Bretford Quattro Voltea

BRETFORD BASICS ™
QUATTRO VOLTEA
FLIP TOP COMPUTER TABLES
Quattro Voltea Flip Top Computer Tables have
a rear door for top down management of
power and data cables and are ideal for use
with flat screen monitors.
Made In The USA
FEATURES
• Rear cord bin door flips up for easy access to power and data cables and locks with a key when in the down position.
• Work surface is adjustable in one inch increments from 24" to 32" high, meeting ADA requirements.
• Sturdy 1" thick laminate top with steel skirt and base provide a sturdy work surface for the heaviest of equipment, Quattro tables meet
ANSI-BIFMA safety and quality standards.
• Reinforced leg design is constructed from 12- and 14-gauge steel providing superior strength and stability.
• Cord bin door has cut outs to allow computer cables to easily pass into the cord bin without pinching.
• Cord management bin is 6" deep and has side cut-outs so tables may be easily daisy chained in rows.
• 36", 42" and 48"W tables are designed for one computer, 60" and 72"W tables are designed for two computers, and 84"W table are
designed for three computers.
• Tables come with adjustable floor glides, 3" twin wheel casters are available to replace glides.
• Optional CPU holder mounts to the underside of the work surface and adjusts to hold towers 6-1/2" to 11-1/2"w x 20-3/8"h.
• Optional power solutions include the ECF6 6-outlet electrical unit with on/off switch and 20 foot power cord or the Juice Power System that
daisy chains up to four tables off a single 15 amp outlet. Both attach to pre-drilled holes in the cord management bin.
• Work surface uses a substrate that is comprised of a minimal 40% and average 70% recycled materials and the base is constructed
with “prime” steel which is constructed with 25%-35% post-consumer recycled steel.
• Complies with the GREENGUARD Environmental Institute’s GREENGUARD Children & Schools Indoor Air Quality standards, contributing to
points toward Leadership in Energy and Environmental Design (LEED) Certification.
• Available in five standard finish options or special order in any paint, trim and laminate offered by Bretford.
• Made in the USA.
STANDARD COLOR/FINISH
SUGGESTED SPECIFICATIONS
Base/Tabletops: Grey Mist powder paint/Grey Mist laminate (-GM_)
Quattro Voltea Computer Tables are height adjustable from 24" to
or Black powder paint and trim/Wild Cherry laminate (-CY.)
32" in 1" increments. Available in 24", 30" and 36" depths by 30", 36",
Trim, Toe Caps & Grommet Holes (on Grey Mist tables only): Available
42", 48", 60", 72" and 84" widths depending on the model specified.
in Cardinal (GMC), Topaz (GMT), Polo (GML) and Quartz (GMQ)
Laminate table top and cord bin door are made from 1" thick, 45 lb.
density particle board and 3mm thick vinyl T-molding. The flip up
door includes cut-outs to let power and data cables pass into the
cord bin and a lock with two keys. Note that all Quattro Voltea tables
use the same key to secure the rear flip up door. Table top
Quartz
-GMQ
Cardinal
-GMC
Polo
-GML
Topaz
-GMT
Cherry
-CY
incorporates a 14-gauge steel apron around the table edge for
maximum strength and durability. Telescoping legs are constructed
TABLE ACCESSORIES
from 1-1/4" 12-gauge steel and 1" 14-gauge steel tubing and attach to
QWTCPU
Standard CPU holder for towers 6-1/2" to 11-1/2"W
the top using a unique hex/tie bolt assembly. Cord management bin
QWTMTC
Slim CPU holder for towers 3-1/2" to 5-3/4"W
runs the width of the table, is constructed of 18-gauge steel and is
CT3CP
3" twin plastic stem caster pack
secured to the table apron and leg with (2) 10-32 screws. Table is
available in a Wild Cherry wood grain laminate with Black T-molding
SOFTWIRED POWER OPTION
and Black powder paint base or with a Grey Mist laminate with
ECF6
Quartz, Cardinal, Polo or Topaz T-molding and a Grey Mist powder
6-Outlet Power Strip (1 each table)
paint base. All steel components are constructed with “prime” steel
which features 25% to 35% post-consumer recycled content. Tables
are GREENGUARD INDOOR AIR QUALITY CERTIFIED®.
ECF6 Power Strip
JUICE SOFTWIRE POWER SYSTEM OPTION
DPCF4
Juice 4-Outlet Power Strip (1 each table)
DPP120
Juice Power In-Feed Cable (1 each row)
DPJ32
Juice Power Jumper Cable 32"L (30"w to 30"w tables)
DPJ38
Juice Power Jumper Cable 38"L (36"w to 36"w tables)
DPJ42
Juice Power Jumper Cable 42"L (42"w to 42"w tables)
DPJ54
Juice Power Jumper Cable 54"L (36"w to 60"w and 72"w;
DPJ62
Juice Power Jumper Cable 62"L (60"w to 60"w; 36"w to
DPJ74
Juice Power Jumper Cable 74"L (72"w to 60"w and 72"w;
DPJ86
Juice Power Jumper Cable 86"L (84"w to 72"w and 84"w
and 48"w to 42"w, 48"w and 60"w tables)
84"w; and 48"w to 72"w tables)
and 60"w to 84"w tables)
Reinforced Leg Design
tables)
Juice Power System
LEGROOM WHEN CPU HOLDERS ARE USED
CPU holders mount 5" from the table edge when mounted to the
outside of the table. When two CPUs are mounted subtract 10" from
the table width and then subtract the actual CPU tower width to get
the available leg room.
MADE IN THE USA
All Quattro series tables are made at one of Bretford’s Chicago area
manufacturing facilities using union labor.
Locking Rear Door For Easy Access And Cord Management
DIMENSIONS, WEIGHT & FREIGHT CLASS
CARTON DIMENSIONS
Flip Up Cord Bin Door: 6"d (the door width depends on the overall
24"D RECTANGULAR VOLTEA COMPUTER TABLES:
width of the table)
QFT2430-_:
Cord Management Bin: Bins are 6"d x 6"h and always 6-1/2" shorter
than the overall table length.
QFT2436-_:
Leg Space: Leg space is always 6" less then the overall table width
24"D RECTANGULAR VOLTEA COMPUTER TABLES OVERALL:
QFT2442-_:
QFT2448-_:
QFT2460-_:
QFT2472-_:
QFT3042-_: 42"w x 30"d x 24-32"h, 81 lbs., Freight Class 70 UPS
QFT2484-_:
30"D RECTANGULAR VOLTEA COMPUTER TABLES:
QFT3030-_:
QFT3036-_:
QFT3042-_:
QFT3048-_:
QFT3060-_:
Box 1 “QFT3060TOP-_” - 34"w x 68"d x 4.5"h
Box 2 “QFT60BIN-_” - 7"w x 58"d x 8"h
QFT3072-_:
QFT3672-_: 72"w x 36"d x 24-32"h, 130 lbs., Freight Class 70 LTL
QFT3684-_: 84"w x 36"d x 24-32"h, 147 lbs., Freight Class 70 LTL
Box 1 “QFT3048TOP-_” - 34"w x 56"d x 4.5"h
Box 2 “QFT48BIN-_” - 7"w x 46"d x 8"h
QFT3648-_: 48"w x 36"d x 24-32"h, 101 lbs., Freight Class 70 UPS
QFT3660-_: 60"w x 36"d x 24-32"h, 116 lbs., Freight Class 70 LTL
Box 1 “QFT3042TOP-_” - 34"w x 50"d x 4.5"h
Box 2 “QFT42BIN-_” - 7"w x 40"d x 8"h
QFT3636-_: 36"w x 36"d x 24-32"h, 82 lbs., Freight Class 70 UPS
QFT3642-_: 42"w x 36"d x 24-32"h, 91 lbs., Freight Class 70 UPS
Box 1 “QFT3036TOP-_” - 34"w x 44"d x 4.5"h
Box 2 “QFT36BIN-_” - 7"w x 34"d x 8"h
36"D RECTANGULAR VOLTEA COMPUTER TABLES OVERALL:
QFT3630-_: 30"w x 36"d x 24-32"h, 78 lbs., Freight Class 70 UPS
Box 1 “QFT3030TOP-_” - 34"w x 36"d x 4.5"h
Box 2 “QFT30BIN-_” - 7"w x 28"d x 8"h
QFT3072-_: 72"w x 30"d x 24-32"h, 121 lbs., Freight Class 70 LTL
QFT3084-_: 84"w x 30"d x 24-32"h, 137 lbs., Freight Class 70 LTL
Box 1 “QFT2484TOP-_” - 28"w x 92"d x 4.5"h
Box 2 “QFT84BIN-_” - 7"w x 82"d x 8"h
QFT3048-_: 48"w x 30"d x 24-32"h, 92 lbs., Freight Class 70 UPS
QFT3060-_: 60"w x 30"d x 24-32"h, 105 lbs., Freight Class 70 LTL
Box 1 “QFT2472TOP-_” - 28"w x 80"d x 4.5"h
Box 2 “QFT72BIN-_” - 7"w x 70"d x 8"h
QFT3030-_: 30"w x 30"d x 24-32"h, 64 lbs., Freight Class 70 UPS
QFT3036-_: 36"w x 30"d x 24-32"h, 73 lbs., Freight Class 70 UPS
Box 1 “QFT2460TOP-_” - 28"w x 68"d x 4.5"h
Box 2 “QFT60BIN-_” - 7"w x 58"d x 8"h
QFT2484-_: 84"w x 24"d x 24-32"h, 118 lbs., Freight Class 70 LTL
30"D RECTANGULAR VOLTEA COMPUTER TABLES OVERALL:
Box 1 “QFT2448TOP-_” - 28"w x 56"d x 4.5"h
Box 2 “QFT48BIN-_” - 7"w x 46"d x 8"h
QFT2460-_: 60"w x 24"d x 24-32"h, 92 lbs., Freight Class 70 LTL
QFT2472-_: 72"w x 24"d x 24-32"h, 105 lbs., Freight Class 70 LTL
Box 1 “QFT2442TOP-_” - 28"w x 50"d x 4.5"h
Box 2 “QFT42BIN-_” - 7"w x 40"d x 8"h
QFT2442-_: 42"w x 24"d x 24-32"h, 71 lbs., Freight Class 70 UPS
QFT2448-_: 48"w x 24"d x 24-32"h, 81 lbs., Freight Class 70 UPS
Box 1 “QFT2436TOP-_” - 28"w x 44"d x 4.5"h
Box 2 “QFT36BIN-_” - 7"w x 34"d x 8"h
QFT2430-_: 30"w x 24"d x 24-32"h, 59 lbs., Freight Class 70 UPS
QFT2436-_: 36"w x 24"d x 24-32"h, 65 lbs., Freight Class 70 UPS
Box 1 “QFT2430TOP-_” - 28"w x 36"d x 4.5"h
Box 2 “QFT30BIN-_” - 7"w x 28"d x 8"h
Box 1 “QFT3072TOP-_” - 34"w x 80"d x 4.5"h
Box 2 “QFT72BIN-_” - 7"w x 70"d x 8"h
QFT3084-_:
All tables ship ready to assemble in two carton packs.
Box 1 “QFT3084TOP-_” - 34"w x 92"d x 4.5"h
Box 2 “QFT84BIN-_” - 7"w x 82"d x 8"h
36"D RECTANGULAR VOLTEA COMPUTER TABLES:
QFT3630-_:
Box 1 “QFT3630TOP-_” - 40"w x 36"d x 4.5"h
Box 2 “QFT30BIN-_” - 7"w x 28"d x 8"h
QFT3636-_:
Box 1 “QFT3636TOP-_” - 40"w x 44"d x 4.5"h
Box 2 “QFT36BIN-_” - 7"w x 34"d x 8"h
QFT3642-_:
Box 1 “QFT3642TOP-_” - 40"w x 50"d x 4.5"h
Box 2 “QFT42BIN-_” - 7"w x 40"d x 8"h
QFT3648-_:
Box 1 “QFT3648TOP-_” - 40"w x 56"d x 4.5"h
Box 2 “QFT48BIN-_” - 7"w x 46"d x 8"h
QFT3660-_:
Box 1 “QFT3660TOP-_” - 40"w x 68"d x 4.5"h
Box 2 “QFT60BIN-_” - 7"w x 58"d x 8"h
QFT3672-_:
Box 1 “QFT3672TOP-_” - 40"w x 80"d x 4.5"h
Box 2 “QFT72BIN-_” - 7"w x 70"d x 8"h
QFT3684-_:
Box 1 “QFT3684TOP-_” - 40"w x 92"d x 4.5"h
Box 2 “QFT84BIN-_” - 7"w x 82"d x 8"h
©2002 Bretford / b_quattro_voltea_tables / 08-13-2010
11000 SEYMOUR AVENUE
FRANKLIN PARK, ILLINOIS 60131 USA
TOLL FREE PHONE 800-521-9614
PHONE 847-678-2545
TOLL FREE FAX 800-343-1779
FAX 847-678-0852
WWW.BRETFORD.COM