Hewlett Packard Enterprise V-M200

HP V-M200 802.11n Access Point Series
Product overview
Key features
The HP V-M200 802.11n Access Point provides
wireless connectivity for your expanding network.
Take full advantage of the next-generation IEEE
802.11n standard with the V-M200 access point's
dual-band capability while simultaneously supporting
IEEE 802.11a or 802.11b/g devices. The new
Web user interface makes the V-M200 access point
easy to set up, yet retains key functionality to keep
your sensitive data secure.
b
IEEE 802.11a/b/g/n access point
b
Single radio, dual band (2.4 GHz and 5 GHz)
b
Independently managed
b
Easy-to-use Web user interface
b
Powered by 802.3af PoE or included power
supply
Features and benefits
Management
• NEW Secure and easy-to-use Web UI:
– Quick setup page: consolidates key settings
into one page for simple and rapid configuration
for common deployment scenarios
– HTTPS secured management sessions:
prevent management sessions from being
observed on the network
• Integration with HP PCM: enables discovery
and mapping via HP PCM, available as a free
download from the Web; provides all the basic
tools needed to handle a network effectively,
along with a 60-day trial version of HP PCM+
• IEEE 802.1AB Link Layer Discovery
Protocol (LLDP): automated device discovery
protocol provides easy mapping by network
management applications
• Manager, operator privilege levels:
provides read-only (operator) and read-write
(manager) access levels for Web management
Connectivity
• NEW Fully IEEE 802.11n-compliant
dual-band access point:
– 2.4 GHz frequency band support: uses
your IEEE 802.11n wireless clients alongside
legacy IEEE 802.11b/g devices
– 5 GHz frequency band support: operates
your IEEE 802.11n and 802.11a devices in the
5 GHz spectrum, which has less interference
from microwave ovens, Bluetooth® devices, and
cordless phones
• IEEE 802.3af PoE-powered device (PD)
option: simplifies deployment and dramatically
reduces installation costs by helping to eliminate
the time and cost involved in supplying local
power at each access point location
• Service-class segmentation:
– Up to four SSIDs (one per wireless
community): allows administrator to identify
multiple service sets for clients to access
– Up to four VLANs (one per wireless
community): IEEE 802.1Q VLAN tagging
provides security between workgroups
– Wireless community-based
prioritization: allows the administrator to help
ensure that key network traffic is prioritized by
weighting specific wireless communities
• Auto Channel Select (ACS): helps reduce
radio co-channel interference by automatically
selecting an unoccupied radio channel
• Wireless Distribution System (WDS)
modes:
– Access Point and WDS Bridge, Access
Point Only, WDS Bridge Only, and
Monitor: allow HP V-M200 802.11n Access
Points to connect wirelessly to other HP V-M200
802.11n Access Points without a wired
backbone; this is useful for extending the
network across areas where no wired
infrastructure exists
• Interoperability: meets Wi-Fi Alliance
certifications, including IEEE 802.11n Wi-Fi and
WPA2 to help provide multivendor interoperability
• Three external 3x3 MIMO
omni-directional antennas: enable the
antennas to be configured for improved radio
coverage and performance
• Quality of Service management:
– IEEE 802.1p: maps WMM prioritization to
IEEE 802.1p queues on the wired network
– Wireless community-based
prioritization: allows users to prioritize traffic
based on wireless community (SSID)
– DiffServ: prioritizes data based on the traffic
class
• Auto-MDIX: automatically adjusts for
straight-through or crossover cables on the
10/100/1000 port
• Spanning Tree Protocol (IEEE 802.1D):
prevents network loops
Mobility
• Four wireless communities: consolidates
Quality of Service, security, and VLAN settings into
one easy-to-manage identifier per SSID
2
Security
Monitor and diagnostics
• AP client access control functions:
• Diagnostic:
– IEEE 802.1X authentication using EAP-SIM,
EAP-FAST, EAP-TLS, EAP-TTLS, and PEAP
– Client event log records association,
authentication, and DHCP events
– MAC address authentication using local or
RADIUS access lists
– Packet capture tool for Ethernet and IEEE 802.11
interfaces (PCAP format)
– RADIUS AAA using EAP-MD5, PAP, CHAP, and
MS-CHAPv2
– Data rate matrix
– Remote SYSLOG
– Layer 2 wireless client isolation
• RADIUS-based MAC authentication:
authenticates a wireless client with a RADIUS
server based on the MAC address of the client;
this is useful for clients with minimal or no user
interface
• Choice of IEEE 802.11i, Wi-Fi Protected
Access 2 (WPA2), or WPA: locks out
unauthorized wireless access by authenticating
users prior to granting network access; robust
Advanced Encryption Standard (AES) or Temporal
Key Integrity Protocol (TKIP) encryption secures the
data integrity of the wireless traffic
• Secure Sockets Layer (SSL): encrypts all HTTP
traffic, allowing secure access to the
browser-based management interface of the
access point
Warranty and support
• Lifetime warranty: for as long as you own the
product with advance replacement and
next-business-day delivery (available in most
countries)*
• Electronic and telephone support: limited
electronic and telephone support is available from
HP; refer to www.hp.com/networking/warranty
for details on the support provided and the period
during which support is available
• Software releases: refer to
www.hp.com/networking/warranty for details on
the software releases provided and the period
during which software releases are available for
your product(s)
• Local wireless bridge client traffic
filtering: when enabled, prevents communication
between wireless devices associated with the same
access point
• Closed system: restricts broadcast of SSID as a
security measure to conceal presence of the
wireless network; access point does not respond to
the wireless client probe request of "ANY"
• Management password: provides security so
that only authorized access to the Web browser
interface is allowed
• Wired Equivalent Privacy (WEP) using 40
or 120 static or dynamic keys: provides
backward compatibility for legacy clients
• Rogue AP detection: identifies all access points
in range; known or trusted access points can be
saved, allowing network administrators to identify
unauthorized access points
*Hardware warranty replacement for as long as you own the product, with next business day advance replacement (available in most countries) with a five-year hardware
warranty replacement for the disk drive included with HP AllianceONE Services zl Module, HP Threat Management Services zl Module, HP PCM+ Agent with AllianceONE
Services zl Module, and HP E-MSM765 zl Mobility Controller. For details, refer to the HP Software License, Warranty, and Support booklet at
www.hp.com/networking/warranty.
3
HP V-M200 802.11n Access Point Series
Specifications
HP V-M200 802.11n Access Point (US) (J9467A)
HP V-M200 802.11n Access Point (WW) (J9468A)
1 RJ-45 auto-sensing 10/100/1000 port (IEEE 802.3 Type 10Base-T, IEEE
802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T); Media Type:
Auto-MDIX; Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
1 RJ-45 auto-sensing 10/100/1000 port (IEEE 802.3 Type 10Base-T, IEEE
802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T); Media Type:
Auto-MDIX; Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
AP characteristics
Radios
Single (n/a/b/g)
Single (n/a/b/g)
Radio operation modes
Client access, Packet capture, Client bridge
Client access, Packet capture, Client bridge
AP operation modes
Autonomous
Autonomous
Wi-Fi Alliance Certification
a/b/g/n Wi-Fi Certified
a/b/g/n Wi-Fi Certified
Physical characteristics
Dimensions
5.04(d) x 7.68(w) x 1.26(h) in. (12.8 x 19.5 x 3.2 cm)
5.04(d) x 7.68(w) x 1.26(h) in. (12.8 x 19.5 x 3.2 cm)
Weight
0.84 lb. (.39 kg)
0.84 lb. (.39 kg)
Enclosure
Indoor
Indoor
Environment
Operating temperature
32°F to 104°F (0°C to 40°C)
32°F to 104°F (0°C to 40°C)
Operating relative humidity
15% to 95% @ 104°F (40°C), non-condensing
15% to 95% @ 104°F (40°C), non-condensing
Non-operating/Storage temperature
-40°F to 158°F (-40°C to 70°C)
-40°F to 158°F (-40°C to 70°C)
Non-operating/Storage relative humidity
15% to 95% @ 149°F (65°C), non-condensing
15% to 95% @ 149°F (65°C), non-condensing
Altitude
up to 15,000 ft. (4.6 km)
up to 15,000 ft. (4.6 km)
Acoustic
Power: 0 dB (no fan)
Power: 0 dB (no fan)
IEEE 802.3af PoE Compliant or included 110-240 V 50/60 Hz external
power supply
1EEE 802.3af PoE Compliant or included 110-240 V 50/60 Hz external
power supply
Current
0.7 A
0.7 A
Maximum power rating
8.4 W
8.4 W
Antenna
External 2.4/5 GHz 3x3 MIMO omni-directional antennas
External 2.4/5 GHz 3x3 MIMO omni-directional antennas
Number of external antennas
3
3
Ports
Electrical characteristics
Description
Frequency band and Operating channels
US
2.400 - 2.462 GHz (11 channels)
5.150 - 5250 GHz (4 channels)
5.725 - 5.825 GHz (5 channels)
European Union
2.4 - 2.472 GHz (13 channels)
5.150 - 5.240 GHz (4 channels)
Rest of World (Actual channels designated by selecting
country in UI)
2.400
5.150
5.250
5.470
5.725
-
2.472
5.250
5.350
5.700
5.865
GHz
GHz
GHz
GHz
GHz
(13 channels)
(4 channels)
(4 channels)
(11 channels)
(7 channels)
Radio
FCC Part 15.247; FCC Part 15.407 (no DFS)
EN 300 328; EN 301-489-1; EN 301-489-17; EN 301 893 (EU) no DFS;
RSS-210, Issue 7; RSS-Gen, Issue 2; NCCLP0002 (Taiwan)
Safety
UL 60950-1
UL 60950-1; CAN/CSA 22.2 No. 60950-1; IEC 60950-1; EN 60950-1
Emissions
CISPR 22 Class B; EN 55022 Class B; EN 60601-1-2; ICES-003 Class B;
IEC/EN 61000-3-2; IEC/EN 61000-3-3; FCC Part 15, Class B
CISPR 22 Class B; EN 55022 Class B; EN 60601-1-2; ICES-003 Class B;
IEC/EN 61000-3-2; IEC/EN 61000-3-3; FCC Part 15, Class B
RF Exposure
FCC Bulletin OET-65C
RSS-102; EN 50385; EC Council Recommendation 1999/519/EC;
ARPANSA EMR Limits (May 2002)
Features
Single Radio IEEE 802.11n for high-throughput applications and IEEE
802.11a/b/g for legacy support
- IEEE 802.11a/b/g/n Wi-Fi Certified (dual streams)
- Dual-band support (2.4 and 5 GHz)
Single Radio IEEE 802.11n for high-throughput applications and IEEE
802.11a/b/g for legacy support
- IEEE 802.11a/b/g/n Wi-Fi Certified (dual streams)
- Dual-band support (2.4 and 5 GHz)
Services
Refer to the HP website at www.hp.com/networking/services for details on the Refer to the HP website at www.hp.com/networking/services for details on the
service-level descriptions and product numbers. For details about services and service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local HP sales office.
response times in your area, please contact your local HP sales office.
4
HP V-M200 802.11n Access Point Series
Specifications (continued)
HP V-M200 802.11n Access Point (US) (J9467A)
HP V-M200 802.11n Access Point (WW) (J9468A)
Radio characteristics:
IEEE 802.11n 5 GHz @ 40 MHz
Data rate
Receiver sensitivity
Transmit power
MCS0 Mbps
-88 dBm
17 dBm
MCS7 Mbps
-70 dBm
12 dBm
MCS8 Mbps
-88 dBm
17 dBm
MCS15 Mbps
-69 dBm
12 dBm
MCS7 Mbps
-75 dBm
12 dBm
MCS8 Mbps
-92 dBm
17 dBm
MCS15 Mbps
-72 dBm
12 dBm
MCS0 Mbps
-94 dBm
19 dBm
MCS7 Mbps
-77 dBm
11 dBm
MCS8 Mbps
-94 dBm
19 dBm
MCS15 Mbps
-75 dBm
11 dBm
6 Mbps
-92 dBm
17 dBm
54 Mbps
-76 dBm
13 dBm
1 Mbps
-94 dBm
19 dBm
11 Mbps
-91 dBm
19 dBm
6 Mbps
-92 dBm
17 dBm
54 Mbps
-76 dBm
13 dBm
IEEE 802.11n 5 GHz @ 20 MHz
Data rate
Receiver sensitivity
Transmit power
MCS0 Mbps
-94 dBm
17 dBm
IEEE 802.11n 2.4 GHz @ 20 MHz
Data rate
Receiver sensitivity
Transmit power
IEEE 802.11a
Data rate
Receiver sensitivity
Transmit power
IEEE 802.11b
Data rate
Receiver sensitivity
Transmit power
IEEE 802.11g
Data rate
Receiver sensitivity
Transmit power
Standards and protocols
(applies to all products in series)
Mobility
IEEE 802.11a High Speed Physical Layer in the 5
GHz Band
IEEE 802.11b Higher-Speed Physical Layer
Extension in the 2.4 GHz Band
IEEE 802.11g Further Higher Data Rate Extension
in the 2.4 GHz Band
IEEE 802.11i Medium Access Control (MAC)
Security Enhancements
IEEE 802.11n WLAN Enhancements for Higher
Throughput
QoS/Cos
IEEE 802.1P (CoS)
RFC 2474 DSCP Diffserv
5
HP V-M200 802.11n Access Point Series
Specifications (continued)
HP V-M200 802.11n Access Point (US) (J9467A)
HP V-M200 802.11n Access Point (WW) (J9468A)
HP V-M200 802.11n Access Point (US) (J9467A)
800 nS
MCS Index
400 nS
20 MHz Rate (Mbps)
40 MHz Rate (Mbps)
20 MHz Rate (Mbps)
40 MHz Rate (Mbps)
0
6.5
13.5
7.2
15
1
13
27
14.4
30
2
19.5
40.5
21.7
45
3
26
54
28.9
60
4
39
81
43.3
90
5
52
108
57.8
120
6
58.5
121.5
65
135
7
65
135
72.2
157.5
8
13
27
14.4
30
9
26
54
28.9
60
10
39
81
43.3
90
11
52
108
57.8
120
12
78
162
86.7
180
13
104
216
115.6
240
14
117
243
130
270
15
130
270
144.4
300
20 MHz Rate (Mbps)
40 MHz Rate (Mbps)
20 MHz Rate (Mbps)
40 MHz Rate (Mbps)
0
6.5
13.5
7.2
15
1
13
27
14.4
30
2
19.5
40.5
21.7
45
3
26
54
28.9
60
4
39
81
43.3
90
5
52
108
57.8
120
6
58.5
121.5
65
135
7
65
135
72.2
157.5
8
13
27
14.4
30
9
26
54
28.9
60
10
39
81
43.3
90
11
52
108
57.8
120
12
78
162
86.7
180
13
104
216
115.6
240
14
117
243
130
270
15
130
270
144.4
300
HP V-M200 802.11n Access Point (WW) (J9468A)
800 nS
MCS Index
400 nS
6
HP V-M200 802.11n Access Point Series accessories
Power Supply
HP 1-Port Power Injector (J9407A)
HP access points and access
devices are Wi-Fi Certified,
providing our customers with the
assurance that these products
have met and passed the
rigorous interoperability testing
preformed by the Wi-Fi Alliance
Organization. See the
Specifications section of this
series for more information.
Technology for better business outcomes
To learn more, visit www.hp.com/networking
© Copyright 2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject
to change without notice. The only warranties for HP products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions
contained herein. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company
under license.
4AA3-0668ENN, August 2010