7P Horizontal Type
TS128M~8GSDOM7H
SATA Flash Modules
Features
Description
Serial-ATA is designed as a successor to the
•
RoHS compliant
legacy SATA standard. The new standard is
•
Fully compatible with devices and OS that support the
SATA 1.0a 1.5Gbps standard
dedicated to achieve higher transfer rate with thinner
cables and more reliable operation than Parallel ATA
interface.
SATA
Flash
Modules
is
perfect
replacement storage device for PCs, Laptops,
gaming systems, and handheld devices.
•
7 pin female SATA connector with latch
•
Connect to motherboard directly without cable
•
Non-volatile Flash Memory for outstanding data
retention
•
Placement
The on-chip hardware 13/24 bit BCH-ECC engines can
correct up to 24 bit errors per 1,024 byte data.
•
Support global wear-leveling algorithm which ensures
maximum lifespan.
•
Supports
Ultra DMA Mode 0 to 5
Multiword DMA mode 0 to 2
PIO Mode 0 to 4
•
Supports ATA Security Commands
•
Support S.M.A.R.T function (self-definition)
•
Mechanical write-protect switch
•
Low Power Consumption
•
Power Supply: 3.3V ± 5%(UDMA mode 5) / 5.0V ±
10%(UDMA mode 4 or lower)
•
Shock resistance
Dimensions
Side
Millimeters
Inches
A
40.0 ± 0.3
1.57 ± 0.012
B
30.0 ± 0.2
1.18 ± 0.008
C*
24.3 ± 0.5
0.96 ± 0.020
* Please refer to Mechanical Drawing
Transcend Information Inc.
1
V0.1
7P Horizontal Type
TS128M~8GSDOM7H
SATA Flash Modules
Specifications
Physical Specification
Form Factor
SATA Flash Module Horizontal Type
Storage Capacities
128M~8GB
Dimensions (mm)
Length
40.0 ± 0.3
Width
30.0 ± 0.2 (Not including Write-Protect Switch and SATA connector)
Height
24.3 ± 0.5 (refer to mechanical drawing)
Input Voltage
5V ± 10% / 3.3V ± 5%
Weight
8g
Signal: SATA 7 pins female connector with latch
Connector
Power: 2P 1.5mm pitch wafer connector
Environmental Specifications
Operating Temperature
0 ℃ to 70 ℃
Storage Temperature
- 40 ℃ to 85 ℃
Humidity
Operating Humidity (Non condensation)
0% to 95%
Storage Humidity (Non condensation)
0% to 95%
Power Consumption
4GB SATA Flash Modules
Power Consumption
(DC 5V @25℃)
Transcend Information Inc.
Crystal Disk Mark 1.0.6 / 50MB
Read
212.2 mA(peak)
Write
207.3 mA(peak)
Standby
111.8 mA
2
V0.1
7P Horizontal Type
TS128M~8GSDOM7H
SATA Flash Modules
Reliability
13bit/1K Byte BCH ECC(2k+64 / 4k+128 byte per page flash)
Data Reliability
24bit/1K Byte BCH ECC(4k+208 byte per page flash)
Data Retention
10 years
Connector Durability
500 mating cycles
Performance*
Model P/N
Read (KB/s)
Write (KB/s)
Random Read (KB/s)
Random Write (KB/s)
2GB SATA Flash Module
53696
25491
51174
10518
* Note : The performance is based on Samsung K9F8G08U0M, single channel. Environment: at 25 ℃, tested with
®
GA-8IG1000MK, 256 MB RAM, SATA interface support UDMA5, Windows XP Version 2002 SP2, benchmark utility :
HDBENCH (version 3.4006), copied file 100MB
Actual Capacity
Model P/N
Capacity
C/H/S
Capacity
User capacity (Bytes)
TS512MSDOM7H
512M
971 / 16 / 63
477MB
500,432,896
TS1GSDOM7H
1GB
1966 / 16 / 63
967MB
1,014,333,440
TS2GSDOM7H
2GB
3900 / 16 / 63
1.87GB
2,008,801,280
TS4GSDOM7H
4GB
7785 / 16 / 63
3.73GB
4,009,922,560
TS8GSDOM7H
8GB
15538 / 16 / 63
7.46GB
8,016,560,128
* Note: FAT format for <4GB, FAT32 format for 4~8GB
Certification
EMC
CE, FCC and BSMI (T.B.D)
Transcend Information Inc.
3
V0.1
7P Horizontal Type
TS128M~8GSDOM7H
SATA Flash Modules
Mechanical Drawing
B
A
Bottom View (Normal Type)
C
Side View (Normal Type)
Transcend Information Inc.
4
V0.1
7P Horizontal Type
TS128M~8GSDOM7H
SATA Flash Modules
A
B
Bottom View (Reversed Type)
C
Side View (Reversed Type)
Transcend Information Inc.
5
V0.1
7P Horizontal Type
TS128M~8GSDOM7H
SATA Flash Modules
Functionality
Pin Assignments
Pin No.
Pin Name
01
GND
02
A+
03
04
AGND
05
B-
06
07
B+
GND
Disk Active
Write-Protect
Indicator
Disabled
Transcend Information Inc.
6
V0.1
7P Horizontal Type
TS128M~8GSDOM7H
SATA Flash Modules
Block
Block Diagram
SATA 7 PIN Connector
Data bus
PATA
Data
bus
to
SATA
Control
Signal
Flash Memory
-CE0, -CE1…
D0 – D7
-CE0 ~ -CE3
-WE…-RE
Others
IDE
Bridge
D0 ~ D7
Flash Disk
Controller
D8 ~ D15
2 PIN
3.3V/1.8V
5V/3.3V
-CE0, -CE1…
Voltage
Regulator
Flash Memory
D0 – D7
-CE0 ~ -CE3
-WE…-RE
Flash Memory
DC Characteristics
Parameter
Symbol
Min.
Max.
Unit
Supply Voltage
VCC
2.97
5.5
V
High level output voltage
VOH
VCC – 0.8
Low level output voltage
VOL
High level input voltage
Low level input voltage
Pull up resistance
2
Pull down resistance
Transcend Information Inc.
VIH
Remark
V
0.8
V
2.4
V
Non-schmitt trigger
2.05
V
Schmitt trigger
0.6
V
Non-schmitt trigger
1.25
V
Schmitt trigger
VIL
RPU
52.7
141
KOhm
RPD
47.5
172
kOhm
1
1
7
V0.1
7P Horizontal Type
TS128M~8GSDOM7H
SATA Flash Modules
Command Set
FR
SC
SN
CY
DH
LBA
E5 or 98h
–
–
–
–
Y
–
Support
Execute Drive Diagnostic
90h
–
–
–
–
Y
–
Support
3
Erase Sector
C0h
–
Y
Y
Y
Y
Y
Support
4
Flush Cache
E7h
–
–
–
–
Y
–
Support
5
Format Track
50h
–
Y
–
Y
Y
Y
Support
6
Identify Device
ECh
–
–
–
–
Y
–
Support
7
Idle
E3h or 97h
–
Y
–
–
Y
–
Support
8
Idle Immediate
E1h or 95h
–
–
–
–
Y
–
Support
9
Initialize Drive Parameters
91h
–
Y
–
–
Y
–
Support
10
NOP
00h
–
–
–
–
Y
–
Support
11
Read Buffer
E4h
–
–
–
–
Y
–
Support
12
Read DMA
C8h
–
Y
Y
Y
Y
Y
Support
13
Read Multiple
C4h
–
Y
Y
Y
Y
Y
Support
14
Read Sector(s)
20h or 21h
–
Y
Y
Y
Y
Y
Support
15
Read Verify Sector(s)
40h or 41h
–
Y
Y
Y
Y
Y
Support
16
Recalibrate
1Xh
–
–
–
–
Y
–
Support
17
Request Sense
03h
–
–
–
–
Y
–
Support
18
Security Disable Password
F6h
–
–
–
–
Y
–
Support
19
Security Erase Prepare
F3h
–
–
–
–
Y
–
Support
20
Security Erase Unit
F4h
–
–
–
–
Y
–
Support
21
Security Freeze Lock
F5h
–
–
–
–
Y
–
Support
22
Security Set Password
F1h
–
–
–
–
Y
–
Support
23
Security Unlock
F2h
–
–
–
–
Y
–
Support
24
Seek
7Xh
–
–
Y
Y
Y
Y
Support
25
Set Feature
EFh
Y
–
–
–
Y
–
Support
26
Set Multiple Mode
C6h
–
Y
–
–
Y
–
Support
27
Set Sleep Mode
E6h or 99h
–
–
–
–
Y
–
Support
28
Standby
E2 or 96h
–
–
–
–
Y
–
Support
29
Standby Immediate
E0 or 94h
–
–
–
–
Y
–
Support
Command
Code
1
Check Power Mode
2
Status
Note
Transcend Information Inc.
V0.1
7P Horizontal Type
TS128M~8GSDOM7H
SATA Flash Modules
30
Translate Sector
87h
–
Y
Y
Y
Y
Y
Support
31
Wear Level
F5h
–
–
–
–
Y
–
Support
32
Write Buffer
E8h
–
–
–
–
Y
–
Support
33
Write DMA
CAh
–
Y
Y
Y
Y
Y
Support
34
Write Multiple
C5h
–
Y
Y
Y
Y
Y
Support
35
Write Multiple w/o Erase
CDh
–
Y
Y
Y
Y
Y
Support
36
Write Sector(s)
30h or 31h
–
Y
Y
Y
Y
Y
Support
37
Write Sector(s) w/o Erase
38h
–
Y
Y
Y
Y
Y
Support
38
Write Verify
3Ch
–
Y
Y
Y
Y
Y
Support
Definitions
FR = Features Register
SC =Sector Count register (00H to FFH, 00H means 256 sectors)
SN = Sector Number register
CY = Cylinder Low/High register
DH = Head No. (0 to 15) of Drive/Head register
LBA = Logic Block Address Mode Support
– = Not used for the command
Y = Used for the command
Transcend Information Inc.
V0.1
7P Horizontal Type
TS128M~8GSDOM7H
SATA Flash Modules
SMART Command Set
SMART Command Set
SMART Feature Register Values
D0h
Read Data
D5h
Read Log
D1h
Read Attribute Threshold
D6h
Write Log
D2h
Enable/Disable Autosave
D8h
Enable SMART Operations
D3h
Save Attribute Values
D9h
Disable SMART Operations
D4h
Execute OFF-LINE Immediate
DAh
Return Status
1. If reserved size is below the Threshold, the status can be read from Cylinder register by Return Status command (DAh).
SMART Data Structure
BYTE
F/V
Decription
0-1
X
Revision code
2-361
X
Vendor specific
362
V
Off line data collection status
363
X
Self-test execution status byte
364-365
V
Total time in seconds to complete off-line data collection activity
366
X
Vendor specific
367
F
Off-line data collection capability
368-369
F
SMART capability
Error logging capability
370
F
7-1 Reserved
0 1=Device error logging supported
371
X
Vendor specific
372
F
Short self-test routine recommended polling time (in minutes)
373
F
Extended self-test routine recommended polling time (in minutes)
374
F
Conveyance self-test routine recommended polling time (in minutes)
375-385
R
Reserved
386-395
F
Date Code
396-397
F
Number of initial invalid block (396 = MSB, 397 = LSB)
398-399
V
Number of run time bad block (398 = MSB, 399 = LSB)
400
V
Number of spare block
Transcend Information Inc.
1
V0.1
7P Horizontal Type
TS128M~8GSDOM7H
511
V
SATA Flash Modules
Data structure checksum
F=the content of the byte is fixed and does not change.
V=the content of the byte is variable and may change depending on the state of the device or
the commands executed by the device.
X=the content of the byte is vendor specific and may be fixed or variable.
R=the content of the byte is reserved and shall be zero.
* 4 Byte value : [MSB] [2] [1] [LSB]
Transcend Information Inc.
11
V0.1
7P Horizontal Type
TS128M~8GSDOM7H
SATA Flash Modules
ID Table
Table Information
Word
Address
Default
Value
Total
Bytes
044Ah
2
General configuration – Bit Significant with ATA-7 definitions.
1
XXXXh
2
Default number of cylinders
2
0000h
2
Reserved
3
00XXh
2
Default number of heads
4
0000h
2
Obsolete
5
0240h
2
Obsolete
6
XXXXh
2
Default number of sectors per track
Data Field Type Information
7-8
XXXXh
4
Number of sectors per card (Word 7 = MSW, Word 8 = LSW)
9
XXXXh
2
Obsolete
10-19
aaaa
20
Serial number in ASCII (Right Justified)
20
0002h
2
Obsolete
21
0002h
2
Obsolete
22
0000h
2
Number of ECC bytes passed on Read/Write Long Commands
23-26
aaaa
8
Firmware revision in ASCII. Big Endian Byte Order in Word
27-46
aaaa
40
Model number in ASCII (Left Justified) Big Endian Byte Order in Word
47
XXXXh
2
Maximum number of sectors on Read/Write Multiple command
48
0000h
2
Reserved
49
0F00h
2
Capabilities ( Default)
50
0000h
2
Reserved
51
0200h
2
PIO data transfer cycle timing mode (PIO mode 2)
52
0000h
2
Obsolete
53
0007h
2
Field Validity
54
XXXXh
2
Current numbers of cylinders
55
XXXXh
2
Current numbers of heads
56
XXXXh
2
Current sectors per track
57-58
XXXXh
4
Current capacity in sectors (LBAs)(Word 57 = LSW, Word 58 = MSW)
59
0100h
2
Multiple sector setting
60-61
XXXXh
4
Total number of sectors addressable in LBA Mode
62
0000h
2
Reserved
63
0007h
2
Multiword DMA transfer. (Support Multiword mode 0-2)
64
0003h
2
Advanced PIO modes supported (Support PIO mode 3 and PIO mode 4)
65
0078h
2
Minimum Multiword DMA transfer cycle time per word. (120ns)
66
0078h
2
Recommended Multiword DMA transfer cycle time. (120ns)
67
0078h
2
Minimum PIO transfer cycle time without flow control (120ns)
Transcend Information Inc.
12
V0.1
7P Horizontal Type
TS128M~8GSDOM7H
SATA Flash Modules
Word
Address
Default
Value
Total
Bytes
68
0078h
2
Minimum PIO transfer cycle time with IORDY flow control (120ns)
69-79
0000h
22
Reserved
80
0080h
2
Major revision number
Data Field Type Information
81
0000h
2
Mimor revision number
82
742Bh
2
Command sets supported 0
83
5008h
2
Command sets supported 1
84
4003h
2
Command sets supported 2
85
XXXXh
2
Command sets Enable 0
86
XXXXh
2
Command sets Enable 1
87
4003h
2
Command sets Enable 2
88
003Fh
2
Ultra DMA Mode Supported and Selected
89
0001h
2
Time required for Security erase unit completion (2 min)
90
0000h
2
Time required for Enhanced security erase unit completion
91
0000h
2
Current Advanced power management value
92
0000h
2
Reserved
93
XXXXh
2
Hardware configuration test result
94-127
0000h
68
Reserved
128
0001h
2
Security status (Default)
129-159
0000h
62
Vendor unique bytes
160
0000h
2
Power requirement description
161-255
0000h
190
Transcend Information Inc.
Reserved
13
V0.1
7P Horizontal Type
TS128M~8GSDOM7H
SATA Flash Modules
Ordering Information
TS XG SDOM XX
Connector type
7H = 7pin SATA horizontal
22V = 22pin SATA vertical
22H = 22pin SATA
horizontal
SATA Flash Module
Transcend Product
Capacity:
128M-8G
1. The above technical information is based on industry standard data and has been tested to be reliable. However,
Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with
the use of this product. Transcend reserves the right to make changes to the specifications at any time without prior notice.
2. For specific capacity, performance, and reliability requirement, please contact with sales.
TAIWAN
No.70, XingZhong Rd., NeiHu Dist., Taipei, Taiwan, R.O.C
TEL +886-2-2792-8000
Fax +886-2-2793-2222
E-mail: sales@transcend.com.tw
www.transcend.com.tw
Transcend Information Inc.
USA
Los Angeles:
E-mail: sales@transcendusa.com
Maryland:
E-mail: sales_md@transcendusa.com
www.transcendusa.com
CHINA
E-mail: sales@transcendchina.com
www.transcendchina.com
GERMANY
E-mail: vertrieb@transcend.de
www.transcend.de
HONG KONG
E-mail: sales@transcend.com.hk
www.transcendchina.com
JAPAN
E-mail: sales@transcend.co.jp
www.transcend.jp
THE NETHERLANDS
E-mail: sales@transcend.nl
www.transcend.nl
United Kingdom
E-mail: sales@transcend-uk.com
www.transcend-uk.com
Korea
E-mail: sales@transcend.co.kr
www.transcend.co.kr
14
V0.1