IP Power Switch
IPS-0008
H/W Version: 1
LevelOne IPS-0008 provides users with the
ability to turn power On/Off to any combination
of network equipment, which is locked-up and
thus requires power down to reboot.
Remotely Power On/Off from Web Browser
IPS-0008 gives users the ability to perform this
function from anywhere anytime over the
Internet with the Internet Explorer browser. This
IP power switch is ideal for rebooting servers
and other network equipment in server farms
and for use as part of remote management
systems in office, industry environments.
Intelligent Power Management
Each IPS-0008 provides eight individual outlet
switches. The IPS-0008 is designed to remember
the configuration of each outlet should there
be a power loss thus providing the ability
to power-on, power-off or reboot a remote
4
6
1 23
5
7
8
9 10
Key Features
-Turns power On/Off any AC powered device
(Group or Schedule) via IP network, console
and by manual
-Intelligent turn on/off devices based on event
occurrence or planned schedule
-Support management via web browser, NMS,
Telnet, SNMP and console.
-Administrator and multiple users with
password protection for double-layer security
-Supports two digital outputs to trigger
extended devices
-Monitor Temperature, Humidity, Smoke
Detector via EMD (Environmental Monitoring
Device, Optional)
network device whenever the power cable is
plugged into the IPS-0008 outlet.
Easy Maintenance and Configuration
the IPS-0008 provides event-triggered or
schedule-based control to turn On/Off
connected equipments. The IPS-0008 is
protected against unauthorized access with SSL
and SSH encryption. Administrator and users
who have been properly designated can control
and view the switching state of any specified
combination of sockets.
EMD (Environmental Monitoring Device,
Optional)
the EMD is a connectivity device that allows you
to remotely monitor the temperature, humidity,
smoke detector , motion detector and universal
(any device with normally-open or closed ).
11
12
13
1. Ethernet port
2. Console port
3. Operation mode
4. Reset
5. Remote control button
6. Output power Status
7. Input power Status
8. Status
9. Input power
10. Breaker
11. Power Outlet
12. Dry contact port
13. digital Output
Works Well With
KVM-0811
8 port D-sub PS/2 KVM Switch
EMD
Environmental Monitored
Device (EMD)
www.level1.com I one world_one brand_one level_
Web Smart Switches
Technical Specifications
Hardware
Network Interface
10/100Mbps RJ-45 Ethernet port x1
Input Power Interface
IPS-0008 (110V): 100~125VAC 50/60 Hz, 15A
IPS-0008 (220V): 200~250 VAC 50/60 Hz, 10A
Output Power Interface
Socket
IPS-0008 (110V): 8 Channels NEMA 5-15R
IPS-0008 (220V): 8 Channels IEC C13
Voltage
IPS-0008 (110V): 100~125VAC 50/60 Hz
IPS-0008 (220V): 200~250 VAC 50/60 Hz
Load
IPS-0008 (110V): 15 Amps each Outlet or Total
IPS-0008 (220V): 10 Amps each Outlet or 15 Amps Total
Breaker
IPS-0008 (110V): 15 Amps
IPS-0008 (220V): 10 Amps
Console
RS-232
Dry Contact UPS
Male DB9, RS-232
Status Indicator
Remote Control Indicator
1 Red LED X 8 Channels
Outlet Power Indicator
1 Green LED X 8 Channels
Current Meter
6 Orange LED X 9 Channel
Input Status Indicator
Green 7-Segment X 3
Buttons
8 Remote Control Buttons and 1 Reset Button
Digital Output
2 Channels (switch voltage: 48VDC / 10A max.)
Operating Environment
Temperature 0℃ ~ 40℃
Humidity 10% ~ 80% non-condensed
Dimensions
436(W) mm x 270(D) mm x 44(H) mm
Weight
3.8 kg (8.41bs)
Software
Network Security
Administrator and multiple users with password
protection for double-layer security
Address-specific IP security masks to prevent
unauthorized access.
Secure Socket Layer (SSL V3) 128-bit encryption.
Secure Share (SSH V1) 3DES encryption.
Power Management
Eight power outlets that can be turned on or off
in multiple ways, with easy monitoring of current
consumption
Intelligent turn on/off devices based on event
occurrence or planned schedule.
Comprehensive power management and flexible
configuration through web browser, NMS, Telnet, SNMP,
or HyperTerminal (console).
Status Report
Detailed data-logging for statistical analysis and
diagnostics.
Event notification through SNMP or Email alerts.
Daily history report through Email.
Supported Web Browser
IE 5.0+
Netscape 6.2+
Opera 6+
Mozilla 1.5+
FireFox 1.0+
Other browser which is compatible to above
Network Protocols
TCP/IP, UDP/IP, SNMP V1, SNTP, DNS, DHCP, SMTP, HTTP,
Telnet, TFTP, SSL V3, SSH V1
EMD (Optional)
Sensor & Detector support
Universal (any device with normally-open or closed)
Example: Humidity & Temperature, Vibration, Airflow,
Water-Leak, Smoke, Door, Glass-Broken and etc.
EMD Box Size
57.4(W) x 37.6(D) x 29.2(H) mm
Power
No need for external power supply
Function
1 IPS-0008 supports 1 EMD device.
1 EMD device supports up to 2 sensors.
Product Diagram
Ethernet Cable (RJ-45)
Fiber
Motion
Detector
Door Open
Detector
Smoke
Detector
Mobile
SMS/WAP
PDA
NMS
Browser
Telnet
E-mail
Internet
IPS-0008
Local User
Router
Cable/DSL
Modem
Up to 8 Server/Device
Order Information
IPS-0008: IP Power Switch
Package Contents
IPS-0008 IP Power Switch, Rack-mount Brackets, U-type Handle & Screws, CD Manual
Rubber Feet, Quick Installation Guide, Power Cord, Console Cable
Optional Accessories
EMD
Environmental Monitored Device (EMD)
All mentioned brand names are registered trademarks and property of their owners. Technical specifications are subject to change without notice.
© Copyright 2009 Digital Data Communications GmbH. All Rights Reserved.
V1.0