DATASHEET
M7i AND M10i
MULTISERVICE
EDGE ROUTERS
Product Overview
M Series Multiservice Edge Routers
uniquely combines best-inclass IP/MPLS capabilities with
unmatched reliability, stability,
security and service richness. These
multiservice edge routing platforms
allow providers and enterprises to
consolidate multiple networks into a
single IP/MPLS infrastructure while
simultaneously generating new
revenues with leading-edge services.
M Series Multiservice Edge Routers
use a hardware-based approach
combined with the highly scalable,
secure and reliable Junos OS,
enabling multiple services without
compromise on a single IP/MPLS
platform. Providers enjoy maximized
revenue and minimized operational
and capital costs.
Product Description
The Juniper Networks® M7i and M10i Multiservice Edge Routers are ideal enterprise routing
solutions for head offices, campuses and corporate backbones needing reliable, secure
and high-performance IP WAN connectivity, Internet access and services. Unlike legacy
routers with monolithic architectures and aging operating systems, the M Series M7i
and M10i Multiservice Edge Routers boast a hardware-based architecture coupled with
Juniper Networks Junos® operating system, Juniper’s modern object-oriented operating
system. This architecture ensures rich packet processing with uncompromising forwarding
performance to support latency-sensitive applications such as voice, video and mission
critical applications. The M7i and M10i routers are the choice for consolidating multiple
services onto a single IP/MPLS network and delivering performance, reliability and security
to the enterprise environment.
Deployed predominantly at the service-provider edge and in high-end, high-performance
enterprise applications, the IP/MPLS M Series Multiservice Edge Routers are capable of
supporting current and emerging Layer 2 and Layer 3 services. From a Layer 2 perspective,
the J-FASE (Juniper Frame and ATM Service Emulation) toolkit, combined with M Series
routing performance, enables accurate emulation of Asynchronous Transfer Mode (ATM)
and Frame Relay services over MPLS. The same multiservice edge routing platform supports
rich Ethernet services, enabling providers to capture revenue from this emerging service.
Layer 2.5 Interworking VPNs are available to smoothly transition customers from ATM/
FR to Ethernet services as demand dictates. M Series routers also deliver rich Layer 3
services, including the industry’s most scalable and comprehensive Layer 3 VPN portfolio,
granular per logical interface quality of service (QoS), hardware-based IPv6, multicast,
Network Access Translation (NAT), stateful firewall and IPsec encryption. New revenues are
generated faster and more cost effectively with the scalable policy control of the Juniper
Networks SDX300 Service Deployment System leveraging these rich features.
1
Architecture and Key Components
Juniper Networks service-built M Series Multiservice Edge
Routers are deployed in the world’s largest networks, delivering
advanced IP/MPLS edge routing services at scale and helping
service providers transform their businesses. Constructed with
clean separation between the control plane, forwarding plane
and services plane, the M Series support multiple services
without compromise on a single platform to maximize revenue
and minimize operational and capital costs. Services supported
include a broad array of VPNs, network-based security, real-time
voice and video, bandwidth on demand, rich multicast of premium
content, IPv6 services, granular accounting and much more. This
IP/MPLS edge routing service portfolio continues to grow with
every release of Junos OS, leveraging the tremendous flexibility
and performance headroom of the service-built architecture.
Applications
The versatile M Series routers can be deployed in both the service
provider environment and in high-end enterprise environments.
Large enterprises typically deploy M7i or M10i in a number of
different locations, including Internet gateway router, WAN router,
campus core router, regional backbone and data center.
Enhanced for the Edge
The versatile IP/MPLS M Series routers can be deployed at the
edge of provider networks, in small and medium cores, and in
peering, route reflector and data center applications. Recent M
Series innovations have dramatically expanded edge capabilities
by leveraging the highly programmable Internet Processor II
application-specific integrated circuit (ASIC) and the IP/MPLS-rich
Junos OS. M Series routers are now deployed and scaling services at
the edge of some of the world’s largest production networks.
Consistent Services to All Customers
The M Series spans from over 7 to 320 Gbps of throughput,
including the M7i, M10i, M40e, M120 and M320 Multiservice
Edge Routers. The same scalable and production-hardened
Junos OS runs on all IP/MPLS M Series, making a consistent set
of capabilities available at all network locations regardless of
customer connection or serving area density.
Access-Agnostic with Leading Densities
Multiservice
Edge
SONET/SDH
Nx. T1/E1. DS3/E3
SMALL/MEDIUM
CORE
Peering
FR/ATM
Route Reflector
Rendezvous Point
Most Comprehensive VPN Portfolio
FR/ATM
Mobile Ethernet
Hosting
Figure 1: Service provider environment
In service provider environments, the M Series is deployed
predominantly as a multiservice edge router but can also be
deployed in small and medium cores, peering, route reflector,
multicast, mobile and data center applications.
M7i
Converged Backbone
CAMPUS
CORE
M7i
Internet Gateway
M7i
M10i
PROVIDER B
M7i
BRANCH
AGGREGATION
Real Time IP-Enabled Branch Offices
Figure 2: Enterprise environment
2
The M Series routers also support the industry’s most
comprehensive VPN portfolio with the ability to simultaneously
run and scale Layer 2 virtual circuits, Layer 2 VPNs, Layer 2.5
Interworking VPNs, Layer 3 2547 VPNs, virtual private LAN service
(VPLS), IPsec, generic routing encapsulation (GRE), IP over IP and
other tunneling mechanisms—with no performance compromise.
This broad set of VPNs meets the needs of the widest possible
set of customers, maximizing the service provider’s revenue while
minimizing required infrastructure. For example, a provider can use
Layer 3 VPNs to deliver an outsourced routing service and can also
use Layer 2 VPNs to provide a point-to-point ATM service over a
common IP/MPLS infrastructure.
Granular QoS and Statistics
DATA
CENTER
PROVIDER A
With its broad interface portfolio, a single M Series router can
provide a single point of edge aggregation for thousands of
customers over any access type—including ATM, Frame Relay,
Ethernet and time-division multiplexing (TDM)–and at any
speed from DS0 up to OC-192/STM-64 and 10 Gigabit Ethernet.
Leveraging dense Ethernet and highly channelized interfaces, the
M Series boast leading densities.
Rich packet processing enables the M Series routers to support
multiple levels of granular QoS per port, per logical circuit (DLCI,
VC/VP, VLAN), and per channel (to DS0) for traffic prioritization.
These comprehensive QoS functions include classification, rate
limiting, shaping, weighted round-robin scheduling, strict priority
queuing, weighted random early detection, random early detection
and packet marking. For network convergence applications, Layer
2 class of service (CoS) can be mapped to Layer 3 CoS on a per
DLCI, per VP/VC or per-VLAN basis. Simultaneously, extensive
statistics can be collected and diagnostics performed at this same
level of granularity to enable flexible billing, traffic planning and
rapid troubleshooting.
Rich Packet Processing and Advanced Services
A broad portfolio of edge routing services can be layered on top
of VPNs for additional revenue generation. A comprehensive suite
of multicast capabilities, including multicast over MPLS VPNs,
enables efficient distribution of premium content. Hardwarebased IPv6 and a number of IPv6 migration tools, such as IPv6
over MPLS, ease access to the benefits of this next-generation
IP protocol without performance compromise. NAT and stateful
firewall can be configured per VPN routing and forwarding table
(VRF) to enable network-based security for additional revenues.
IPsec can be used to support a premium security service for end
users with high security requirements. The M Series servicebuilt edge is continuously enhanced with new packet processing
capabilities to ensure maximum revenue-generation opportunities.
The latest addition in terms of advanced services capabilities is
the integration of the Juniper Networks Multiservices PIC in the M7i
which increases dramatically the embedded service performance
of this platform.
Highly Reliable
The M Series service-built architecture has been constructed
with scale and stability in mind, including the modular and faultprotected design of Junos OS and a rigorous system testing
process. All M Series routers offer redundant power and cooling.
The M10i, M40e, M120 and M320 routers offer fully redundant
M7i Multiservice Edge Router
hardware, including redundant routing engines and Switching/
Forwarding Engine Boards. Junos OS features enhance this
redundant architecture. For example, nonstop forwarding is
enabled in the event of a routing engine failure, via a hitless
switchover, and in-service software upgrades are supported when
a minor software upgrade is required. Other High Availability (HA)
capabilities include graceful protocol routing restart, MPLS fast
reroute, Virtual Router Redundancy Protocol (VRRP), SONET
Automatic Protection Switching (APS), SDH Multiplex Section
Protection (MSP), Bidirectional Forwarding Detection protocol
(BFD) and Link Aggregation Control Protocol (LACP).
Robust Security
All M Series routers support highly scalable J-Protect filtering
capabilities, unicast reverse path forwarding and highperformance rate limiting for industry-leading Denial of Service
(DOS) attack protection. The J-Protect security capabilities of
the M Series can be further enhanced with the Multiservices PIC,
hardware that accelerates additional network-based security
services such as high-speed NAT, stateful firewall with attack
detection and J-Flow accounting. With the rich feature set of Junos
OS combined with industry-leading ASIC technology, M Series
service-built edge routing provides a new level of reliable and
secure service delivery at the edge of service-provider networks.
M10i Multiservice Edge Router
3
M7i and M10i Specifications
Internet Protocols
Voice Support
• IPv4
• FRF.12
• IPv6
• LFI1
Routing and Multicast
• cRTP2
• OSPF
Security
• BGP
• Stateful Firewall2
• RIPv2
• Attack detection2
• Static routes
• DOS & DDOS protections
• IS-IS
• Tunnels (GRE, IP in IP)
• Multicast (IGMPv3, PIM, SDP, DVRMRP, Single Source)
• IPsec DES (56-bit), 3DES (168 bit) encryption3
IP Address Management
• MD5 and SHA-1 authentication
• Static
• Packet filters
• DHCP relay
System Management
MPLS • Junos OS CLI
• LDP
• Junoscope Manager
• RSVP-TE
• J-Web browser interface
• Traffic Engineering
• Service Deployment System (SDX)
• Layer 3 2547 VPN
• SNMPv2 and SNMP v3
• Layer 2 VPN
• Junoscript XML API
• Virtual Private LAN Service (VPLS)
SLA and Measurement
• Diffserv-aware Traffic Engineering
• Real-Time Performance Measurement (delay/jitter)
• MPLS Detour
• Alarm generation on SLA violation
• MPLS Fast Reroute Link Protection
• J-Flow2
• MPLS Fast Reroute Node Protection
Logging and Monitoring
• MPLS Point-to-Multipoint (P2MP) Traffic Engineering
• Syslog
Encapsulations
• Traceroute
• Ethernet (MAC+VLAN Tagged)
• MPLS Ping
• PPP (Synch)
High Availability
• PPPoA
• VRRP
• Frame Relay
• IETF Graceful Restart
• ATM
• Redundant forwarding and routing engines (M10i)
• HDLC
• Graceful Routing Engine Switchover (M10i)
• Serial (RS-232, RS-449,X.21,V.35,EIA-530)
Administration
• 802.1q support
• MLPPP1
• MLFR (FRF.15, FRF.16)1
• L2TP (M7i, M10i and M120 can act as LNS)2
• External administrator database RADIUS
• Configuration rollback
• Commit confirm for changes
• Software upgrades
Traffic Management
• Policing & Shaping
• Class Based Queuing with Prioritization
• WRED
• Queuing based on VLAN/VC/VP/DLCI/Interface/Bundles
These features require the Link Services PIC
1
These features require the optional Adaptive Services Module for the M7i or the Adaptive Services II PIC or Multiservices PIC
2
These features require either ASM, AS or MS PIC, or ES PIC
3
4
Specifications
M7i
M10i
Dimensions
(W x H x D)
17.5 x 3.5 x 18 in
(44.5 x 8.9 x 45.7 cm)
17.5 x 8.75 x 18 in
(44.5 x 22.2 x 45.7 cm)
Fixed interfaces
2 Fast Ethernet or 1 Gigabit Ethernet
None
Number of PIC Slots
4 open slots
8 open slots
Available PICs
See www.juniper.net
See www.juniper.net
Packet per second
16 million packets per second
16 million packets per second
Bits per second
10 Gbps
16 Gbps
WAN uplink
up to 1 Gigabit Ethernet
up to OC-48/STM-16*
Nominal voltage AC (DC option available)
100-240 VAC, 47-63Hz
100-240 VAC, 47-63Hz
Current/power
4-2 Amps, 400 watts
8-4 Amps, 800 watts
Power supplies required
1 required, 2 for redundancy
2 required, 3 for redundancy
Operating temp
32° to 104° F (0° to 40° C)
32° to 104° F (0° to 40° C)
Storage temp
-40° to 158° F (-40° to 70° C)
-40° to 158° F (-40° to 70° C)
Relative humidity (operating)
5% to 90% noncondensing
5% to 90% noncondensing
Platform
Performance
Power System
Environment
Agency Approvals
Safety certifications
CAN/CSA-C22.2 No. 60950-00/UL 60950
EN 60825-1
EN 60825-2
EN 60950
EMC
AS/NZS 3548 Class B (Australia / New Zealand)
BSMI Class B (Taiwan)
EN 55022 Class B Emissions (Europe)
FCC Part 15 Class B (USA)
VCCI Class B (Japan)
ETSI
ETS-300386-2 Telecommunication
Network Equipment Electromagnetic Compatibility Requirements
Immunity
EN 61000-3-2 Power Line Harmonics
EN-61000-3-3
EN 61000-4-2 ESD
EN 61000-4-3 Radiated Immunity
EN 61000-4-4 EFT
EN 61000-4-5 Surge
EN 61000-4-6 Low Frequency Common Immunity
EN 61000-4-11 Voltage Dips and Sags
NEBS compliant
GR-63-Core: NEBS, Physical Protection
GR-1089-Core: EMC and Electrical
Safety for Network
Telecommunications Equipment
SR-3580 NEBS Criteria Levels (Level 3 Compliance)
*OC-48/STM-16 interfaces are only supported on non-enhanced CFEB version
Juniper Networks Services and Support
Juniper Networks is the leader in performance-enabling services that are designed to accelerate, extend, and optimize your highperformance network. Our services allow you to maximize operational efficiency while reducing costs and minimizing risk, achieving a
faster time to value for your network. Juniper Networks ensures operational excellence by optimizing the network to maintain required
levels of performance, reliability, and availability. For more details, please visit juniper.net/us/en/products-services.
5
Ordering Information
Model Number
Description
Model Number
Description
M7i Bundles with RE-400
M10i Bundles with RE-B-1800X1-4G
M7iE-AC-RE400-2FETX-B
M7i base unit: 4 PIC slot chassis, 2 built-in
Fast Ethernet ports (RJ connectors),
cooling, midplane, 1 AC power supply,
Junos OS, 1 enhanced Forwarding Engine,
1 Routing Engine 400 MHz; optional flash
media kit sold separately
M10iE-AC-RE1800-B
M10i base unit: 8 PIC slot chassis,
cooling, midplane, 2 AC power supplies,
1 enhanced Forwarding Engine, 1 Routing
Engine 1,800 MHz, 1 fan tray, Junos OS
and two chassis managers; optional flash
media kit sold separately
M7iE-AC-RE400-1GE-B
M7i base unit: 4 PIC slot chassis, 1 builtin Gigabit Ethernet port (optics sold
separately), cooling, midplane, 1 AC power
supply, Junos OS, 1 Enhanced Forwarding
Engine, 1 Routing Engine 400 MHz;
optional flash media kit sold separately
M10iE-DC-RE1800-B
M10i base unit: 8 PIC slot chassis,
cooling, midplane, DC power, 1 enhanced
Forwarding Engine, 1 Routing Engine 1,800
MHz, 1 fan tray, Junos OS and two chassis
managers; optional flash media kit sold
separately
M7iE-DC-RE400-2FETX-B
M7i base unit: 4 PIC slot chassis, 2 built-in
Fast Ethernet ports (RJ connectors),
cooling, midplane, 1 DC power supply,
Junos OS, 1 enhanced Forwarding Engine,
1 Routing Engine 400 MHz; optional flash
media kit sold separately
M7i/M10i Spares
M7i base unit: 4 PIC slot chassis, 1 builtin Gigabit Ethernet port (optics sold
separately), cooling, midplane, 1 DC power
supply, Junos OS, 1 enhanced Forwarding
Engine, 1 Routing Engine 400 MHz;
optional flash media kit sold separately
M7iE-DC-RE400-1GE-B
M7i Bundles with RE-400
M7iE-AC-5GE-MS-1800-B
M7iE-AC-RE1800-1GE-B
M7iE-AC-RE1800-2FETX-B
M7iE-DC-RE1800-1GE-B
M7iE-DC-RE1800-2FETX-B
M7i base unit, 5 GbE ports, multi-services
module, enhanced IQ2 PIC, NAT/FW
license, cooling, midplane, 1 AC power
supply, Junos OS, 1 enhanced Forwarding
Engine, 1 Routing Engine 1,800 MHz;
optional flash media kit sold separately
M7i base unit: 4 PIC slot chassis, 1 builtin Gigabit Ethernet port (optics sold
separately), cooling, midplane, 1 AC power
supply, Junos OS, 1 enhanced Forwarding
Engine, 1 Routing Engine 1,800 MHz;
optional flash media kit sold separately
M7i base unit: 4 PIC slot chassis, 2 built-in
Fast Ethernet ports (RJ connectors),
cooling, midplane, 1 AC power supply,
Junos OS, 1 enhanced Forwarding Engine,
1 Routing Engine 1,800 MHz; optional flash
media kit sold separately
M7i base unit: 4 PIC slot chassis, 1 builtin Gigabit Ethernet port (optics sold
separately), cooling, midplane, 1 DC power
supply, Junos OS, 1 enhanced Forwarding
Engine, 1 Routing Engine 1,800 MHz;
optional flash media kit sold separately
M7i base unit: 4 PIC slot chassis, 2 Built
in Fast Ethernet ports (RJ connectors),
cooling, midplane, 1 DC power supply,
Junos OS, 1 enhanced Forwarding Engine,
1 Routing Engine 1,800 MHz; optional flash
media kit sold separately
M10i Bundles with RE-400
M10iE-AC-RE400-B
M10iE-DC-RE400-B
6
M10i base unit: 8 PIC slot chassis,
cooling, midplane, 2 AC power supplies,
1 enhanced Forwarding Engine, 1 Routing
Engine 400 MHz, 1 fan tray, Junos OS and
two chassis managers; optional flash
media kit sold separately
M10i base unit: 8 PIC slot chassis,
cooling, midplane, DC power, 1 enhanced
Forwarding Engine, 1 Routing Engine 400
MHz, 1 fan tray, Junos OS and two chassis
managers; optional flash media kit sold
separately
FEB-M10i-M7i-S
M7i/M10i forwarding engine spare
FEB-M7i-SVCS-S
M7i forwarding engine spare with built-in
services module
FEB-M10i-M7i-E-S
M7i enhanced forwarding engine spare
FEB-M7i-SVCS-ASM-E-S
M7i enhanced forwarding engine spare
with built-in Adaptive Services module
FEB-M7i-SVCS-MS-E-S
M7i enhanced forwarding engine spare
with built-in Multiservices module
RE-400-768-S
Routing Engine board spare (400 MHz
Celeron, 768 MB DRAM), optional 1 GB
compact flash needs to be ordered
separately
RE-400-768-WW-S
Routing Engine board spare (400 MHz
Celeron, 768 MB DRAM), optional 1 GB
compact flash needs to be ordered
separately - Junos OS worldwide
RE-B-1800X1-4G-BB
M10i, M7i 1.73 GHz Routing Engine with 4
GB memory, 64 GB SSD, 4 GB CF
RE-B-1800X1-4G-R
M10i, M7i redundant 1.73 GHz Routing
Engine with 4 GB memory, 64 GB SSD, 4
GB CF
RE-B-1800X1-4G-S
M10i, M7i spare 1.73 GHz Routing Engine
with 4 GB memory, 64 GB SSD, 4 GB CF
RE-B-1800X1-4G-WW-S
M10i, M7i WW 1.73 GHz Routing Engine
with 4 GB memory, 64 GB SSD, 4 GB CF
CHAS-MP-M10i-S
M10i chassis spare
CHAS-MP-M7i-1GE-S
M7i chassis spare, 1 built-in GbE port
CHAS-MP-M7i-2FE-S
M7i chassis spare, 2 built-in FE ports
HCM-M10i-S
High availability chassis manager board
for M10i
PWR-M10i-M7i-AC-S
M7i/M10i AC power supply spare
PWR-M10i-M7i-DC-S
M7i/M10i DC power supply spare
FANTRAY-M7i-S
M7i fan tray spare
FANTRAY-M10i-S
M10i fan tray spare
CF-UPG2-1G-S
1 GB compact flash upgrade kit for internal
media usage on RE-400 or RE-850
RE-CF-1G-S
Compact flash media upgrade for RE
MEM-FEB-256-S
Optional M10i, M7i Forwarding Engine
Board (FEB) memory upgrade: 256 MB
DRAM module
MEM-RE-256-S
Optional RE memory upgrade: 256 MB
DRAM module
Ordering Information (continued)
Model Number
Description
Software Licenses
Model Number
Description
Channelized
JS-IPv6-L
IPv6 support on Junos OS (low end)
JS-LR
Logical router support for Junos OS
M7i/M10i Physical Interface Cards
Ethernet
PE-1CHSTM1-SMIR-QPP
1-port channelized STM1 to DS0 IQ PIC,
SM, IR
PE-4CHDS3-QPP
4-port channelized DS3 to DS0 IQ PIC,
BNC
PE-10CHE1-RJ48-QPP-N
10-port channelized E1 to DS0 IQ PIC,
RJ48
PE-1GE-SFP-QPP
1-port Gigabit Ethernet IQ PIC. Requires
SFP optic module
PE-1CHOC3-SMIR-QPP
1-port channelized OC3 to DS0 IQ PIC,
SM, IR
PE-1GE-SFP
1-port Gigabit Ethernet PIC. Requires SFP
optic module
PE-1CHOC12SMIR-QPP
1-port channelized OC-12 to DS0 IQ PIC,
SM, IR
PE-4GE-TYPE1-SFP-IQ2
4-port Type1 Gigabit Ethernet IQ2 PIC;
requires SFP optic module
PE-10CHT1-RJ48-QPP
10-port channelized T1 to DS0 IQ PIC
PE-4GE-TYPE1-SFP-IQ2E
4-port Type 1 Gigabit Ethernet Enhanced
IQ2 PIC; requires SFP optic module
PE-12FE-TX-MDI
12-port 10,100 TX Ethernet PIC that
includes 3-meter VHDCI to RJ21 Ethernet
breakout cable; connects to RJ21 to RJ45
patch panel and services (12) 10,100
Ethernet ports; configured for MDI pinout
PE-12FE-TX-MDIX
PE-4FE-TX
12-port 10,100 TX Ethernet PIC that
includes 3-meter VHDCI to RJ21 Ethernet
breakout cable; connects to RJ21 to RJ45
patch panel and services (12) 10,100
Ethernet ports; configured for MDI pinout
Circuit Emulation
PE-12T1E1-CE-TELCO
12-port discrete T1/E1 (Telco connector)
PE-4CHOC3-CE-SFP
4-port channelized OC3/STM1 (down to
T1/E1); requires SFP optic module
Services
PE-MS-100-1
Multiservices PIC, 1 GB DRAM
PE-AS2-FIPS
Adaptive Services PIC II - FIPS
PE-AS2-LAYER2SERVICES
Adaptive Services PIC II - Layer
2 services: supports link services
(S-LSSL-4, S-LSSL-64, S-LSSL-256),
CRTP (S-CRTP) and tunnel services
(S-TUNNEL)
4-port Fast Ethernet PIC, TX interface,
RJ45 connector
ATM
PE-LS-4
PE-1OC12-ATM2-SMIR
1-port OC-12/STM4 ATM2 IQ PIC, single
mode, IR
Link services PIC, 4 ML bundles, 256 LFI
links, tunnel services
PE-LS-32
PE-2OC3-ATM2-MM
2-port OC-3/STM1 ATM2 IQ PIC, multi
mode
Link services PIC, 32 ML bundles, 256 LFI
links, tunnel services
PE-TUNNEL
Tunnel services PIC with PIC ejector
PE-2OC3-ATM2-SMIR
2-port OC-3/STM1 ATM2 IQ PIC, single
mode, IR
PE-4DS3-ATM2
4-port DS3 ATM2 IQ PIC (ships with
cable)
Software Licenses for the Services PIC or
Module
S-NAT-FW-SINGLE
Single-instance NAT/firewall
S-NAT-FW-MULTI
Multi-instance NAT/firewall
POS
S-ACCT
J-Flow
PE-1OC12-SON-SFP
1-port OC12/STM4 or OC3/STM1, rateselectable PIC; requires OC12 or OC3 SFP
S-CRTP
CRTP
S-LNS
L2TP LNS
PE-2OC3-SON-SFP
2-port OC3/STM1 PIC; requires SFP optic
module
S-ES
IPsec
PE-4OC3-1OC12-SON-SFP
4-port OC3/STM1 or 1-port OC12/STM4,
rate-selectable PIC; requires SFP optic
module
CBL-EIA530-V35-DTE
EIA-530 to V.35 cable (DTE) for M Series
CBL-EIA530-X21-DTE
EIA-530 to X.21 cable (DTE) for M Series
CBL-RJ21-MDI-S
3-meter VHDCI to RJ21 Ethernet cable
spare for PE-12FE-TX
CBL-RJ21-MDIX-S
3-meter VHDCI to RJ21 Ethernet cable
spare for PE-12FE-TX
CBL-SMZ-BNC-M-S
10-ft SMZ to BNC coaxial cable spare for
DS3/E3 PICs
PE-2E3-ATM2
2-port E3 ATM2 IQ PIC (ships with cable)
Clear Channel
Interface Accessories
PE-4DS3
4-port DS3 PIC (and cables) with PIC
ejector
PE-2DS3
2-port DS3 PIC (and cables) with PIC
ejector
PE-4E3-QPP
4-port E3 IQ PIC
PE-2E3
2-port E3 PIC (and cables) with PIC
ejector
SFP-1GE-SX
SFP 1000BASE-SX Gigabit Ethernet optic
module
PE-4E1-COAX
4-port E1 PIC (75-ohm BNC connectors)
(ships with cables)
SFP-1GE-LX
SFP 1000BASE-LX Gigabit Ethernet optic
module
PE-4E1-RJ48
4-port E1 PIC (120-ohm, RJ48 connectors)
SFP-1GE-T
PE-4T1-RJ48
4-port T1 PIC, (120-ohm, RJ48 connectors)
SFP 1000BASE-T Gigabit Ethernet
module (uses Cat 5 cable)
PE-2EIA530
2-port EIA-530 PIC (DB-25 connector)
SFP-1GE-LH
SFP 1000BASE-LH Gigabit Ethernet optic
module, LH
7
Ordering Information (continued)
Model Number
Description
Interface Accessories (continued)
SFP-OC12-SR
SFP OC12/STM4 optic module, SR
SFP-OC12-IR
SFP OC12/STM4 optic module, IR
SFP-OC12-LR
SFP OC12/STM4 optic module, LR
SFP-OC3-SR
SFP OC3 optic module, MM, SR
SFP-OC3-IR
SFP OC3 optic module, SM, IR
SFP-OC3-LR
SFP OC3 optic module, SM, LR
About Juniper Networks
Juniper Networks is in the business of network innovation. From
devices to data centers, from consumers to cloud providers,
Juniper Networks delivers the software, silicon and systems that
transform the experience and economics of networking. The
company serves customers and partners worldwide. Additional
information can be found at juniper.net.
For additional physical interface cards, please see
www.juniper.net/us/en/products-services/routing/m-series.
Corporate and Sales Headquarters
APAC Headquarters
EMEA Headquarters
Juniper Networks, Inc.
Juniper Networks (Hong Kong)
Juniper Networks Ireland
1194 North Mathilda Avenue
26/F, Cityplaza One
Airside Business Park
Sunnyvale, CA 94089 USA
1111 King’s Road
Swords, County Dublin, Ireland
Phone: 888.JUNIPER (888.586.4737)
Taikoo Shing, Hong Kong
Phone: 35.31.8903.600
or 408.745.2000
Phone: 852.2332.3636
EMEA Sales: 00800.4586.4737
Fax: 408.745.2100
Fax: 852.2574.7803
Fax: 35.31.8903.601
www.juniper.net
Copyright 2012 Juniper Networks, Inc. All rights reserved. Juniper Networks, the Juniper Networks logo, Junos,
NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other
countries. All other trademarks, service marks, registered marks, or registered service marks are the property of
their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper
Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
1100032-007-EN
8
Mar 2012
Printed on recycled paper
To purchase Juniper Networks solutions,
please contact your Juniper Networks
representative at 1-866-298-6428 or
authorized reseller.