SWITCHING
H3C S3600
Overview
H3C S3600 Series Ethernet Switches are a new generation of premier
multi-layer switches that entirely fulfill the enterprise requirement for
design and implementation of a unified, highly resilient network. One of
the most important and innovative highlights of the S3600 Series
Ethernet Switches is the IRF (Intelligent Resilient Framework)
technology which offers the highly efficient advantage of stackable
technology.
IRF enables network managers to build adaptable
networks with high reliability, scalability and easy management. “Pay as
you go” is the slogan of the S3600 Series Ethernet Switches.
H3C S3600 Series Ethernet Switches include the following models:
S3600-28P-SI,
S3600-28TP-SI,
S3600-28P-PWR-EI,
S3600-28P-EI,
S3600-28P-PWR-SI,
S3600-28F-EI,
S3600-52P-SI,
S3600-52P-EI, S3600-52P-PWR-SI and S3600-52P-PWR-EI.
From management and configuration perspectives, the Fabric appears
Features
as a single device, while from a performance perspective, each switch
in the Distributed Fabric can make its own forwarding decisions, both at
Full wire-speed, multi-layer switching
Layer 2 and Layer 3 for traffic that appears on its ports.
u
The S3600 Series offer L2/L3 wire-speed switching capability for
The IRF technology provides: DDM (Distributed Device Management),
all ports. The system offers 4 GE ports to meet the requirement of
DRR (Distributed Resilient Routing) and DLA (Distributed Link
a single piece of equipment for multiple Gigabit uplinks and for
Aggregation).
access to the Gigabit server, thereby greatly increasing savings
on equipment investment.
u
u
Distributed Device Management (DDM)
Distributed Device Management is the control system for IRF
The hardware supports L3 wire-speed switching, and is able to
technology, responsible for distributing management and control
identify and process the application traffic flows from L2~L4.
information across the IRF Distributed Fabric.
u
All ports have an independent data packet filter, and distinguish
specific application flows for different management and control.
u
Distributed Resilient Routing, provided by Enhanced Image, is an
IRF Technology
advanced
Intelligent Resilient Framework (IRF) is an innovative resilient network
routing
implementation
that
allows
multiple
interconnected switches in an IRF Distributed Fabric to behave as
technology that allows enterprise customers to design and implement
a single active routing entity.
Fast Ethernet core and aggregation that are adaptable, providing
exceptional reliability, scalability and easy management. With IRF
Distributed Resilient Routing (DRR)
u
Distributed Link Aggregation (DLA)
technology, the S3600 Series switches can be interconnected together
to behave as a single logical switching entity called a Distributed Fabric.
Distributed Link Aggregation, provided by Enhanced Image,
allows networks and IRF Distributed Fabrics to be coordinated
2
H3C S3600
SWITCHING
with switches at the edge of the network. DLA guarantees high
based on source MAC address、destination MAC address、VLAN、
levels of resilience since failure in one of the members of the
source IP address、destination IP address, ports and protocols.
Aggregated Link results in automatic redistribution of traffic across
u
The S3600 Series supports flexible queue scheduling algorithms,
the remaining links.
which can be set on the basis of port and queue at the same time.
Excellent PoE (Power over Ethernet) Supply Function
They support Strict Priority (SP), Weighted Round Robin(WRR),
The S3600 Series Switches support PoE function for the LAN switching
Weighted Fair Queuing (WFQ), SP+WRR, and SP+WFQ; 8
infrastructure, which provides power over a copper Ethernet cable to an
priority queues and 2 drop precedence; WRED congestion
endpoint (Powered Device).
avoidance algorithm and port traffic shaping.
u
The S3600 Series switches provide up to 48 simultaneous
u
limits the traffic speed at 64Kbit/s granularity.
full-powered PoE ports at 15.4W for maximum powered-device
support, such as IP telephony and wireless LAN deployments. As
u
PSE (Power Sourcing Equipment) devices, all S3600 series
the priority of the protocol packet with the help of relevant QoS
commands.
With PoE and Voice VLAN technology, these innovative switches
can provide the perfect solution for a converged voice and data
network.
The S3600 Series can configure the Priority for Protocol Packets.
Each protocol packet has its own priority. Customers can modify
Switches are 802.3af compliant PoE switches.
u
The S3600 Series supports Committed Access Rate (CAR) and
Flexible security control policies
u
The S3600 Series supports ARP detection to guard against ARP
High reliability
spoofing launching by hackers or attackers. According to the ARP
u
The S3600 Series supports STP/RSTP/ MSTP, greatly improving
detection function, the switches check the validity of the ARP
redundant back-up for links and fault tolerance capability, so the
packets using the DHCP-Snooping table or the manually
network can run with high levels of stability.
configured IP bonding table. You can also set trusted ports. ARP
packets coming from the trusted ports will not be checked, while
u
The S3600 Series supports the optional RPS (Redundant Power
those
Supply, provided by Enhanced Image), thus improving the fault
The S3600 Series supports VRRP (provided by Enhanced Image),
u
checked
through
the
The S3600 Series supports 802.1x authentication to identify users
version and validity of the 802.1x client running on supplicant
continuity and reliability, network stability is maintained.
systems to prevent those using earlier versions of the 802.1x
client or illegal clients from logging in.
The S3600 Series supports the VRRP backup group port tracking
u
to track the link state of the master’s uplink port and decrease the
The
S3600
Series
supports
Centralized
MAC
address
authentication. It controls accesses to a network through ports
priority of the switch when the port fails. This in turn triggers the
and MAC addresses. This kind of authentication requires no client
new master to be determined in the backup group.
software.
When
operating
in
centralized
MAC
address
The S3600 Series supports ECMP (Equal Cost Multi-path
authentication mode, a switch begins to authenticate the user if it
Protocol, provided by Enhanced Image) routing, which can be
detects a new user MAC address. Additionally, the S3600 Series
used for load balance and routing redundancy.
can perform 802.1x authentication and MAC address-based
authentication simultaneously.
Abundant QoS policies
u
be
checking function enabled on a switch, the switch checks the
that when a fault occurs in guaranteeing communication
u
will
who attempt to access the network. With the 802.1x client version
this way, a redundant route topological structure can be built so
function. As long as this function is enabled, customers can elect
ports
table.
and can build a VRRP back-up group with other L3 switches. In
u
other
DHCP-Snooping table or the manually configured IP binding
tolerance capability and normal network operation duration.
u
from
The S3600 Series supports L2~L4 complex flow classification
u
The S3600 Series supports the Guest VLAN function. This
3
H3C S3600
SWITCHING
u
function enables supplicant systems that are not authenticated to
Abundant System Maintenance and debugging methods
access specific resources and thus perform the corresponding
u
The S3600 Series supports DLDP (Device Link Detection
operations, such as obtaining the 802.1x client, upgrading the
Protocol). DLDP can detect the link status of the optical fiber cable
client, or obtaining other upgrading programs.
or copper twisted pair. If DLDP finds a unidirectional link, it
disables the related port automatically or informs users to disable
The S3600 Series can also prevent unauthorized access to the
it manually depending on the specific configuration, to avoid
network by binding any combination of MAC, IP and PORT.
potential network problems.
Diversified System Configuration and management modes
u
u
The S3600 Series supports Loopback detection on ports. After
The S3600 Series supports Simple Network Management
users enable loopback detection for Ethernet ports, the switch will
Protocol (SNMP) v1/v2/v3 and RMON (Remote Monitoring) v1,
monitor whether the ports have loopback on a regular basis. If the
1/2/3/9 groups of MIBs. These can be managed by a general
switch detects loopback for a particular port, then it will put that
network management platform such as OpenView, and H3C iMC
port under control.
network management system.
u
u
The S3600 Series supports VCT (Virtual Cable Test), convenient
The S3600 Series supports Command Line Interface (CLI), Web
for troubleshooting. Customers can start the virtual cable test
based network management, modem dial-up and TELNET, all of
(VCT) to make the system test the cable connected to the current
which make the equipment management more convenient.
electrical Ethernet port. The test items include: whether a short or
u
The S3600 Series supports HGMP V2 cluster management. After
open circuit exists in the Rx/Tx direction of the cable, and the
enabling HGMP V2, the network administrator can manage
length of the cable in normal status or the length from the port to
several member switches through one command switch and only
the fault point of the cable.
the command switch needs a public network IP address. This can
add up to large public IP address savings and also contributes
significantly to more effective network management.
Specifications
Port Configuration
S3600-28P-SI / S3600-28P-EI /
S3600-28P-PWR-SI/S3600-28PPWR-EI
S3600-28TP-SI
S3600-52P-SI / S3600-52P-EI /
S3600-52P-PWR-SI/
S3600-52P-PWR-EI
S3600-28F-EI
Fixed ports
(1) 24 10/100 BASE-TX
Ethernet ports ;
(2) 1 console port
(1) 24 10/100
BASE-TX Ethernet ports;
(2) 2 10/100/1000 BASE-T
Ethernet ports ;
(3) 1 console port
(1) 48 10/100
BASE-TX
Ethernet ports;
(2) 1 console
port
(1) 24 100BASE-FX SFP ports;
(2) 2 10/100/1000 BASE-T
Ethernet ports ;
(3) 1 console port
Extended Ports
4 1000M SFP
extended ports
2 1000M SFP extended ports
4 1000M SFP extended ports
2 1000M SFP
extended ports
Extended Module
(1) SFP-GE-T
(2) SFP-GE-SX (850nm, 0.55km)
(3) SFP-GE-LX (1310nm, 10km)
(4) SFP-GE-LH40 (1310nm, 40km)
(5) SFP-GE-LH40 (1550nm, 40km)
(6) SFP-GE-LH70 (1550nm, 70km)
(7) SFP-GE-LH70 -CW (1470nm, 70km)
(8) SFP-GE-LH70 -CW (1490nm, 70km)
(9) SFP-GE-LH70 -CW (1510nm, 70km)
(10) SFP-GE-LH70 -CW (1530nm, 70km)
(11) SFP-GE-LH70 -CW (1550nm, 70km)
(12) SFP-GE-LH70 -CW (1570nm, 70km)
(13) SFP-GE-LH70 –CW (1590nm, 70km)
(14) SFP-GE-LH70 -CW (1610nm, 70km
(1) SFP-GE-T
(2) SFP-GE-SX (850nm, 0.55km)
(3) SFP-GE-LX (1310nm, 10km)
(4) SFP-GE-LH40 (1310nm, 40km)
(5) SFP-GE-LH40 (1550nm, 40km)
(6) SFP-GE-LH70 (1550nm, 70km)
(7) SFP-GE-LH70 -CW (1470nm, 70km)
(8) SFP-GE-LH70 -CW (1490nm, 70km)
(9) SFP-GE-LH70 -CW (1510nm, 70km)
(10) SFP-GE-LH70 -CW (1530nm, 70km)
(11) SFP-GE-LH70 -CW (1550nm, 70km)
(12) SFP-GE-LH70 -CW (1570nm, 70km)
(13) SFP-GE-LH70 -CW (1590nm, 70km)
(14) SFP-GE-LH70 -CW (1610nm, 70km)
(15) SFP-FE-SX (1310nm, 2km)
(16) SFP-FE-LX (1310nm, 15km)
(17) SFP-FE-LH40 (1310nm, 40km)
(18) SFP-FE-LH80 (1550nm, 80km)
4
H3C S3600
SWITCHING
Features
S3600-SI
Wire speed L2/L3
switching
Wire speed forwarding on all ports
Switching capacity (28/52 ports): 12.8Gbps/17.6Gbps
Packet forwarding speed (28/52 ports): 9.53Mpps/11.78Mpps
Switching Fabric
32G bps
Switching mode
Store and forward
SDRAM
64M
Buffer
32M
Flash
8M
S3600-EI
16M
RMON on IRF
HGMP on IRF
Peer fabric port testing
IRF Stack
Support Basic IRF stack (DDM, Dynamic link aggregation across
devices), up to 8 units, stacking bandwidth is 4G bps.
PoE
Support Enhanced IRF Stack (DDM、DDR、DLA through LACP and
across devices), up to 8 units, stacking bandwidth is 4G bps.
Peer fabric port testing
Supported by S3600-28P-PWR-SI/EI and S3600-52P-PWR-SI/EI
RPS is supported by all except S3600-28P-SI and S3600-52-SI
Layer 2 switching
MAC Address
l
l
16K MAC addresses
Adding of dynamic/static unicast MAC address, multicast MAC address, and black hole MAC Address
VLAN
l
l
l
l
l
l
4K VLANs (IEEE 802.1Q)
GVRP(GARP VLAN Registration Protocol)
Support Port-based VLAN
Protocol-based VLAN
QinQ
Voice VLAN
Link Aggregation
l
l
l
Support LACP
Aggregation of FE/GE ports: Up to 8 FE or 4 GE ports in each aggregation group
Support up to 12 aggregation groups
Mirroring
l
l
Many-to-one port mirroring (multiple monitored ports to one monitor port N:1)
Traffic mirroring
Flow Control
l
l
IEEE 802.3x full-duplex flow control
Port bandwidth percentage-based Broadcast storm suppression
Link Layer Reliability
l
l
l
l
l
IEEE 802.1D Spanning Tree Protocol (STP)
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol instances (MSTP)
BPDU Tunnel
Support Smart Link
IP Routing
l
l
l
l
Static routing
RIP v1/ v2
OSPF v2 ,ECMP (EI)
VRRP(EI)
Multicast
l
l
IGMP snooping
IGMP v1 and v2,PIM-DM,PIM-SM,MSDP(EI)
Mirroring
l
l
l
Many-to-one port mirroring (that is, multiple mirroring ports, and one monitor port)
RSPAN(EI)
Traffic mirroring
DHCP
l
l
l
l
l
DHCP Snooping
DHCP Relay
DHCP Client
DHCP server(EI)
DHCP option 82
l
l
l
l
l
l
l
Packet redirection
Eight output queues on each port
Support flexible queue scheduling algorithms: SP,WRR,WFQ,SP+WRR,SP+WFQ
Support the 802.1p priority, and the DSCP priority.
Support flow rate limitation.
Support packet limitation
Support re-labeling the 802.1p and DSCP priorities of a packet.
l
L2~L4 Packet filter providing filtering based on source/destination MAC address, source/destination IP address, port, protocol, VLAN, VLAN
range, MAC address range, or invalid frame
Support the time range.
Layer 3 Switching
Convergence
QoS
ACL
l
5
H3C S3600
SWITCHING
Features
S3600-SI
S3600-EI
Security
Security Features
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Support Centralized MAC address authentication
Support Port isolation
Support MAC address black hole
Support MAC Address Learning Limit
Prevent unauthorized access to the network by binding of MAC, IP and PORT
Support SSH V2 (Secure Shell)
Support Port security
Support ARP detection
Support IP source check
Support EAD(endpoint admission defense)
Support IEEE 802.1X user authentication
Guest VLAN
Support HWTACACS authentication
Support HTTPS
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
Support CLI (Command Line Interface) ,console port ,Telnet configuration mode
Support System configuration with SNMP v1/v2/v3
Support HGMP V2
Support RMON (Remote Monitoring) v1/v2/v3/v9 groups of MIBs
Support H3C iMC , Web-based network management
Detailed alarm/debug information output
Support Ping, Tracert, HWping
Support remote maintenance via Telnet Modems and SSH
Support System log
Hierarchical alarm management and alarm filtering
Support DLDP (Device Link Detection Protocol)
Support LLDP/LLDP-MED
Saving debugging information into Flash
Loopback detection on ports
Support VCT (Virtual Cable Test)
Management/ Maintenance
Managementand
Maintenance
Hardware configuration
Outline Dimensions
(HxWxD)mm
• S3600-28P-SI/ S3600-52P-SI/ S3600-28TP-SI/ S3600-28P-EI/ S3600-52P-EI/ S3600-28F-EI: 43.6*440*260 mm
• S3600-28P-PWR-SI/ S3600-52P-PWR-SI/ S3600-28P-PWR-EI/ S3600-52P-PWR-EI: 43.6*440*420 mm
Weight
• S3600-28P-SI/S3600-28TP-S/S3600-28P-EI/ S3600-28F-EI: 3.5kg
• S3600-52P-SI/ S3600-52P-EI: 4kg
• S3600-28P-PWR-SI/ S3600-28P-PWR-EI: 5.8kg
• S3600-52P-PWR-SI/ S3600-52P-PWR-EI: 6.2kg
Input Voltage
All S3600-EI series and S3600-28P-PWR-SI can be AC-powered and DC-powered (except S3600-28P-SI & S3600-52P-SI).
AC: 100v ~ 240V AC50/60Hz
DC: -48 ~ -60V DC
Maximum System Power
Consumption
40W (S3600-28P-SI/S3600-28P-EI/S3600-28TP-SI)
50W (S3600-52P-SI/S3600-52P-EI)
65W (S3600-28F-EI)
450W (S3600-28P-PWR-SI/ S3600-28P-PWR-EI, AC input)
Dissipated power: 150W
PoE: 300W
430W (S3600-28P-PWR-SI/ S3600-28P-PWR-EI, DC input)
Dissipated power: 60W
PoE: 370W
465W (S3600-52P-PWR-SI/ S3600-52P-PWR-EI, AC input)
Dissipated power: 165W
PoE: 300W
820W (S3600-52P-PWR-SI/ S3600-52P-PWR-EI, DC input)
Dissipated power: 80W
PoE: 740W
RPS(all EI series and S3600-28P-PWR-SI, S3600-52P-PWR-SI support)
MTBF
S3600-28P-SI: 57.1 years
S3600-52P-SI: 51.8 years
S3600-28P-EI: 45.9 years
S3600-52P-EI: 42.4 years
S3600-28P-PWR-SI/ S3600-28P-PWR-EI: 29.5 years
S3600-52P-PWR-SI/ S3600-52P-PWR-EI: 26.9 years
S3600-28TP-SI: 84.5 years
S3600-28F-EI: 51.9 years
Noise Parameter
S3600-28P-SI/EI : 40.1dBA
S3600-28TP-SI: 41.1dBA
S3600-52P-SI/EI: 46.5dBA
S3600-28F-EI: 51.3dBA
S3600-28P-PWR-SI/EI: 47.3dBA
S3600-52P-PWR-SI/EI: 46.3dBA
Environment
Operation temperature: 0°C ~ 45°C
Storage temperature: -40°C ~ 70°C
Operating humidity: 5% to 85% non-condensing
Relative humidity: 10% ~ 90%, non-condensing
6
H3C S3600
SWITCHING
Industry standards support
RFC 1157 (SNMP)
u
RFC 1902 (SNMPv2)
Ethernet Protocol
RFC 854 (Telnet)
IEEE 802.1D (STP)
RFC 896 (Congestion control in IP/TCP network)
IEEE 802.1p (CoS)
RFC 925 (Multi-LAN ARP/Proxy ARP)
IEEE 802.1Q (VLANs)
RFC 1122 (Requirements for Internet Hosts)
IEEE 802.1s (MSTP)
RFC 1156 (TCP/IP MIB)
IEEE 802.1w (RSTP)
RFC 1212 (Concise MIB definitions)
IEEE 802.1Q(GVRP)
RFC 1213 (MIB for Network Management of TCP/IP based internets
IEEE 802.1X (Security)
(MIB II))
IEEE 802.3i (10BASE-T)
RFC 1757 (RMON (groups 1 2 3 and 9))
IEEE 802.3u (Fast Ethernet)
RFC 1901 (Community based SNMPv2)
IEEE 802.3x (Flow Control)
RFC 2573 (SNMPv3 Applications)
IEEE 802.3z (Gigabit Ethernet)
RFC 2576 (Coexistence between SNMP V1, V2, V3)
IEEE 802.3ad (Link Aggregation)
RFC 2597 (Assured Forwarding PHB group (partial support))
IEEE 802.3p (four levels of priority)
RFC 2618 (RADIUS Authentication Client MIB)
IEEE 802.3ac (VLAN Tag Frame Extension )
u
RFC 2620 (Radius Accounting MIB)
Administration Protocol
RFC 2819 (Remote Network Monitoring MIB (group 1,2,3,9))
RFC 1812 (IPv4)
RFC 2865 (Remote Authentication Dial In User Service)
RFC 826 (ARP)
RFC 2869bis (Radius Support for Extensible Authentication Protocol
RFC 959 (FTP)
(EAP))
RFC 783 (TFTP)
RFC 2932IP (Multicast Routing MIB)
RFC 768 (UDP)
RFC 3046 (DHCP/BootP Relay)
RFC 791 (IP)
RFC 792 (ICMP)
Safety and Compliance
u
Emissions / Agency Approvals
RFC 793 (TCP)
RFC 2622 (Routing policy)
CISPR 22 Class A
RFC 2474 (Diffserv)
FCC Part 15 Class A
RFC 2131 (DHCP)
EN 55022 Class A
RFC 1058 (RIPv1)
ICES -003 Class A
RFC1723 (RIPv2)
VCCI Class A
RFC 2328 (OSPF v2)
AS/NZS 3548 Class A
RFC 3101 (NSSA)
EN 61000-3-2
RFC 2370 (OSPF Opaque LSA Option)
EN 61000-3-3
RFC 1765 (OSPF Database Overflow)
u
Immunity Product conforms to:
RFC 2338 (VRRP)
EN 55024: 1998
RFC 2362 (PIM-SM)
EN 61000-4-2
RFC 1112 (IGMPv1)
EN 61000-4-3
RFC 2236 (IGMPv2)
EN 61000-4-4
RFC 2865 (RADIUS Authentication)
EN 61000-4-5
RFC 2866 (RADIUS Accounting)
EN 61000-4-6
RFC 2869 (RADIUS Extensions)
EN 61000-4-11
RFC 2267 (Network Ingress Filtering)
7
u
H3C S3600
SWITCHING
Safety Agency Certifications
CSA 22.2 No. 950 3rd ed., 1995
AS/NZS 60950:2000, Australia
UL 60950 3rd ed.
IEC 60950: 1999, corr. Feb. 2000; all national deviations
EN 60950: 2000, ZB and ZC deviations
Networking Application
Broadband Ethernet Access for Residential Community
For the broadband Ethernet access of a residential community, the S3600 series are usually located in the center of the community. In the downlink
direction, users can access the S3600 series via another switch such as the S3100 series; in the uplink direction, the S3600 series can be connected
to the core layer-3 equipment via GE and finally to the WAN backbone network.
Network of Small Enterprise
In a small enterprise network, S3600 series can serve as the backbone switches, which connect to the network of headquarters or other branches.
When the size of the enterprise increases, the network can also be easily expanded by using the IRF technology supported by the S3600 series. As
the size of the enterprise continues to increases, the network can also be easily further expanded.
8
H3C S3600
SWITCHING
Large Enterprise Network
In a large enterprise network, the S3600 series are located at the access layer. The S3600 series can be connected to devices with IRF stack
technology; in the uplink direction, the S3600 series are connected to the layer-3 switch through the GE expansion module. The diagram below
formulates the Gigabit-to-backbone and 100 Mbps-to-desktop network-wide solutions for the Intranet.
Service and Support (3Com APR)
Global Services offers the resources and talents of a major corporation
plus more than two decades of experience in resolving network
challenges and delivering business benefits to enterprises around the
world.
Global support with a personalized, local focus in the local language
helps drive productivity and minimize expenses. Because we understand
both the technology and the business, we’re the partner you need to
remain strong and competitive.
Suggested Service, Support and Training Offerings
GuardianSM Maintenance Service
This service provides comprehensive on-site support and includes advance hardware replacement, expedited telephone
technical support and software upgrades
Note: May not be available in some countries
ExpressSM Maintenance Service
This service provides speedy access to H3C shipment of advance hardware replacements (including a four-hour option),
expedited telephone technical support and software upgrades
An activity-auditing service focused on improving network performance and productivity
Network Health Check
Includes traffic monitoring, utilization analysis, problem identification, and asset deployment recommendations
Extensive report provides blueprint for action
Experts set up and configure equipment and integrate technologies to maximize functionality and minimize business disruption
Network Installation and Implementation Services
Education and Training
For large and complex sites, implementation services include personalized configuration, project management, extended
testing and coaching on network administration
Self-paced and instructor-led technology and product courses, plus certification programs
Product Warranty
The H3C S3600 has a Limited Lifetime hardware warranty that includes the power supply and fan assembly.
9
H3C S3600
SWITCHING
Order Information
Host
BOM Code
0235A10G
0235A10J
0235A10H
0235A10K
0235A10F
0235A10C
0235A10E
0235A10B
0235A10D
0235A10L
Name
Description
LS-3600-28P-SI-OVS
H3C S3600-28P-SI Ethernet Switch with 24 10/100BASE-TX Ports and 4 1000BASE-X Ports (SFP Req.) (AC
110/220V)
LS-3600-52P-SI-OVS
H3C S3600-52P-SI Ethernet Switch with 48 10/100BASE-TX Ports and 4 1000BASE-X Ports (SFP Req.) (AC
110/220V)
LS-3600-28P-EI-OVS
H3C S3600-28P-EI Ethernet Switch with 24 10/100BASE-TX Ports and 4 1000BASE-X Ports (SFP Req.) (AC
110/220V, DC 48V)
LS-3600-52P-EI-OVS
H3C S3600-52P-EI Ethernet Switch with 48 10/100BASE-TX Ports and 4 1000BASE-X Ports (SFP Req.) (AC
110/220V, DC 48V)
LS-3600-28TP-SI-OVS
H3C S3600-28TP-SI Ethernet Switch with 24 10/100BASE-TX ports, 2 1000BASE-X Ports (SFP Req.) and 2
10/100/1000BASE-T Ports (RJ45) (AC 110/220V)
LS-3600-28P-PWR-EI-OVS
H3C S3600-28P-PWR-EI Ethernet Switch with 24 10/100BASE-TX ports and 4 1000BASE-X Ports (SFP Req.) (AC
110/220V, DC -48V)
LS-3600-52P-PWR-EI-OVS
H3C S3600-52P-PWR-EI Ethernet Switch with 48 10/100BASE-TX Ports and 4 1000BASE-X Ports (SFP Req.) (AC
110/220V, DC -48V)
LS-3600-28P-PWR-SI-OVS
H3C S3600-28P-PWR-SI Ethernet Switch with 24 10/100BASE-TX ports and 4 1000BASE-X ports (SFP Req.) (AC
110/220V, DC -48V)
LS-3600-52P-PWR-SI-OVS
H3C S3600-52P-PWR-SI Ethernet Switch with 48 10/100BASE-TX Ports and 4 1000BASE-X Ports (SFP Req.) (AC
110/220V, RPS DC -48V)
LS-3600-28F-EI-OVS
H3C S3600-28F-EI Ethernet Switch with 24 100BASE-FX Ports(SFP Req), 2 1000BASE-X Ports(SFP Req)and 2
10/100/1000BASE-T Ports(RJ45)(AC 110/220V,DC 48V)
Optical GE Modules
BOM Code
Name
Description
0231A562
SFP-GE-SX-MM850-A
1000BASE-SX SFP Transceiver, Multi-Mode (850nm, 550m, LC)
0231A563
SFP-GE-LX-SM1310-A
1000BASE-LX SFP Transceiver, Single Mode (1310nm, 10km, LC)
02312170
SFP-GE-LH40-SM1310
1000BASE-LH40 SFP Transceiver, Single Mode (1310nm, 40km, LC)
02312172
SFP-GE-LH40-SM1550
1000BASE-LH40 SFP Transceiver, Single Mode (1550nm, 40km, LC)
02312173
SFP-GE-LH70-SM1550
1000BASE-LH70 SFP Transceiver, Single Mode (1550nm, 70km, LC)
0231A085
SFP-GE-T
1000BASE-T SFP
0231A453
SFP-GE-LH70-SM1470-CW
1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1470nm, 70km, LC)
0231A454
SFP-GE-LH70-SM1490-CW
1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1490nm, 70km, LC)
0231A455
SFP-GE-LH70-SM1510-CW
1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1510nm, 70km, LC)
0231A456
SFP-GE-LH70-SM1530-CW
1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1530nm, 70km, LC)
0231A449
SFP-GE-LH70-SM1550-CW
1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1550nm, 70km, LC)
0231A450
SFP-GE-LH70-SM1570-CW
1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1570nm, 70km, LC)
0231A451
SFP-GE-LH70-SM1590-CW
1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1590nm, 70km, LC)
0231A452
SFP-GE-LH70-SM1610-CW
1000BASE-LH70 CWDM SFP Transceiver, Single Mode (1610nm, 70km, LC)
0231A54T
SFP-STACK-Kit
SFP Stacking Cable (150cm,including two 1000BASE-T SFP module and one stacking cable)
0231A11U
SFP-GE-LX-SM1310-BIDI
1000BASE-LX BIDI SFP Transceiver, Single Mode (TX1310/RX1490, 10km, LC)
0231A11V
SFP-GE-LX-SM1490-BIDI
1000BASE-LX BIDI SFP Transceiver, Single Mode (TX1490/RX1310, 10km, LC)
Optical FE Modules for S3600-28F-EI
BOM Code
Name
Description
0231A320
SFP-FE-SX-MM1310-A
100BASE-FX SFP Transceiver, Multi-Mode (1310nm, 2km, LC)
0231A564
SFP-FE-LX-SM1310-A
100BASE-LX SFP Transceiver, Single Mode (1310nm, 15km, LC)
0231A089
SFP-FE-LH40-SM1310
100BASE-LH40 SFP Transceiver, Single Mode (1310nm, 40km, LC)
0231A090
SFP-FE-LH80-SM1550
100BASE-LH80 SFP Transceiver, Single Mode (1550nm, 80km, LC)
0231A12T
SFP-FE-LX-SM1310-BIDI
100BASE-LX BIDI SFP Transceiver, Single Mode (TX1310/RX1550, 15km, LC)
10
H3C S3600
SWITCHING
RPS 500-A for S3600-28P-EI, S3600-52P-EI, S3600-28F-EI
BOM Code
Name
Description
0213A01T
AC-RPS500-A3
RPS500-A3 Power with 125W/12V output and 375W/48V output
0404A03V
CAB-Pwr-1m-PS3FP-I
RPS500-A3 Power cable V
RPS 1000-A for S3600-28P-PWR-SI, S3600-52P-PWR-SI,S3600-28P-PWR-EI, S3600-52P-PWR-EI,S3600-28F-EI
BOM Code
Name
Description
0213A01S
AC-RPS1000-A3
Redundant Power Supply, 2 PSU slots, with 1 PSU1500 module and 5 connector cables
0213A01G
AC-Flatpack1500-M
Power Supply Unit with 600W (AC 110V) or 1450W (AC 220V) (optional)
0404A053
CAB-RPS PoE-2m-JD5
Cable A with JD5 type connector (optional)
0404A054
CAB-RPS Non PoE-2m-JD5-A
Cable with JD5-A type connector for Non-PoE switches (optional)
0404A055
CAB-RPS Non PoE-2m-JD5
Cable B with JD5 type connector (optional)
SPARE DC CABLE FOR S3600
BOM Code
0404A04V
Name
CAB-48V Pwr-2m-T2.5^2
Description
Non-PoE Switch DC Power Input Cable-2m (optional)
Visit www.h3c.com for more information about H3C enterprise solutions.
Copyright © 2009 H3C Technologies, Co., Ltd. All rights reserved. H3Cand the H3C logo are in various countries worldwide registered trademarks of H3C
Technologies Co., Ltd., a subsidiary of 3Com Corporation. TippingPoint is in various countries worldwide a registered trademark of TippingPoint
Technologies, Inc., a subsidiary of 3Com Corporation. All other company and product names may be trademarks of their respective companies. While every
effort is made to ensure the information given is accurate, neither H3C or 3Com accepts liability for any errors or mistakes which may arise. All specifications
are subject to change without notice.
09/2009