ADVANTAGE® ELECTROL®
(UP TO 12' x 12')
Da-Lite Screen Company, Inc.
3100 North Detroit Street
Post Office Box 137
Warsaw, Indiana 46581-0137
Phone: 574-267-8101
800-622-3737
Fax: 574-267-7804
Toll Free Fax: 877-325-4832
www.da-lite.com
e-mail: info@da-lite.com
Automatic Electric Projection Screen Model
SPECIFICATION DATA
SUGGESTED SPECIFICATIONS: ________________ projection screen(s), ___________ (H) x _____________ (W), electrically operated 120 volt
(60Hz), not more than 2.4 amp with a quick connect male plug-in connector on the motor. Shall have specially designed motor mounted
inside the roller, to be three wire with ground, quick reversal type, oiled for life, with automatic thermal overload cutout, integral gears,
capacitor and an electric brake to prevent coasting. To have preset but adjustable limit switches to automatically stop picture surface in
the “up” and “down” positions. Junction box shall be externally integrated into the housing making it possible to install the housing and
wire to the building’s electrical system during construction. The junction box shall contain a quick connect connector that is mounted in
the housing for easy plug-in connection to the motorized fabric and roller assembly. The roller to be of rigid metal. The motorized fabric
and roller assembly to be installed in the case at the factory or at a later time at the job site. Roller mounting brackets to be adjustable to
allow centering or offsetting of the screen within the case. Screen to be designed for left or right-hand motor installation. Screen fabric
to be flame retardant and mildew resistant fiberglass with black masking borders standard. Bottom of fabric shall be formed into a
pocket holding a metal rod. Heavy duty plastic caps shall protect the ends of the rod. Top, front and back of case to be made of extruded
aluminum powder coated white. End caps to be of heavy gauge steel, powder coated white. Bottom of case to have a removable
access door. Door to be of extruded aluminum powder coated white. Bottom of case to be self-trimming, with a built-in flange around
the bottom of the case. To be complete with a three-position control switch and cover plate. Suitable for use in environmental air space
in accordance with section 300-22 (c) of the National Electric Code, and sections 2-128, 12-010 (3) and 12-100 of the Canadian Electrical
Code, part 1, CSA C22.1. Screen to be listed by Underwriters’ Laboratories.
Matte White: Horizontal seam required when both dimensions exceed 10'.
SUGGESTED METHODS OF INSTALLATION
High Contrast Matte White: Available in sizes where both dimensions
do not exceed 10'.
Video Spectra 1.5 : Available in sizes where both dimensions do not
AUDIENCE
SIDE
exceed 8'.
VARIABLE POSITION
High Power® and High Contrast High Power®: Available in sizes up
MOUNTING BRACKET
to and including 9' x 12'. Horizontal seam required when both
dimensions exceed 6'.
1
MOTOR END
6 ⁄16"
WHEN ORDERING, MARK APPROPRIATE SELECTIONS:
Select size from charts on the other side.
ELECTRICAL
JUNCTION BOX
Select viewing surface:
o Matte White o High Contrast Matte White o High Power® o Video Spectra 1.5 o High Contrast High Power® 63⁄8"
Greenguard® and Greenguard® Children and Schools Certified.
Optional Accessories:
o Extra Drop available to lower picture area more than normal.
Specify total drop at top _____ (black
(blackor
orwhite)
white) or at bottom
_____ (black
or white)
white). 13' maximum total surface height
(black or
including picture area.
o Single Motor Low Voltage Control (LVC) - external.
o Single Motor Low Voltage Control (LVC) - built-in.
o Wireless Remote Control for LVC.
o Radio Frequency Remote.
o Radio Frequency Range Extender available
o Infrared Remote.
o Silent Motor.
o Silent Motor with Integrated LVC.
o Key Locking Cover Plate for 120V or LVC Switch.
o Key Operated Switch for 120V only (NOTE: Cannot be used
with LVC).
o No Borders (Black masking borders standard).
o 220 Volt (50 Hz) Motor.
o Video Projector Interface Control - external.
o Video Projector Interface Control - built-in (Adds 10" to case
length on 220V motor only).
o SCB-100 RS-232 Serial Control Board - external.
o NET-100 Ethernet-Serial Adapter
o SCB-100 RS-232 Serial Control Board - built-in. (adds 10" to
overall length of case)
o NET-100 Ethernet-Serial Adapter
o SCB-200 RS-232 Serial Control Board - built-in only. (adds 10"
to overall length of case)
o NET-200 Ethernet-Serial Adapter
o WC-200 Wall Controller
o IR-200 Infrared Remote
73⁄4"
8"
61⁄16"
⁄8" THREADED ROD
(NOT SUPPLIED)
ATTACHED TO
HANGER BRACKET
3
63⁄8"
SELF-TRIMMING
FLANGE
73⁄4"
FINISHED
CEILING
SEE DETAIL A
37⁄16"
⁄8" THREADED ROD
(NOT SUPPLIED)
15
63⁄8" 7 ⁄16"
3
HANGER BRACKET
DETAIL A
73⁄4"
Viewing Area
H x W
Cm
43" x 57"
109 x 145
50" x 67"
127 x 170
57" x 77"
145 x 196
60" x 80"
152 x 203
69" x 92"
175 x 234
87" x 116"
221 x 295
105" x 140"
267 x 356
120" x 160"
305 x 406
VIDEO (NTSC 4:3) FORMAT DIMENSIONS (2" standard black drop at top)
Nominal Diagonal
Overall Length of Case (does not include flange)
In.
Cm
In.
Cm
72"
183
651⁄2"
166
84"
213
751⁄2"
192
96"
244
891⁄2"
227
100"
254
891⁄2"
227
120"
305
1011⁄2"
258
150"
381
1251⁄2"
319
180"
457
1491⁄2"
380
200"
508
1691⁄2"
431
Approx. Ship. Wt.
Lbs.
Kg
6027.2
6529.5
7734.9
7734.9
8940.4
10045.4
10648.1
12355.8
HDTV (16:9) FORMAT DIMENSIONS (2" standard black drop at top)
Nominal Diagonal
Overall Length of Case (does not include flange)
In.
Cm
In.
Cm
92"
234
891⁄2"
227
106"
269
1011⁄2"
258
110"
279
1051⁄2"
268
119"
302
1131⁄2"
288
133"
338
1251⁄2"
319
159"
404
1491⁄2"
380
184"
467
1691⁄2"
431
Approx. Ship. Wt.
Lbs.
Kg
7534.0
8839.9
8940.4
9543.1
9844.5
10447.2
12355.8
WIDE (16:10)FORMAT DIMENSIONS (2" standard black drop at top)
Nominal Diagonal
Overall Length of Case (does not include flange)
In.
Cm
In.
Cm
94"
239
891⁄2"
227
109"
277
1011⁄2"
258
113"
287
1051⁄2"
268
130"
330
1191⁄2"
304
137"
348
1251⁄2"
319
164"
417
1491⁄2"
380
189"
480
1691⁄2"
431
Approx. Ship. Wt.
Lbs.
Kg
7534
8839.9
8940.4
9744
10045.4
10447.2
12355.8
Viewing Area
H x W
Cm
45" x 80"
114 x 203
52" x 92"
132 x 234
54" x 96"
137 x 244
58" x 104"
147 x 264
65" x 116"
165 x 295
78" x 139"
198 x 353
90" x 160"
229 x 406
Viewing Area
H x W
Cm
50" x 80"
127 x 203
571⁄2" x 92"
146 x 234
60" x 96"
152 x 244
69" x 110"
175 x 279
721⁄2" x 116"
184 x 295
87" x 139"
221 x 353
100" x 160"
254 x 406
Sizes
H x W
50" x 50"
60" x 60"
70" x 70"
84" x 84"
6' x 8'^
8' x 8'
7' x 9'^
9' x 9'^
8' x 10'^
10' x 10'^
9' x 12'^
12' x 12'
SQUARE FORMAT DIMENSIONS (screens with ^ have 2" standard black drop at top)
Overall Length of Case (does not include flange)
Approx. Ship. Wt.
Cm
In.
Cm
Lbs.
127 x 127
551⁄2"141 54
152 x 152
651⁄2"166 61
178 x 178
751⁄2"192 68
213 x 213
891⁄2"227 79
183 x 244
1011⁄2"258 89
244 x 244
1011⁄2"258 91
213 x 274
1131⁄2"288 96
274 x 274
1131⁄2"288 97
244 x 305
1251⁄2"319 100
305 x 305
1251⁄2"319 102
274 x 366
1491⁄2"380 106
366 x 366
1491⁄2"380 119
Overall case length dimensions ±¼" (6mm).
Detail dimensional drawings, wiring diagrams and installation instructions available
upon request.
Specifications subject to change without notice.
Custom formats and sizes available upon request.
Electrical junction box extends 21⁄8" past case length on left end of case (11⁄8" past
ceiling flange).
Internal junction box available (will add 31⁄2" to overall case length and must be
specified at time of order, recommended for drywall installations).
Junction box on top of case available (will add 31⁄2" to overall case length and 17⁄8" to
height at left end of case; must be specified at time of order)
Kg
24.5
27.7
30.8
35.8
40.4
41.3
43.5
44.0
45.4
46.3
48.1
54.0
Project:
Architect:
Phone:
Contractor:
Phone:
Supervisor:
Phone:
Supplier:
Date:
Revised:
Rev. 5/11