3M CL564 equipment cleansing kit

3M MATERIAL SAFETY DATA SHEET 3M Disinfecting Desk & Office Wipes CL554 and CL564
01/08/2007
Material Safety Data Sheet
Copyright, 2007, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly
utilizing 3M products is allowed provided that: (1) the information is copied in full with no changes unless prior written agreement is
obtained from 3M, and (2) neither the copy nor the original is resold or otherwise distributed with the intention of earning a profit
thereon.
SECTION 1: PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: 3M Disinfecting Desk & Office Wipes CL554 and CL564
MANUFACTURER: 3M
DIVISION: Office Supplies Division
ADDRESS: 3M Center
St. Paul, MN 55144-1000
EMERGENCY PHONE: 1-800-364-3577 or (651) 737-6501 (24 hours)
Issue Date: 01/08/2007
Supercedes Date: 01/08/2007
Document Group: 19-3028-8
Product Use:
Intended Use:
Specific Use:
Cleaning Wipes
Cleaning Wipes
SECTION 2: INGREDIENTS
Ingredient
C.A.S. No.
WATER
QUATERNARY AMMONIUM COMPOUNDS, DI-C8-10-ALKYLDIMETHYL,
CHLORIDES
BENZYL-C12-16-ALKYL DIMETHYL AMMONIUM CHLORIDES
7732-18-5
68424-95-3
% by Wt
> 98
< 0.1
68424-85-1
< 0.1
Composition listed above is describing liqiud portion of non-woven wipe only.
SECTION 3: HAZARDS IDENTIFICATION
3.1 EMERGENCY OVERVIEW
Specific Physical Form: Liquid impregnated non-woven wipe.
Odor, Color, Grade: Clear; citrus fragrance.
General Physical Form: Solid
Immediate health, physical, and environmental hazards:
3.2 POTENTIAL HEALTH EFFECTS
_________________________________________________________________________________________________
Page 1 of 6
3M MATERIAL SAFETY DATA SHEET 3M Disinfecting Desk & Office Wipes CL554 and CL564
01/08/2007
Eye Contact:
Mild Eye Irritation: Signs/symptoms may include redness, pain, and tearing.
Skin Contact:
Contact with the skin during product use is not expected to result in significant irritation.
Inhalation:
No health effects are expected.
Ingestion:
No health effects are expected.
SECTION 4: FIRST AID MEASURES
4.1 FIRST AID PROCEDURES
The following first aid recommendations are based on an assumption that appropriate personal and industrial hygiene practices are
followed.
Eye Contact:
Immediately flush eyes with large amounts of water for at least 15 minutes. Get immediate medical attention.
Skin Contact:
Wash affected area with soap and water. If signs/symptoms develop, get medical attention.
Inhalation:
No need for first aid is anticipated.
If Swallowed:
No need for first aid is anticipated.
SECTION 5: FIRE FIGHTING MEASURES
5.1 FLAMMABLE PROPERTIES
Autoignition temperature
Flash Point
Flammable Limits - LEL
Flammable Limits - UEL
OSHA Flammability Classification:
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
5.2 EXTINGUISHING MEDIA
Non-combustible. Choose material suitable for surrounding fire.
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Wear full protective equipment (Bunker Gear) and a self-contained breathing apparatus
(SCBA). See Hazardous Decomposition section for products of combustion.
Unusual Fire and Explosion Hazards:
No unusual fire or explosion hazards are anticipated.
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
_________________________________________________________________________________________________
Page 2 of 6
3M MATERIAL SAFETY DATA SHEET 3M Disinfecting Desk & Office Wipes CL554 and CL564
01/08/2007
information.
SECTION 6: ACCIDENTAL RELEASE MEASURES
Accidental Release Measures: Observe precautions from other sections. Call 3M- HELPS line (1-800-364-3577) for more
information on handling and managing the spill. Collect as much of the spilled material as possible. Clean up residue with water.
Place in a closed container approved for transportation by appropriate authorities. Dispose of collected material as soon as possible.
In the event of a release of this material, the user should determine if the release qualifies as reportable according to
local, state, and federal regulations.
SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
Keep out of the reach of children.
7.2 STORAGE
Keep container tightly closed.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
Use with appropriate local exhaust ventilation.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
8.2.1 Eye/Face Protection
Avoid eye contact.
8.2.2 Skin Protection
Avoid skin contact.
8.2.3 Respiratory Protection
Do not breathe vapors.
8.2.4 Prevention of Swallowing
Wash hands after handling and before eating.
8.3 EXPOSURE GUIDELINES
None Established
SECTION 9: PHYSICAL AND CHEMICAL PROPERTIES
Specific Physical Form:
Liquid impregnated non-woven wipe.
_________________________________________________________________________________________________
Page 3 of 6
3M MATERIAL SAFETY DATA SHEET 3M Disinfecting Desk & Office Wipes CL554 and CL564
01/08/2007
Odor, Color, Grade:
General Physical Form:
Autoignition temperature
Flash Point
Flammable Limits - LEL
Flammable Limits - UEL
Boiling point
Density
Vapor Density
Clear; citrus fragrance.
Solid
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Approximately 212 ºF [Details: Liquid portion.]
1.0 g/ml [Details: Liquid portion.]
No Data Available
Vapor Pressure
No Data Available
Specific Gravity
pH
Melting point
Approximately 1 [Ref Std: WATER=1] [Details: Liquid portion.]
Approximately 11.3 [Details: Liquid portion.]
Not Applicable
Solubility in Water
Complete [Details: Liquid portion.]
SECTION 10: STABILITY AND REACTIVITY
Stability: Stable.
Materials and Conditions to Avoid: Strong acids
Hazardous Polymerization: Hazardous polymerization will not occur.
Hazardous Decomposition or By-Products
Substance
Condition
Carbon monoxide
Carbon dioxide
Hydrogen Chloride
Oxides of Nitrogen
During Combustion
During Combustion
During Combustion
During Combustion
SECTION 11: TOXICOLOGICAL INFORMATION
Please contact the address listed on the first page of the MSDS for Toxicological Information on this material and/or its
components.
SECTION 12: ECOLOGICAL INFORMATION
ECOTOXICOLOGICAL INFORMATION
Not determined.
CHEMICAL FATE INFORMATION
Not determined.
_________________________________________________________________________________________________
Page 4 of 6
3M MATERIAL SAFETY DATA SHEET 3M Disinfecting Desk & Office Wipes CL554 and CL564
01/08/2007
SECTION 13: DISPOSAL CONSIDERATIONS
Waste Disposal Method: Dispose of along with household waste. As a disposal alternative, dispose of waste product in a facility
permitted to accept chemical waste.
EPA Hazardous Waste Number (RCRA): Not regulated
Since regulations vary, consult applicable regulations or authorities before disposal.
SECTION 14:TRANSPORT INFORMATION
ID Number(s):
70-0712-0618-2, 70-0713-6472-6
Please contact the emergency numbers listed on the first page of the MSDS for Transportation Information for this
material.
SECTION 15: REGULATORY INFORMATION
US FEDERAL REGULATIONS
311/312 Hazard Categories:
Fire Hazard - No Pressure Hazard - No
Reactivity Hazard - No
Immediate Hazard - No
Delayed Hazard - No
STATE REGULATIONS
Contact 3M for more information.
CHEMICAL INVENTORIES
The components of this product are in compliance with the chemical notification requirements of TSCA.
Contact 3M for more information.
INTERNATIONAL REGULATIONS
This MSDS has been prepared to meet the U.S. OSHA Hazard Communication Standard, 29 CFR 1910.1200.
_________________________________________________________________________________________________
Page 5 of 6
3M MATERIAL SAFETY DATA SHEET 3M Disinfecting Desk & Office Wipes CL554 and CL564
01/08/2007
SECTION 16: OTHER INFORMATION
NFPA Hazard Classification
Health: 1 Flammability: 0
Corrosive: No
Reactivity: 0 Special Hazards: None
National Fire Protection Association (NFPA) hazard ratings are designed for use by emergency response personnel to address the hazards that are
presented by short-term, acute exposure to a material under conditions of fire, spill, or similar emergencies. Hazard ratings are primarily based on the
inherent physical and toxic properties of the material but also include the toxic properties of combustion or decomposition products that are known to
be generated in significant quantities.
HMIS Hazard Classification
Health: 0 Flammability: 0
Reactivity: 0
Protection: X - See PPE section.
Hazardous Material Identification System (HMIS(r)) hazard ratings are designed to inform employees of chemical hazards in the workplace. These
ratings are based on the inherent properties of the material under expected conditions of normal use and are not intended for use in emergency
situations. HMIS(r) ratings are to be used with a fully implemented HMIS(r) program. HMIS(r) is a registered mark of the National Paint and
Coatings Association (NPCA).
Revision Changes: Not Applicable
DISCLAIMER: The information in this Material Safety Data Sheet (MSDS) is believed to be correct as of the date issued. 3M
MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR COURSE OF PERFORMANCE OR USAGE OF
TRADE. User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user's method of
use or application. Given the variety of factors that can affect the use and application of a 3M product, some of which are uniquely
within the user's knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a
particular purpose and suitable for user's method of use or application.
3M provides information in electronic form as a service to its customers. Due to the remote possibility that electronic transfer may
have resulted in errors, omissions or alterations in this information, 3M makes no representations as to its completeness or accuracy.
In addition, information obtained from a database may not be as current as the information in the MSDS available directly from 3M.
3M MSDSs are available at www.3M.com
_________________________________________________________________________________________________
Page 6 of 6