Bretford Connections XTC Work Center

BRETFORD BASICS ™
CONNECTIONS XTC WORK CENTERS
The Connections XTC Work Centers include a
CPU Harness that attaches to the underside of
the table. Each table is height adjustable to
accommodate most adult users. Tops are
finished in grey laminate with trim available in
four different colors. Bases are constructed of
steel and finished in grey powder paint. Select
from glides or casters to meet your application.
Made In The USA
FEATURES
• CPU tower holder adds extra work space by mounting the CPU tower under the work surface, up and out of the way. Standard CPU holder is
adjustable from 6-1⁄2" to 11-1⁄4"w and slim CPU holder is adjustable from 3-1/2" to 5-3/4"w. Both measure 18-7⁄8"d x 20-3/8”h. 72"W models
feature two CPU tower holders, all other tables come with one.
• Attractive Grey 1" laminate tabletop, 45 lb. density furniture board substrait, trimmed with 3mm T-mold edge band attached along the entire
perimeter of the top. Edge band in your choice of four trim colors, Quartz grey, Cardinal red, Polo green, or Topaz blue. Also available to
special order in any Bretford paint, trim and laminate offered.
• Tops feature metal threaded inserts on the underside to attach the leg assemblies to for a metal to metal connection that adds strength and
greatly reduces the possibility screws will strip or fall out over time.
• Large work surface neatly holds one computer (2 computers on the 72"W units).
• 14-gauge sturdy steel base is constructed with an average 30% post-consumer recycled steel and features a unique “Y” shape design. Cord
management bin with flip down door and grommet holes hide and organize electrical cords.
• Complies with the GREENGUARD Environmental Institute’s GREENGUARD Children & Schools Indoor Air Quality standards, contributing to
points toward Leadership in Energy and Environmental Design (LEED) Certification.
• Tables come with either leveling glides for stationary installations or 4" casters for interactive use.
• All tables have a height adjustable work surface from 24" to 32" (1" increments) for use by children or adults and provide 19" of knee depth
from the front edge to the cord bin. See page two for widths between legs with and without the adjustable CPU holder.
• 36"w tables meet ADA requirements without the CPU holder installed, 42"w tables meet ADA requirements with the CPU holder set up to 7"
wide, and 48"w tables meet ADA requirements with the CPU holder set at any width.
• The base mounts to the top using metal inserts and truss screws coated with lock tight for a strong and secure attachment. The metal insert
prevents the screw from stripping the top if over tightened and the lock tight prevents screws from backing out once installed.
• Options include a 6-outlet electrical unit (ECF6), Juice Power System, and PowerBar cord management with hardwired electrical assembly.
STANDARD COLOR/FINISH
MADE IN THE USA
Base/Tabletops: Grey powder paint/Grey laminate
All Connections series tables are made at one of Bretford’s Chicago
Trim, Toe Caps & Grommet Holes: Available in Cardinal (GMC),
area manufacturing facilities using union labor.
Topaz (GMT), Polo (GML) and Quartz (GMQ)
SUGGESTED SPECIFICATIONS
Tables height adjust from 24-32" in 1" increments. Table width is 36",
42", 48" or 72" depending on the model. Top is constructed with Grey
Mist laminate on 1" furniture board, 45 pound density. Metal threaded
Quartz
-GMQ
Cardinal
-GMC
Polo
-GML
Topaz
-GMT
inserts are installed in the underside of each top so the base attaches
with a metal to metal connection. The modesty panel and cord
PREMIUM COLOR/FINISH OPTIONS
management bin are made from 20-gauge steel. Cord management
Connections tables may be special ordered in any of Bretford’s
bin measures 4"h x 5-3⁄8"d and runs the width of the table. One side
premium finish offerings. For a complete listing of premium finishes
is hinged to the back of the modesty, the other side closes with a
please visit us on the web at www.bretford.com.
thumb screw (included), attaching to the bottom of the work surface.
On 36" and 42" wide tables there is one grommet hole measuring 1-
TABLE ACCESSORIES
1⁄2" x 4" centered on the work surface. The 48" wide table has two
3573-GM
Connections Bridge Pack
grommet holes located 24" apart and the 72" wide tables have two
UCSKD-GM
Keyboard Drawer
grommet holes located 30” apart. Top upright of leg assembly
(Note: UCSKD will not fit on 36"W tables and only on 42"W
constructed from 1-1⁄4" x 2" 14-gauge steel tube. Bottom upright and
and 72"W tables when the CPU is less than 81/2" wide)
bar of base constructed from 1" x 1-3⁄4" 14-gauge steel tube. The “Y”
Keyboard Drawer w/Mouse Extension
shape of leg constructed from 1" square 18-gauge steel tube welded
(Note: UCSKDMP will not fit on 36"W tables and only on 42"W
to 14-gauge steel top support. CPU Harness is constructed from steel
and 72"W tables when the CPU is less than 81/2" wide)
and mounts under the table work surface. All models come with one
Locking CPU Holder (replaces existing holder)
CPU Harness except the 72"w models which come with two. Standard
UCSKDMP2-GM
TGCPU-GM
CPU holder adjusts 6-1⁄2” to 11-1⁄4"w and slim CPU holder adjusts 3-
SOFTWIRED POWER OPTION
ECF6
6-Outlet Power Strip (1 each table)
1/2" to 5-3/4"w. Both are 18-7⁄8"d x 20-3/8"h. GREENGUARD
INDOOR AIR QUALITY CERTIFIED®. All steel parts are constructed
with “prime” steel which has a 25% to 35% post-consumer recycled
JUICE SOFTWIRE POWER SYSTEM OPTION
content and finished in an environmentally friendly Grey Mist powder
DPCF4
Juice 4-Outlet Power Strip (1 each table)
paint. Ship ready to assemble in multiple carton packs.
DPP120
Juice Power In-Feed Cable (1 each row)
DPJ38
Juice Power Jumper Cable 38"L (36"w to 36"w tables)
DPJ42
Juice Power Jumper Cable 42"L (42"w to 42"w tables)
DPJ54
Juice Power Jumper Cable 54"L (48"w to 42"w and 48"w
DPJ62
Juice Power Jumper Cable 62"L (48"w to 72"w tables)
DPJ74
Juice Power Jumper Cable 74"L (72"w to 72"w tables)
and 36"w to 72"w tables)
ECF6 Power Strip
HARDWIRE POWER SYSTEM OPTION
35PBR42-GM
PowerBar Raceway, 42" Table
35PBH42
Power Harness, 42" Table (holds 2 Duplex)
35PBR48-GM
PowerBar Raceway, 48" Table
35PBH48
Power Harness, 48" Table (holds 2 Duplex)
35PBR72-GM
PowerBar Raceway, 72" Table
35PBH72
Power Harness, 72" Table (holds 2 Duplex)
DUPLC_
Duplex Circuit 1, 2, 3 or 4 (2 each table)
JPCPT30
Jumper Cable, Any Size Table
JHDES
Power Entry Cable (1 each row)
35PBRCAP-GM
Pair Raceway End Caps, (1 each row)
35PBFD-GM
Raceway Wire Chase (leads cable to floor)
35PBDCLP-GM
Raceway Data Clip (data jacks not included)
Juice Power System
MEETS ADA REQUIREMENTS
All Connections XTC Work Center tables meet ADA requirements
when a CPU holder is not used. ADA requires 30" between the leg
and CPU holder so the CPU size may impact the table’s ability to
meet the requirements, check your CPU width before purchase. The
48" and 72" tables meet ADA requirements with any size of CPU.
PowerBar Hardwired System
OVERALL DIMENSIONS
CARTON DIMENSIONS, WEIGHT & FREIGHT
UNITS
35XTC21 & 35XTC21MT:
WITH
4"
CASTERS
35XTC17 & 35XTC17MT: 36"w x 30"d x 24-32"h
Leg Room:
31" between legs (no CPU holder)
35XTC17 & 35XTC17MT:
183/4" to 241/2" between legs (1 standard CPU holder)
271/2" to 251/4" between legs (1 slim CPU holder)
37" between legs (no CPU holder)
35XTC15 & 35XTC15MT:
35XTC14 & 35XTC14MT:
43" between legs (no CPU holder)
35XTC23 & 35XTC23MT:
35XTC18 & 35XTC18MT:
67" between legs (no CPU holders)
421/2" to 54" between legs (2 standard CPU holders)
60" to 551/2" between legs (2 slim CPU holders)
UNITS
51"l x 33-1/2"w x 6-1/4"d
98 pounds, Freight class 70 LTL
35XTC25 & 35XTC25MT:
35XTC26 & 35XTC26MT: 72"w x 30"d x 24-32"h
Leg Room:
51"l x 33-1/2"w x 6-1/4"d
95 pounds, Freight class 70 LTL
303/4" to 361/2" between legs (1 standard CPU holders)
391/2" to 371/4" between legs (1 slim CPU holder)
45-1/2"l x 33-1/2"w x 6-1/4"d
96 pounds, Freight class 70 UPS or LTL
35XTC18 & 35XTC18MT: 48"w x 30"d x 24-32"h
Leg Room:
45-1/2"l x 33-1/2"w x 6-1/4"d
94 pounds, Freight class 70 UPS or LTL
243/4" to 301/2" between legs (1 standard CPU holder)
331/2" to 311/4" between legs (1 slim CPU holder)
38-3/4"l x 33-1/2"w x 6-1/4"d
74 pounds, Freight class 70 UPS or LTL
35XTC14 & 35XTC14MT: 42"w x 30"d x 24-32"h
Leg Room:
38-3/4"l x 33-1/2"w x 6-1/4"d
72 pounds, Freight class 70 UPS or LTL
74-1/2"l x 33-1/2"w x 6-1/4"d
128 pounds, Freight class 70 LTL
35XTC26 & 35XTC26MT:
74-1/2"l x 33-1/2"w x 6-1/4"d
130 pounds, Freight class 70 LTL
All ship ready to assemble in one carton.
WITH LEVELING GLIDES
35XTC21 & 35XTC21MT: 36"w x 30"d x 24-32"h
Leg Room:
31" between legs (no CPU holder)
183/4" to 241/2" between legs (1 standard CPU holder)
271/2" to 251/4" between legs (1 slim CPU holder)
35XTC15 & 35XTC15MT: 42"w x 30"d x 24-32"h
Leg Room:
37" between legs (no CPU holder)
243/4" to 301/2" between legs (1 standard CPU holder)
331/2" to 311/4" between legs (1 slim CPU holder)
35XTC23 & 35XTC23MT: 48"w x 30"d x 24-32"h
Leg Room:
43" between legs (no CPU holder)
303/4" to 361/2" between legs (1 standard CPU holder)
39-1/2" to 37-1/4" between legs (1 slim CPU holder)
35XTC25 & 35XTC25MT: 72"w x 30"d x 24-32"h
Leg Room:
67" between legs (no CPU holders)
421/2" to 54" between legs (2 standard CPU holders)
60" to 551/2" between legs (2 slim CPU holders)
STANDARD EQUIPMENT
Table top (1)
Right leg assembly (1)
Left leg assembly (1)
Cord management bin (1)
Modesty panel (1)
CPU Harness (1); 72”w unit (2)
Adjustable floor glides (4) or 4" casters (4), (2) lock
©2002 Bretford / b_xtc_connections / 04-08-2011
11000 SEYMOUR AVENUE
FRANKLIN PARK, ILLINOIS 60131 USA
TOLL FREE PHONE 800-521-9614
PHONE 847-678-2545
TOLL FREE FAX 800-343-1779
FAX 847-678-0852
WWW.BRETFORD.COM