AF3-147E
FUJICOLOR QuickSnap Marine
(EC)
1. INTRODUCTION
FUJICOLOR QuickSnap Marine is certain to make a "splash" with marine sports fans.
Loaded with high-speed, fine-grain SUPERIA X-TRA 800 film, this waterproof camera lets you
take photographs in and on water or elsewhere, even on overcast days.
The perfect companion for beach, field and stream activities — anywhere an ordinary camera
might be damaged by sand, water or excess humidity.
QuickSnap Marine lets you enjoy water sports, skiing, fishing or climbing.
2. FEATURES
(1) Can be used at depths of up to 10m underwater
Completely waterproof, QuickSnap Marine takes great photos at depths of up to 10m. And
the added sensitivity of SUPERIA X-TRA 800 lets you shoot in clear water even when the sky
is overcast.
(2) Easy to hold and very easy to operate
A big-size lever-type shutter release on the front of the camera and a top-mounted film
advance knob makes it very easy to operate QuickSnap Marine even with gloved hands —
something you will appreciate underwater or on the slopes. A rubber wrist strap makes
sure you and your QuickSnap stay together whenever the going gets tough.
(3) Exceptional image quality
Loaded with 27 exposures of fine-grain SUPERIA X-TRA 800 film, QuickSnap Marine
produces crisp, vivid colors and excellent sharpness, setting a new standard for one-timeuse camera image quality.
(4) Waterproof seal
QuickSnap Marine comes in a sturdy transparent O-ring-sealed case which protects the
film and mechanism from water, humidity, dust, dirt and sand.
–1–
FUJIFILM PRODUCT INFORMATION BULLETIN • FUJICOLOR QuickSnap Marine
3. SPECIFICATIONS
Item
FUJICOLOR QuickSnap Marine
• Film
FUJICOLOR SUPERIA X-TRA 800 (ISO 800/30°)
135 - 27 exp.
• Lens
32 mm f/10, fixed-focus lens
• Shutter Speed
1/125 second
• Exposure Conditions
Outdoors on sunny or overcast days
Open air:
• Subject-to-Lens Distance
Beyond 1 meter
(Outdoor daylight bright or cloudy-bright)
Submerged: Between 1 to 3 meters
(Outdoor bright daylight clear water)
• Finder (of the main unit)
Inverted Galilean-type plastic lens finder
• Water Resistance (Pressure)
Depth of up to 10 meters
• Size
73 (H) x 133 (W) x 42 (D) mm
• Weight
170 g
FUJICOLOR SUPERIA X-TRA 800 Specifications and Edge Markings
(Specifications)
(Edge Markings)
Item
Size
• Code
CZ
• Speed
ISO 800/30°
• Type
Daylight
• Process
CN-16, CN-16Q,
CN-16FA, CN-16L,
CN-16S, C-41
or equivalent
chemicals
• Size
135 – 27 exp.
• Production
Number
L01 and above
135
–2–
Item
• Edge Stripe
One green broken line
and one red solid line
on both sides
• Type Designation
800
• Generation
Number
CZ-5
• Latent Image
Bar Code
35-1
FUJICOLOR QuickSnap Marine • FUJIFILM PRODUCT INFORMATION BULLETIN
4. HANDLING PROCEDURES FOR LABORATORY PROCESSING
Opening the Waterproof Housing and Removing the Main Unit
1. Insert a screwdriver from the side into the slot on the strap-side of the housing and push
downward on the back cover.
2. After removing the rear cover, insert the screwdriver into the slot on the side opposite the
strap and lift up the main unit.
Screwdriver
Lift up main unit.
3. Remove the main unit by rotating the bottom part outward.
Rotate the bottom outward.
The procedure for removing the film cartridge is identical to that for QuickSnap Super.
CAUTION
• When using a screwdriver or similar tool, exercise caution so that the pointed
end of the tool will not cause hand injuries.
• Always wear goggles when removing the film cartridge because fragments of
broken plastic may fly off.
–3–
FUJIFILM PRODUCT INFORMATION BULLETIN • FUJICOLOR QuickSnap Marine
5. PROCESSING LABORATORY HANDLING
Basic handling procedures are no different from those for other 35 mm films.
Since FUJICOLOR QuickSnap Marine is designed to use the "00" "0" & "E" frames for image
exposures, it is important to exercise caution relative to the film leading end.
Film Cartridge Design
The basic color is green.
6. POINTS PERTINENT TO CONTINUOUS REEL, HANGER AND
MINILAB PROCESSING
The procedures used for film tongue extraction, cutting and check tape application are almost
the same as for QuickSnap Super. Follow the handling method shown in 1 to 3 below.
The film extraction length, leading end cut length and check tape length all together, must be
no longer than 120 mm. The film should not be extracted from the cartridge beyond 120 mm.
7. PROCESSING AND PRINTER CONDITIONS
7-1 Processing Conditions
Process the film with CN-16, CN-16Q, CN-16FA, CN-16L, CN-16S, C-41 or equivalent processing chemicals.
7-2 Automatic Printer Conditions
Use the same channel setting as for SUPERIA X-TRA 800.
8. PARTS RECYCLING
In line with Fujifilm's efforts to protect the environment, photofinishers are kindly urged to send
the used camera bodies and waterproof cases to Fujifilm for recycling.
NOTICE The data herein published were derived from materials taken from
general production runs. However, as Fujifilm is constantly upgrading the
quality of its products, changes in specifications may occur without prior notice.
FUJI PHOTO FILM CO., LTD.
26-30, Nishiazabu 2-chome, Minato-ku, Tokyo 106-8620, Japan
–4–
Ref. No. AF3-147E (EIGI-03.1-HB•1-1¸) Printed in Japan