Belkin F2F802L7-30M fiber optic cable

Structured Cabling Solutions
Belkin’s Lifetime Warranty ensures performance and reliability
These cables ensure the performance and reliability of servers, storage, and network switches. Built using the highest-quality fibre cable and
connectors, Belkin fibre-patch cables come with the satisfaction guarantee of Belkin’s Lifetime Warranty. All Belkin fibre cables are
factory-terminated and tested to ensure the highest level of performance and reliability.
All Belkin Fibre cables feature:
• Corning glass cores
• Ceramic ferrules
• 3M film for ferrule polish
• Epoxy terminated connectors
• ROHS-compliant, flexible PVC jacket
• 100% assembly tested
• A-tick certification
• Lifetime Warranty
Cable Jacket - The outermost layer of the
fibre cable.
Strengthening Fibres - The strengthening
fibres that help protect the core against damage
during installation or from being crushed.
Coating – This layer of thicker plastic surrounds
the cladding and helps protect the fibre core.
Cladding – The layer that protects the core and
causes the necessary refraction to allow light to
travel through the fibre-core segment.
Core – The physical component that transports
the optical data signal, made up of a continuous
strand of glass. The core’s diameter is
measured in microns.
62.5/125um
Multimode Duplex
50/125um
Multimode Duplex
Temperature (Storage)
-20°C to 80°
Flame Resistance
CCOFNR; UL-1666
62.5
50
Cladding Diameter (μm)
Physical
Specs
8.3/125um
Singlemode Duplex
-20°C to 70°
Temperature (Operation)
Core Diameter (μm)
50/125um 10G
Aqua Multimode Duplex
50
8.3
6.0
125
Buffer Diameter (μm)
900 ± 5um
Nominal Outer Diameter
3.0mm
Nominal Weight (kg/km)
15
Maximum Tensile Load
Short Term (N)
200
Long Term (N)
50
Minimum Bend Radius
Loaded (cm)
6.0
6.0
10.0
Installed (cm)
3.0
3.0
5.0
3.0
<0.5 dB
<0.5 dB
<0.5 dB
<0.5 dB
λ = 850nm
20
20
20
26
λ = 1310nm
20
20
20
26
Insertion Loss (dB)
Minimum Return Loss (dB)
λ = 850nm
0.7
2.3
2.5
-
λ = 1310nm
0.6
0.55
0.7
0.4
λ = 1550nm
-
-
-
0.22
Minimum Model Bandwidth (MHz-km)
λ = 850nm
200
500
550
-
λ = 1310nm
600
1000
-
-
Belkin Ltd.
+61 (0) 2 4350 4600
Tuggerah, Australia
Belkin International, inc.
310-898-1100
Los Angeles, CA 90220, USA
© 2008 Belkin International, Inc. All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
GD2635
Transmission
Specs
Maximum Attenuation (dB/km)
Structured Cabling Solutions
62.5/125 Multimode Fibre (ORANGE)
Connector
1 metre
2 metres
3 metres
5 metres
10 metres
20 metres
ST
ST
A2F20200-01M
A2F20200-02M
A2F20200-03M
A2F20200-05M
A2F20200-10M
A2F20200-20M
ST
SC
A2F20207-01M
A2F20207-02M
A2F20207-03M
A2F20207-05M
A2F20207-10M
A2F20207-20M
ST
LC
F2F202L0-01M
F2F202L0-02M
F2F202L0-03M
F2F202L0-05M
F2F202L0-10M
F2F202L0-20M
ST
MTRJ
F2F20290-01M
F2F20290-02M
F2F20290-03M
F2F20290-05M
F2F20290-10M
F2F20290-20M
SC
SC
A2F20277-01M
A2F20277-02M
A2F20277-03M
A2F20277-05M
A2F20277-10M
A2F20277-20M
SC
LC
F2F202L7-01M
F2F202L7-02M
F2F202L7-03M
F2F202L7-05M
F2F202L7-10M
F2F202L7-20M
SC
MTRJ
F2F20297-01M
F2F20297-02M
F2F20297-03M
F2F20297-05M
F2F20297-10M
F2F20297-20M
LC
LC
F2F202LL-01M
F2F202LL-02M
F2F202LL-03M
F2F202LL-05M
F2F202LL-10M
F2F202LL-20M
LC
MTRJ
F2F202L9-01M
F2F202L9-02M
F2F202L9-03M
F2F202L9-05M
F2F202L9-10M
F2F202L9-20M
MTRJ
MTRJ
F2F20299-01M
F2F20299-02M
F2F20299-03M
F2F20299-05M
F2F20299-10M
F2F20299-20M
5 metres
10 metres
20 metres
50/125 Multimode Fibre (ORANGE)
Connector
1 metre
2 metres
3 metres
ST
LC
F2F402L0-01M
F2F402L0-02M
F2F4202L0-03M
F2F402L0-05M
F2F402L0-10M
F2F402L0-20M
SC
SC
A2F40277-01M
A2F40277-02M
A2F40277-03M
A2F40277-05M
A2F40277-10M
A2F40277-20M
SC
LC
F2F402L7-01M
F2F402L7-02M
F2F402L7-03M
F2F402L7-05M
F2F402L7-10M
F2F402L7-20M
LC
LC
F2F402LL-01M
F2F402LL-02M
F2F402LL-03M
F2F402LL-05M
F2F402LL-10M
F2F402LL-20M
50/125 Multimode 10G Fibre (AQUA)
1 metre
2 metres
3 metres
5 metres
10 metres
20 metres
ST
Connector
LC
F2F402L0-01M-G
F2F402L0-02M-G
F2F4202L0-03M-G
F2F402L0-05M-G
F2F402L0-10M-G
F2F402L0-20M-G
SC
SC
F2F40277-01M-G
F2F40277-02M-G
F2F40277-03M-G
F2F40277-05M-G
F2F40277-10M-G
F2F40277-20M-G
SC
LC
F2F402L7-01M-G
F2F402L7-02M-G
F2F402L7-03M-G
F2F402L7-05M-G
F2F402L7-10M-G
F2F402L7-20M-G
LC
LC
F2F402LL-01M-G
F2F402LL-02M-G
F2F402LL-03M-G
F2F402LL-05M-G
F2F402LL-10M-G
F2F402LL-20M-G
Connector
1 metre
2 metres
3 metres
5 metres
10 metres
20 metres
ST
ST
F2F80200-01M
F2F80200-02M
F2F80200-03M
F2F80200-05M
F2F80200-10M
F2F80200-20M
ST
SC
F2F80207-01M
F2F80207-02M
F2F80207-03M
F2F80207-05M
F2F80207-10M
F2F80207-20M
ST
LC
F2F802L0-01M
F2F802L0-02M
F2F802L0-03M
F2F802L0-05M
F2F802L0-10M
F2F802L0-20M
SC
SC
F2F80277-01M
F2F80277-02M
F2F80277-03M
F2F80277-05M
F2F80277-10M
F2F80277-20M
SC
LC
F2F802L7-01M
F2F802L7-02M
F2F802L7-03M
F2F802L7-05M
F2F802L7-10M
F2F802L7-20M
LC
LC
F2F802LL-01M
F2F802LL-02M
F2F802LL-03M
F2F802LL-05M
F2F802LL-10M
F2F802LL-20M
Belkin Ltd.
+61 (0) 2 4350 4600
Tuggerah, Australia
Belkin International, inc.
310-898-1100
Los Angeles, CA 90220, USA
© 2008 Belkin International, Inc. All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
GD2635
8.3/125 Singlemode Fibre (YELLOW)
Structured Cabling Solutions
Fibre-Connection Types
ST – The ST connector uses a push-and-turnto-lock system.
LC – The LC connector features a small form factor and
resembles the SC connector.
SC – The SC connector has a molded, plastic plug
casing and a push/pull locking system.
MTRJ – The MTRJ connector is a small form-factor
connector with a square plastic casing that contains both
fibre strands into a single polymer ferrule.
Name
Reference
Standard
Speed
Segment Length
Recommended Cable type
10Base-FL
IEEE802.3j
10Mbps
2km (MMF)
10km (SMF)
Multimode fibre (850nm)
Singlemode fibre (1310nm)
100Base-FX
IEEE802.3u
100Mbps
2km (MMF)
10km (SMF)
Multimode fibre (850nm)
Singlemode fibre (1310nm)
Industry standard for Fast Ethernet over
Not compatible with 10Base-FL
100Base-SX
IEEE802.3u
100Mbps
300m
Multimode fibre (850nm)
Compatible with 10Base-FL
100Base-BX
IEEE802.3u
100Mbps
Singlemode fibre (1310nm)
Requires the use of a special multiplexer
1000Base-SX
IEEE802.3z
1Gbps
275m (62.5/125)
550m (50/125)
Multimode fibre (850nm (62.5/125))
Multimode fibre (850nm (50/125))
1000Base-LX
IEEE802.3z
1Gbps
300m (MMF)
5km (SMF)
Multimode fibre (850nm)
Singlemode fibre (1310nm)
1000Base-LH
Non-standard
1Gbps
10km
Singlemode fibre (1310nm)
Non-standard but industry accepted.
Backwards compatible with 1000Base-LX
1000Base-ZX
Non-standard
1Gbps
70km
Singlemode fibre (1550nm)
Non-standard but industry accepted.
10GBase-SR
IEEE802.3ae
10Gbps
33m (62.5/125)
82m (50/125)
Multimode fibre (850nm (62.5/125))
Multimode fibre (850nm (50/125))
10GBase-LX4
IEEE802.3ae
10Gbps
300m (MMF)
10km (SMF)
Multimode fibre (850nm)
Singlemode fibre (1310nm)
10GBase-LR
IEEE802.3ae
10Gbps
10km
Singlemode fibre (1310nm)
10GBase-LRM
IEEE802.3ae
10Gbps
300m
Multimode fibre (1310nm)
10GBase-ER
IEEE802.3ae
10Gbps
40km
Singlemode fibre (1550nm)
10GBase-ZR
Non-standard
10Gbps
80km
Singlemode fibre (1550nm)
Note
Mode conditioning patch cord is required when using MMF
Non-standard but industry accepted.
Security
Distance
Copper
Fibre
Can be compromised
Multimode
100 metres @ 1,000Mbps
40km or more at 10,000 Mbps
Electrical Noise
Vulnerable to cross talk and voltage interference
Impervious
Installation / Use
Thicker and heavier
Lightweight and thin diameter
Belkin Ltd.
+61 (0) 2 4350 4600
Tuggerah, Australia
Belkin International, inc.
310-898-1100
Los Angeles, CA 90220, USA
© 2008 Belkin International, Inc. All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
GD2635
Fibre and Copper - How do they compare?