Juniper JXU-16GE-TX-S network switch module

DATASHEET
ETHERNET UNIVERSAL
PHYSICAL INTERFACE
MODULES
Product Overview
The Ethernet Universal Physical
Interface Modules offer high densities
of 10/100/1000 copper Ethernet or
fiber Gigabit Ethernet ports. These
ports offer the rich set of Layer 2–7
services available via Juniper Networks
Product Description
Juniper Networks® Ethernet Universal Physical Interface Modules (UPIMs) are a set of
interface modules shared between the Juniper Networks SSG Series Secure Services
Gateways including the SSG140, SSG320M, SSG350M, SSG520, SSG550M, and the
Juniper Networks J Series Services Routers including the J2320, J2350, J4350, and J6350.
These modules implement the full set of Layer 3–7 services offered in ScreenOS and
Juniper Networks Junos® operating system, and alternatively implement Layer 2 Ethernet
switching for connecting local servers and PCs to the network.
ScreenOS software on the Juniper
Four UPIM models are available:
Networks SSG Series Secure Services
• 1-port 100/1000 Ethernet with a small form-factor pluggable transceiver (SFP) slot.
Gateways, or Junos operating system on
the Juniper Networks J Series Services
Routers.
You choose from a variety of SFPs to implement 100 Mbps or 1 Gbps Ethernet.
• 6-port Gigabit Ethernet with SFP slots. You choose from a wide variety of SFPs to
implement different types of fiber optic or copper interfaces. The SFPs are sold
separately from the module.
• 8-port 10/100/1000 copper Ethernet.
• 16-port 10/100/1000 copper Ethernet. This module is double the height of the standard
PIM, so it requires two vertically adjacent PIM slots in the chassis.
Architecture and Key Components
The Ethernet UPIMs are highly flexible interfaces that give the network designer the tools
to solve a wide variety of networking problems.
Metro Ethernet WAN Links
The 1-port 100/1000 Ethernet SFP interface is ideal for connecting to a Metro Ethernet
service with a variety of fiber-optic SFPs. This interface allows you to deploy 100 Mbps
service today and upgrade to 1 Gbps simply by replacing the SFP.
Network Segmentation
The Ethernet UPIMs can be used to subnet or segment network traffic by configuring
each Ethernet port as a separate routed network or subnet. This localizes broadcast and
multicast traffic to a local segment and allows different security policies to be applied to
each subnet.
1
Security Zones
Local Workgroups
Many organizations need to improve internal security and keep
The network designer can use the Ethernet switching capability
critical information private within departments. At the same time,
of the Ethernet UPIMs to create local workgroups. Integrating
they need to provide guest access and protect local resources. The
Layer 2 switching into the SSG Series or J Series saves space
Ethernet UPIMs give the network designer the extra Ethernet ports
and simplifies management by using a single user interface to
necessary to implement security zones for departmental access.
configure the switch and the SSG Series or J Series router.
6-PORT GIGABIT
ETHERNET
8-PORT 10/100/1000
COPPER ETHERNET
16-PORT 10/100/1000 COPPER
ETHERNET
1-PORT 100/1000 SFP GIGABIT
ETHERNET
Features and Benefits
Table 1: Ethernet UPIM Features and Benefits
FEATURE
FEATURE DESCRIPTION
BENEFIT
8- or 16-port copper Ethernet and 1- or
6-port SFP gigabit ethernet modules
Provides Gigabit Ethernet connectivity
Provides current or new infrastructure in the local
site and ports for future expansion
Fits in PIM or enhanced PIM slots
UPIMs for use in regular PIM or enhanced PIM highspeed slots
Increases performance in the enhanced PIM slots
in the SSG500 line and J4350/J6350, while also
providing connectivity and functionality in all PIM
slots in all supported platforms
High-density Ethernet connectivity
Provides additional Ethernet ports in security/
routing devices
Increases deployment flexibility and cost
effectiveness for branch and midrange routing
and/or security platforms
Local switching
Provides switching and broadcast across ports
in the card (software release and configuration
dependent)
Integrates switching into high-performance
branch office and midrange secure routing
platforms to reduce operational costs and
consolidate the number of networking devices in
the branch office or regional site
Flexible for various applications, including multiport
copper or fiber applications
Product Options
The list of available SFP modules for the Gigabit Ethernet with SFP slots is shown in the “Ordering Information” section.
Table 2: Supported Platforms
PART NUMBER
SSG140, SSG320M, SSG350M,
SSG520M, SSG550M
J2320, J2350, J4350, J6350
JXU-1SFP-S
Yes
Yes
JXU-6GE-SFP-S
Yes
Yes
JXU-8GE-TX-S
Yes
Yes
JXU-16GE-TX-S
Yes
Yes
2
Specifications
Table 3: Specifications
1-PORT ETHERNET UPIM (JXU1SFP-S)
6-PORT ETHERNET UPIM (JXU6GE-SFP-S)
8-PORT ETHERNET UPIM (JXU-8GETX-S)
16-PORT ETHERNET UPIM (JXU16GE-TX-S)
Connector
1 SFP cage (SFP sold
separately)
6 SFP cages (SFPs sold
separately)
8 RJ-45
16 RJ-45
Medium-dependent
interface
(MDI/MDI-X)
N/A
N/A
Auto-correcting
MDI/MDI-X
Auto-correcting
MDI/MDI-X
Ethernet speeds
100 Mbps or 1 Gbps
1 Gbps
10/100/1000 Mbps,
autosensing
10/100/1000 Mbps,
autosensing
Duplex
Auto-negotiation or
manual setting for duplex
Auto-negotiation or manual
setting for duplex
Auto-negotiation or
manual setting for duplex
Auto-negotiation or manual
setting for duplex
PIM slots required*
One PIM or enhanced
PIM slot
One PIM or enhanced
PIM slot
One PIM or enhanced
PIM slot
Double-height PIM requires
two vertically adjacent PIM or
enhanced PIM slots
LEDs
Link and activity
Link and activity
Link and activity
Link and activity
Dimensions
(W x H x D)
5.45 x 0.63 x 6.5 in
(13.8 x 1.6 x 16.5 cm)
5.45 x 0.63 x 6.5 in
(13.8 x 1.6 x 16.5 cm)
5.45 x 0.63 x 6.5 in
(13.8 x 1.6 x 16.5 cm)
6.4 x 1.2 x 7.8 in
(16.2 x 3 x 19.7 cm)
Weight
8.6 oz (245 g)
8.2 oz (230 g)
8.6 oz (245 g)
11.6 oz (330 g)
Note: *Enhanced PIM slot is recommended for higher performance.
Environmental
Ordering Information
• Operating temperature: 32° to 104° F (0 to 40° C)
• Storage temperature: -40° to 158° F (-40 to 70° C)
• Relative humidity: 5% to 90% noncondensing
UPIM Part Numbers
Safety
• CAN/CSA-C22.2 No.60950/UL 60950 Third Edition, Safety of
Information Technology Equipment
• EN 60950 (2000) Third Edition—Safety of Information
Technology Equipment
EMC
•
•
•
•
FCC Part 15 Class A
EN 55022 Class A
AS/NZS 3548 Class A
VCCI Class A
Immunity
•
•
•
•
•
EN-61000-4-2 Electrostatic Discharge (ESD)
EN-61000-4-3 Radiated Immunity
EN-61000-4-4 EFT
EN-61000-4-5 Surge
EN-61000-4-6 Low Frequency Common Immunity
Juniper Networks Services and Support
Juniper Networks is the leader in performance-enabling services
and support, which are designed to accelerate, extend, and
optimize your high-performance network. Our services allow
PART NUMBER
DESCRIPTION
JXU-1SFP-S
1-port SFP 100 Mbps or Gigabit Ethernet
Universal PIM (SFP sold separately)
JXU-6GE-SFP-S
6-port SFP Gigabit Ethernet Universal PIM (SFPs
sold separately)
JXU-8GE-TX-S
8-port Gigabit Ethernet 10/100/1000 Copper
Universal PIM
JXU-16GE-TX-S
16-port Gigabit Ethernet 10/100/1000 Copper
Universal PIM
SFP Modules for the 1-Port and 6-Port UPIMs
PART
NUMBER
DESCRIPTION
SUPPORTED
ON JXU-1SFP-S
SUPPORTED ON
JXU-6GE-SFP-S
JX-SFP1GE-LX
SFP 1000BASE-LX Gigabit
Optical Transceiver SFP
Module
Yes
Yes
JX-SFP1GE-SX
SFP 1000BASE-SX Gigabit
Optical Transceiver SFP
Module
Yes
Yes
JX-SFP1GE-T
SFP 1000BASE-T Gigabit
Copper Transceiver SFP
Module
Yes
Yes
JX-SFP1FE-FX
SFP 100BASE-FX Optical
Transceiver SFP Module
Yes
No
Operating System Versions
you to bring revenue-generating capabilities online faster so
PART NUMBER
SCREENOS VERSION
JUNOS OS VERSION
you can realize bigger productivity gains and faster rollouts of
JXU-1SFP-S
6.0r2
8.4
JXU-6GE-SFP-S
JXU-8GE-TX-S
JXU-16GE-TX-S
6.0
8.3
new business models and ventures. At the same time, Juniper
Networks ensures operational excellence by optimizing your
network to maintain required levels of performance, reliability, and
availability. For more details, please visit www.juniper.net/us/en/
products-services.
Note: These are the minimum operating system versions that
support the UPIMs. Some features may require later versions.
3
About Juniper Networks
Juniper Networks is in the business of network innovation. From
devices to data centers, from consumers to cloud providers,
Juniper Networks delivers the software, silicon and systems that
transform the experience and economics of networking. The
company serves customers and partners worldwide. Additional
information can be found at www.juniper.net.
Corporate and Sales Headquarters
APAC Headquarters
EMEA Headquarters
To purchase Juniper Networks solutions,
Juniper Networks, Inc.
Juniper Networks (Hong Kong)
Juniper Networks Ireland
please contact your Juniper Networks
1194 North Mathilda Avenue
26/F, Cityplaza One
Airside Business Park
Sunnyvale, CA 94089 USA
1111 King’s Road
Swords, County Dublin, Ireland
representative at 1-866-298-6428 or
Phone: 888.JUNIPER (888.586.4737)
Taikoo Shing, Hong Kong
Phone: 35.31.8903.600
or 408.745.2000
Phone: 852.2332.3636
EMEA Sales: 00800.4586.4737
Fax: 408.745.2100
Fax: 852.2574.7803
Fax: 35.31.8903.601
www.juniper.net
Copyright 2010 Juniper Networks, Inc. All rights reserved. Juniper Networks, the Juniper Networks logo, Junos,
NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other
countries. All other trademarks, service marks, registered marks, or registered service marks are the property of
their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper
Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice.
1000196-004-EN
4
Dec 2010
Printed on recycled paper
authorized reseller.