With our products we
always look to the future.
TM
Console Guide Rails
Console Drawer Guide Rails – FD-100XX Compatible.
Guide Rails for Fujitsu’s line up of Rack Mounted Console Drawer
units allowing single handed Installation and set-up.
¦ SERVIS Guide Rails – What are the advantages?
Both for initial installation and for ongoing Server
maintenance or Server redeployment, the guide rails
allow easy access and manipulation of the Fujitsu
Console Drawer product.
The guide rails are
available in 3 different sizes to suit virtually all the
requirements of your rack server room.
•
•
•
Standard Inside Mounted – T591 (opposite)
Outside Mounted – T592 (illustrated over)
Side Mounted – T593 (illustrated over)
¦ FEATURES
•
•
•
Extendable length up to 750mm
Includes all screws, washers and fixings.
Compatible with all Console Drawer products FD-100XX
Please note that this information may be subject to change
Created October 2002
Title :-SERVIS Guide Rail Summary Specifications Issue 1.0
With our products we
always look to the future.
KVMs and related products should not be used for the control of extremely hazardous processes, like nuclear reactors, or patient monitoring systems. In
the event of a decision to use the products in these areas, the customer/distributor assumes the responsibility for the decision. Always read the manual
and do not use in areas of high dirt, water or condensation.
The SERVIS logo is a trademark of Fujitsu Component Limited.
Please note that this information may be subject to change
Created October 2002
Title :-SERVIS Guide Rail Summary Specifications Issue 1.0