Chief PSB2540 flat panel wall mount

INSTALLATION
INSTRUCTIONS
PSB-2540
PLASMA DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(2) Plasma Side Bracket
(4) Mounting Button - Tapped
(4) M8 x 25mm Philips Head Cap Screw
(4) Steel Washer
Figure 1
(2) Plasma Top/Bottom Bracket
(8) 10-24 x .5 Button Head Cap Screw
(4) .75 X .344 X .50 Nylon Spacer
(1) 1/8 Allen Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
CAUTION!
WARNING!
PLASMA DISPLAYS ARE EXTREMELY FRAGILE.
ALL COMPONENTS MUST BE SECURELY FASTENED TO A
STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4
TIMES THE COMBINED WEIGHT OF ALL COMPONENTS
PLUS THE EQUIPMENT BEING MOUNTED. IF IT CANNOT
SUPPORT THIS WEIGHT, THE STRUCTURE MUST BE
REINFORCED.
THE MAXIMUM WEIGHT TO BE INSTALLED ON THE
MOUNT IS 175 POUNDS (79.38 KG).
1. Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button, with
chamfered hole of mounting button (larger surface) facing bracket, to top and bottom brackets (four places)
(see Figure 2 & Figure 3).
Figure 2
CHIEF MANUFACTURING INC.
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PKWY, STE. 700
SAVAGE, MINNESOTA 55378 USA
Figure 3
8804-000205 Rev01
2004 Chief Manufacturing
www.chiefmfg.com
11/06
2. Using four 10-24 button head cap screws, attach top and bottom to side brackets (see Figure 4 &
Figure 5).
3. Place Nylon spacers over mounting holes on back of screen. Attach mounting brackets to display
using M8 screws with steel washers (see Figures 6 & Figure 7).
4. With the aid of another person, lift your display up to the Chief Mount, aligning buttons of mounting
brackets with slots in the Chief Mount.
5. Lower safety latch on the Chief Mount to secure your display, making sure latch is completely
engaged.
Figure 4
Figure 6
Figure 5
Figure 7