AF3-080E
COLOR REVERSAL FILMS
FUJICHROME Sensia 200 [RM]
1.
FEATURES AND USES
FUJICHROME Sensia 200 [RM] is a high-image-quality,
daylight ISO 200 color reversal film which features extremely fine grain and sharpness, as well as faithful and
brilliant color reproduction and rich tones ranging from
the brightest highlights to the deepest shadows. These
qualities make this film an excellent choice not only for
normal outdoor photography but also for a wide variety
of indoor scenes and situations requiring high shutter
speeds.
Sensia 200 is ideally suitable for slide projection and for
making big enlargements, as well as for printing on
FUJICHROME paper and making high-quality duplicates using duplicating film.
Features
• Ultra-fine Grain /
High Resolution
• Faithful and
Brilliant Color
Reproduction
• Rich Tone
Reproduction
• Superior
Reciprocity
Characteristics
SPEEDS
Light Source
Speed
Filter
Daylight
ISO 200/24°
None
Tungsten Lamps
(3200K)
ISO 64*/19°*
No.80A**
(LBB-12***)
* Indicates the effective speed resulting from designated filter
use.
** Wratten Filter
*** Fuji Light Balancing Filter
3.
FILM SIZES, EMULSION NUMBER,
BASE MATERIAL AND THICKNESS
Results
• Refined images ideal for
large-size enlargements
and other high-magnification applications, as a
result of its extremely fine
grain
• ISO-100 film-level performance giving more faithful
color reproduction and
higher color saturation
than any previous ISO
200-speed film
Sizes
#951 –
Base Material ............ Cellulose Triacetate
Base Thickness ........ 127 µm
4.
EXPOSURE GUIDE FOR VARIOUS
LIGHT CONDITIONS
Use a meter for exposure determination. If a meter is
not available, refer to the following table.
Daylight Exposure
• Minimal long-exposurerelated loss in film speed
and changes in color as a
result of improved silver
halide emulsion
Lens
Aperture
• As with other
FUJICHROME film, worldwide processing available
using E-6 / CR-56
Emulsion Number
Rolls:
135 .......... 24-, 36-exp.
• Smooth and continuous
gradation linearity from the
highlights to the shadows
assuring delicate texture
and rich tone reproduction
• Ideal Slide Projec- • Clear, fine-grain, delicately
textured images with natution Suitability
ral and brilliant colors, perfect for projection
• E-6 / CR-56*
Processing
2.
Light
Conditions
Shutter
Speed (Sec.)
Cloudy
Seashore or
Cloudy Day or
Snow Scenes Bright Hazy
Under Bright Sunlight Sunlight Bright Open
Shade
Sun
f/16
f/16
f/11
1/500
1/250
1/250
f/8
f/5.6
1/250 1/250
NOTES • The foregoing settings are for 2 hours after sunrise
and 2 hours before sunset.
• Provide a lens opening 1/2-stop smaller during the
summer and 1/2-stop larger during the winter (except for snow scenes).
• Excessively bright (or dark) or backlighted subjects
may require plus (or minus) 1-stop lens opening adjustments.
* CR-56 (Fujifilm) is equivalent to E-6 processing.
1
FUJIFILM DATA SHEET • FUJICHROME Sensia 200 [RM]
Low Light Exposure
Light
Conditions
Fine Weather
Daytime
Indoor
Scenes
Indoor Scenes
(Under
Fluores- cent
Light)
Lens
Aperture
f/2.8 to 4
Shutter
Speed (Sec.)
NOTES
Stage
or
Evening
Snow
Scenes
Scenes
1/30
Since light intensities for indoor scenes varies widely
from location to location, the data above should be
used only as a guide.
Daylight
Under normal daylight conditions, color balancing filters
are not necessary, but the following exposure conditions may require the indicated filters.
Subject Conditions
Open shade in fair weather and
shaded landscapes.
Bright distant views, snow
scenes, seaside locations,
aerial shots and open
landscapes.
Filter
UV Filter
No.2C*
(SC-39 or
SC-40)**
Exposure
Correction
None
Close-ups of plants and
subjects having bright colors.
Excessively high or low subject color temperatures may
require the following filters and exposure corrections.
Subject Conditions
High Color Temperature :
Cloudy weather landscapes or
portraits in open shade in clear
weather.
Low Color Temperature :
Morning and evening twilight
scenes and portraits.
*
**
***
****
Filter
Exposure
Correction
No.81A*
(LBA-2)***
+1/3
stop****
No.82A* or
No.82C*
(LBB-2 or
LBB-4)***
+1/3 to
+2/3
stop****
Wratten Filters
Fuji Sharp-cut Filter
Fuji Light Balancing Filter
A "+" followed by a number indicates the required
increase in lens opening.
Electronic Flash
• Electronic flash produces light similar to daylight, so
filters are not normally needed. However, the possibility of undesirable effects on color balance, due to
various factors (differences in equipment, amount of
use, etc.) should be taken into consideration. Test
exposures are recommended.
• The use of a flash meter is advisable, but the following formula can also be used to obtain a satisfactory
lens opening.
2
Electronic Flash Guide Number
Lens
(at ISO 200)
Aperture =
Electronic Flash-to-Subject Distance
(f-number)
(meters)
• Set the film speed at ISO 200. Since the amount of
light reflected onto the subject from surrounding surfaces will differ with the conditions, refer to the flash
unit instructions.
Daylight Photoflood / Photo-Reflector Lamps
• Daylight-type photoflood or photo-reflector lamp output may be lower than that indicated by an exposure
meter, so it is advisable to compensate for this by increasing exposure time or the lens opening. Whenever
possible, test exposures are recommended.
• Other factors requiring consideration when determining the exposure time are lamp configuration, use duration and line voltage, as they may affect lamp output
and color balance
Fluorescent Lamps
• The use of the following combinations of color compensating filters is advisable when photographing
under fluorescent lighting.
• For exacting work, however, test exposures are recommended because lamp brand and age may affect
light output and color balance.
Fluorescent
Lamp Type
White Daylight Cool White Warm White
(D)
(W)
(CW)
(WW)
Color Compensating Filters*
25M 30R+10M
Exposure
Corrections**
+2/3
+1 1/3
30M
No.80B+
10M + 10R
+1
+2
(Exposure time: 1/2 second)
* Kodak Color Compensating Filters (or Fuji CC Filters) are recommended.
** Exposure correction values include filter exposure factors.
These values are added to normal exposure meter readings.
A "+" followed by a number indicates the required increase in
lens opening.
NOTES • Use a shutter speed slower than 1/30 second.
• For shutter speeds of 64 seconds or more, exposure adjustments will be necessary to compensate
for reciprocity-related failure.
Tungsten Lamps
• A Wratten Filter No.80A (or Fuji Light Balancing Filter
LBB-12) is required when using 3200K tungsten
lighting. A 1 2/3-stop larger lens opening is also
required.
• With household tungsten lamps, a Wratten Filter
No.82A (or Fuji Light Balancing Filter LBB-2) will
compensate for the lower color temperature. A 2stop larger lens opening is required.
FUJICHROME Sensia 200 [RM] • FUJIFILM DATA SHEET
Mixed Light Sources
Under mixed light conditions, the basic filter configuration should suit the main light source. In the case of
cameras with TTL metering, there is no need for additional exposure compensation for any CC filter(s) used.
5.
LONG EXPOSURE COMPENSATION
No exposure correction or color balance compensation
is required for exposures within a shutter speed range
of 1/4000 second to 32 seconds. However, for exposures of one minute or longer, reciprocity-related color
balance and exposure compensations are required.
Exposure Time 1/4000 – 32 sec. 1 min. 2 – 4 min. 8 min.
Color Compensating Filter
Exposure
Corrections*
5G
7.5G
+2/3
+1
None
Not
recommended
* Exposure correction values include filter exposure factors.
These values are added to unfiltered exposure meter readings.
A "+" followed by a number indicates the required increase in
the lens opening.
6.
EXPOSURE PRECAUTIONS
With artificial light, such as electronic flash, photoflood,
fluorescent, tungsten, mercury vapor, etc., the lamp
output and color temperature may be affected by such
factors as brand, age of equipment and line voltage.
Reflectors and diffusers can also influence light intensity
and color temperature.
7.
•
•
•
•
FILM HANDLING
Expose film before the expiration date indicated on
the film package and process as soon as possible
after exposure.
When loading and unloading roll film, avoid direct
sunlight. If there is no shade, shield the film from
the sun with your body.
X-ray equipment used to inspect carry-on baggage
at airport terminals can cause film fogging. Both
exposed and unexposed films should be removed
for manual inspection.
Film fogging may occur near X-ray equipment used
in hospitals, factories, laboratories and other locations. Always keep film away from possible
sources of radiation.
8.
FILM STORAGE
Unprocessed Film
• Storing exposed or unexposed film under hot and
humid conditions may adversely affect the speed,
color balance and physical properties of the film.
Store film under the following conditions.
 O Short-to-medium-term storage :

Below 15°C (59°F) ........ (Refrigerator)
 O Long-term storage :

Below 0°C (32°F) .......... (Freezer)

• Building materials, finishes used on newly manufactured furniture, paints and bonding agents may
produce gases which could affect photographic
film. Do not store film, lightproof boxes of film,
loaded cameras or film holders near these materials.
• Before use, films taken from cold storage should be
allowed to stand at room-temperature for over 3
hours for refrigerated film, and over 6 hours for frozen film.
Processed Film
Exposure to light, high temperature and humid conditions can cause color changes in processed films.
Therefore, place such films in mounts or sleeves and
store them in a dark, dry, cool and well ventilated location under the following conditions.
 O Medium-term storage:

Below 25°C (77°F) at 30% to 60% RH
 O Long-term storage :

Below 10°C (50°F) at 30% to 50% RH

NOTE
9.
As with all color dyes, those used in this film will discolor or fade with time.
PROCESSING
This film is designed for processing by Kodak E-6,
Fujifilm CR-56, or equivalent chemicals.
10.
LIGHT SOURCES FOR VIEWING
Take care to use a standard viewer, as visual responses
differ with light source quality and brightness.
11.
PRINTS
Slides can be made into normal prints on FUJICHROME
paper or into Super Digital Prints.
3
FUJIFILM DATA SHEET • FUJICHROME Sensia 200 [RM]
12.
PROCESSED FILM EDGE MARKINGS
• 135 Size
13.
FILM STRUCTURE
* These layers become colorless and transparent after processing.
14.
DIFFUSE RMS GRANULARITY VALUE
............ 13
Micro-densitometer Measurement Aperture : 48 µm in diameter
Sample Density : 1.0 above minimum density
15.
Chart Contrast
Chart Contrast
4
RESOLVING POWER
1.6 : 1 ............ 60 lines/mm
1000 : 1 .......... 140 lines/mm
FUJICHROME Sensia 200 [RM] • FUJIFILM DATA SHEET
16.
CHARACTERISTIC CURVES
17.
SPECTRAL SENSITIVITY CURVES
* Sensitivity equals the reciprocal of the exposure (J/cm2)
required to produce a specified density.
18.
MTF CURVE
19.
SPECTRAL DYE DENSITY CURVES
5
FUJIFILM DATA SHEET • FUJICHROME Sensia 200 [RM]
NOTICE The data herein published were derived from materials taken from
general production runs. However, as Fujifilm is constantly upgrading the quality of
its products, changes in specifications may occur without prior notice.
6
FUJI PHOTO FILM CO., LTD.
26-30, Nishiazabu 2-chome, Minato-ku, Tokyo 106-8620, Japan
Ref. No. AF3-080E (EIGI-00.8-HB•10-1●) Printed in Japan