Fujitsu PRIMERGY TX150 S7

Datasheet Fujitsu PRIMERGY TX150 S7 Mono-Socket Intel® Xeon® processor server
Datasheet
Fujitsu PRIMERGY TX150 S7 Mono-Socket Intel®
Xeon® processor server
The one-processor tower server - maximized!
PRIMERGY TX industry standard tower servers:
efficient, rock solid, record-breaking performance.
PRIMERGY TX servers benefit from over 20 years
pioneering work in the field of Green IT. That is how
TX servers reach industry – leading performance per
watt ratios, lowering the environmental impact and
running costs. TX servers can easily be managed
via the free of charge PRIMERGY ServerView Suite,
saving IT admin costs. That’s efficient performance.
Our made-to-measure service packages take care
of your system every step of the way. Rest assured,
PRIMERGY TX servers are put through 5000 boot
cycles - that’s rock solid performance. PRIMERGY
TX servers are flexible systems capable of using up
to two processors and up to 20 hard disks. Tower
to rack mounting kits are available for most TX
systems to help you move to a consolidated rack
infrastructure. TX servers have a tradition of setting
record-breaking performance levels. So, whether
you use them as tower or rack servers, for file,
print or application purposes, you will benefit from
record-breaking performance. PRIMERGY TX: a tower
of strength.
PRIMERGY TX150 S7
The PRIMERGY TX150 S7: the right system for SMEs
or non-mission-critical decentralized infrastructures
where the main focus is on expandability and
availability. The expandability and availability come
from the 6 expansion slots (5 of which PCIe Gen 2)
and up to 8x 2.5” hot-plug hard disks. Increase the
system’s availability and energy efficiency through
the use of optional redundant power supplies
boasting up to 89% energy efficiency. The TX150 S7
also offers up to the latest generation Intel® Xeon®
processor 3400 series single processor platform,
delivering excellent energy-efficient performance at
an attractive price. The PRIMERGY TX150 S7: the
one processor tower server – maximized!
Page 1 / 8
http://ts.fujitsu.com/Primergy
Datasheet Fujitsu PRIMERGY TX150 S7 Mono-Socket Intel® Xeon® processor server
Features and Benefits
Main Features
Benefits
„„By combining the latest Intel mono-processor platform and SAS 2.0
hard disks with Fujitsu’s engineering, you can get great performance
with low energy consumption.
„„Hot plug hard disks: choose between max. 4x 3.5 or max. 8x 2.5”.
Power supply units: choose between standard or redundant.
„„Up to 32GB of RAM and 6 expansion slots (5 of which second
generation PCIe slots)
„„The PRIMERGY TX150 S7 can be integrated into a rack infrastructure
with the tower to rack conversion kit
„„The green touch points, the system ID card and the customer selfservice module make servicing the TX150 S7 easier
®
Page 2 / 8
„„High performance and energy efficiency
„„High availability options to suit your business
„„High expandability - the TX150 S7 grows with your business.
„„High versatility - increases your investment’s lifetime
„„High serviceability - saves your time
http://ts.fujitsu.com/Primergy
Datasheet Fujitsu PRIMERGY TX150 S7 Mono-Socket Intel® Xeon® processor server
Technical details
Mainboard
Mainboard type
Chipset
Processor quantity and type
D 2759
Intel® 3420
1 x Intel® Core™ i3 processor / Intel® Pentium® processor / Intel® Xeon® processor L3400 series / Intel® Xeon® processor
X3400 series
Processor
Intel® Core™ i3-540 processor
(2C/4T, 3.06 GHz, TLC: 4 MB, Turbo: No, 1333 MHz, 73 W)
Intel® Core™ i3-550 processor
(2C/4T, 3.20 GHz, TLC: 4 MB, Turbo: No, 1333 MHz, 73 W)
Intel® Pentium® processor G6950
(2C, 2.80 GHz, TLC: 3 MB, Turbo: No, 1066 MHz, 73 W)
Intel® Xeon® processor L3406
(2C/4T, 2.26 GHz, TLC: 4 MB, Turbo: 2/2, 1066 MHz, 30 W)
Intel® Xeon® processor L3426
(4C/8T, 1.86 GHz, TLC: 8 MB, Turbo: 2/2/9/10, 1333 MHz, 45 W)
Intel® Xeon® processor X3430
(4C/4T, 2.40 GHz, TLC: 8 MB, Turbo: 1/1/2/3, 1333 MHz, 95 W)
Intel® Xeon® processor X3450
(4C/8T, 2.66 GHz, TLC: 8 MB, Turbo: 1/1/4/4, 1333 MHz, 95 W)
Intel® Xeon® processor X3470
(4C/8T, 2.93 GHz, TLC: 8 MB, Turbo: 2/2/4/5, 1333 MHz, 95 W)
Intel® Xeon® processor X3480
(4C/8T, 3.06 GHz, TLC: 8 MB, Turbo: 2/2/4/5, 1333 MHz, 95 W)
Memory slots
Memory slot type
Memory capacity (min. - max.)
Memory protection
Memory notes
6
DIMM (DDR3)
1 GB - 32 GB
ECC
For the following modules a maximum of 4 DIMMs can be configured: 4GB (quad-ranked) with 1066MHz, 8GB RDIMM, all
UDIMM modules.
Maximum configurable memory capacity: UDIMMs (max. 16GB) with all processors; RDIMMs (max. 32 GB) with Xeon
CPUs only.
The following modules can be configured 6x: 4GB (dual-rank) and 2GB (dual-rank).
Memory modules
1 GB (1 module(s) 1 GB) DDR3, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
2 GB (1 module(s) 2 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
2 GB (1 module(s) 2 GB) DDR3, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM
4 GB (1 module(s) 4 GB) DDR3, registered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3, unbuffered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3, registered, ECC, 1066 MHz, PC3-8500, DIMM
Memory modules notes
1066 MHz and 1333 MHz memory modules cannot be mixed
Interfaces
USB ports
Graphics (15-pin)
Serial 1 (9-pin)
Serial 2 (9-pin)
LAN / Ethernet (RJ-45)
Service LAN (RJ45)
10 x USB 2.0 (3x front, 4x rear, 3x internal)
1 x VGA
1 x serial RS-232-C, usable for iRMC or system or shared
1 x serial RS-232-C (optional)
1 x Gbit/s Ethernet
1 x dedicated service LAN port for iRMC S2 (10/100 Mbit/s)
Service LAN traffic can be switched to shared onboard Gbit LAN port
Onboard or integrated Controller
RAID Controller
Integrated RAID 0/1 or RAID 5/6 controller for SAS base units (option, occupies one PCIe slot).
See under Components RAID controller
Page 3 / 8
http://ts.fujitsu.com/Primergy
Datasheet Fujitsu PRIMERGY TX150 S7 Mono-Socket Intel® Xeon® processor server
Onboard or integrated Controller
SATA Controller
Intel® 3420 Ibex Peak PCH Platform Control Hub, 2 ports used for accessible drives
4 port for internal SATA HDDs with RAID 0, 1, 10 for Windows and Linux;
Remote Management Controller
Integrated Remote Management Controller (iRMC S2, 32 MB attached memory incl. graphics controller), IPMI 2.0
compatible
Trusted Platform Module (TPM)
Infineon / 1.2 (option)
Slots
PCI Express 2.0 x1 (mech. x4)
PCI-Express 2.0 x4 (mech. x8)
PCI-Express 2.0 x8
PCI slots
Slot Notes
2 x short
1 x Low profile ready, full height, long 3,3 V
2 x short 3,3V
1 x PCI 32/33 MHz, 1x long, 5V
in SAS configuration 1x PCI-Express occupied by modular RAID controller.
Drive bays
Hard disk bay configuration
Accessible drive bays
Notes accessible drives
4x 3.5-inch, for SAS / SATA or 8x 2.5-inch for SAS/SATA/SSD optional
3 x 5.25/1.6-inch
all possible options described in relevant system configurator
Number of fans
Fan configuration
1
1 standard fan
Operating panel
Operating buttons
Status LEDs
Service display
BIOS
BIOS features
On/off switch
NMI button
Reset button
System status (amber / yellow)
Identification (blue)
Hard disks access (green)
Power (amber / green)
At system rear side:
System status (amber / yellow)
Identification (blue)
LAN connection (green)
LAN speed (green / yellow)
Optional:
ServerView Local Service Panel (LSP)
ServerView Local Service Display (LSD)
ROM based setup utility
Recovery BIOS
BIOS settings save and restore
Local BIOS update from USB device
Online update tools for main Windows and Linux versions
Local and remote update via ServerView Update Manager
SMBIOS V2.4
Remote PXE boot support
Remote iSCSI boot support
Certified or supported operating systems
Certified or supported operating
Microsoft® Windows Server® 2008 R2 (containing Hyper-V)
Microsoft® Windows Server® 2008
systems
Novell SUSE Linux Enterprise Server
Red Hat Enterprise Linux
VMware vSphere 4.1
Note: Support of other Linux derivatives on demand
Operating system release link
http://docs.ts.fujitsu.com/dl.aspx?id=a9e600b9-e4cb-4f48-aa41-632f69058421
Page 4 / 8
http://ts.fujitsu.com/Primergy
Datasheet Fujitsu PRIMERGY TX150 S7 Mono-Socket Intel® Xeon® processor server
Server Management
Standard
Option
Server Management notes
Dimensions / Weight
Floor-stand (W x D x H)
Rack (W x D x H)
Dimension notes
Height Unit Rack
Weight
Weight notes
Rack integration kit
ASR&R Automatic Server Recovery and Restart
PDA Prefailure Detection and Anaylsis
Online update packages for BIOS, firmware drivers and ServerView Agents
ServerView Integration solutions for Microsoft SMS, MOM, SCOM, SCCM and Altiris
Deployment Solution ServerView Deployment Manager (fully functional 30-day trial version)
ServerView Deployment Manager (fully functional 30-day trial version)
iRMC S2 Advanced Pack
ServerView Integration for Tivoli TEC®, Tivoli NetView, HP NNM and HP Operations Manager
Regarding Operating System dependencies and product details for ServerView Suite Software Products see dedicated
Product Data sheets.
205 x 584 x 444 mm
482 x 570 x 220 mm
Floorstand Width 306 mm with tilt protection; depth measured excludes handles on redundant PSU. Rack depth excludes
handles of redundant PSU and rack front.
5U
21-28 kg
Actual weight may vary depending on configuration
Rack integration kit as option
Dimensions / Weight / Environmental
(Base unit specific)
Environmental
Noise emission
Sound pressure (LpAm)
Sound power (LWAd; 1B = 10dB)
Noise notes / description
Measured according to ISO 7779 and declared according to ISO 9296
SATA: 24 dB(A) idle mode/ 25 dB(A) operation mode; SAS: 31 dB(A) idle mode/ 33 dB(A) operation mode
SATA: 4.2 B idle mode/ 4.2 B operation mode ; SAS: 4.9 B idle mode/ 5.1 B operation mode
May vary according to configuration
Operating ambient temperature
Operating relative humidity
Operating environment
Operating environment Link
10 - 35°C
10 - 85 % (non condensing)
FTS 04230 – Guideline for Data Center (installation locations)
http://docs.ts.fujitsu.com/dl.aspx?id=e4813edf-4a27-461a-8184-983092c12dbe
Electrical values
Power supply configuration
Standard power supply output
Hot-plug power supply output
Hot-plug power supply redundancy
Rated voltage range
Rated frequency range
Rated current max.
Rated current in basic configuration
Active power (min. configuration)
Active power (max. configuration)
Apparent power (max. configuration)
Heat emission
Base unit specific:
1x standard power supply or1x hot-plug power supply or 2x hot plug power supply for redundancy
350W (85% efficiency)
450W (89% efficiency)
Yes
100 - 240 V
47 - 63 Hz
6A - 3A The rated current in basic configuration values are pending confirmation.
1.9 A - 0.8 A
80 W
258 W
81 VA - 258 VA (max. active power and max. apparent power values are configuration dependent) VA
928.8 kJ/h (880.3 BTU/h)
Energy Star ® 1.0 certified configurations
The following products use less energy and reduce greenhouse gas emissions by meeting the strict Energy Star guidelines.
PRIMERGY TX150 S7 E-StarFam1 (Dual-Core CPUs with standard PSU)
PRIMERGY TX150 S7 E-StarFam2 (Quad-Core CPUs with hot plug PSU)
http://ts.fujitsu.com/products/standard_servers/e_efficient.html
Compliance
Germany
Page 5 / 8
TÜV GS
http://ts.fujitsu.com/Primergy
Datasheet Fujitsu PRIMERGY TX150 S7 Mono-Socket Intel® Xeon® processor server
Compliance
Europe
USA/Canada
Global
Japan
Russia
China
Australia/New Zealand
Taiwan
Compliance notes
Compliance link
CE Class A *
CE label according to EU directives: Low-Voltage Directive 2006/95/EC, Electromagnetic Compatibility
2004/108/EC
EN 300386
EN 50371
EN 55022
EN 55024
EN 60950 - 1
EN 61000-3-2 JEIDA
EN 61000-3-3
CSAc/us
ULc/us
FCC Class A
CB
RoHS (Restriction of hazardous substances)
WEEE (Waste electrical and electronical equipment)
VCCI Class A + JIS 61000-3-2
GOST-R
CCC (G 4943/ GB 9245 / GB 17625)
C-Tick (AS / NZS CISPR 22 Class A)
BSMI Class A (CNS 13438, CNS 14336)
CNS 13436
There is general compliance with the safety requirements of all European countries and North America. National approvals
required in order to satisfy statutory regulations or for other reasons can be applied for on request.
Additional compliance with: Kenya:KEBS; Kuwait: KUCAS; Nigeria:SONCap; South Africa:SABS; Belarus: STB; Kazahkstan:
GOST-K; Ukraine: SEMPRO
* Warning:
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may
be required to take adequate measures.
https://sp.ts.fujitsu.com/sites/certificates/default.aspx
Components
Hard disk drives
Page 6 / 8
SSD SATA, 3 Gb/s, 64 GB, SLC, hot-plug, 2.5-inch, enterprise
SSD SATA, 3 Gb/s, 32 GB, SLC, hot-plug, 2.5-inch, enterprise
HDD SATA, 3 Gb/s, 750 GB, 7200 rpm, hot-plug, 3.5-inch, business critical
HDD SATA, 3 Gb/s, 500 GB, 7200 rpm, hot-plug, 3.5-inch, business critical
HDD SATA, 3 Gb/s, 500 GB, 7200 rpm, hot-plug, 2.5-inch, business critical
HDD SATA, 3 Gb/s, 320 GB, 5400 rpm, hot-plug, 2.5-inch, economic
HDD SATA, 3 Gb/s, 250 GB, 7200 rpm, hot-plug, 3.5-inch, business critical
HDD SATA, 3 Gb/s, 160 GB, 7200 rpm, hot-plug, 3.5-inch, economic
HDD SATA, 3 Gb/s, 160 GB, 7200 rpm, hot-plug, 2.5-inch, business critical
HDD SATA, 3 Gb/s, 160 GB, 5400 rpm, hot-plug, 2.5-inch, economic
HDD SATA, 3 Gb/s, 2 TB, 7200 rpm, hot-plug, 3.5-inch, business critical
HDD SATA, 3 Gb/s, 1 TB, 7200 rpm, hot-plug, 3.5-inch, business critical
HDD SAS, 6 Gb/s, 600 GB, 15000 rpm, hot-plug, 3.5-inch, enterprise
HDD SAS, 6 Gb/s, 450 GB, 15000 rpm, hot-plug, 3.5-inch, enterprise
HDD SAS, 6 Gb/s, 300 GB, 15000 rpm, hot-plug, 3.5-inch, enterprise
HDD SAS, 6 Gb/s, 300 GB, 10000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 146 GB, 15000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 146 GB, 10000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 6 Gb/s, 73 GB, 15000 rpm, hot-plug, 2.5-inch, enterprise
HDD SAS, 3 Gb/s, 146 GB, 15000 rpm, hot-plug, 3.5-inch, enterprise
http://ts.fujitsu.com/Primergy
Datasheet Fujitsu PRIMERGY TX150 S7 Mono-Socket Intel® Xeon® processor server
Hard disk notes
One Gigabyte equals one billion bytes, when referring to hard disk drive capacity.
Accessible capacity may vary, also depending on used software
No mix of SAS and SATA HDDs possible
Tape Drives
DDS Gen5, 36 GB, 3 MB/s, half height, USB 2.0
DDS Gen6, 80 GB, 6 MB/s, half height, USB 2.0
LTO2HH Ultrium, 200 GB, 24 MB/s, half height, SAS 3Gb/s
LTO3HH Ultrium, 400 GB, 60 MB/s, half height, SAS 3Gb/s
LTO4HH Ultrium, 800 GB, 120 MB/s, half height, SAS 3Gb/s
RDX Drive, 80 GB, 160 GB, 320 GB, 500 GB, 25 MB/s, half height, USB 2.0
Optical drives
Blu-ray Disc™ Combo Drive, (2x BD-ROM; 8x DVD; 24x CD), slimline, SATA I
DVD-ROM, (16xDVD; 48xCD), half height, SATA I
DVD Super Multi, (16xDVD, 8xDVD+RW 6xDVD-RW, 12xDVD-RAM; 48xCD, 32xCD-RW), half height, SATA I
DVD Super Multi, (8xDVD/DVD+RW, 6xDVD-RW, 5xDVD-RAM; 24xCD/CD-R, 16xCD-RW), slimline, SATA I
SCSI / SAS Controller
SCSI Ctrl. 320 MB 1ch int/ext PCIe x1
SAS Ctrl. 3 Gb 4 ports int. / 4 ports ext. PCIe x4
RAID Controller
RAID 5/6 Ctrl., HDD SAS 6 Gb, LSI , 8 ports ext.
RAID level: 0, 1, 10, 5, 50, 6, 60, 512 MB Cache, optional BBU (based on LSI SAS2108)
Integrated RAID 5/6 Ctrl., HDD SAS 6 Gb, Fujitsu , 8 ports int.
RAID level: 0, 1, 10, 5, 50, 6, 60, 512 MB Cache, optional BBU (based on LSI SAS2108)
Integrated RAID 0/1 Ctrl., SAS/SATA 6 Gb, Fujitsu , 8 ports int.
RAID level: 0, 1, 10, no BBU support (based on LSI SAS2008)
Integrated RAID 0/1 Ctrl., SAS/SATA 3 Gb, 8 ports int.
RAID level: 0, 1, 1E, no BBU support (based on LSI 1068e)
Integrated RAID 0/1 Ctrl., SAS/SATA 3 Gb, 4 ports int.
RAID level: 0, 1, 1E, no BBU support , for internal SAS tapes (based on LSI 1064e)
LAN Controller
Ethernet Ctrl. 1 x 1 Gb Intel® Gigabit CT Desktop Adapter
Ethernet Ctrl. 1 x 1 Gb Intel® PRO/1000 PF Server Adapter
Ethernet Ctrl. 1 x 1 Gb Intel® PRO/1000 PT Server Adapter
Ethernet Ctrl. 2 x 10 Gb Intel® Ethernet Server Adapter X520-DA2
Ethernet Ctrl. 2 x 1 Gb Fujitsu Eth Ctrl 2x1Gbit PCIe x4 D2735 Cu
Ethernet Ctrl. 2 x 1 Gb Intel® PRO/1000 PT Dual Port Server Adapter
Ethernet Ctrl. 4 x 1 Gb Fujitsu Eth Ctrl 4x1Gbit PCIe x4 D2745 Cu
Ethernet Ctrl. 4 x 1 Gb Intel® PRO/1000 PT Quad Port Server Adapter
Rack infrastructure
Cable Arm 2U for 3rd party racks
Cable Management for 19-inch DataCenter / PRIMECENTER Racks
Rackmount kit full extraction (760mm), tool less mounting
Warranty
Standard Warranty
1 year
Service level
On-site Service (depending on country)
Maintenance and Support Services - the perfect extension
Recommended Service
7x24, Onsite Response Time: 4h - For locations outside of EMEA please contact your local Fujitsu partner.
Spare Parts availability
5 years
Service Weblink
http://ts.fujitsu.com/Supportservice
Page 7 / 8
http://ts.fujitsu.com/Primergy
Datasheet Fujitsu PRIMERGY TX150 S7 Mono-Socket Intel® Xeon® processor server
Fujitsu platform solutions
More information
Copyrights
In addition to Fujitsu PRIMERGY TX150 S7,
Fujitsu provides a range of platform solutions.
They combine reliable Fujitsu products with
the best in services, know-how and worldwide
partnerships.
Learn more about Fujitsu PRIMERGY TX150 S7,
please contact your Fujitsu sales representative
or Fujitsu Business partner, or visit our website.
http://ts.fujitsu.com/Primergy
All rights reserved, including intellectual property
rights. Changes to technical data reserved.
Delivery subject to availability. Any liability that
the data and illustrations are complete, actual or
correct is excluded.
Designations may be trademarks and/or
copyrights of the respective manufacturer,
the use of which by third parties for their own
purposes may infringe the rights of such owner.
For further information see http://ts.fujitsu.com/
terms_of_use.html
Copyright © Fujitsu Technology Solutions
Dynamic Infrastructures
With the Fujitsu Dynamic Infrastructures
approach, Fujitsu offers a full portfolio of IT
products, solutions and services, ranging
from clients to datacenter solutions, Managed
Infrastructure and Infrastructure as-a-Service.
How much you benefit from Fujitsu technologies
and services depends on the level of cooperation
you choose. This takes IT flexibility and efficiency
to the next level.
Computing Products
www.fujitsu.com/global/services/computing/
Software
www.fujitsu.com/software/
Fujitsu green policy innovation
Fujitsu Green Policy Innovation is our worldwide
project for reducing burdens on the environment.
Using our global know-how, we aim to resolve
issues of environmental energy efficiency
through IT.
Please find further information at http://www.
fujitsu.com/global/about/environment/
Disclaimer
Technical data are subject to modification and
delivery subject to availability. Any liability that
the data and illustrations are complete, actual
or correct is excluded. Designations may be
trademarks and/or copyrights of the respective
manufacturer, the use of which by third parties
for their own purposes may infringe the rights of
such owner
CONTACT
FUJITSU LIMITED
Mies-van-der-Rohe-Straße 8
80807 München
Germany
Website: www.ts.fujitsu.com
2010-10-06 CE-EN
Page 8 / 8
http://ts.fujitsu.com/Primergy