KAARDC Ni-MH Rechargeable Battery
Effective: April 23, 2009
50.0+/-0.5
1.2 min
14.2+/-0.3
4.7+0/-1.0
Dimensions are in millimeters and include label.
System: Nickel-Metal Hydride battery
Designation: ANSI 1.2H3, IEC HR6
Nominal Voltage: 1.2 Volts
Nominal Capacity: 2600 mAh
Minimum Capacity: 2500 mAh
Charging Condition:
260 mA for 16h
Max. Discharge: 4.8 A Continuous to 1.0 V
7.2 A Intermittent
Temperature Ranges:
Operating Storage
Charging Approx. 0°C to +50°C
-20°C to +30°C
0°C to +40°C
Weight: 28.0 grams
Terminals: Flat Contacts
Jacket:
PVC Label
Internal Impedance: 0.020 Ohms (typical)
Charging Cycles: Up to 400
Maximum life is achieved by shallow discharge and charge conditions.
Note:
1) No added Mercury / 99.9999% Mercury Free — 2) No added Lead /99.999% Lead Free
3) No added Cadmium / 99.9999% Cadmium Free —4) No added PFOS (Perfluorooctane sulfonates)
5) This battery complies with ANSI C18, IEC 60086, and EU Directive 2006/66/EC, 2006/122/EC
6) Batteries are NOT subject to European RoHS regulations
7) MSDS sheets are available on the Kodak website.
8) Operating at extreme temperature will significantly affect service and cycle life
9) For best performance after a long period of non-use, charge and discharge the battery several times
The Data in this publication represents product tested under the conditions specified. They
do not represent standards or specifications which must be met by Eastman Kodak Company.
Company reserves the right to change and improve product characteristics at any time.
For more information, contact Eastman Kodak Company, 343 State Street, Rochester NY
14650-0811, Phone 1-800-242-2424
www.kodak.com/go/batteries
© Eastman Kodak Company, 2009
Kodak is a trademark.
KAARDC-2600