Digitus DC-59100 video splitter

REAR VIEW
Introduction
RGB SKEW
CAL.
DC-59100 provides perfect skew delay correction. This
delay is as a divaricately result of transmitting RGB signals
over CAT5 cables. The skew level in CAT5 cables is
negligible when distances below 150M. However skew
become significant when using CAT5 over longer
distances.
We suggest, when distances over 150M it is needed.
Features




62ns total delay
2ns delay step increments
Memorize function
Button locked function
Installation
Specifications
(DC-59100)
Function
DC-59100
VGA IN Connector
VGA OUT Connector
Max. Resolution
Power Adapter (Min.)
Housing
Weight
Dimensions (LxWxH) mm
1
1
1280x1024 60Hz
DC 12V 600mA
Aluminum
225 g
130x85x29.5
FRONT VIEW
USER MANUAL
Package Contents
DC-59100 Unit

1 user manual

1 power adapter DC 12V/600mA

1 VGA 1.2M cable (HD-15 Male to Male)
Any thing missed, please contact with your vendor.
1. R channel up button
2. R channel down button
3. G channel up button
4. G channel down button
5. B channel up button
6. B channel down button
7. Lock button
8. Power LED
9. Locked LED
1. VGA OUT
2. VGA IN
3. Power jack
1. Connect VGA IN port HD-15 female connector with
HD-15 male to male cable from device RGB signals.
2. Connect the VGA OUT port HD-15 female connector
with HD-15 male to male cable from monitor.
3. Connect the power adapter.
4. Adjust RGB up and down button.
5. Push lock button to set data as original setting, so that
when the machine reboot it can keeps in this setting.
Operation
Lock/Unlock channel key
 The key controled lock (Locked LED on) or unlock
(Locked LED off) all skew adjusted keys.
 Press this key to toggle switch lock/unlock.
 The skew delay value will been written to EEPROM
when switch from “Unlock” to “Lock”.
 Recommand you keep in lock mode when you
complete skew setting.
A. Adjust/Reset R,G,B skew value
 You have to make sure that calibrator was in unlock
mode. (Locked LED off)
 Press “Up”/”Down” key once for increase/decrease 2ns
delay on each color.
 Press “Up” and ”Down” key on the same time for set
0ns delay on this color.
 Press “Up” or ”Down” key and hold 1 second, repeat
increase/decrease function continually.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or registered
trademarks belonging to their respective companies.