In-Vehicle Mounting Solutions | Docking Stations | Install Services
www.firstmobiletechnologies.com
w
1.800.330.5399
1
contact
JUMP to Table of Contents
tollfree
800.330.5399
phone 610.828.1492
fax
610.828.1195
email
fmt.info@firstgroup.com
address
1013 Conshohocken Road, Suite 312
Conshohocken, PA 19428-0978
www.firstmobiletechnologies.com
w
1.800.330.5399
2
table of contents
(click on a section below to jump to that page)
contact information
2
mobile system: at a glance
installation services
4
docks and cradles
6-15
for Panasonic
for Dell
for universal use
5
6-7
8-15
16
tilt/swivel
17-18
top plate
19
poles
20
quality story 21
dedicated base mount selection
22-23
dedicated base mounts
24-35
universal base mounts
36-38
accessories
screen holders
39-43
policies
44
warranty
44
company history
45
console units
Pentax printer mounts
power supplies
www.firstmobiletechnologies.com
w
39
40-41
42
43
1.800.330.5399
3
First Mobile Technologies’ products are interchangeable
and allow you to build a solution that best fits your needs.
JUMP to Table of Contents
A basic system consists of the following items:
FirstDock™ or FirstCradle™
FirstCradle™ is a secure device that locks your
computer in place.
Two kinds of cradles exist:
dedicated |cradle designed exclusively for a particular model
universal |cradle designed to secure and fit any
computer
FirstDock™ secures your computer into place,
while also providing inputs, or connectors for your
computer peripheral devices, such as a scanner, bar
code reader, keyboard, mouse, printer, etc.
all FirstDocks are dedicated
tilt/swivel
Attaches to the end of the top plate, allowing the
computer to pivot and tilt and position the keyboard
for user comfort.
top plate
Inserts into the top of the pole, providing a mounting
surface for a docking station or cradle. Additionally,
top plates allow the docking station to be moved side
to side for easier user access.
pole
Provides the necessary height for the mounting
system. Standard pole lengths are 9” and 14”. Poles
are made with sturdy 12-gauge poles and 7-gauge
steel plates for bolting to the base.
base
Uses 7- to 11- gauge powder-coated steel—the
most durable in the industry. The base secures the
mounting solution to the vehicle.
Two kinds of bases exist:
dedicated | designed exclusively for a specific vehicle
universal | designed to mount to any flat surface, such
as the vehicle floor or console box
Most bases can be installed without drilling, using existing seat bolt patterns
www.firstmobiletechnologies.com
w
1.800.330.5399
4
Installation Services
JUMP to Table of Contents
First Mobile Technologies’
nationwide installation service
enables us to install your solution
whenever and wherever you need it.
With the experience of more than
50,000 installations, First Mobile
Technologies has developed a level
of process and installation expertise
that is unmatched. In fact, we are
the only mobile technology company
that offers a comprehensive range of
services.
project management
Installation projects can be complex and time-sensitive. As such, we offer
dedicated resources to manage projects from conception to completion to
ensure your fleet is returned to service as quickly as possible.
safety
We don’t “tap in” to existing power sources that are used to power your critical
systems. We use separate and distinct wiring to power your mobile solution.
It’s safer for the operation of your equipment and safer for you.
preassembly
Unlike our competitors, we can pre-assemble our mounting equipment so it
ships out to your location ready to go. This ensures the installation process
moved quickly and flawlessly.
train the trainer
We are happy to provide training services to enable your personnel to offer
installation training throughout your organization.
nationwide coverage
We can deploy our installation teams to your location, or we can coordinate an
install at one of our facilities.
www.firstmobiletechnologies.com
w
1.800.330.5399
5
Docks and Cradles
[for Panasonic™]
CF-30 Toughbook FirstDock™
also compatible with CF-18 Panasonic Toughbook
Part # FM-D-CF19
also compatible with CF-29 Panasonic Toughbook
Part # FM-D-CF30
JUMP to Table of Contents
CF-19 Toughbook FirstDock™
Panasonic dock features
Durable Design
Engineered and tested to a military standard
(MIL-STD-810F), the benchmark for vibration
and crash resistance certification
Full Port Replication
One simple connection provides access to 13
expansion ports including: VGA, DVI, S-Video,
Parallel, Serial, PS/2 (Mouse and Keyboard),
S/PDIF, USB 2.0 (x4), RJ-11, and RJ-45. RF
pass-thrus optional
Dock plate is made with 11-gauge steel
to withstand the toughest environment and
aesthetic powder-coated finish to hide finger
prints and scratches
Power/Charge Capabilities
While docked, the laptop will be powered and
will charge the internal battery
Closes Completely
Laptop lid closes completely while docked
Key Lock System
Engages and secures the computer to the First
Mobile Technologies docking station. Dedicated
undock button and indicator provides quick, safe
undocking
DC/DC power supply
Exclusively for in-vehicle use
Screen holder
Ensures computer screen remains in a fixed
position
Lock and easy release feature
Accessories
FMT offers a wide range of docking accessories
to complete your mobile technology
requirements. Includes a variety of in-vehicle
docking elements (power/charge options,
consoles, mounting hardware and other support
elements)
Tilt-Swivel device
Vertically and horizontally rotates computer for
optimal positioning
Warranty
3-Year Standard Warranty on FMT In-Vehicle
docks
[ Steel Dock Plate (page 7) is
required for all Panasonic FirstDocks ]
www.firstmobiletechnologies.com
w
1.800.330.5399
6
Docks and Cradles
[for Panasonic™]
Part # FM-DT-CF52
JUMP to Table of Contents
CF-52 Toughbook First Mobile™ Docking Tray
Full Port Replication
Designed for use with the Panasonic Port
Replicator (required), which can also be
purchased through your FMT salesperson
(Part #CF-VEB522M), the CF-52 Docking
Tray provides full access to USB connectors
(4), DisplayPort, RJ-45, serial, AC jack, power
button, cable lock slot, and slide release.
Warranty
3-Year Standard Warranty on all metal parts
Key Lock System
for theft prevention, added stability & security
CF-30 Toughbook FirstCradle™
Part # FM-C-CF30
Made with 11-gauge steel
for vibration resistance and safety and nonglare surface finish for maximum in-vehicle
usability
Full access to Toughbook functionality
including all ports, card slots and drive bays
CF-19 Toughbook FirstCradle™
also compatible with CF-18 Panasonic Toughbook
Part # FM-C-CF19
front
Non-Glare Surface Finish
Ultra-strong, 11-gauge steel is powder-coated for minimal
glare and maximum durability
Rear Key Lock System prevents theft while safely holding
the Panasonic CF-18 Toughbook in place
A Secure Fit for both CF-18 and CF-19 Toughbooks
rear
Steel Dock Plate
Sits below the Panasonic Port Replicator for the most
rugged support; required for all Panasonic FirstDocks.
Computer
Part #
CF 19
FM-DP-19
CF 28 / CF 29 FM-DP-07
CF 30
www.firstmobiletechnologies.com
w
1.800.330.5399
FM-DP-07-2
7
Docks and Cradles
[for Dell™]
JUMP to Table of Contents
E6400 | E6410 | E6400ATG | E6410ATG Notebook FirstDock™
Part # FM-D-E6400
or # FM-D-E6400-W/PS
Durable and Functional Design
The new E-ATG FirstDock custom docking station includes the same dynamic features of the E-XFR model
(see page 8 for more details), however the E-ATG is not RF Pass Thru-compatible.
Internal Power Supply Option available for all Dell-dedicated E-Series FirstDocks (part # FM-D-XFR-E-W/PS
and #FM-D-E6400-W/PS)
Screen Holder (not pictured) included with all Dell E-Series FirstDock and FirstCradle XFR models.
[New Safe-Release “Undock
and Go”™ Mechanism]
When the key is turned and the
release button pressed, two
recessed, cushioned ejector pads
raise simultaneously on either
side of the connection, gently
releasing the computer from the
E-Series FirstDock. The computer
remains on and active.
[Dell™ E/Port Station
Functionality]
Both XFR and ATG FirstDocks
use one simple connection
that provides access to 15
expansion ports (including
1 front, 3 side, and 2 rear USB
ports).
Options and Accessories
FMT offers a wide range of docking accessories to complete your mobile technology requirements.
Power options include the Hardwired DC power supply for the Dell Latitude E-Series (FM-PWR-DLH-E)
or the Cigarette plug DC power supply for the Dell Latitude E-Series (FM-PWR-DLC-E).
www.firstmobiletechnologies.com
w
1.800.330.5399
9
Docks and Cradles
[for Dell™]
Part # FM-CP-ATG-E
JUMP to Table of Contents
E6400 | E6410 | E6400ATG | E6410ATG Notebook FirstCradlePlus™
[scratch resistant clamps]
to protect and secure the
computer. Clamps come
in four different sizes (and
colors) to fit the E6400 or
E6400ATG, either with or
without a port replicator.
[non-glare surface finish]
for maximum in-vehicle
usability
[made with heavy-gauge metal]
for vibration resistance and
safety.
[key lock system]
Engages and secures
the Dell Notebook to the
FirstCradlePlus for increased
safety and security.
Expandable to suit your needs
The new FirstCradlePlus for the Dell E6400, E6410, E6400ATG, and E6410ATG can function alone as a
cradle, and by adding the Dell E-Series Standard (or Advanced) Port Replicator, you gain the features of a
full vehicle docking station.
Durable Design: Tested to military standard (MIL-STD 810F) and Standard of Automotive Engineers (SAE
J1455) – the ultimate benchmark for vibration and crash resistance certification.
Optional Screen Holder available for added safety and stability
Key lock for increased security
Powder-coated finish protects from sun glare, smudges and scratches
Optimal footprint provides maximum user space
Computer closes completely in locked position
Quality construction: made of heavy-gauge metal to withstand the toughest environments
Warranty: Full 3-Year Warranty on all metal products.
www.firstmobiletechnologies.com
w
1.800.330.5399
10
Docks and Cradles
[for Dell™]
JUMP to Table of Contents
E6400 | E6410 | E6400ATG | E6410ATG Notebook FirstCradlePlus™
(Pictured below with the Dell Advanced Port
Replicator, sold separately by Dell.
The FirstCradlePlus is also compatible with the Dell
Standard Port Replicator, also sold separately by Dell.)
[Optional Dell Advanced
Port Replicator]
Attaches to the
FirstCradlePlus to add the
connectivity and features of
a full vehicle docking station (sold separately by Dell).
[optional accessories]
Hardwired DC Power Supply
for Dell Latitude E-Series
Part # FM-PWR-DLH-E
First Mobile Technologies doesn’t
“tap-in” to existing power sources
that are used to power your critical
systems. We use separate and
distinct wiring to power your mobile
solution. It’s safer for the operation
of your equipment and safer for you.
Cigarette Plug DC Power
Supply for Dell Latitude
E-Series
Brackets for Dell E-Series Advanced Port Replicator
Part # FM-PWR-DLC-E
While the Dell Standard Port
Replicator needs no additional
hardware, First Mobile Technologies
can provide the additional
brackets necessary to utilize Dell’s
Advanced Port Replicator with the
FirstCradlePlus.
Part # FM-CP-EXT-TABS
This optional accessory allows the
user to utilize the vehicle’s power
supply to run the laptop without the
need for hardwiring.
www.firstmobiletechnologies.com
w
1.800.330.5399
11
Docks and Cradles
[for Dell™]
JUMP to Table of Contents
FirstDock™ for the Latitude™ XT2 XFR Tablet
Part #’s: FM-D-XFR-XT2
FM-D-XFR-XT2-RF
Built-in 8x DVD±RW Drive that reads and writes to CDs and DVDs
Option to add 3 RF (antenna) Pass Thru’s for the functionality you require (Part # FM-D-XT2-XFR-RF)
vailable ports include a serial connector, audio connector, 4 USB 2.0 (2 rear, 1 side, and 1 front)
A
connectors, an AC adapter, VGA connector, DVI connector, eSATA connector, RJ-45 network connector,
and a 1394 (firewire) connector
Durable design tested to military standard (MIL-STD 810F) and Standard of Automotive Engineers
(SAE J1455) – the ultimate benchmark for vibration and crash resistance certification.
Key lock for increased security
Aesthetic powder-coated finish protects from smudges and scratches
Optimal footprint provides maximum user space
[Triple RF Pass-Thru Option]
Connects Wireless WAN, GPS,
and Wireless LAN antennas
[in-dock DVD±RW drive]
reads and writes to CDs and
DVDs
[conveniently placed USB
ports]
One front, one side, and
two rear USB connectors
allow easy access when
connecting perepherials to
your FirstDock XT2 XFR
www.firstmobiletechnologies.com
[key lock system]
Deters theft by securing
the XT2 XFR Tablet to the
FirstDock
w
1.800.330.5399
12
Docks and Cradles
[for Dell™]
JUMP to Table of Contents
E6400XFR Notebook FirstCradle™
Part # FM-C-XFR-E
[optimal footprint]
Custom designed for
the Dell Latitude E6400
XFR Notebook to provide
maximum in-vehicle user
space
[key lock system]
Deters theft by securing
the XFR Notebook to the
FirstCradle, and allows for
easy placement and removal
of computer
[scratch resistant clamps]
to protect and secure the
computer while driving.
Rugged Design for a Ruggedized Computer: Tested to military standard (MIL-STD 810F) and Standard
of Automotive Engineers (SAE J1455) – the ultimate benchmark for vibration and crash resistance
certification.
Equipped with screen holder for added stability (included free with all Dell E-Series FirstDock and
FirstCradle XFR models)
Key lock for increased security
Powder-coated finish protects from sun glare, smudges and scratches
Computer closes completely in locked position
Quality construction: made of heavy-gauge metal to withstand the toughest environments
Warranty: Full 3-Year Warranty on all metal products
www.firstmobiletechnologies.com
w
1.800.330.5399
13
Docks and Cradles
[for Dell™]
D620 | D630 | ATG Notebook FirstDock™
Part # FM-D-XFR
Part # FM-D-D620
JUMP to Table of Contents
D630 XFR™ Notebook FirstDock™
Features RF Pass-Thru (FM-D-XFR-RF Dock Only)
Provides external (vehicle mounted) antenna connection
capabilities (TNC) for XFR notebooks with integrated WiFi
(802.11) and/or Broadband radios (Only available for the
Latitude XFR D630)
Rugged Design
Engineered and tested to a military standard
(MIL-STD-810F), the benchmark for vibration and crash
resistance certification
“Undock and Go”™ Feature
For easy transition from dock/undock status – Notebook
remains on and active
Key Lock System
Engages and secures the Dell notebook to the First Mobile
Technologies docking station. Dedicated undock button and
indicator provides quick, safe undocking
Closes Completely
Laptop LCD closes completely while docked
Tilt-Swivel device
Vertically and horizontally rotates computer for optimal
positioning
[Dell™ D/Port Station Functionality]
One simple connection provides access
to 13 expansion ports including:
VGA, DVI, S-Video
Parallel, Serial
PS/2 (Mouse and Keyboard)
S/PDIF
USB 2.0 (x3)
RJ-11, and RJ-45
Non-glare surface finish for maximum in-vehicle usability
Scratch resistant clamps for touch points with computer
Made with 16-gauge steel for vibration resistance and
safety
Warranty
1-Year Standard Warranty on FMT In-Vehicle Docks.
Optional 2- to 3-Year Warranty available.
Accessories
FMT offers a wide range of docking accessories to
complete your solution, including a variety of in-vehicle
docking elements (power/charge options, consoles,
mounting hardware and other support elements)
www.firstmobiletechnologies.com
w
1.800.330.5399
14
Docks and Cradles
[for Dell™]
JUMP to Table of Contents
D620 | D630 | ATG Notebook FirstCradle™
Part # FM-C-D620
[scratch resistant clamps]
for touch points with computer
[non-glare surface finish]
for maximum in-vehicle
usability
[made with 16-gauge steel]
for vibration resistance and
safety.
Closes Completely Laptop lid closes completely while docked.
[key lock system]
Engages and secures the Dell
Notebook to the First Mobile
Technologies docking station.
Dedicated undock button and
indicator provides quick, safe
undocking
[screen holder]
Part # FM-SC
ensures computer screen
remains in a fixed position
[allows full access to all existing computer ports]
www.firstmobiletechnologies.com
w
1.800.330.5399
15
Docks and Cradles
[for Universal use]
JUMP to Table of Contents
New FirstCradle™ Universal
Part # FM-C-UNIV2
One Size Fits All
Small enough to fit a 9.25” Netbook, for secure and affordable
in-vehicle computing. Expands to over 15.5” to securely hold almost
any size notebook computer on the market
[back view]
Steel Housing, 0.078-inch thick, to
withstand the toughest environment.
Innovative locking mechanism
(patent pending) that locks the sliding
tray in any position to securely hold
computers of varying widths.
Six Adjustable Touch-Points allow
variable bracket height and position to secure your computer in the safest possible position
Provides full access to computer functionality such as ports, card slots, and drive bays on most computers
Warranty
Full 3-year warranty on all metal components
[optional accessories]
Screenholder
Mini Brackets
Part # FM-SC-UNIV2
Part # FM-BKT-UNIV2
Designed for
use with smaller
notebook or netbook
computers, these
rear mini brackets
replace the standard,
full-sized brackets
in the rear of the
FirstCradle Universal
for a safer, more
secure fit.
Attaches to the side
of the FirstCradle
Universal to
securely hold the
laptop screen in
virtually any open
position.
www.firstmobiletechnologies.com
w
1.800.330.5399
16
Tilt / Swivel
Part #
Length
FM-TS-S
9.5”
FM-TS-L
10.5”
JUMP to Table of Contents
Attaches to the end of the top plate, allowing the
computer and dock to pivot and tilt for optimal
positioning and user comfort with positive lock
feature and 0-80° of tilt and 360° of swivel. Extra
long handle for ease of use available in the
FM-TS-L.
[tilt/swivel accessories]
Base Plate
Base plate mounts onto a vertical surface or
console box. Made of 11-gauge powder-coated
steel, the base plate supports the tilt/swivel and
docking station instead of a standard vehicle base
mount
Part #
FM-TSB
Bracket
Bracket allows for rotation and extension of
docking station when the base plate is used
instead of a standard vehicle base mount.
Part #
Length
FM-BKT-X
7-3/4”
FM-BKT-X15
9”
FM-BKT-X40
12”
www.firstmobiletechnologies.com
w
1.800.330.5399
17
Tilt / Swivel
Spacer Block
JUMP to Table of Contents
[tilt/swivel accessories - continued]
Spacer Block is designed to be used between
existing mounting equipment and tilt swivel to add
1.5” of additional height
Part #
FM-SPBLK
Universal Mounting Plate Adapter
The Universal Mounting Plate Adapter is
designed to attach any FirstDock or FirstCradle to
a competitor’s mounting equipment. Comes with
instructions and examples of various competitors’
mounting patterns for easy installation.
Part #
FM-UNIV-ADPT
Isolator Plate
The Isolator Plate is used between the universal
docking tray and a tilt-swivel device to isolate shock
and vibration. This unit is designed to be used with
all Dell E-Series FirstDocks and FirstCradles, and
is also compatible with most other FMT docking
solutions.
Part #
FM-ISO-E-DOCK
www.firstmobiletechnologies.com
w
1.800.330.5399
18
Top Plates
6” Top Plate
JUMP to Table of Contents
Top plates provide vertical and horizontal movement to allow the user to
move the laptop between the driver and passenger.
Six-inch Top Plate is designed for insertion into
pole assembly
Part #
FM-TOP-06
9” Top Plate
Nine-inch Top Plate features a swing arm. Set
collar keeps the tube adjusted to the correct height
while rotational adjustments are made
Part #
FM-TOP-09
Twelve-inch Top Plate features a swing arm. Set
collar keeps the tube adjusted to the correct height
while rotational adjustments are made. A Twelveinch Top Plate Slide is also available, which slides
open to extend the Top Plate to a full 16”.
12” Top Plate
Part #’s
Standard: FM-TOP-12M (pictured at right)
Slide: FM-TOP-12S (not pictured)
12” Articulating Arm Top Plate
Articulating Arm Top Plates feature a two
piece design that allows for greater flexibility in
positioning. In addition to the 12-inch version
pictured at right, a 16-inch Articulating Arm Top
Plate is also available.
Part #’s
12-inch: FM-TOP-AARM (pictured at right)
16-inch: FM-TOP-AARM-16 (not pictured)
www.firstmobiletechnologies.com
w
1.800.330.5399
19
Poles
[for Universal use]
JUMP to Table of Contents
Poles attach to the various base mounts and set the height of the overall mount configuration.
Poles are made with sturdy 12-gauge poles and 7-gauge steel plates for bolting to the base.
Pole Bottom
Part #
Length
FM-P-05
5”
FM-P-09
9”
FM-P-14
14”
Pole bottom attaches to vehicle base mount
Rack-to-Post Mount
Part #
FM-RP
Rack-to-Post Mount attaches modems or other
equipment to the base of any pole
[poles come in 5”, 9” and 14” lengths
and can be cut down to size]
www.firstmobiletechnologies.com
w
1.800.330.5399
20
[our quality story]
JUMP to Table of Contents
“
First Mobile Technologies is a quality company that services
its customer in a timely manner.
They go
out of their way to meet customer needs
and provide a high quality product.
”
Mel Bauernfeind
Baltimore County Electric Services
“
The quality of First Mobile hardware
and experience
and skill of their professional installers is an integral
part of the solutions we offer to the emergency responder
marketplace.
John Fix, President
”
Iron Compass Map Company
www.firstmobiletechnologies.com
w
1.800.330.5399
21
Base Mounts
JUMP to Table of Contents
First Mobile Technologies has more dedicated
base mounts than anyone in the industry.
To identify the base mount that works best with your vehicle, locate the make | model | year of your
vehicle and read across to the corresponding part number. If your vehicle is not listed, or you need
to mount to a boat, forklift, or other vehicle application, call your First Mobile Technologies sales
representative to help you find a mobile solution that best fits your needs.
Make
Model
Year
Bucket or Bench Drill
seating
Required
Passenger
Seat Mount
Part Number
Chevrolet/ GMC
Blazer S-10 Series
1994-2002
Bucket
1994-2002
Bucket
CK-1500-CK3500
2000-2007
Both
Silverado/Sierra
2007-newer
[new body style]
Both
FM-B-BLZ
x
YES
FM-B-CK2
FM-B-CK3
Bucket
Colorado/Canyon
FM-BP-BLZ
x
FM-BP-10
All model years
Both
FM-COL-H
All model years
Both
x
FM-COL-S
Envoy/Trailblazer
2001-newer
Both
x
FM-B-ENV
Impala
2000-2005
2006-newer
Bucket
Both
x
x
FM-BP-IMP
FM-B-IMP2
Suburban/Tahoe/
Yukon
2001-2006
Both
2001-newer
Bucket
Topkick
2003-newer
Both
YES
FM-B-52
Vans-Astro
1998-newer
Bucket
YES
FM-B-52
Vans-Fullsize
1998-newer
2004-newer
Bucket
Bucket
YES
Avenger
2008-newer
Bucket
x
FM-BAVENGER
Caravan
2008-newer
Bucket
x
FM-BCARAVAN
Charger/ Magnum/
300
2005-newer
Bucket
FM-B-CHGR
Dakota
2000-newer
Bucket
FM-B-DUR
Durango
2000-2003
Bucket
FM-B-DUR
2004-newer
Bucket
FM-B-DUR2
YES
YES
FM-B-CK2
x
x
FM-BP-TAH
FM-B-52
FM-B-58
Dodge/ Chrysler
www.firstmobiletechnologies.com
w
1.800.330.5399
22
Base Mounts
Make
Model
Year
Bucket or Bench Drill
seating
Required
Passenger
Seat Mount
Part Number
JUMP to Table of Contents
Dodge/ Chrysler (continued)
Ram
2003-newer
Both
2003-2004
Bucket
2005-newer
Bucket
FM-B-RM4W2
Bucket
FM-B-Sprinter
Sprinter
FM-B-RM3
YES
FM-B-RM4W
Ford
Crown Victoria
All model years
Both
All model years
Bucket
Escape
2005-newer
Bucket
FM-B-ESC
Excursion
2000-newer
Bucket
FM-B-EXC
Expedition
2000-2002
Both
FM-B-EXPD2
2003-newer
Bucket
FM-B-EXPD3
1999-newer
Both
FM-B-RAN2
2001-older
Both
2002-newer
Both
FM-B-EXPL2
2001-2003
Both
FM-B-FS2
2004-newer
Both
2004-newer
Both
FM-B-FS-H
2000-newer
Both
FM-B-FSD-H
2000-newer
Bucket
1999-newer
Both
Explorer
F-Series F150
F Series (SD)
Ranger
FM-B-CV
x
x
x
x
FM-BP-12
FM-B-EXPLS
FM-B-FS-S
FM-B-EXC
FM-B-RAN2
All years
Bucket
x
Vans: Aerostar
Freestar
1998-newer
Bucket
Vans: Econoline Series
2002-newer
Bucket
x
FM-B-54
Vans: Transit Connect
2010-newer
Bucket
x
FM-BP-TRA NSIT
Freightliner
2009-newer
Not Applicable
Cherokee
1997-newer
Bucket
x
FM-B-JEEP
Grand Cherokee
1998-2005
Bucket
x
FM-B-CHER
2006-newer
Bucket
x
FM-B-CHER2
Liberty
All model years
Bucket
x
FM-BP-12
Highlander
2007-newer
Bucket
x
FM-BHIGHLANDER
YES
FM-B-EXPLS
FM-B-52
Freightliner
YES
FM-B-FR8-M2
Jeep
Toyota
www.firstmobiletechnologies.com
w
1.800.330.5399
23
Dedicated Base Mounts
[for Chevrolet/GMC]
JUMP to Table of Contents
Blazer S-10 Series
Hump Mount
Part #
Bucket/
Bench
Drilling
Required
Pole
Required
Top Plate
Required
FM-B-BLZ
Bucket
No
5” or 9”
6”, 9” or 12”
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Bucket
No
included
6”, 9” or 12”
Passenger Side Base and Pole Mount
Part #
FM-BP-BLZ
Canyon/Colorado
Hump Mount
Part #
FM-COL-H
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
No
5”, 9” or 14”
6”, 9” or 12”
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
No
5”, 9” or 14”
6”, 9” or 12”
Side Base Mount
Part #
FM-COL-S
www.firstmobiletechnologies.com
w
1.800.330.5399
24
Dedicated Base Mounts
[for Chevrolet/GMC]
JUMP to Table of Contents
CK1500-CK3500
Hump Mount
Part #
FM-B-CK2
Bucket/ Bench
Drilling
Required
Both
Yes
Pole
Required
Top Plate
Required
5”, 9” or 14” 6”, 9” or 12”
Silverado/Sierra
Hump Mount
Part #
FM-B-CK3
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
No
5” or 9”
6”, 9” or 12”
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Bucket
No
9” or 14”
6”, 9” or 12”
Pole
Required
Top Plate
Required
Passenger Seat Mount
Part #
FM-BP-10
Envoy/ Trailblazer
Base Mount
Part #
FM-B-ENV
Bucket/ Bench
Drilling
Required
Both
No
www.firstmobiletechnologies.com
w
5”, 9” or 14” 6”, 9” or 12”
1.800.330.5399
25
Dedicated Base Mounts
[for Chevrolet/GMC]
JUMP to Table of Contents
Impala
Passenger Side Base and Pole Mount
Part #
FM-B-IMP
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
No
5”, 9” or 14”
6”, 9” or 12”
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
Yes
5”, 9” or 14”
6”, 9” or 12”
Passenger Side Base and Pole Mount
Part #
FM-B-IMP2
Suburban/Tahoe
Hump Mount
Part #
FM-B-CK2
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
Yes
5”, 9” or 14”
6”, 9” or 12”
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
Yes
Hump Mount
Part #
FM-B-CK3
www.firstmobiletechnologies.com
w
5”, 9” or 14” 6”, 9” or 12”
1.800.330.5399
26
Dedicated Base Mounts
[for Chevrolet/GMC]
JUMP to Table of Contents
Suburban/Tahoe
Passenger Side Base and Pole Mount
Part #
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Bucket
No
included
6”, 9” or 12”
FM-BP-TAH
Topkick/ Vans: Astro and Fullsize
Flat floor Base and Pole Mount
Part #
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
Yes
included
6”, 9” or 12”
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Bucket
No
included
6”, 9” or 12”
FM-B-52
Passenger Seat Base Mount
Part #
FM-B-58
[for Dodge]
Avenger
Passenger Side Base Mount
Part #
Bucket/
Bench
Drilling
Required
Pole
Required
Top Plate
Required
FM-B-AVENGER
Bucket
No
5” or 9”
6”, 9” or 12”
www.firstmobiletechnologies.com
w
1.800.330.5399
27
Dedicated Base Mounts
[for Dodge]
JUMP to Table of Contents
Caravan
Side Base Mount
Part #
Bucket/
Bench
Drilling
Required
Pole
Required
Top Plate
Required
FM-B-CARAVAN
Bucket
No
5”, 9” or 14”
6”, 9” or 12”
Charger/Magnum/300
Side Base Mount
Part #
Bucket/
Bench
Drilling
Required
Pole
Required
Top Plate
Required
FM-B-CHGR
Bucket
No
5”, 9” or 14”
6”, 9” or 12”
Pole
Required
Top Plate
Required
Dakota/Durango
Side Base Mount
Part #
Bucket/
Bench
Drilling
Required
FM-B-DUR
Bucket
No
5”, 9” or 14” 6”, 9” or 12”
Durango
Side Base Mount
Part #
FM-B-DUR2
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Bucket
No
5”, 9” or 14”
6”, 9” or 12”
www.firstmobiletechnologies.com
w
1.800.330.5399
28
Dedicated Base Mounts
[for Dodge]
JUMP to Table of Contents
Ram
Base Mount
Part #
FM-B-RM3
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
No
5”, 9” or 14”
6”, 9” or 12”
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Bench
Yes
5”, 9” or 14”
6”, 9” or 12”
Base Mount
Part #
FM-B-RM4W
Base Mount
Part #
FM-BP-RM4W2
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Bucket
No
5”, 9” or 14”
6”, 9” or
12”
Sprinter
Passenger Seat Mount
Part #
FM-B-SPRINTER
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Bucket
No
5” or 9”
6”, 9” or 12”
[for Ford]
Crown Victoria
Hump Mount
Part #
FM-B-CV
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
No
5”, 9” or 14”
6”, 9” or 12”
www.firstmobiletechnologies.com
w
1.800.330.5399
29
Dedicated Base Mounts
[for Ford]
JUMP to Table of Contents
Crown Victoria
Base and Pole Passenger Side Mount
Part #
FM-BP-12
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Bucket
No
included
6”, 9” or 12”
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Bucket
No
5” or 9”
6” or 9”
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Bucket
No
5”, 9” or 14”
6”, 9” or 12”
Escape
Passenger Side Seat Mount
Part #
FM-B-ESC
Excursion
Passenger Side Base Mount
Part #
FM-B-EXC
Expedition
Side Mount
Part #
FM-B-EXPD2
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
No
5”, 9” or 14”
6”, 9” or 12”
www.firstmobiletechnologies.com
w
1.800.330.5399
30
Dedicated Base Mounts
[for Ford]
JUMP to Table of Contents
Expedition
Side Mount
Part #
FM-B-EXPD3
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Bucket
No
5”, 9” or 14”
6”, 9” or 12”
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
No
5”, 9” or 14”
6”, 9” or 12”
Pole
Required
Top Plate
Required
Explorer/ Ranger
Hump Mount
Part #
FM-BP-RAN2
Side Mount
Part #
FM-B-EXPLS
Bucket/ Bench
Drilling
Required
Bucket
No
5”, 9” or 14” 6”, 9” or 12”
Side Mount
Part #
FM-B-EXPL2
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Bucket
No
5”, 9” or 14”
6”, 9” or 12”
www.firstmobiletechnologies.com
w
1.800.330.5399
31
Dedicated Base Mounts
[for Ford]
JUMP to Table of Contents
F-Series F150
Side Base Mount
Part #
FM-B-FS2
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
No
5”, 9” or 14”
6”, 9” or 12”
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Bucket
No
5”, 9” or 14”
6”, 9” or 12”
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
No
5”, 9” or 14”
6”, 9” or 12”
Side Base Mount
Part #
FM-B-FS-S
Hump Mount
Part #
FM-B-FS-H
F-Series F250/ 350/ 450
Hump Mount
Part #
FM-B-FSD-H
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
No
5”, 9” or 14”
6”, 9” or 12”
www.firstmobiletechnologies.com
w
1.800.330.5399
32
Dedicated Base Mounts
[for Ford]
JUMP to Table of Contents
F-Series F250/ 350/ 450
Side Mount
Part #
FM-B-EXC
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Bucket
No
5”, 9” or 14”
6”, 9” or 12”
Pole
Required
Top Plate
Required
Ranger
Hump Mount
Part #
Bucket/ Bench
Drilling
Required
Both
No
Part #
Bucket/
Bench
Drilling
Required
Pole
Required
Top Plate
Required
FM-B-EXPLS
Bucket
No
5”, 9” or 14”
6”, 9” or 12”
FM-BP-RAN2
5”, 9” or 14” 6”, 9” or 12”
Side Mount
Vans: Aerostar, Freestar
Flat Floor Base and Pole Mount
Part #
FM-B-52
Bucket/
Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both*
Yes
included
6”, 9” or 12”
www.firstmobiletechnologies.com
w
1.800.330.5399
33
Dedicated Base Mounts
[for Ford]
Vans: Econoline Series
JUMP to Table of Contents
Flat Floor Base and Pole Mount
Part #
Bucket/
Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
Yes
included
6”, 9” or 12”
Part #
Bucket/
Bench
Drilling
Required
Pole
Required
Top Plate
Required
FM-BP-TRANSIT
Bucket
No
included
6”, 9” or 12”
FM-B-54
Vans: Transit Connect
Base and Pole Passenger Side Mount
[for Freightliner]
Freightliner
Side Base Mount
Part #
FM-B-FR8-M2
Bucket/
Bench
Drilling
Required
Pole
Required
Top Plate
Required
N/A
Yes
9”, 12” or 14”
6”, 9” or 12”
Pole
Required
Top Plate
Required
[for Jeep]
Cherokee
Side Base Mount
Part #
Bucket/
Bench
Drilling
Required
FM-B-JEEP
Bucket
No
www.firstmobiletechnologies.com
w
5”, 9” or 14” 6”, 9” or 12”
1.800.330.5399
34
Dedicated Base Mounts
[for Jeep]
JUMP to Table of Contents
Grand Cherokee
Side Base Mount
Part #
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
No
5”, 9” or 14”
6”, 9” or 12”
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Bucket
No
5”, 9” or 14”
6”, 9” or 12”
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Bucket
No
FM-B-CHER
Side Base Mount
Part #
FM-B-CHER2
Liberty
Base and Pole Side Mount
Part #
FM-BP-12
12” included 6”, 9” or 12”
[for Toyota]
Highlander
Side Base Mount
Part #
Bucket/
Bench
Drilling
Required
FM-B-HIGHLANDER
Bucket
No
www.firstmobiletechnologies.com
w
Pole
Required
Top Plate
Required
5”, 9” or 14” 6”, 9” or 12”
1.800.330.5399
35
Universal Base Mounts
Flat Floor Base and Pole Mount
JUMP to Table of Contents
Flat Floor Base and Pole Mount is designed for vehicles with
high seats, such as vans, trucks and fire engines. Also available
with a 36” post.
Part #
FM-B-52
Bucket/
Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both*
Yes
included
6”, 9” or 12”
[Support Accessories for Universal Base Mounts]
Quick Removal Mounting Base
The Quick Removal Mounting Base for the
FM-B-52 allows for quick removal of equipment.
Can be used as base of any pole, but specifically
designed for the FM-B-52.
Part #
FM-BQ-52
Floor Support Bracket
Floor Support Bracket for the FM-B-52 adds
structural support when mounting equipment in
larger vehicles.
Part #
FM-BKT-52
Support Tube
Support Tube stabilizes the mount in high vibration
areas. For use with any pole mount.
Part #
FM-SUPRT-52
Voltage Protection Unit Steel Cover
Voltage Protection Unit Steel Cover protects the
power supply that feeds into the docking system.
Part #
FM-P-COV
www.firstmobiletechnologies.com
w
1.800.330.5399
36
Universal Base Mounts
Passenger Base Mount
JUMP to Table of Contents
Passenger Base Mount allows equipment to be
mounted close to the vehicle hump.
Part #
FM-B-69
Bucket/ Bench
Drilling
Required
Both
Yes
Pole
Required
Top Plate
Required
5”, 9” or 14” 6”, 9” or 12”
Wall Base Mount
Wall Base Mount allows equipment to be mounted to vertical
surfaces or the sides of large vehicles such as trucks or vans,
while providing added support.
Part #
FM-PW-13
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
Yes
included
6”, 9” or 12”
Adjustable Seat Mount
Adjustable Seat Mount fastens into the passenger seat using
safety seat belt for security. It provides a platform for the tilt/
swivel. Portable and lightweight, it can be easily installed and
removed.
Part #
FM-SEATADJ
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
No
5”, 9” or 14”
6”, 9” or 12”
Quick Removal Base Mount
Quick Removal Base Mount allows for quick removal of
equipment and can be used as the base of any pole.
Part #
FM-BQ-P
Bucket/ Bench
Drilling
Required
Pole
Required
Top Plate
Required
Both
Yes
Any
NA
www.firstmobiletechnologies.com
w
1.800.330.5399
37
Universal Base Mounts
JUMP to Table of Contents
Vertical Surface Base Mount
Vertical Surface Base Mount is designed for the sides and
vertical surfaces where space is limited, or to existing console
areas.
Part #
FM-B-08
Bucket/ Bench
Drilling
Pole
Required Required
NA
Yes
Included
Top Plate
Required
6”, 9” or 12”
Horizontal Surface Base Mount
Horizontal Surface Base Mount is designed to be mounted
where space is limited, such as desktops, buses and fire engines.
Part #
FM-B-56
Bucket/ Bench
Drilling
Pole
Required Required
NA
Yes
Top Plate
Required
No
No
Floor Support Bracket
Floor Support Bracket for the FM-B-56 and the
FM-B-08 adds structural support when mounting
equipment to larger vehicles.
Part #
FM-BKT-56
www.firstmobiletechnologies.com
w
1.800.330.5399
38
Accessories
[screen holders]
JUMP to Table of Contents
Screen holders add ease to your mobile computing
by securing your screen in place.
Available for the following computers:
•
•
•
•
•
Panasonic CF-29, CF-30, & CF-52
Dell 620/ 630/ ATG
Dell D-XFR
Dell E6400 Series
Dell Latitude XT2 XFR
An adjustable screen holder is available for all other computer models.
www.firstmobiletechnologies.com
w
1.800.330.5399
39
Accessories
[console units]
JUMP to Table of Contents
Console Box Universal Base Plate
Console Box Universal Base Plate provides a platform for
mounting brackets, poles and console boxes. It is designed so
wiring can be fed from underneath for convenience. It is also
threaded for easy pole assembly.
Part #
FM-B-PLATE
Leg Kits
Leg kits are for use with the Console Box Universal Base Plate
[FM-B-Plate]. and attach to seat bolts. No drilling is required for
most vehicle models.
Vehicle models
Part #
Suburban | Tahoe
FM-L-CK2
Silverado | Sierra
FM-L-CK3
Crown Victoria
FM-L-CV
Durango [‘00-’03]
FM-L-DUR
Durango [‘04-newer]
FM-L-DUR2
Expedition | F-Series [‘00-’02]
FM--EXPD2
Expedition | F Series [‘03-newer]
FM-L-EXPD3
Impala [‘00-’05]
FM-L-IMP
Impala [06-newer]
FM-L-IMP2
Adjustable Cup Holder
Adjustable Cup Holders can be mounted to the console box or
base mounts.
Part #
FM-CUP2
www.firstmobiletechnologies.com
w
1.800.330.5399
40
Accessories
[console units]
JUMP to Table of Contents
Console Box
Console Box is 14” of inside box space for communications
equipment. Made of 14-gauge powder-coated steel.
Complete with faceplates and filler panels.
Part #
FM-MC-14
Console Box Accessories
Snapfit™ Faceplates
Filler Panel
Snapfit™ Faceplates are used with the
console box. These panels cover the
spaces on the sides of the radio unit when
stored in the console box, providing a
finished look. Available in several lengths.
Filler Panels fill spaces between
radio and switch units while providing
a finished appearance. Available in
several sizes from 1/2 “ to 4”.
Part #
FM-F-1.50
Part #
FM-FP-1.50
Armrests
The Adjustable Armrest mounts directly to the console
box and comes in 2” wide and 4” wide
Part #
FM-ARMEXT
The Armrest mounts directly to the console box.
Part #
FM-ARM-C
www.firstmobiletechnologies.com
w
1.800.330.5399
41
Accessories
[Pentax printer mounting hardware]
JUMP to Table of Contents
Pentax Printer Mount
Pentax Printer Mount is designed for use with any
Pentax Pocket Jet series mobile printer. Fast-release
design for fast printer docking and undocking to allow
for use either in or out of vehicle. Use with roll paper.
Optional Pentax Roll Holder (FM-PTX-ROL) available.
Part #
FM--PTX-CMB
Pentax Armrest Mount
Pentax Armrest Mount attaches to the pole and
houses both the Pentax printer and a roll of paper. The
padded arm rest lid opens to provide access to printer
and paper. Entire unit flips up and back 90 degrees,
similar to vehicle factory armrests. Includes a pole for
mounting to the floor or base plate.
Part #
Pole length
FM--PTX-ARM
FM-PTX-SH
9”
5”
Steel Dash Mount
Steel Dash Mount is designed for use with any
Pentax Pocket Jet series mobile printer. Dash mount
for the Crown Victoria only.
Part #
FM--PTX-DSH
www.firstmobiletechnologies.com
w
1.800.330.5399
42
Accessories
[power supplies]
Direct to Battery Wiring Kit
JUMP to Table of Contents
Part #: FM-WIRPK
Direct to Battery Wiring Kit comes in a neat,
professional package that is designed to ease
connectivity and cut the installation time. Complete with
15 feet of vinyl-covered 12-gauge wire, the kit features
a locking disconnection plug and a waterproof ATC 25amp fuse holder. A heavy-duty 50-amp version is also
available (FM-WIRPK50).
Power Supply Bracket
The Power Supply Bracket is designed to
secure both hardwire and cigarette power
supplies for both Dell and Panasonic computers
(see below) to the vehicle’s interior. The open
design allows airflow while securely holding the
power supply in place.
Part #: FM-BKT-PWR
Cigarette Lighter Power Supply
[for Dell]
[for Panasonic]
D-Series Part # FM-PWR-DLC
E-Series Part # FM-PWR-DLC-E
XT2 XFR Tablet: Part # FM-PWR-XT2
Part # FM-PWR-PAC
Hardwire Connection Power Supply
[for Dell]
[for Panasonic]
Part # FM-PWR-PAH
D-Series Part # FM-PWR-DLH
E-Series Part # FM-PWR-DLH-E
XT2 XFR Tablet: Part # FM-PWR-XT2-HW
www.firstmobiletechnologies.com
w
1.800.330.5399
43
WARRANTY STATEMENT
Partnership Services
First Mobile Technologies warrants to the original purchaser
of our products that at the time of purchase our products
will perform to its specific ratings and will be free from
defects in materials and workmanship under normal use.
The warranty period shall begin at the time of delivery.
First Mobile Technologies warrants its vehicle mounting
equipment for five years. Docking stations and electrical
parts are warranted for one year only. First Mobile
Technologies will repair or replace, without charge, any
of our products that fail due to defects in material or
workmanship. This is the original purchaser’s exclusive
remedy under First Mobile Technologies’ warranty.
As the leading provider of integrated turn-key hardware
solutions, First Mobile Technologies maintains strategic
partnerships and alliances with many Fortune 500
companies to offer the highest quality equipment at
the lowest prices. Additional offerings include antennas,
modems, wireless components, computers, racks, lights,
sirens, and more. Please contact your sales representative
or contact us at 1.800.330.5399 for a complete listing.
Together, we move you seamlessly through all phases of
wireless integration and provide you with a total solution.
Terms of Sale
First Mobile Technologies will provide adequate
consideration for an open account to all customers
with approved credit. Standard credit terms are net
30. Credit will remain solely at the discretion of First
Mobile Technologies. To request a credit application,
please contact 1.800.330.5399 or fax a request to
1.610.828.1195.
Product may additionally be purchased with Visa,
MasterCard, America Express, cash-in-advance, or
C.O.D.
Pricing
Prices, specifications, and products are subject to change
without notice. Possession of a price list does not guarantee
pricing or product availability. First Mobile Technologies
reserves the right to discontinue or modify products at
anytime.
Shipping
All prices are F.O.B. factory. Freight is prepared and will
be shipped in the most economic and safe method unless
otherwise stated. Partial shipments will be made unless
otherwise agreed upon by the purchaser. Approximate
shipping costs can be provided at time of order.
Return Authorization
First Mobile Technologies must be contacted and a
Returned Authorization provided prior to submitting any
product or goods. The Return Authorization number must
be clearly identified on the outside of the package. The
return of products that were a result of customer ordering
error will be subjected to a 20% restocking fee. Customer
is responsible for all return shipping charges. Unauthorized
returns will be refused.
JUMP to Table of Contents
POLICIES
This warranty does not apply to: failure due to damage,
misuse or abuse (such as excessive force, improper
installations, or application of power in excess of specific
ratings). This warranty also does not apply to: damages
resulting from (i) accident, neglect, negligence, vandalism, fire,
riot, war, or Acts of God; (ii) structural or other modification
or alteration without prior express written authorization
from First Mobile Technologies; (iii) repair or attempted
repair by unauthorized persons; (iv) replacement of original
components with substitutes without prior written authorization
from First Mobile Technologies; (v) failure to perform routine
preventative maintenance as customarily accepted within
the industry; or (vi) exposure to corrosives, containments,
chemicals, salt or atmospheric or environmental conditions.
OTHER THAN THE WARRANTIES SET FORTH ABOVE, FIRST
MOBILE TECHNOLOGIES EXPRESSLY DISCLAIMS ALL
OTHER WARRANTIES, EXPRESSED, IMPLIED OR STATUTORY,
INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY, WARRANTY OF FITNESS FOR ANY
PARTICULAR PURPOSE, WARRANTY BY DESCRIPTION OR
SAMPLE, OR ANY WARRANTY ARISING BY USAGE OF TRADE,
COURSE OF DEALING, OR COURSE OF PERFORMANCE. NO
AGENT OR EMPLOYEE OF FIRST MOBILE TECHNOLOGIES
OR ANY OTHER PERSON IS AUTHORIZED TO ALTER OR
ENLARGE THESE WARRANTIES, EXTEND ADDITIONAL
WARRANTIES OR AMEND THE DISCLAIMERS SET FORTH
HEREIN ON BEHALF OF FIRST MOBILE TECHNOLOGIES.
FIRST MOBILE TECHNOLOGIES’ LIABILITY UNDER THIS
LIMITED WARRANTY DOES NOT EXTEND TO LOSS OF
TIME, INCONVENIENCE, LOSS OF USE OF A VEHICLE (OR
LOSS OF PROFITS RESULTING THEREFROM); INJURY TO
PROPERTY OR PERSONS, OR ANY OTHER SPECIAL, INDIRECT,
CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER.
All claims under this Warranty must be submitted in writing to First Mobile
Technologies within the warranty period as stated herein.
www.firstmobiletechnologies.com
w
1.800.330.5399
44
JUMP to Table of Contents
Our History
Founded in 1994, First Mobile Technologies provides full turnkey
hardware solutions for integrating mobile computers, mounting equipment
and communication systems into environments requiring rugged
technology.
We are uniquely positioned to serve the public safety, utility,
transportation, government, military, healthcare, manufacturing, industrial,
oil and gas, and marine markets–in addition to many others.
As part of a $10+ billion organization, First Mobile Technologies has
the support of strong financial and management resources to provide
the latest mobile technology and equipment installations in a customerfocused environment.
First Mobile Technologies specializes in a full range of mobile and
mounting hardware products that includes non-rugged and rugged mobile
computers, docking stations, mount systems, communication equipment,
antennas, cable, power distribution centers, proprietary voltage protection
units (patent pending) and much more.
We are proud to be the only turnkey mobile computer hardware company
in the industry that manages the entire process from designing and
manufacturing customized hardware solutions to providing wiring and
complete installation services.
In serving your needs, our turnkey approach allows for a seamless
integration of not only the mobile computer solutions, but also the
complete vehicle upfit package–making First Mobile Technologies
unmatched in the industry.
www.firstmobiletechnologies.com
w
1.800.330.5399
45