Data Sheet
Cisco Catalyst 4500E Series Chassis
High Performance, Mobile and Secure User Experience
Overview
®
®
The Cisco Catalyst 4500 Series Switches enable borderless networks, providing high performance, mobile, and
secure user experience through Layer 2-4 switching investments. It enables security, mobility, application
performance, video, and energy savings over an infrastructure that supports resiliency, virtualization, and
automation. Cisco Catalyst 4500 Series Switches provide borderless performance, scalability, and services with
reduced total cost of ownership and superior investment protection.
Cisco Catalyst 4500 (Figure 1) has a centralized forwarding architecture that enables collaboration, virtualization,
and operational manageability through simplified operations. With forward and backward compatibility spanning
multiple generations, the new Cisco Catalyst 4500E Series provides exceptional investment protection and
deployment flexibility to meet the evolving needs of organizations of all sizes. The Cisco Catalyst 4500E Series
platform has 10 Gigabit Ethernet (GE) uplinks and supports PoEP, enabling the customers to future proof their
network.
E-Series chassis come in four different form factors: 3-slot (4503-E), 6-slot (4506-E), 7-slot (4507R+E/4507R-E), and
10-slot (4510R+E/4510R-E). 4503-E, 4506-E, 4507R+E, and 4510R+E chassis are extremely flexible and support
either 6 Gbps, 24 Gbps, or 48Gbps per line-card slot. 4507R-E and 4510R-E chassis are limited to 6 Gbps and 24
Gbps per line-card slot. Integrated resiliency in the Cisco Catalyst 4500E Series includes 1+1 supervisor engine
redundancy (10-slot and 7-slot only), redundant fans, software-based fault tolerance, and 1+1 power supply
redundancy. Integrated resiliency in both hardware and software minimizes network downtime, helping to ensure
workforce productivity, profitability, and customer success.
Figure 1.
Cisco Catalyst 4500E Series
The Cisco Catalyst 4500E Series extends control to the network edge with intelligent network services, including
sophisticated quality of service (QoS), predictable performance, advanced security, comprehensive management,
and integrated resiliency. Scalability of these intelligent network services is made possible with dedicated,
specialized resources known as ternary content-addressable memory (TCAM). Ample TCAM resources (up to
384,000 entries) enable “high feature capacity,” which provides wire-speed routing/switching performance
independent of provisioning of services such as QoS and security.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 12
Data Sheet
Cisco Catalyst 4500E Series Chassis
The Cisco Catalyst 4500E Series offers four chassis options and eight supervisor engine options (Table 1). It
provides a common architecture that can scale up to 388 ports. The Cisco Catalyst WS-C4507R+E, WS-C4510R+E,
WS-C4507R-E, and WS-C4510RE offer high availability by supporting 1+1 redundant supervisor engines with
subsecond failover time and full-image In-Service Software Upgrades (ISSUs). Nonstop forwarding with Stateful
Switchover (NSF/SSO) and ISSU help ensure continuous packet forwarding during supervisor engine switchover to
help ensure high availability for collaboration applications and voice over IP (VoIP). Using the same line cards as the
widely deployed Cisco Catalyst 4000 Series Switches and classic Cisco Catalyst 4500 Series Switches, the Cisco
Catalyst 4500E Series furthers Cisco’s commitment to affordable enterprise and branch scalability.
Table 1.
Cisco Catalyst 4500E Series Chassis Features
Feature
Cisco Catalyst
WS-C4503-E Chassis
Cisco Catalyst
WS-C4506-E Chassis
Cisco Catalyst
WS-C4507R+E Chassis
Cisco Catalyst
WS-C4510R+E Chassis
Total number of slots
3
6
7
10
Line-card slots
2
Supervisor engine slots
1
1
2
2
Dedicated supervisor
engine slot numbers
1
1
3 and 4
5 and 6
Supervisor engine
redundancy
No
No
Yes
Yes (Supervisor V-10GE, 6E and 7-E)
Supervisor engines
supported
Supervisor 7-E
Supervisor 7-E
Supervisor 7-E
Supervisor 7-E
Supervisor 6-E
Supervisor 6-E
Supervisor 6-E
Supervisor 6-E
Supervisor 6L-E
Supervisor 6L-E
Supervisor 6L-E
Supervisor V-10GE
Supervisor V-10GE
Supervisor V-10GE
Supervisor V-10GE
Bandwidth scalability per
line-card slot
Up to 48 Gbps on all slots
Up to 48 Gbps on all slots
Up to 48 Gbps on all slots
Up to 48 Gbps on all slots
Number of power supply
bays
2
2
2
2
AC input power
Yes
Yes
Yes
Yes
DC Input power
Yes
Yes
Yes
Yes
Integrated Power over
Ethernet
Yes
Yes
Yes
Yes
Minimum number of
power supplies
1
1
1
1
5
1
Power supplies supported
5
1
8
2
3
● 1000W AC
● 1400W AC
● 1300W ACV
● 1000W AC
● 1400W AC
● 1300W ACV
● 1000W AC
● 1400W AC
● 1300W ACV
● 1400W AC
● 2800W ACV
● 4200W ACV
● 2800W ACV
● 4200W ACV
● 6000W ACV
● 2800W ACV
● 4200W ACV
● 6000W ACV
● 2800W ACV
● 4200W ACV
● 6000W ACV
● 6000W ACV
● 1400W DC (triple input)
● 1400W-DC-P
● 1400W DC (triple input)
● 1400W-DC-P
● 1400W DC (triple input)
● 1400W-DC-P
● 1400W DC (triple input)
● 1400W-DC-P
Number of fan-tray bays
1
1
1
1
Location of 19-inch rack
mount
Front
Front
Front
Front
Location of 23-inch rack
mount
Front (option)
Front (option)
Front (option)
Front (option)
1
Slot 1 is reserved for supervisor engine only; slots 2 and higher are reserved for line cards.
Slots 3 and 4 are reserved for supervisor engines only in Cisco Catalyst 4507R-E and 4507R+E; slots 1-2 and 5-7 are reserved
for line cards.
3
Slots 5 and 6 are reserved for supervisor engines only in Cisco Catalyst 4510R-E and 4510R+E; slots 1-4 and 7-10 are reserved
for line cards.
2
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 12
Data Sheet
Configuration Alternatives
The Cisco Catalyst 4500 Series offers a powerful and flexible network solution that can be built with eight supervisor
engine alternatives. Each provides a high-performance, centralized, shared-memory switch fabric, protecting your
line-card investment by supporting the addition of optional higher layer engines (Table 2).
Table 2.
Cisco Catalyst 4500E Series Supervisor Engine Support
Feature
Cisco Catalyst 4500
Series Supervisor V-10GE
Cisco Catalyst 4500
Series Supervisor 6L-E
Cisco Catalyst 4500 Series
Supervisor 6-E
Cisco Catalyst 4500
Series Supervisor 7-E
Cisco Catalyst WS-C4503E Chassis
6Gbps/Slot
24Gbps/Slot
24Gbps/Slot
48Gbps/Slot
Cisco Catalyst WS-C4506E Chassis
6Gbps/Slot
24Gbps/Slot
24Gbps/Slot
48Gbps/Slot
Cisco Catalyst WSC4507R+E Chassis
6Gbps/Slot
24Gbps/Slot
24Gbps/Slot
48Gbps/Slot
Cisco Catalyst WSC4510R+E Chassis
6Gbps/Slot
Not supported
24Gbps/slot : Slots 1,2,3,4,7
48Gbps/Slot
Cisco Catalyst WSC4507R-E Chassis
6Gbps/Slot
24Gbps/Slot
Cisco Catalyst WSC4510R-E Chassis
6Gbps/Slot
Not supported
6Gbps/slot : Slots 8,9,10
24Gbps/Slot
24Gbps/slot
24Gbps/slot : Slots 1,2,3,4,7
24Gbps/slot
6Gbps/slot : Slots 8,9,10
The Cisco Catalyst 4500 Series has flexible interface types and port densities that allow network configurations to be
mixed and matched to meet the specific needs of campus networks (Table 3).
Table 3.
Cisco Catalyst 4500 Series Port Densities
Cisco Catalyst 4500 Series Switching Modules
Number of
Interfaces
Supported per
Line Card
Cisco Catalyst
4503-E
Cisco Catalyst
4506-E
Cisco Catalyst
4507R+E
Cisco Catalyst
4510R+E
Switched 10/100 Fast Ethernet (RJ-45)
48
96
240
240
384
Switched 10/100 Fast Ethernet (RJ-45) with IEEE
802.3af at Power over Ethernet (PoE/PoEP)
48
96
240
240
384
Switched 100 FX Fast Ethernet (MT-RJ)
48
96
240
240
384
Switched 1000BASE-X (fiber)
6, 18, or 48
104
244
244
388
Switched 10/100/1000BASE-T Gigabit Ethernet
48
108
240
240
384
Switched 10/100/1000BASE-T Gigabit Ethernet with
IEEE 802.3af at PoE/PoEP
48
108
240
240
384
Switched 10 Gigabit Ethernet
6 or 12
28
64
64
6
4
100
Configuration Flexibility and Modular Superiority
Cisco Catalyst 4500 Series line cards can be mixed and matched to suit numerous LAN access, server connectivity,
SMB, or branch-office deployments. The Cisco Catalyst 4500 Series supports the following line cards, listed in Table
4 by part number.
Table 4.
Cisco Catalyst 4500 Series Line Cards
Product Number
Description
Cisco Catalyst 4500E Series Line Cards
WS-X4748-RJ45V+E
Cisco Catalyst 4500E Series 48-Port 802.3at PoEP 10/100/1000 (RJ-45)
WS-X4712-SFP+E
Cisco Catalyst 4500E Series 12-port 10 Gigabit Ethernet (SFP+)
WS-X4624-SFP-E
Cisco Catalyst 4500E Series 24-port GE (SFP)
4
WS-C4507R-E and WS-C4510R-E chassis support up to 34 switched 10 Gigabit Ethernet ports.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 12
Data Sheet
Product Number
Description
WS-X4612-SFP-E
Cisco Catalyst 4500E Series 12-port GE (SFP)
WS-X4648-RJ45V-E
Cisco Catalyst 4500E Series 48-Port PoE 10/100/1000(RJ45)
WS-X4648-RJ45V+E
Cisco Catalyst 4500E Series 48-Port Premium PoE 10/100/1000(RJ45)
WS-X4606-X2-E
Cisco Catalyst 4500E Series 6-Port 10GE (X2)
WS-X4648-RJ45-E
Cisco Catalyst 4500E Series 48-Port Data 10/100/1000(RJ45)
Cisco Catalyst 4500 Classic 10/100 Line Cards
WS-X4148-RJ
Cisco Catalyst 4500 10/100 Auto Module, 48-Port (RJ-45)
WS-X4248-RJ45V
Cisco Catalyst 4500 PoE 802.3af 10/100, 48-Port (RJ-45)
Cisco Catalyst 4500 Classic 10/100/1000 Line Cards
WS-X4548-GB-RJ45
Cisco Catalyst 4500 Enhanced 48-Port 10/100/1000 Module (RJ-45)
WS-X4548-RJ45V+
Cisco Catalyst 4500 48-Port 802.3af PoE and 802.3at PoEP 10/100/1000 (RJ-45)
WS-X4548-GB-RJ45V
Cisco Catalyst 4500 PoE IEEE 802.3af 10/100/1000, 48 Ports (RJ-45)
Cisco Catalyst 4500 Classic 100 BASE-X FE Line Cards
WS-X4248-FE-SFP
Cisco Catalyst 4500 Fast Ethernet Switching Module, 48-Port 100BASE-X (SFP)
Cisco Catalyst 4500 Classic 1000 BASE-X GE Line Cards
WS-X4306-GB
Cisco Catalyst 4500 Gigabit Ethernet Module, 6 Ports (GBIC)
WS-X4506-GB-T
Cisco Catalyst 4500 6-Port 10/100/1000 RJ-45 PoE IEEE 802.3af and 1000BASE-X
(SFP)
WS-X4418-GB
Cisco Catalyst 4500 Gigabit Ethernet Module, Server Switching 18 Ports (GBIC)
WS-X4448-GB-SFP
Cisco Catalyst 4500 Gigabit Ethernet Module, 48 Ports 1000X (SFP)
Table 5 lists the minimum software requirements for the Cisco Catalyst 4500 supervisor engines.
Table 5.
Cisco Catalyst Supervisor Engine Software Minimum Requirements
Chassis
Supervisor Engine
Minimum Software Requirement
Cisco WS-C4503-E and WS-C4506-E
Supervisor Engine V-10GE
Cisco IOS Software Release 12.2(37)SG
Supervisor Engine 6-E
Cisco IOS Software Release 12.2(40)SG
Supervisor Engine 6L-E
Cisco IOS Software Release 12.2(52)SG
Supervisor Engine 7-E
Cisco IOS XE Software Release 3.0(1)SG
Supervisor Engine V-10GE
Cisco IOS Software Release 12.2(54)SG
Supervisor Engine 6-E
Cisco IOS Software Release 12.2(54)SG
Supervisor Engine 6L-E
Cisco IOS Software Release 12.2(54)SG
Supervisor Engine 7-E
Cisco IOS XE Software Release 3.0(1)SG
Supervisor Engine V-10GE
Cisco IOS Software Release 12.2(54)SG
Supervisor Engine 6-E
Cisco IOS Software Release 12.2(54)SG
Supervisor Engine 7-E
Cisco IOS XE Software Release 3.0(1)SG
Supervisor Engine V-10GE
Cisco IOS Software Release 12.2(40)SG
Supervisor Engine 6-E
Cisco IOS Software Release 12.2(40)SG
Supervisor Engine 6L-E
Cisco IOS Software Release 12.2(52)SG
Supervisor Engine 7-E
Cisco IOS XE Software Release 3.0(1)SG
Supervisor Engine V-10GE
Cisco IOS Software Release 12.2(40)SG
Supervisor Engine 6-E
Cisco IOS Software Release 12.2(40)SG
Supervisor Engine 7-E
Cisco IOS XE Software Release 3.0(1)SG
Cisco WS-C4507R+E
Cisco WS-C4510R+E
Cisco WS-C4507R-E
Cisco WS-C4510R-E
®
Managing the Catalyst 4500E Series Switch
Network Management applications are instrumental in lowering Operating Expenditures (OPEX) while improving
network availability by simplifying and automating many of the day-to-day tasks associated with managing an end-toend network.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 12
Data Sheet
Cisco Network Assistant
The Cisco Network Assistant application manages standalone devices from anywhere on your intranet. Using its
GUI, you can perform multiple configuration tasks without using command-line interface (CLI) commands. You can
apply actions to multiple devices and ports at the same time for VLAN and quality-of-service (QoS) settings,
inventory and statistics reports, link and device monitoring, software upgrades, and many other networking features.
Cisco Network Assistant simplifies device management by offering an intuitive GUI, alternative modes for configuring
network devices, two levels of access, and comprehensive online help. It features two modes of display: device view
and topology view. In the device view, the Cisco Catalyst 4500 Series administrator may configure the switch,
configure ports on the switch, or configure groups of ports. In the topology view, the administrator may configure
VLAN settings, configure EtherChannels, and view a variety of reports on system and network status.
CiscoWorks LAN Management Solution
CiscoWorks LAN Management Solution (LMS) is an integrated suite of management functionality that simplify the
configuration, administration, monitoring, and troubleshooting of Cisco Borderless Networks. Built upon popular
Internet-based standards, CiscoWorks LMS enables network operators to manage the network through a browserbased interface that can be accessed anytime from anywhere within the network. The user experience allows for
maximum flexibility and quick-and-easy access to management functions and tasks reducing complexity and errorprone tasks typically associated with managing a network. The breadth and depth of device support coupled with
“day-one” device support program ensures that the 4500E Series Switch and the latest Cisco platforms are
supported and manageable the day they ship.
Once installed, out-of-the-box monitoring and troubleshooting dashboards provide immediate results and actionable
information to quickly isolate and fix network problems before they are service impacting. Work centers provide a
single place where operators can quickly provision, monitor and manage new Cisco Catalyst 4500E Series Switch
TM
value-added network services such as: Cisco EnergyWise, Cisco TrustSec , and AutoSmart Ports.
Network Analysis Module
Cisco NAM 2200 series appliance provides comprehensive operational visibility into Cisco Catalyst 4500 Series
Switch deployments. It combines application performance visibility, traffic analysis and troubleshooting, to enable
network administrators to effectively manage delivery of converged network services. The visibility provided by NAM
allows IT to deliver consistent end-user experience and improve service levels. It also helps to optimize resources
with comprehensive analysis of traffic and effective use of intelligent network services such as QoS and Cisco
WAAS. In addition, Cisco NAM improves operational efficiency with proactive detection of performance issues and
accelerated problem isolation and root-cause analysis
Physical Specifications
Table 6 lists physical specifications.
Table 6.
Physical Specifications of Cisco Catalyst 4500 Series Chassis
Specification
WS-C4503-E
WS-C4506-E
WS-C4507R+E and WSC4507R-E
WS-C4510R+E and WSC4510R-E
Dimensions (H x W x D)
12.25 x 17.31 x 12.50 in.
(31.12 x 43.97 x 31.70 cm)
17.38 x 17.31 x 12.50 in.
(44.13 x 43.97 x 31.70 cm)
19.19 x 17.31 x 12.50 in.
(48.74 x 43.97 x 31.70 cm)
24.35 x 17.31 x 12.50 in.
(61.84 x 43.97 x 31.70 cm)
Rack units (RU)
7 RU
10 RU
11 RU
14 RU
Chassis weight (with fan
tray)
32.25 lb (14.63 kg)
40.50 lb (18.37 kg)
44.50 lb (20.19 kg)
54.50 lb (24.73 kg)
Mounting
19- and 23-in. rack
compatible (19-in. rack and
cable guide hardware
included)
19- and 23-in. rack
compatible (19-in. rack and
cable guide hardware
included)
19- and 23-in. rack
compatible (19-in. rack and
cable guide hardware
included)
19- and 23-in. rack
compatible (19-in. rack and
cable guide hardware
included)
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 12
Data Sheet
Power Supply Indicators and Interfaces
Tables 7 and 8 describe power supply indicators and interfaces:
●
Fan cooling: Integrated in hot-insertion/hot-extraction unit
●
Good: Green
●
Fail: Red (faulty)
●
SNMP MIB supported
Table 7.
Cisco Catalyst 4500E Series Power Supply Specifications (Data Only)
Power Supply
1000W AC
1400W AC
1400W DC Triple Input
Integrated PoE
No (data only)
No (data Only)
No (data only)
Input current (rated)
12A at 100 VAC, 5A at 240 VAC
16A at 100 VAC, 7A at 240 VAC
2x -48 VDC at 15A
1x -48 VDC at 12.5A
● 12V at 83.4A
● 3.3V at 12.2A
Output current (data)
● 12V at 113.4A
● 3.3V at 12.2A
● 12V at 1360W
● 3.3V at 40W
Output power redundant mode
(data)
1000W + 40W
1360W + 40W
1400W + 40W
Output power combined mode
(data)
1667W
2473W
-
Heat dissipation
943 Btus per hour
1048 Btus per hour
1048 Btus per hour
Holdup time
20 ms
20 ms
20 ms
Hot swappable
Yes
Yes
Yes
Table 8.
Cisco Catalyst 4500E Series Power Supply Specifications (Data and PoE)
Power Supply
1300W AC
2800W AC
4200W AC
6000 AC
1400W DC with
PEM
2500W AC Power Shelf
Integrated PoE
Yes (up to 800W)
Yes (up to 1400W)
Yes (up to 3855W)
Yes (up to 4800W)
Up to 7500W
(minus the power
consumed for data)
when connected
directly to a DC
power plant or 2
external AC power
shelves
2500W per power
supply; 5000W per
shelf (minus the
power consumed
for data)
IEEE 802.3af/at
compliant
PoE/PoEP
Yes
Yes
Yes
Yes
Yes
Yes
Input current
(rated)
Output current
(data)
Output current
(PoE)
● 16A at 100
VAC
● 7A at 240 VAC
● 12V at 84.7A
● 3.3V at 12.5A
-50V at 16.7A
16A at 200 VAC
● 12V at 113.3A
● 3.3V at 12.1A
-50V at 28A
Output power
redundant mode
(data)
1000W + 40W
1360W + 40W
Output power
redundant mode
(PoE)
800W maximum
per power supply
1400W maximum
per power supply
Output power
combined mode
(data)
1667W
2473W
● 2x 12A at
100VAC
● 2x 12A at
100VAC
Or
● 2x 12A at
200VAC
Or
● 2x 16A at
200VAC
● 12V at 115.3A
● 3.3V at 12.5A
● 12V at 186.9A
● 3.3V at 12.5A
-50V at 77.1A
(200V)
-50V at 100.0A
(200V)
-50V at 38A (100V)
-50V at 38.5A
(120V)
1383W + 40W
2200W + 40W
● 3700W (220V)
● 1850W (110V)
2766W
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
● 31A at -60 VDC 15A at 200 VAC
(data only)
● 180A at -48
VDC (PoE)
● 4800W (220V)
● 1850W (110V)
4400W
● 12V at 120A
● 3.3V at 10A
-52 VDC at 50A
(total output per
supply)
140A at -48/-60
VDC
-52 VDC at 50A
(total output per
supply)
1360W + 40W
Up to 1400W
(through DC
supply)
Up to 7500W
(minus the power
consumed for data)
2500W per supply
(minus the power
consumed for data)
-
-
Page 6 of 12
Data Sheet
Power Supply
1300W AC
2800W AC
4200W AC
6000 AC
1400W DC with
PEM
2500W AC Power Shelf
Output power
combined mode
(PoE)
1333W
2333W
6700W (220V)
8700W (220V)
3800W (100V)
-
3360W (110V)
3360W (110V)
Heat dissipation
1568 Btus per hour
3580 BTU/hr
2720 BTU/hr
Data only: 1591
Btus per hour
1210 Btus per
hour, per power
supply
2387 Btus per hour
Data and voice:
2905 Btus per hour
Holdup rime
20 ms
20 ms
20 ms
20 ms
4 ms
20 ms
Hot swappable
Yes
Yes
Yes
Yes
Yes
Yes
Additional notes for Table 7 and 8:
●
Output power is per power supply unless otherwise stated
●
Heat dissipation numbers represent the power-conversion losses of the power supply in operation
●
The number of power devices supported will depend on customer configuration
Fan Trays
Each Cisco Catalyst 4500E Series and classic Cisco Catalyst 4500 Series chassis uses a single fan tray for cooling.
All fan trays are composed of independent fans. If one fan fails, the system will continue to operate without a
significant degradation in cooling. The system will detect and notify the user (through LED, command-line interface
[CLI], and SNMP) that a fan has failed and the tray needs to be replaced. Cisco Catalyst 4500E Series fans cannot
be interchanged with classic Cisco Catalyst 4500 Series fans. The classic Cisco Catalyst 4500 Series chassis needs
an E-Series fan tray in order to support the Metro Supervisor Engine 6-E.
Fabric-Redundancy Modules (Cisco WS-C4507R+E, WS-C4510R+E, WS-C4507R-E, and WSC4510R-E Only)
The Cisco Catalyst 4500 and 4500E Series redundancy scheme uses removable fabric-redundancy modules on the
passive backplane to switch traffic to the active supervisor engine. There is one fabric-redundancy module per line
card. Fabric-redundancy modules and redundant clocks ship standard with every Cisco Catalyst 4507R+E, 4507R-E,
4510R+E, and 4510R-E chassis. Fabric-redundancy modules cannot be interchanged between the Cisco Catalyst
4507R+E/4510R+E and 4507R-E/4510R-E chassis.
Environmental Conditions
The Cisco Catalyst 4500 and 4500E Series require the following conditions:
●
Operating temperature: 32 to 104ºF (0 to 40ºC)
●
Storage temperature: -40 to 167ºF (-40 to 75ºC)
●
Relative humidity: 10 to 90 percent, noncondensing
●
Operating altitude: -60 to 2000 meters (m)
Regulatory Standards Compliance
Table 9 lists the regulatory standards compliance of the Cisco Catalyst 4500 and 4500E Series.
Table 9.
Regulatory Standards Compliance
Specification
Standard
Regulatory compliance
CE Marking
Safety
● UL 60950
● CAN/CSA-C22.2 No. 60950
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 12
Data Sheet
Specification
Standard
● EN 60950
● IEC 60950
● TS 001
● AS/NZS 3260
● FCC Part 15 (CFR 47) Class A
● ICES-003 Class A
EMC
● EN55022 Class A
● CISPR22 Class A
● AS/NZS 3548 Class A
● VCCI Class A
● EN 55022
● EN 55024
● EN 61000-6-1
● EN 50082-1
● EN 61000-3-2
● EN 61000-3-3
● ETS 300 386
● NEBS Level 3
● ETS 300 019 Storage Class 1.1
Industry EMC, safety, and
environmental standards
● ETS 300 019 Transportation Class 2.3
● ETS 300 019 Stationary Use Class 3.1
● ETS 300 386
● CTR 12/13
● CTR 4
Telecom (E1)
● ACA TS016
● FCC Part 68
● Canada CS-03
Telecom (T1)
● JATE Green Book
ROHS Compliance
ROHS5
Power and MTBF Information
Table 10 gives power and MTBF information for different chassis
Table 10.
Power and MTBF Info
Part Number
Max Rated Power (W)
Rated MTBF (Hours)
WS-C4503-E
60
1,064,279
WS-C4506-E
120
710,119
WS-C4507R+E
135
248,630
WS-C4510R+E
200
179,714
WS-C4507R-E
135
365,896
WS-C4510R-E
200
290,525
Note:
All power numbers shown in the table above are maximum values recommended for facility power and cooling
capacity planning. These figures are not indicative of the actual power draw during operation. Typical power draw is
about 20% lower than the maximum value shown.
Ordering Information
Table 11 lists the ordering information for chassis, power supplies, supervisor engines, and memory that are
commonly used with the Cisco Catalyst 4500 Series.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 8 of 12
Data Sheet
Table 11.
Ordering Information
Product Number
Description
WS-C4503-E
Cisco Catalyst E-Series 4503 switch (3-slot chassis), fan, no power supply
WS-C4506-E
Cisco Catalyst E-Series 4506 switch (6-slot chassis), fan, no power supply
WS-C4507R-E
Cisco Catalyst E-Series 4507R switch (7-slot chassis), fan, no power supply, redundant supervisor capable
WS-C4507R+E
Cisco Catalyst E-Series 4507R+E switch (7-slot chassis), fan, no power supply, redundant supervisor
capable
WS-C4510R-E
Cisco Catalyst E-Series 4510R switch (10-slot chassis), fan, no power supply; redundant supervisor
capable
WS-C4510R+E
Cisco Catalyst E-Series 4510R+E switch (10-slot chassis), fan, no power supply; redundant supervisor
capable
PWR-C45-1000AC
Cisco Catalyst 4500 Series 1000W AC power supply (data only)
PWR-C45-1400AC
Cisco Catalyst 4500 Series 1400W AC power supply (data only)
PWR-C45-1300ACV
Cisco Catalyst 4500 Series 1300W AC power supply (with integrated PoE)
PWR-C45-2800ACV
Cisco Catalyst 4500 Series 2800W AC power supply (with integrated PoE)
PWR-C45-4200ACV
Cisco Catalyst 4500 Series 4200W AC power supply (with integrated PoE)
PWR-C45-6000ACV
Cisco Catalyst 4500 Series 6000W AC power supply (with integrated PoE)
PWR-C45-1400DC-P
Cisco Catalyst 4500 Series 1400W DC power supply with integrated power entry module (PEM)
PWR-C45-1400DC
Cisco Catalyst 4500 Series triple input 1400W DC power supply (data only)
WS-P4502-1PSU
Cisco Catalyst 4500 Series auxiliary power shelf (2-slot), including 1 PWR-4502
PWR-4502
Cisco Catalyst 4500 Series auxiliary power-shelf redundant power supply
WS-X4013+
Cisco Catalyst 4500 Series Supervisor Engine II-Plus
WS-X4013+TS
Cisco Catalyst 4500 Series Supervisor Engine II-Plus-TS, twelve 10/100/1000 PoE (RJ-45) and eight 1000X SFP ports included on supervisor-engine faceplate
WS-X4013+10GE
Cisco Catalyst 4500 Series Supervisor Engine II-Plus-10GE
WS-X4515
Cisco Catalyst 4500 Supervisor Engine IV
WS-X4516
Cisco Catalyst 4000 and 4500 Supervisor Engine V
WS-X4516-10GE
Cisco Catalyst 4500 Series Supervisor Engine V-10GE
WS-X45-Sup6-E
Cisco Catalyst 4500 Series Supervisor Engine 6-E
WS-X45-Sup6L-E
Cisco Catalyst 4500 Series Supervisor Engine 6L-E
MEM-C4K-FLD64M
Compact Flash memory, 64-MB option
MEM-C4K-FLD128M
Compact Flash memory, 128-MB option
MEM-X45-512MB-E
Cisco Catalyst 4500 Series Supervisor Engine 6-E, 512-MB option
Warranty
Cisco Catalyst 4500E Series and Cisco Catalyst 4500 switches are covered by the Cisco limited lifetime hardware
warranty. For more information, visit http://www.cisco.com/en/US/docs/general/warranty/English/LH2DEN__.html.
Note:
If you purchased a Cisco Catalyst 4500 Series chassis before May 1, 2009, it is covered by the Cisco
90-day limited hardware warranty. For more information, visit
http://www.cisco.com/en/US/docs/general/warranty/English/901DEN__.html.
Cisco Technical Support Services
Cisco offers Cisco Technical Support Services to help ensure that your Cisco products operate efficiently, remain
highly available, and benefit from current system software to assist you in effectively managing your network service
while controlling operational costs.
Cisco Technical Support Services provide significant benefits that go beyond what is offered under the Cisco
warranty policy.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 9 of 12
Data Sheet
®
Services available under a Cisco SMARTnet service contract that are not covered under a warranty include the
following:
●
Latest software updates
●
Rapid replacement of hardware in next-day, 4-hour, or 2-hour dispatch options
●
Ongoing technical support through Cisco Technical Assistance Center (TAC)
●
Registered access to http://www.cisco.com
Tables 12 and 13 list the components and competitive differentiators of Cisco Technical Support Services.
Table 12.
Technical Support Services: Components
Service Feature Overview
Benefits
Software support
Offers maintenance and minor and major updates for licensed feature set. Downloading new maintenance
releases, patches, or updates of Cisco IOS Software helps to enhance and extend the useful life of Cisco
devices. Through major software updates it is possible to extend the life of equipment and maximize
application technology investments by:
● Increasing the performance of current functions
● Adding new capability that, in many cases, requires no additional hardware investment
● Enhancing network and application availability, reliability, and stability
®
TAC support
With more than 1000 highly trained customer support engineers, 390 CCIE certifications, and access to
13,000 research and development engineers, Cisco TAC complements your in-house staff with a high level
of knowledge in voice, video, and data communications networking technology. Its sophisticated callrouting system quickly routes calls to the correct technology personnel. The Cisco TAC is available 24
hours a day, 365 days a year.
Cisco.com
This award-winning website provides 24-hour access to an extensive collection of online product and
technology information, interactive network-management and troubleshooting tools, and knowledgetransfer resources that can help customers reduce costs by increasing staff self-sufficiency and
productivity.
Advance hardware replacement
Advance replacement and onsite field-engineer options supply fast access to replacement hardware and
field resources for installing hardware, minimizing the risk of potential network downtime.
Table 13.
Technical Support Services: Competitive Differentiators
Feature
Benefits
Worldwide Virtual Lab
● TAC training
This extensive lab of Cisco equipment and Cisco IOS Software releases provides an invaluable
engineering resource and knowledge base for training, product information, and recreation and testing of
selected network issues to help decrease time to resolution.
● Boot camps
● Tech calls
Tech forums
Cisco is committed to providing customers the latest in technology support. These TAC training programs
assist customers in case avoidance as well as provide knowledge transfer of Cisco networking expertise.
Cisco Live
A powerful suite of Internet-enabled tools with firewall-friendly features; these secure, encrypted Java
applets can turn a simple phone call into an interactive collaboration session, allowing a customer and
Cisco TAC support engineer to work together more effectively.
Global logistics
Delivers award-winning, worldwide hardware-replacement support with 650 depots, covering 120 countries,
at a US$2.3 billion investment in inventory, using 10,000 onsite field engineers.
Cisco IOS Software
Employs 100 discrete technologies with more than 2000 features. 400 new features are added each year.
Cisco IOS Software is installed in more than 10 million devices and is running on more than 10,000
networks worldwide. It operates on the world’s largest IPv6 and VoIP networks and in all major service
provider networks worldwide.
For More Information
To learn more about how you can take advantage of Cisco Technical Support Services, talk to your Cisco
representative or visit Cisco Technical Support Services at
http://www.cisco.com/en/US/products/svcs/ps3034/ps2827/serv_category_home.html.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 10 of 12
Data Sheet
For additional information about the Cisco Catalyst 4500 Series, visit http://www.cisco.com/go/catalyst4500.
For additional information about Cisco products, contact:
●
United States and Canada: 800 553-NETS (6387)
●
Europe: 32 2 778 4242
●
Australia: 612 9935 4107
●
Other: 408 526-7209
●
http://www.cisco.com
Cisco and Partner Services for Next-Generation Cisco Catalyst Modular Switches
Enable the borderless network architecture using personalized services from Cisco and our partners. Through a
discovery process that begins with understanding your business objectives, we help you integrate the nextgeneration Cisco Catalyst modular switches into your architecture and incorporate network services onto that
platform. Sharing knowledge and leading practices, we support your success every step of the way as you deploy,
absorb, manage, and scale new technology. Choose from a flexible suite of support services designed to meet your
business needs and help you maintain high-quality network performance while controlling operational costs.
For more information about services from Cisco and our partners, visit http://www.cisco.com/go/services.
Table 14 lists available technical services.
Table 14.
Available Technical Services
Technical Services
®
Cisco SMARTnet Service
● Around-the-clock, global access to the Cisco Technical Assistance Center (TAC)
● Unrestricted access to the extensive Cisco.com knowledge base and tools
● Next-business-day, 8x5x4, 24x7x4, and 24x7x2 advance hardware replacement and onsite parts replacement and installation available5
● Ongoing operating system software updates within the licensed feature set6
● Proactive diagnostics and real-time alerts on Smart Call Home enabled devices
Cisco Smart Foundation Service
● Next business day advance hardware replacement as available
● Business hours access to SMB TAC (access levels vary by region)
● Access to Cisco.com SMB knowledge base
● Online technical resources through Smart Foundation Portal
● Operating system software bug fixes and patches
Cisco SP Base Service
● Around-the-clock, global access to the Cisco TAC
● Registered access to Cisco.com
● Next business day, 8x5x4, 24x7x4, and 24x7x2 advance hardware replacement. Return to factory option available7
● Ongoing operating system software updates8
● Available direct from Cisco only to qualified service providers
5
Advance hardware replacement is available in various service-level combinations. For example, 8x5xNBD indicates that shipment
will be initiated during the standard 8-hour business day, 5 days a week (the generally accepted business days within the relevant
region), with next business day (NBD) delivery. Where NBD is not available, same day ship is provided. Restrictions apply; please
review the appropriate service descriptions for details.
6
Cisco operating system updates include the following: maintenance releases, minor updates, and major updates within the
licensed feature set.
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 11 of 12
Data Sheet
Printed in USA
© 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-436089-11
02/11
Page 12 of 12