Data Sheet
Cisco 5500 Series Wireless Controllers
®
Maximum Performance and Scalability
● Support for up to 500 access points and 7000
clients.
● 802.11n optimized for up to nine times the
performance of 802.11a/g networks.
● Enhanced uptime with the ability to
simultaneously configure and manage 500
access points per controller
Improved Mobility and Services
● Larger mobility domain for more simultaneous
client associations.
● Faster RRM updates for uninterrupted network
access when roaming.
● Intelligent RF control plane for self-configuration,
self-healing, and self-optimization.
● Efficient roaming improves application
performance such as toll quality, voice, and
consistent streaming video and data backup.
Licensing Flexibility and Investment Protection
● Additional access point capacity licenses may be
added over time.
OfficeExtend Solution
● Secure, simple, cost-effective mobile teleworker
solution.
● Up to 500 remote access points per controller.
● Supports Unified Communications wireless
phones for reduced cell phone charges.
Comprehensive Wired/Wireless Security
● Full CAPWAP access point to controller
encryption.
● Supports rogue access point detection and
denial-of-service attacks.
● Management frame protection detects malicious
users and alerts network administrators.
The Cisco 5500 Series Wireless Controller is a highly scalable and
flexible platform that enables system wide services for mission-critical
wireless in medium to large-sized enterprises and campus
environments. Designed for 802.11n performance and maximum
scalability, the 5500 Series offers enhanced uptime with RF visibility
and protection, the ability to simultaneously manage up to 500 access
points; superior performance for reliable streaming video and toll quality
voice; and improved fault recovery for a consistent mobility experience
in the most demanding environments.
Features
Optimized for high performance wireless networking, the 5500 Series
offers improved mobility and prepares the business for the next wave of
mobile devices and applications. The 5500 Series supports a higher
density of clients and delivers more efficient roaming, with at least nine
times the throughput of existing 802.11a/g networks.
The 5500 Series automates wireless configuration and management
functions and allows network managers to have the visibility and control
needed to cost-effectively manage, secure and optimize the
performance of their wireless networks. With integrated CleanAir
technology the 5500 Series protects 802.11n performance by providing
cross-network access to real-time and historic RF interference
information for quick, troubleshooting and resolution. As a component
of the Cisco Unified Wireless Network, this controller provides realtime
®
communication between Cisco Aironet access points, the Cisco
Enterprise Wireless Mesh
● Dynamic wireless mesh networks support indoor
and outdoor connectivity for areas that are
difficult to wire.
Wireless Control System (WCS), and the Cisco Mobility Services
Environmentally Responsible
● Support for adaptive power management to turn
off access point radios during off-peak hours to
reduce power consumption.
● OfficeExtend solution reduces costs and supports
green best practices by reducing commuting time
and saving on gas, vehicle mileage, and
insurance costs.
and quality of service (QoS).
Engine to deliver centralized security policies, wireless intrusion
prevention system (IPS) capabilities, award-winning RF management,
Software Licensing Flexibility
Base access point licensing offers flexibility to add up to 500 additional
access points as business needs grow. The licensing structure
supports a variety of business mobility needs as part of the basic
feature set, including the OfficeExtend solution for secure, mobile teleworking and Enterprise Wireless Mesh, which
allows access points to dynamically establish wireless connections in locations where it may be difficult or
impossible to physically connect to the wired network.
Table 1 lists the features of the Cisco 5500 Series Wireless LAN Controllers.
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 7
Data Sheet
Table 1.
Cisco 5500 Series Wireless LAN Controller Features
Feature
Benefits
Scalability
● Supports 12, 25, 50,100, 250 or 500 access points for business-critical wireless services at locations of all sizes.
High Performance
● Wire speed, non-blocking performance for 802.11n networks.
RF Management
● Provides both real-time and historical information about RF interference impacting network performance across
controllers, via system wide CleanAir integration.
OfficeExtend
● Supports corporate wireless service for mobile and remote workers with secure wired tunnels to the Cisco
Aironet® 1130 or 1140 Series Access Points.
● Extends the corporate network to remote locations with minimal set up and maintenance requirements
(zerotouch deployment).
● Improves productivity and collaboration at remote site locations.
● Separate SSID tunnels allow both corporate and personal Internet access.
● Reduced CO2 emissions from decrease in commuting.
● Higher employee job satisfaction from ability to work at home.
● Improves business resiliency by providing continuous, secure connectivity in the event of disasters, pandemics,
or inclement weather.
Comprehensive End-to-End
Security
● Offers Control and Provisioning of Wireless Access Points (CAPWAP) compliant DTLS encryption to ensure
full-line-rate encryption between access points and controllers across remote WAN/LAN links.
Enterprise Wireless Mesh
● Allows access points to dynamically establish wireless connections without the need for a physical connection to
the wired network.
● Available on select Cisco Aironet access points, Enterprise Wireless Mesh is ideal for warehouses,
manufacturing floors, shopping centers and any other location where extending a wired connection may prove
difficult or aesthetically unappealing.
High Performance Video
● Integrates VideoStream technology as part of the Cisco Medianet freamework to optimize the delivery of video
applications across the WLAN.
End-to-end Voice
● Supports Unified Communications for improved collaboration through messaging, presence, and conferencing.
● Supports all Cisco Unified Communications Wireless IP Phones for cost-effective, real-time voice services.
High Availability
● An optional redundant power supply helps to ensure maximum availability.
Environmentally Responsible
● Organizations may choose to turn off access point radios to reduce power consumption during off peak hours.
Table 2 lists the product specifications for Cisco 5500 Series Wireless Controllers.
Table 2.
Product Specifications for Cisco 5500 Series Wireless Controllers
Item
Specifications
Wireless
IEEE 802.11a, 802.11b, 802.11g, 802.11d, WMM/802.11e, 802.11h, 802.11n
Wired/Switching/ Routing
IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX specification, 1000BASE-T. 1000BASE-SX, 1000-BASE-LH,
IEEE 802.1Q Vtagging, and IEEE 802.1AX Link Aggregation.
Data Request For Comments
(RFC)
● RFC 768 UDP
● RFC 791 IP
● RFC 2460 IPv6 (pass through Bridging mode only)
● RFC 792 ICMP
● RFC 793 TCP
● RFC 826 ARP
● RFC 1122 Requirements for Internet Hosts
● RFC 1519 CIDR
● RFC 1542 BOOTP
● RFC 2131 DHCP
● RFC 5415 CAPWAP Protocol Specification
● RFC 5416 CAPWAP Binding for 802.11
Security Standards
● WPA
● IEEE 802.11i (WPA2, RSN)
● RFC 1321 MD5 Message-Digest Algorithm
● RFC 1851 The ESP Triple DES Transform
● RFC 2104 HMAC: Keyed Hashing for Message Authentication
● RFC 2246 TLS Protocol Version 1.0
● RFC 2401 Security Architecture for the Internet Protocol
● RFC 2403 HMAC-MD5-96 within ESP and AH
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 7
Data Sheet
Item
Specifications
● RFC 2404 HMAC-SHA-1-96 within ESP and AH
● RFC 2405 ESP DES-CBC Cipher Algorithm with Explicit IV
● RFC 2406 IPsec
● RFC 2407 Interpretation for ISAKMP
● RFC 2408 ISAKMP
● RFC 2409 IKE
● RFC 2451 ESP CBC-Mode Cipher Algorithms
● RFC 3280 Internet X.509 PKI Certificate and CRL Profile
● RFC 3602 The AES-CBC Cipher Algorithm and Its Use with IPsec
● RFC 3686 Using AES Counter Mode with IPsec ESP
● RFC 4347 Datagram Transport Layer Security
● RFC 4346 TLS Protocol Version 1.1
Encryption
● WEP and TKIP-MIC: RC4 40, 104 and 128 bits (both static and shared keys)
● AES: CBC, CCM, CCMP
● DES: DES-CBC, 3DES
● SSL and TLS: RC4 128-bit and RSA 1024- and 2048-bit
● DTLS: AES-CBC
● IPSec: DES-CBC, 3DES, AES-CBC
Authentication, Authorization,
and Accounting (AAA)
● IEEE 802.1X
● RFC 2548 Microsoft Vendor-Specific RADIUS Attributes
● RFC 2716 PPP EAP-TLS
● RFC 2865 RADIUS Authentication
● RFC 2866 RADIUS Accounting
● RFC 2867 RADIUS Tunnel Accounting
● RFC 2869 RADIUS Extensions
● RFC 3576 Dynamic Authorization Extensions to RADIUS
● RFC 3579 RADIUS Support for EAP
● RFC 3580 IEEE 802.1X RADIUS Guidelines
● RFC 3748 Extensible Authentication Protocol
● Web-based authentication
● TACACS support for management users
Management
● SNMP v1, v2c, v3
● RFC 854 Telnet
● RFC 1155 Management Information for TCP/IP-Based Internets
● RFC 1156 MIB
● RFC 1157 SNMP
● RFC 1213 SNMP MIB II
● RFC 1350 TFTP
● RFC 1643 Ethernet MIB
● RFC 2030 SNTP
● RFC 2616 HTTP
● RFC 2665 Ethernet-Like Interface types MIB
● RFC 2674 Definitions of Managed Objects for Bridges with Traffic Classes, Multicast Filtering, and Virtual
Extensions
● RFC 2819 RMON MIB
● RFC 2863 Interfaces Group MIB
● RFC 3164 Syslog
● RFC 3414 User-Based Security Model (USM) for SNMPv3
● RFC 3418 MIB for SNMP
● RFC 3636 Definitions of Managed Objects for IEEE 802.3 MAUs
● Cisco private MIBs
Management Interfaces
● Web-based: HTTP/HTTPS
● Command-line interface: Telnet, Secure Shell (SSH) Protocol, serial port
● Cisco Wireless Control System (WCS)
Interfaces and Indicators
● Uplink: 8 (5508) 1000BaseT, 1000Base-SX and 1000Base-LH transceiver slots
● Small Form-Factor Pluggable (SFP) options (only Cisco SFPs supported): GLC-T, GLC-SX-MM, GLC-LH-SM
● LED indicators: link
● Service Port: 10/100/1000 Mbps Ethernet (RJ45).
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 7
Data Sheet
Item
Specifications
● Service Port : 10/100/1000 Mbps Ethernet (RJ45) For High Availability for future use
● LED indicators: link,
● Utility Port: 10/100/1000 Mbps Ethernet (RJ45)
● LED indicators: link
● Expansion Slots: 1 (5508)
● Console Port: RS232 (DB-9 male/RJ-45 connector included), mini-USB
● Other Indicators: Sys, ACT, Power Supply 1, Power Supply 2
● Dimensions (WxDxH): 17.30 x 21.20 x 1.75 in. (440 x 539 x 44.5 mm)
● Weight: 20 lbs (9.1 kg) with 2 power supplies
● Temperature: Operating temperature: 32 to 104°F (0 to 40°C); Storage temperature: -13 to 158°F (-25 to 70°C)
● Humidity: Operating humidity: 10 95%, noncondensing; Storage humidity: up to 95%
Physical and Environmental
● Input power: 100 to 240 VAC; 50/60 Hz; 1.05 A at 110 VAC, 115 W Maximum; 0.523 A at 220 VAC, 115 W
Maximum; Test Conditions: Redundant Power Supplies, 40C, Full Traffic.
● Heat Dissipation: 392 BTU/hour at 110/220 VAC Maximum
Regulatory Compliance
CE Mark
Safety:
● UL 60950-1:2003
● EN 60950:2000
● EMI and susceptibility (Class A):
● U.S.: FCC Part 15.107 and 15.109
● Canada: ICES-003
● Japan: VCCI
● Europe: EN 55022, EN 55024
Table 3 and Table 4 list the ordering and accessories information for Cisco 5500 Series Wireless Controllers.
Table 3.
Ordering Information for Cisco 5500 Series Wireless Controllers
Part Number
Product Name
SMARTnet 8x5xNBD
AIR-CT5508-12-K9
5500 Series Wireless Controller for up to 12 Cisco access points
CON-SNT-CT0812
AIR-CT5508-25-K9
5500 Series Wireless Controller for up to 25 Cisco access points
CON-SNT-CT0825
AIR-CT5508-50-K9
5500 Series Wireless Controller for up to 50 Cisco access points
CON-SNT-CT0850
AIR-CT5508-100-K9
5500 Series Wireless Controller for up to 100 Cisco access points
CON-SNT-CT08100
AIR-CT5508-250-K9
5500 Series Wireless Controller for up to 250 Cisco access points
CON-SNT-CT08250
AIR-CT5508-500-K9
5500 Series Wireless Controller for up to 500 Cisco access points
CON-SNT-CT08500
Table 4.
Accessories for Cisco 5500 Series Wireless Controllers
Part Number
Product Name
AIR-PWR-5500-AC=
5500 Series Wireless Controller Redundant AC Power Supply
AIR-FAN-5500=
5500 Series Wireless Controller Fan Tray
AIR-CT5500-RK-MNT
5500 Series Wireless Controller Spare mounting kit
Additive Capacity Upgrade Licenses
The following additive capacity upgrade licenses are available for the Cisco 5500 Series:
Table 5.
e-License
Ordering Information for Cisco 5500 Series Wireless Controllers Additive Capacity Licenses (e-delivery PAK’s)
Part Number
Product Description
SMARTnet 8x5xNBD
L-LIC-CT5508-UPG
Primary upgrade SKU: Pick any number or combination of the following options
under this SKU to upgrade one or many controllers under one product
authorization key
CON-SNT-LCTUPG
L-LIC-CT5508-25A
25 AP Adder License for the 5508 Controller (eDelivery)
CON-SNT-LCT25A
L-LIC-CT5508-50A
50 AP Adder License for the 5508 Controller (eDelivery)
CON-SNT-LCT50A
L-LIC-CT5508-100A
100 AP Adder License for the 5508 Controller (eDelivery)
CON-SNT-LCT100A
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 7
Data Sheet
Table 6.
Paper
License
Part Number
Product Description
SMARTnet 8x5xNBD
L-LIC-CT5508-250A
250 AP Adder License for the 5508 Controller (eDelivery)
CON-SNT-LCT250A
Ordering Information for Cisco 5500 Series Wireless Controllers Additive Capacity Licenses (Paper PAK’s)
Part Number
Product Description
SMARTnet 8x5xNBD
LIC-CT5508-UPG
Primary upgrade SKU: Pick any number or combination of the following options
under this SKU, to upgrade one or many controllers under one product
authorization key.
CON-SNT-LCTUPG
LIC-CT5508-25A
25 AP Adder License for the 5508 Controller
CON-SNT-LCT25A
LIC-CT5508-50A
50 AP Adder License for the 5508 Controller
CON-SNT-LCT50A
LIC-CT5508-100A
100 AP Adder License for the 5508 Controller
CON-SNT-LCT100A
LIC-CT5508-250A
250 AP Adder License for the 5508 Controller
CON-SNT-LCT250A
The additive capacity licenses allow for the increase in access point capacity supported by the controller upto a
maximum of 500 Access points. As an example, if a controller was initially ordered with the 250 access point
support, that capacity could be later increased to upto 500 access points by purchasing a 250 access point additive
capacity license (1x-LIC-CT5508-250A).
A certificate with a PAK is required to add additional access point capacity on the Cisco 5500 Series Wireless
Controller.
The certificate may be expedited via email. If a paper certificate is required for customs, it should be ordered to ship
via U.S. mail. Each additive capacity license and PAK must be registered prior to installation.
Ordering and installing the Cisco 5500 Series Wireless Controller additive capacity licenses is a three-step process:
1.
Select the correct SKU for email or paper delivery.
2.
Register the PAK certificate. (See Registering PAK Certificate).
3.
Install the license on the Cisco 5508 Series Wireless Controller. (See Installing License).
Please review the Cisco Wireless LAN Controller Configuration Guide, Release 6.0, for detailed ordering,
registration and installation information for the 5500 Series additive capacity licenses.
Electronic delivery of the same PAK’s is available by ordering the e-License SKUs as listed in Table 4. If a paper
certificate is required, please use the SKUs listed in Table 5.
PAK Certificate Registration
Customers are required to register a PAK certificate for all upgrade licenses for the Cisco 5500 Series Wireless
Controllers. Customer email address and host name are required to register the PAK certificate at
http://www.cisco.com/go/license.
Installing License on Cisco WCS Server
Follow these steps to install a license file. If you need additional help, contact Cisco Technical Assistance Center
(TAC) at 800 553-2447 or tac@cisco.com.
1.
2.
Install Cisco WCS software if not already completed.
Save the license file (.lic) to a temporary directory on your hard drive. (You will receive an email from Cisco with
an attached license file).
3.
4.
Open a supported version of the Internet Explorer browser.
In the location or address field, enter the following URL, replacing IP address with the IP address or host name
of the Cisco WCS server: https: // <IP address>.
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 7
Data Sheet
5.
Log in to the Cisco WCS server as system administrator. (Be aware that usernames and passwords are
casesensitive.).
6.
From the Help menu select Licensing.
7.
On the Licensing page, from the command menu select Add License....
8.
On the Add License page, click Browse to navigate to the location where you saved the .lic file.
9.
Click Download. The Cisco WCS server imports the license.
Service and Support
Cisco Wireless LAN Services
Cisco and our specialized partners offer a broad portfolio of end-to-end services to help you improve your
organization’s productivity and collaboration by assisting with the readiness, deployment and optimization of your
wireless network and mobility services. Our services help you successfully deploy the 5500 Series Wireless
Controller and integrate mobility solutions effectively to lower the total cost of ownership and secure your wireless
network. To learn more about Cisco Wireless LAN Service offers, please visit
http://www.cisco.com/go/wirelesslanservices.
Cisco WLAN Advanced Services Consulting is available for the planning and deployment stages to help ensure the
successful integration of the Cisco 5500 Series Wireless Controller in your network. Cisco WLAN Advanced
Services Consulting can be ordered with the SKU listed in Table 6.
Please contact your Cisco Sales representative with the information required for a pricing quote:
●
Number of sites
●
Desired coverage area (square feet or square miles)
●
Estimated number of access points per site
●
Advanced Mobility Services and required applications
Table 7.
Ordering Information for planning and deployment consulting services for the Cisco 5500 Series Wireless Controllers
Part Number
Service Name
AS-WLAN-CNSLT
Cisco WLAN Advanced Services Consulting
Summary
The Cisco 5500 Series Wireless Controller is designed for 802.11n performance and offers maximum scalability for
enterprise and service provider wireless deployments. It simplifies deployment and operation of wireless networks,
helping to ensure smooth performance, enhance security, and maximize network availability. The Cisco 5500 Series
Wireless Controller manages all of the Cisco access points within campus environments and branch locations,
eliminating complexity and providing network administrators with visibility and control of their wireless LANs.
For More Information
For more information about Cisco wireless controllers, contact your local account representative or visit
http://www.cisco.com/en/US/products/ps6366/index.html.
For more information about the Cisco Unified Wireless Network framework, visit
http://www.cisco.com/go/unifiedwireless.
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 7
Data Sheet
Printed in USA
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
C78-521631-05
09/10
Page 7 of 7