SNMP-Manageable Optical Ethernet Demarcation Unit For 10/100 Mbps Ethernet
Compact Fiber Optic Network Interface Device
for Industrial-Grade Delivery of Transparent
LAN Services over Fiber, with Media Conversion,
Carrier Grade Remote Management and Line
Provisioning Capabilities.
Features
•Smallest Standalone Fiber Optic Network
Interface Device
•VLAN Compatible - secure and separate
customer traffic
•Supports passive 802.3ah OAM (Operation,
Administration & Management)
•Extra Tagging (Q-in-Q)
•Supports Remote Loopback with MAC
Address Swap
Management
•Carrier-grade SNMP management and line
provisioning
•Link loss and loopback troubleshooting
•Free iView² EMS allows remote bandwidth
management and traffic prioritization
“Industrial Equipment” (IE) features for
operation in difficult environments
•Extended temperature functionality, up to -20° to +75° C
•Multiple power options: AC, DC and
802.3af Power over Ethernet
•DIN clips for DIN-R ail mounting
Quality product
•Made in America with a comprehensive six-year warranty
Typical Application—
Service Provider
Transparent LAN service providers require remote management
capabilities, and must be able to isolate management traffic and
customer data. Typical Customer Premises Equipment (CPE)
do not allow this, since those devices are usually owned by
the customer and inaccessible to the network operator. The
compact IE-MiniFiberLinX-II, functioning as a more advanced
Network Interface Device (NID), is designed for operation
by service providers and campus network administrators. It
provisions point-to-point fiber optic connections and provides
a remote network interface at the customer’s location that
monitors the entire link between two locations.
The IE-MiniFiberLinX-II for fiber optic networks allows service
providers to deliver managed, high-bandwidth “triple play”
voice, video and data services to customer premises.
The IE-MiniFiberLinX-II and the fiber link can be managed as
a single entity, allowing remote configuration and autonomous
alerts to network administrators on fault conditions. As a copperto-fiber media converter, it allows low-cost copper switches to
connect to the fiber line. Offering unparalleled flexibility, the
IE-MiniFiberLinX-II supports multiple fiber types including multimode and single-mode as well as single-strand fiber, doubling
the capacity of installed fiber. Coarse Wavelength Division
Multiplexing (CWDM) functionality is also an option.
The IE-MiniFiberLinX-II comes equipped with one 100 Mbps
fiber port for data and management, one 10/100 twisted pair
port for customer data, as well as an RS-232 port for local
configuration on the unit during installation. The IE-MiniFiberLinX-II supports multiple powering options. Use
the included AC power adapter or use a 4-terminal DC power
block, which has an extended voltage range of 5 to 50VDC. The
IE-MiniFiberLinX-II also complies with the IEEE 802.3af Power
over Ethernet standard, acting as a Powered Device (PD) to draw
power when connected to 802.3af-compliant Power Sourcing
Equipment (PSE).
NID Application
www.imcnetworks.com
800-624-1070
www.imcnetworks.com
800-624-1070 Combining copper-to-fiber conversion, extended
temperature performance, plug-and-play
operation, miniature size and multiple power
options, the IE-MiniFiberLinX-II is one of the
most versatile fiber optic NID devices available
on the market today.
RoHS Compliant
IE-MiniFiberLinX-II
Full-Featured IE-MiniFiberLinX-II
From a central location, network operators are able to receive real-time device and traffic statistics on the remote device, allocate bandwidth, turn
services on or off, initiate loopback testing, modify VLAN settings and adjust QoS policies assigned to different traffic types.
•VLAN Support— VLAN tagging capability keeps customer
data and SNMP traffic separated
•Troubleshooting Features— FiberAlert, LinkLoss and 802.3ah
Passive OAM (Operations, Administration and Maintenance)
assist in diagnosing potential problems on fiber optic networks
•Loopback Testing— Functionality loops back all frames
arriving on the fiber port (except for the device’s management
traffic). Supports MAC Address swap on Loopbacks
•Bandwidth Control— Fine granularity allows operators to
offer custom levels of service and easily change bandwidth
allocation, remotely, in seconds via SNMP
•Supports the Unified Management Agent (UMA)—
The FiberLinX family has always supported Host/Remote
environments, i.e. managing the Remote from the Host
location. With UMA, operators can centrally manage all
devices installed in an iMediaChassis using only a single IP
address for the chassis. Refer to the UMA data sheet for more
information
Using the VLAN Functionality on the IE-MiniFiberLinX-II
Service providers routinely use IEEE 802.1Q Virtual Local Area Network (VLAN) tagging to secure, separate and differentiate customer traffic. The
IE-MiniFiberLinX-II enables service providers support of multiple VLAN-based applications.
•IEEE 802.1Q VLAN compatible
•Valid VLAN IDs are 1 to 4,094
•Port-based VLAN tagging and Q-in-Q (extra tagging)
•Transparency Mode passes all data and respects the VLAN tag or
lack thereof, i.e. allows a mixture of VLAN Tagged and Untagged
traffic
•Configure to support VLAN IDs, filtering/passing up to 32 VLAN IDs
for data, plus an additional VLAN ID for SNMP management
•IEEE 802.1p provides a two-tier queue for differential prioritization
of inbound and outbound traffic, which is especially beneficial for
traffic requiring high priority, such as VoIP
Using Coarse Wavelength Division Multiplexing (CWDM) with the IE-MiniFiberLinX-II
Optionally, the IE-MiniFiberLinX-II provide for Coarse Wave Division Multiplexing, adding scalability to data delivery
•Scalability allows transport of data on up to eight wavelengths
•Increase bandwidth without the addition of more fiber strands
SNMP Management Made Easy
The IE-MiniFiberLinX-II features an SNMP management
agent for monitoring the status and activity on copper
and fiber ports at the remote end. Initial setup and
modifications can be performed in the field via iView²
SNMP application, Telnet/TFTP, or a local serial (CRAFT)
connection.
•Remote, software upgrades via Telnet/TFTP or
management software ( iView²)
•Monitor unit and fiber with real-time monitoring and
statistics
•Change bandwidth “on-the-fly” up to 100 Mbps
•Create a secure management domain to isolate
management domain broadcasts from TX Data ports
on both units
•User-definable unit/port descriptions and information
www.imcnetworks.com
800-624-1070 Application Examples
(cont.)
Typical Application— Single
IE-MiniFiberLinX-II Solution
NID Application
Network operators can deploy a single
IE-MiniFiberLinX-II in stand-alone applications. At
the Central Office (CO), a fiber switch connects
via a fiber cable to the IE-MiniFiberLinX-II at the
customer premises. The IE-MiniFiberLinX-II can be
managed from the CO over SNMP or Telnet.
Typical Application— Powering
Options
The IE-MiniFiberLinX-II is very versatile and offers
a range of AC and DC powering options. It
also supports 802.3af powering functionality,
allowing it to act as a Powered Device (PD). The IE-MiniFiberLinX-II can be powered from a
PSE-enabled wireless Access Point, which in turn
can be powered by a remote source such as
the solar panels on a street light. The data is
transmitted over fiber to an iMediaChassis/20 with
iMcV modules in the Central Office to form an
end-to-end managed system.
Technical Specifications
Networking
General
•Preserves complete end-to-end fiber
connection integrity
•Bi-directional bandwidth control
•Read/write IEEE 802.1Q VLAN-tags
•Supports Extra Tagging (Q-in-Q)
•Supports passive 802.3ah OAM
(Operation, Administration &
Management)
•QoS: IEEE 802.1p-based packet
prioritization (2 queues [high/low] with 8 levels of priority)
•Layer 2 packet switching, store and
forward operation
•Forwarding rate: 14,881 pps for 10 Mbps;
148,810 pps for 100 Mbps
•AutoCross for MDI/MDIX
•Features Auto Negotiation and Selective
Advertising
•Supports Half and Full-Duplex operation
•MTU: Supports over-sized packets up to
1916 bytes per packet
Security
•Password Control
•Multiple Access Levels: User Assigned
Physical Specifications
Management
•SNMP V1 and V2c compatible
•Includes GUI-based iView² software for
remote management and upgrades
•Monitors far-end (remote) status without a
physical presence or separate connection
•IEEE 802.3x Flow Control
•Includes DHCP and TFTP clients
•Supports Telnet
•Includes loopback test modes
(MAC swap)
•Includes LinkLoss and FiberAlert
•Supports the Unified Management Agent
(UMA)
•Includes status LEDs
•RS-232 (Craft) interface for local
management
•Serial cable for direct connection to a
PC’s Serial Port
Fiber Types Supported
•50/125µm or 62.5/125µm multi-mode fiber
•9/125µm single-mode fiber
•Single-strand fiber or CWDM
Connectors: RJ-45, and ST or SC
Shipping Weight: 0.30 lbs (0.11 kg)
Dimensions: 0.83”H x 1.80”W x 3.35”D
(2.11 x 4.57 x 8.51 cm)
Environmental
•Humidity: 5% - 95% (non-condensing)
•Operating Temperature: -4° to +167° F
(-20° to +75° C) excluding AC wall adapter; with AC wall adapter: +32° to +122° F (0° to +50°C)
•Storage Temperature: -49° to +185° F (-45° to +85° C)
Ethernet Types Supported
•IEEE 802.3i 10Base-T twisted pair
•IEEE 802.3u 100Base-TX twisted pair
•IEEE 802.3u 100Base-FX or SX fiber
Accounts & Access Levels
www.imcnetworks.com
RoHS Compliant
800-624-1070 Power
•DC Input Voltage:
750mA @ 5V to 75mA @ 50 VDC
•IEEE 802.3af Power over Ethernet
Technical Specifications (con’t.)
IMC MIB:
·Traps (Cold Start, Warm Start,
Authentication Failure, Link Up, Link
Down, Remote Unit Lost, Remote
Unit Back Online, Far End TX Link
On and Far End TX Link Off)*
· Link Status of Ports
· Port Type
· Fiber Type
· SNMP Port (Host/Remote)
· SNMP Agent IP Address
(Host/Remote/Single)
· Link Partner
· User-Definable Name of Product
· User-Definable ID/Name of Ports
· Enable/Disable Ports
· Enable/Disable FiberAlert
· Enable/Disable loopback modes
· Set Duplex Mode for Twisted
Pair Ports
· Set Auto Negotiation/Speed for Twisted Pair Ports
MIB-II (RFC 1213):
· Packets Transmitted
· Packets Received
· Octets (bytes) Transmitted
· Octets (bytes) Received
· Plus All Standard MIB II Objects
RMON Statistics provided for:
· Drop Events
· Total Bytes
· Total Packets
· Broadcast Packets
· Multicast Packets
· CRC Align Errors
· Undersize Packets
· Oversize Packets
· Fragments
· Jabbers
· Collisions
· Distribution of Frame Size
*Send traps to a virtually unlimited number of trap-host server destinations.
Ordering Information
Part Number
w/ AC ADAPTER
Part Number
w/O AC ADAPTER
Description
Distance
IE-MiniFiberLinX-II TP-TX/FX (Industrial Ethernet)
856-19717
856-19740
IE-MiniFiberLinX-II, TP-TX/FX-MM850-ST
856-19718
856-19741
IE-MiniFiberLinX-II, TP-TX/FX-MM850-SC
856-19722
856-19732
IE-MiniFiberLinX-II, TP-TX/FX-MM1300-ST
856-19723
856-19733
IE-MiniFiberLinX-II, TP-TX/FX-MM1300-SC
IE-MiniFiberLinX-II, TP-TX/FX-SM1310/PLUS-ST
856-19724
856-19734
856-19725
856-19735
IE-MiniFiberLinX-II, TP-TX/FX-SM1310/PLUS-SC
856-19726
856-19736
IE-MiniFiberLinX-II, TP-TX/FX-SM1310/LONG-ST
856-19727
856-19737
IE-MiniFiberLinX-II, TP-TX/FX-SM1310/LONG-SC
856-19730
IE-MiniFiberLinX-II, TP-TX/FX-SM1550/LONG-SC
856-19728
IE-MiniFiberLinX-II, TP-TX/FX-SM1550/XLONG-SC
IE-MiniFiberLinX-II TP-TX/SSFX Single-Strand Fiber* (Industrial Ethernet)
856-19750
856-19760
IE-MiniFiberLinX-II, TP-TX/SSFX-MM1300-SC (1550rcv)
856-19751
856-19761
IE-MiniFiberLinX-II, TP-TX/SSFX-MM1550-SC (1310rcv)
856-19752
856-19762
IE-MiniFiberLinX-II, TP-TX/SSFX-SM1310-SC (1550rcv)
856-19753
856-19763
IE-MiniFiberLinX-II, TP-TX/SSFX-SM1550-SC (1310rcv)
856-19754
856-19764
IE-MiniFiberLinX-II, TP-TX/SSFX-SM1310/PLUS-SC (1550rcv)
856-19755
856-19765
IE-MiniFiberLinX-II, TP-TX/SSFX-SM1550/PLUS-SC (1310rcv)
856-19756
856-19766
IE-MiniFiberLinX-II, TP-TX/SSFX-SM1310/LONG-SC (1550rcv)
856-19757
856-19767
IE-MiniFiberLinX-II, TP-TX/SSFX-SM1550/LONG-SC (1310rcv)
2 km
2 km
5 km
5 km
40 km
40 km
40 km
40 km
80 km
100 km
2 km
2 km
20 km
20 km
40 km
40 km
60 km
60 km
* These products have single-strand fiber technology. Deploy in pairs, or connect to another compatible IMC Networks single-strand fiber product.
For more information go to: www.imcnetworks.com/products/SSFX.cfm
IMC Networks
Headquarters
19772 Pauling
Foothill Ranch, CA 92610
TEL: 949-465-3000
FAX: 949-465-3020
sales@imcnetworks.com
IMC Networks
Europe
Herseltsesteenweg 268
B-3200 Aarschot, Belgium
TEL: +32-16-550880
FAX: +32-16-550888
eurosales@imcnetworks.com
IMC Networks
Eastern US/Latin America
28050 U.S. Hwy. 19 North, Suite 306
Clearwater, FL 33761
TEL: 727-797-0300
FAX: 727-797-0331
latinsales@imcnetworks.com
IMC Networks
Fiber Consulting Services
For information call:
TEL: 949-465-3000
1-800-624-1070 (US/CAN)
+32-16-550880 (Europe)
fcs@imcnetworks.com
Copyright © 2010 IMC Networks. All rights
reserved. The information in this document is
subject to change without notice. IMC Networks
assumes no responsibility for any errors that may
appear in this document. Specific product names
may be trademarks or registered trademarks and
are the property of their respective companies.
DS-IE-Mini-FiberLinx-II-1005