Datasheet
Dialogic Diva Analog Media Boards
®
®
Diva Media Boards
The Dialogic Diva Analog Media Boards provide two, four, and
eight ports and serve as an excellent communication platform,
which scales from 2 to 64 channels (phone lines) per single
server.
®
®
This datasheet discusses the following products:
• Dialogic
• Dialogic
• Dialogic
• Dialogic
• Dialogic
• Dialogic
®
®
®
®
®
®
Diva
Diva
Diva
Diva
Diva
Diva
®
®
®
®
®
®
UM-Analog-2 Media Board (PCI and PCIe version)
UM-Analog-4 Media Board (PCI and PCIe version)
UM-Analog-8 Media Board (PCI and PCIe version)
Analog-2 Media Board (PCI and PCIe version)
Analog-4 Media Board (PCI and PCIe version)
Analog-8 Media Board (PCI and PCIe version)
Large
Logocan serve as a base for
The Diva Analog Media Boards offer voice, speech, conferencing, VoIP, modem and fax features,
and
many communication applications. The boards are supported by most standard applications, and are also suitable for new
application development. Diva Analog Media Boards are available in Low Profile, Half Size, or Full Size form factors and are
available in both PCI and PCI Express (PCIe) versions. Diva Analog can be seamlessly combined with other Dialogic Diva Media
®
®
Boards, such as E1/T1, ISDN PRI/BRI, and VoIP.
Because both PCI and PCIe versions share the same feature sets, migration from a PCI server hardware to PCI Express server is
easy. PCI and PCIe versions can also be used in the same server.
The Diva Analog Media Boards support the same set of programming interfaces as other Diva Media Boards: the three Dialogic
®
®
Diva APIs, CAPI, TAPI, COM port, WAN Miniport, TTY, Asterisk, and SIP/RTP. Because of consistent interface support, applications
®
written for one Diva Media Board will normally work without modification with Diva Analog Media Boards.
Medium Logo
To find out more about Dialogic call 800.755.4444 or visit us at: www.dialogic.com
Datasheet
Dialogic Diva Analog Media Boards
®
®
Diva Media Boards
Features
Benefits
Onboard CPU with large RAM and powerful FPGA chip for fast
data streaming between the host CPU, the DSPs, the phone
line and the other active components onboard
Can remove performance bottlenecks by offloading key realtime tasks that would ordinarily place an excessive burden
on the host server, allowing Quality of Service (for example,
voice quality and connection speed) to be more consistent
One powerful DSP dedicated to each communications
channel
Provides real-time processing of complex operations (such as
V.90 data modem, V.34 fax receiver and transmitter, voice
compression, or echo cancellation) without reducing overall
system performance, which lowers implementation costs
Sophisticated hardware design
Operates with low power consumption
Conforms to plug-and-play standards
Easy installation and operation
Implements most supplementary services and many different
analog signaling protocols
Allows application compatibility with major PBXs and can
make a system based Dialogic Diva technology ready for
worldwide use
Pulse and tone dialing
Handles enterprise voice, conferencing, fax, and remote
access applications via any PBX offering analog trunk
interfaces
Voice packetization into Real-time Transport Protocol (RTP),
adaptive jitter buffer, voice compression (G.726, GSM), and
Comfort Noise Generation (CNG)
Permits legacy voice, speech, and conferencing applications
to be used with VoIP clients and IP phones
®
®
Supports the same programming interfaces as other Dialogic
Diva Media Boards: CAPI, TAPI, Dialogic Diva APIs and
others
Reduces porting efforts and time to market by making Diva
Media Boards compatible with standard telephony and
communications applications
Up to eight Diva Media Boards of the same or different types
can operate concurrently in a single server
Easy scalability and flexibility to address an organization’s
communications needs in changing environments, such as
VoIP
®
®
®
®
The Diva UM-Analog-2, UM-Analog-4, and UM-Analog-8 Media Boards support fax transmissions on half (50%) of their available
channels. The feature set of the Diva Media Boards in the UM series has been designed to meet the needs of typical Unified
Messaging applications.
The Diva Analog-2, Analog-4, and Analog-8 boards support V.34 fax transmissions on all available channels. The Diva Analog-2,
Analog-4 and Analog-8 boards are normally referred to as part of the Universal series.
2
Dialogic Diva Analog Media Boards
®
®
Datasheet
Diva Media Boards
Technical Specifications
Quick Reference
Voice resources
Fax resources
Conferencing resources
Maximum boards/system
CSP
Form factor
Resource bus
Connection
Network interface
Signaling
Operating system
Volts
Required accessories
2, 4, or 8
2, 4, or 8 (Universal-Series) and 1, 2 or 4 (UM-Series)
2, 4, or 8
8 (tested by Dialogic); more than 8 are possible — depends on the application
Yes
Low Profile: 2-port PCI/PCIe; Half Size: 4/8-port PCIe; Full Size: 4/8-port PCI
PCI rev 2.2 up to 66 MHz or PCI Express 1.0a x1 lane (3.3/12 V)
2, 4, or 8 RJ-11/14 connectors
Analog
Loopstart
Windows and Linux. Details at http://www.dialogic.com/systemreleases
PCI: 5; PCI Express: 3.3 and 12
None
®
Hardware
• 32-bit RISC CPU, 100 MHz, 131 MIPS
• 2, 4 or 8 DSPs (32.76 MHz and 65 MIPS)
• 16 MB onboard SDRAM Memory
• Telephony interface:
— 2 x RJ-10 (2-port), RJ-10/RJ-11 cables supplied
— 4 x RJ-10 (4-port), RJ-10/RJ-11 cables supplied
— 4 x RJ-45 (8-port), RJ-10/RJ-11 cables and RJ-45/RJ-10 adapters supplied
— POTS trunk interface
— Loopstart signaling
• Physical dimensions:
— 2-port PCI: 167.65 mm x 64.41 mm (PCB)
— 2-port PCIe: 167.65 mm x 68.90 mm (PCB)
— 2-port PCI/PCIe: 180.96 mm x 120.88 mm (with standard bracket)
— 2-port PCI/PCIe: 180.96 mm x 80.06 mm (with low profile bracket)
— 4/8-port PCIe: 167.65 mm x 111.15 mm (PCB)
— 4/8-port PCIe: 180.96 mm x 126.31 mm (with bracket)
— 4/8-port PCI: 312.00 mm x 106.68 mm (PCB)
— 4/8-port PCI: 325.310 mm x 126.37 mm (with bracket)
— 4/8-port PCI: 352.17 mm x 126.37 mm (with bracket and retainer)
• I/O addresses, memory and interrupt allocated automatically
• Plug-and-play interface
• PCI: PCI 2.2, up to 66 MHz, 32 bit (also supports 64 bit dual address cycle DMA), 5 V supply required, 3.3 V, or 5 V universal signaling, supported in
backwards compatible PCI-X slots
• Production quality: ISO 9002
3
Datasheet
Dialogic Diva Analog Media Boards
®
®
Diva Media Boards
Technical Specifications (continued)
Power Consumption and Environmental
• Power consumption:
— 2-port PCI: 0.34A @ +5 V (typical)
— 2-port PCIe: 0.26A @ +3.3 V and 0.16A @ 12 V (typical)
— 4-port PCI: 0.45A @ +5 V (typical)
— 4-port PCIe: 0.26A @ +3.3 V and 0.18A @ 12 V (typical)
— 8-port PCI: 0.5A @ +5 V (typical)
— 8-port PCIe: 0.34A @ +3.3 V and 0.22A @ 12 V (typical)
• Operating temperature: 10°C to 50°C
• Storage temperature: 0°C to 70°C
• Maximum tolerance in voltage fluctuation: According to the respective PCI or PCI Express specification
Dialogic Diva System Release Software, Dialogic Diva SDK Software and Dialogic Diva SIPcontrol Software
• Supported operating systems: Windows and Linux. Details at http://www.dialogic.com/systemreleases
• M-adapter feature (patent pending): Combined Virtual Adapter, Internal Call Transfer, Explicit Call Transfer Emulation
• SNMP support:
— Windows : v2c
— Linux: Net-SNMP v1, v2c and v3
• Application interfaces (provided by Dialogic Diva System Release Software and Dialogic Diva SDK):
— Microsoft : Diva API, Diva API for .NET, Diva Component API (VB.NET), COM Port, WAN Miniport, TAPI, CAPI 2.0, extended CAPI, VoIP (SIP/RTP)
—Linux: Diva API, TTY, CAPI 2.0, extended CAPI, VoIP (SIP/RTP)
• Dialogic Diva SIPcontrol Software: VoIP and FoIP (T.38) Gateway Software. For up to 2 channels per system, the licenses are free of charge. If more
than 2 channels are required, licenses can be ordered from Dialogic. Diva SIPcontrol Software can be downloaded from http://www.dialogic.com.
®
®
®
®
®
®
®
®
Features - Signaling
• Pulse dialing
• Analog caller identification (via FSK and DTMF signaling)
• Tone (DTMF/MF) dialing
• Hold/retrieve (via hookflash)
• Collection of post dial DTMF digits
• Call progress analysis:
— Busy tone detection
— Ring back tone detection
— Special Information Tone (SIT) detection
— Fax/modem detection
— Dial tone detection
4
®
™
Dialogic Diva Analog Media Boards
®
®
Technical Specifications (continued)
Features – Media Processing
• Voice and speech:
— G.711 coding (A-law, µ-law selectable)
— DTMF detection, generation, clamping and filtering
— Generic tone detection and generation
— Pulse tone detection
— Full-duplex voice, barge-in
— Voice Activity Detection (VAD)
— Silence detection
— Human talker detection
— Recording Automatic Gain Control (AGC)
— Pitch control
— Audio tap
— G.168 echo cancellation, up to 128 ms tail length
• Voice over IP (VoIP):
— G.711 voice coder (64 kbps, µ-law, A-law)
— G.726 voice coder (32 kbps)
— G.729 voice coder (VoIP licenses required)
— GSM voice coder (13 kbps)
— Adaptive jitter buffer
— Voice Activity Detection (VAD)
— Comfort Noise Generation (CNG)
— Real-time Transport Protocol (RTP) framing
— G.168 echo cancellation, up to 128 ms tail length
• Switching and conferencing:
— Onboard and cross-board switching and (large) conferencing via line interconnect (call tromboning)
— Automatic Gain Control (AGC)
• Support for Fax Class 1 and 2
• Support for Fax Group 3, T.30:
— V.17, V.29, V.27ter, V.21, V.34 modulation
— Fax polling/ fax on demand
— Up to 33.6 kbps with each channel (send and receive)
— Page formats: ISO A4, B4, A3
— Fax compression MH, MR, MMR
— Error Correction Mode (ECM)
— Standard, fine, super-fine and ultra-fine resolution
— Color fax (JPEG-format)
• Support for FoIP, T.38 (when using Diva SIPcontrol Software):
— Up to 33.6 kbps with each channel (send and receive)
• Data modem (Remote Access, POS and other Low Bit Rate (LBR) applications):
— V.21, V.22, V.22bis, Bell 103, Bell 212A, V.32, V.32bis, V.34, V.42, V.42bis, V.90, MNP4, MNP5
— Modem with extension: V.18, V.21, Bell 103, V.23, EDT, Baudot45/47/50 incl. DTMF, V.42, V.42bis
5
Datasheet
Diva Media Boards
Dialogic Diva Analog Media Boards
®
®
Technical Specifications (continued)
Safety and EMC
Canada: ICES-003 Class B, CSA 60950-1
Europe: EN60950-1, EN55022, EN55024
United States: FCC Part 15 Class B, UL60950-1
Telecommunications
United States: TIA-968
Canada: CS03
Approvals, Compliance, and Warranty
Hazardous substances: RoHS compliance information at http://www.dialogic.com/rohs
Country-specific approvals: Global product approvals at http://www.dialogic.com/declarations
Warranty: Warranty information at http://www.dialogic.com/warranties
Ordering Information
Dialogic Diva Product
Order Code
Analog-2 PCI (with additional LP bracket)
306-302
Analog-2 PCIe (with additional LP bracket)
306-386
UM-Analog-2 PCI (with additional LP bracket)
306-385
UM-Analog-2 PCIe (with additional LP bracket)
306-387
Analog-4 PCI
306-232
Analog-4 PCI China
306-260
Analog-4 PCIe
306-389
UM-Analog-4 PCI
306-384
UM-Analog-4 PCIe
306-388
Analog-8 PCI
306-233
Analog-8 PCI China
306-259
Analog-8 PCIe
306-395
UM-Analog-8 PCI
306-383
UM-Analog-8 PCIe
306-390
Diva G.729 2 CH SW License*
G01-029
Diva G.729 4 CH SW License*
G02-029
Diva G.729 8 CH SW License*
G03-029
®
®
* To be used when VoIP applications like Diva SIPcontrol Software need to support the G.729 coder.
6
Datasheet
Diva Media Boards
Small Logo
www.dialogic.com
Dialogic Corporation
9800 Cavendish Blvd., 5th floor
Montreal, Quebec
CANADA H4M 2V9
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH PRODUCTS OF THE DIALOGIC CORPORATION (“DIALOGIC”). NO LICENSE, EXPRESS OR IMPLIED, BY
ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND
DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC
PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL
PROPERTY RIGHT OF A THIRD PARTY.
Dialogic products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications.
Dialogic, Diva and SIPcontrol are either registered trademarks or trademarks of Dialogic Corporation or its subsidiaries. Dialogic’s trademarks may be used publicly only
with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department at the address listed above. Any authorized use of Dialogic’s trademarks
will be subject to full respect of the trademark guidelines published by Dialogic from time to time, and any use of Dialogic’s trademarks requires proper acknowledgement.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
None of the information provided in this datasheet other than what is listed under the section entitled Technical Specifications forms part of the specifications of the
product and any benefits specified are not guaranteed.
Dialogic may make changes to specifications, product descriptions, and plans at any time, without notice.
This document discusses one or more open source products, systems and/or releases. Dialogic is not responsible for your decision to use open source in connection with
Dialogic products (including without limitation those referred to herein), nor is Dialogic responsible for any present or future effects such usage might have, including
without limitation effects on your products, your business, or your intellectual property rights.
Copyright © 2008 Dialogic Corporation
All rights reserved. 10/08
11236-01