Epson Enhanced Adhesive Synthetic Paper 44" x 100'

8293 Epson 2/22/01 4:39 PM Page 1
®
EPSON
EPSON Professional Media
Adhesive Synthetic Paper
For Use With:
EPSON Stylus® Pro 7500
EPSON Stylus Pro 9500
Product Information
Adhesive Synthetic Paper is an ideal choice for signage that requires
adhesive backing. An affordable, polypropylene-base media, it’s thin,
light, and very flexible with a durable, wet-strength base. It delivers
accurate colors and vivid results on its high-quality matte surface. An
instant-drying paper, it’s excellent for indoor banners and outdoor
signage. When laminated, it’s perfect for outdoor signage applications
as well. Best of all, its adhesive backing makes it possible to remove
and reposition signage for easy mounting.
Like all of Epson’s innovative media, this paper is engineered to give
you the highest resolution and color saturation possible. Epson’s printer
driver software actually optimizes the amount of ink released onto the
page, based on the type of paper used. As always, EPSON supplies
guarantee EPSON quality.
Features/Benefits
•
•
•
•
•
•
Re-positionable adhesive for easy mounting
Block-out backing to eliminate show-through
Non-glare surface for easy viewing
720 dpi printing for high-quality output
Dries instantly for easy handling with Epson inks
Water resistant coating for increased durability
Feature Checklist
Feature
Performance
Additional Comments
Indoor/outdoor usage
Recommended for both
UV lamination is recommended for outdoor usage.
Lightfastness
One year outdoors (laminated)
One year lightfast rating is laminated with a vinyl based UV film,
and is based on accelerated testing.
One month outdoors (unlaminated)
One month lightfast rating is based on an accelerated light test
with an actual rain test at 95% RH, 75˚F with a rain cycle of
18 minutes every 120 minutes.
Archivability
Not recommended
Resistance to water
Good
Bleeding does not occur with incidental water contact. However,
surface lamination is recommended in wet conditions to protect
the outer coating. The base is waterproof.
Ink drying time
Immediate
(less than 30 seconds)
Ink is dry to the touch after printing. However, it takes 24 hours
before it cures and becomes durable.
Lamination feasibility
Pressure sensitive; cold lamination only
A vinyl-based film that contains a UV absorbent is recommended
for lamination purposes. For anti-graffiti purposes, use a fluoridebased film (i.e. Tedlar™). For use in direct sunlight, avoid polyester
or polycarbonate film.
Surface adhesion
Flat surfaces only
For best results, apply the adhesive to a clean, flat surface.
And, test it before applying it to the final print. Stretching the
adhesive is not recommended, as the paper may shrink over time.
Adhesive backing
Re-positionable
Removable adhesive back provides enough strength and durability
for outdoor usage. However, strength will decrease with increased
re-positioning.
NOTE: Actual print stability and longevity will vary according to image, display conditions, light intensity, humidity, atmospheric conditions, and post-printing treatments.
Epson does not guarantee stability or longevity. For maximum print life, display all prints under glass or lamination or properly store them.
Professional Media Fact Sheet
8293 Epson 2/22/01 4:39 PM Page 2
Professional Media Adhesive Synthetic Paper
Technical Specifications
Basis weight
Thickness
ISO brightness
Opacity
Base material
Adhesive material
Surface finish
Core size
Spindle
Ordering Specifications
135 g/m2 (total weight)
5 mil
97%
93%
Polypropylene
PET
Matte
2"
2" high-tension1
SO41403
Driver Setting
SO41404
Adhesive Synthetic Paper
Operating Specifications
Required temperature for optimum performance
Required humidity for optimum performance
60˚ - 80˚ F
15˚ - 25˚ C
40% - 60% RH
SO41402 (24" x 100')
0-10343-83188-9
SO41403 (36" x 100')
0-10343-83189-6
SO41404 (44" x 100')
0-10343-83190-2
Packing Specifications
SO41402
1Optional printer accessory, available from Epson
EPSON Stylus Pro 9500, Part No. C811052
EPSON Stylus Pro 7500, Part No. C811103
Printer driver
(EPSON Stylus Pro 7500/9500)
Product code
Individual box UPC code
Product code
Individual box UPC code
Product code
Individual box UPC code
Individual
Individual
Individual
Individual
Individual
Individual
box
box
box
box
box
box
dimensions
weight
dimensions
weight
dimensions
weight
MSRP*
Per Unit
SO41402
SO41403
SO41404
$260.00
390.00
467.00
4.7" x 4.7" x 25.8"
9.2 lb
4.7" x 4.7" x 37.8"
13.5 lb
4.7" x 4.7" x 45.8"
16.4 lb
Per Square Foot
$1.30
1.30
1.27
* Actual prices may vary.
(Note: High humidity will prolong the drying time for lamination purposes.)
Epson America, Inc.
3840 Kilroy Airport Way, Long Beach, CA 90806
Epson Canada, Ltd.
550 McNicoll, Willowdale, Ontario M2H 2E1
Epson Latin America
6303 Blue Lagoon Drive, Miami, FL 33126
Specifications are subject to change without notice. EPSON and EPSON Stylus are registered trademarks of Seiko Epson Corporation. All other products and brand names are registered trademarks of
their respective companies. Epson disclaims any and all rights in these marks. Copyright 2001 Epson America, Inc. CPD-10496 5K 1/01 CL
Printed on Recycled Paper
Professional Media Fact Sheet