Intelligent Power Control™ IPC3600 Series
Enclosure Power Distribution Units (ePDU™)
IPC3601 Rear
IPC36XX- Front
CB
CHASSIS
• 1.72” (1U) x Depth 9.5” x Width 19.0”
• Weighs approximately 12 lbs.
• Powder coated black steel
• Detachable mounting brackets allow for
several mounting options
NEMA or IEC 320 OUTLETS
• IPC3601 has 8 IEC 60320 Type
C13 (computer style) outlets
• IPC3602 has 8 NEMA 5-15R
(3 prong) outlets
12 INDICATOR LIGHTS
• Main power system on
• Power “on” to outlets 1-8
• 2 Data and ethernet link
POWER INPUT
• IEC 60320 Type C20 Inlet
• Mating power cables must be
ordered separately
• IPC3601 has a full range power
supply for use at 100-240V
EMI/RFI FILTERING
• Common Mode - Line to Ground
• Differential Mode - Line to Line
• Filtered inlet isolates noise before
entering the system
• IPC3601-F3-3316 – NO FILTER
SPIKE/SURGESUPPRESSION
• Line to Neutral (or Line)
OVERLOAD PROTECTION
• Push button circuit breaker pops out
when an overload occurs
• Push to reset
SOFTWARE SECURITY
• User name/password security
• Settings allow the administrator to
disable unused interfaces
IPC3602 Rear
SERIAL/ETHERNET
• Serial RS232 via RJ22 connector on the
rear. 6’ RJ22 to DB9 cable included
• Serial baud rate is 9600 default or
38,400 maximum
• Ethernet (10/100) network via RJ45
connector on the rear. 6’ network
cable included
• Network setup allows DHCP or any
static public/private IP address
SOFTWARE INTERFACES
• Web interface provides a graphic
control interface through a web
browser (IE, Netscape, Mozilla)
• Telnet interface provides a text menu
control interface with any terminal
emulation software
• SNMP allows read/write capability
with trapping
• E-mail notification system provides e-mail
alerts or logs showing user activity
• Serial interface provides a text menu
control interface with any terminal
emulation software
• FTP utility allows firmware upgrades
SOFTWARE FEATURES
• Administrator and multiple users can
be configured
• User level access can be limited to
specific outlets
• Unit and outlet names can be configured
• Outlet groups can be created to
perform an action on multiple outlets
• Outlet control includes individual,
group and all outlet global control
• Outlet actions include on or off and reboot
• Global sequence allows all the
outlets to be turned on or off in a
preset sequence up to 999 seconds
• Outlet reboot automatically turns an outlet
off and back on with one command at a
preset time up to 999 seconds
• E-mail notification allows up to two
e-mail addresses to receive notifications
of alerts or events
AUTO-EVENT SCHEDULING
• Administrator can configure on or off
events for outlets or groups. The event
occurs at the preset time daily or weekly
SPECIFICATIONS
IPC3601
IPC3602
IPC3601-F3-3316
Approvals
CB, CE, UL/cUL Listed, FCC UL/cUL Listed, FCC
NA
Voltage Input/Output (50/60Hz)
100-240V~
120V~
200-240V~
Current Rating
16A
16A
24A
Full Load VA
1920VA @ 120V~
3840VA @ 240V~
1920VA
5760VA
Ethernet/Serial
YES
YES
YES
Outlets
IEC C13
NEMA 5-15R
IEC C13
Circuit Breaker
20A
20A
(2) 15/15A
EMI/RFI Filter
20A
20A
NO
Surge Suppression
YES
YES
YES
Power Input
C20 Inlet
C20 Inlet
Attached
Power Cable/Plug
Not Included
Not Included
10’ - L6-30P
2
www.pulizzi.com • pulizzisales@eaton.com • 800-870-2248 • Fax: 605-334-4999
© 2008 Eaton Corporation. All Rights Reserved. All specifications are subject to change without notice.
Accessories
Optional Cable Restraint and Management
TRANSVERSE MOUNTING
KIT-CABLRES-01
• Prevent downtime and accidental disconnection
• Secure cables/plugs to Power Distribution Unit
• Cable ties provide highest level of retention
Adjustable Mounting Options
010-9334:
C19 to NEMA 5-15P
125V, 15A Straight Blade
8 foot, 14AWG/3wire
Center Mount
Mounting Brackets
Are Detachable With
Several Mounting
Options Shown
010-9335:
C19 to NEMA 5-20P
125V, 20A Straight Blade
8 foot, 12AWG/3wire
Front Flush
Rear Flush
Front Recessed
Optional
Zero-U
Bracket
(001-1928-1)
Rack Mounting Hole Specification Table
19.00”
Y
Z A
HOLE SPECIFICATION TABLE
A
1.75
Y
.25
Z
1.25
010-9339:
C19 to NEMA L5-20P
125V, 20A Twist-Lock
8 foot, 12AWG/3wire
010-9341:
C19 to NEMA L6-20P
250V, 20A Twist-Lock
8 foot, 12AWG/3wire
010-9343:
CEE7-7 to C19
250V, 16A EUROPE (Schuko)
2.5M, 1.5mm/3wire Harmonized
010-0025: 8 foot
C13 to C14 Harmonized, 1mm/3wire
100-240V rated
www.pulizzi.com • pulizzisales@eaton.com • 800-870-2248 • Fax: 605-334-4999
© 2008 Eaton Corporation. All Rights Reserved. All specifications are subject to change without notice.
3
TVSS (Transient Voltage Surge Suppression)
MOV SPECIFICATIONS
EMI/RFI FILTERING COMMON MODE INSERTION LOSS
Mhz.
.15
.50
1.0
5.0
10.0
30.0
dB.
6
19
28
42
45
50
5.0
10.0
30.0
50
30
30
Continuous AC Voltage
150VAC
270VAC
320VAC
Continuous DC Voltage
200VDC
360VDC
420VDC
Max. DC Leakage
200µA
200µA
200µA
Low Varistor Voltage Limit
212VDC
389VDC
462VDC
Mhz.
.15
.50
1.0
High Varistor Voltage Limit
243VDC
453VDC
540VDC
dB.
6
6
30
Nominal Varistor Voltage
236VDC
424VDC
503VDC
Current For Varistor Voltage
1mA
1mA
1mA
Max. Clamp Voltage 8x20µs
360V
680V
810V
Max. Clamp Voltage Test Current 100A
100A
100A
Peak Current Rating (1 Pulse)
12000A
10000A
10000A
Peak Current Rating (2 Pulse)
9000A
6500A
6500A
Energy Rating (10x1000µs)
170J
325J
385J
Energy Rating (8x20µs)
170J
325J
385J
Capacitance
1700pF
970pF
820pF
Impulse Response Time
50ns
50ns
50ns
DIFFERENTIAL INSERTION LOSS
Environmental
Operating Temperature is 0 to 50 C
Storage Temperature is -40 to 70 C
Altitude Maximum 10,000 ft.
Relative Humidity is 95% Max Non-Condensing
IPC3601-3316
www.pulizzi.com • pulizzisales@eaton.com • 800-870-2248 • Fax: 605-334-4999
© 2008 Eaton Corporation. All Rights Reserved. All specifications are subject to change without notice.
Drawings are not shown to scale
Dimensions are in inches
IPC3602
(IPC3601 is similar in size)
4