.
Data Sheet
Cisco Aironet 1300 Series Outdoor Access Point or Bridge
Product Overview
®
®
The Cisco Aironet 1300 Series Outdoor Access Point or Bridge (Figure 1) is an 802.11g access point and bridge
that provides high-speed and cost-effective wireless connectivity between multiple fixed or mobile networks and
clients. Building a metropolitan-area wireless infrastructure with the Cisco Aironet 1300 Series provides deployment
personnel with a flexible, easy-to-use solution that meets the security requirements of wide-area networking
professionals. The Cisco Aironet 1300 Series can be deployed as an autonomous access point or bridge, providing
intelligent network services as a standalone device. Alternatively, the Cisco Aironet 1300 Series can be deployed as
part of the Cisco Unified Wireless Network, managed centrally by a Cisco wireless LAN controller.
Figure 1.
Cisco Aironet 1300 Series
The Cisco Aironet 1300 Series supports the 802.11g standard—providing 54-Mbps data rates with a proven, secure
technology while maintaining full backward compatibility with legacy 802.11b devices. It is delivered in a compact,
rugged enclosure for deployment in outdoor environments, and is available in two versions. The Cisco Aironet 1300
Series with integrated antenna can be quickly installed to provide a LAN bridge to a remote site or multiple sites. The
1300 Series with antenna connectors supports a variety of Cisco 2.4-GHz antennas, providing range and coverage
versatility.
The Cisco Aironet 1300 Series is available either as part of the Cisco Unified Wireless Network or as an autonomous
access point or bridge. The Cisco Unified Wireless Network is a comprehensive solution that delivers an integrated,
end-to-end wired and wireless network. Using the radio and network management features of the Cisco Unified
Wireless Network for simplified deployment, the Cisco Aironet 1300 Series extends the security, scalability,
reliability, ease of deployment, and manageability available in wired networks to the wireless LAN. Unified access
points operate with the Lightweight Access Point Protocol (LWAPP) and work in conjunction with Cisco wireless LAN
controllers and the Wireless Control System (WCS). When configured with LWAPP, the Cisco Aironet 1300 Series
can automatically detect the best-available Cisco wireless LAN controller and download appropriate policies and
configuration information with no hands-on intervention.
®
Autonomous access points are based on Cisco IOS Software and may optionally operate with the CiscoWorks
Wireless LAN Solution Engine (WLSE). Autonomous access points, along with the WLSE, deliver a core set of
features and may be field-upgraded to take advantage of the full benefits of the Cisco Unified Wireless Network as
requirements evolve. As an autonomous access point or bridge, the Cisco Aironet 1300 Series may be configured to
operate as a wireless access point, bridge, or a workgroup bridge.
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 14
Data Sheet
Users and Applications
The Cisco Aironet 1300 Series can provide outdoor wireless access, an ongoing savings of leased-line expenses, a
method to connect networks despite physical barriers such as lakes or highways, and rapid deployment of network
connections—often while waiting on other facilities, such as fiber-optic installations. The types of organizations that
will benefit from the advantages of the Cisco Aironet 1300 Series include education, enterprise, government,
healthcare, military, public safety, transportation, and WLAN service providers. These organizations have a variety of
possible applications, as shown in Figure 2 and described in the following paragraphs.
Campus Networks
Whether the deployment is in a typical college campus or corporate offices with multiple buildings, IT professionals
are faced with interconnecting local area networks around and in between each of the buildings. These LANs require
cost-effective, high-bandwidth connections with seamless mobility throughout the WLAN. They also require the
flexibility and control that is unavailable through leased lines or that would otherwise require trenching for new cable
installations. The Cisco Aironet 1300 Series can be used as an outdoor access point, either operating with the Cisco
wireless LAN controller and WCS or autonomously as an intelligent access point. It can also be used as an
autonomous wireless bridge to connect remote buildings to the LAN.
Nomadic Networks and Users
More and more, networks are “on the move.” Vehicles such as buses, trains, ambulances, and patrol cars are being
equipped with their own LAN-supported devices, including notebooks, personal digital assistants (PDAs), cameras,
and scanners. These mobile networks provide new passenger services, improved public service, and operational
efficiency but they need to be interconnected to enable information-sharing and more informed decision-making. The
Cisco Aironet 1300 Series can operate in autonomous mode as a workgroup bridge connecting in-vehicle devices to
Cisco Aironet access points and bridges that are fixed throughout the service area.
Outdoor Public Access
The proliferation of WLAN hotspots has allowed users to stay connected while in hotels, airports, and even coffee
shops. As more users desire ubiquitous connectivity, outdoor hotspots are being added—and some include multiple
city blocks or even town centers. These outdoor hotspots can be cost-effectively deployed with the Cisco Aironet
1300 Series unified or autonomous access points.
Temporary Networks
The variety of temporary solutions is limitless, with applications such as remote military campaigns, short-term office
leases, temporary buildings such as trailers, or even parking lot tent sales. These deployments require a temporary
network infrastructure that is rugged, portable, easy to install, and flexible. The Cisco Aironet 1300 Series can be
quickly deployed, with complete functionality packaged in the integrated antenna version, or with a selection of easyto-install remote antennas for the connectorized version.
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 14
Data Sheet
Figure 2.
Cisco Aironet 1300 Series Applications Example
Benefits
Industry-Leading Performance
●
Data rates of 54 Mbps in the 2.4-GHz band
●
Bridge range of 20 miles (32 kilometers [km]) at 11 Mbps
●
Aggregate throughput approaching 28 Mbps
●
Maximum transmit power of 100 milliwatts (mW) for 802.11b and 30 mW for 802.11g. Maximum power setting
will vary according to individual country regulations.
●
For vehicle-installed deployments, over 100 km per hour speeds at 12 and 24 Mbps with 128-byte packets at
1 percent packet error rate (PER) (workgroup bridge mode connected to a Cisco Aironet access point or
bridge)
●
Support for antenna diversity
Low Total Cost of Ownership
●
Compelling return on investment (ROI) compared to cable installation or ongoing leased-line fees
●
Low bridging-system cost
●
Low outdoor access-point system cost
●
Ability to reuse existing Cisco Aironet Series 350 Wireless Bridges for low upgrade costs
●
Investment protection with future Cisco IOS Software upgrades
Flexible and Easy to Install
●
The Cisco Unified Wireless Network simplifies wireless LAN deployment and management by providing clear
visibility and dynamic control of the RF environment.
●
Convenient LEDs provide bridge alignment feedback and diagnostics.
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 14
Data Sheet
●
Quick-hang mounting bracket allows for an easy installation process; roof and wall mounting kits offer more
mounting options.
●
Rapid deployment, redeployment, and recommissioning can be achieved with no reliance upon third-party
service providers or a lengthy license or trenching process.
●
Multiple, configurable radio network roles enable point-to-point and point-to-multipoint bridging.
●
Wide DC power-input range allows a variety of power supply options such as solar power or vehicle power
(+10 to +48 volts direct current [VDC]).
●
Supports a wide operating-temperature range of –22°F to 131°F (–30° to +55°C).
●
Meets NEMA 4 and IP56 specifications for harsh environments.
●
Supports captured antennas for easy mounting and support for external antennas, including existing Cisco
Aironet 2.4-GHz antennas.
Award-Winning Security
The Cisco Aironet 1300 Series has achieved National Institute of Standards and Technology (NIST) FIPS 140-2 level
2 validation and is in process for Common Criteria validation under the National Information Assurance Partnership
(NIAP) program.
The Cisco Aironet 1300 Series supports 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA, and numerous Extensible
Authentication Protocol (EAP) types. WPA and WPA2 are the Wi-Fi Alliance certifications for interoperable,
standards-based WLAN security. These certifications support IEEE 802.1X for user-based authentication, Temporal
Key Integrity Protocol (TKIP) for WPA encryption, and Advanced Encryption Standard (AES) for WPA2 encryption.
These certifications help to ensure interoperability between Wi-Fi-certified WLAN devices from different
manufacturers.
The Cisco Aironet 1300 Series hardware-accelerated AES encryption supports enterprise-class, government-grade
secure encryption over the WLAN without compromising performance. IEEE 802.1X authentication helps to ensure
that only authorized users are allowed on the network. Backward compatibility and support for WPA client devices
running TKIP, the RC4 encryption algorithm, is also supported by the Cisco Aironet 1300 Series.
Cisco Aironet 1300 Series access points operating with LWAPP support Cisco Unified Intrusion Detection System or
Intrusion Prevention System (IDS/IPS), which is part of the Cisco Self-Defending Network and is the industry’s first
integrated wired and wireless network security solution. The Cisco Unified IDS/IPS takes a comprehensive approach
to security—at the wireless edge, wired edge, WAN edge, and through the data center. When a trusted client acts
maliciously, the Cisco wired IDS detects the attack and sends shun requests to the Cisco wireless LAN controllers,
which will then disassociate the client device. Cisco Unified IDS goes beyond simple fire walling. If a user is allowed
to access a specific server, but is not allowed to access a particular directory on the server, the anomalous behavior
is detected and mitigated.
Autonomous or unified Cisco Aironet 1300 Series Access Points support management frame protection for the
authentication of 802.11 management frames by the wireless network infrastructure. This allows the network to
detect spoofed frames from access points or malicious users impersonating infrastructure access points. If an
access point detects a malicious attack, an incident will be generated by the access point and reports will be
gathered on the controller, Cisco WCS, or CiscoWorks WLSE.
Product Architecture
A flexible outdoor wireless-bridge or access-point solution is provided through the combination of the Cisco Aironet
1300 Series, a power injector, and options for both antennas and mounting. Figure 3 shows how the units connect.
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 4 of 14
Data Sheet
Figure 3.
Network Diagram with Power Injector
Cisco Aironet 1300 Series
The Cisco Aironet 1300 Series provides the 802.11g interface for access-point capability or bridge connections. By
placing the unit outdoors, close to the antenna, you can minimize the wireless cable losses—thereby maximizing the
range of the network. The unit is available with either an integrated antenna, or with connectors for external antennas
(Figure 4). The high-gain, integrated antenna is designed for easy installations of point-to-point links or non-root
nodes of point-to-multipoint networks as an autonomous bridge. The nonintegrated antenna version provides
professional installers with an RP-TNC connector that allows the deployment of omnidirectional, sector, or high-gain
dish antennas for specific application requirements.
Figure 4.
Cisco Aironet 1300 Series Connector Options
Power Injector
The Cisco Aironet Bridge Power Injector converts the standard 10/100BASE-T Ethernet interface that is suitable for
weather-protected areas to a dual F-Type connector interface for coaxial cables that are more suitable for harsh
outdoor environments. The power injector also provides power to the outdoor unit over the same cables with a
power-discover feature and surge protection. To support longer cabling from your wired switch or router, the power
injector enables total cable runs up to 200 meters (Category 5 [Cat5] and coaxial). The Cisco Aironet 1300 Series
ships with the Cisco Aironet Power Injector LR2 (Figure 5) and an AC power supply.
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 5 of 14
Data Sheet
Figure 5.
Cisco Aironet Power Injector AIR-PWRINJ-BLR2/AIRPWRINJ-BLR2T
The optional Cisco Aironet Power Injector LR2T takes power from any +12 to +40 VDC source not supplied by
Cisco. Typically, the DC source is a vehicle or solar-power source (Figure 6). This power injector provides the
flexibility needed when an AC power source is not available.
Figure 6.
Network Diagram with Optional Power Injector
Mounting Hardware and Antennas
In addition to having a variety of antennas available from Cisco, the Cisco 1300 Series also has different mounting
options (Figure 7). These optional mounting kits are available for mounting to a roof, wall, or pole. The quick-hang
mounting bracket enables a simple, one-person installation. For more information on available antennas, please
refer to the Cisco Aironet Antennas and Accessories Data Sheet and Reference Guide:
●
Data Sheet:
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008022b11b.h
tml
●
Reference Guide:
http://www.cisco.com/en/US/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.h
tml
Figure 7.
Cisco Aironet 1300 Series Mounting Hardware and Antennas
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 6 of 14
Data Sheet
Features
The Cisco Aironet 1300 Series access point or bridge provides the following features.
Antenna Alignment Assistance
The autonomous Cisco Aironet 1300 Series provides an autoconfiguration and installation mode for quick
deployment of point-to-point links without the need for configuration through Telnet, FTP, or Simple Network
Management Protocol (SNMP). This mode provides LEDs with signal-strength information used in the installation
and alignment process. As a result, installers are free to perform their installation process and verify the link quality
without knowledge of Cisco IOS Software or data networking.
Automatic RF Configuration
Under the Cisco Unified Wireless Network, radio resource management provides automatic configuration of RF
parameters for access points such as the Cisco Aironet 1300 Series Access Points. The result is a coordinated RF
plan for access points under the span of the Cisco wireless LAN controller, which also recognizes the presence of
other RF emitting devices. This minimizes interference to and from neighboring access points, ensuring optimal
network capacity.
Seamless Layer 2 and Layer 3 Roaming
The Cisco Aironet 1300 Series provides fast secure roaming of wireless clients and autonomous non-root bridges
and workgroup bridges. In both the unified access point and the autonomous access point, the encryption keys for
mobile devices are cached locally, allowing the mobile device to roam between access points while remaining
authenticated to the network. This significantly reduces roaming time by eliminating the need to conduct the four-way
handshake with each roam. Autonomous non-root bridges and workgroup bridges also scan in the background to
search for alternative Cisco Aironet access points and bridges that mobile device may be roaming to, which also
reduces roaming time.
Support for Port Aggregation Protocol and Cisco Fast EtherChannel Technology
Bandwidth can be increased between bridged networks through the aggregation of multiple autonomous bridges at
®
each site via Cisco Fast EtherChannel technology, Port Aggregation Protocol (PAgP), or routing protocols.
Wireless Link-Distance Adjustment
For an autonomous Cisco Aironet 1300 Series device, the link-distance parameter allows the user to tune the
Carrier-Sense Multiple Access/Collision Avoidance (CSMA/CA) parameters for the particular range in use to
maximize performance.
Wireless Packet Concatenation
The concatenation of smaller packets into larger ones allows autonomous Cisco Aironet 1300 Series access point or
bridge to more efficiently use the wireless medium and provide higher overall data throughputs.
Wireless Programmable Clear-Channel Assessment
With a programmable clear-channel assessment, an autonomous Cisco Aironet 1300 Series access point or bridge
can be configured to the particular background-interference level found in your environment. This provides reduced
contention overhead with other wireless systems.
Summary
The Cisco Aironet 1300 Series is a flexible outdoor 802.11b and 802.11g access point or bridge that provides highspeed and cost-effective wireless connectivity between multiple fixed or mobile networks and clients.
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 7 of 14
Data Sheet
Product Specifications
Link Roles and Product Compatibility
Table 1 outlines the link roles in which the Cisco Aironet 1300 Series can operate, and identifies the products that it
is compatible with in the particular role.
Table 1.
Link Role and Product Compatibility
Role
Applications
Unified or
Autonomous
Architecture
Access Point
Engineered specifically for harsh outdoor
environments, yet also capable in indoor deployments,
the Cisco Aironet 1300 Series is ideal for WLANs
requiring outdoor coverage. The Cisco Aironet 1300
Series is Wi-Fi certified as an access point and also
supports the innovative features available with Cisco
Aironet and Cisco Compatible client devices.
Unified or
Autonomous
● Compatible with any Wi-Fi certified WPA or
WPA2 client device for basic capability
● Compatible with Cisco Aironet clients and
Cisco Compatible clients for extended
capability
Bridge
The Cisco Aironet 1300 Series supports either point-to- Autonomous
point or point-to-multipoint configurations to costeffectively interconnect remote, temporary, or mobile
networks. It can serve as an upgrade or replacement to
the Cisco Aironet 350 Wireless Bridge by providing
over-the-air compatibility with existing Cisco Aironet
350 Series Wireless Bridges. While in bridge mode,
client associations are also accepted—effectively
providing simultaneous bridge and access-point
capability.
Compatible with Cisco Aironet 1300 Series and
350 Series Wireless Bridges
Workgroup
Bridge
There is no hard/soft limit on the number of devices
you can have, however we only recommend up to a
maximum of 20 devices.
Supports operation with Cisco Aironet access
points and Cisco bridges
Autonomous
Compatibility
Protocols
Table 2 lists the protocols supported by the Cisco Aironet 1300 Series.
Table 2.
Protocols
Protocols
Description
Air Interface
Standard
IEEE 802.11b or IEEE 802.11g
Frequency Band
Note: Autonomous bridge mode has enhancements to the standard to allow longer-range bridging communications.
● 2.412 to 2.462 GHz (FCC)
● 2.412 to 2.472 GHz (ETSI)
● 2.412 to 2.472 GHz (TELEC)
Wireless
Modulation
802.11b
● Direct Sequence Spread Spectrum (DSSS):
◦
Differential Binary Phase Shift Keying (DBPSK) at 1 Mbps
◦
Differential Quadrature Phase Shift Keying (DQPSK) at 2 Mbps
◦
Complementary Code Keying (CCK) at 5.5 and 11 Mbps
802.11g
● Orthogonal Frequency Divisional Multiplexing (OFDM):
◦
BPSK at 6 and 9 Mbps
◦
QPSK at 12 and 18 Mbps
◦
16-quadrature amplitude modulation (QAM) at 24 and 36 Mbps
◦
64-QAM at 48 and 54 Mbps
Media Access
Protocol
Carrier-Sense Multiple Access with Collision Avoidance (CSMA/CA)
Lightweight Access
Point Protocol
A network protocol for lightweight access points that also provides for centralized management.
Operating Channels 802.11b/g
● ETSI: 13
● Americas: 11
● TELEC (Japan): 13
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 8 of 14
Data Sheet
Protocols
Description
Nonoverlapping
Channels
3
Security—Bridge
Role*
Cisco Wireless Security Suite, including:
Authentication
802.1X support including LEAP to yield mutual authentication and dynamic per-user, per session encryption keys
Encryption
● Cisco TKIP or WPA TKIP; key hashing (per-packet keying), Message Integrity Check (MIC) and broadcast key rotation
● AES (802.11i)
Security—Access
Point Role
Cisco Wireless Security Suite supporting WPA and WPA2, including:
Authentication
● Management frame protection provides for the authentication of 802.11 management frames by the wireless network
infrastructure. This allows the network to detect spoofed frames from access points or malicious users impersonating
infrastructure access points. If an access point detects a malicious attack, an incident will be generated by the access
points and reports will be gathered on the Cisco wireless LAN controller, Cisco WCS, or CiscoWorks WLSE.
● 802.1X support including Cisco LEAP, Protected EAP-Generic Token Card (PEAP-GTC), PEAP-Microsoft Challenge
Authentication Protocol Version 2 (MSCHAPv2), EAP Message Digest 5 (EAP MD5), EAP-Transport Layer Security (EAPTLS), EAP-Tunneled TLS (EAP-TTLS), EAP-Subscriber Identity Module (EAP-SIM), and EAP-Flexible Authentication via
Secure Tunneling (EAP-FAST) to yield mutual authentication and dynamic per user, per-session encryption keys
Encryption
● WPA: Cisco TKIP or WPA TKIP; key hashing (per-packet keying), MIC and broadcast key rotation
● WPA2: AES (802.11i)
Security—
Workgroup Bridge
Role*
Cisco Wireless Security Suite, including:
Authentication
● 802.1X support including Cisco LEAP to yield mutual authentication and dynamic per-user, per session encryption keys
Encryption
● Cisco TKIP or WPA TKIP; key hashing (per-packet keying), MIC and broadcast key rotation
● AES (802.11i)
SNMP Compliance
Versions 1 and 2
* Cisco Aironet 1300 Series can operate as a workgroup bridge or wireless bridge when it is an autonomous device. When the
Cisco Aironet 1300 Series is operating under the Cisco Unified Wireless Network architecture, it only operates as an access point.
Components
Table 3 lists the components available for the Cisco Aironet 1300 Series.
Table 3.
Components
Components
Description
Power Injector LR2
The power injector converts the standard 10/100BASE-T Ethernet Cat5 RJ-45 interface that is suitable for weather-protected
areas to a dual F-Type connector interface for dual coaxial cables that are more suitable for harsh outdoor environments.
While providing a 100BASE-T interface to the Cisco Aironet 1300 Series, the power injector also provides power to the unit
over the same cables with a power discovery feature that protects other appliances from damage should they accidentally be
connected. As an added benefit to the installer, the automatic medium-dependent interface crossover (Auto-MDIX) feature is
built in, allowing the dual cables to be swapped while maintaining the same capability. To support longer cable runs from your
network switch or router, the power injector is designed to accommodate up to a 100 meter coaxial cable run plus 100 meters
of indoor Cat5 cable—enabling total cable runs up to 200 meters. Lightning and surge protection is also included at the FType connector interface to provide added protection to your network devices. The power injector requires a 48V DC source
supplied by Cisco.
Power Injector LR2T
The Power Injector LR2T supports all the capabilities of LR2. It is designed for use in transportation applications and operates
with an input voltage range of +12 to +40V DC. The DC source is provided by the user. The LR2T can therefore be vehicle- or
solar-powered.
Power Supply
● 48V DC supply for AIR-PWRINJ-BLR2=
● User-supplied 12 to 40V DC source for AIR-PWRINJ_BLR2T=. Could require an external load-dump-module for
automotive and bus installations.
AIR-BR1310G- x-K9
or AIR LAP1310G-xK9 Integrated
Antenna
● Vertical polarization
● 13-dBi gain
● 36° E-plane by 38° H-plane (3-dB beam width)
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 9 of 14
Data Sheet
Interfaces
Table 4 lists the Cisco Aironet 1300 Series interfaces.
Table 4.
Interfaces
AIR-BR1310G-x-K9
AIR-PWRINJ-BLR2
AIR-BR1310G-x-K9-R
AIR-PWRINJ-BLR2T
AIR-LAP1310G-x-K9
AIR-LAP1310G-x-K9R
Status LEDs
Four LEDs: Install, Radio, Status, and Ethernet
One bicolor LED showing power status
F-Type Connectors
Dual coaxial cable carries full-duplex Ethernet, DC
power, and full-duplex console port (RS-232 connection)
Dual coaxial cable carries full-duplex Ethernet, DC power, and fullduplex console port (RS 232 connection)
● AIR-BR1310G-x-K9 or AIR-LAP1310G-x-K9: Air
interface (integrated directional antenna)
● AIR-BR1310G-x-K9-R or AIR-LAP1310G-x-K9R:
Two RP-TNC type connectors for external antennas
Antenna Interface
—
DC Power
—
One two-pin Switchcraft connector (with threaded locking sleeve)
and matching connector
RJ-45 Interface
—
One RJ-45 connector for console-port access (9600 bps only), a
second RJ-45 connector for 10/100BASE-T LAN interface
Grounding Lugs
Two grounding lugs for lightening protection.
—
Memory Requirements
Table 5 lists the memory specifications for the Cisco Aironet 1300 Series.
Table 5.
Memory Requirements
8 MB of Flash Memory
Memory space for future firmware upgrades to support new 802.11 standards and advanced features.
Performance
Table 6 lists the Cisco Aironet 1300 Series performance capabilities.
Table 6.
Performance Capabilities
Available Transmit Power
Settings
AIR-BR1310G-A-K9 or AIR-LAP1310G-A-K9
AIR-BR1310G-A-K9-R or AIR-LAP1310G-A-K9R
802.11b:
● 100 mW (20 dBm)
● 50 mW (17 dBm)
802.11b:
● 100 mW (20 dBm)
● 50 mW (17 dBm)
● 30 mW (15 dBm)
● 20 mW (13 dBm)
● 10 mW (10 dBm)
● 30 mW (15 dBm)
● 20 mW (13 dBm)
● 10 mW (10 dBm)
● 5 mW (7 dBm)
● 1 mW (0 dBm)
● 5 mW (7 dBm)
● 1 mW (0 dBm)
802.11g:
● 30 mW (15 dBm)
● 20 mW (13 dBm)
802.11g:
● 30 mW (15 dBm)
● 20 mW (13 dBm)
● 10 mW (10 dBm)
● 5 mW (7 dBm)
● 10 mW (10 dBm)
● 5 mW (7 dBm)
● 1 mW (0 dBm)
● 1 mW (0 dBm)
Note: Maximum power setting will vary according to individual country regulations.
Maximum Operational
Receive Level
–20 dBm
–20 dBm
Maximum Survivable
Receive Level
10 dBm
10 dBm
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 10 of 14
Data Sheet
AIR-BR1310G-A-K9 or AIR-LAP1310G-A-K9
Receive Sensitivity
(10 Percent with 3200 Byte
Packets)
AIR-BR1310G-A-K9-R or AIR-LAP1310G-A-K9R
● 1 Mbps: –94 dBm
● 2 Mbps: –91 dBm
● 1 Mbps: –94 dBm
● 2 Mbps: –91 dBm
● 5.5 Mbps: –89 dBm
● 11 Mbps: –85 dBm
● 5.5 Mbps: –89 dBm
● 11 Mbps: –85 dBm
● 6 Mbps: –90 dBm
● 9 Mbps: –89 dBm
● 6 Mbps: –90 dBm
● 9 Mbps: –89 dBm
● 12 Mbps: –86 dBm
● 18 Mbps: –84 dBm
● 12 Mbps: –86 dBm
● 18 Mbps: –84 dBm
● 24 Mbps: –81 dBm
● 36 Mbps: –77 dBm
● 24 Mbps: –81 dBm
● 36 Mbps: –77 dBm
● 48 Mbps: –73 dBm
● 54 Mbps: –72 dBm
● 48 Mbps: –73 dBm
● 54 Mbps: –72 dBm
Maximum Bridge Relative
Velocity (AutonomousMode Only)
Over 100 km per hour at 12 and 24 Mbps with 128-byte packets at 1 percent PER
Access Point Role:
Outdoor Range
Americas
● 865 feet (260 meters) at 54 Mbps
● 3465 feet (1055 meters) at 11 Mbps
ETSI
● 150 feet (45 meters) at 54 Mbps
● 775 feet (235 meters) at 11 Mbps
TELEC
● 485 feet (145 meters) at 54 Mbps
● 1095 feet (330 meters) at 11 Mbps
Note: Access point with 13-dBi integrated antenna and
Cisco clients
Bridge Role: Point to Point Americas
Range*
● 1.3 miles (2 km) at 54 Mbps
● 9 miles (15 km) at 11 Mbps
Americas
● 350 feet (105 meters) at 54 Mbps
● 1410 feet (430 meters) at 11 Mbps
ETSI
● 195 feet (60 meters) at 54 Mbps
● 630 feet (190 meters) at 11 Mbps
TELEC
● 195 feet (60 meters) at 54 Mbps
● 445 feet (135 meters) at 11 Mbps
Note: Access point with 5.2-dBi patch antenna and Cisco
clients
Americas
● 4.5 miles (7 km) at 54 Mbps
● 14 miles (23 km) at 11 Mbps
EMEA
● 0.2 miles (0.36 km) at 54 Mbps
EMEA
● 5.5 miles (9 km) at 11 Mbps
● 2.3 miles (3.5 km) at 11 Mbps
TELEC
● 4.5 miles (7 km) at 54 Mbps
TELEC
● 0.7 miles (1.1 km) at 54 Mbps
● 3.2 miles (5 km) at 11 Mbps
● 12 miles (20 km) at 11 Mbps
Note: 21-dBi dish antenna at root and non root bridge
Note: 13-dBi integrated antenna at root and non root
bridge
Bridge Role: Point to
Multipoint Range*
Americas
● 1.1 miles (1.8 km) at 54 Mbps
● 8 miles (13 km) at 11 Mbps
EMEA
● 0.25 miles (0.4 km) at 54 Mbps
● 1.1 miles (1.8 km) at 11 Mbps
TELEC
● 0.8 miles (1.3 km) at 54 Mbps
● 3.6 miles (5.8 km) at 11 Mbps
Americas
● 2.0 miles (3.3 km) at 54 Mbps
● 10 miles (16 km) at 11 Mbps
EMEA
● 2.5 miles (4 km) at 11 Mbps
TELEC
● 2.0 miles (3.3 km) at 54 Mbps
● 9.0 miles (14 km) at 11 Mbps
Note: 14-dBi sector at root and 21-dBi dish at non root
Note: 14-dBi sector antenna at root and 13-dBi integrated
antenna at non-root
* Bridge role is only available for autonomous deployments. The distances referenced here are approximations and should be used
for estimation purposes only.
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 11 of 14
Data Sheet
Physical Specifications
Table 7 lists the physical specifications of the Cisco Aironet 1300 Series.
Table 7.
Physical Specifications
AIR-BR1310G-x-K9 AIR BR1310G x K9 R
AIR-PWRINJ-BLR2
AIR-PWRINJ-BLR2T
4.62 in. x 4.76 in. x 1.07 in.
(11.73 cm x 12.09 cm x 2.71 cm)
4.62 in. x 4.76 in. x 1.07 in.
(11.73 cm x 12.09 cm x 2.71 cm)
AIR-LAP1310G-x-K9
AIR-LAP1310G-x-K9R
Dimensions
8 in. x 8.1 in. x 3.12 in. (20.3 cm x 20.57 cm x 7.87 cm)
Weight
2.5 lb (1.25 kg)
2 lb (1 kg)
2 lb (1 kg)
Operational
Temperature
–22º to +131ºF (–30º to +55ºC)
–22º to +131ºF (–30º to +55ºC)
–22º to +131ºF (–30º to +55ºC)
Storage
Temperature
–40º to +185ºF (–40º to +85ºC)
–40º to +185ºF (-40º to +85ºC)
–40º to +185ºF (–40º to +85ºC)
Operational
Altitude
10,000 ft (3048m)
10,000 ft (3048m)
10,000 ft (3048m)
Storage Altitude
16,000 ft (4877 m)
16,000 ft (4877 m)
16,000 ft (4877 m)
Humidity
0 to 100% at 100ºF (38ºC) (condensing)
0 to 90% at 100ºF (38ºC)
(noncondensing)
0 to 90% at 100ºF (38ºC)
(noncondensing)
Vibration
SAEJ1455 section 4.9
SAEJ1455 section 4.9
SAEJ1455 section 4.9
Enclosure
NEMA 4; IP56; UL2083; environmentally sealed
UL2083; metal case
UL2083; metal case
AIR-PWRINJ-BLR2
AIR-PWRINJ-BLR2T
100 to 240V AC, ±10% (power
supply provided by Cisco)
Not required
Power Requirements
Table 8 lists Cisco Aironet 1300 Series power requirements.
Table 8.
Power Requirements
AIR-BR1310G-x-K9
AIR BR1310G x-K9-R
AIR-LAP1310G-x-K9
AIR-LAP1310G-x-K9R
AC Power
Not required—uses DC voltage from power injector
DC Power
—
● +48V DC, ±10%
● Up to 9 W
● +12 to +40V DC, ±10%
● Up to 11 W
Approvals and Compliance
The Cisco Aironet 1300 Series meets the following approvals and compliance standards (Table 9).
Table 9.
Approvals and Compliance
AIR-BR1310G-x-K9
AIR-PWRINJ-BLR2
AIR-BR1310G-x-K9-R
AIR-PWRINJ-BLR2T
AIR-LAP1310G-x-K9
AIR-LAP1310G-x-K9R
Country Compliance
Customers are responsible for verifying approval for use in their country. Please visit
http://www.cisco.com/go/aironet/compliance to verify approval and to identify the regulatory domain that corresponds to a
particular country. Not all regulatory domains have been approved. As they are approved, the part numbers will be available
on the Global Price List.
Wi-Fi Certification
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
—
Page 12 of 14
Data Sheet
AIR-BR1310G-x-K9
AIR-PWRINJ-BLR2
AIR-BR1310G-x-K9-R
AIR-PWRINJ-BLR2T
AIR-LAP1310G-x-K9
AIR-LAP1310G-x-K9R
Safety
Radio Approvals
● UL 60950 third edition
● CSA C22.2 No. 60950-00
● UL 60950 third edition
● CSA C22.2 No. 60950-00
● IEC 60950 Sec Ed, amendments 1-4
● EN 60950; 1992, amendments 1-4
● IEC 60950 Sec Ed, amendments 1-4
● EN 60950; 1992, amendments 1-4
● CSA 94/UL50—NEMA rated
● UL2043
● FIPS 140-2 prevalidation list
● FCC Part 15.247
● RSS—139-1, RSS-210 (Canada)
—
● EN 300.328 (Europe)
● Telec 33B (Japan)
● ARIB-STD-T66 v2.1
● FCC Bulletin OET-65CRSS-102
● Designed to EN60945
EMI and Susceptibility
(Class B)
● FCC Part 15.107 and 15.109 Class B
● ICES-003 Class B (Canada)
● FCC Part 15.107 and 15.109
● Class B
● EN 55022 Class B
● EN 55024
● ICES-003 Class B (Canada)
● EN 55022 Class B
● AS/NZS 3548 Class B
● VCCI Class B
● EN 55024
● AS/NZS 3548 Class B
● EN 301.489-1 and 17 (Europe)
● Designed to CISPR 25, ISO 11452-24,
EN50121, EN60571 and SAEJ1113
● VCCI Class B
● EN 301.489-1 and 17 (Europe)
Additional Specifications
Warranty: One year
Ordering Information
To place an order, visit the Cisco Ordering Home Page. For assistance in determining the correct wireless bridge to
order, as well as appropriate accessories, please read the Cisco Aironet 1300 Series Ordering Guide.
To Download the Software
Cisco Aironet software can be downloaded at the Cisco Software Center.
Service and Support
Cisco Systems offers a wide range of service programs to accelerate customer success. These innovative programs
are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of
customer satisfaction. Cisco services help you to protect your network investment, optimize network operations, and
prepare the network for new applications to extend network intelligence and the power of your business. For more
information about Cisco Services, see Cisco Technical Support Services.
For More Information
For more information about the Cisco Aironet 1300 Series, visit http://www.cisco.com/go/aironet or contact your local
account representative.
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 13 of 14
Data Sheet
Printed in USA
© 2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
C78-340315-07
08/09
Page 14 of 14