pressed in combination
with a function key or the esc key.
4
Windows logo key
Displays the Windows Start menu.
5
Windows
applications key
Displays a shortcut menu for items
beneath the pointer.
6
Arrow keys
Moves the cursor around the screen.
7
Keypad keys (15)
Can be used like the keys on an external
numeric keypad.
8
num lock key
Enables numeric lock, turns on the
embedded numeric keypad, and turns
on the num lock light.
Maintenance and Service Guide
1–13
Product Description
The notebook top components are shown below and described in
Table 1-6.
Top Components, Part 1
Table 1-6
Top Components, Part 1
Item
Component
Function
1
Display lid switch
Initiates standby if the display is closed
while the notebook is turned on.
2
Power/standby button
When the notebook is:
■ Off, press to turn on the notebook.
■ On, briefly press to initiate hibernation.
■ In standby, briefly press to resume from
standby.
■ In hibernation, briefly press to restore
from hibernation.
the system has stopped
✎ Ifresponding
and Microsoft Windows
shutdown procedures cannot be
used, press and hold the
power/standby button for at least
4 seconds to turn off the notebook.
1–14
Maintenance and Service Guide
Product Description
Table 1-6
Top Components, Part 1 (Continued)
Item
Component
Function
3
Info Center button
Enables you to view a list of commonly
used software solutions.
4
Wireless button
Enables and disables wireless LAN or
Bluetooth® devices (select models only).
On: A wireless LAN or Bluetooth device is
hardware enabled.
Wireless light
5
Presentation mode
button
Turns on Presentation mode.
6
Caps lock light
On: caps lock is on.
7
Num lock light
On: num lock or the numeric keypad is on.
8
Volume mute button
(full-featured models
only)
Turns off notebook sound.
9
Volume down button
(full-featured models
only)
Decreases system sound.
10
Volume up button
(full-featured models
only)
Increases system sound.
Maintenance and Service Guide
1–15
Product Description
The notebook top components are continued below and described
in Table 1-7.
Top Components, Part 2
1–16
Maintenance and Service Guide
Product Description
Table 1-7
Top Components, Part 2
Item
Component
Function
1
Pointing stick
(select models only)
Moves the pointer and selects or activates
items on the screen.
2
Speakers
Produce stereo sound.
3
Pointing stick buttons
(select models only)
Function like the buttons on an external
mouse.
4
TouchPad scroll zone
Scrolls up or down.
5
TouchPad buttons
Function like the buttons on an
external mouse.
6
TouchPad
Moves the pointer and selects or activates
items on the screen. Can be set to perform
other mouse functions, such as scrolling,
selecting, and double-clicking.
Maintenance and Service Guide
1–17
Product Description
The external components on the bottom of the notebook are
shown below and described in Table 1-8.
Bottom Components
Table 1-8
Bottom Components
Item
Component
Function
1
Primary battery bay
Holds the primary battery pack.
2
Primary battery locking
latch
Secures the primary battery pack into
the battery bay. This latch must be set
to unlock to release the battery.
1–18
Maintenance and Service Guide
Product Description
Table 1-8
Bottom Components (Continued)
Item
Component
Function
3
Travel battery connector
Connects an optional travel battery.
4
Memory module
compartment
Contains one memory module slot.
5
Hard drive bay
Holds the primary hard drive.
6
Vents (5)
Enable airflow to cool internal
components.
prevent overheating, do not
✎ To
obstruct vents. Do not allow a
hard surface, such as a printer, or
a soft surface, such as pillows
or thick rugs or clothing, to block
airflow.
7
Primary battery release
latch
Releases the primary battery pack from
the battery bay. The primary battery
locking latch must be in the unlocked
position.
8
Docking connector
(full-featured models only)
Connects the notebook to an optional
docking device.
Maintenance and Service Guide
1–19
Product Description
1.5 Design Overview
This section presents a design overview of key parts and features
of the notebook. Refer to Chapter 3, “Illustrated Parts Catalog,”
to identify replacement parts, and Chapter 5, “Removal and
Replacement Procedures,” for disassembly steps.
The system board provides the following device connections:
Ä
■
Audio
■
Display
■
Hard drive
■
Intel Pentium M processors
■
Keyboard
■
Memory module
■
Mini PCI communications devices
■
PC Card
■
Pointing stick
■
TouchPad
■
Trusted platform module (TPM) security module
CAUTION: To properly ventilate the notebook, allow at least a 7.6--cm
(3-inch) clearance on the left and right sides of the notebook.
The notebook uses an electric fan for ventilation. The fan is
controlled by a temperature sensor and is designed to be turned
on automatically when high temperature conditions exist. These
conditions are affected by high external temperatures, system
power consumption, power management/battery conservation
configurations, battery fast charging, and software applications.
Exhaust air is displaced through the ventilation grill located on
the left side of the notebook.
1–20
Maintenance and Service Guide
2
Troubleshooting
Å
WARNING: Only authorized technicians trained by HP should repair
this equipment. All troubleshooting and repair procedures are detailed
to allow only subassembly-/module-level repair. Because of the
complexity of the individual boards and subassemblies, do not attempt
to make repairs at the component level or modifications to any printed
wiring board. Improper repairs can create a safety hazard. Any
indication of component replacement or printed wiring board
modification may void any warranty or exchange allowances.
2.1 Computer Setup
Computer Setup is a preinstalled, ROM-based utility that can be
used even when the operating system is not working or will not
load. If the operating system is working, the notebook restarts the
operating system after you exit Computer Setup.
devices are not supported in Computer Setup; you
✎ Pointing
must use the keyboard to navigate and make selections.
The menu tables later in this chapter provide an overview of
Computer Setup options.
Maintenance and Service Guide
2–1
Troubleshooting
Accessing Computer Setup
The information and settings in Computer Setup are accessed
from the File, Security, Tools, and Advanced menus.
1. Open Computer Setup by turning on or restarting the
tablet PC. Press f10 while the F10 = Based Setup message is
displayed in the lower-left corner of the screen.
❏ To change the language, press f2.
❏ To view navigation information, press f1.
❏ To return to the Computer Setup menu, press esc.
2. Select the File, Security, Tools, or Advanced menu.
3. To exit Computer Setup, choose one of the following:
❏ To exit without saving any changes, use the arrow keys to
select File > Ignore changes and exit, and then follow
the instructions on the screen.
❏ To exit and save all the settings you have entered, use the
arrow keys to select File > Save changes and exit, and
then follow the instructions on the screen.
Your preferences are set when you exit Computer Setup and take
effect when the notebook restarts.
Restoring Computer Setup Defaults
To return all settings in Computer Setup to the values that were
set at the factory:
1. Open Computer Setup by turning on or restarting the
tablet PC. Press f10 while the F10 = Based Setup message is
displayed in the lower-left corner of the screen.
❏ To change the language, press f2.
❏ To view navigation information, press f1.
2. Use the arrow keys to select File > Restore defaults.
3. Select the Restore Defaults check box.
2–2
Maintenance and Service Guide
Troubleshooting
4. To confirm the restoration, press f10.
5. Select File > Save changes and exit, and then follow the
instructions on the screen.
When the computer restarts, the factory settings are restored, and
any identification information you have entered is saved.
Selecting from the File Menu
Table 2-1
File Menu
Select
To Do This
System Information
■ View identification information about the
tablet PC and any battery packs in the system.
■ View specification information about the
processor, memory and cache size, video
revision, keyboard controller version, and
system ROM.
Save to floppy
Save system configuration settings to a diskette.
Restore from floppy
Restore system configuration settings from a
diskette.
Restore defaults
Replace configuration settings in Computer Setup
with factory default settings. (Identification
information is retained.)
Ignore changes and exit
Cancel changes entered during the current
session. Then exit and restart the notebook.
Save changes and exit
Save changes entered during the current session.
Then exit and restart the notebook. The changes
you save are in effect when the notebook restarts.
Maintenance and Service Guide
2–3
Troubleshooting
Selecting from the Security Menu
Table 2-2
Security Menu
Select
To Do This
Administrator password
Enter, change, or delete an HP Administrator
password.
Power-on password
Enter, change, or delete a power-on password.
Password options
■ Enable/Disable stringent security.
■ Enable/Disable required password on restart.
DriveLock passwords
Enable/disable DriveLock; change a DriveLock
user or master password.
Settings are accessible only
✎ DriveLock
when you enter Computer Setup by turning
on (not restarting) the notebook.
Smart Card Security
Enable/disable power-on support for smart cards.
feature is supported by select smart
✎ This
card readers only.
Embedded Security
■ Enable/Disable the embedded security chip.
■ Restore embedded security chip to factory
settings.
■ Enable/Disable power-on authentication
support.
■ Enable/Disable automatic DriveLock.
■ Reset power-on authentication credential
Security settings are accessible
✎ Embedded
only if the notebook is equipped with an
embedded security chip.
Device security
Enable/Disable devices in the system.
Enable NIC for inclusion in MultiBoot.
System IDs
Enter user-defined identification values.
2–4
Maintenance and Service Guide
Troubleshooting
Selecting from the Tools Menu
Table 2-3
Tools Menu
Select
To Do This
HDD Self Test options
Run a quick or comprehensive self-test on any
hard drive in the system.
Battery Information
View information about any battery packs in the
notebook.
Memory Check
■ Run a self-test on memory modules in
the notebook.
■ View information about memory modules
installed in the notebook.
Maintenance and Service Guide
2–5
Troubleshooting
Selecting from the Advanced Menu
Table 2-4
Advanced Menu
Select
To Do This
Language (or press f2)
Change the Computer Setup language.
Boot options
■ Enable/Disable MultiBoot, which sets a startup
sequence that can include most bootable
devices and media in the system.
■ Set the boot order.
Device options
■ Swap the functions of the fn key and left ctrl
key.
■ Enable/Disable multiple pointing devices at
startup. (To set the notebook to support only a
single, usually nonstandard, pointing device at
startup, select Disable.)
■ Enable/Disable USB legacy support for a USB
keyboard, mouse, and hub. When USB legacy
support is enabled
❐ A USB keyboard, mouse, and hub work
even when a Windows operating system
is not loaded.
❐ The notebook starts from a bootable hard
drive, diskette drive diskette, or CD,
CD-RW, or DVD inserted into a drive
connected by a USB connector to the
notebook or to an optional docking
device.
■ Select a parallel port mode: EPP (Enhanced
Parallel Port), standard, bidirectional, or ECP
(Enhanced Capabilities Port).
■ Enable/Disable all settings in the SpeedStep
window. (When Disable is selected, the
tablet PC runs in Battery Optimized mode.)
2–6
Maintenance and Service Guide
Troubleshooting
2.2 Troubleshooting Flowcharts
Table 2-5
Troubleshooting Flowcharts Overview
Flowchart
Description
2.1
“Flowchart 2.1—Initial Troubleshooting”
2.2
“Flowchart 2.2—No Power, Part 1”
2.3
“Flowchart 2.3—No Power, Part 2”
2.4
“Flowchart 2.4—No Power, Part 3”
2.5
“Flowchart 2.5—No Power, Part 4”
2.6
“Flowchart 2.6—No Video, Part 1”
2.7
“Flowchart 2.7—No Video, Part 2”
2.8
“Flowchart 2.8—Nonfunctioning Docking Device (if applicable)”
2.9
“Flowchart 2.9—No Operating System (OS) Loading”
2.10
“Flowchart 2.10—No OS Loading, Hard Drive, Part 1”
2.11
“Flowchart 2.11—No OS Loading, Hard Drive, Part 2”
2.12
“Flowchart 2.12—No OS Loading, Hard Drive, Part 3”
2.13
“Flowchart 2.13—No OS Loading, Diskette Drive”
Maintenance and Service Guide
2–7
Troubleshooting
Table 2-5
Troubleshooting Flowcharts Overview (Continued)
Flowchart
Description
2.14
“Flowchart 2.14—No OS Loading, Optical Drive”
2.15
“Flowchart 2.15—No Audio, Part 1”
2.16
“Flowchart 2.16—No Audio, Part 2”
2.17
“Flowchart 2.17—Nonfunctioning Device”
2.18
“Flowchart 2.18—Nonfunctioning Keyboard”
2.19
“Flowchart 2.19—Nonfunctioning Pointing Device”
2.20
“Flowchart 2.20—No Network/Modem Connection”
2–8
Maintenance and Service Guide
Troubleshooting
Flowchart 2.1—Initial Troubleshooting
Begin
troubleshooting.
N
Go to
Is there
power?
“Flowchart
2.2—No Power,
Part 1.”
Y
N
Check
LED board,
speaker
connections.
Beeps,
LEDs, or error
messages?
N
Y
Go to
All drives
working?
N
Go to
Is there video?
(no boot)
Y
“Flowchart
2.6—No Video,
Part 1.”
N
Keyboard/
pointing
device
working?
Y
N
Go to
Is the OS
loading?
N
Go to
Is there
sound?
Y
“Flowchart
2.9—No Operating
System (OS)
Loading.”
Y
“Flowchart
2.15—No Audio,
Part 1.”
Y
Maintenance and Service Guide
“Flowchart 2.17—
Nonfunctioning
Device.”
Go to
“Flowchart
2.18—Nonfunction
ing Keyboard” or
“Flowchart
2.19—Nonfunction
ing Pointing
Device.”
N
Connecting
to network
or modem?
Y
Go to
“Flowchart
2.20—No
Network/Modem
Connection.”
End
2–9
Troubleshooting
Flowchart 2.2—No Power, Part 1
No power
(power LED
is off).
Remove from
docking device
(if applicable).
N
N
Power up
on battery
power?
Go to
Power up
on battery
power?
Reset
power.*
“Flowchart
2.3—No Power,
Part 2.”
Y
Y
N
N
Power up
on AC
power?
Power up
on AC power?
Reset
power.*
Go to
“Flowchart
2.4—No Power,
Part 3.”
Y
Y
Y
Power up in
docking
device?
Done
N
1. Reseat the power cables in the docking
device and at the AC outlet.
2. Ensure the AC power source is active.
3. Ensure that the power strip is working.
Y
Done
2–10
N
Power up
in docking
device?
*NOTES
1. On select models, there is a separate
reset button.
2. On select models, the notebook can be
reset using the standby switch and
either the lid switch or the main power
switch.
Go to
“Flowchart
2.8—Nonfunctioning
Docking Device (if
applicable).”
Maintenance and Service Guide
Troubleshooting
Flowchart 2.3—No Power, Part 2
Continued from
“Flowchart
2.2—No Power,
Part 1.”
Visually check for
debris in battery
socket and clean
if necessary.
Y
Power on?
Done
N
Check battery by
recharging it,
moving it to
another notebook,
or replacing it.
N
Replace
power supply
(if applicable).
Power on?
Y
N
Go to
Done
Power on?
“Flowchart
2.4—No Power,
Part 3.”
Y
Done
Maintenance and Service Guide
2–11
Troubleshooting
Flowchart 2.4—No Power, Part 3
Continued from
“Flowchart
2.3—No Power,
Part 2.”
Plug directly
into AC outlet.
Y
Power LED
on?
Done
N
Reseat AC adapter
in notebook and
at power source.
Y
Power on?
Done
N
External
N
Try different
outlet.
Power outlet
active?
Y
Internal or
external AC
adapter?
Replace external
AC adapter.
N
Internal
Go to
“Flowchart
2.5—No Power,
Part 4.”
Replace
power cord.
Power on?
Y
Y
Done
Power on?
Done
N
2–12
Maintenance and Service Guide
Troubleshooting
Flowchart 2.5—No Power, Part 4
Continued from
“Flowchart
2.4—No Power,
Part 3.”
Open
notebook.
Y
Loose or
damaged
parts?
N
Reseat loose
components and
boards and
replace damaged
items.
Close
notebook and
retest.
N
Power on?
Y
Done
Replace the following items (if applicable). Check
notebook operation after each replacement:
1. Internal DC-DC converter*
2. Internal AC adapter
3. Processor board*
4. System board*
*NOTE: Replace these items as a set to prevent
shorting out among components.
Maintenance and Service Guide
2–13
Troubleshooting
Flowchart 2.6—No Video, Part 1
No video.
Docking Device
Go to
Stand-alone
or docking
device?
*NOTE: To change from internal to
external display, use the hotkey
combination.
“Flowchart
2.7—No Video,
Part 2.”
Stand-alone
Internal or
external
display*?
Y
Adjust
brightness.
A
Adjust
brightness.
Press lid
switch to ensure
operation.
Y
Video OK?
Done
N
Internal
External
Video OK?
Y
Done
N
Video OK?
Done
N
Replace the following one at a time. Test after each replacement.
1. Cable between notebook and notebook display (if applicable)
2. Display
3. System board
Check for bent
pins on cable.
N
Video OK?
Y
Internal and
external
video OK?
Replace
system
board.
Y
Done
2–14
N
Try
another
display.
Done
Maintenance and Service Guide
Troubleshooting
Flowchart 2.7—No Video, Part 2
Continued from
“Flowchart
2.6—No Video,
Part 1.”
Remove
tablet PC from
docking device,
if connected.
Adjust
display
brightness.
Check brightness
of external
monitor.
N
Y
Go to “A” in
“Flowchart
2.6—No Video,
Part 1.”
Video OK?
Y
Video OK?
Done
N
Check that notebook is properly
seated in docking device,
for bent pins on cable,
and for monitor connection.
Try another
external
monitor.
Y
Video OK?
Y
Internal
and external
video OK?
Done
Done
N
N
Go to
Adjust external
monitor display.
Maintenance and Service Guide
“Flowchart
2.8—Nonfunctioning
Docking Device (if
applicable).”
2–15
Troubleshooting
Flowchart 2.8—Nonfunctioning Docking Device
(if applicable)
Nonfunctioning
docking device.
Reseat power
cord in docking
device and
power outlet.
Check voltage
setting on docking
device.
Reinstall
notebook into
docking device.
Y
Reset monitor
cable connector at
docking device.
Docking
device
operating?
N
Y
Docking
device
operating?
N
Done
Done
Test replacement
docking device with
new notebook.
Remove notebook,
replace docking
device.
2–16
Maintenance and Service Guide
Troubleshooting
Flowchart 2.9—No Operating System (OS)
Loading
No OS
loading.*
Reseat power
cord in docking
device and
power outlet.
No OS loading from hard drive,
go to “Flowchart 2.10—No OS Loading,
Hard Drive, Part 1.”
No OS loading from diskette drive,
go to “Flowchart 2.13—No OS Loading,
Diskette Drive.”
No OS loading from optical drive,
go to “Flowchart 2.14—No OS Loading,
Optical Drive.”
No OS loading from network,
go to “Flowchart 2.20—No Network/Modem
Connection.”
*NOTE: Before beginning troubleshooting, always
check cable connections, cable ends, and drives
for bent or damaged pins.
Maintenance and Service Guide
2–17
Troubleshooting
Flowchart 2.10—No OS Loading, Hard Drive,
Part 1
OS not
loading from
hard drive.
Y
Nonsystem
disk message?
N
Go to
“Flowchart
2.11—No OS
Loading,
Hard Drive, Part 2.”
Reseat
external
hard drive.
Y
OS loading?
Done
N
N
Boot
from
CD?
N
Y
Boot
from
diskette?
Check the Setup
utility for correct
booting order.
Go to
“Flowchart
2.13—No OS
Loading,
Diskette Drive.”
Y
Change boot
priority through
the Setup utility
and reboot.
N
Boot
from
hard drive?
N
Y
Boot
from
hard drive?
Done
Go to
“Flowchart 2.17—No
nfunctioning Device.”
Y
2–18
Maintenance and Service Guide
Troubleshooting
Flowchart 2.11—No OS Loading, Hard Drive,
Part 2
Continued from
“Flowchart
2.10—No OS
Loading,
Hard Drive, Part 1.”
Reseat
hard drive.
N
1. Replace
hard drive.
2. Replace
system board.
Disc or
diskette in
drive?
Y
Y
Hard drive
accessible?
Done
N
Remove disc or
diskette and
reboot.
Run FDISK.
Y
Boot
from
hard drive?
N
Done
N
Hard drive
partitioned?
Y
N
Y
N
Go to
“Flowchart
2.13—No OS
Loading,
Diskette Drive.”
Boot
from diskette
drive?
Create partition,
and then format
hard drive to
bootable
C:\ prompt.
Hard drive
formatted?
Format hard drive
and bring to
a bootable
C:\ prompt.
Notebook
booted?
Load OS using
Operating System disc
(if applicable).
Y
N
Y
Hard drive
accessible?
Y
Done
N
Go to
“Flowchart
2.12—No OS
Loading,
Hard Drive, Part 3.”
Maintenance and Service Guide
Go to
“Flowchart
2.12—No OS
Loading,
Hard Drive, Part 3.”
2–19
Troubleshooting
Flowchart 2.12—No OS Loading, Hard Drive,
Part 3
Continued from
“Flowchart
2.11—No OS
Loading,
Hard Drive, Part 2.”
N
System
files on hard
drive?
Install OS
and reboot.
Y
Y
Y
Virus
on
hard drive?
OS
loading from
hard drive?
Clean virus.
N
Done
N
Y
Run SCANDISK and
check for
bad sectors.
Diagnostics on
disc or diskette?
Replace
hard drive.
N
N
Can bad
sectors
be fixed?
Run diagnostics
and follow
recommendations.
Replace
hard drive.
Y
N
Boot from
hard drive?
Fix bad
sectors.
Replace
hard drive.
Y
Done
2–20
Maintenance and Service Guide
Troubleshooting
Flowchart 2.13—No OS Loading, Diskette Drive
Y
OS not loading
from
diskette drive.
Reseat
diskette drive.
OS
loading?
Done
N
Y
N
Bootable
diskette
in drive?
Nonsystem
disk message?
N
Y
N
Check diskette
for system files.
Try different
diskette.
Go to
Boot
from another
device?
“Flowchart 2.17—
Nonfunctioning
Device.”
Y
Y
N
Diskette
drive enabled
in the Setup
utility?
Enable drive
and cold boot
notebook.
Nonsystem
disk error?
N
Y
Replace the following
components
individually, retesting
after each
replacement:
■ Diskette drive
■ System board
Y
Y
N
Install bootable
diskette and
reboot notebook.
Is diskette
drive boot
order
correct?
Change boot
priority using
the Setup utility.
OS
loading?
Reset the notebook.
Refer to
Section 1.2,
“Resetting the
Notebook,” for
Done
N
instructions.
Go to
“Flowchart 2.17—Non
functioning Device.”
Maintenance and Service Guide
2–21
Troubleshooting
Flowchart 2.14—No OS Loading, Optical Drive
Y
No OS
loading from
CD-ROM or
DVD-ROM drive.
N
Install bootable
disc and
reboot
notebook.
Bootable
disc in
drive?
Disc
in drive?
Y
N
Install
bootable disc.
Try another
bootable disc.
Y
Boots from
CD or DVD?
Done
N
Y
Boots from
CD or DVD?
Reseat
drive.
Done
N
N
Booting
from another
device?
Go to
“Flowchart 2.17—No
nfunctioning Device.”
Y
Y
Booting
order
correct?
N
Reset the notebook.
Refer to
Section 1.2,
“Resetting the
Notebook,” for
Go to
“Flowchart 2.17—Non
functioning Device.”
instructions.
Correct boot
order using
the Setup utility.
2–22
Maintenance and Service Guide
Troubleshooting
Flowchart 2.15—No Audio, Part 1
Y
Turn up audio
internally or
externally.
No audio.
Audio?
Done
N
N
Y
Notebook in
docking device
(if applicable)?
Go to
Internal
audio?
Undock
N
“Flowchart
2.16—No Audio,
Part 2.”
Y
Replace the following docking device
components one at a time, as applicable.
Check audio status after each change.
1. Reseat docking device audio cable.
2. Replace audio cable.
3. Replace speaker.
4. Replace docking device audio board.
5. Replace backplane board.
6. Replace I/O board.
Go to
“Flowchart
2.16—No Audio,
Part 2.”
Y
Go to
“Flowchart 2.17—Non
functioning Device.”
Audio?
Done
N
Maintenance and Service Guide
2–23
Troubleshooting
Flowchart 2.16—No Audio, Part 2
Continued from
“Flowchart
2.15—No Audio,
Part 1.”
N
Audio
driver in OS
configured?
Reload
audio drivers.
Y
N
Correct
drivers for
application?
Load drivers and
set configuration
in OS.
Y
Connect to
external
speaker.
N
Audio?
Y
Replace audio
board and
speaker
connections
in notebook
(if applicable).
Y
Audio?
Done
N
Replace the following components
individually, retesting after each
replacement:
■ Internal speakers.
■ Audio board (if applicable).
2–24
Maintenance and Service Guide
Troubleshooting
Flowchart 2.17—Nonfunctioning Device
Nonfunctioning
device.
Reseat
device.
Unplug the nonfunctioning device from the notebook
and inspect cables and plugs for bent or broken pins
or other damage.
Y
Clear
CMOS.
Fix or
replace
broken item.
Any physical
device detected?
N
Reattach device.
Close notebook,
plug in power,
and reboot.
Go to
“Flowchart
2.9—No
Operating System
(OS) Loading.”
Replace hard drive.
N
Device
boots
properly?
N
Replace NIC.
If integrated NIC,
replace system
board.
Y
Device
boots
properly?
Y
Done
Maintenance and Service Guide
Replace diskette
drive.
Done
2–25
Troubleshooting
Flowchart 2.18—Nonfunctioning Keyboard
Keyboard
not operating
properly.
Connect notebook
to good external
keyboard.
N
External
device
works?
Replace
system
board.
Y
Reseat internal
keyboard
connector
(if applicable).
N
Keyboard
operating
properly?
Replace internal
keyboard or
cable.
Y
Y
Keyboard
operating
properly?
Done
Done
N
Replace
system
board.
2–26
Maintenance and Service Guide
Troubleshooting
Flowchart 2.19—Nonfunctioning Pointing
Device
Pointing device
not operating
properly.
Connect notebook
to good external
pointing device.
N
Replace
system
board.
External
device
works?
Y
Reseat internal
pointing device
connector
(if applicable).
N
Replace internal
pointing device
or cable.
Pointing device
operating
properly?
Y
Y
Pointing device
operating
properly?
Done
Done
N
Replace
system
board.
Maintenance and Service Guide
2–27
Troubleshooting
Flowchart 2.20—No Network/Modem
Connection
No network
or modem
connection.
N
Network
or modem jack
active?
Replace jack
or have jack
activated.
Y
Y
Connect
to nondigital
line.
Digital
line?
N
Y
N
NIC/modem
configured
in OS?
Network
or modem
connection
working?
Reload
drivers and
reconfigure.
Done
N
Y
Disconnect all
power from
the notebook
and open.
Replace
NIC/modem (if
applicable).
Reseat NIC/modem
(if applicable).
Network
or modem
connection
working?
Y
Done
N
Replace
system
board.
2–28
Maintenance and Service Guide
3
Illustrated Parts Catalog
This chapter provides an illustrated parts breakdown and a
reference for spare part numbers.
3.1 Serial Number Location
When ordering parts or requesting information, provide the
notebook serial number and model number located on the bottom
of the notebook.
Serial Number Location
Maintenance and Service Guide
3–1
Illustrated Parts Catalog
3.2 Notebook Major Components
Notebook Major Components
3–2
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Notebook Major Components
Spare Part
Number
Item
Description
1
Display assemblies (include wireless antenna boards and cables)
15.4-inch, WSXGA, TFT
15.4-inch, WXGA, TFT
15.4-inch, UXGA, TFT
2
382684-001
382682-001
382683-001
Switch covers (include LED board and LED board cable)
For use only with HP Compaq nw8240 and
nc8230 models
For use only with HP Compaq nx8220 models
3
382680-001
384133-001
Keyboards, with pointing stick
Belgium
Brazil
Czech Republic
Denmark
France
French Canada
Germany
Greece
Hungary
Iceland
International
Israel
Italy
Japan
Korea
378203-181
378203-201
378203-221
378203-081
378203-051
378203-121
378203-041
378203-151
378203-211
378203-DD1
378203-002
378203-BB1
378203-061
378203-291
378203-AD1
Maintenance and Service Guide
Latin America
Norway
Portugal
Russia
Saudi Arabia
Slovakia
Slovenia
Spain
Sweden
Switzerland
Taiwan
Thailand
Turkey
United Kingdom
United States
378203-161
378203-091
378203-131
378203-251
378203-171
378203-231
378203-BA1
378203-071
378203-101
378203-111
378203-AB1
378203-281
378203-141
378203-031
378203-001
3–3
Illustrated Parts Catalog
Notebook Major Components
3–4
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Notebook Major Components (Continued)
Spare Part
Number
Item
Description
3
Keyboards, without pointing stick
Belgium
Brazil
Czech Republic
Denmark
France
French Canada
Germany
Greece
Hungary
Iceland
International
Israel
Italy
Japan
Korea
4
385548-181
385548-201
385548-221
385548-081
385548-051
385548-121
385548-041
385548-151
385548-211
385548-DD1
385548-002
385548-BB1
385548-061
385548-291
385548-AD1
Latin America
Norway
Portugal
Russia
Saudi Arabia
Slovakia
Slovenia
Spain
Sweden
Switzerland
Taiwan
Thailand
Turkey
United Kingdom
United States
385548-161
385548-091
385548-131
385548-251
385548-171
385548-231
385548-BA1
385548-071
385548-101
385548-111
385548-AB1
385548-281
385548-141
385548-031
385548-001
TouchPads (include TouchPad cable)
With TouchPad buttons and pointing stick buttons
With TouchPad buttons
382675-001
382676-001
5
Thermal plate (includes fan and thermal paste)
382674-001
6
Heat sink (includes thermal paste)
379799-001
7
Processors (include thermal paste)
Intel Pentium M 770 (2.13-GHz)
Intel Pentium M 760 (2.00-GHz)
Intel Pentium M 750 (1.86-GHz)
Intel Pentium M 740 (1.73-GHz)
Intel Pentium M 730 (1.60-GHz)
Maintenance and Service Guide
378224-001
378223-001
378222-001
378221-001
378220-001
3–5
Illustrated Parts Catalog
Notebook Major Components
3–6
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Notebook Major Components (Continued)
Item
Description
8
Mini PCI communications cards
Spare Part
Number
802.11b/g Mini PCI modem, for use in most of
the world
802.11b/g Mini PCI modem, for use in the rest of
the world
381582-001
802.11b/g combination wireless local access network
(WLAN) card, for use internationally
802.11b/g combination WLAN card, for use in Japan
802.11b/g combination WLAN card, for use in
the United States
373032-002
802.11a/b/g combination WLAN communications
card, for use internationally
802.11a/b/g combination WLAN communications
card, for use in Japan
802.11a/b/g combination WLAN communications
card, for use in the United States
373033-002
802.11a/b/g Mini PCI WLAN communications card,
for use in Europe, the Middle East, and Africa
802.11a/b/g Mini PCI WLAN communications card,
for use in Japan
802.11a/b/g Mini PCI WLAN communications card,
for use in most of the world
802.11a/b/g Mini PCI WLAN communications card,
for use in the rest of the world
373900-021
Maintenance and Service Guide
381583-001
373032-291
373032-001
373033-291
373033-001
373900-291
373900-001
373901-001
3–7
Illustrated Parts Catalog
Notebook Major Components
3–8
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Notebook Major Components (Continued)
Item
9a
9b
9c
9d
9e
Description
Spare Part
Number
Miscellaneous Plastics Kit
382691-001
Includes:
RTC battery
PC Card slot space savers (2)
Bluetooth cover (includes 1 captive screw)
Memory module compartment cover (includes 1 captive screw)
Hard drive cover (includes 2 captive screws)
Not illustrated:
Notebook feet
10
TPM security card
11
Top covers (include speakers)
For use only with HP Compaq nw8240 models
For use only with HP Compaq nc8230 and
nx8220 models
12
13
379807-001
382679-001
382678-001
Memory modules
DDR2, PC2-4200, CL3, 533 MHz
1024 MB
512 MB
256 MB
373121-001
373120-001
373119-001
DDR2, PC2-3200, CL3, 400 MHz
1024 MB
512 MB
256 MB
391021-001
391020-001
391019-001
Modem board (high-speed 56K)
325521-001
Maintenance and Service Guide
3–9
Illustrated Parts Catalog
Notebook Major Components
3–10
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Notebook Major Components (Continued)
Item
Description
14
System boards
Spare Part
Number
With 128-MB video memory, for use only with
HP Compaq nw8240 models
With 128-MB video memory, for use only with
HP Compaq nc8320 and nx8220 models
With 64-MB video memory, for use only with
HP Compaq nc8230 and nx8220 models
382686-001
15
System board frame (includes RJ-11 connector
module and cable)
382689-001
16
Serial connector module (includes serial connector
module cable)
382690-001
17
Broadcomm Bluetooth wireless board (includes
Bluetooth board cable)
367871-001
18
Base enclosures
For use only with HP Compaq nw8240 models
For use only with HP Compaq and nc8230 and
nx8220 models
Maintenance and Service Guide
382687-001
382688-001
384132-001
382681-001
3–11
Illustrated Parts Catalog
Notebook Major Components
3–12
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Notebook Major Components (Continued)
Item
Description
19
Battery packs
Spare Part
Number
8-cell, 4.8-AHr
8-cell, travel battery
372771-001
367456-001
20
Push button module
382693-001
21
MultiBay II devices
8X Max DVD-ROM drive
DVD+RW/R and CD-RW Combo Drive
DVD/CD-RW Combo Drive
22
Hard drives (include frame and connector)
7200-rpm
60-GB
23
373314-001
375557-001
373315-001
380950-001
5400-rpm
80-GB
60-GB
40-GB
Audio board (includes audio board cable and
USB board cable)
Maintenance and Service Guide
379810-001
379809-001
379808-001
382677-001
3–13
Illustrated Parts Catalog
3.3 Miscellaneous Plastics Kit
Table 3-2
Spare Part Number 382691-001
Item
Description
1
Hard drive cover (includes 2 captive screws)
2
Bluetooth cover (includes 1 captive screw)
3
Memory module compartment cover (includes 1 captive screw)
4
PC Card slot space saver
5
Notebook feet (4)
6
RTC battery
3–14
Maintenance and Service Guide
Illustrated Parts Catalog
3.4 Miscellaneous Cable Kit
Table 3-3
Spare Part Number 389014-001
Item
Description
1
LED board cable
2
Bluetooth cable
3
TouchPad cable
4
RJ-11 connector module and cable
5
Serial connector board cable
6
Audio board cable
7
USB board cable
Maintenance and Service Guide
3–15
Illustrated Parts Catalog
3.5 Mass Storage Devices
Table 3-4
Spare Part Number Information
Spare Part
Number
Item
Description
1
Hard drives (include frame and connector)
7200-rpm
60-GB
2
380950-001
5400-rpm
80-GB
60-GB
40-GB
Optical drives (include bezel)
8X Max DVD-ROM drive
DVD+RW/R and CD-RW Combo Drive
DVD/CD-RW Combo Drive
3–16
379810-001
379809-001
379808-001
373314-001
375557-001
373315-001
Maintenance and Service Guide
Illustrated Parts Catalog
3.6 Miscellaneous (Not Illustrated)
Table 3-5
Spare Part Information
Description
Spare Part
Number
Adjustable notebook stand
372420-001
Advanced Docking Station
374804-001
Docking Station
374803-001
Docking Station Miscellaneous Plastics Kit
380045-001
Carrying cases
Nylon top load
Nylon entry level
USB 1.1 diskette drive
Maintenance and Service Guide
325815-001
and
325815-002
325814-001
359118-001
3–17
Illustrated Parts Catalog
Table 3-5
Spare Part Information (Continued)
Description
Spare Part
Number
Power supply, 90 watt, slim line profile
374791-001
Power cords
For use in:
Australia and New Zealand
246959-011
Belgium, Europe, Finland, France, Germany, Greece,
the Netherlands, Norway, Portugal, Spain, and Sweden
246959-021
Brazil
246959-201
Canada, French Canada, Latin America, Taiwan, Thailand,
and the United States
246959-001
Denmark
246959-081
Hong Kong and the United Kingdom
246959-031
Israel
246959-BB1
Italy
246959-061
Japan
246959-291
Korea
246959-AD1
Sweden
246959-AG1
3–18
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-5
Spare Part Information (Continued)
Spare Part
Number
Description
Screw Kit (includes the following screws; refer to
Appendix C, “Screw Listing,” for more information on
specifications and usage)
■
■
■
■
Hex socket HM5.0×12.0 screw lock
Phillips PM3.0×5.0 screw
Phillips PM3.0×4.0 screw
Phillips PM2.5×13.0 spring-loaded
screw
■ Phillips PM2.0×10.0 spring-loaded
screw
■ Phillips PM2.0×8.0 shoulder screw
■ Phillips PM2.0×6.0 screw
■
■
■
■
■
■
■
■
382692-001
Phillips PM2.0×5.0 screw
Phillips PM2.0×4.0 screw
Phillips PM2.0×2.0 screw
Phillips PM1.5×4.0 screw
Phillips PM1.5×3.0 screw
Torx 8 M2.0×9.5 screw
Torx 8 M2.0×6.0 screw
Torx 8 M2.0×4.0 screw
3.7 Sequential Part Number Listing
Table 3-6
Sequential Part Number Listing
Spare Part
Number
Description
246959-001
Power cord for use in Canada, French Canada, Latin America,
Taiwan, Thailand, and the United States
246959-011
Power cord for use in Australia and New Zealand
246959-021
Power cord for use in Belgium, Europe, Finland, France,
Germany, Greece, the Netherlands, Norway, Portugal, Spain,
and Sweden
246959-031
Power cord for use in Hong Kong and the United Kingdom
Maintenance and Service Guide
3–19
Illustrated Parts Catalog
Table 3-6
Sequential Part Number Listing (Continued)
Spare Part
Number
Description
246959-061
Power cord for use in Italy
246959-081
Power cord for use in Denmark
246959-201
Power cord for use in Brazil
246959-291
Power cord for use in Japan
246959-AD1
Power cord for use in Korea
246959-AG1
Power cord for use in Sweden
246959-BB1
Power cord for use in Israel
325521-001
Modem board (high-speed 56K)
325814-001
Nylon entry level carrying case
325815-001
Nylon top load carrying case
325815-002
Nylon top load carrying case
359118-001
USB 1.1 diskette drive
367456-001
8-cell travel battery pack
367871-001
Broadcomm Bluetooth wireless board, includes cable
372420-001
Adjustable notebook stand
372771-001
8-cell, 4.8-AHr battery pack
373032-001
802.11b/g combination WLAN Mini PCI communications card
for use in the United States
373032-002
802.11b/g combination WLAN Mini PCI communications card
for use internationally
373032-291
802.11b/g combination WLAN Mini PCI communications card
for use in Japan
373033-001
802.11a/b/g combination WLAN card Mini PCI
communications card for use in the United States
3–20
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-6
Sequential Part Number Listing (Continued)
Spare Part
Number
Description
373033-002
802.11a/b/g combination WLAN Mini PCI communications
card for use internationally
373033-291
802.11a/b/g combination WLAN Mini PCI communications
card for use in Japan
373119-001
256-MB memory module (DDR2, PC2-4200, CL3, 533 MHz)
373120-001
512-MB memory module (DDR2, PC2-4200, CL3, 533 MHz)
373121-001
1024-MB memory module (DDR2, PC2-4200, CL3, 533 MHz)
373314-001
8X DVD-ROM drive
373315-001
24X DVD/CD-RW Combo Drive
373900-001
802.11a/b/g combination WLAN card Mini PCI
communications card for use in most of the world
373900-021
802.11a/b/g combination WLAN Mini PCI communications
card for use in Europe, Middle East, and Africa
373900-291
802.11a/b/g combination WLAN Mini PCI communications
card for use in Japan
373901-001
802.11a/b/g High Band combination WLAN Mini PCI
communications card
374791-001
90 watt, slim line profile power supply
374803-001
Docking Station
374804-001
Advanced Docking Station
375557-001
DVD+RW/R and CD-RW Combo Drive
378203-001
Keyboard, with pointing stick for use in the United States
378203-002
Keyboard, with pointing stick for use internationally
378203-031
Keyboard, with pointing stick for use in the United Kingdom
378203-041
Keyboard, with pointing stick for use in Germany
Maintenance and Service Guide
3–21
Illustrated Parts Catalog
Table 3-6
Sequential Part Number Listing (Continued)
Spare Part
Number
Description
378203-051
Keyboard, with pointing stick for use in France
378203-061
Keyboard, with pointing stick for use in Italy
378203-071
Keyboard, with pointing stick for use in Spain
378203-081
Keyboard, with pointing stick for use in Denmark
378203-091
Keyboard, with pointing stick for use in Norway
378203-101
Keyboard, with pointing stick for use in Sweden
378203-111
Keyboard, with pointing stick for use in Switzerland
378203-121
Keyboard, with pointing stick for use in French Canada
378203-131
Keyboard, with pointing stick for use in Portugal
378203-141
Keyboard, with pointing stick for use in Turkey
378203-151
Keyboard, with pointing stick for use in Greece
378203-161
Keyboard, with pointing stick for use in Latin America
378203-171
Keyboard, with pointing stick for use in Saudi Arabia
378203-181
Keyboard, with pointing stick for use in Belgium
378203-201
Keyboard, with pointing stick for use in Brazil
378203-211
Keyboard, with pointing stick for use in Hungary
378203-221
Keyboard, with pointing stick for use in Czech Republic
378203-231
Keyboard, with pointing stick for use in Slovakia
378203-251
Keyboard, with pointing stick for use in Russia
378203-281
Keyboard, with pointing stick for use in Thailand
378203-291
Keyboard, with pointing stick for use in Japan
378203-AB1
Keyboard, with pointing stick for use in Taiwan
3–22
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-6
Sequential Part Number Listing (Continued)
Spare Part
Number
Description
378203-AD1
Keyboard, with pointing stick for use in Korea
378203-BA1
Keyboard, with pointing stick for use in Slovenia
378203-BB1
Keyboard, with pointing stick for use in Israel
378203-DD1
Keyboard, with pointing stick for use in Iceland
378220-001
Intel Pentium M 1.60-GHz processor, includes thermal paste
378221-001
Intel Pentium M 1.73-GHz processor, includes thermal paste
378222-001
Intel Pentium M 1.86-GHz processor, includes thermal paste
378223-001
Intel Pentium M 2.00-GHz processor, includes thermal paste
378224-001
Intel Pentium M 2.13-GHz processor, includes thermal paste
379799-001
Heat sink (includes thermal paste)
379807-001
Trusted Platform Module (TPM) security card
379808-001
5400-rpm, 40-GB hard drive (includes frame and connector)
379809-001
5400-rpm, 60-GB hard drive (includes frame and connector)
379810-001
5400-rpm, 80-GB hard drive (includes frame and connector)
380045-001
Docking Station Miscellaneous Plastics Kit
380950-001
7200-rpm, 60-GB hard drive (includes frame and connector)
381582-001
802.11b/g WLAN Mini PCI communications card for use in
most of the world
381583-001
802.11b/g WLAN Mini PCI communications card for use in the
rest of the world
382674-001
Thermal plate (includes fan and thermal paste)
382675-001
TouchPad with TouchPad buttons and pointing stick buttons
(includes TouchPad cable)
382676-001
TouchPad with TouchPad buttons (includes TouchPad cable)
Maintenance and Service Guide
3–23
Illustrated Parts Catalog
Table 3-6
Sequential Part Number Listing (Continued)
Spare Part
Number
Description
382677-001
Audio board (includes audio board cable and USB board
cable)
382678-001
Top cover for use only with HP Compaq nc8230 and
nc8220 models (includes speakers)
382679-001
Top cover for use only with HP Compaq nw8240 models
(includes speakers)
382680-001
Switch cover for use only with HP Compaq nw8240 and
nc8230 models (include LED board and LED board cable)
382681-001
Base enclosure for use only with HP Compaq and nc8230 and
nc8220 models
382682-001
Display assembly, 15.4-inch, WXGA, TFT (includes wireless
antenna boards and cables)
382683-001
Display assembly, 15.4-inch, UXGA, TFT (includes wireless
antenna boards and cables)
382684-001
Display assembly, 15.4-inch, WSXGA, TFT (includes wireless
antenna boards and cables)
382686-001
System board with 128-MB video memory, for use only with
HP Compaq nw8240 models
382687-001
System board with 128-MB video memory, for use only with
HP Compaq nc8230 and nc8220 models
382688-001
System board with 64-MB video memory, for use only with
HP Compaq nc8230 and nc8220 models
382689-001
System board frame (includes RJ-11 connector module and
cable)
382690-001
Serial connector module (includes serial connector
module cable)
382691-001
Miscellaneous Plastics Kit
3–24
Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-6
Sequential Part Number Listing (Continued)
Spare Part
Number
Description
382692-001
Miscellaneous Screw Kit
382693-001
Push button module
384132-001
Base enclosure for use only with HP Compaq nw8240 models
384133-001
Switch cover for use only with HP Compaq nc8220 models
(include LED board and LED board cable)
385548-001
Keyboard, without pointing stick for use in the United States
385548-002
Keyboard, without pointing stick for use internationally
385548-031
Keyboard, without pointing stick for use in the United Kingdom
385548-041
Keyboard, without pointing stick for use in Germany
385548-051
Keyboard, without pointing stick for use in France
385548-061
Keyboard, without pointing stick for use in Italy
385548-071
Keyboard, without pointing stick for use in Spain
385548-081
Keyboard, without pointing stick for use in Denmark
385548-091
Keyboard, without pointing stick for use in Norway
385548-101
Keyboard, without pointing stick for use in Sweden
385548-111
Keyboard, without pointing stick for use in Switzerland
385548-121
Keyboard, without pointing stick for use in French Canada
385548-131
Keyboard, without pointing stick for use in Portugal
385548-141
Keyboard, without pointing stick for use in Turkey
385548-151
Keyboard, without pointing stick for use in Greece
385548-161
Keyboard, without pointing stick for use in Latin America
385548-171
Keyboard, without pointing stick for use in Saudi Arabia
385548-181
Keyboard, without pointing stick for use in Belgium
Maintenance and Service Guide
3–25
Illustrated Parts Catalog
Table 3-6
Sequential Part Number Listing (Continued)
Spare Part
Number
Description
385548-201
Keyboard, without pointing stick for use in Brazil
385548-211
Keyboard, without pointing stick for use in Hungary
385548-221
Keyboard, without pointing stick for use in Czech Republic
385548-231
Keyboard, without pointing stick for use in Slovakia
385548-251
Keyboard, without pointing stick for use in Russia
385548-281
Keyboard, without pointing stick for use in Thailand
385548-291
Keyboard, without pointing stick for use in Japan
385548-AB1
Keyboard, without pointing stick for use in Taiwan
385548-AD1
Keyboard, without pointing stick for use in Korea
385548-BA1
Keyboard, without pointing stick for use in Slovenia
385548-BB1
Keyboard, without pointing stick for use in Israel
385548-DD1
Keyboard, without pointing stick for use in Iceland
389014-001
Miscellaneous Cable Kit
390121-001
1024-MB memory module (DDR2, PC2-3200, CL3, 400 MHz)
390120-001
512-MB memory module (DDR2, PC2-3200, CL3, 400 MHz)
390119-001
256-MB memory module (DDR2, PC2-3200, CL3, 400 MHz)
3–26
Maintenance and Service Guide
4
Removal and Replacement
Preliminaries
This chapter provides essential information for proper and
safe removal and replacement service.
4.1 Tools Required
You will need the following tools to complete the removal and
replacement procedures:
■ Magnetic screwdriver
■ Phillips P0 screwdriver
■ Torx T8 screwdriver
■ 5.0-mm socket for system board locks
■ Flat-bladed screwdriver
■ Tool kit—includes connector removal tool, loopback plugs,
and case utility tool
Maintenance and Service Guide
4–1
Removal and Replacement Preliminaries
4.2 Service Considerations
The following sections include some of the considerations
that you should keep in mind during disassembly and assembly
procedures.
you remove each subassembly from the notebook, place
✎ As
the subassembly (and all accompanying screws) away from
the work area to prevent damage.
Plastic Parts
Using excessive force during disassembly and reassembly can
damage plastic parts. Use care when handling the plastic parts.
Apply pressure only at the points designated in the maintenance
instructions.
Cables and Connectors
Ä
CAUTION: When servicing the notebook, ensure that cables are
placed in their proper locations during the reassembly process.
Improper cable placement can damage the notebook.
Cables must be handled with extreme care to avoid damage.
Apply only the tension required to unseat or seat the cables
during removal and insertion. Handle cables by the connector
whenever possible. In all cases, avoid bending, twisting, or
tearing cables. Ensure that cables are routed in such a way that
they cannot be caught or snagged by parts being removed or
replaced. Handle flex cables with extreme care; these cables
tear easily.
4–2
Maintenance and Service Guide
Removal and Replacement Preliminaries
4.3 Preventing Damage to
Removable Drives
Removable drives are fragile components that must be handled
with care. To prevent damage to the notebook, damage to a
removable drive, or loss of information, observe the following
precautions:
■ Before removing or inserting a hard drive, shut down the
notebook. If you are unsure whether the notebook is off or
in hibernation, turn the notebook on, and then shut it down
through the operating system.
■ Before removing a diskette drive or optical drive, ensure that
a diskette or disc is not in the drive and ensure that the optical
drive tray is closed.
■ Before handling a drive, ensure that you are discharged of
static electricity. While handling a drive, avoid touching the
connector.
■ Handle drives on surfaces covered with at least one inch
of shock-proof foam.
■ Avoid dropping drives from any height onto any surface.
■ After removing a hard drive, an optical drive, or a diskette
drive, place it in a static-proof bag.
■ Avoid exposing a hard drive to products that have magnetic
fields, such as monitors or speakers.
■ Avoid exposing a drive to temperature extremes or liquids.
■ If a drive must be mailed, place the drive in a bubble pack
mailer or other suitable form of protective packaging and label
the package “FRAGILE: Handle With Care.”
Maintenance and Service Guide
4–3
Removal and Replacement Preliminaries
4.4 Preventing Electrostatic Damage
Many electronic components are sensitive to electrostatic
discharge (ESD). Circuitry design and structure determine the
degree of sensitivity. Networks built into many integrated circuits
provide some protection, but in many cases, the discharge
contains enough power to alter device parameters or melt
silicon junctions.
A sudden discharge of static electricity from a finger or other
conductor can destroy static-sensitive devices or microcircuitry.
Often the spark is neither felt nor heard, but damage occurs.
An electronic device exposed to electrostatic discharge may not
be affected at all and can work perfectly throughout a normal
cycle. Or the device may function normally for a while, then
degrade in the internal layers, reducing its life expectancy.
4–4
Maintenance and Service Guide
Removal and Replacement Preliminaries
4.5 Packaging and Transporting
Precautions
Use the following grounding precautions when packaging and
transporting equipment:
■ To avoid hand contact, transport products in static-safe
containers, such as tubes, bags, or boxes.
■ Protect all electrostatic-sensitive parts and assemblies with
conductive or approved containers or packaging.
■ Keep electrostatic-sensitive parts in their containers until
the parts arrive at static-free workstations.
■ Place items on a grounded surface before removing items
from their containers.
■ Always be properly grounded when touching a sensitive
component or assembly.
■ Store reusable electrostatic-sensitive parts from assemblies
in protective packaging or nonconductive foam.
■ Use transporters and conveyors made of antistatic belts and
roller bushings. Ensure that mechanized equipment used for
moving materials is wired to ground and that proper materials
are selected to avoid static charging. When grounding is not
possible, use an ionizer to dissipate electric charges.
Maintenance and Service Guide
4–5
Removal and Replacement Preliminaries
4.6 Workstation Precautions
Use the following grounding precautions at workstations:
■ Cover the workstation with approved static-shielding material
(refer to Table 4-2, “Static-Shielding Materials”).
■ Use a wrist strap connected to a properly grounded work
surface and use properly grounded tools and equipment.
■ Use conductive field service tools such as cutters,
screwdrivers, and vacuums.
■ When fixtures must directly contact dissipative surfaces, use
fixtures made only of static-safe materials.
■ Keep the work area free of nonconductive materials such
as ordinary plastic assembly aids and Styrofoam.
■ Handle electrostatic-sensitive components, parts, and
assemblies by the case or PCM laminate. Handle these
items only at static-free workstations.
■ Avoid contact with pins, leads, or circuitry.
■ Turn off power and input signals before inserting or removing
connectors or test equipment.
4–6
Maintenance and Service Guide
Removal and Replacement Preliminaries
4.7 Grounding Equipment and
Methods
Grounding equipment must include either a wrist strap or a
foot strap at a grounded workstation.
■ When seated, wear a wrist strap connected to a grounded
system. Wrist straps are flexible straps with a minimum of
one megohm ±10% resistance in the ground cords. To provide
proper ground, wear a strap snugly against the skin at all times.
On grounded mats with banana-plug connectors, use alligator
clips to connect a wrist strap.
■ When standing, use foot straps and a grounded floor mat.
Foot straps (heel, toe, or boot straps) can be used at standing
workstations and are compatible with most types of shoes
or boots. On conductive floors or dissipative floor mats, use
foot straps on both feet with a minimum of one megohm
resistance between the operator and ground. To be effective,
the conductive strips must be worn in contact with the skin.
Other grounding equipment recommended for use in preventing
electrostatic damage includes:
■ Antistatic tape
■ Antistatic smocks, aprons, and sleeve protectors
■ Conductive bins and other assembly or soldering aids
■ Nonconductive foam
■ Conductive tabletop workstations with ground cords of
one megohm resistance
■ Static-dissipative tables or floor mats with hard ties to
the ground
■ Field service kits
■ Static awareness labels
■ Material-handling packages
■ Nonconductive plastic bags, tubes, or boxes
■ Metal tote boxes
■ Electrostatic voltage levels and protective materials
Maintenance and Service Guide
4–7
Removal and Replacement Preliminaries
Table 4-1 shows how humidity affects the electrostatic voltage
levels generated by different activities.
Table 4-1
Typical Electrostatic Voltage Levels
Relative Humidity
Event
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 V
800 V
400 V
Removing DIPS from plastic tube
2,000 V
700 V
400 V
Removing DIPS from vinyl tray
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCB
26,500 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
✎ A product can be degraded by as little as 700 V.
Table 4-2 lists the shielding protection provided by antistatic
bags and floor mats.
Table 4-2
Static-Shielding Materials
Material
Use
Voltage Protection Level
Antistatic plastic
Bags
1,500 V
Carbon-loaded plastic
Floor mats
7,500 V
Metallized laminate
Floor mats
5,000 V
4–8
Maintenance and Service Guide
5
Removal and Replacement
Procedures
This chapter provides removal and replacement procedures.
There are 78 screws and screw locks, in 15 different sizes, that
may have to be removed, replaced, or loosened when servicing
the notebook. Make special note of each screw and screw lock
size and location during removal and replacement.
Refer to Appendix C, “Screw Listing,” for detailed information
on screw and screw lock sizes, locations, and usage.
Maintenance and Service Guide
5–1
Removal and Replacement Procedures
5.1 Serial Number
Report the notebook serial number to HP when requesting
information or ordering spare parts. The serial number is
located on the bottom of the notebook.
Serial Number Location
5–2
Maintenance and Service Guide
Removal and Replacement Procedures
5.2 Disassembly Sequence Chart
Use the chart below to determine the section number to be
referenced when removing notebook components.
Disassembly Sequence Chart
Section
Description
# of Screws Removed
5.3
Preparing the notebook for
disassembly
Battery pack
0
5.4
Hard drive
2 loosened to remove the
hard drive cover
1 loosened to remove the
hard drive
6 to disassemble hard drive
5.5
Notebook feet
0
5.6
MultiBay II device
1
5.7
External memory module
1 loosened to remove the
memory module
compartment cover
5.8
Bluetooth board
1 loosened to remove the
Bluetooth board cover
2 removed to remove
Bluetooth board
5.9
Keyboard
2
5.10
Switch cover
3 to remove the switch cover
6 to remove the LED board
5.11
RTC battery
0
5.12
Thermal plate
4 loosened
4 removed
Maintenance and Service Guide
5–3
Removal and Replacement Procedures
Disassembly Sequence Chart (Continued)
Section
Description
# of Screws Removed
5.13
Heat sink
4 loosened
5.14
Processor
1 loosened
5.15
TPM security card
1
5.16
Internal memory module
0
5.17
TouchPad
1
5.18
Mini PCI communications card
0
Å
To prevent an unresponsive system and the display of a
warning message, install only a Mini PCI device authorized
for use in your notebook by the governmental agency that
regulates wireless devices in your country. If you install a
device and then receive a warning message, remove the
device to restore notebook functionality. Then contact
Customer Care.
5.19
Display assembly
8
5.20
Top cover
2 rubber screw covers
16 screws
5.21
Modem board
2
5.22
System board
7 screws
2 screw locks
5.23
System board frame
2
5.24
Push button module
1
5.25
Serial connector module
2 screw locks
5.26
Audio board
2
5–4
Maintenance and Service Guide
Removal and Replacement Procedures
5.3 Preparing the Notebook for
Disassembly
Before you begin any removal or installation procedures:
1. Shut down the notebook. If you are unsure whether the
notebook is off or in hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
Battery Pack Spare Part Number Information
8-cell, 4.8-AHr
Maintenance and Service Guide
372771-001
5–5
Removal and Replacement Procedures
4. Remove the battery pack by following these steps:
a. Turn the notebook upside down with the rear panel
toward you.
b. Slide and release the battery pack lock latch 1 to the right.
(The battery pack partially disengages from the
notebook.)
c. Slide and hold the battery pack release latch 2 to the
right.
d. Slide the battery pack straight back 3 and remove it.
Removing the Battery Pack
Reverse the above procedure to install the battery pack.
5–6
Maintenance and Service Guide
Removal and Replacement Procedures
5.4 Hard Drive
Hard Drive Spare Part Number Information
7200-rpm
60-GB
380950-001
5400-rpm
80-GB
60-GB
40-GB
379810-001
379809-001
379808-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Loosen the 2 PM2.0×4.0 screws 1 that secure the hard drive
cover to the notebook.
3. Lift the left side of the hard drive cover and swing it to the
right 2.
4. Remove the hard drive cover.
hard drive cover is included in the Miscellaneous
✎ The
Plastics Kit, spare part number 382691-001.
Removing the Hard Drive Cover
Maintenance and Service Guide
5–7
Removal and Replacement Procedures
5. Loosen the PM2.5×13.0 spring-loaded hard drive retention
screw 1.
6. Grasp the mylar tab 2 on the left side of the hard drive and
slide the hard drive to the right 3 to disconnect it from the
system board.
7. Remove the hard drive from the hard drive bay 4.
Removing the Hard Drive
5–8
Maintenance and Service Guide
Removal and Replacement Procedures
8. Remove the following:
1 Two PM3.0×5.0 screws
2 Two PM3.0×4.0 screws
3 Two PM1.5×4.0 screws
9. Lift the frame straight up 4 to remove if from the hard drive.
10. Remove the hard drive connector 5 from the hard drive.
Removing the Hard Drive Frame and Connector
Reverse the above procedure to reassemble and install the
hard drive.
Maintenance and Service Guide
5–9
Removal and Replacement Procedures
5.5 Notebook Feet
The notebook feet are adhesive-backed rubber pads. The feet are
included in the Miscellaneous Plastics Kit, spare part number
382691-001.
Replacing the Notebook Feet
5–10
Maintenance and Service Guide
Removal and Replacement Procedures
5.6 MultiBay II Device
MultiBay II Device Spare Part Number Information
DVD-ROM drive
DVD+RW/R and CD-RW Combo Drive
DVD/CD-RW Combo Drive
373314-001
375557-001
373315-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Position the notebook with the left side toward you.
3. If it is installed, remove the T8M2.0×4.0 screw 1 that
secures the MultiBay II device to the notebook.
4. Gently press in on the left side of the device 2 to unlock it.
5. Slide the device 3 from the notebook.
Removing the MultiBay II Device
Reverse the above procedure to install a MultiBay II device.
Maintenance and Service Guide
5–11
Removal and Replacement Procedures
5.7 External Memory Module
Memory Module Spare Part Number Information
DDR2, PC2-4200, CL3, 533 MHz
1024 MB
512 MB
256 MB
373121-001
373120-001
373119-001
DDR2, PC2-3200, CL3, 400 MHz
1024 MB
512 MB
256 MB
391021-001
391020-001
391019-001
1. Prepare the notebook for disassembly (refer to Section 5.3).
2. Position the notebook with the front toward you.
5–12
Maintenance and Service Guide
Removal and Replacement Procedures
3. Loosen the PM2.0×4.0 screw 1 that secures the memory
module compartment cover to the notebook.
4. Lift the right side of the cover up and swing it to the left 2.
5. Remove the memory module compartment cover.
memory module compartment cover is included in the
✎ The
Miscellaneous Plastics Kit, spare part number 382691-001.
Removing the Memory Module Compartment Cover
Maintenance and Service Guide
5–13
Removal and Replacement Procedures
6. Spread the retaining tabs 1 on each side of the memory
module socket to release the memory module. (The side of
the module opposite the socket rises away from the
notebook.)
7. Slide the module away from the socket at an angle 2.
8. Remove the memory module board.
that memory modules are slotted 3 to prevent incorrect
✎ Note
installation into the memory module socket.
Removing the External Memory Module
Reverse the above procedure to install an external memory
module.
5–14
Maintenance and Service Guide
Removal and Replacement Procedures
5.8 Bluetooth Board
Bluetooth Board Spare Part Number Information
Broadcomm Bluetooth wireless board (includes
Bluetooth board cable)
367871-001
1. Prepare the notebook for disassembly (refer to Section 5.3).
2. Position the notebook with the right side toward you.
3. Loosen the PM1.5×3.0 screw 1 that secures the Bluetooth
cover to the notebook.
4. Remove the Bluetooth cover 2 from the notebook.
Bluetooth cover is included in the Miscellaneous Plastics
✎ The
Kit, spare part number 382691-001.
5. Disconnect the Bluetooth cable 3 from the system board.
Removing the Bluetooth Board
Maintenance and Service Guide
5–15
Removal and Replacement Procedures
6. Remove the two PM1.5×3.0 screws 1 that secure the
Bluetooth board to the Bluetooth cover.
7. Remove the Bluetooth board 2 from the cover.
Removing the Bluetooth Board Cover
Reverse the above procedure to install a Bluetooth board.
5–16
Maintenance and Service Guide
Removal and Replacement Procedures
5.9 Keyboard
Keyboard Spare Part Number Information
With pointing stick
Belgium
Brazil
Czech Republic
Denmark
France
French Canada
Germany
Greece
Hungary
Iceland
International
Israel
Italy
Japan
Korea
378203-181
378203-201
378203-221
378203-081
378203-051
378203-121
378203-041
378203-151
378203-211
378203-DD1
378203-002
378203-BB1
378203-061
378203-291
378203-AD1
Maintenance and Service Guide
Latin America
Norway
Portugal
Russia
Saudi Arabia
Slovakia
Slovenia
Spain
Sweden
Switzerland
Taiwan
Thailand
Turkey
United Kingdom
United States
378203-161
378203-091
378203-131
378203-251
378203-171
378203-231
378203-BA1
378203-071
378203-101
378203-111
378203-AB1
378203-281
378203-141
378203-031
378203-001
5–17
Removal and Replacement Procedures
Keyboard Spare Part Number Information (Continued)
Without pointing stick
Belgium
Brazil
Czech Republic
Denmark
France
French Canada
Germany
Greece
Hungary
Iceland
International
Israel
Italy
Japan
Korea
385548-181
385548-201
385548-221
385548-081
385548-051
385548-121
385548-041
385548-151
385548-211
385548-DD1
385548-002
385548-BB1
385548-061
385548-291
385548-AD1
Latin America
Norway
Portugal
Russia
Saudi Arabia
Slovakia
Slovenia
Spain
Sweden
Switzerland
Taiwan
Thailand
Turkey
United Kingdom
United States
385548-161
385548-091
385548-131
385548-251
385548-171
385548-231
385548-BA1
385548-071
385548-101
385548-111
385548-AB1
385548-281
385548-141
385548-031
385548-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Position the notebook with the front panel toward you.
5–18
Maintenance and Service Guide
Removal and Replacement Procedures
3. Remove the two T8M2.0×9.5 screws that secure the
keyboard to the notebook.
Removing the Keyboard Screws
Maintenance and Service Guide
5–19
Removal and Replacement Procedures
4. Turn the notebook display-side up with the front panel toward
you.
5. Open the notebook as far as possible.
6. Slide the 4 keyboard retention tabs toward you 1. The tabs
are located between the esc and f1 keys, between the f4 and f5
keys, between the f8 and f9 keys, and between the f12 and
delete keys.
7. Lift the rear edge of the keyboard and swing it toward you
until it rests on the palm rest 2.
Releasing the Keyboard
5–20
Maintenance and Service Guide
Removal and Replacement Procedures
8. Release the zero insertion force (ZIF) connector 1 to which
the keyboard cable is connected and disconnect the keyboard
cable 2 from the system board.
✎ Step 9 applies to models with keyboards with pointing sticks.
9. Release the ZIF connector 3 to which the pointing stick
cable is connected and disconnect the pointing stick cable 4
from the system board.
Disconnecting the Keyboard and Pointing Stick Cables
10. Remove the keyboard.
Reverse the above procedure to install the keyboard.
Maintenance and Service Guide
5–21
Removal and Replacement Procedures
5.10 Switch Cover
Switch Cover Spare Part Number Information
For use only with HP Compaq nw8240 and nc8230 models
For use only with HP Compaq nc8220 models
382680-001
384133-001
switch cover spare part kits include the LED board and
✎ Both
LED board cable.
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the keyboard (Section 5.9).
3. Turn the notebook upside down with the rear panel
toward you.
4. Remove the three PM2.0×2.0 screws that secure the switch
cover to the notebook.
Removing the Switch Cover Screws
5–22
Maintenance and Service Guide
Removal and Replacement Procedures
5. Turn the notebook display-side up with the front panel toward
you.
6. Open the notebook as far as possible.
7. Use a flat-blade screwdriver to lift up the left and right hinge
cover sections of the switch cover 1 to detach it from the
notebook.
8. Swing the rear edge of the switch cover up and toward you 2.
Releasing the Switch Cover
Maintenance and Service Guide
5–23
Removal and Replacement Procedures
9. Disconnect the LED board cable 1 from the system board.
10. Remove the switch cover 2.
Removing the Switch Cover
5–24
Maintenance and Service Guide
Removal and Replacement Procedures
necessary, perform the following steps to remove the LED
✎ Ifboard
from the switch cover.
11. Turn the switch cover upside down.
12. Remove the six PM1.5×3.0 screws 1 that secure the
LED board to the switch cover.
13. Remove the LED board 2.
Removing the LED Board
Reverse the above procedure to install the switch cover and
LED board.
Maintenance and Service Guide
5–25
Removal and Replacement Procedures
5.11 RTC Battery
RTC battery is included in the Miscellaneous Plastics Kit,
✎ The
spare part number 382691-001.
1. Prepare the notebook for disassembly (Section 5.3).
2. Release the keyboard (Section 5.9).
3. Disconnect the RTC battery cable 1 from the system board.
4. Remove the RTC battery 2 from the clip in the top cover.
Removing the RTC Battery
Reverse the above procedure to install an RTC battery.
5–26
Maintenance and Service Guide
Removal and Replacement Procedures
5.12 Thermal Plate
Thermal Plate Spare Part Number Information
Thermal plate (includes fan and thermal paste)
382674-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Release the keyboard (Section 5.9).
Maintenance and Service Guide
5–27
Removal and Replacement Procedures
3. Disconnect the fan cable from the system board 1.
following screws should be loosened and removed, then
✎ The
installed, in the 1, 2, 3, 4, 5, 6, 7, 8 sequence stamped on the
thermal plate.
4. Loosen the four PM2.0×10.0 spring-loaded screws 2 that
secure the thermal plate to the notebook.
5. Remove the four T8M2.0×4.0 screws 3 that secure the
thermal plate to the notebook.
6. Remove the thermal plate 4.
Removing the Thermal Plate
Reverse the above procedure to install the thermal plate.
5–28
Maintenance and Service Guide
Removal and Replacement Procedures
5.13 Heat Sink
Heat Sink Spare Part Number Information
Heat sink (includes thermal paste)
379799-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Release the keyboard (Section 5.9).
3. Remove the thermal plate (Section 5.12).
Maintenance and Service Guide
5–29
Removal and Replacement Procedures
following screws should be loosened and installed in the
✎ The
1, 2, 3, 4 sequence stamped on the heat sink.
4. Loosen the four PM2.0×8.0 shoulder screws 1 that secure
the heat sink to the notebook.
to the adhesive quality of the thermal paste located
✎ Due
between the heat sink and processor, it may be necessary to
move the heat sink from side to side to detach the heat sink
from the processor.
5. Lift the right side of the heat sink 2 until it disengages from
the processor.
6. Slide the heat sink to the right 3 and remove it.
Removing the Heat Sink
5–30
Maintenance and Service Guide
Removal and Replacement Procedures
thermal paste should be thoroughly cleaned from the
✎ The
surfaces of the heat sink 1 and processor 2 each time the heat
sink is removed. Thermal paste is included with all heat sink
and processor spare part kits.
Replacing the Thermal Paste
Reverse the above procedure to install the heat sink.
Maintenance and Service Guide
5–31
Removal and Replacement Procedures
5.14 Processor
Processor Spare Part Number Information
Intel Pentium M 770 (2.13-GHz)
Intel Pentium M 760 (2.00-GHz)
Intel Pentium M 750 (1.86-GHz)
Intel Pentium M 740 (1.73-GHz)
Intel Pentium M 730 (1.60-GHz)
378224-001
378223-001
378222-001
378221-001
378220-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Release the keyboard (Section 5.9).
3. Remove the thermal plate (Section 5.12).
4. Remove the heat sink (Section 5.13).
5–32
Maintenance and Service Guide
Removal and Replacement Procedures
5. Use a flat-blade screwdriver to turn the processor locking
screw one-quarter turn counterclockwise 1 until you hear
a click.
6. Lift the processor straight up and remove it 2.
gold triangle 3 on the processor should be aligned in the
✎ The
rear right corner when you install the processor.
Removing the Processor
Reverse the above procedure to install the processor.
Maintenance and Service Guide
5–33
Removal and Replacement Procedures
5.15 TPM Security Card
TPM Security Card Spare Part Number Information
TPM security card
379807-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Release the keyboard (Section 5.9).
3. Remove the PM1.5×3.0 screw 1 that secures the TPM
security card to the notebook.
4. Lift up on the right side of the card to disconnect it from the
system board and remove the card 2.
Removing the TPM Security Card
Reverse the above procedure to install the TPM security card.
5–34
Maintenance and Service Guide
Removal and Replacement Procedures
5.16 Internal Memory Module
Memory Module Spare Part Number Information
1024 MB
512 MB
256 MB
373121-001
373120-001
373119-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Release the keyboard (Section 5.9).
Maintenance and Service Guide
5–35
Removal and Replacement Procedures
3. Spread the retaining tabs 1 on each side of the memory
module socket to release the memory module board. (The
side of the module opposite the socket rises away from
the notebook.)
4. Slide the module away from the socket at an angle 2.
5. Remove the memory module board.
that memory modules are slotted 3 to prevent incorrect
✎ Note
installation into the memory module socket.
Removing the Internal Memory Module
Reverse the above procedure to install an internal memory
module.
5–36
Maintenance and Service Guide
Removal and Replacement Procedures
5.17 TouchPad
TouchPad Spare Part Number Information
For use only with HP Compaq nw8240 models
For use only with HP Compaq nc8230 and nc8220 models
382679-001
382678-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the keyboard (Section 5.9).
3. Turn the notebook upside down with the front toward you.
4. Remove the T8M2.0×9.5 screw that secures the TouchPad to
the notebook.
Removing the TouchPad Screw
Maintenance and Service Guide
5–37
Removal and Replacement Procedures
5. Turn the notebook display-side up with the front toward you.
6. Open the notebook as far as possible.
7. Lift up on the front edge of the TouchPad 1 until it
disengages from the notebook.
8. Slide the TouchPad back 2 until it rests on the notebook.
Releasing the TouchPad
5–38
Maintenance and Service Guide
Removal and Replacement Procedures
9. Disconnect the TouchPad cable 1 from the system board.
10. Remove the TouchPad 2.
Removing the TouchPad
Reverse the above procedure to install the TouchPad.
Maintenance and Service Guide
5–39
Removal and Replacement Procedures
5.18 Mini PCI Communications Card
Mini PCI Communications Card
Spare Part Number Information
802.11b/g Mini PCI modem, for use in most of the world
802.11b/g Mini PCI modem, for use in the rest of the world
381582-001
381583-001
802.11b/g combination wireless local access network (WLAN)
373032-002
card, for use internationally
802.11b/g combination WLAN card, for use in Japan
373032-291
802.11b/g combination WLAN card, for use in the United States 373032-001
802.11a/b/g combination WLAN communications card, for use
internationally
802.11a/b/g combination WLAN communications card, for use
in Japan
802.11a/b/g combination WLAN communications card, for use
in the United States
373033-002
802.11a/b/g Mini PCI WLAN communcations card, for use
in Europe, the Middle East, and Africa
802.11a/b/g Mini PCI WLAN communcations card, for use
in Japan
802.11a/b/g Mini PCI WLAN communcations card, for use in
most of the world
802.11a/b/g Mini PCI WLAN communcations card, for use in the
rest of the world
373900-021
373033-291
373033-001
373900-291
373900-001
373901-001
1. Prepare the notebook for disassembly (Section 5.3).
2. Remove the keyboard (Section 5.9).
3. Remove the TouchPad (Section 5.17).
5–40
Maintenance and Service Guide
Removal and Replacement Procedures
note of which antenna cable is attached to which antenna
✎ Make
clip on the Mini PCI communications card before
disconnecting the cables.
4. Disconnect the auxiliary and main antenna cables 1 from the
Mini PCI communications card.
5. Spread the 2 retaining tabs 2 on each side of the Mini PCI
socket to release the Mini PCI communications card. (The
edge of the card opposite the socket rises away from the
notebook.)
6. Remove the Mini PCI communications card by pulling the
card away from the socket at a 45-degree angle 3.
that the Mini PCI communications card is slotted 4 to
✎ Note
prevent incorrect installation.
Removing a Mini PCI Communications Card
Reverse the above procedure to install a Mini PCI
communications card.
Maintenance and Service Guide
5–41
Removal and Replacement Procedures
5.19 Display Assembly
Display Assembly Spare Part Number Information
15.4-inch, SWXGA, TFT
15.4-inch, WXGA, TFT
15.4-inch, UXGA, TFT
382684-001
382682-001
382683-001
1. Prepare the notebook for disassembly (Section 5.3)
and remove the following components:
a. Keyboard (Section 5.9)
b. Switch cover (Section 5.10)
c. TouchPad (Section 5.17)
5–42
Maintenance and Service Guide
Removal and Replacement Procedures
note of which antenna cable is attached to which antenna
✎ Make
clip on the Mini PCI communications card before
disconnecting the cables.
2. Disconnect the wireless antenna cables 1 from the Mini PCI
communications card.
3. Remove the wireless antenna cables from the top cover
clips 2 and 3 through which they are routed.
4. Disconnect the display cable 4 from the system board.
Disconnecting the Wireless Antenna and Display Cables
Maintenance and Service Guide
5–43
Removal and Replacement Procedures
5. Remove the two T8M2.0×9.5 screws 1 and the two
PM2.0×2.0 screws 2 that secure the display assembly to
the notebook.
Removing the Display Screws
5–44
Maintenance and Service Guide
Removal and Replacement Procedures
6. Position the notebook with the rear panel toward you.
7. Remove the four T8M2.0×9.5 screws 1 that secure the
display assembly to the notebook.
8. Lift the display assembly straight up 2 to remove it.
Removing the Display
Reverse the above procedure to install the display assembly.
Maintenance and Service Guide
5–45
Removal and Replacement Procedures
5.20 Top Cover
Top Cover Spare Part Number Information
For use only with HP Compaq nw8240 models
For use only with HP Compaq nc8230 and nc8220 models
382679-001
382678-001
1. Prepare the notebook for disassembly (Section 5.3)
and remove the following components:
a. Hard drive (Section 5.4)
b. Keyboard (Section 5.9)
c. Switch cover (Section 5.10)
d. TouchPad (Section 5.17)
e. Display assembly (Section 5.19)
2. Turn the notebook upside down with the front panel
toward you.
5–46
Maintenance and Service Guide
Removal and Replacement Procedures
3. Remove the two rubber screw covers 1 and the eleven
T8M2.0×9.5 screws 2 that secure the top cover to the
notebook.
Removing the Top Cover Screws, Part 1
Maintenance and Service Guide
5–47
Removal and Replacement Procedures
4. Turn the notebook right-side up with the front panel
toward you.
5. Disconnect the speaker cable 1 from the system board.
6. Remove the five T8M2.0×4.0 screws 2 that secure the top
cover to the notebook.
Removing the Top Cover Screws, Part 2
5–48
Maintenance and Service Guide
Removal and Replacement Procedures
7. Lift the front edge of the top cover 1 until it disengages from
the base enclosure.
8. Lift the top cover straight up 2 and remove it.
Removing the Top Cover
Reverse the above procedure to install the top cover.
Maintenance and Service Guide
5–49
Removal and Replacement Procedures
5.21 Modem Board
Modem Board Spare Part Number Information
Modem board (high-speed 56K)
325521-001
1. Prepare the notebook for disassembly (Section 5.3)
and remove the following components:
a. Hard drive (Section 5.4)
b. Keyboard (Section 5.9)
c. Switch cover (Section 5.10)
d. TouchPad (Section 5.17)
e. Display assembly (Section 5.19)
f. Top cover (Section 5.20)
5–50
Maintenance and Service Guide
Removal and Replacement Procedures
2. Remove the two T8M2.0×4.0 screws 1 that secure the
modem board to the system board.
3. Lift the right side of the modem board 2 to disconnect it
from the system board.
4. Disconnect the modem cable 3 from the modem board.
5. Remove the modem board.
Removing the Modem Board
Reverse the above procedure to install the modem board.
Maintenance and Service Guide
5–51
Removal and Replacement Procedures
5.22 System Board
System Board Spare Part Number Information
With 128-MB video memory, for use only with HP Compaq
nw8240 models
With 128-MB video memory, for use only with HP Compaq
nc8230 and nc8220 models
With 64-MB video memory, for use only with HP Compaq
nc8230 and nc8220 models
382686-001
382687-001
382688-001
replacing the system board, ensure that the following
✎ When
components are removed from the defective system board and
installed on the replacement system board:
■ Memory modules (Section 5.7 and Section 5.16)
■ Processor (Section 5.14)
■ TPM security card (Section 5.15)
■ Mini PCI communications card (Section 5.18)
■ Modem board (Section 5.21)
5–52
Maintenance and Service Guide
Removal and Replacement Procedures
1. Prepare the notebook for disassembly (Section 5.3) and
remove the following components:
a. Hard drive (Section 5.4)
b. MultiBay II device (Section 5.6)
c. Bluetooth board (Section 5.8)
d. Keyboard (Section 5.9)
e. Switch cover (Section 5.10)
f. Thermal plate (Section 5.12)
g. Heat sink (Section 5.13)
h. TouchPad (Section 5.17)
i. Display assembly (Section 5.19)
j. Top cover (Section 5.20)
Maintenance and Service Guide
5–53
Removal and Replacement Procedures
2. Disconnect the RTC battery cable from the system board
(Section 5.11).
3. Position the notebook with the front panel toward you.
4. Disconnect the audio board cables 1 and 2 from the
audio board.
Disconnecting the Audio Board Cables
5–54
Maintenance and Service Guide
Removal and Replacement Procedures
5. Position the notebook with the rear panel toward you.
6. Remove the following:
1 Two HM5.0×10.0 screw locks on each side of the external
monitor connector
2 Seven T8M2.0×6.0 screws
Removing the System Board Screws and Screw Locks
Maintenance and Service Guide
5–55
Removal and Replacement Procedures
7. Flex the left side of the base enclosure 1 until the
serial connector 2 is clear of the base enclosure.
8. Lift the left side of the system board 3 until it rests at
an angle.
Releasing the System Board, Part 1
5–56
Maintenance and Service Guide
Removal and Replacement Procedures
9. Flex the right side of the base enclosure 1 until the USB 2,
1394 3, S-Video 4, and RJ-45 connectors 5 are clear of the
base enclosure.
10. Lift the right side of the system board 6 until it rests at an
angle.
Releasing the System Board, Part 2
Maintenance and Service Guide
5–57
Removal and Replacement Procedures
11. Lift the system board straight up and remove it.
Removing the System Board
Reverse the above procedure to install the system board.
5–58
Maintenance and Service Guide
Removal and Replacement Procedures
5.23 System Board Frame
System Board Frame Spare Part Number Information
System board frame (includes RJ-11 modem cable)
382689-001
1. Prepare the notebook for disassembly (Section 5.3) and
remove the following components:
a. Hard drive (Section 5.4)
b. MultiBay II device (Section 5.6)
c. Bluetooth board (Section 5.8)
d. Switch cover (Section 5.10)
e. Keyboard (Section 5.9)
f. Thermal plate (Section 5.12)
g. Heat sink (Section 5.13)
h. TouchPad (Section 5.17)
i. Display assembly (Section 5.19)
j. Top cover (Section 5.20)
k. System board (Section 5.22)
Maintenance and Service Guide
5–59
Removal and Replacement Procedures
2. Disconnect the following cables from the system board:
1 Audio connector board cable
2 USB connector board cable
3 Serial connector board cable
4 Modem cable
3. Remove the two T8M2.0×4.0 screws 5 that secure the
system board to the system board frame.
Disconnecting the System Board Cables
5–60
Maintenance and Service Guide
Removal and Replacement Procedures
4. Lift the rear edge of the system board 1 until it rests at an
angle.
5. Slide the system board back 2 until the front-right section of
the system board 3 is clear of the screw boss 4 on the system
board frame.
6. Remove the system board 5 from the system board frame.
Removing the System Board from the System Board Frame
Maintenance and Service Guide
5–61
Removal and Replacement Procedures
7. If necessary, remove the RJ-11 connector module and
cable 1 from the clips 2 in the system board frame.
Removing the RJ-11 Connector Module and Cable
Reverse the above procedures to install the system board frame.
5–62
Maintenance and Service Guide
Removal and Replacement Procedures
5.24 Push Button Module
Push Button Module Spare Part Number Information
Push button module
382693-001
1. Prepare the notebook for disassembly (Section 5.3) and
remove the following components:
a. Hard drive (Section 5.4)
b. MultiBay II device (Section 5.6)
c. Bluetooth board (Section 5.8)
d. Switch cover (Section 5.10)
e. Keyboard (Section 5.9)
f. Thermal plate (Section 5.12)
g. Heat sink (Section 5.13)
h. TouchPad (Section 5.17)
i. Display assembly (Section 5.19)
j. Top cover (Section 5.20)
k. System board (Section 5.22)
Maintenance and Service Guide
5–63
Removal and Replacement Procedures
2. Remove the PM2.0×6.0 screw 1 that secures the push button
module to the base enclosure.
3. Remove the push button module 2.
Removing the Push Button Module
Reverse the above procedures to install the push button module.
5–64
Maintenance and Service Guide
Removal and Replacement Procedures
5.25 Serial Connector Module
Serial Connector Module Spare Part Number Information
Serial connector module
382690-001
1. Prepare the notebook for disassembly (Section 5.3)
and remove the following components:
a. Hard drive (Section 5.4)
b. MultiBay II device (Section 5.6)
c. Bluetooth board (Section 5.8)
d. Switch cover (Section 5.10)
e. Keyboard (Section 5.9)
f. Thermal plate (Section 5.12)
g. Heat sink (Section 5.13)
h. TouchPad (Section 5.17)
i. Display assembly (Section 5.19)
j. Top cover (Section 5.20)
k. System board (Section 5.22)
Maintenance and Service Guide
5–65
Removal and Replacement Procedures
2. Remove the two HM5.0×10.0 screw locks 1 that secure the
serial connector module to the system board frame.
3. Remove the serial connector module 2 from the system
board frame.
Removing the Serial Connector Module and Cable
Reverse the above procedure to install the serial connector
module.
5–66
Maintenance and Service Guide
Removal and Replacement Procedures
5.26 Audio Board
Audio Board Spare Part Number Information
Audio board (includes audio board cable)
382677-001
1. Prepare the notebook for disassembly (Section 5.3)
and remove the following components:
a. Hard drive (Section 5.4)
b. MultiBay II device (Section 5.6)
c. Bluetooth board (Section 5.8)
d. Switch cover (Section 5.10)
e. Keyboard (Section 5.9)
f. Thermal plate (Section 5.12)
g. Heat sink (Section 5.13)
h. TouchPad (Section 5.17)
i. Display assembly (Section 5.19)
j. Top cover (Section 5.20)
k. System board (Section 5.22)
Maintenance and Service Guide
5–67
Removal and Replacement Procedures
2. Remove the two T8M2.0×4.0 screws 1 that secure the audio
board to the base enclosure.
3. Lift the left side of the audio board 2 to disengage it from the
base enclosure.
Removing the Audio Board
Reverse the above procedure to install the audio board.
5–68
Maintenance and Service Guide
6
Specifications
This chapter provides physical and performance specifications.
Table 6-1
Notebook
Dimensions
Height
Width
Depth (front to back)
Weight
Full-featured model with optical
drive and 8-cell battery pack
Defeatured model with 8-cell
battery pack
Metric
U.S.
35.6 cm
26.0 cm
2.8 to 3.4 cm
14.02 in
10.24 in
1.1 to 1.34 in
2.85 kg
6.25 lbs
2.60 kg
5.73 lbs
Input Power
Operating voltage
Operating current
18.5 V dc @ 3.5 A - 90 W
3.5 A
Temperature
Operating (not writing to
optical disc)
Operating (writing to optical disc)
Nonoperating
Maintenance and Service Guide
0°C to 35°C
32°F to 95°F
5°C to 35°C
-20°C to 60°C
41°F to 95°F
-4°F to 140°F
6–1
Specifications
Table 6-1
Notebook (Continued)
Relative humidity (noncondensing)
Operating
Nonoperating
10% to 90%
5% to 95%
10% to 90%
5% to 95%
-15 m to 3,048 m
-15 m to 12,192 m
-50 ft to 10,000 ft
-50 ft to 40,000 ft
Maximum altitude (unpressurized)
Operating (14.7 to 10.1 psia)
Nonoperating (14.7 to 4.4 psia)
Shock
Operating
Nonoperating
125 g, 2 ms, half-sine
200 g, 2 ms, half-sine
Random Vibration
Operating
Nonoperating
0.75 g zero-to-peak, 10 Hz to 500 Hz,
0.25 oct/min sweep rate
1.50 g zero-to-peak, 10 Hz to 500 Hz,
0.5 oct/min sweep rate
product safety standards specify thermal limits for plastic
✎ Applicable
surfaces. The notebook operates well within this range of temperatures.
6–2
Maintenance and Service Guide
Specifications
Table 6-2
15.4-inch, WSXGA, TFT Display
Dimensions
Height
Width
Diagonal
20.7 cm
33.1 cm
39.1 cm
Number of colors
Up to 16.8 million
Contrast ratio
200:1
Brightness
180 nits typical
8.1 in
13.0 in
15.4 in
Pixel resolution
Pitch
Format
Configuration
0.197 × 0.197 mm
1680 × 1050
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Total power consumption
5.5 W
Viewing angle
+/-65° horizontal, +/-50° vertical typical
Maintenance and Service Guide
6–3
Specifications
Table 6-3
15.4-inch, WXGA, TFT Display
Dimensions
Height
Width
Diagonal
20.7 cm
33.1 cm
39.1 cm
8.1 in
13.0 in
15.4 in
Number of colors
Up to 16.8 million
Contrast ratio
200:1
Brightness
180 nits typical
Pixel resolution
Pitch
Format
Configuration
0.259 × 0.259 mm
1280 × 800
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Total power consumption
5.5 W
Viewing angle
+/-65° horizontal, +50° vertical typical
6–4
Maintenance and Service Guide
Specifications
Table 6-4
15.4-inch, UXGA, TFT Display
Dimensions
Height
Width
Diagonal
20.7 cm
33.1 cm
39.1 cm
Number of colors
Up to 16.8 million
Contrast ratio
200:1
Brightness
180 nits typical
8.1 in
13.0 in
15.4 in
Pixel resolution
Pitch
Format
Configuration
0.279 × 0.279 mm
1600 × 1200
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Total power consumption
5.5 W
Viewing angle
+/-65° horizontal, +50° vertical typical
Maintenance and Service Guide
6–5
Specifications
Table 6-5
Hard Drives
60-GB*
80-GB*
60-GB*
40-GB*
9.5 mm
70 mm
102 g
9.5 mm
70 mm
99 g
9.5 mm
70 mm
102 g
9.5 mm
70 mm
99 g
ATA-5
ATA-5
ATA-5
ATA-5
100 MB/sec
100 MB/sec
100 MB/sec
100 MB/sec
ATA security
ATA security
ATA security
ATA security
Dimensions
Height
Width
Weight
Interface type
Transfer rate
Synchronous
(maximum)
Security
✎
Certain restrictions and exclusions apply. Consult Customer Care
for details.
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual
accessible capacity is less.
†
Actual drive specifications may differ slightly.
6–6
Maintenance and Service Guide
Specifications
Table 6-5
Hard Drives (Continued)
60-GB*
80-GB*
60-GB*
40-GB*
3 ms
13 ms
24 ms
3 ms
13 ms
24 ms
Seek times (typical read, including setting)
Single track
Average
Maximum
3 ms
13 ms
24 ms
3 ms
13 ms
24 ms
Logical blocks†
117,210,240
156,301,488 117,210,240 78,140,160
Disk rotational
speed
5400 rpm
7200 rpm
Operating
temperature
✎
5400 rpm
5400 rpm
5°C to 55°C (41°F to 131°F)
Certain restrictions and exclusions apply. Consult Customer Care
for details.
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual
accessible capacity is less.
†
Actual drive specifications may differ slightly.
Maintenance and Service Guide
6–7
Specifications
Table 6-6
Primary 8-cell, Li-Ion Battery Pack
Dimensions
Height
Width
Depth
Weight
2.00 cm
9.40 cm
13.40 cm
0.34 kg
0.79 in
3.70 in
5.28 in
0.75 lb
Energy
Voltage
Amp-hour capacity
Watt-hour capacity
11.1 V
4.4 Ah
48 Wh
Temperature
Operating
Nonoperating
6–8
5°C to 45°C
0°C to 60°C
41°F to 113°F
32°F to 140°F
Maintenance and Service Guide
Specifications
Table 6-7
DVD-ROM Drive
Applicable disc
DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18)
CD-ROM (Mode 1 and 2)
CD Digital Audio
CD-XA ready (Mode 2, Form 1 and 2)
CD-I ready (Mode 2, Form 1 and 2)
CD-R
CD-RW
Photo CD (single and multisession)
CD-Bridge
Center hole diameter
1.5 cm (0.59 in)
Disc diameter
Standard disc
Mini disc
12 cm (4.72 in)
8 cm (3.15 in)
Disc thickness
1.2 mm (0.047 in)
Track pitch
0.74 µm
Access time
CD
DVD
< 100 ms
< 175 ms
< 125 ms
< 225 ms
Random
Full stroke
Audio output level
Line-out, 0.7 Vrms
Cache buffer
512 KB
Data transfer rate
CD-R (24X)
CD-RW (10X)
CD-ROM (24X)
DVD (8X)
Multiword DMA mode 2
3600 KB/s (150 KB/s at 1X CD rate)
1500 KB/s (150 KB/s at 1X CD rate)
3600 KB/s (150 KB/s at 1X CD rate)
10,800 KB/s (1,352 KB/s at 1X DVD rate)
16.6 MB/s
Startup time
< 10 seconds
Stop time
< 3 seconds
Maintenance and Service Guide
6–9
Specifications
Table 6-8
DVD/CD-RW Combo Drive
Applicable disc
Read:
Write:
DVD-R, DVD-RW,
CD-R and CD-RW
DVD-ROM (DVD-5,
DVD-9, DVD-10,
DVD-18),
CD-ROM (Mode 1 and 2)
CD Digital Audio
CD-XA ready (Mode 2,
Form 1 and 2)
CD-I ready (Mode 2,
Form 1 and 2)
CD-R, CD-RW
Photo CD (single and
multisession)
CD-Bridge
Center hole diameter
1.5 cm (0.59 in)
Disc diameter
Standard disc
Mini disc
6–10
12 cm (4.72 in)
8 cm (3.15 in)
Maintenance and Service Guide
Specifications
Table 6-8
DVD/CD-RW Combo Drive (Continued)
Disc thickness
1.2 mm (0.047 in)
Track pitch
0.74 µm
Access time
CD media
DVD media
< 110 ms
< 210 ms
< 130 ms
< 225 ms
Random
Full stroke
Audio output level
Line-out, 0.7 V rms
Cache buffer
2 MB
Data transfer rate
CD-R (24X)
CD-RW (10X)
CD-ROM (24X)
DVD (8X)
Multiword DMA mode 2
3600 KB/s (150 KB/s at 1X CD rate)
1500 KB/s (150 KB/s at 1X CD rate)
3600 KB/s (150 KB/s at 1X CD rate)
10,800 KB/s (1352 KB/s at 1X DVD rate)
16.6 MB/s
Startup time
< 15 seconds
Stop time
< 6 seconds
Maintenance and Service Guide
6–11
Specifications
Table 6-9
DVD+RW/R and CD-RW Combo Drive
Applicable disc
Read:
DVD-R, DVD-RW,
DVD-ROM (DVD-5,
DVD-9, DVD-10,
DVD-18),
CD-ROM (Mode 1
and 2)
CD Digital Audio
CD-XA ready (Mode
2, Form 1 and 2)
CD-I ready (Mode 2,
Form 1 and 2)
CD-R, CD-RW
Photo CD (single
and multisession)
CD-Bridge
Center hole diameter
1.5 cm (0.59 in)
Write:
CD-R and CD-RW
DVD-R and
DVD-RW
Disc diameter
Standard disc
Mini disc
6–12
12 cm (4.72 in)
8 cm (3.15 in)
Maintenance and Service Guide
Specifications
Table 6-9
DVD+RW/R and CD-RW Combo Drive (Continued)
Disc thickness
1.2 mm (0.047 in)
Track pitch
0.74 µm
Access time
CD
DVD
< 175 ms
< 285 ms
< 230 ms
< 335 ms
Random
Full stroke
Audio output level
Audio-out, 0.7 Vrms
Cache buffer
2 MB
Data transfer rate
CD-R (16X)
CD-RW (8X)
CD-ROM (24X)
DVD (8X)
DVD-R (4X)
DVD-RW (2X)
Multiword DMA mode 2
2,400 KB/s (150 KB/s at 1X CD rate)
1,200 KB/s (150 KB/s at 1X CD rate)
3,600 KB/s (150 KB/s at 1X CD rate)
10,800 KB/s (1,352 KB/s at 1X DVD rate)
5,400 KB/s (1,352 KB/s at 1X DVD rate)
2,700 KB/s (1,352 KB/s at 1X DVD rate)
16.6 MB/s
Startup time
< 15 seconds
Stop time
< 6 seconds
Maintenance and Service Guide
6–13
Specifications
Table 6-10
System DMA
Hardware DMA
System Function
DMA0
Not applicable
DMA1*
Not applicable
DMA2*
Not applicable
DMA3
Not applicable
DMA4
Direct memory access controller
DMA5*
Available for PC Card
DMA6
Not assigned
DMA7
Not assigned
*PC Card controller can use DMA 1, 2, or 5.
6–14
Maintenance and Service Guide
Specifications
Table 6-11
System Interrupts
Hardware IRQ
System Function
IRQ0
System timer
IRQ1
Standard 101-/102-Key or Microsoft Natural Keyboard
IRQ2
Cascaded
IRQ3
Intel 82801DB/DBM USB2 Enhanced Host
Controller—24CD
IRQ4
COM1
IRQ5*
Conexant AC—Link Audio
Intel 82801DB/DBM SMBus Controller—24C3
Data Fax Modem with SmartCP
IRQ6
Diskette drive
IRQ7*
Parallel port
IRQ8
System CMOS/real-time clock
IRQ9*
Microsoft ACPI-compliant system
IRQ10*
Intel USB UHCI controller—24C2
Intel 82852/82855 GM/GME Graphic Controller
Realtek RTL8139 Family PCI fast Ethernet Controller
Maintenance and Service Guide
6–15
Specifications
Table 6-11
System Interrupts (Continued)
Hardware IRQ
System Function
IRQ11
Intel USB EHCI controller—24CD
Intel USB UHCI controller—24C4
Intel USB UHCI controller—24C7
Intel Pro/Wireless 2200BG
TI OHCI 1394 host controller
TI PCI1410 CardBus controller
IRQ12
Synaptics PS/2 TouchPad
IRQ13
Numeric data processor
IRQ14
Primary IDE channel
IRQ15
Secondary IDE channel
*Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9,
IRQ10, or none.
Cards may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or
✎ PC
IRQ15. Either the infrared or the serial port may assert IRQ3 or IRQ4.
6–16
Maintenance and Service Guide
Specifications
Table 6-12
System I/O Addresses
I/O Address (hex)
System Function (shipping configuration)
000 - 00F
DMA controller no. 1
010 - 01F
Unused
020 - 021
Interrupt controller no. 1
022 - 024
Opti chipset configuration registers
025 - 03F
Unused
02E - 02F
87334 “Super I/O” configuration for CPU
040 - 05F
Counter/timer registers
044 - 05F
Unused
060
Keyboard controller
061
Port B
062 - 063
Unused
064
Keyboard controller
065 - 06F
Unused
070 - 071
NMI enable/RTC
072 - 07F
Unused
080 - 08F
DMA page registers
090 - 091
Unused
092
Port A
093 - 09F
Unused
0A0 - 0A1
Interrupt controller no. 2
Maintenance and Service Guide
6–17
Specifications
Table 6-12
System I/O Addresses (Continued)
I/O Address (hex)
System Function (shipping configuration)
0A2 - 0BF
Unused
0C0 - 0DF
DMA controller no. 2
0E0 - 0EF
Unused
0F0 - 0F1
Coprocessor busy clear/reset
0F2 - 0FF
Unused
100 - 16F
Unused
170 - 177
Secondary fixed disk controller
178 - 1EF
Unused
1F0 - 1F7
Primary fixed disk controller
1F8 - 200
Unused
201
Joystick (decoded in ESS1688)
202 - 21F
Unused
220 - 22F
Entertainment audio
230 - 26D
Unused
26E - 26
Unused
278 - 27F
Unused
280 - 2AB
Unused
2A0 - 2A7
Unused
2A8 - 2E7
Unused
2E8 - 2EF
Reserved serial port
6–18
Maintenance and Service Guide
Specifications
Table 6-12
System I/O Addresses (Continued)
I/O Address (hex)
System Function (shipping configuration)
2F0 - 2F7
Unused
2F8 - 2FF
Infrared port
300 - 31F
Unused
320 - 36F
Unused
370 - 377
Secondary diskette drive controller
378 - 37F
Parallel port (LPT1/default)
380 - 387
Unused
388 - 38B
FM synthesizer—OPL3
38C - 3AF
Unused
3B0 - 3BB
VGA
3BC - 3BF
Reserved (parallel port/no EPP support)
3C0 - 3DF
VGA
3E0 - 3E1
PC Card controller in CPU
3E2 - 3E3
Unused
3E8 - 3EF
Internal modem
3F0 - 3F7
“A” diskette controller
3F8 - 3FF
Serial port (COM1/default)
CF8 - CFB
PCI configuration index register (PCIDIVO-1)
CFC - CFF
PCI configuration data register (PCIDIVO-1)
Maintenance and Service Guide
6–19
Specifications
Table 6-13
System Memory Map
Size
Memory Address
System Function
640 KB
00000000-0009FFFF
Base memory
128 KB
000A0000-000BFFFF
Video memory
48 KB
000C0000-000CBFFF
Video BIOS
160 KB
000C8000-000E7FFF
Unused
64 KB
000E8000-000FFFFF
System BIOS
15 MB
00100000-00FFFFFF
Extended memory
58 MB
01000000-047FFFFF
Super extended memory
58 MB
04800000-07FFFFFF
Unused
2 MB
08000000-080FFFFF
Video memory (direct access)
4 GB
08200000-FFFEFFFF
Unused
64 KB
FFFF0000-FFFFFFFF
System BIOS
6–20
Maintenance and Service Guide
A
Connector Pin Assignments
Table A-1
Audio-Out (Headphone)
Pin
Signal
Pin
Signal
1
Audio out, left channel
3
Ground
2
Audio out, right channel
Maintenance and Service Guide
A–1
Connector Pin Assignments
Table A-2
Audio-In (Microphone)
Pin
Signal
Pin
Signal
1
Audio signal in
3
Ground
2
Audio signal in
A–2
Maintenance and Service Guide
Connector Pin Assignments
Table A-3
Universal Serial Bus
Pin
Signal
Pin
Signal
1
+5 VDC
3
Data +
2
Data –
4
Ground
Maintenance and Service Guide
A–3
Connector Pin Assignments
Table A-4
Serial
Pin
Signal
Pin
Signal
1
Carrier detect
6
Data set ready
2
Receive data
7
Ready to send
3
Transmit data
8
Clear to send
4
Data terminal ready
9
Ring indicator
5
Ground
A–4
Maintenance and Service Guide
Connector Pin Assignments
Table A-5
External Monitor
Pin
Signal
Pin
Signal
1
Red analog
9
+5 VDC
2
Green analog
10
Ground
3
Blue analog
11
Monitor detect
4
Not connected
12
DDC 2B data
5
Ground
13
Horizontal sync
6
Ground analog
14
Vertical sync
7
Ground analog
15
DDC 2B clock
8
Ground analog
Maintenance and Service Guide
A–5
Connector Pin Assignments
Table A-6
RJ-45 (Network)
Pin
Signal
Pin
Signal
1
Transmit +
5
Unused
2
Transmit –
6
Receive –
3
Receive +
7
Unused
4
Unused
8
Unused
A–6
Maintenance and Service Guide
Connector Pin Assignments
Table A-7
RJ-11 (Modem)
Pin
Signal
Pin
Signal
1
Unused
4
Unused
2
Tip
5
Unused
3
Ring
6
Unused
Maintenance and Service Guide
A–7
Connector Pin Assignments
Table A-8
S-Video-Out
Pin
Signal
Pin
Signal
1
S-VHS color (C) signal
5
TV-CD
2
Composite video signal
6
S-VHS intensity ground
3
S-VHS intensity (Y) signal
7
Composite video ground
4
S-VHS color ground
A–8
Maintenance and Service Guide
B
Power Cord Set Requirements
3-Conductor Power Cord Set
The wide range input feature of the notebook permits it to operate
from any line voltage from 100 to 120 or 220 to 240 volts AC.
The power cord set included with the notebook meets the
requirements for use in the country where the equipment
is purchased.
Power cord sets for use in other countries must meet the
requirements of the country where the notebook is used.
Maintenance and Service Guide
B–1
Power Cord Set Requirements
General Requirements
The requirements listed below are applicable to all countries.
B–2
■
The length of the power cord set must be at least 1.5 m
(5.0 ft) and a maximum of 2.0 m (6.5 ft).
■
All power cord sets must be approved by an acceptable
accredited agency responsible for evaluation in the
country where the power cord set will be used.
■
The power cord sets must have a minimum current capacity
of 10 amps and a nominal voltage rating of 125 or 250 V AC,
as required by each country’s power system.
■
The appliance coupler must meet the mechanical
configuration of an EN 60 320/IEC 320 Standard Sheet C13
connector for mating with the appliance inlet on the back of
the notebook.
Maintenance and Service Guide
Power Cord Set Requirements
Country-Specific Requirements
3-Conductor Power Cord Set Requirements
Country
Accredited Agency
Applicable Note Number
Australia
EANSW
1
Austria
OVE
1
Belgium
CEBC
1
Canada
CSA
2
Denmark
DEMKO
1
Finland
FIMKO
1
France
UTE
1
Germany
VDE
1
Italy
IMQ
1
Japan
METI
3
✎ NOTES:
1. The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm²
conductor size. Power cord set fittings (appliance coupler and wall plug)
must bear the certification mark of the agency responsible for evaluation
in the country where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG,
3-conductor. The wall plug must be a two-pole grounding type with a
NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a “T” mark
and registration number in accordance with the Japanese Dentori Law. The
flexible cord must be Type VCT or VCTF, 3-conductor, 1.00 mm² conductor
size. The wall plug must be a two-pole grounding type with a Japanese
Industrial Standard C8303 (7 A, 125 V) configuration.
Maintenance and Service Guide
B–3
Power Cord Set Requirements
3-Conductor Power Cord Set Requirements (Continued)
Country
Accredited Agency
Applicable Note Number
The Netherlands
KEMA
1
Norway
NEMKO
1
Sweden
SEMKO
1
Switzerland
SEV
1
United Kingdom
BSI
1
United States
UL
2
✎ NOTES:
1. The flexible cord must be <HAR> Type HO5VV-F, 3-conductor, 1.0 mm²
conductor size. Power cord set fittings (appliance coupler and wall plug)
must bear the certification mark of the agency responsible for evaluation
in the country where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG,
3-conductor. The wall plug must be a two-pole grounding type with a
NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a “T” mark
and registration number in accordance with the Japanese Dentori Law. The
flexible cord must be Type VCT or VCTF, 3-conductor, 1.00 mm² conductor
size. The wall plug must be a two-pole grounding type with a Japanese
Industrial Standard C8303 (7 A, 125 V) configuration.
B–4
Maintenance and Service Guide
C
Screw Listing
This appendix provides specification and reference information
for the screws and screw locks used in the notebook. All screws
and screw locks listed in this appendix are available in the
Screw Kit, spare part number 382692-001.
Maintenance and Service Guide
C–1
Screw Listing
Table C-1
Phillips PM2.0×4.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
3
4.0 mm
2.0 mm
4.0 mm
Where used:
1 Two screws that secure the hard drive cover to the notebook (screws are
captured on the cover by C clips; documented in Section 5.3)
2 One screw that secures the memory module compartment cover to the
notebook (screw is captured on the cover by C clips; documented in
Section 5.7)
Phillips PM2.0×4.0 Screw Locations
C–2
Maintenance and Service Guide
Screw Listing
Table C-2
Phillips PM2.5×13.0 Spring-Loaded Hard Drive Retention
Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
1
13.0 mm
2.5 mm
5.0 mm
Where used:
One screw that secures the hard drive to the notebook (screw is captured on the
hard drive frame by a C clip; documented in Section 5.3)
Phillips PM2.5×13.0 Screw Location
Maintenance and Service Guide
C–3
Screw Listing
Table C-3
Phillips PM3.0×5.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Silver
2
5.0 mm
3.0 mm
5.0 mm
Where used:
1 Two screws that secure the hard drive frame to the hard drive (documented in
Section 5.3)
Table C-4
Phillips PM3.0×4.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Silver
2
5.0
3.0 mm
5.0 mm
Where used:
2 Two screws that secure the hard drive frame to the hard drive (documented in
Section 5.3)
Phillips PM3.0×5.0 and PM3.0×4.0 Screw Locations
C–4
Maintenance and Service Guide
Screw Listing
Table C-5
Phillips PM1.5×4.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
2
5.0 mm
1.5 mm
4.5 mm
Where used:
2 screws that secure the hard drive frame to the hard drive (documented in
Section 5.3)
Phillips PM1.5×4.0 Screw Locations
Maintenance and Service Guide
C–5
Screw Listing
Table C-6
Torx T8M2.0×4.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
16
4.0 mm
2.0 mm
4.5 mm
Where used:
One screw that secures the MultiBay II device to the notebook (documented in
Section 5.6)
Torx T8M2.0×4.0 Screw Location
C–6
Maintenance and Service Guide
Screw Listing
Table C-6
Torx T8M2.0×4.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
16
4.0 mm
2.0 mm
4.5 mm
Where used:
5 screws that secure the top cover to the notebook (documented in
Section 5.20)
Torx T8M2.0×4.0 Screw Locations
Maintenance and Service Guide
C–7
Screw Listing
Table C-6
Torx T8M2.0×4.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
16
4.0 mm
2.0 mm
4.5 mm
Where used:
1 Two screws that secure the modem board to the notebook (documented in
Section 5.21)
2 Two screws that secure the system board to the notebook (documented in
Section 5.22)
Torx T8M2.0×4.0 Screw Locations
C–8
Maintenance and Service Guide
Screw Listing
Table C-6
Torx T8M2.0×4.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
16
4.0 mm
2.0 mm
4.5 mm
Where used:
2 screws that secure the audio board to the notebook (documented in
Section 5.26)
Torx T8M2.0×4.0 Screw Locations
Maintenance and Service Guide
C–9
Screw Listing
Table C-6
Torx T8M2.0×4.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
16
4.0 mm
2.0 mm
4.5 mm
Where used:
4 screws that secure the thermal plate to the notebook (documented in
Section 5.12)
Torx T8M2.0×4.0 Screw Locations
C–10
Maintenance and Service Guide
Screw Listing
Table C-7
Phillips PM1.5×3.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
9
3.0 mm
1.5 mm
4.0 mm
Where used:
1 One black screw that secures the Bluetooth cover to the notebook (screw is
captured on the cover by a C clip; documented in Section 5.8)
mm
Color
Qty.
Length
Thread
Head
Width
Silver
9
3.0 mm
1.5 mm
3.0 mm
Where used:
2 Two silver screws that secure the Bluetooth board to the Bluetooth cover
(documented in Section 5.8)
Phillips PM1.5×3.0 Screw Locations
Maintenance and Service Guide
C–11
Screw Listing
Table C-7
Phillips PM1.5×3.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Silver
9
1.5 mm
3.0 mm
3.0 mm
Where used:
6 screws that secure the LED board to the switch cover (documented in
Section 5.10)
Phillips PM1.5×3.0 Screw Locations
C–12
Maintenance and Service Guide
Screw Listing
Table C-7
Phillips PM1.5×3.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Silver
9
1.5 mm
3.0 mm
4.0 mm
Where used:
One screw that secures the TPM security card to the notebook (documented in
Section 5.15)
Phillips PM1.5×3.0 Screw Location
Maintenance and Service Guide
C–13
Screw Listing
Table C-8
Torx T8M2.0×9.5 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
20
9.5 mm
2.0 mm
5.0 mm
Where used:
1 Two screws that secure the keyboard to the notebook (documented in
Section 5.9)
2 One screw that secures the TouchPad to the notebook (documented in
Section 5.17)
3 Four screws that secure the display assembly to the notebook (documented
in Section 5.19)
Torx T8M2.0×9.5 Screw Locations
C–14
Maintenance and Service Guide
Screw Listing
Table C-8
Torx T8M2.0×9.5 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
20
9.5 mm
2.0 mm
5.0 mm
Where used:
11 screws that secure the top cover to the notebook (documented in
Section 5.20)
Torx T8M2.0×8.0 Screw Locations
Maintenance and Service Guide
C–15
Screw Listing
Table C-8
Torx T8M2.0×9.5 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
20
9.5 mm
2.0 mm
5.0 mm
Where used:
2 screws that secure the display assembly to the notebook (documented in
Section 5.19)
Torx T8M2.0×9.5 Screw Locations
C–16
Maintenance and Service Guide
Screw Listing
Table C-9
Phillips PM2.0×2.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
5
2.0 mm
2.0 mm
7.0 mm
Where used:
3 screws that secure the switch cover to the notebook (documented in
Section 5.10)
Phillips PM2.0×2.0 Screw Locations
Maintenance and Service Guide
C–17
Screw Listing
Table C-9
Phillips PM2.0×2.0 Screw (Continued)
mm
Color
Qty.
Length
Thread
Head
Width
Black
5
2.0 mm
2.0 mm
7.0 mm
Where used:
2 screws that secure the display assembly to the notebook (documented in
Section 5.19)
Phillips PM2.0×2.0 Screw Locations
C–18
Maintenance and Service Guide
Screw Listing
Table C-10
Phillips PM2.0×10.0 Spring-Loaded Screw
mm
Color
Qty.
Length
Thread
Head
Width
Silver
4
10.0 mm
2.0 mm
5.0 mm
Where used:
4 screws that secure the thermal plate to the notebook (documented in
Section 5.12)
Phillips PM2.0×10.0 Spring-Loaded Screw Locations
Maintenance and Service Guide
C–19
Screw Listing
Table C-11
Phillips PM2.0x8.0 Shoulder Screw
mm
Color
Qty.
Length
Thread
Head
Width
Silver
4
8.0 mm
2.0 mm
5.0 mm
Where used:
4 screws that secure the heat sink to the notebook (screws are captured on the
heat sink by C clips; documented in Section 5.13)
Phillips PM2.0x8.0 Shoulder Screw Locations
C–20
Maintenance and Service Guide
Screw Listing
Table C-12
Hex Socket HM5.0×10.0 Screw Lock
mm
Color
Qty.
Length
Thread
Head
Width
Silver
4
10.0 mm
2.5 mm
5.0 mm
Where used:
1 Two screw locks that secure the system board to the notebook (documented
in Section 5.22)
2 Two screw locks that secure the serial connector module to the notebook
(documented in Section 5.25)
Hex Socket HM5.0×10.0 Screw Lock Locations
Maintenance and Service Guide
C–21
Screw Listing
Table C-13
Torx T8M2.0×6.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Black
7
6.0 mm
2.0 mm
4.5 mm
Where used:
7 screws that secure the system board to the notebook (documented in
Section 5.22)
Torx T8M2.0×6.0 Screw Locations
C–22
Maintenance and Service Guide
Screw Listing
Table C-14
Phillips PM2.0×6.0 Screw
mm
Color
Qty.
Length
Thread
Head
Width
Silver
1
6.0 mm
2.0 mm
4.0 mm
Where used:
One screw that secures the push button module to the base enclosure
(documented in Section 5.24)
Phillips PM2.0×6.0 Screw Location
Maintenance and Service Guide
C–23
Index
1394 port 1–10
A
adjustable notebook stand,
spare part number 3–17,
3–20
Advanced Docking Station,
HP, spare part number 3–17,
3–21
arrow keys 1–13
audio board
removal 5–67
spare part number 3–13,
3–24, 5–67
audio board cable, illustrated
3–15
audio troubleshooting 2–23
audio-in jack
location 1–8
pin assignments A–2
audio-out jack
location 1–8
pin assignments A–1
B
base enclosure, spare part
numbers 3–11, 3–24, 3–25
battery bay 1–11, 1–18
Maintenance and Service Guide
battery light 1–7
battery locking latch 1–18
battery pack
removal 5–6
spare part numbers 3–13,
3–20
specifications 6–8
battery release latch 1–19
Bluetooth board
removal 5–15
spare part number 3–11,
3–20, 5–15
Bluetooth cable
disconnecting 5–15
illustrated 3–15
Bluetooth cover
illustrated 3–14
removal 5–15
bottom components 1–18
C
cables, service considerations
4–2
caps lock key 1–13
caps lock light 1–15
carrying case, spare part
numbers 3–17, 3–20
Index–1
Index
components
bottom 1–18
front 1–6
keyboard 1–11, 1–12
left-side 1–9
rear 1–9
right-side 1–8
top 1–14, 1–16
Computer Setup
Advanced Menu 2–6
File Menu 2–3
overview 2–1
Security Menu 2–4
Tools Menu 2–5
Computer Setup defaults 2–2
connector pin assignments
audio-in A–2
audio-out A–1
external monitor A–5
monitor A–5
RJ-11 A–7
RJ-45 A–6
serial A–4
S-Video-out A–8
Universal Serial Bus (USB)
A–3
connectors, service
considerations 4–2
D
design overview 1–20
disassembly sequence chart
5–3
Index–2
diskette drive
OS loading problems 2–21
precautions 4–3
display assembly
removal 5–42
spare part numbers 3–3,
3–24, 5–42
specifications 6–3
display lid switch 1–14
display release button 1–7
docking connector 1–19
docking device,
troubleshooting 2–16
Docking Station, HP, spare
part number 3–17, 3–21
drives, preventing damage 4–3
DVD+RW/R and CD-RW
Combo Drive
precautions 4–3
removal 5–11
spare part number 3–13,
3–16, 3–21, 5–11
specifications 6–12
DVD/CD-RW Combo Drive
precautions 4–3
removal 5–11
spare part number 3–13,
3–16, 3–21, 5–11
specifications 6–10
DVD-ROM drive
precautions 4–3
removal 5–11
spare part number 3–13,
3–16, 3–21, 5–11
specifications 6–9
Maintenance and Service Guide
Index
E
G
electrostatic discharge 4–4,
4–8
external monitor port
location 1–11
pin assignments A–5
grounding equipment and
methods 4–7
F
f1 to f12 keys 1–13
features 1–2
feet
illustrated 3–14
locations 5–10
flowcharts, troubleshooting
no audio 2–23, 2–24
no network/modem
connection 2–28
no OS loading 2–17
no OS loading from
diskette drive 2–21
no OS loading from hard
drive 2–18, 2–19, 2–20
no OS loading from optical
drive 2–22
no power 2–10, 2–12, 2–13
no video 2–14, 2–15
nonfunctioning device
2–25
nonfunctioning docking
device 2–16
nonfunctioning keyboard
2–26
nonfunctioning pointing
device 2–27
fn key 1–13
front components 1–6
Maintenance and Service Guide
H
hard drive
OS loading problems 2–18
precautions 4–3
removal 5–7
spare part numbers 3–13,
3–16, 3–23, 5–7
specifications 6–6
hard drive bay 1–19
hard drive cover
illustrated 3–14
removal 5–7
hard drive light 1–7
headphone jack
location 1–8
pin assignments A–1
heat sink
removal 5–29
spare part number 3–5,
3–23, 5–29
HP Advanced Docking
Station, spare part number
3–17, 3–21
HP Docking Station, spare part
number 3–17, 3–21
I
I/O address specifications
6–17
Info Center button 1–15
infrared port 1–7
interrupt specifications 6–15
Index–3
Index
K
keyboard
removal 5–17
spare part numbers 3–3,
3–5, 3–21, 3–22, 3–23,
3–25, 3–26, 5–17
troubleshooting 2–26
keyboard components 1–11,
1–12
keypad keys 1–13
L
LED board cable 3–15
LED board, removal 5–25
left-side components 1–9
M
mass storage devices, spare
part numbers 3–16
memory map specifications
6–20
memory module
removal 5–12, 5–35
spare part numbers 3–9,
3–21, 3–26, 5–12, 5–35
memory module compartment
1–19
memory module compartment
cover
illustrated 3–14
removal 5–13
microphone 1–8
microphone jack
location 1–8
pin assignments A–2
Index–4
Mini PCI communications
card
removal 5–40
spare part numbers 3–7,
3–20, 3–21, 3–23
Miscellaneous Cable Kit
components 3–15
spare part number 3–15,
3–26
Miscellaneous Plastics Kit
components 3–9, 3–14
spare part number 3–9,
3–14, 3–24
Miscellaneous Plastics Kit (for
use with Docking Station),
spare part number 3–17,
3–23
Miscellaneous Screw Kit,
spare part number 3–25
modem board
removal 5–50
spare part number 3–9,
3–20, 5–50
modem cable
illustrated 3–15
removal 5–62
modem jack
location 1–9
pin assignments A–7
modem, troubleshooting 2–28
monitor port
location 1–11
pin assignments A–5
Maintenance and Service Guide
Index
MultiBay II 1–8
MultiBay II device
removal 5–11
spare part numbers 3–13,
3–16, 3–21, 5–11
N
network jack
location 1–9
pin assignments A–6
network, troubleshooting 2–28
nonfunctioning device,
troubleshooting 2–16, 2–25
notebook feet
illustrated 3–14
locations 5–10
notebook specifications 6–1
num lock key 1–13
num lock light 1–15
O
optical drive
OS loading problems 2–22
precautions 4–3
removal 5–11
spare part numbers 3–13,
3–16, 3–21, 5–11
specifications 6–9, 6–10
P
packing precautions 4–5
PC Card eject buttons 1–10
PC Card slot 1–10
PC Card slot space saver 3–14
plastic parts 4–2
Maintenance and Service Guide
pointing device,
troubleshooting 2–27
pointing stick 1–17
pointing stick buttons 1–17
power connector 1–11
power cord
set requirements B–2
spare part numbers 3–18,
3–19, 3–20
power management features
1–5
power supply, spare part
number 3–18, 3–21
power, troubleshooting 2–10
power/standby button 1–14
power/standby light 1–6
presentation mode button 1–15
processor
removal 5–32
spare part numbers 3–5,
3–23, 5–32
push button module
removal 5–63
spare part number 3–13,
3–25, 5–63
R
rear components 1–9
removal/replacement
preliminaries 4–1
procedures 5–1
right-side components 1–8
RJ-11 connector module and
cable
illustrated 3–15
removal 5–62
Index–5
Index
RJ-11 jack
location 1–9
pin assignments A–7
RJ-45 jack
location 1–9
pin assignments A–6
RTC battery
illustrated 3–14
removal 5–26
S
Screw Kit
contents C–1
spare part number 3–19,
C–1
screw listing C–1
SD Card slot 1–10
security cable slot 1–9
serial connector module
illustrated 3–15
spare part number 3–11,
3–24, 5–65
serial number 3–1, 5–2
serial port
location 1–8
pin assignments A–4
service considerations 4–2
smart card reader 1–10
speakers 1–17
specifications
battery pack 6–8
display 6–3
DVD+RW/R and CD-RW
Combo Drive 6–12
Index–6
DVD/CD-RW Combo
Drive 6–10
DVD-ROM drive 6–9
hard drive 6–6
I/O addresses 6–17
interrupts 6–15
memory map 6–20
notebook 6–1
optical drive 6–9, 6–10
system DMA 6–14
static shielding materials 4–8
S-Video-out jack
location 1–9
pin assignments A–8
switch cover
removal 5–22
spare part numbers 3–3,
3–24, 3–25, 5–22
system board
removal 5–52
spare part numbers 3–11,
3–24, 5–52
system board frame
removal 5–59
spare part number 3–11,
3–24, 5–59
system DMA 6–14
system memory map 6–20
T
thermal plate
removal 5–27
spare part number 3–5,
3–23, 5–27
tools required 4–1
Maintenance and Service Guide
Index
top components 1–14, 1–16
top cover
removal 5–46
spare part numbers 3–9,
3–24, 5–46
TouchPad 1–17
removal 5–37
spare part numbers 3–5,
3–23, 5–37
TouchPad buttons 1–17
TouchPad cable
disconnecting 5–39
illustrated 3–15
TouchPad scroll zone 1–17
TPM security card 3–9
removal 5–34
spare part number 3–23,
5–34
transporting precautions 4–5
travel battery connector 1–19
travel battery, spare part
number 3–20
troubleshooting
audio 2–23
Computer Setup 2–2
docking device 2–16
flowcharts 2–7
keyboard 2–26
modem 2–28
network 2–28
nonfunctioning device
2–16, 2–25
OS loading 2–17
overview 2–1
Maintenance and Service Guide
pointing device 2–27
power 2–10
video 2–14
U
Universal Serial Bus (USB)
board cable, illustrated 3–15
Universal Serial Bus (USB)
diskette drive, spare part
number 3–17, 3–20
Universal Serial Bus (USB)
port
location 1–8, 1–10
pin assignments A–3
V
vent, locations 1–10, 1–19
video troubleshooting 2–14
volume buttons 1–15
W
Windows applications key
1–13
Windows logo key 1–13
wireless button 1–15
wireless light 1–6, 1–15
workstation precautions 4–6
Index–7