PROFESSIONAL
VIDEO SUPPORTS
edition
Manfrotto Video Solutions
This catalog presents Manfrotto’s product range for video.
We offer both traditional support systems and innovative
alternatives backed up by a complete range of accessories,
as well as bags to make transporting your kit a breeze.
At Manfrotto, we’ve been hard at work extending our
undisputed leadership of the photographic support sector
to videography. We’ve teamed up with some of the greatest
names in film and video to develop the technically
innovative, well-designed products that meet and exceed
their demanding expectations.
Our long experience in the world of professional photography ensures product performance and quality, further
guaranteed by the extensive product testing and finetuning carried out by the team at the Manfrotto Technology Center. We’ve focused on developing a video range
capable of exciting and inspiring those who live and breathe
video and in fact, it’s feedback from those same people
that improves every aspect of our products so that they in
turn will help you make the most of all the latest technological developments in the field of video. Once a product is
launched it’s our far-reaching sales and service network
that takes over, helping you make the right choice before
you buy, and making sure you get the after-purchase care
and assistance you need.
We hope you’ll find the catalogue inspiring and useful.
For all the news that’s still too new to print, please visit
www.manfrotto.com
Contents
2
6
SYSTEMS
22
HEADS
30
TRIPODS
40
MONOPODS
42
ALTERNATIVE SUPPORTS
44
REMOTE CONTROL
54
FIG RIG
56
ACCESSORIES
62
BAGS AND STRAPS
66
INDEX
3
SYSTEMS
This section of the catalogue presents the
best matches between products: each system
comprises tripod, head, spreader (when required)
and bag. For each video head we show the ideal
combination with tripods from our PRO range
(with mid-level or ground spreader), MPRO range
(single-leg tripods in carbon fiber and magnesium)
and MDEVE series (lightweight tripods in
aluminium or carbon fiber with our innovative
center column leveling system). All applications
are covered; from heavyduty solutions for
payloads of 16kg (35.2lb) to lightweight systems
for camera equipment up to 2kg (4.4lb).
For all possible combinations of Manfrotto video
products, please check the summary chart at the
end of this section.
To understand the icons, consult the key to symbols on the back page.
4
5
VIDEO HEAD SYSTEMS
SYSTEM 504HD, 546GBK
9kg
19.8lb
Head
Half ball
Tripod
Bag
SYSTEM 504HD, 546BK
9kg
19.8lb
Head
Half ball
Tripod
Bag
6
44cm
17.3in
167.5cm
65.9in
504HDV
546B
MBAG100PN
6.3kg
13.9lb
Spreader
Mid spreader
Feet
-
46.5cm
18.3in
171cm
67.3in
504HD
546GB
MBAG100PN
6.3kg
13.9lb
Spreader
Mid spreader
Feet
-
504HD HEAD SYSTEMS
SYSTEM 504HD, 536K
9kg
19.8lb
Head
Half ball
Tripod
Bag
40cm
15.7in
217.5cm
85.6in
504HD
536
MBAG100PN
6.1kg
13.4lb
Spreader
Mid spreader
Feet
-
SYSTEM 504HD, 535K
9kg
19.8lb
Head
Half ball
Tripod
Bag
40.5cm
15.9in
184cm
72.4in
504HD
535
MBAG100PN
5kg
11lb
Spreader
Mid spreader
Feet
-
7
526 HEAD SYSTEMS
SYSTEM 526, 528XBK
16kg
35.3lb
Head
Half ball
Tripod
Bag
88cm
34.6in
163cm
64.2in
526
528XB
MBAG120PN
11kg
24.2lb
Spreader
Mid spreader
Feet
-
SYSTEM 526, 545GBK
16kg
35.3lb
Head
Half ball
Tripod
Bag
8
47.5cm
18.7in
173cm
68.1in
526
545GB
MBAG100PN
7.1kg
15.7lb
Spreader
Mid spreader
Feet
-
526 HEAD SYSTEMS
SYSTEM 526, 545BK
16kg
35.3lb
Head
Half ball
Tripod
Bag
45cm
17.7in
169cm
66.5in
526
545B
MBAG100PN
7.1kg
15.7lb
Spreader
Mid spreader
Feet
-
SYSTEM 526, 536K
16kg
35.3lb
Head
Half ball
Tripod
Bag
43cm
16.9in
218cm
85.8in
526
536
MBAG100PN
6.8kg
15.1lb
Spreader
Mid spreader
Feet
-
9
519 HEAD SYSTEMS
SYSTEM 519, 546BK
10kg
22lb
Head
Half ball
Tripod
Bag
10
44.5cm
17.5in
169cm
66.5in
519
546B
MBAG100PN
6.2kg
13.7lb
Spreader
Mid spreader
Feet
-
519 HEAD SYSTEMS
SYSTEM 519, 535K
10kg
22lb
Head
Half ball
Tripod
Bag
43cm
16.9in
186cm
73.2in
519
535
MBAG100PN
5.2kg
11.5lb
Spreader
Mid spreader
Feet
-
11
516 HEAD SYSTEMS
SYSTEM 516, 545GBK
10kg
22lb
Head
Half ball
Tripod
Bag
45cm
17.7in
170.5cm
67.1in
516
500BALL
545GB
MBAG100PN
5.5kg
12.1lb
Spreader
Mid spreader
Feet
-
SYSTEM 516, 545BK
10kg
22lb
Head
Half ball
Tripod
Bag
12
43.5cm
17.1in
167.5cm
65.9in
516
500BALL
545B
MBAG100PN
5.8kg
12.8lb
Spreader
Mid spreader
Feet
-
516 HEAD SYSTEMS
SYSTEM 516, 546GBK
10kg
22lb
Head
Half ball
Tripod
Bag
46cm
18.1in
172cm
67.7in
516
500BALL
546GB
MBAG100PN
5.8kg
12.8lb
Spreader
Mid spreader
Feet
350SPRB
565
SYSTEM 516, 535K
10kg
22lb
Head
Half ball
Tripod
Bag
40.5cm
15.9in
178.5cm
70.3in
516
500BALL
535
MBAG100PN
5kg
11lb
Spreader
Mid spreader
Feet
-
13
501HDV HEAD SYSTEMS
SYSTEM 501HDV, 546BK
6 kg
13.2lb
Head
Half ball
Tripod
Bag
14
43.5cm
17.1in
168.5cm
66.3in
501HDV
520BALL
546B
MBAG90PN
5.2kg
11.5lb
Spreader
Mid spreader
Feet
-
501HDV HEAD SYSTEMS
SYSTEM 501HDV, 546GBK
6kg
13.2lb
Head
Half ball
Tripod
Bag
45cm
17.7in
170.5cm
67in
501HDV
520BALL
546GB
MBAG90PN
5.4kg
11.9lb
Spreader
Mid spreader
Feet
-
15
501HDV HEAD SYSTEMS
SYSTEM 501HDV, 535K
6kg
13.2lb
Head
Half ball
Tripod
Bag
39.5cm
15.5in
182.5cm
71.8in
501HDV
520BALL
535
MBAG90PN
3.9kg
8.6lb
Spreader
Mid spreader
Feet
-
SYSTEM 501HDV, 547BK
6kg
13.2lb
Head
Half ball
Tripod
Bag
16
91cm
35.8in
153.5cm
60.4in
501HDV
547B
MBAG100PN
3.9kg
8.6lb
Spreader
Mid spreader
Feet
-
501HDV HEAD SYSTEMS
SYSTEM 501HDV, 755CX3K
5.4kg
11.9lb
Head
Half ball
Tripod
Bag
58cm
22.8in
150.5cm
59.2in
501HDV
755CX3
MBAG80PN
175.5cm
69.1in
Spreader
Mid spreader
Feet
3.5kg
7.8lb
-
SYSTEM 501HDV, 755XBK
5.4kg
11.9lb
Head
Half ball
Tripod
Bag
53cm
20.9in
152cm
59.8in
501HDV
755XB
MBAG80PN
176.5cm
69.5in
Spreader
Mid spreader
Feet
4.1kg
9lb
-
17
701HDV HEAD SYSTEMS
SYSTEM 701HDV, 547BK
4kg
8.8lb
Head
Half ball
Tripod
Bag
18
89cm
35in
151.5cm
59.7in
701HDV
547B
MBAG100PN
3.1kg
6.9lb
Spreader
Mid spreader
Feet
-
701HDV HEAD SYSTEMS
SYSTEM 701HDV, 755CX3K
4kg
8.8lb
Head
Half ball
Tripod
Bag
56cm
22in
148.5cm
58.5in
701HDV
755CX3
MBAG80PN
173.5cm
68.3in
Spreader
Mid spreader
Feet
2.8kg
6.1lb
-
SYSTEM 701HDV, 755XBK
4kg
8.8lb
Head
Half ball
Tripod
Bag
51cm
20.1in
150cm
59.1in
701HDV
755XB
MBAG80N
174.5cm
68.7in
Spreader
Mid spreader
Feet
3.3kg
7.3lb
-
19
700HDV HEAD SYSTEMS
SYSTEM 700RC2, 755CX3K
2.5kg
5.5lb
Head
Half ball
Tripod
Bag
55cm
21.6in
147.5cm
58in
700RC2
755CX3
MBAG70N
172.5cm
67.9in
Spreader
Mid spreader
Feet
2kg
4.4lb
-
SYSTEM 700RC2, 755XBK
2.5kg
5.5lb
Head
Half ball
Tripod
Bag
20
56cm
22in
148.5cm 173.5cm
58.5in
68.3in
700RC2
755XB
MBAG80PN
2.5kg
5.5lb
Spreader
Mid spreader
Feet
-
SYSTEMS
The following chart shows Manfrotto’s recommended
combinations between individual heads, tripods, bags and
accessories for different camera equipment and environmental
conditions. Some of these combinations are shown in the
catalogue as “off the shelf” kits, while for others you can
purchase the individual components and assemble them to
match the specific professional needs that arise. The chart also
makes it clear if any particular combination of video head and
tripod requires a connection adaptor and presents the bestsuited bag or transport/carrying accessory for each combination.
RECOMMENDED
HALF BALL / ADAPTER
HALF BALL NOT NECESSARY
AVAILABLE SYSTEM ON CATALOGUE
SUGGESTED BAG
SYSTEMS
MODELS
501HDV
504HD
516
519
526
701HDV
700RC2
HALF BALL
not necessary
117B
SUGGESTED BAG
MBAG120PN
HALF BALL
528XB
not necessary
SYSTEM
SUGGESTED BAG
526, 528XBK
MBAG120PN
HALF BALL
535
SYSTEM
SYSTEM
SYSTEM
SYSTEM
520BALL
501HDV, 535K
504HD, 535K
516, 535K
519, 535K
SUGGESTED BAG
MBAG90PN
HALF BALL
HALF BALL
520BALL
SYSTEM
520BALL
not necessary
SYSTEM
SUGGESTED BAG
504HD, 536K
SUGGESTED BAG
SUGGESTED BAG
526, 536K
MBAG100PN
MBAG100PN
HALF BALL
536
MBAG90PN
545B
545GB
HALF BALL
ADAPTER
520BALL
319
SYSTEM
319
SYSTEM
SUGGESTED BAG
SUGGESTED BAG
516, 545BK
SUGGESTED BAG
526, 545BK
MBAG100PN
MBAG100PN
ADAPTER
MBAG100PN
HALF BALL
ADAPTER
520BALL
319
SYSTEM
319
SYSTEM
SUGGESTED BAG
SUGGESTED BAG
516, 545GBK
SUGGESTED BAG
526, 545GBK
MBAG100PN
MBAG100PN
SYSTEM
SYSTEM
520BALL
SYSTEM
501HDV, 546BK
504HD, 546BK
SUGGESTED BAG
519, 546BK
ADAPTER
MBAG100PN
HALF BALL
546B
MBAG100PN
HALF BALL
546GB
SYSTEM
SYSTEM
501HDV, 546GBK 504HD, 546GBK
SYSTEM
not necessary
516, 546GBK
SUGGESTED BAG
MBAG100PN
HALF BALL
547B
SYSTEM
SYSTEM
not necessary
501HDV, 547BK
701HDV, 547BK
SUGGESTED BAG
MBAG100PN
755XB
755CX3
SYSTEM
501HDV, 755CX3K
SYSTEM
501HDV, 755XBK
SYSTEM
SYSTEM
701HDV, 755CX3K 700RC2, 755CX3K
SYSTEM
SYSTEM
701HDV, 755XBK 700RC2, 755XBK
21
HEADS
The 504HD is Manfrotto’s latest video fluid
head. It is a perfect balance of design and
performance. The bridge design improves the
head’s rigidity and its PAN friction control is
fast, simple to fine-tune and protected from
knocks. All structural components are made
from aluminium, with the PAN axis rotation unit
using ball bearings to obtain smooth, totally
vibration-free controlled movements that can
be directly adjusted using the head’s FDS
variable friction system. FDS on both the
PAN and TILT axes also ensures that the
head works perfectly at all temperatures, with
all types of equipment and under all loads.
Ergonomically improved lever and dial designs
combine with the new friction index to give
you complete control over the 504HD.
The 504HD has been designed to offer a load
capacity of up to 7.5kg (16.5lb) making it
suitable for a huge range of camera equipment.
The CBS counterbalance system has 4
presets for a full range of camera weights
(0, 2.5kg-5.5lb, 5kg-11lb and 7.5kg-16.5lb).
Leveling the head is easy thanks to the 75mm
diameter hemisphere and the back-lit bubble
level. Two 3/8” threads on the top plate allow
accessories (such as monitors and arms) to
be directly and securely attached to the head,
which helps cut down set-up time, keeps your
camera hot shoe free and, saves you from
using another clamp.
The 504HD is suitable for Manfrotto PRO
series video tripods with mid-level or ground
spreaders and for carbon fiber single-leg
MPRO tripods.
Wider, longer platform for your camera and accessories.
High rigidity structure delivers maximum response and strength.
Ergonomic controls for easy use in all conditions.
Easy-link connections for accessories.
4-step counterbalance system ensures a quick set-up with optimal balance.
Ball Bearing drag system for precise, smooth movements.
Light weight modern materials for optimum balance of strength and weight.
22
HEADS
variable
variable
PRO FLUID VIDEO HEAD 504HD
1 Pan drag control
2 Pan locking knob
3 Illuminated leveling
bubble
The 504HD fluid head combines a high-performing fluidity with a wide variety
of professional features: 4-step counterbalance system, ergonomic tilt drag
and locking knobs all on the left side of the head, illuminated leveling bubble,
replaceable pan-bar rosette, maintaining existing professional features.
A compact, professional, high-performing fluid head for the latest generation
of HD cameras up to 7.5kg (16.5lb).
Available systems on pages 6 and 7.
1
3
2
7.5kg
16.5lb
15.5cm
6.in
2.9kg
6.4lb
504PLONG
1 Tilt locking knob
2 Tilt drag knob
3 Sliding plate safety
release button
3
Height of center gravity from plate mm
COUNTERBALANCE GRAPH
100
90
1
80
2
70
55
40
30
1 Counterbalance
adjustment knob
2 Sliding quick
release plate
3 Sliding quick
release knob
20
10
0
2.5
5.5
5
11
7.5
16.5
10
22
12.5
27.6
15
33.1
2
3
Payload kg / lb
1
TECHNICAL SPECIFICATIONS
Head base
Pan drag type
Tilt drag type
Counterbalance system
Counterbalance power
Leveling bubble
Pan bar
SUGGESTED ACCESSORIES
75mm ball
Fluid variable (from 0 to max level)
Fluid variable (from 0 to max level)
Variable
2.5 - 5- 7.5kg (5.5 - 11 - 16.5lb)
Yes (illuminated with led)
1 telescopic
Replaceable pan bar rosette
Plate type
Plate travel
Plate attachment
Pan range
Tilt range
Temperature range
Yes
Quick release
83mm
3/8” and 1/4” camera screws
360°
+90° -60°
-20° C +60° C
Additional pan bar
Compatible plate
Compatible half bowl
504HLV
-
23
HEADS
variable
variable
PRO FLUID VIDEO HEAD 526
1 Pan locking knob
2 Pan drag control
3 Spirit level
The 526 Pro Video head directly addresses the heavy-duty, high-end ENG
and EFP video market by offering a feature-packed fluid video head. Large
rubber padded knobs for better grip and all the controls (tilt and pan lock,
tilt drag) are located on the left side so they can be easily found. The 526
offers our most precise fluid drag system comprised of three step settings
for low, medium and high drag levels (numbered 1, 2 and 3), plus the
additional no-drag setting (number 0) for such occasions as snap-pans/tilts.
Counterbalance is achieved through an adjustable spring for camera weights
between 8kg (17.6lb) and 15kg (33lb). Available systems on pages 8 and 9.
16kg
35.3lb
15cm
5.9in
3.6kg
7.9lb
3
1
2
1 Tilt locking knob
2 Tilt drag knob
3 Counterbalance
adjustment knob
357PLV
Height of center gravity from plate mm
COUNTERBALANCE GRAPH
3
300
1
Minimum
275
Maximum
250
225
2
200
175
150
1 Sliding plate safety
release button
2 Sliding quick release plate
3 Sliding quick release knob
4 Interchangeable
pan bar rosette
125
100
75
50
4
8.8
5
6
7
8
9 10 11 12 13 14 15 16
11 13.2 15.4 17.6 19.8 22 24.2 26.5 28.7 30.9 33.1 35.3
Payload kg / lb
4
TECHNICAL SPECIFICATIONS
Head base
Pan drag type
Tilt drag type
Counterbalance system
Counterbalance power
Leveling bubble
Pan bar
24
3
2
1
SUGGESTED ACCESSORIES
100mm ball
0 plus - 3 step
0 plus - 3 step
Variable
8 - 15kg (17.6 - 33lb) continuosly variable
Yes
1 telescopic
Replaceable pan bar rosette
Plate type
Plate travel
Plate attachment
Pan range
Tilt range
Temperature range
Yes
Quick release
80mm
2x3/8” and 2x1/4” camera screws
360°
+75°-70°
-20° C +60° C
Additional pan bar
Compatible plate
Compatible half bowl
519LV
357PLONG
Not needed
HEADS
variable + interchangeable springs
variable
PRO FLUID VIDEO HEAD 519
1 Pan locking knob
2 Pan drag control
3 Spirit level
The most versatile head in the Manfrotto range, the 519 is a compact heavy
duty fluid head capable of accommodating a counterbalance payload from
1.5kg (3.3lb) up to 9kg (19.8).
Being the first in the market encompassing both interchangeable and
adjustable counter-balance springs, this revolutionary head allows to easily
interchange a vast array of cameras of various weights as well as quickly fine
tune the perfect balance point of whatever camera and accessories being used.
In addition, the fluid drag is easily controlled with a large clickstop numbered
knob in seven increments.
Available systems on pages 10 and 11.
10kg
22lb
15cm
5.9in
2.9kg
6.4lb
2
3
1
1 Tilt locking knob
2 Tilt drag knob
3 Counterbalance
adjustment knob
501PL
1
Height of center gravity from plate mm
COUNTERBALANCE GRAPH
275
Minimum
250
3
Maximum
225
200
Minimum
175
Maximum
2
150
125
100
1 Sliding plate safety
release button
2 Sliding quick
release plate
3 Sliding Quick
release knob
4 Interchangeable
pan bar rosette
75
50
25
0
0
1.5
3.3
3 4 5 6 7 8 9 10 11 12 13 14 15 16
6.6 8.8 11 13.2 15.4 17.6 19.8 22 24.2 26.5 28.7 30.9 33.1 35.2
Payload kg / lb
2
3
1
4
Balance springs supplied with head
5kg
11lb
9kg
19.8lb
TECHNICAL SPECIFICATIONS
Head base
Pan drag type
Tilt drag type
Counterbalance system
Counterbalance power
Leveling bubble
Pan bar
SUGGESTED ACCESSORIES
75mm ball
Fluid variable (1-7 steps)
Fluid variable (1-7 steps)
Variable + interchangeable springs
1.5 - 9kg (3.3 - 19.8lb) continuosly variable
Yes
1 telescopic
Replaceable pan bar rosette
Plate type
Plate travel
Plate attachment
Pan range
Tilt range
Temperature range
Yes
Quick release
58mm
3/8” and 1/4” camera screws
360°
+90° -90°
-20° C +60° C
Additional pan bar
Compatible plate
Compatible half bowl
519LV
504PLONG
Not needed
25
HEADS
fixed
variable
PRO FLUID VIDEO HEAD 516
1 Pan locking knob
2 Pan drag control
3 Spirit level
Compact and reliable, able to support cameras up to 10kg (22lb) , the 516
is a not a high performing head equipped with fluid cartridges that provide
continuous adjustable drag control. This system gives quite a wide range of
friction control down to “zero drag” and operates on both pan and tilt axis.
Available systems on pages 12 and 13.
10kg
22lb
12.5cm
4.9in
2kg
4.4lb
2
357PLV
1
3
1 Tilt locking lever
2 Tilt friction
1
Height of center gravity from plate mm
COUNTERBALANCE GRAPH
2
200
175
150
125
1 Sliding plate safety
release button
2 Sliding quick
release plate
100
75
50
0.5 1 2 3 4 5 6
1.1 2.2 4.2 6.6 8.8 11 13.2
7.5
16.3
9 10 11 12 13 14
19.8 22 24.2 26.5 28.7 30.9
2
Payload kg / lb
1
TECHNICAL SPECIFICATIONS
Head base
Pan drag type
Tilt drag type
Counterbalance system
Counterbalance power
Leveling bubble
Pan bar
26
SUGGESTED ACCESSORIES
Flat base with 3/8” female thread
Fluid variable (from 0 to max level)
Fluid variable (from 0 to max level)
Fixed
7.5kg (16.5lb)
Yes
2 telescopic
Replaceable pan bar rosette
Plate type
Plate travel
Plate attachment
Pan range
Tilt range
Temperature range
No
Quick release
80mm
2x3/8” and 2x1/4” camera screws
360°
+90° -60°
-20° C +60° C
Additional pan bar
Compatible plate
Compatible half bowl
357PLONG
520BALL
500BALL
HEADS
on/off
fixed + variable teflon friction
PRO VIDEO HEAD 501HDV
1 Pan drag control
2 Pan locking knob
3 Spirit level
Taking its inspiration from our top professional video head models, the
501HDV features a fixed counterbalance spring set for a typical weight of
camera + accessories of 2.5kg (5.5lb) that helps ensure both smoother
tilt movements and greater equipment safety even when tilt locks are
inadvertently left off. The easy-to-reach on/off switch allows the counterbalance system to be disengaged or re-engaged for different filming setups.
With its improved design, the 501HDV head offers more ergonomics with
locks and knobs that allow a more solid grip and better fingertip control.
Available systems on pages 14, 15, 16 and 17.
6kg
13.2lb
1.6kg
3.5lb
11.5cm
4.5in
1
2
3
501PL
1 Spring loaded
counterbalance (ON/OFF)
2 Tilt friction knob
Height of center gravity from plate mm
COUNTERBALANCE GRAPH
2
1
200
175
150
125
1 Tilt locking knob
2 Sliding quick
release plate
3 Sliding plate safety
release button
100
75
50
0.5 1
1.1 2.2
3
2
2.5
5.5
4 5 6 7 8 9 10 11 12 13 14
8.8 11 13.2 15.4 17.6 19.8 22 24.2 26.5 28.7 30.9
1
Payload kg / lb
TECHNICAL SPECIFICATIONS
Head base
Pan drag type
Tilt drag type
Counterbalance system
Counterbalance power
Leveling bubble
Pan bar
SUGGESTED ACCESSORIES
Flat base with 3/8” female thread
Variable Teflon friction
Variable Teflon friction
On/Off
2.5kg (5.5lb)
Yes
1
Replaceable pan bar rosette
Plate type
Plate travel
Plate attachment
Pan range
Tilt range
Temperature range
No
Quick release
58mm
3/8” and 1/4” camera screws
360°
+90° -60°
-10° C +60° C
Additional pan bar
Compatible plate
Compatible half bowl
501HLV
504PLONG
520BALL
27
HEADS
fixed
fixed
MINI VIDEO HEAD 701HDV
1 Pan locking knob
2 Tilt locking knob
3 Spirit level
Specifically developed to support the latest prosumer and professional light
compact HD camcorders, the 701HDV offers an updated design, which
has been created for improved ergonomics with locks and knobs that allow
for a more solid grip and better control, a better fluidity thanks to improved
internal fluid cartridges, a double pan-bar rosette and a bigger sliding plate
to optimize the position of the camera considering its center of gravity.
Available systems on pages 18 and 19.
2
3
1
4kg
8.8lb
0.8kg
1.8lb
9.5cm
3.7in
501PL
1 Sliding quick
release plate
2 Sliding plate safety
release button
3 Sliding quick
release knob
Height of center gravity from plate mm
COUNTERBALANCE GRAPH
300
275
250
1
3
2
225
200
175
150
125
100
75
50
25
0
0
0.5
1.1
1
2.2
1.5
3.3
2
4.4
2.5
5.5
3
6.6
3.5
7.7
4
8.8
Payload kg / lb
SUGGESTED ACCESSORIES
TECHNICAL SPECIFICATIONS
Head base
Pan drag type
Tilt drag type
Counterbalance system
Counterbalance power
Leveling bubble
Pan bar
28
Flat base with 3/8” female thread
1 fixed
1 fixed
Fixed
1.5kg (3.3lb)
Yes
Yes
Replaceable pan bar rosette
Plate type
Plate travel
Plate attachment
Pan range
Tilt range
Temperature range
No
501PL
58mm
1/4” and 3/8” camera screws
360°
+90° -60°
-10° C +60° C
Additional pan bar
Compatible plate
Compatible half bowl
701HLV
501PLONG
-
HEADS
fixed
MINI VIDEO HEAD 700RC2
1 Tilt locking knob
2 Pan locking knob
A compact and lightweight two-way head designed principally to support
the lightest camcorders. Smooth and constant movements on both axes
are assured by a fixed system of fluid cartridges.
Available systems on page 20.
1
2.5.kg
5.5lb
9.6cm
3.7in
0.5kg
1.1lb
200PL-14
2
1 Plate safety
release knob
2 Quick release plate
2
1
TECHNICAL SPECIFICATIONS
Head base
Pan drag type
Tilt drag type
Counterbalance system
Counterbalance power
Leveling bubble
Pan bar
SUGGESTED ACCESSORIES
Flat base with 3/8” female thread
1 fixed
1 fixed
No
No
1
Replaceable pan bar rosette
Plate type
Plate travel
Plate attachment
Pan range
Tilt range
Temperature range
No
Quick release
No
1/4” camera screw
360°
+90° -75°
-10° C +60° C
Additional pan bar
Compatible plate
Compatible half bowl
-
29
TRIPODS
The Manfrotto video tripod range has been created
in order to consider various types of uses and
operator needs, offering both twin-leg and singleleg tripods, using high-performing components
and materials such as carbon fiber, aluminium,
magnesium and high-quality technopolymers. The
choice between twin-leg and single-leg technology depends on the weight of the camera, special
needs in terms of compactness, leg low-angles,
size of the half-bowl, lightness, etc. considering the
different cameras and environments. All the tripods
can be customized with a wide range of suggested
accessories such as mid and ground spreaders,
different feet and dollies.
The PRO tripod family is joined by the new 546,
available in two versions: the 546B with a mid-level
spreader; and the 546GB with a ground-level
spreader. The PRO series fits neatly into the PRO
range of video tripods: it has an aluminium top
casting allowing it to be used with our professional
half-ball video heads with Ø 100mm, 75mm or
60mm fittings; its aluminium twin-strut legs feature
adjustable locking levers that can be tension-set to
guarantee complete locking power even after years
of use and wear; the spiked feet with removable
rubber shoes are suitable for any surface from
smooth, delicate floors to uneven ground.
Built-in half bowl (Ø 100mm, 75mm or
60mm)
Mid or ground spreader for improved
tripod stability.
Spreader length regulation.
New spreader attachment.
Rubber shoes guarantee a better grip on
smooth floors.
30
Newly redesigned collars, integrated
in the overall product ergonomics for
improved rigidity.
PRO_TWIN LEG TRIPODS
PRO HEAVY-DUTY VIDEO TRIPOD 545B
PRO HEAVY-DUTY VIDEO TRIPOD 545GB
Two-stage, extremely rigid, stable tripod. Able to carry loads up to 25kg
(55.1lb). The 545B has a die cast aluminium crown with a built-in 100mm
bowl. The tripod’s telescopic mid-level spreader helps set leg angles
accurately. The leg locks are secure and reliable; spiked feet with rubber
overshoes are provided for solid grounding on both uneven terrain and
smooth floors. The tripod can be used with various dollies.
Accessory code 319 is available as an optional extra to convert the 100mm
bowl into a 75mm bowl.
Two-stage, extremely rigid, stable tripod. Able to carry loads up to 25kg (55.1lb).
The 545GB has a die cast aluminium crown with a built in 100mm bowl.
The tripod’s telescopic ground-level spreader helps set leg angles accurately.
The leg locks are secure and reliable; spiked feet with rubber overshoes are
provided for solid grounding on both uneven terrain and smooth floors.
The tripod can be used with various dollies.
Accessory code 319 is available as an optional extra to convert the 100mm
bowl into a 75mm bowl.
25kg
55.1lb
69cm
27.2in
30cm
11.8in
154cm
60.6in
25kg
55.1lb
3.5kg
7.7lb
TECHNICAL SPECIFICATIONS 545B
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
100mm bowl
No
Lever locks
By mid spreader
From 30° to 66°
100mm bowl
No
Lever locks
By ground spreader
From 29° to 63°
32.5cm
12.8in
158.5cm
62.4in
3.5kg
7.7lb
SUGGESTED ACCESSORIES
Included mid spreader
Included ground spreader
Included spike foot shoes
Yes
No
Yes
Included mid spreader
Included ground spreader
Included spike foot shoes
No
Yes
No
TECHNICAL SPECIFICATIONS 545GB
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
69cm
27.2in
Mid spreader
Ground spreader
Dolly
Reversible spiked feet
Suction cup/Retractable spike feet
Spike foot shoes
165MV
114MV - 181B
-
SUGGESTED ACCESSORIES
Mid spreader
Ground spreader
Dolly
Reversible spiked feet
Suction cup/Retractable spike feet
Spike foot shoes
537SPRB + 537SPRB-CK Adapter
114MV - 181B
565
31
PRO_TWIN LEG TRIPODS
PRO VIDEO TRIPOD 546B
PRO VIDEO TRIPOD 546GB
Two-stage, extremely rigid, stable tripod. Able to carry loads up to 20kg (44lb).
The 546B has a die cast aluminium crown with a built-in 75mm bowl.
The tripod’s telescopic mid-level spreader helps set leg angles accurately.
Leg locks are secure and reliable, and spiked feet with rubber overshoes
are provided for solid grounding on both uneven terrain and smooth floors.
The tripod can be used with various dollies.
Two-stage, extremely rigid, stable tripod. Able to carry loads up to 20kg (44.lb).
The 546GB has a die cast aluminium crown with a built-in 75mm bowl.
The tripod’s telescopic ground-level spreader helps set leg angles accurately.
Leg locks are secure and reliable, and spiked feet with rubber overshoes
are provided for solid grounding on both uneven terrain and smooth floors.
The tripod can be used with various dollies.
20kg
44lb
69cm
27in
30cm
11.8in
154cm
60.6in
3.5kg
7.7lb
20kg
44lb
TECHNICAL SPECIFICATIONS 546B
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
75mm bowl
No
Lever locks
By mid spreader
From 30° to 66°
32
75mm bowl
No
Lever locks
By ground spreader
From 29° to 63°
32.5cm
12.8in
158.5cm
62.4in
3.5kg
7.7lb
SUGGESTED ACCESSORIES
Included mid spreader
Included ground spreader
Included spike foot shoes
Yes
No
Yes
Included mid spreader
Included ground spreader
Included spike foot shoes
No
Yes
No
TECHNICAL SPECIFICATIONS 546GB
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
69cm
27in
Mid spreader
Ground spreader
Dolly
Reversible spiked feet
Suction cup/Retractable spike feet
Spike foot shoes
165MV
114MV - 181B
-
SUGGESTED ACCESSORIES
Mid spreader
Ground spreader
Dolly
Reversible spiked feet
Suction cup/Retractable spike feet
Spike foot shoes
537SPRB + 537SPRB-CK Adapter
114MV - 181B
565
PRO_TWIN LEG TRIPODS
PRO LIGHTWEIGHT VIDEO TRIPOD 547B
An extremely lightweight single stage video tripod, simple and easy to move. The twin leg can carry loads up to 15kg (33.1lb). A mid-level spreader is included.
The tripod has a die cast aluminium crown with a built in 60mm bowl and a 60mm half ball included. Retractable rubber feet with steel spikes are incorporated into
the legs. It’s a perfect professional solution for lightweight camcorders.
15kg
33.1lb
86cm
33.9in
79.5cm
31.3in
142cm
55.9in
2.3kg
5.1lb
TECHNICAL SPECIFICATIONS 547B
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
60mm bowl + half ball included
No
Lever locks
Not setting
23°
SUGGESTED ACCESSORIES
Included mid spreader
Included ground spreader
Included spike foot shoes
Yes
No
No
Mid spreader
Ground spreader
Dolly
Reversible spiked feet
Suction cup/Retractable spike feet
Spike foot shoes
537SPRB
165
127 - 127VS - 181B
204SCK3
-
33
SINGLE LEG TRIPODS
MPRO tripods unite performance and functionality.
A torsion rigidity superior to that of an equivalent
aluminium twin-strut tripod means that an MPRO tripod
offers better protection against “backlash” effects at the
end of pan movements. Special carbon fiber tubing and
magnesium castings also bring notable weight savings
to the MPRO range, making them easy to carry and
transport. Another feature worth pointing out is that
MPRO tripods also offer incredibly versatile and speedy
height adjustment anywhere, without needing any
accessories.
75mm bowl (535 version only).
75/100mm screw-in adaptor (536
version only) to hold the different
industry standard half-ball heads.
High-performance Carbon fiber tubes.
Lightweight and resistant magnesium
die castings.
New ergonomic leg angle selector for
a quick, easy and precise angle
adjustment.
Quick action ergonomic leg locks.
34
Retractable spiked feet for in and outdoor
use.
MPRO_SINGLE LEG TRIPODS
MPRO CARBON FIBER
2-STAGE VIDEO TRIPOD 535
MPRO CARBON FIBER
3-STAGE VIDEO TRIPOD 536
3-sections, 75mm bowl, carbon fiber tubes and magnesium die castings,
the new 535 video tripod has great stability, high load capability and great
max height with an ergonomic and easy-to-use and compact design.
In addition, a new leg angle selector has been developed for adjusting the
leg angle in a quick, easy and precise way.
4-sections, the new 536 video tripod is incredibly high and stable, has a
great load capability and great max height with an ergonomic, easy-touse and compact design. This lightweight tripod features a new leg angle
selector, developed for adjusting the leg angle in a quick, easy and precise
way. In addition, a screw-in 75/100mm adaptor to hold the different industry
standard half-ball heads.
20kg
44.1lb
73.5cm
28.9in
27cm
10.6in
171cm
67.3in
25kg
55.1lb
2.3kg
5.1lb
TECHNICAL SPECIFICATIONS 535
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
75mm bowl
No
Lever locks
By leg selector
3 steps = 23° - 50° - 70°
75/100mm bowl
No
Lever locks
By leg selector
3 steps = 23° - 50° - 70°
26cm
10.2in
203cm
79.9in
3.3kg
7.3lb
SUGGESTED ACCESSORIES
Included mid spreader
Included ground spreader
Included spike foot shoes
No
No
No
Included mid spreader
Included groung spreader
Included spike foot shoes
No
No
No
TECHNICAL SPECIFICATIONS 536
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
72cm
28.3in
Mid spreader
Ground spreader
Dolly
Reversible spiked feet
Suction cup/Retractable spike feet
Spike foot shoes
114 - 127 - 127VS
-
SUGGESTED ACCESSORIES
Mid spreader
Ground spreader
Dolly
Reversible spiked feet
Suction cup/Retractable spike feet
Spike foot shoes
114 - 127 - 127VS
-
35
SINGLE LEG TRIPODS
MDEVE tripods are, in many ways, the point where
Manfrotto’s video know-how and our long experience
in photography meet: our R&D team realized that
video supports could benefit from some of the main
advantages of photo tripods. They took the lightweight,
torsion-resistant, carbon/aluminium single-tube leg
structure of the photo tripod, with its easily extensible
center column, and built in a new video-ready leveling
system, fitted directly to the top of the center column.
The result is a tripod that’s as quick to set up as a
true photo tripod, but has the fine leveling and torsion
resistance demanded by video. MDeVE is ideally
suited for lightweight camera equipment and for
situations where set-up speed is of the essence.
36
Center column with built-in 50mm
half ball locked using the rotating grip
located at the bottom of the center
column. Tilt range: +15°/-15°.
Single tube leg profile made of roundsection aluminium or carbon fiber.
Four different leg angle settings.
Quick action lever leg lock system (45°
run).
Rubber feet.
MDEVE _SINGLE LEG TRIPODS
carbon fiber
MDEVE MAGFIBER
VIDEO TRIPOD 755CX3
MDEVE ALUMINIUM
VIDEO TRIPOD 755XB
This two-stage tripod features a perfect combination of low weight and high
load capacity materials used for its construction and a built-in 50mm half ball
leveling system locked by a detachable rotating grip, which allows the camera
operator to level the camera without needing to make micro adjustments to
each individual tripod leg.
Designed for the professional videographers, extremely versatile tripod, ideal
for lightweight camcorders, the 755XB is entirely made from aluminium, and
has a removable center column with built-in 50mm leveling ball and bubble
spirit level.
7kg
15.4lb
63.5cm
25in
46.5cm
18.3in
139cm
54.7in
164mm
64.6in
1.9kg
4.2lb
7kg
15.4lb
TECHNICAL SPECIFICATIONS 755CX3
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
50mm leveling flat base with 3/8” screw
+ extendible center column
Yes
Lever locks
By leg selector
4 steps = 23° - 47° - 66° - 89°
Leveling bubble
Locking type
Leg angle setting
Leg angle
50mm leveling flat base with 3/8” screw
+ extendible center column
Yes
Lever locks
By leg selector
4 steps = 23° - 45° - 65° - 88°
41.5cm
16.3in
140.5cm
55.3in
165mm
65in
2.5kg
5.5lb
SUGGESTED ACCESSORIES
Included mid spreader
Included ground spreader
Included spike foot shoes
No
No
No
TECHNICAL SPECIFICATIONS 755XB
Head attachment
63.5cm
25in
Mid spreader
Ground spreader
DollyReversible spiked feet
Suction cup/Retractable spike feet
Spike foot shoes
204SPK3
204SCK3
-
SUGGESTED ACCESSORIES
Included mid spreader
Included ground spreader
Included spike foot shoes
No
No
No
Mid spreader
Ground spreader
DollyReversible spiked feet
Suction cup/Retractable spike feet
Spike foot shoes
204SPK3
204SCK3
-
37
SINGLE LEG TRIPODS
PRO VIDEO HEAVY TRIPOD 528XB
The 528XB is the ideal location tripod, with a massive 50kg (110.2lb) load capacity. Tubes are made of stainless steel for strength under heavy loads, and aluminium
for reducing the weight. The leg spread is fully adjustable, but also incorporates a 30° locked position for faster set up and greater strength. The 528XB includes
a versatile mid-level spreader, which has telescopic “ratchet” braces that click into place in each of the preset positions for faster deployment. Each brace can be
individually set, allowing each tripod leg to be separately positioned.
50kg
110.2lb
99cm
39in
73cm
28.7in
148cm
58.3in
7.4kg
16.3lb
TECHNICAL SPECIFICATIONS 528XB
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
38
100mm bowl + half ball included
No
Knob locks
By mid spreader
From 25° to 41°
SUGGESTED ACCESSORIES
Included mid spreader
Included ground spreader
Included spike foot shoes
Yes
No
No
Mid spreader
Ground spreader
Dolly
Reversible spiked feet
Suction cup/Retractable spike feet
Spike foot shoes
165
114 - 127 - 127VS
-
SINGLE LEG TRIPODS
PRO VIDEO TRIPOD 117B
The 117B features a geared central column that permits a fine adjustment of the camera height. The base is assembled using stainless steel extension legs for
extreme corrosion resistance and extra long working life. The middle spreader is assembled with aluminium telescopic tubes that make the tripod flexible and rigid.
Rubber feet and retractable metal spikes are included.
18kg
39.7lb
94cm
37in
46cm
18.1in
147cm
57.9in
173cm
68.1in
5.7kg
12.6lb
TECHNICAL SPECIFICATIONS 117B
Head attachment
Leveling bubble
Locking type
Leg angle setting
Leg angle
Flat base with 3/8” screw
+ extendible center column
No
Knob locks
By mid spreader
From 10° to 60°
SUGGESTED ACCESSORIES
Included mid spreader
Included ground spreader
Included spike foot shoes
Yes
No
No
Mid spreader
Ground spreader
Dolly
Reversible spiked feet
Suction cup/Retractable spike feet
Spike foot shoes
165
114 - 127 - 127VS
-
39
MONOPODS
Besides the tripod, the monopod is the best way to
hold and use a camcorder where space is limited
and the quantity and weight of the equipment has
to be minimized or set-up speed is needed.
The range includes classic monopods and the
world’s first innovative fluid monopods with a
special fluid cartridge at the bottom for a great
fluid movement never achieved before.
CLASSIC. A complete range of easy-to-use
compact and reliable products, ideal for use in tight
spaces or environments where a tripod may not
be allowed, such as sports stadiums, conferences
and museums.
VIDEO MONOPOD 559B
Four section video monopod featuring, quick action leg locks, rubber grip,
wrist strap, suction cup foot and touch and go 323 camera plate adapter.
Ideal to support small and very compact camcorders.
4.5kg
9.9lb
55cm
21.7in
161cm
63.4in
1.2kg
2.7lb
200PL-14
VIDEO MONOPOD 558B
Light and compact three-section professional monopod featuring sure
rubber grip, suction cup foot, quick-action leg locks, wrist strap and 577
sliding camera plate adapter to adjust the camera’s center of balance.
8kg
17.6lb
65cm
25.6in
159cm
62.6in
1.1kg
2.4lb
501PL
VIDEO MONOPOD 557B
Solid and stable three-section professional monopod featuring sure rubber
grip, suction cup foot, quick-action leg locks, wrist strap and 357 sliding
camera plate adapter to adjust the camera’s center of balance.
12kg
26.5lb
67cm
26.4in
164cm
64.6in
1.8kg
4lb
357PLV
559B
REVERSIBLE SPIKED FOOT 204SP1
REVERSIBLE SPIKED FOOT 449SP2
Reversible rubber/metal spiked foot supplied with a dedicated fixing tool.
The spike is made of a special hard anodized aluminium alloy extremely
resistant to corrosion.
204SP1 for monopod: 558B
449SP2 for monopod: 559B
40
558B
RUBBER/SPIKED FOOT 250SP1
Rubber foot for monopods with retractable metal spike.
For monopod: 557B
557B
MONOPODS
FLUID. Manfrotto fluid monopods family is a world’s
first product designed to help videographers achieve
superior image quality. An innovative fluid cartridge has
been incorporated into the base of the monopod for
incredibly smooth, jump-free panning actions. The three
pivoting, retractable feet ensure a firm footing.
The key feature of this monopods family
is the fluid cartridge incorporated into
the base that gives you an incredibly
smooth panning action.
The three retractable feet ensure a firm
footing and a great compactness while
folded.
560B
561BHDV
562B
FLUID VIDEO MONOPOD 560B
This compact and lightweight 4-section aluminium fluid monopod includes a fluid cartridge, retractable feet and a compact quick release tilt top with angle lock knob.
2kg
4.4lb
66cm
26in
166.5cm
65.5in
0.7kg
1.5lb
200PL-14
FLUID VIDEO MONOPOD 561BHDV
The 561BHDV is a compact but incredibly high 4-section aluminium fluid monopod. It is equipped with a fluid head (701HDV special version) including a new long
sliding plate. The ergonomic pan bar allows smooth panning and tilting movements.
4kg
8.8lb
76.5cm
30.1in
200cm
78.7in
1.9kg
4.2lb
501PL
FLUID VIDEO MONOPOD 562B
The 562B is a compact and high 4-section aluminium fluid monopod equipped with a 357PLV sliding camera plate adapter to adjust the camera’s center of balance.
This fluid monopod is ideal for camcorders up to 8kg (17.6lb).
8kg
17.6lb
69cm
27.1in
193cm
76in
1.4kg
3.2lb
357PLV
41
ALTERNATIVE SUPPORTS
Manfrotto hydrostatic arms, clamps and other
alternative supports and accessories are
fundamental video support “tools” needed to create
the perfect supporting solution in every situation.
MEDIUM HYDROSTATIC ARM 823
This is the first arm that features 5/8” male and 3/8”+1/4” female thread pins
to support larger and heavier items. One of the two pins is hex shaped to
marry perfectly with our Super Clamp. With a total length of 23.5cm (9.3in),
the 823 is ideal to position LCD monitors, lighting fixtures or cameras virtually
anywhere.
4kg
8.8lb
SMALL HYDROSTATIC ARM 819-1
MINI HYDROSTATIC ARM 814-1
This arm spans 18cm (7.1in) and can support up to 2.2kg (4.8lb). The 819-1 is
the ideal companion for attaching a video monitor to a camera or using as a flag
support. The pivoting pins are 1⁄4” and 3/8” male threaded with one adjustable
platform ring offering a larger footprint for the equipment being supported by
the arm.
A small and incredibly powerful arm (max load is 3.5kg - 7.7lb) that spans 13cm
(0.4in). The pivoting pins are 1⁄4” and 3/8” male threaded with one adjustable
platform ring offering a larger footprint for the equipment being supported by
the arm.
2.2kg
4.9lb
3.5kg
7.7lb
0.2kg
0.5lb
0.2kg
0.5lb
VARIABLE FRICTION ARM WITH
QUICK RELEASE PLATE 244RC
MAGIC ARM WITH
QUICK RELEASE PLATE 143RC
Articulated arm with large locking knob. Variable friction and locking of arm
obtained by adjusting the knob. Supplied with quick release camera plate
with secondary safety lock based on the 200PL-14 camera plate mechanism.
Ideal for mounting a video camera exactly at the angle you need it.
Fits any 5/8” female socket, works especially well with Super Clamp 035C.
Your extra arm in the studio. One lever locks three pivot points. Supplied
with a quick release camera plate with secondary safety lock based on the
200PL-14 system. Ideal for mounting a camcorder exactly at the angle you
need it.
Fits any 5/8” female sockets, works especially well with Super Clamp 035C.
4kg
8.8lb
42
0.5kg
1.2lb
1.1kg
2.4lb
200PL-14
4kg
8.8lb
1.1kg
2.4lb
200PL-14
NANO CLAMP 386BC
This universal clamp can be securely mounted on any tube from 13 to 45mm
(0.5 to 1.8in). Attachment is 5/8” hexagonal socket, plus 1/4” female thread.
The new Manfrotto small size clamp. Its reduced size is the most important
plus: the Nano Clamp is 4kg (8.8lb) of payload in 110g (2.4lb) of weight and
the right size for any pocket.
The Nano Clamp is also a full pack of new technological advances:
- a new patented unexposed thread system
- a new high friction tape which improves the grip
- high performance aluminium
- pull and lock aluminium handle
- unique surface design that was studied on the smallest surface to be able
to grip round or flat tube/pole surface.
The clamp comes with a 1/4”-3/8” female thread and 1/4”-3/8” adapter.
15kg
33.1lb
0.5kg
1.1lb
4kg
8.8lb
0.1kg
0.2lb
MONOPOD TILT TOP 234
MONOPOD QUICK RELEASE
TILT TOP 234RC
Simple tilt head to allow a camcorder on a Monopod to be turned 90° to
provide either vertical or horizontal format.
Same as a 234 but with a quick release camera plate system and
secondary safety lock.
2.5kg
5.5lb
2.5kg
5.5lb
6cm
2.4in
0.3kg
0.6lb
ALTERNATIVE SUPPORTS
SUPER CLAMP 035C
6cm
2.4in
0.3kg
0.6lb
PUMP CUP WITH FLAT BASE 241FB
PUMP CUP 241
Suction cup for lightweight video cameras. The 60mm (2.4in) diameter disc
with a 3/8” W male thread is built in the pump cup and enables you to mount
most of Manfrotto’s heads.
Suction cup for small equipment.
Diameter: 150mm (5.9in).
0.6kg
1.4lb
1.2kg
2.6lb
200PL-14
CAMCORDER MOUNTING STUD 037
Reversible stud with 3/8” and 1/4” designed for mounting camcorders on
Super Clamp 035C.
43
REMOTE CONTROLS
Manfrotto remote control units put the
most important commands of marketleading video cameras and lenses at your
finger-tips. Our remote control collection
includes a wide variety of Pan-bar versions
and Clamp-on versions. Pan-bar versions
(which integrate directly with the Manfrotto
fluid video head) offer the advantage of
allowing you to operate both camera
movement and recording/zoom fuctions
with the same hand without having to
touch the camera itself; helping eliminate
shake and unwanted vibration from your
shooting. Clamp-on versions are incredibly
compact and can be attached to anything
from tubes, pipes, tabletops, Fig Rigs,
handle bars, and more.
CAMERA. The Manfrotto camera remote
control collection includes two families of
products: the telescopic Pan Bar remote
control and the Clamp remote control. For
both families there is the availability of LANC
protocol or Panasonic technology. The
product line is completed with accessories
such as rain covers, adapter cables and
extensions.
COMPATIBILITY CHART
REMOTE CONTROLS
CAMERA
521i
521PROi
523PROi
521LX
521P
522P
521PFi
SONY
PMW EX1R
X
PMW EX1
X
PMW EX3
X
HXR-NX5
X
HVR Z5
X
X
X
X
HVR-S270
X
X
X
X
HVR-HD1000
X
X
X
X
HVR-V1
X
X
X
X
HVR-A1
X
X
X
X
HVR-Z1
X
X
X
X
HVR-Z7
X
X
X
X
HDR-FX1
X
X
X
X
HDR-FX7
X
X
X
X
DSR-PDX10
X
X
X
X
DSR-PD170
X
X
X
X
DSR-PD150
X
X
X
X
DSR-250
X
X
X
X
DSR-200
X
X
X
X
DCR-VX2100
X
X
X
X
DCR-VX2000
X
X
X
X
DCR-TRV950
X
X
X
X
DCR-PC330
X
X
X
X
XL H1S
X
X
X
X
XL H1A
X
X
X
X
XH-A1
X
X
X
X
XH-A1S
X
X
X
X
XH-G1
X
X
X
X
XH-G1S
X
X
X
X
XL-H1
X
X
X
X
XM-1
X
X
X
X
GL-1
X
X
X
X
XM-2
X
X
X
X
GL-2
X
X
X
X
XL1
X
X (no PAF)
X (no PAF)
X (no PAF)
XL1s
X
X (no PAF)
X (no PAF)
X (no PAF)
XL2
X
X (no PAF)
X (no PAF)
X (no PAF)
CANON
PANASONIC
no PAF - no Push Auto Focus function (puts camera
into auto focus mode while the button is pressed).
For checking the compatibilty with the latest
camcorders (not present in the chart) please visit
www.manfrotto.com site.
44
521EX
AG-HVX201
X
X
AG-HPX175
X
X
AG-HPX170
X
X
AG-HPX171
X
X
AG-HMC151
X
X
AG-HVX200
X
AG-DVX100BE
X
AG-DVX100B
X
X
AG-DVX100E
X
X
AG-DVX100A
X
X
AG-DVC80
X
X
AG-DVC30
X
X
X
X
X
COMMANDS
POWER ON/OFF
CUSTOMIZABLE KEY (1,2,3,4)
CUSTOMIZABLE JOYSTICK
RECORD/STOP PUSH BUTTON
ZOOM SPEED WHEEL
AUTO/MAN FOCUS SWITCH
MENU SELECTION KNOB
INTERACTIVE DISPLAY
CAMERA REMOTE CONTROLS
FOR SONY
FOR CANON
CLAMP Hi-END REMOTE CONTROL 521LX
As its full name suggests, the 521LX uses Sony and Canon’s widely implemented LANC protocol to allow interaction and command over LANC-enabled
camcorders. What makes this unit so innovative is not just that it has been developed to take full advantage of the latest and greatest LANC-controllable functions,
but also that all of those functions and their mapping to the controls of the 521LX are customizable by the user: something truly new and a real benefit to camcorder
users, allowing them to get the best performance from their equipment with the most intuitively personalized commands. Furthermore, the 521LX can be updated
in the event of new camcorder features becoming LANC-enabled - the 521LX has a USB port for connection to your PC; new firmware releases and upgrades will
be published on manfrotto.com for download and straightforward update via USB. In this way, the 521LX can always stays abreast of the latest innovations in LANC
control, helping videomakers get the most from their camcorders and stay ahead of the competition!
Supplied with 522SCA connector coiled cord cable measuring 140cm (55in) when extended. Rain cover available as accessory (523RC).
Interactive backlight display with quick
access to menu selection and stand-by
push button to save the cameras battery
capacity.
New clamp system improves speed and fixing capability. Usable with all the pan bars
(diameters 13 mm /22 mm) without need of extra adapters.
USB port allows to update the software with the latest
versions so you will always be up to date with the features
of most recent cameras.
Focus Control: allows to choose the focus control modality,
either manual or automatic. The menu selection knob
combined with display allows you to go through setting
menu functions for complete control on the 521LX.
Multifunction customizable Joystick: soft
ultra-precise and ergonomic it allows to
change zoom, focus and iris (depends on
the camcorder) controls without averting
your attention from frame.
Customizable Keypad: allows to setup the
keys according to all the functions available
in the camera achieving the highest level
of interaction with camcorder.
Special zoom potentiometer allows a direct control of
the maximum speed zoom from 1 to 16, depends on the
camcorder ensuring the best control during the shooting.
45
CAMERA REMOTE CONTROLS
FOR SONY
FOR CANON
COMMANDS
POWER ON/OFF
ZOOM SET SPEED 1
F > fixed speed zoom
P > progressive speed zoom
ZOOM PRESET SPEED 2
F > fixed speed zoom
P > progressive speed zoom
ZOOM PRESET SPEED 3
F > fixed speed zoom
P > progressive speed zoom
RECORD/STOP
FOCUS/ZOOM WHEEL SELECTION
ZOOM/FOCUS WHEEL
AUTO/MANUAL FOCUS
AUTOFOCUS
REC REVIEW
PRO REMOTE CONTROL 523PROi
The 523PROi remote control works with both Sony and Canon LANC-enabled video cameras. The remote control features a record/stop button, a
power on/stand by button, three different zoom speed (up to 16 for Canon HD cameras) control buttons (slow, medium and fast) a push auto focus and Rec
review buttons. The zoom wheel can be used to control one of the three preset, maximum zoom speeds or a customizable maximum speed which
you can set to exactly the level you want. For all zoom speeds you can choose between progressive zoom speed (the further you rotate the zoom wheel,
the faster the zoom) or fixed zoom speed (irrespective of the rotation applied to the wheel, zoom speed remains constant) by pressing the button once
(progressive) or twice (fixed). The LED shows you which speed you have selected. To set a “custom” zoom speed, simply use the wheel to set your speed
and hold the zoom speed button until the LED flashes. The setting remains in the unit’s memory until you decide to change it. Whether you choose a limited
progressive zoom range or a single fixed speed, the features of the 523PROi means you can easily repeat zooms precisely in subsequent takes of the same
shot. The 523PROi also allows you to set left and right handed operation by changing zoom wheel direction. The push auto focus button makes it very easy
to achieve in-focus images when working in manual focus mode. You can also set the main knob to focus in and focus out controlling up to 8 speeds for
Canon HD cameras. 523PRO does not come with any parts to fit to the head, but instead utilizes the pan bar clamp that comes with all Manfrotto heads.
1
2
Zoom wheel direction and focus direction
can be inverted (left - right or right - left).
46
1 Telescopic pan bar allows you to choose the most comfortable working position.
Max length 61.5cm (24.2in) - Min length 37cm (14.6in) - Extension 24.5cm (9.6in).
2 Incorporation of the remote controller with the video head pan bar ensures sturdy
attachment and eliminates mechanical problems.
Waterproof cover supplied with a crystal
clear vinyl panel allows viewing of the
remote control button during the shooting
session. The cover slips quickly over the
remote pan bar to protect it from rain or
sudden showers.
Only system with jack connector rather
than built-in cable means the camera cable
can be easily substituted.
COMMANDS
POWER ON/OFF
ZOOM SPEED BUTTON
RECORD/STOP
FOCUS/ZOOM WHEEL SELECTION
ZOOM/FOCUS WHEEL
AUTOFOCUS
1
2
3
4
5
CAMERA REMOTE CONTROLS
FOR SONY
FOR CANON
1 CLAMP RANGE:
Round tube/pipe/bar 12 to 35mm (0.5 to 1.4in) diameter.
2 CLAMP RANGE:
Square tube of flat surfaces 5 - 30mm (0.2 - 1.2in) height.
3 CLAMP RANGE:
Rectangular tube of flat surfaces 5 - 30mm (0.2 - 1.2in)
height.
4 WHEEL ZOOM/FOCUS: Professional zoom/focus wheel
for finer adjustments and smoother progressions.
INVERTIBLE ZOOM DIRECTION: Zoom in/out direction
can be inverted (left to right, or right to left).
5 JACK CONNECTOR: 2.5mm jack connector instead of
built-in cable means you can easily change the length
of the camera cable for different set-up requirements.
CLAMP PRO REMOTE CONTROL 521PROi
Built onto a small clamp that suits a wide range of applications, the 521PROi is the top of the range of this compact remote control. It uses the LANC protocol
adopted by Sony and Canon Mini DV cameras. The new firmware allows control of up to 16 zoom speeds and 8 focus speeds in Canon HD cameras. Supplied with
522SCA connector coiled cord cable measuring 140cm (55in) when extended. Rain cover available as accessory (523RC).
COMMANDS
POWER ON/OFF
ZOOM SPEED BUTTON
RECORD/STOP
WHEEL ZOOM
FOCUS IN/OUT
CLAMP REMOTE CONTROL 521i
Built onto a small clamp that suits a wide range of applications, the 521i controls the zoom up to 16 speeds in Canon HD cameras and focus in/out at one speed.
It uses the LANC protocol adopted by Sony and Canon Mini DV cameras. Supplied with 522SCA connector coiled cord cable measuring 140cm (55in) when extended.
Rain cover available as accessory (523RC).
47
CAMERA REMOTE CONTROLS
FOR SONY
ADAPTOR CABLE FOR “AV-R” SONY CONNECTOR 522AV
Made for video cameras with the AV-R plug, the 522AV converts the possibility to connect to these type of cameras all the Manfrotto remote controls. This adaptor offers
the standard LANC plug on one side and the new AV-R connector on the other side. The length of the coiled cord cable is 20cm (7.8in). This accessory is included also
inside all the 585LNC box.
REMOTE PAN BAR ADAPTER FOR 523PROi
It seemed too much of a shame to keep this to ourselves, so we’ve also made
available a pan bar adapter system that connects the Manfrotto remote control
to video heads from other manufacturers:
SUPPLEMENTARY ADAPTER CODE
522PB 12
522PB 13
522PB 14
522PB 16
522PB 18
522PB 22
522PB 25
522PB 30
BAR DIAMETER
12mm (0.47in)
13mm (0.51in)
14mm (0.55in)
16mm (0.62in)
18mm (0.70in)
22mm (0.86in)
25mm (0.90in)
30mm (1.11in)
OPTIONAL CABLES FOR SONY AND CANON REMOTES
The following cable lengths are available for replacement or for extension.
RAIN COVER
FOR REMOTE CONTROL 523RC
Waterproof cover for Manfrotto remote control supplied with a crystal clear
vinyl panel allows the viewing of the remote control button during the shooting
session. The cover slips quickly over the remote pan bar to protect it from
rain or sudden showers.
REMOTE CONTROL CABLE
STANDARD 522SCA
2.5mm male/male jack coiled cord cable measuring 140cm (55in) when
extended, supplied as standard with all the units.
REMOTE CONTROL CABLE
SUPER EXTENSION 522EXTC30
2.5mm male/female jack and plug, straight cable, measuring 30 meters
(98ft) in length can be fitted to all units.
48
COMMANDS
MINIMUM ZOOM SPEED
preset, fixed speed only
MEDIUM ZOOM SPEED
preset, fixed or progressive speed
MAXIMUM ZOOM SPEED
preset, fixed speed only
DIGITAL MODE
Switch to digital mode for access to advanced
zoom functions
RECORD/STOP
ANALOG MODE
Switch back to Analog mode to save battery life
CUSTOM
Customizable zoom speed, fixed or progressive
speed
WHEEL ZOOM
CAMERA REMOTE CONTROLS
FOR PANASONIC
REMOTE CONTROL 522P
The 522P is a dual circuit, progressive zoom remote control unit for Panasonic cameras. The dual circuit allows you to choose between a zero power consumption
“analog” mode for basic functions (record/stop and progressive min-max zoom via a professional zoom wheel) and a 3 AA (1.5 volt) battery-powered, advanced,
customizable “digital” mode. The digital mode gives you the record/stop function, and the zoom wheel can be used to control one of three preset maximum zoom
speeds or a customizable maximum speed which you can set to exactly the level you want. The “custom” zoom speed setting remains in the unit’s memory even
when batteries run down, until you decide to change it. In addition, for all options except the slowest preset speed, you can choose between progressive zoom
speed (the further you rotate the zoom wheel, the faster the zoom) and fixed zoom speed (regardless of the rotation applied to the wheel, zoom speed remains
constant) by pressing the button once (progressive) or twice (fixed). An LED shows you which speed you have selected. The 522P also allows you to set left- or
right handed operation by changing zoom wheel direction. 522P does not come with any parts to fit to the head, but instead utilizes the pan bar clamp that comes
with all Manfrotto heads.
1
2
1 522P is mounted on a telescopic video head pan bar for sturdy attachment, comfortable positioning and
fingertip control.
Max length 44cm (17.3) - Min length 37cm (14.6in) - Extension 7cm (2.8in).
2 Incorporation of the remote controller with the video head pan bar ensures sturdy attachment and eliminates
mechanical problems.
Professional zoom wheel with
excellent build quality gives
finer control over progressive
zoom speeds. Zoom wheel
direction can be inverted (left –
right or right – left).
Battery compartment located
in handle of pan bar. Batteries
not included.
Only system with jack connector instead of built-in cable, so
it can easily be substituted,
lengthened or shortened.
49
CAMERA REMOTE CONTROLS
FOR PANASONIC
SONIC
COMMANDS
RECORD/STOP
WHEEL ZOOM
1
2
3
4
5
1 CLAMP RANGE:
Round tube/pipe/bar 12 to 35mm (0.5 to 1.4in) diameter.
2 CLAMP RANGE:
Square tube of flat surfaces 5 - 30mm (0.2 - 1.2in) height.
3 CLAMP RANGE:
Rectangular tube of flat surfaces 5 - 30mm (0.2 - 1.2in)
height.
4 WHEEL ZOOM:
Professional “wheel” zoom for finer adjustments and
smoother progressions.
5 JACK CONNECTOR:
2.5mm jack connector instead of built-in cable means
you can easily change the length of the camera cable for
different set-up requirements.
BASIC REMOTE CONTROL FOR PANASONIC 521P
Built onto a small clamp that suits a wide range of applications, the 521P is designed to work with Panasonic cameras and controls Record/Stop and zoom in/out
functions of the camera. Supplied with 522SCA connector cable measuring 140cm (55in) when extended.
REMOTE PAN BAR ADAPTER FOR 522P
It seemed too much of a shame to keep this to ourselves, so we’ve also made
available a pan bar adapter system that connects the Manfrotto remote control
to video heads from other manufacturers:
SUPPLEMENTARY ADAPTER CODE
522PB 12P
522PB 13P
522PB 14P
522PB 16P
522PB 18P
522PB 22P
BAR DIAMETER
12mm (0.47in)
13mm (0.51in)
14mm (0.55in)
16mm (0.62in)
18mm (0.70in)
22mm (0.86in)
OPTIONAL CABLES FOR PANASONIC REMOTES
The following cable lengths are available for replacement or for extension.
RAIN COVER
FOR REMOTE CONTROL 523RC
Waterproof cover for Manfrotto remote control supplied with a crystal clear
vinyl panel viewing of the remote control button during the shooting session.
The cover slips quickly over the remote pan bar to protect it from rain or
sudden showers.
REMOTE CONTROL CABLE
STANDARD 522SCA
2.5mm male/male jack coiled cord cable measuring 140cm (55in) when
extended, supplied as standard with all the units.
REMOTE CONTROL CABLE
SUPER EXTENSION 522EXTC30
2.5mm male/female jack and plug, straight cable, measuring 30 meters
(98ft) in length can be fitted to all units.
50
COMMANDS
FOCUS ADJUSTMENT
IRIS ADJUSTMENT
FOCUS AUTO/MANUAL SWITCH
IRIS AUTO/MANUAL SWITCH
FOCUS DIRECTION SWITCH
IRIS DIRECTION SWITCH
FOCUS FAR LIMIT KNOB
FOCUS CLOSE LIMIT KNOB
FOCUS CUSTOM./STD. SWITCH
CAMERA REMOTE CONTROLS
FOR PANASONIC
FOCUS/IRIS CONTROL FOR PANASONIC 521PFi
The brand new 521PFi Focus/Iris remote controller is specifically designed to control operation of Panasonic cameras. It can be used in combination with 521P
and 522P zoom remote for Panasonic cameras. The 521PFi includes a complete range of professional features: focus and iris manual adjustment, focus min and
max adjustment, auto\manual switch for iris and focus, specific label and ring giving the possibility to write, cancel and re-write position references for the iris and
focus knobs.
1
2
3
1 CLAMP RANGE: Round tube/pipe/bar 12 to 35mm (0.5 to 1.4in) diameter.
2 CLAMP RANGE: Square tube of flat surfaces 5 - 30mm (0.2 - 1.2in) height.
3 CLAMP RANGE: Rectangular tube of flat surfaces 5 - 30mm (0.2 - 1.2in) height.
Focus Auto/Manual
Switch Iris Auto/Manual
Switch Focus custom./std switch.
Focus direction switch
Jack connector
Iris direction switch.
Focus far limit knob
Focus close limit knob.
Focus wheel
Manual Iris wheel position
Memory sign position.
51
REMOTE CONTROLS
LENS. Manfrotto is proud to be the first
company to develop a single remote
control unit that controls both Fujinon
and Canon interchangeable lenses used
by professional camcorders. The intelligent
embedded system that allows the
controller to automatically recognized and
communicate with the lens you connect it
to is what sets Manfrotto’s Lens Controls
head and shoulders above the rest.
COMMANDS
PROFESSIONAL THUMB ZOOM WHEEL
that comfortably and naturally fits the hand
to produce smooth zooms
RAISED RECORD START/STOP BUTTON
to easily locate as you’re looking
through the view finder
RET-RETURN VIDEO FUNCTION
that allows you to play back the last
5 seconds of recorded material with the
camera automatically cueing up the tape to
the last frame so as not to break timecode
STEPLESS ZOOM CONTROL SPEED DIAL
allowing you to pre-select a zoom speed
and/or changing the zoom speed mid-shot
ILLUMINATED POWER INDICATOR
No batteries are required to operate
the remote as all power is pulled from
the camera.
INTELLIGENT ZOOM REMOTE CONTROL FOR ENG LENSES 524CFi
The 524CFi is a pan bar-mounted remote control unit for Canon and Fujinon video camera lenses with intelligent circuitry and programming to differentiate between
the two. The 524CFi offers an easy to operate progressive zoom, record/stop and RET (return - plays back the last 3 seconds of footage then stops at the last
recorded frame ready to record again). The red dial allows you to quickly and easily limit the maximum zoom speed to avoid a too quick transition while the zoom
direction switch lets you change from left-right to right-left zooming.
1 Telescopic pan bar allows you to choose the most comfortable working position.
Max length 61.5cm (24.2in) - Min length 37cm (14.6in) - Extension 24.5cm (9.6in).
2 Incorporation of the remote controller with the video head pan bar ensures
sturdy attachment and eliminates mechanical problems.
Professional-type “wheel” zoom for finer
adjustment and smoother progressions.
Zoom wheel direction can be inverted
(left – right or right – left).
Waterproof cover supplied with a crystal clear
vinyl panel to allow viewing of the remote control
button during the shooting session. The cover
slips quickly over the remote pan bar to protect
it from rain or sudden showers.
ADAPTER CABLE 524ADAPT
This optional 10cm (3.9in) adapter cable allows you to convert the 8-pin 524CFi and 521CFi Remote Control cable to a 12-pin configuration found on some Fujinon ENG
lenses.
52
BASIC INTELLIGENT ZOOM REMOTE CONTROL FOR ENG LENS 521CFi
COMMANDS
POWER ON/OFF
RET
LED INDICATOR
ZOOM KNOB
ZOOM SPEED LIMIT
ZOOM DIRECTION SWITCH
LENS REMOTE CONTROLS
90cm cable.
The 521CFi puts all the functions of the 524CFi in a smaller clamp control suitable for use with the 595B Fig Rig, with jib arms and in a wide variety of other
shooting setups. This allows the video operator to take full advantage of the latest compact HD camcorders with interchangeable lenses. The 521CFi offers an
easy to operate progressive zoom, record/stop and RET (return - plays back last 3 seconds of footage then stops at the last recorded frame ready to record again).
A small side-mounted dial allows you to quickly and easily limit the maximum zoom speed to avoid a too quick transition while the zoom direction switch (also on
the side of the unit) lets you change from left-right to right-left zooming. A rain cover is available as accessory (523RC).
Professional zoom wheel with excellent build quality
gives finer control over progressive zoom speeds.
An innovative fast zoom and the zoom speed limit
potentiometer allow the best control on zoom feature.
COMMANDS
RET
FAST ZOOM W
FAST ZOOM T
REC/STOP
WHEEL ZOOM
ZOOM SPEED LIMIT
REMOTE CONTROL FOR SONY 521EX
The dedicated remote control for SONY PMW EX cameras. The 521EX features the usual range of professional features plus an innovative fast zoom function, which
can be used without modifying the zoom speed control.
EXTENSION CABLE SONY “EX” SERIES 522EX10
Extension cable 10 meters (32 ft) long.
53
FIG RIG
The Fig Rig is more than just a steady support. It is a
frame on which to build your system. Your camera
has only one hot-shoe for accessories, limiting you
to one light or one monitor. With the Fig Rig, you
can mount any number of accessories that are
necessary for today’s cameras. Customize the Fig
Rig to your liking. Manfrotto provides all the tools
to allow you to create your own supporting system.
FIG RIG 595B
Each side of the camera bar is threaded
with one 1/4”, 3/8” and 5/8” hole for
additional accessory mounting.
A non-slip rubber pad provides stability
when using the Fig Rig on a flat surface
such as a table, floor or railing.
54
After years of using the Fig Rig on his award-winning films, Mike Figgis brought
his idea to Manfrotto. An idea that is non-traditional in design, but purely simple
and effective. The only modular system in the world to smoothly support the
DV camera and act as a frame to mount all the accessories – including zoom
controllers, mics, mixers, lights, monitors, arms...
A circular frame with a crossbar to mount most mini DV cameras, the Fig
Rig becomes part of the body to produce smooth, steady travelling shots.
It is this very fact which is the secret to the Fig Rig. As the operator walks,
his/her muscles and tendons absorb all the shocks, transferring only fluid
movements to the camera. As there are no straps or harnesses attached
to the Fig Rig, quick and wide movements can be made within the same
shot, from ground-level to overhead, in one smooth movement. The camera,
accessories and operator become one, allowing you to film scenes quickly
and unobtrusively. With the Fig Rig your creativity is virtually limitless.
Supplied with a 501PL sliding QR plate
allowing you to position and balance
your camera. The plate system can be
switched out with a variety of Manfrotto
plate assemblies to best match your
camera.
REMOTE CONTROLS 521PROi,
521i, 521PFi, 521P, 521CFi, 521EX
REMOTE CONTROL
SPLITTER BOX 521SB
Fig Rig is compatible with following remote controls: 521PROi, 521i, 521PFi,
521P, 521CFi, 521EX.
For more info see pages 47-53.
The 521SB allows you to plug in two 521 series remotes to control the camera
with both hands. For example, plug two 521PRO remotes into the 521SB and
use the zoom wheel of one 521PRO to control zoom and the other to control
focus. The 521SB is threaded with a 3/8” and 1/4” socket and supplied with
a thumbscrew to mount directly to the Fig Rig crossbar.
FIG RIG
FIG RIG CLAMP 595CLA
Clamp specifically designed for the Fig Rig. Supplied with 1/4” and 3/8” screws, and female 1/4”-3/8” adapter.
ON-CAMERA LIGHTS AND MONITORS: position
your light or monitor anywhere around your
camera, freeing you up to take it off your
hot-shoe.
MICROPHONES: mount your shotgun mic
anywhere around the camera.
LOW-ANGLE STABILITY: quickly mount the
Fig Rig to any 5/8” stud for either temporary
storage of stable low-angle shots.
MICROPHONE CLIP MICC1
MICROPHONE SPRING CLIP MICC2
Standard type microphone clip.
Universal type microphone clip.
Grabs microphones from diameter 20 to 35mm (0.8 to 1.4in).
UNIVERSAL SHOCK MOUNT
MICROPHONE HOLDER MICC4
RECTANGULAR VIDEO
QUICK RELEASE ADAPTER 323
Rubber dampening system to absorb vibrations. Swiveling yoke has 3/8”
threaded hole.
Quick ‘touch-and-go’ plate system for smaller cameras. Supplied with 1/4”
camera screw.
VIDEO CAMERA PLATE 501PL
VIDEO CAMERA PLATE 504PLONG
This standard sliding plate is supplied with 1/4” and 3/8” camera fixing
screws.
This long version of the standard plate allows perfect balance for camcorders
with unusual weight distribution caused by long telescopic lenses or heavy
batteries. Supplied with 2x1/4” and 2x3/8” camera fixing screws.
Dimensions: 140x10.7x50mm (5.5x0.4x2in).
55
ACCESSORIES
VIDEO CAMERA PLATE 357PLV
HEAD ACCESSORIES: the Manfrotto head accessory
system includes a wide range of products that
satisfy all the customer needs in terms of camera
attachment and customized pan bar. All the
Manfrotto plates are made of aluminium with a
travelling distance up to 140mm (5.5in). Also the
Manfrotto pan bars are assembled with aluminium
tubes with a maximum extension of 58cm (22.8in).
This standard sliding plate is supplied with 2x1/4” and 2x3/8” camera fixing
screws. Dimensions: 140x10.7x56mm (5.5x0.4x2.2in).
VIDEO CAMERA PLATE 501PL
This standard sliding plate is supplied with 1/4” and 3/8” camera fixing
screws. Dimensions: 90x11x50mm (3.5x0.4x2in).
56
VIDEO CAMERA PLATE 357PLONG
VIDEO CAMERA PLATE 200PL-14
This long version of the standard plate allows perfect balance for
camcorders with unusual weight distribution caused by long telescopic
lenses or heavy batteries. Supplied with 2x1/4” and 2x3/8” camera screws.
Dimensions: 210x11.1x56mm (8.3x0.4x2.2in).
This standard plate is supplied with 1/4” camera fixing screw.
Dimensions: 53x11.2x42.3mm (2.1x0.4x1.7in).
RECTANGULAR VIDEO
QUICK RELEASE ADAPTER 323
VIDEO CAMERA PLATE 504PLONG
This quick release adapter gives you the freedom to remove the camera
from the head without detaching it from the plate and put it on any other
support. Supplied with 1/4” camera screw. Dimensions: 73.7x26.5x67.5mm
(2.9x1x2.7in).
This long version of the standard plate allows perfect balance for
camcorders with unusual weight distribution caused by long telescopic
lenses or heavy batteries. Supplied with 2x1/4” and 2x3/8” camera fixing
screws. Dimensions: 140x10.7x50mm (5.5x0.4x2in).
ADAPTER 357
VIDEO QUICK RELEASE ADAPTER 577
This quick release adapter gives you the freedom to remove the camera
from the head and put it on any other support. Supplied with 2x1/4” and
2x3/8” camera screw. Dimensions: 140x22x99mm (5.5x0.9x3.9in) - 80mm
(3.1in) travel .
This quick release adapter gives you the freedom to remove the camera from
the head without detaching it from the plate and put it on any other support.
Supplied with 1/4” and 3/8” camera screws.
Dimensions: 90x23.5x100mm (3.5x0.9x3.9in) - 20mm (0.8in) travel.
PAN BAR 504HLV
PAN BAR 519LV
Pan bar for the 504HDV video head.
Max length 58cm (22.8in) - Min length 33cm (13in) - Extension 25cm (9.8in).
Telescopic pan bar for the 526 and 519 video heads.
Max length 58cm (22.8in) - Min length 33cm (13in) - Extension 25cm (9.8in).
PAN BAR 501HLV
PAN BAR 701HLV
Fixed pan bar for the 501HDV video head.
Length 37cm (14.6in).
Pan bar for the 701HDV video head.
Length 32.5cm (12.8in).
ACCESSORIES
TRIPOD ACCESSORIES: in order to customize your tripod
for every different environment, the Manfrotto tripod
accessories range includes a complete set of different
dollies, spreaders and reversible spiked feet.
FOLDING AUTODOLLY 181B
Single lever braking system controls all three 80mm wheels. It folds legs
for transporting and storage. Includes 3/8” attachment which allows you to
attach a head for low angle shooting. See chart (page 58) for tripod compatibility.
25kg
55.1lb
4.5kg
9.9lb
127cm
50in
VIDEO DOLLY 114
PORTABLE DOLLY 114MV
Heavy duty, super sturdy, designed for use with large video tripods;
individually braked wheels with cable guards. Folds for transporting. Includes
3/8” attachment which allows you to attach a head for low angle shooting.
See chart (page 58) for tripod compatibility.
Same as 114 dolly with ability to accept spiked tip tripods. Includes 3/8”
attachment which allows you to attach a head for low angle shooting.
See chart (page 58) for tripod compatibility.
60kg
13.3lb
8kg
17.6lb
112cm
44.1in
60kg
13.3lb
6.2kg
13.7lb
112cm
44.1in
VIDEO DOLLY 127
BASIC DOLLY 127VS
Designed for light and medium weight tripods. The 76mm wheels have a
sure-lock feature that raises the wheels free off the ground so that the dolly
then rests on extended feet. Includes 3/8” attachment which allows you to
attach a head for low angle shooting.
See chart (page 58) for tripod compatibility.
Everything that the 127 has with the ability for a variable spread for the legs.
Suitable for standard and spiked feet. Includes 3/8” attachment which allows
you to attach a head for low angle shooting.
See chart (page 58) for tripod compatibility.
10kg
22lb
10kg
22lb
2.4kg
5.3lb
110cm
43.3in
3.4kg
7.5lb
78-114cm
30.7-44.9in
57
ACCESSORIES
MID LEVEL SPREADER 537SPRB
The new telescopic mid-level spreader allows you to set the proper leg
angle and resulting tripod footprint.
TRIPOD SPREADER 165
TRIPOD SPREADER
FOR SPIKED FEET 165MV
Universal tripod spreader with variable diameter width controls from 80 to
130cm (31.5 to 51.2in).
Universal tripod spreader with variable diameter width controls from 80mm
to 130mm (31.5 to 51.2in). It accepts spiked tip tripod.
0.6kg
1.4lb
0.6kg
1.4lb
80-130cm
31.5-51.2in
80-130cm
31.5-51.2in
TRIPODS
DOLLY
PRO
MODELS
114
114MV
127
MID SPREADER
127VS
181B
537SPRB
545B
X
X
545GB
X
X
546B
X
X
546GB
X
X
X
X
X
X
X
X
M PRO
X
165MV
X
535
X
X
X
536
X
X
X
MDEVE
X
165
755CX3
PRO
547B
SPREADER
528XB
X
X
X
X
117B
X
X
X
X
755XB
PLEASE NOTE: this chart only shows technical compatibility. When assembling the products always consider the maximum load of the component
with the lowest loading capacity.
58
ACCESSORIES
REVERSIBLE SPIKED FEET 204SPK3
Reversible rubber/metal spiked feet (set of 3) supplied with a dedicated fixing tool. The spike is made of a special hard anodized aluminium alloy extremely resistant
to corrosion. See chart below for tripod compatibilty.
SUCTION CUP/RETRACTABLE SPIKE FEET 204SCK3
A rubber suction cup feet (set of 3) with retractable stainless steel spike.The suction cup increases the footprint of the foot by almost 20 times, giving much greater
stability when needed. See chart below for tripod compatibilty.
SPIKE FOOT SHOES 565
Set of 3. See chart below for tripod compatibilty.
TRIPODS
REVERSIBLE FEET
MODELS
204SPK3
SUCTION CUP FEET
204SCK3
565
545B
PRO
545GB
X
546B
546GB
X
M PRO
535
MDEVE
755CX3
X
X
755XB
X
X
PRO
547B
528XB
536
117B
59
ACCESSORIES
100MM HALF BALL 500BALL
Half ball for leveling video heads on video tripod.
Length 17cm (6.7in). Attachment: 3/8” male thread.
100MM SHORT HALF BALL 500BALLSH
The 500BALLSH comes complete with a short locking handle to mount all Manfrotto flat-base heads to the 529B Hi-Hat.
Length 12.5cm (4.9in). Attachment: 3/8” male thread.
75MM HALF BALL 520BALL
Half ball for leveling video heads on video tripods provided with 75mm bowl.
Length 16cm (6.3in). Attachment: 3/8” male thread.
75MM SHORT HALF BALL 520BALLSH
The 520BALLSH comes complete with a short locking handle to mount all Manfrotto flat-base heads to any 75mm bowl tripod including the 529B Hi-Hat (with optional adapter 319).
Lenght 11.5cm (4.5in). Attachment: 3/8” male thread.
60
GENERAL ACCESSORIES
100MM TO 75MM ADAPTER 319
Converts all Manfrotto 100mm bowl tripods into a 75mm bowl.
VIDEO HEAD BOWL ADAPTER 325N
Adapter system to connect a 75 or 100mm half bowl video head to a flat base tripod.
HI-HAT 529B
The 482LCD mini ball head is a swivel mounting accessory than can be
attached to the bottom of LCD or TFT monitors so you can mount the
monitor to the top of the camera by using the “hot shoe” located on the top
of most camcorders.
529B Hi-Hat enables you to get shots from the dog’s perspective. The 529B
has a 100mm half-bowl, adjustable leg angles to mount the camera in the
tightest or lowest of locations and thanks to the built-in spreader you can
simply use the 529B on any even surface. The feet are rubber-padded to
protect delicate surfaces and have a hole so that the 529B can be screwed
to a ladder, apple-box or a sheet of wood.
Recommended heads:
- 526
- 519 (with 319 adapter)
- 516 (with 500BALLSH half ball)
- 504HD
- 501HDV (with 500BALLSH half ball)
2kg
4.4lb
20kg
44.1lb
LCD MINI BALL HEAD 482LCD
6.4cm
2.5in
0.15kg
0.3lb
14.5cm
5.7in
19.5cm
7.7in
20.5cm
8.1in
2.7kg
6lb
61
BAGS AND STRAPS
Not only bags!! But I would leave it off and start
with Manfrotto video product range is completed
with a range of soft goods that allows an easy
transportation and storage. A complete family
of padded bags developed with multihandles
and internal pockets, six different dimensions
from the smallest MBAG70N up to the largest
MBAG120PN. Different typologies of straps are
available, presenting different design and materials
for alternative carrying solutions.
62
Easy access even with the bigger video
tripods.
Rebated zippers.
Attention to details: small injected
Manfrotto logo on the handles.
Comfortable carrying handle.
Rubberized Manfrotto loop, helps when
using the zips. This feature is used on
all the new Manfrotto bags, functional
and iconic.
Inner pocket for tripod accessory
storage.
Thermoformed padding with the new
Manfrotto logo.
BAGS
MBAG120PN
MBAG100PN
MBAG90PN
MBAG80PN
MBAG80N
MBAG70N
120CM PADDED TRIPOD BAG MBAG120PN
The largest bag in the range, the MBAG120PN is padded to protect your equipment and has the following features:
• Asymmetric tapered shape allows you to store the tripod with the head attached.
Tripod legs fit comfortably in the narrower end and extra space is allowed for the larger volume of the head at the wider end. Diameter 23cm (9.1in).
• Zipper extends down the length of the bag, but also fully opens the top end of the bag.
• Thermoform padding holds the tripod in place in the bag and protects it, especially the head, during transport.
• Inner pocket holds accessories (such as video head pan bars).
• Innovative design and style; ballistic nylon, zips and other materials used are of top quality.
• Can be hand-carried horizontally by the side handle, vertically by the end handle (also useful for storage), or shoulder-carried using the included strap.
100CM PADDED TRIPOD BAG MBAG100PN
Same design of MBAG120PN 20cm smaller and without the double positioning carrying handle.
Diameter 23cm (9.1in).
90CM PADDED TRIPOD BAG MBAG90PN
Same design of MBAG120PN 30cm smaller and without the double positioning carrying handle.
Diameter 23cm (9.1in).
80CM PADDED TRIPOD BAG MBAG80PN
Same design of MBAG120PN 40mm smaller and without the side handle or inner accessory pocket. The MBAG80PN is also narrower than the other padded bags.
The narrow end measures 13cm (5.1in) diameter, the wide end measures 15cm (5.9in).
80CM UNPADDED TRIPOD BAG MBAG80N
The MBAG80N is an unpadded tripod bag.
• Slightly tapered to provide a better fit for your tripod with attached head. The wider end of the bag accommodates the head without requiring all levers to be removed.
• Zipper extends down the length of the bag, but also fully opens the top end of the bag.
• Logo end cap is padded to offer protection to the tripod head, the rest of the bag is unpadded.
• Shoulder strap included (the MBAG80N doesn’t have either end or side handle).
• Innovative design and style; ballistic nylon, zips and other materials used are of top quality. Diameter 13cm (5.1in).
70CM UNPADDED TRIPOD BAG MBAG70N
Same design of MBAG80N 10cm smaller.
63
STRAPS
QUICK ACTION STRAP 401N
A quick and easy accessory for carrying your tripod when walking, hiking, cycling or just getting from shoot to shoot. Use the shorter straps to fasten the padded 401N
to one of the legs of your tripod, bind the remaining legs together using the longer adjustable quick release straps, sliding the tripod over your shoulder and you’re
ready to go, with your hands free to grab those vital last minute items. The padding helps hold the tripod in place and protects your back from bruises and chaffing.
The 401N even stays attached to your tripod when shooting (all you need to do is release the longer quick release straps so you can maneuver and position all three legs),
so you’re always ready to capture the images you want, but also always ready to move off again to the next location.
Straps can be removed and custom-positioned to better match
the size of your tripod.
The strap stays attached to your tripod
when shooting.
TRIPOD HANDLE STRAP MSTRAP-2
The MSTRAP-2 is a convenient and smart way to carry a video tripod plus a head. The ergonomics of this strap allows to carry easily the products. Safe grip thanks
to the rubber coated adjustable velcro. Easy to mount, safely hooked to the upper casting of the tripod. Well balanced, also with heavy duty video heads, thanks to
the ergonomics of the handle.
64
STRAPS
LONG STRAP 102
The 102 strap is a basic but convenient way to carry your system. It has a spring clip that fastens quickly to the steel ring at the shoulder of the tripod, and a closed
loop that goes around the feet of the tripod and tightens to grip them securely. Features an adapter for compatibility with all Manfrotto tripods and rubberized fabric for
comfort and to avoid the tripod slipping on your shoulder.
SHORT STRAP 402
The 402 is a simple loop strap, with a single spring clip that attaches quickly to the steel ring at the shoulder of your tripod. Features an adapter for compatibility
with all Manfrotto tripods. Strap is in grey rubberized fabric for comfort and to avoid the tripod slipping on your shoulder.
TRIPOD SHOULDER STRAP MSTRAP-1
The MSTRAP-1 allows you to carry the tripod when attached to the ring positioned right under the tripod collar.
65
Index
Art. N°
66
Description
Page
Art. N°
Description
Page
035C
SUPER CLAMP
43
522EX10
EXTENSION CABLE SONY “EX” SERIES
037
CAMCORDER CAMERA MOUNTING STUD
43
522EXTC30
REMOTE CONTROL CABLE SUPER EXTENSION
53
102
LONG STRAP
65
522P
REMOTE CONTROL FOR PANASONIC
49
114
VIDEO DOLLY
57
522PB 12
REMOTE PAN BAR ADAPTER
48
50
48-50
114MV
PORTABLE DOLLY
57
522PB 12P
REMOTE PAN BAR ADAPTER
117B
PRO VIDEO TRIPOD
39
522PB 13
REMOTE PAN BAR ADAPTER
48
127
VIDEO DOLLY
57
522PB 13P
REMOTE PAN BAR ADAPTER
50
127VS
BASIC DOLLY
57
522PB 14
REMOTE PAN BAR ADAPTER
48
143RC
MAGIC ARM WITH QUICK RELEASE PLATE
42
522PB 14P
REMOTE PAN BAR ADAPTER
50
165
TRIPOD SPREADER
58
522PB 16
REMOTE PAN BAR ADAPTER
48
165MV
TRIPOD SPREADER FOR SPIKED FEET
58
522PB 16P
REMOTE PAN BAR ADAPTER
50
181B
FOLDING AUTODOLLY
57
522PB 18
REMOTE PAN BAR ADAPTER
48
200PL-14
VIDEO CAMERA PLATE
56
522PB 18P
REMOTE PAN BAR ADAPTER
50
204SCK3
SUCTION CUP/RETRACTABLE SPIKE FEET
59
522PB 22
REMOTE PAN BAR ADAPTER
48
204SP1
REVERSIBLE SPIKED FOOT
40
522PB 22P
REMOTE PAN BAR ADAPTER
50
48
204SPK3
REVERSIBLE SPIKED FEET
59
522PB 25
REMOTE PAN BAR ADAPTER
234
MONOPOD TILT TOP
43
522PB 30
REMOTE PAN BAR ADAPTER
234RC
MONOPOD QUICK RELEASE TILT TOP
43
522SCA
REMOTE CONTROL CABLE STANDARD
241
PUMP CUP
43
523PROi
PRO REMOTE CONTROL
241FB
PUMP CUP WITH FLAT BASE
43
523RC
RAIN COVER FOR REMOTE CONTROL
48
48-50
46
48-50
244RC
VARIABLE FRICTION ARM WITH QUICK RELEASE PLATE
42
524ADAPT
ADAPTER CABLE
250SP1
RUBBER/SPIKED FOOT
40
524CFi
INTELLIGENT ZOOM REMOTE CONTROL FOR ENG LENSES
52
52
319
100MM TO 75MM ADAPTER
61
526
PRO FLUID VIDEO HEAD
24
323
RECTANGULAR VIDEO QUICK RELEASE ADAPTER
56
526, 528XBK
VIDEO SYSTEM
8
325N
VIDEO HEAD BOWL ADAPTER
61
526, 536K
VIDEO SYSTEM
9
357
ADAPTER
56
526, 545BK
VIDEO SYSTEM
9
357PLONG
VIDEO CAMERA PLATE
56
526, 545GBK
VIDEO SYSTEM
8
357PLV
VIDEO CAMERA PLATE
56
528XB
PRO VIDEO HEAVY TRIPOD
38
386BC
NANO CLAMP
43
529B
HI-HAT
61
401N
QUICK ACTION STRAP
64
537SPRB
MID LEVEL SPREADER
58
402
SHORT STRAP
65
535
MPRO CARBON FIBER 2-STAGE VIDEO TRIPOD
35
449SP2
REVERSIBLE SPIKED FOOT
40
536
MPRO CARBON FIBER 3-STAGE VIDEO TRIPOD
35
482LCD
LCD MINI BALL HEAD
61
545B
PRO HEAVY-DUTY VIDEO TRIPOD
31
500BALL
100MM HALF BALL
60
545GB
PRO HEAVY-DUTY VIDEO TRIPOD
31
500BALLSH
100MM SHORT HALF BALL
60
546B
PRO VIDEO TRIPOD
32
501HDV
PRO VIDEO HEAD
27
546GB
PRO VIDEO TRIPOD
32
501HDV, 535K
VIDEO SYSTEM
16
547B
PRO LIGHTWEIGHT VIDEO TRIPOD
33
501HDV, 546BK
VIDEO SYSTEM
14
557B
VIDEO MONOPOD
40
501HDV, 546GBK
VIDEO SYSTEM
15
558B
VIDEO MONOPOD
40
501HDV, 547BK
VIDEO SYSTEM
16
559B
VIDEO MONOPOD
40
501HDV, 755CX3K
VIDEO SYSTEM
17
560B
FLUID VIDEO MONOPOD
41
501HDV, 755XBK
VIDEO SYSTEM
17
561BHDV
FLUID VIDEO MONOPOD
41
501HLV
PAN BAR
56
562B
FLUID VIDEO MONOPOD
41
501PL
VIDEO CAMERA PLATE
56
565
SPIKE FOOT SHOES
59
504PLONG
VIDEO CAMERA PLATE
56
577
VIDEO QUICK RELEASE ADAPTER
56
504HD
PRO FLUID VIDEO HEAD
23
595B
FIG RIG
54
504HD, 535K
VIDEO SYSTEM
7
595CLA
FIG RIG CLAMP
55
504HD, 536K
VIDEO SYSTEM
7
700RC2
MINI VIDEO HEAD
29
504HD, 546BK
VIDEO SYSTEM
6
700RC2, 755CX3K
VIDEO SYSTEM
20
504HD, 546GBK
VIDEO SYSTEM
6
700RC2, 755XBK
VIDEO SYSTEM
20
504HLV
PAN BAR
56
701HDV
MINI VIDEO HEAD
28
516
PRO FLUID VIDEO HEAD
26
701HDV, 755XBK
VIDEO SYSTEM
19
516, 535K
VIDEO SYSTEM
13
701HDV, 547BK
VIDEO SYSTEM
18
516, 545BK
VIDEO SYSTEM
12
701HDV, 755CX3K
VIDEO SYSTEM
19
516, 545GBK
VIDEO SYSTEM
12
701HLV
PAN BAR
56
516, 546GBK
VIDEO SYSTEM
13
755CX3
MDEVE MAGFIBER VIDEO TRIPOD
37
519
PRO FLUID VIDEO HEAD
25
755XB
MDEVE ALUMINIUM VIDEO TRIPOD
37
519, 535K
VIDEO SYSTEM
11
814-1
MINI HYDROSTATIC ARM
42
519, 546BK
VIDEO SYSTEM
10
819-1
SMALL HYDROSTATIC ARM
42
519LV
PAN BAR
56
823
MEDIUM HYDROSTATIC ARM
42
520BALL
75MM HALF BALL
60
MBAG100PN
100CM PADDED TRIPOD BAG
63
520BALLSH
75MM SHORT HALF BALL
60
MBAG120PN
120CM PADDED TRIPOD BAG
63
521CFi
BASIC INTELLIGENT ZOOM REMOTE CONTROL FOR ENG LENSES 53
MBAG70N
70CM UNPADDED TRIPOD BAG
63
521EX
REMOTE CONTROL FOR SONY
53
MBAG80N
80CM UNPADDED TRIPOD BAG
63
521i
CLAMP REMOTE CONTROL FOR SONY AND CANON
47
MBAG80PN
80CM PADDED TRIPOD BAG
63
521LX
CLAMP Hi-END REMOTE CONTROL FOR SONY AND CANON
45
MBAG90PN
90CM PADDED TRIPOD BAG
63
521P
BASIC REMOTE CONTROL FOR PANASONIC
50
MICC1
MICROPHONE CLIP
55
521PROi
PRO REMOTE CONTROL FOR SONY AND CANON
47
MICC2
MICROPHONE SPRING CLIP
55
521PFi
FOCUS/IRIS CONTROL FOR PANASONIC
51
MICC4
UNIVERSAL SHOCK MOUNT MICROPHONE HOLDER
55
521SB
REMOTE CONTROL SPLITTER BOX
54
MSTRAP-1
TRIPOD SHOULDER STRAP
65
522AV
ADAPTOR CABLE FOR “AV-R” SONY CONNECTOR
48
MSTRAP-2
TRIPOD HANDLE STRAP
64
Key to symbols
Tripod symbols
Closed length
Twin leg
Minimum height
Single leg
Maximum height
75mm + 100mm bowl
Maximum height with
extended center column
75mm bowl
Footprint diameter
100mm bowl
• Maximum load capacity
• All stated maximum load capacity are measured
centered on the tripod/head mounting point.
60mm bowl + half ball included
Weight
75mm bowl + half ball included
Head height
100mm bowl + half ball included
Plate supplied with the head
Flat base with 3/8” screw +
extendible (geared) center column
Leveling flat base with 3/8” screw +
extendible center column
Aluminium
Head symbols
Carbon Fiber
Magnesium
CBS is our Counterbalance System; a fundamental part of what makes our video heads such useful video tools. The principal
function of CBS is to cancel out the slow falling effect seen in video footage when the videocamera’s own weight causes it
to tilt forward or backward on an unbalanced video head. CBS ensures that the cameraman need only apply minimal effort
to the head’s pan bar to move the camera precisely and smoothly.
1 stage
2 stages
FDS is a friction system used across the Manfrotto video head and monopod ranges, based on specially developed cartridges
that make movements fluid and help stop unwanted vibrations (such as those from the video operator’s own hand) being
transmitted. Our range uses two types of FDS: fixed and variable. Variable FDS allows you to regulate and control the level
of friction applied based on the type and style of video you’re shooting, on the weight of your camera equipment and on
climatic conditions and temperature.
3 stages
67
Lino Manfrotto + Co., Spa
Via Sasso Rosso, 19
I-36061 Bassano del Grappa (VI) Italia
T +39 0424 555 855
F +39 0424 808 999
www.manfrotto.com
Product photography: Roberto Bigano
Concept: Claim adv
While every effort has been made to ensure that the information contained within this catalog is correct, Manfrotto accepts no liability for errors or omissions. Technical specifications and data are provided for
guidance only. All rights are strictly reserved. Products shown in this catalog are protected by international patents, while copying this publication (in whole or in part) without written consent from Manfrotto is strictly
forbidden and punishable by law. Because we constantly aim to improve our products, we reserve the right to amend or alter at any time and without prior notice the specifications of any item detailed in this publication.
ISSUE CODE LNORDV10,G - ISSUE NUMBER N°1 - 04/10