Kingston Technology HyperX KHX6400D2B1K2/2G memory module

T E C H N O L O G Y
Memory Module Specification
KHX6400D2B1K2/2G
DESCRIPTION:
2GB (1GB 128M x 64-Bit x 2 pcs.)
PC2-6400 CL5 240-Pin DIMM Kit
Kingston's KHX6400D2B1K2/2G is a kit of two 128M x 64-bit 1GB (1024MB) DDR2-800 CL5
SDRAM (Synchronous DRAM) memory modules, based on eight 128M x 8-bit DDR2 FBGA
components per module. Total kit capacity is 2GB (2048MB). The SPDs are programmed to JEDEC
standard latency 800MHz timing of 5-5-5-15 at 1.8V. Each 240-pin DIMM uses gold contact fingers
and requires +1.8V. The electrical and mechanical specifications are as follows:
FEATURES:
Power supply : Vdd: 1.8V ± 0.1V, Vddq: 1.8V ± 0.1V
Double-data-rate architecture; two data transfers per clock cycle
Bidirectional data strobe(DQS)
Differential clock inputs(CK and CK)
DLL aligns DQ and DQS transition with CK transition
Programmable Read latency 5 (clock)
Burst Length: 4, 8 (Interleave/nibble sequential)
Programmable Burst type (sequential & interleave)
Timing Reference: 800MHz 5-5-5-15 at +1.8V
Edge aligned data output, center aligned data input
Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)
Serial presence detect with EEPROM
High Performance Heat Spreader
PCB : Height 1.180” (30.00mm), single sided component
PERFORMANCE:
Clock Cycle Time (tCK) CL=5
Row Cycle Time (tRC)
Refresh to Active/Refresh Command Time (tRFC)
Row Active Time (tRAS)
Single Power Supply of
Power
UL Rating
Operating Temperature
Storage Temperature
Document No. 4805599-001.A00
05/21/10
2.5ns (min.) / 8ns (max.)
57.5ns (min.)
127.5ns
45ns (min.) / 70,000ns (max.)
+1.8V (+/- .1V)
1.040 W (operating per module)
94 V - 0
0o C to 55o C
-55o C to +125o C
Page 1
Kingston Technology
MODULE DIMENSIONS:
Units: millimeters
2.7
1.270 ± 0.10
4.00
3.00
2.50±0.20
5.00
4.00
0.80±0.05
3.80
2.50
1.50±0.10
0.20
1.00
4.00
w/ Heatsink Assembly
For more information, go to www.kingston.com
All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not
operate at the published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to
run their computers faster than the published speed. Overclocking or modifying your system timing may result in damage to
computer components.
Document No. 4805599-001.A00
Page 2