Hewlett Packard Enterprise X131 10-GbE X2 CX4 Transceiver

QuickSpecs
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
Overview
Models
HP X131 10G X2 SC SR Transceiver
HP X131 10G X2 SC LR Transceiver
HP X131 10G X2 SC ER Transceiver
HP X131 10G X2 CX4 Transceiver
HP X131 10G X2 SC LRM Transceiver
J8436A
J8437A
J8438A
J8440C
J9144A
DA - 12987
EMEA — Version 7 — April 14, 2011
Page 1
QuickSpecs
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
Technical Specifications
HP X131 10G X2 SC SR
Transceiver (J8436A)
Ports
Connectivity
HP X131 10G X2 SC SR
Transceiver: An X2 format Physical characteristics
10-gigabit transceiver with
SC connectors using SR
technology.
Environment
Electrical characteristics
Cabling
1 SC 10-GbE port (IEEE 802.3ae Type 10GBASE-SR); Duplex: full only
SC
Connector type
850 nm
Wavelength
3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x
Dimensions
1.09 cm)
0.35 lb. (0.16 kg)
Weight
X2
Transceiver form factor
32ºF to 158ºF (0ºC to 70ºC)
Operating temperature
0% to 95%, noncondensing
Operating relative
humidity
Nonoperating/Storage
-40ºF to 185ºF (-40ºC to 85ºC)
temperature
0% to 95%, noncondensing
Nonoperating/Storage
relative humidity
up to 10,000 ft. (3 km)
Altitude
1.7 W
Power consumption
typical
2.4 W
Power consumption
maximum
Cable type::
62.5/125 µm or 50/125 µm (core/cladding) graded-index, low metal
content, multimode fiber optic, complying with ITU-T G.651 and ISO/IEC
793-2 Type A1b or A1a, respectively;
Maximum distance:
2-26m with 62.5 µm multimode cable @ 160 MHz*km
2-33m with 62.5 µm multimode cable @ 200 MHz*km
2-66m with 50 µm multimode cable @ 400 MHz*km
2-82m with 50 µm multimode cable @ 500 MHz*km
2-300m with 50 µm multimode cable @ 2000 MHz*km
Cable length
2-300m
Multi Mode
Fiber type
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended.
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Notes
Services
DA - 12987
EMEA — Version 7 — April 14, 2011
Page 2
QuickSpecs
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
Technical Specifications
HP X131 10G X2 SC LR
Transceiver (J8437A)
Ports
Connectivity
An X2 form-factor
transceiver that supports Physical characteristics
the 10-Gigabit LR
standard, providing 10Gigabit connectivity up to
10 km on single-mode
Environment
fiber.
Electrical characteristics
Cabling
1 SC 10-GbE port (IEEE 802.3ae Type 10GBASE-LR); Duplex: full only
SC
Connector type
1310 nm
Wavelength
3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x
Dimensions
1.09 cm)
0.35 lb. (0.16 kg)
Weight
X2
Transceiver form factor
32ºF to 104ºF (0ºC to 40ºC)
Operating temperature
15% to 95%, noncondensing
Operating relative
humidity
-40ºF to 185ºF (-40ºC to 85ºC)
Nonoperating/Storage
temperature
up to 10,000 ft. (3 km)
Altitude
2W
Power consumption
typical
3W
Power consumption
maximum
Cable type::
Low metal content, single-mode fiber-optic, complying with ITU-T G.652
and ISO/IEC 793-2 Type B1;
Maximum distance:
10 km
Cable length
2m to 10km with 9/125 ìm single-mode cable
Single Mode
Fiber type
Conditioning patch cord cables are not supported
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Notes
Services
DA - 12987
EMEA — Version 7 — April 14, 2011
Page 3
QuickSpecs
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
Technical Specifications
HP X131 10G X2 SC ER
Transceiver (J8438A)
Ports
Connectivity
HP X131 10G X2 SC ER
Transceiver: An X2 format Physical characteristics
10-gigabit transceiver with
SC connectors using ER
technology.
Environment
Electrical characteristics
Cabling
Notes
Services
HP X131 10G X2 CX4
Transceiver (J8440C)
HP X131 10G X2 CX4
Transceiver: An X2 format
10-gigabit CX4
transceiver.
Ports
Connectivity
Physical characteristics
Environment
Electrical characteristics
DA - 12987
1 SC 10-GbE port (IEEE 802.3ae Type 10GBASE-ER); Duplex: full only
SC
Connector type
1550 nm
Wavelength
3.48(d) x 1.42(w) x 0.43(h) in. (8.84 x 3.61 x
Dimensions
1.09 cm)
0.35 lb. (0.16 kg)
Weight
X2
Transceiver form factor
32ºF to 104ºF (0ºC to 40ºC)
Operating temperature
15% to 95%, noncondensing
Operating relative
humidity
3W
Power consumption
typical
4.5 W
Power consumption
maximum
Cable type::
Low metal content, single-mode fiber-optic, complying with ITU-T G.652
and ISO/IEC 793-2 Type B1;
2m to 30km (max 40km on engineered links)
Cable length
Single Mode
Fiber type
Conditioning patch cord cables are not supported
For fiber patch cords, use Ultra Physical Contact (UPC) surface
termination/polish. Angled Physical Contact (APC) is not recommended.
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
1 CX4 10-GbE port (IEEE 802.3ak Type 10GBASE-CX4); Duplex: full only
CX4
Connector type
3.54(d) x 1.42(w) x 0.53(h) in. (8.99 x 3.61 x
Dimensions
1.35 cm)
0.18 lb. (0.08 kg)
Weight
X2
Transceiver form factor
32ºF to 131ºF (0ºC to 55ºC)
Operating temperature
15% to 95%, noncondensing
Operating relative
humidity
-40ºF to 185ºF (-40ºC to 85ºC)
Nonoperating/Storage
temperature
up to 10,000 ft. (3 km)
Altitude
1.0 W
Power consumption
typical
3.3 W
Power consumption
maximum
EMEA — Version 7 — April 14, 2011
Page 4
QuickSpecs
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
Technical Specifications
Cabling
Maximum distance:
• 15m with CX4 cables
• 300m with optical media converter and multimode fiber cable
Connector: CX4; Duplex: full
Use CX4 10-GbE cable (0.5-15 m) or HP X130 CX4 Optical Media
Converter (J8439A).
For suggested vendors of CX4 cables, please see the "Cabling" answers on
the "HP 10-GbE Transceivers" FAQs Web page.
Optical Media Converter (OMC) J8439A is not supported on the C version
as the power supply for the OMC was removed in this design.
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Notes
Services
HP X131 10G X2 SC LRM Ports
Transceiver (J9144A)
Physical characteristics
An X2 form-factor
transceiver that supports
the 10-Gigabit LRM
standard, providing 10Environment
Gigabit connectivity up to
220 m on legacy
multimode fiber.
Electrical characteristics
Cabling
1 SC 10-GbE port (IEEE 802.3aq Type 10GBASE-LRM); Duplex: full only
3.54(d) x 1.59(w) x 0.7(h) in. (9.0 x 4.05 x 1.78
Dimensions
cm)
0.35 lb. (0.16 kg)
Weight
X2
Transceiver form factor
32ºF to 158ºF (0ºC to 70ºC)
Operating temperature
0% to 95%, noncondensing
Operating relative
humidity
-40ºF to 185ºF (-40ºC to 85ºC)
Nonoperating/Storage
temperature
up to 10,000 ft. (3 km)
Altitude
3.2 W
Power consumption
typical
4.2 W
Power consumption
maximum
Cable type:
62.5/125 µm or 50/125 µm (core/cladding) diameter, graded-index, low
metal content, multimode fiber optic, complying with ITU-T G.651 and
ISO/IEC 793-2 Type A1b or A1a, respectively (a mode conditioning patch
cord may be needed in some multimode fiber installations);
Maximum distance:
• 0.5-220m with 62.5 µm multimode cable @ 160/500 MHz*km
• 0.5-220m with 62.5 µm multimode cable @ 200/500 MHz*km
• 0.5-100m with 50 µm multimode cable @ 400/400 MHz*km
• 0.5-220m with 50 µm multimode cable @ 500/500 MHz*km
• 0.5-220m with 50 µm multimode cable @ 1500/500 MHz*km
.5m to 220m
Cable length
Multi Mode
Fiber type
Wavelength: 1310nm
For OM3 cable (50 ìm multimode @ 1500/500 MHz*km), a modeconditioning patch cord is not required. Other multimode cables may
Notes
DA - 12987
EMEA — Version 7 — April 14, 2011
Page 5
QuickSpecs
HP X131 10G X2 Transceivers (SR, LRM, LR, ER and CX4)
Technical Specifications
require mode-conditioning patch cords to achieve the maximum distances
listed above.
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the J9144A 10-GbE X2-SC
LRM Optic" on the "HP 10-GbE Transceivers" Manuals Web page.
Power Consumption: 4W Max
Refer to the HP website at www.hp.com/networking/services for details on
the service-level descriptions and product numbers. For details about
services and response times in your area, please contact your local HP sales
office.
Services
To learn more, visit www.hp.com/networking
© Copyright 2011 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without
notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products
and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.
DA - 12987
EMEA — Version 7 — April 14, 2011
Page 6