Hewlett Packard Enterprise ProLiant 603569-B21 server

QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Overview
HP ProLiant BL460c G7 Server Blade
1. Two (2) mezzanine I/O expansion slots
5. Two (2) small form factor (SFF) hot-plug drive bays
2. Internal USB connector
6. Local I/O Connector
3. Twelve (12) DDR3 Registered or Unbuffered DIMM Memory 7. Internal SD card slot
Slots
8. Up to two (2) Intel® Xeon® 5500 or 5600 series processors
4. HP Smart Array P410i Controller (under drive bays)
9. Access Panel
What's New
Support for new HP 300GB 6G SAS 15K 2.5" Enterprise Hard Disk Drive
At A Glance
This document covers the HP ProLiant BL460c G7 server blade only. For more information on HP BladeSystems c-Class Enclosures
and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:
HP BladeSystem c-Class Enclosures QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_na/12790_na.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_na/12810_na.html
DA - 13706
North America — Version 21 — November 18, 2011
Page 1
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Overview
HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
The HP ProLiant BL460c G7 provides greater 2P x86 server blade density without compromise and maximum power-efficiency with
flexibility and choice.
HP ProLiant BL460c G7 server blade includes:
Processor:
Processor
Up to two (2) Intel® Xeon® 5500 or 5600 series processors
Intel® 5520 Chipset
Memory:
Memory
Twelve (12) DIMM slots
Up to 384GB, using PC3-10600 DDR3 registered (RDIMM) memory, operating at 800MHz when fully populated at 2
DIMMs per channel in 12 slots
Up to 48GB, using PC3-10600 DDR3 unbuffered (UDIMM) memory, operating at 1333MHz when fully populated at 2
DIMMs per channel in 12 slots
Storage Controller:
Controller
HP Smart Array P410i Controller with no cache supporting RAID 0 and 1
Internal Drive Support:
Support
Two (2) hot-plug small form factor (SFF) drive bays
Support for SAS, SATA, and SSD hot-plug hard drives
Network Controller:
Controller
Integrated NC553i Dual Port FlexFabric 10Gb Adapter supporting autosensing 10Gb/1Gb Ethernet, FCoE, Flex-10,
TCP/IP offload engine, hardware-based accelerated iSCSI, and iSCSI boot.
NOTE: Fibre Channel over Ethernet (FCoE) capability requires the use of an HP Virtual Connect FlexFabric 10Gb/24port Module or HP 10GbE Pass-Thru Module. Learn more at: www.hp.com/go/virtualconnect.
NOTE: Each port is autosensing 1 Gb/10 Gb, and can interoperate with 1 Gb HP BladeSystem c-Class interconnect
components. Both ports will operate at the same speed.
One (1) additional 10/100 server adapter dedicated to iLO 3 Management
Mezzanine Support:
Support
Two (2) I/O expansion mezzanine slots
Supports up to two (2) mezzanine cards
Dual-port FlexFabric adapter mezzanine options
Dual-port Fibre Channel mezzanine (4 Gb or 8 Gb) options for SAN connectivity
Multi-port 1Gb and 10Gb Ethernet server adapter mezzanine options for additional network ports
InfiniBand (IB) mezzanine options for low latency and high bandwidth server interconnectivity
I/O accelerator mezzanine options for high transaction rate local storage
Smart Array SAS RAID controller mezzanine options for external direct attach and shared SAS storage
Expansion Blade Support:
Support
Supports one (1) optional storage, tape, or PCI expansion blade
Internal Media Support:
Support
One (1) internal USB 2.0 connector for USB flash media drive keys
One (1) internal secure digital (SD) card slot
Trusted Platform Module:
Module
One (1) internal TPM 1.2 module connector
Form Factor:
Factor
HP ProLiant BL460c G7 is a half-height server blade that plugs into the HP BladeSystem c3000 and c7000 enclosures
Infrastructure Management:
Management
This server blade requires the latest version of the Onboard Administrator firmware. This firmware release may also
require other subsystem firmware upgrades. For information on the latest firmware versions, please see the Blades
DA - 13706
North America — Version 21 — November 18, 2011
Page 2
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Overview
Firmware Maintenance website at: http://h18004.www1.hp.com/products/blades/components/c-classcompmatrix.html
HP Integrated Lights-Out 3 (iLO 3) management processor for simplified server setup, health monitoring and recovery,
power and thermal control, and lights-out remote administration.
HP Insight Control, a product option, delivers essential infrastructure management that can help save time and money
by making it easy to deploy, migrate, monitor, control and optimize your IT infrastructure through a single, simple
management console. Insight Control supports both Windows and Linux-based central management servers.
HP Insight Dynamics for ProLiant, a product option, is an integrated command center that enables IT Staff personnel to
continuously analyze and optimize a converged infrastructure, while automating and reducing the cost of common data
center tasks by as much as 40 percent. This ultimately enables them to dynamically keep pace with the organization's
changing business requirements.
Operating Systems and Virtualization Software:
Software
Supports Windows, RHEL, SLES, Oracle Solaris, VMware, and Citrix XenServer
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization Software and
latest listing of software drivers available for your server, please visit our Operating System Support Matrix at:
http://www.hp.com/go/ossupport and the BL460c G7 driver download page.
Enclosures:
Enclosures
HP offers two different c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds up to sixteen (16) ProLiant BL460c G7 servers
plugged vertically.
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to eight (8) HP ProLiant BL460c G7 servers
plugged horizontally.
Server blades, storage blades, interconnect modules, power supplies, fans, and redundant Onboard Administrator
modules are all designed to fit into the c3000 and c7000 enclosures.
For additional enclosure information, please see:
http://h18004.www1.hp.com/products/blades/components/enclosures/c-class/index.html.
Warranty:
Warranty
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP
Authorized Channel Partners. Hardware diagnostic support and repair is available for three years from date of
purchase. Support for software and initial setup is available for 90 days from date of purchase. Enhancements to
warranty services are available through HP Care Pack services or customized service agreements. Certain restrictions
and exclusions apply. Hard drives have either a one year or three year warranty; refer to specific hard drive QuickSpecs
for details.
NOTE: Server warranty includes 3 year Parts, 3 year Labor, 3-year on-site support. Warranty repairs may be
accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory
CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a
Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity.
Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding
worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 13706
North America — Version 21 — November 18, 2011
Page 3
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Standard Features
Processor
One of the following
depending on Model
Six-Core Processors
Intel® Xeon® X5675 (3.06GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3) Processor
Intel® Xeon® Processor X5670 (2.93GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3)
Processor
Intel® Xeon® Processor X5660 (2.80GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3)
Processor
Intel® Xeon® Processor X5650 (2.66GHz/6-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/2/2/3/3)
Processor
Intel® Xeon® Processor E5649 (2.53GHz/6-core/12MB/80W, DDR3-1333, HT, Turbo 1/1/1/1/2/2)
Processor
Intel® Xeon® Processor E5645 (2.40GHz/6-core/12MB/80W, DDR3-1333, HT, Turbo 1/1/1/1/2/2)
Processor
Intel® Xeon® Processor L5640 (2.26GHz/6-core/12MB/60W, DDR3-1333, HT, Turbo 2/2/3/3/4/4)
Processor
Four-Core Processors
Intel® Xeon® Processor X5672 (3.20GHz/4-core/12MB/95W, DDR3-1333, HT, Turbo 2/2/3/3)
Processor
Intel® Xeon® Processor X5667 (3.06GHz/4-core/12MB/95W, DDR3-1333, HT, Turbo 1/1/2/2)
Processor
Intel® Xeon® Processor L5630 (2.13GHz/4-core/12MB/40W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor L5520 (2.26GHz/4-core/8MB/60W, DDR3-1066, HT, Turbo 1/1/2/2)
Processor
Intel® Xeon® Processor E5640 (2.66GHz/4-core/12MB/80W, DDR3-1066, HT, Turbo 1/1/2/2)
Processor
Intel® Xeon® Processor E5630 (2.53GHz/4-core/12MB/80W, DDR3-1066, HT, Turbo 1/1/2/2)
Processor
Intel® Xeon® Processor E5620 (2.40GHz/4-core/12MB/80W, DDR3-1066, HT, Turbo 1/1/2/2)
Processor
Intel® Xeon® Processor E5607 (2.26GHz/4-core/8MB/80W, DDR3-1066) Processor
Intel® Xeon® Processor E5506 (2.13GHz/4-core/4MB/80W, DDR3-800) Processor
Two-Core Processors
Intel® Xeon® Processor E5503 (2.0GHz/2-core/4MB/80W, DDR3-800) Processor
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost
Technology, with 4, 3, 2, and 1 cores active (on four-core processors) or with 6, 5, 4, 3, 2, and 1 cores
active (on six-core processors).
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.
NOTE: For the Intel Xeon 5500 and 5600 Series, the letter preceding the model number indicates the
performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise
Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.
Upgradeability
Upgradeable to two (2) processors
DA - 13706
North America — Version 21 — November 18, 2011
Page 4
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Standard Features
Cache Memory
One of the following
depending on Model
4MB shared L3 cache
8MB shared L3 cache
12MB shared L3 cache
Chipset
Intel® 5520 Chipset
Memory
Type
Standard
Maximum (RDIMM)
Maximum (UDIMM)
DDR3 Registered (RDIMM) or Unbuffered (UDIMM)
6 GB (3 x 2GB) RDIMM
384GB (12 x 32 GB) for registered memory configurations
48 GB (12 x 4 GB) for unbuffered memory configurations
NOTE: A minimum of 2GB of memory must be installed.
NOTE: Depending on the memory configuration and processor model the memory speed may operate
at 1333MHz, 1066MHz or 800MHz. Please see the Online Memory Configuration Tool for details:
www.hp.com/go/ddr3memory-configurator.
DDR3 memory options part number decoder
Memory Protection
Advanced ECC (multi-bit error protection)
Memory Mirroring Mode
Memory Lock-Step Mode
Memory Online Spare Mode supported on Intel Xeon 5600 Series processors
Network Controller
Integrated NC553i Dual Port FlexFabric 10Gb Adapter
NOTE: FlexFabric capability requires the use of an HP Virtual Connect FlexFabric module or HP 10GbE
Pass-Thru Module. Learn more at: www.hp.com/go/virtualconnect.
One (1) additional 10/100 NIC dedicated to iLO 3 Management
I/O Expansion Slots
Two (2) I/O expansion mezzanine slots (x8 PCI Express)
DA - 13706
North America — Version 21 — November 18, 2011
Page 5
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Standard Features
Integrated Manageability HP Integrated Lights-Out 3 (iLO 3) management processor
Storage Controller
Type
HP Smart Array P410i Controller with no cache supporting RAID 0 and 1
Available Options: 256MB cache, 1G and 512MB Flash Backed Write Cache (FBWC), and Smart Array
Advanced Pack.
NOTE: Supports two (2) small form factor (SFF) hot plug drive bays.
Maximum Internal
Storage
One of the following
depending on Model
Hot-plug SAS
Hot-plug SATA
Hot-plug SAS SSD
2.0TB
2.0TB
1.6TB
2 x 1.0TB drives
2 x 1.0TB drives
2 x 800GB drives
Hot-plug SATA SSD
800GB
2 x 400GB drives
Graphics
Integrated Matrox G200
Resolution Color Depths
1600 x 1200, 64K, 256, 16
1280 x 1024, 16.7M, 64k, 256, 16
1024 x 768, 16.7M, 64k, 256,16
800 x 600, 16.7M, 64k, 256, 16
640 x 480, 16.7M, 64k, 256, 16
NOTE: Maximum resolution available via HP Integrated Lights-Out 3 (iLO 3) remote console is 1280 x
1024.
Fibre Channel Support
Two (2) optional Fibre Channel HBAs are supported by the HP ProLiant BL460c G7. Both mezzanine
circuit boards connect directly to the server blade system board. These Fibre Channel HBAs are available
via option kits and must be ordered separately.
HBA mezzanine card option kits:
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (403621-B21)
Based on the same field-proven ASIC, firmware, and driver technology as Emulex's renowned
LPe1150 HBA, the Emulex LPe1105-HP is fully driver compatible with all Emulex HBAs
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (456972-B21)
Exceptional performance, enhanced security, and scalable management for virtual server and
enterprise-class applications
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (403619-B21)
Uses common drivers which means that customers can standardize on one QLogic driver whether
they are using the QMH2462 or other HBAs powered by QLogic
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem (451871-B21)
Provides a first step into the 8Gb future, advanced, embedded support for virtualized
environments and reduced power consumption
DA - 13706
North America — Version 21 — November 18, 2011
Page 6
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Standard Features
HP BLc Brocade 804 8Gb Fibre Channel Host Bus Adapter (590647-B21)
Application oriented quality of service (AQoS) providing the ability to configure, prioritize, and
optimize traffic flows from virtual machines and/or applications to the target port
Brocade, Emulex and QLogic Fibre Channel HBAs for HP BladeSystem c-Class feature:
Optimal performance utilizing PCI Express
4/2/1Gb/s auto negotiating speeds (4Gb HBAs)
8/4/2Gb/s auto negotiation speeds (8Gb HBAs)
Dual-ports for redundant path connections
Up to two Fibre Channel (FC) HBAs per server blade providing redundant FC HBA support
Optimized for HP Storage products and supported by third party SAN vendors
Support for Microsoft® Windows® and Linux operating system environments
Compatible SAN
HP ProLiant BL460c G7 server blades are optimized for HP MSA, EVA and XP.
HP ProLiant BL460c G7 server blades are compatible with select 3rd party SANs (please see blade
storage page for more details: http://h18004.www1.hp.com/products/blades/components/c-classsans.html
HP Virtual Connect
HP Virtual Connect is an interconnect option for BladeSystem c-Class that simplifies server connectivity to
data and storage networks, and reduces costs. Unique HP Flex-10 and FlexFabric technologies make
maximum use of network bandwidths, provide dynamic tuning and enable extreme flexibility to meet
individual server and infrastructure requirements. HP Virtual Connect Enterprise Manager (VCEM)
provides a central console to administer network connections and workloads for thousands of servers.
For more information on Virtual Connect Ethernet, Fibre Channel, Converged Network and
management options see: www.hp.com/go/virtualconnect
HP Insight management
software
HP Service Pack for
ProLiant
HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM)
version 5 provide a new, comprehensive approach to firmware and system
software maintenance. Together they provide better operating stability and
ensure maximum uptime. The SPP will be updated at a predictable cadence,
typically coinciding with new HP server hardware launches. By enabling
firmware to be updated online and integrating firmware and system software
updates in one operation HP SUM and the SPP offer faster updates of
individual servers and dramatically faster updates of entire BladeSystem
enclosures. Further improving system uptime and stability is the fact that HP
provides 12 months of support on each Service Pack for ProLiant.
The user experience around HP SUM and the SPP has been improved in
several ways, starting with the web download. A single web page provides
access to a single download containing both the latest version of HP SUM
version 5 and the latest SPP. Optional smaller subsets with only specific types
of servers or specific operating systems are offered to save on download
time. The HP SUM application has been re-written to provide a more
straightforward, intuitive user interface that guides the user through the steps
of discovery, analyses and update, providing comprehensive information on
available updates, criticality and interdependencies. This information is also
DA - 13706
North America — Version 21 — November 18, 2011
Page 7
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Standard Features
available in reports. By providing the option of multiple local or shared
repositories which can be easily updated from hp.com, HP SUM provides the
tools to optimize stability and consistency throughout the company. While HP
SUM and the SPP will recommend the combinations of firmware and system
software that HP has found to be the best practice, the application gives
customers the flexibility to set their own specific baseline.
The Service Pack for ProLiant has been rigorously tested with specific
attention for interaction between firmware, drivers and agents both within the
server as well as in interaction with the BladeSystem enclosure components
(Onboard Administrator and Virtual Connect). This testing ensures the
highest quality as well as providing the input for HP SUM to deploy updates
taking into account all interdepencies, when determining the correct updates
and order of update deployment.
HP Insight Foundation
The Service Pack for ProLiant (which includes HP SUM 5) can be
downloaded from www.hp.com/go/spp/download. More information can be
found: www.hp.com/go/spp and http://www.hp.com/go/hpsum
Insight Foundation is being baselined at version v8.70 which means the
following:
Its Media Kit (contains 2 SmartStart CDs, the Firmware DVD, and the
Management DVD) will continue to ship with all supported ProLiant
G7 or earlier BTO servers until the last supported server is no longer
shipping.
The Media Kit will not be updated past version 8.70.
ProLiant G7 or earlier CTO servers are able to order the Media Kit
with the understanding that the media is not updated. Please check
specific server QuickSpecs for availability of CTO Kit.
PSP and Firmware DVD downloads will be updated through 2Q 2012
at the HP Insight Foundation Suite for ProLiant downloads tab:
http://www.hp.com/go/foundation
Customers are urged to use the replacement product, HP Service Pack for
ProLiant, instead of Insight Foundation Suite which is found at these location:
HP Integrated Lights-Out
(iLO)
HP Insight Control
DA - 13706
www.hp.com/go/spp
www.hp.com/go/spp/download
HP Integrated Lights-Out (iLO) simplifies server setup, health monitoring,
power and thermal control, and lights-out remote administration of ProLiant
ML, DL, and BL servers. HP iLO functions without additional software and
can be accessed from any location via a web browser. HP iLO works handin-hand with HP Systems Insight Manager, Insight Control suites, and Insight
Dynamics for ProLiant, helping customers unleash the value of the ProLiant
platform and deliver the highest possible quality of IT service. For more
information, visit: www.hp.com/go/iLO
HP Insight Control, a product option, delivers essential infrastructure
management that can help save time and money by making it easy to
deploy, migrate, monitor, remote control, and optimize your IT infrastructure
through a single, simple management console.
North America — Version 21 — November 18, 2011
Page 8
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Standard Features
Two versions of Insight Control are available, to serve environments requiring
either a Linux-based or a Windows-based central management server: HP
Insight Control for Linux, and HP Insight Control. See
www.hp.com/go/insightcontrol
HP Insight Dynamics for
ProLiant
HP Insight Control includes one year of 24 x 7 HP Software Technical
Support and Update Service ensuring rapid access to HP support staff and
proactive delivery of software updates. For more information about this
service, please visit: http://www.hp.com/services/insight.
HP Insight Dynamics for ProLiant, a product option, is advanced
infrastructure management software that enables IT staff to instantly adjust
their environments to meet dynamic business demands by provisioning,
optimizing and protecting complex infrastructure in minutes. It's a powerful
toolkit, integrated-by-design, that accelerates complex technology projects
and simplifies daily operations, transforming data center economics. With
Insight Dynamics IT professionals can plan capacity and power continuously,
balance workloads across physical and virtual resources, and ensure costeffective high availability. It also enables IT organizations to provision
infrastructure consistently and automatically from pools of shared resources
using a self-service portal. Resources provisioned can range from a single
virtual machine to complex multi-tier environments and their associated
physical and virtual resource requirements. In addition to the previous
functional benefits, it also provides a cost-effective disaster recovery for
physical and virtual environments that works with HP Continuous Access
software for both the Enterprise Virtual Array and the XP storage array
allowing application environments to be reactivated in minutes with the touch
of a button to a remote location.
NOTE: For more information, visit: http://www.hp.com/go/insightdynamics
High Performance
Clusters
HP Cluster Platforms
HP HPC Interconnects
HP Insight Cluster
Management Utility
DA - 13706
HP Cluster Platforms are specifically engineered, factory-integrated largescale ProLiant clusters optimized for High Performance Computing, with a
choice of servers, networks and software. Operating system options include
specially priced offerings for Red Hat Enterprise Linux and SUSE Linux
Enterprise Server, as well as Microsoft Windows HPC Server. A Cluster
Platform Configurator simplifies ordering. http://www.hp.com/go/clusters
High Performance Computing (HPC) interconnect technologies are available
for this server as part of the HP Cluster Platform portfolio. These high-speed
InfiniBand and Gigabit interconnects are fully supported by HP when
integrated within an HP cluster. Flexible, validated solutions can be defined
with the help of configuration tools.
http://www.hp.com/techservers/clusters/ucp/index.html
HP Insight Cluster Management Utility (CMU) is an HP-licensed and HPsupported suite of tools that are used for lifecycle management of hyperscale
clusters of Linux ProLiant systems. CMU includes software for the centralized
provisioning, management and monitoring of nodes. CMU makes the
administration of clusters user friendly, efficient, and effective.
http://www.hp.com/go/cmu
North America — Version 21 — November 18, 2011
Page 9
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Standard Features
HP HPC Linux Value Pack HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HP-supported
option to HP Insight CMU, for the development and deployment of
applications on HPC Cluster Platforms. Value Pack includes the Platform LSF
workload scheduler and Platform Application Center, as well as the HP-MPI
parallelization library. HP HPC Linux Value Pack
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Oracle Solaris
VMware
Citrix XenServer
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport and our driver download page
http://www.hp.com/support/BL460cG7
Availability
Industry Standard
Compliance
Dual-Port Fibre Channel Mezzanine Card options for redundant SAN connection
Dual-port embedded 10 Gigabit Ethernet adapters for redundant LAN connections
Two (2) hot-plug SAS/SATA hard drive bays and integrated RAID (HP Smart Array P410i
Controller)
Optional Battery-backed and Flash-backed write cache module for integrated RAID controller
Redundant ROM
Advanced ECC Memory
Support for Memory Mirroring Mode and Memory Lock-Step Mode
Support for Memory Online Spare Mode with Xeon 5600 Series processors
Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load
balancing)
ACPI 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support
IMPI 2.0 Compliant
SMASH CLP Compliant
DA - 13706
North America — Version 21 — November 18, 2011
Page 10
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Standard Features
Security
Power-on password
Administrator's password
Keyboard password (QuickLock)
Integrated Lights-Out 3 with:
12 customizable user accounts
SSL encryption
Secure Shell version 2
Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES) on
browser, CLP and XML scripting interface
AES and RC4 encryption of video
Disable via a global setting
Keyboard password
External USB port enable/disable
Network server mode
Serial interface control
TPM (Trusted Platform Module) 1.2 option
Intel® Advanced Encryption Standard-New Instructions (AES-NI) (Intel Xeon 5600 series
processors)
Security - Trusted Platform The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to
Module
authenticate the server platform. These artifacts can include passwords, certificates and encryption keys.
Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature available in Windows
Server® 2008. BitLocker leverages the enhanced security capabilities of a Trusted Platform Module
(TPM) version 1.2. The TPM works with BitLocker to help protect user data and to ensure that a server
running Windows Server 2008 has not been tampered with while the system was offline.
NOTE: For more information about TPM, including a white paper, go to: http://www.hp.com/go/TPM
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained. Misplacing or losing
the key could result in data loss.
Factory Express Portfolio
for Servers and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services on your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express.html
DA - 13706
North America — Version 21 — November 18, 2011
Page 11
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Standard Features
HP Enterprise
Configurator
The HP e-Configure Enterprise Configurator now provides factory default racking for our HP hardware
portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our
valued customers. If you require "custom" rack configuration, please contact HP's Customer Business
Center or an Authorized Partner for assistance. http://www.hp.com/products/configurator
DA - 13706
North America — Version 21 — November 18, 2011
Page 12
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Service and Support
Service and Support
HP Technology Services for Industry Standard Servers and BladeSystem
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who
understands your increasingly complex business technology environment. That's why it makes sense to
team up with the people who know HP infrastructure hardware and software best - the experienced
professionals at HP Services.
What HP ProLiant and BladeSystem Services can do for you
HP ProLiant and BladeSystem Services can help you design, deploy, test, integrate, support, and manage
IT and infrastructure solutions. This way, HP proposes services solutions that include more than just uplift
of base warranty. You can get the support you need by choosing from one of a number of service
packaged solutions we have designed to address wider set of customer support needs.
HP Technology Services meets business challenges with services offered in three packages - Optimized
Care Package, Standard Care Package, and Basic Care Package - available for each product group.
Such packaged solutions enable customers to optimize technology operations, minimize risk and drive
better business outcomes with easy-to-buy, easy-to-use scalable support packages for servers, storage,
networking and software.
Optimized Care Package Supports maintaining servers at optimum performance availability
HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c3000/c7000
enclosure
Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade
enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, PMP and
VPM
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW.pdf
3-Year HP Critical Advantage L3 for c3000/c7000 enclosure + 3-Year HP Critical Advantage L3 for
Blade server
Provides end-to-end infrastructure support solution for business critical applications running on
virtualized/x86 infrastructures, enabling the customers to cost effectively build, operate, and continuously
improve their IT environment
http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA3-1772ENW.pdf
HP Installation and Startup Service for HP BladeSystem c-Class Enhanced Network
HP Provides for the configuration and testing of BladeSystem Ethernet interconnect switches to facilitate
proper implementation of network protocols and access to advanced features.
http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW.pdf
Additional Services:
Services Virtualization Services - Strategy, Design, Transition, Operation, Continual Service
Improvement.
DA - 13706
North America — Version 21 — November 18, 2011
Page 13
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Service and Support
Standard Care Package
Package that maintains high level of server availability
HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c3000/c7000
enclosure
Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade
enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, PMP and
VPM
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW.pdf
HP Installation and Startup Service for HP BladeSystem c-Class Enhanced Network
HP Provides for the configuration and testing of BladeSystem Ethernet interconnect switches to facilitate
proper implementation of network protocols and access to advanced features
http://h20195.www2.hp.com/V2/GetPDF.aspx/4aa0-5969ENW.pdf
3-Year, HP 6 hour Hardware Support Onsite Call-to-Repair Service for c3000/c7000 enclosure + 3Year, HP 6 hour Hardware Support Onsite Call-to-Repair Service for Blade server
Provides an IT manager with a team of support specialists who will quickly begin troubleshooting the
system to help return the hardware to operating condition within 6 hours of the initial service request to
the HP Global Solution Center
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EN.pdf
3-Year , HP 24x7 Software Support for Insight Control
Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL
series servers or HP BladeSystem servers
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf
1-Year HP Proactive Select 30 Credit
Provides a flexible way to purchase HP best-in-class consultancy and technical services
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA2-3842ENN.pdf
Additional Services:
Services Software OS (Microsoft, Linux (SUSE/Red Hat) & VMware Installation & Start Up
and Software Support); Microsoft or Linux or VMware education courses; +60 Proactive Select Credits,
Factory Express.
DA - 13706
North America — Version 21 — November 18, 2011
Page 14
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Service and Support
Basic Care Package
Delivers minimum recommended support service level
HP Installation and Startup Service for HP BladeSystem c-Class Infrastructure for c3000/c7000
enclosure
Provides for the installation and startup of a BladeSystem c3000 Infrastructure in a single blade
enclosure including hardware and software, including deployment of OS, HP SIM, RDP, RDP, PMP and
VPM
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA0-5964ENW.pdf
3-Year, HP 24x7 4 hour Response, Hardware Support Onsite Service for c3000/c7000 enclosure +
3-Year, HP 24x7 4 hour Response, Hardware Support Onsite Service for Blade server
Provides you with rapid remote support and if required an HP authorized representative who will arrive
on site any time and day of the year to begin hardware maintenance service within 4 hours of the service
request being logged
http://h20195.www2.hp.com/V2/GetPDF.aspx/5982-6547EEE.pdf
3-Year , HP 24x7 Software Support for Insight Control
Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL
series servers or HP BladeSystem servers
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf
1-Year HP Proactive Select 10 Credit
Provides a flexible way to purchase HP best-in-class consultancy and technical services
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA2-3842ENN.pdf
Additional Services:
Services Startup Blade System c-Cass Enhanced Network Service; Software OS (Microsoft,
Linux (SUSE/Red Hat) & VMware Installation & Start Up and Software Support); +30 Proactive Select
Credits, Factory Express
Insight Remote Support
The packages include HP Insight Remote Support that uses proven technology to deliver secure, reliable
24x7 remote monitoring, diagnoses, and problem resolution. It is available at no additional cost to all
warranty, HP Care Pack Service, and service agreement customers.
For more information
To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP sales
representative or HP Authorized Channel Partner. Or visit: www.hp.com/services/bladesystem
DA - 13706
North America — Version 21 — November 18, 2011
Page 15
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Models
Models
HP ProLiant BL460c G7 Processor(s)
X5675 1P 12GB-R Server One of the following
637390-B21
depending on Model
HP ProLiant BL460c G7
X5670 1P 12GB-R P410i
Server
603251-B21
HP ProLiant BL460c G7
X5650 1P 6GB-R P410i
Server
603259-B21
HP ProLiant BL460c G7
E5649 1P 6GB-R Server
637391-B21
HP ProLiant BL460c G7
E5640 1P 6GB-R P410i
Server
603569-B21
HP ProLiant BL460c G7
E5620 1P 6GB-R P410i
Server
603588-B21
HP ProLiant BL460c G7
E5506 1P 6GB-R P410i
Server
603591-B21
(1) Intel® Xeon® X5675 (3.06GHz/6-core/12MB/95W, DDR3-1333, HT,
Turbo 2/2/2/2/3/3) Processor
(1) Intel® Xeon® X5670 (2.93GHz/6-core/12MB/95W, DDR3-1333, HT,
Turbo 2/2/2/2/3/3) Processor
(1) Intel® Xeon® X5650 (2.66GHz/6-core/12MB/95W, DDR3-1333, HT,
Turbo 2/2/2/2/3/3) Processor
(1) Intel® Xeon® E5649 (2.53GHz/6-core/12MB/80W, DDR3-1333, HT,
Turbo1/1/1/1/2/2) Processor
(1) Intel® Xeon® E5640 (2.66GHz/4-core/12MB/80W, DDR3-1066, HT,
Turbo 1/1/2/2) Processor
(1) Intel® Xeon® E5620 (2.40GHz/4-core/12MB/80W, DDR3-1066, HT,
Turbo 1/1/2/2) Processor
(1) Intel® Xeon® E5506 (2.13GHz/4-core/4MB/80W, DDR3-800)
Processor
(1) Intel® Xeon® L5640 (2.26GHz/6-core/12MB/60W, DDR3-1333, HT,
Turbo 2/2/3/3/4/4) Processor
Cache Memory
4MB or 12MB shared L3 cache
Memory
One of the following
depending on Model
12 GB (3 x 4 GB) PC3-10600 (DDR3-1333) Registered DIMMs
6 GB (3 x 2 GB) PC3-10600 (DDR3-1333) Registered DIMMs
12GB (3 x 4 GB) PC3L-10600 (DDR3-1333) Low Voltage Registered DIMMs
Network Adapter
Embedded NC553i Dual Port FlexFabric 10Gb Adapter and one (1)
additional 10/100 server adapter dedicated to iLO 3 Management
Storage Controller
HP Smart Array P410i Controller with no cache supporting RAID 0 and 1
Hard Drives
None ship standard
Internal Storage
Two hot plug SFF drive bays
Optical Drive
None
Form Factor
Up to eight (8) half-height blades supported in the HP BladeSystem c3000
Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem c7000
Enclosure
HP ProLiant BL460c G7
L5640 1P 12GB-L P410i
Server
603256-B21
DA - 13706
North America — Version 21 — November 18, 2011
Page 16
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Smart Buys
HP BL460c G7 X5650 2P Processor(s)
16GB-R US Svr/S-Buy
630442-S01
Memory
Network Adapter
Storage Controller
Hard Drives
Form Factor
HP BL460c G7 E5649
12G 1P Svr/S-Buy
644568-S01
Processor(s)
Memory
Network Adapter
Storage Controller
Hard Drives
Form Factor
DA - 13706
(2) HP BL460c G7 X5650 (2.66 GHz, 12MB L3 Cache, 95W, DDR3-1333,
HT, Turbo 2/2/2/2/3/3)
16GB (2x 8GB PC3-10600 (DDR3-1333) Registered CAS-9)
Embedded NC553i Dual Port FlexFabric 10Gb Converged Network Adapter
supporting stateless TCP/IP offload, TCP Offload Engine (TOE), Fibre
Channel over Ethernet (FCoE) and iSCSI protocols
HP Smart Array P410i/ZM Controller (RAID 0/1)
None included, supports up to two (2) small form factor (SFF) SAS or SATA
hot plug hard disk drives
Half-height server blade
(1) Intel® Xeon® E5649 (2.53GHz/6-core/12MB/80W)
12GB (3x 4GB PC3-10600 (DDR3-1333) Registered CAS-9)
Embedded NC553i Dual Port FlexFabric 10Gb Converged Network Adapter
supporting stateless TCP/IP offload, TCP Offload Engine (TOE), Fibre
Channel over Ethernet (FCoE) and iSCSI protocols
HP Smart Array P410i/ZM Controller (RAID 0/1)
None included, supports up to two (2) small form factor (SFF) SAS or SATA
hot plug hard disk drives
Half-height server blade
North America — Version 21 — November 18, 2011
Page 17
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order server blades must start with a CTO Blade.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models
HP ProLiant BL460c G7 Configure-to-order Server
Configurable Model ships with:
Integrated NC553i Dual Port FlexFabric 10Gb Adapter and one (1) additional
10/100 server adapter dedicated to iLO 3 management
Smart Array P410i Controller with no cache supporting RAID 0 and 1
Integrated Lights-Out 3 Standard Blade Edition
603718-B21
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
HP Processors
For single processor configuration choose:
Six-Core Processor Option Kits
NOTE: If two processors are desired, select one xxxxxx-L21 and one xxxxxx-B21.
HP BL460c G7 Intel® Xeon® X5675 (3.06GHz/6-core/12MB/95W) FIO Processor
Kit
HP BL460c G7 Intel® Xeon® X5670 (2.93GHz/6-core/12MB/95W) FIO Processor
Kit
HP BL460c G7 Intel® Xeon® X5660 (2.80GHz/6-core/12MB/95W) FIO Processor
Kit
HP BL460c G7 Intel® Xeon® X5650 (2.66GHz/6-core/12MB/95W) FIO Processor
Kit
HP BL460c G7 Intel® Xeon® E5649 (2.53GHz/6-core/12MB/80W) FIO Processor
Kit
HP BL460c G7 Intel® Xeon® E5645 (2.40GHz/6-core/12MB/80W) FIO Processor
Kit
HP BL460c G7 Intel® Xeon® L5640 (2.26GHz/6-core/12MB/60W) FIO Processor
Kit
Four-Core Processor Option Kits
HP BL460c G7 Intel® Xeon® X5672 (3.20GHz/4-core/12MB/95W) FIO Processor
Kit
HP BL460c G7 Intel® Xeon® X5667 (3.06GHz/4-core/12MB/95W) FIO Processor
Kit
HP BL460c G7 Intel® Xeon® L5630 (2.13GHz/4-core/12MB/40W) FIO Processor
Kit
HP BL460c G7 Intel® Xeon® L5520 (2.26GHz/4-core/8MB/60W)FIO Processor
Option Kit
HP BL460c G7 Intel® Xeon® E5640 (2.66GHz/4-core/12MB/80W) FIO Processor
Kit
DA - 13706
North America — Version 21 — November 18, 2011
637406-L21
610859-L21
603254-L21
610860-L21
637410-L21
637412-L21
610863-L21
637408-L21
626902-L21
603574-L21
641568-L21
610861-L21
Page 18
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Configuration Information - Factory Integrated Models
HP Memory
HP BL460c G7 Intel® Xeon® E5630 (2.53GHz/4-core/12MB/80W) FIO Processor
Kit
HP BL460c G7 Intel® Xeon® E5620 (2.40GHz/4-core/12MB/80W) FIO Processor
Kit
HP BL460c G7 Intel® Xeon® E5506 (2.13GHz/4-core/4MB/80W) FIO Processor Kit
HP BL460c G7 Intel® Xeon® E5607 (2.26GHz/4-core/8MB/80W) FIO Processor Kit
Two-Core Processor Option Kits
HP BL460c G7 Intel® Xeon® E5503 (2.0GHz/2-core/4MB/80W) FIO Processor Kit
Registered DIMMS (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 LP
Memory Kit
HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7 LP
Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: PC3L is low voltage memory.
DA - 13706
North America — Version 21 — November 18, 2011
610862-L21
612127-L21
610864-L21
637414-L21
612890-L21
500656-B21
500658-B21
593339-B21
604504-B21
500662-B21
604506-B21
500666-B21
627812-B21
627814-B21
500668-B21
500670-B21
500672-B21
Page 19
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Configuration Information - Factory Integrated Models
Step 3: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below. For additional options,
including server blade enclosures interconnect, mezzanine options and power subsystem options; please see the Core Options and
Additional sections below; or the following:
HP BladeSystem c-Class Enclosures QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_na/12790_na.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_na/12810_na.html
and HP BladeSystem c-Class Interconnect and Mezzanine Components:
http://h18004.www1.hp.com/products/blades/components/c-class-interconnects.html
http://h18004.www1.hp.com/products/blades/components/c-class-adapters.html
DA - 13706
North America — Version 21 — November 18, 2011
Page 20
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Core Options
HP Ethernet Mezzanine
Options
HP Fiber Channel
Mezzanine Options
Gigabit Ethernet Mezzanines
HP NC325m PCI Express Quad Port Gigabit Server Adapter
NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server,
connectivity will be provided on 2 of the 4 ports.
HP NC364m Quad Port 1GbE BL-c Adapter
NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server,
connectivity will be provided on only 2 of the 4 ports.
HP NC382m PCI Express Dual Port Multifunction Gigabit Server Adapter
NOTE: The Gigabit Ethernet adapters above transmit from the server at 2000 Mbps,
full duplex per port only. For more information, see the "Network Controller" segment
in the Standards Features section.
416585-B21
447883-B21
453246-B21
10 Gigabit Ethernet Mezzanines
NOTE: A 10 Gigabit Ethernet adapter is required for each server blade connecting to
a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 2-4 (HP
BladeSystem c3000 Enclosure).
NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of server
memory.
NOTE: Each 10 Gigabit Either adapter supports linking at 1000Mbps or 10000Mbps
when not connected to a Flex-10 enabled module and will link with all current 1Gb
switches at 1Gb.
NOTE: The ROM Based Setup Utility (RBSU) feature allows for the configuring of a
FlexFabric Adapter to any of the supported protocols. For example iSCSI to FCoE
(Fibre Channel over Ethernet). Note that a HP Virtual Connect profile takes
precedence over the setting in this menu. Also, some FlexFabric Adapters may require
that network boot be enabled in order to configure the protocol. If the protocol is
configured without enabling network boot with certain FlexFabric Adapters, the
protocol may not take effect. Once the protocol has taken effect on the first boot after
configuring this option, network boot may be disabled if desired.
HP NC532m Dual Port 10GbE Multifunction BL-c Adapter
HP NC542m Dual Port Flex-10 10GbE BL-c Adapter
HP NC552m 10Gb 2-port Flex-10 Ethernet Adapter
HP NC553m 10Gb 2-port FlexFabric Adapter
467799-B21
539857-B21
610609-B21
613431-B21
HP BLc Brocade 804 8Gb Fibre Channel Host Bus Adapter
Emulex LPe1205 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
590647-B21
456972-B21
403621-B21
451871-B21
403619-B21
DA - 13706
North America — Version 21 — November 18, 2011
Page 21
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Core Options
HP Processors
Six-Core Processor Option Kits
HP BL460c G7 Intel® Xeon® X5675 (3.06GHz/6-core/12MB/95W) Processor Kit
HP BL460c G7 Intel® Xeon® X5670 (2.93GHz/6-core/12MB/95W) Processor Kit
HP BL460c G7 Intel® Xeon® X5660 (2.80GHz/6-core/12MB/95W) Processor Kit
HP BL460c G7 Intel® Xeon® X5650 (2.66GHz/6-core/12MB/95W) Processor Kit
HP BL460c G7 Intel® Xeon® E5649 (2.53GHz/6-core/12MB/80W) Processor Kit
HP BL460c G7 Intel® Xeon® E5645 (2.40GHz/6-core/12MB/80W) Processor Kit
HP BL460c G7 Intel® Xeon® L5640 (2.26GHz/6-core/12MB/60W) Processor Kit
Four-Core Processor Option Kits
HP BL460c G7 Intel® Xeon® X5672 (3.20GHz/4-core/12MB/95W) Processor Kit
HP BL460c G7 Intel® Xeon® X5667 (3.06GHz/4-core/12MB/95W) Processor Kit
HP BL460c G7 Intel® Xeon® L5630 (2.13GHz/4-core/12MB/40W) Processor Kit
HP BL460c G7 Intel® Xeon® L5520 (2.26GHz/4-core/8MB/60W) Processor Kit
HP BL460c G7 Intel® Xeon® E5640 (2.66GHz/4-core/12MB/80W) Processor Kit
HP BL460c G7 Intel® Xeon® E5630 (2.53GHz/4-core/12MB/80W) Processor Kit
HP BL460c G7 Intel® Xeon® E5620 (2.40GHz/4-core/12MB/80W) Processor Kit
HP BL460c G7 Intel® Xeon® E5607 (2.26GHz/4-core/8MB/80W) Processor Kit
HP BL460c G7 Intel® Xeon® E5506 (2.13GHz/4-core/4MB/80W) Processor Kit
Two-Core Processor Option Kits
HP BL460c G7 Intel® Xeon® E5503 (2.0GHz/2-core/4MB/80W) Processor Kit
HP Memory
Registered DIMMS (RDIMMs)
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP S-Buy 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP S-Buy 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP S-Buy 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
DA - 13706
North America — Version 21 — November 18, 2011
637406-B21
610859-B21
603254-B21
610860-B21
637410-B21
637412-B21
610863-B21
637408-B21
626902-B21
603574-B21
641568-B21
610861-B21
610862-B21
612127-B21
637414-B21
610864-B21
612890-B21
500656-B21
500656-S21
500658-B21
500658-S21
593339-B21
604504-B21
500662-B21
500662-S21
604506-B21
627812-B21
Page 22
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Core Options
HP Hard Drives
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
HP S-Buy 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7 LP
Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
500666-B21
HP S-Buy 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit S-Buy
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see:
http://h18004.www1.hp.com/products/servers/platforms/energyefficient/
NOTE: PC3L is a low voltage memory.
500670-S21
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller,
firmware, and the server backplane) should operate at the same data transfer rate or
the system bandwidth will be negotiated down to an acceptable level for all
components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific
hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive S-Buy
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive S-Buy
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP S-Buy 300GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
DA - 13706
North America — Version 21 — November 18, 2011
500666-S21
627814-B21
500668-B21
500670-B21
500672-B21
500672-S21
619291-B21
619291-S21
581286-B21
581286-S21
581284-B21
507127-B21
507127-S21
Page 23
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Core Options
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) Hot Plug Enterprise 3 yr Warranty Hard
Drive
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) Hot Plug Enterprise 3 yr Warranty Hard
Drive S-Buy
HP 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
HP S-Buy 146GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP S-Buy 146GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty
Hard Drive
HP 72GB 6G SAS 15K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard
Drive
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive
HP 1TB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard Drive
S-Buy
HP 500GB 6G SAS 7.2K rpm SFF (2.5-inch) Dual Port Midline 1yr Warranty Hard
Drive
NOTE: Please see QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12244_na/12244_na.html
NOTE: The hard drive options are not required when configuring a Drive-less Model.
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 3G SATA 7.2K rpm SFF (2.5-inch) Hot Plug Midline 1yr Warranty Hard Drive
HP 1TB 3G SATA 7.2K rpm SFF (2.5-inch) Hot Plug Midline 1yr Warranty Hard Drive
S-Buy
HP 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive
HP S-Buy 500GB 3G SATA 7.2K rpm SFF (2.5-inch) Midline 1yr Warranty Hard Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13121_na/13121_na.html
SATA Hot Plug 2.5" Enterprise Mainstream Solid State Drives
HP 400GB 3G SATA MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid
State Drive
HP 200GB 3G SATA MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid
State Drive
HP 120GB 3G SATA SFF (2.5-inch) Midline 1yr Warranty Solid State Drive
HP 100GB 3G SATA MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid
State Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13145_na/13145_na.html
6G SAS Hot Plug Enterprise Performance Solid State Drives
HP 400GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty Solid
State Drive
DA - 13706
North America — Version 21 — November 18, 2011
627117-B21
627117-S21
512547-B21
512547-S21
507125-S21
512545-B21
605835-B21
605835-S21
507610-B21
625609-B21
625609-S21
507750-B21
507750-S21
636597-B21
636595-B21
572073-B21
636593-B21
632494-B21
Page 24
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Core Options
HP 200GB 6G SAS SLC SFF (2.5-inch) Enterprise Performance 3yr Warranty Solid
State Drive
6G SAS Hot Plug Enterprise Mainstream Solid State Drives
HP 800GB 6G SAS MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid
State Drive
HP 400GB 6G SAS MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid
State Drive
HP 200GB 6G SAS MLC SFF (2.5-inch) Enterprise Mainstream 3yr Warranty Solid
State Drive
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13121_ns/13121_na.html
DA - 13706
North America — Version 21 — November 18, 2011
632492-B21
632506-B21
632504-B21
632502-B21
Page 25
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Additional Options
HP Insight software
HP Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic
License
HP S-Buy Insight Control including 1yr 24x7 Technical Support and Updates
Electronic License
HP Insight Control including 1yr 24x7 Technical Support and Updates Single Server
License
HP S-Buy Insight Control, Single-Server License including 1 year of 24x7 Technical
Support and Updates
HP Insight Software Media Kit
NOTE: Insight Software DVD media without licenses. Contains Insight Control, Insight
Dynamics and Virtual Connect Enterprise Manager. Uses an integrated installer to
perform quick and accurate software installation and updates.
NOTE: Licenses ship without media. The HP Insight Control Media Kit can be ordered
separately, or can be downloaded at: http://www.hp.com/go/insightupdates.
NOTE: Electronic licenses can be used to purchase multiple licenses with a single
activation key.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HP Software Technical Support & Update Service.
NOTE: For additional license kits, including bundles with HP BladeSystem enclosures,
please see the Insight Control QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12631_na/12631_na.html
HP Insight Control for Linux
HP Insight Control for Linux including 1yr 24x7 Support Electronic License
HP S-Buy Insight Control for Linux including 1yr 24x7 Support Electronic License
NOTE: This part number can be purchased as a single license or as multiple licenses
with a single activation key. Customer will receive a license entitlement certificate via
e-mail. The license entitlement certificate must be redeemed online or via fax in order
to obtain the license activation key(s). Includes one year of 24 x 7 HP Software
Technical Support and Update Service.
HP Insight Control for Linux including 1yr 24x7 Support Single Server License
HP Insight Control for Linux Media Kit
NOTE: This optional Media pack DVD contains the ISO image for HP Insight Control
for Linux, HP Systems Insight Manager, HP Insight Control power management, HP
Insight Control virtual machine management, and an integrated installer. Servers must
be acquired separately.
NOTE: This Media pack is optional because the latest ISO image and latest updates
may be downloaded at no cost from: http://www.hp.com/go/ic-linux (click on
Download button).
NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux can be
ordered separately, or can be downloaded at: http://www.hp.com/go/ic-linux (click
on Download button).
NOTE: Electronic licenses can be used to purchase multiple licenses with a single
activation key.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
DA - 13706
North America — Version 21 — November 18, 2011
T9074BAE
T9074ASE
452148-B22
452148-S22
436222-B21
TC213AAE
TC213ASE
TC209A
TC208A
Page 26
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Additional Options
one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional License Kits, including electronic licensing options, please see
the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/13019_na/13019_na.html
HP Integrated Lights-Out (iLO) Advanced for ProLiant BladeSystem Remote
Management
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Electronic License
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Single Server License
NOTE: Electronic licenses can be used to purchase multiple licenses with a single
activation key.
NOTE: Customer will receive a license entitlement certificate, which must be
redeemed online or via fax in order to obtain the license activation key(s). Includes
one year of 24 x 7 HP Software Technical Support Service.
NOTE: For additional license kits please see the HP Integrated Lights-Out (iLO)
QuickSpecs at: www.hp.com/go/iLO.
High Performance
Clusters
HP Security - TPM
HP Cluster Management Utility
HP Cluster Management Utility Flexible License
NOTE: This part number can be used to purchase one certificate for multiple licenses
with a single activation key. Each license is for one node (server). Customer will
receive a printed end user license agreement and license entitlement certificate via
physical shipment. The license entitlement certificate must be redeemed online in
order to obtain a license key.
HP Cluster Management Utility Media
NOTE: Order a minimum of one license per cluster to purchase media including
software and documentation, which will be delivered to the customer, and also
licenses CMU management. No license key is delivered or required.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/12612_na/12612_na.html
HP HPC Linux Value Pack
HP High Performance Computing Linux Value Pack 1 Processor Flexible License
NOTE: This part number can be used to purchase one certificate for multiple licenses
with a single activation key. Each license is for one socket (a.k.a. processor).
Customer will receive a printed end user license agreement and license entitlement
certificate via physical shipment. The license entitlement certificate must be redeemed
online in order to obtain a license key.
HP High Performance Computing Linux Value Pack Media Kit
NOTE: This part number can be used to purchase media including software and
documentation, which will be delivered to the customer.
NOTE: For additional license kits please see the QuickSpecs at:
http://h18004.www1.hp.com/products/quickspecs/13485_na/13485_na.html
HP Trusted Platform Module Option
NOTE: The TPM key is unique to every TPM deployed server and must be retained.
Misplacing or losing the key could result in data loss.
DA - 13706
North America — Version 21 — November 18, 2011
TA851AAE
512488-B21
QL803A
433257-B21
TC293B
TC294A
488069-B21
Page 27
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Additional Options
HP Storage Controllers
HP Smart Array P700m Controller
HP Smart Array P700m/512 4-ports Ext PCIe x8 SAS Controller
HP Smart Array P700m/256 4-ports Ext PCIe x8 SAS Controller
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13175_na/13175_na.html
HP Smart Array P711m Controller
HP Smart Array P711m/1G 6Gb FBWC 4-ports Ext Mezzanine SAS Controller
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18004.www1.hp.com/products/quickspecs/14035_na/14035_na.html
HP Smart Array P712M Controller
HP Smart Array P712m/256 6Gb 2-ports Int/2-ports Ext Mezzanine SAS Controller
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13296_na/13296_na.html
Optional Upgrades
HP Smart Array P-Series Low Profile Battery
NOTE: The Smart Array Low Profile Battery supports the HP Smart Array P700m
Controller.
NOTE: The Smart Array battery option kit is required to enable battery-backed write
cache (BBWC).
NOTE: The options listed below supports the integrated HP Smart Array P410i.
HP 256MB P-series Cache Upgrade
HP 512MB Flash Backed Write Cache
HP 1GB Flash Backed Cache
HP Smart Array Advanced Pack including 1yr 24x7 Technical Support and Updates
Single Server License
NOTE: A license key, a minimum of 256MB cache, and battery kit is required to
enable Smart Array Advanced Pack features. For more information go to:
http://www.hp.com/go/saap
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13201_na/13201_na.html
HP I/O Expansion
Options
HP 320GB IO Accelerator for BladeSystem c-Class
HP 640GB IO Accelerator for BladeSystem c-Class
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13220_na/13220_na.html
DA - 13706
North America — Version 21 — November 18, 2011
508226-B21
507925-B21
513778-B21
488348-B21
452348-B21
462968-B21
534916-B21
534562-B21
516471-B21
AJ878B
BK836A
Page 28
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Additional Options
HP c-Class Mezzanine
Options
HP 4X QDR QLogic InfiniBand Dual Port Mezzanine HCA for c-Class BladeSystem
HP 4X QDR InfiniBand ConnectX-2 Dual Port Mezzanine HCA for c-Class
BladeSystem
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12586_na/12586_na.html
HP Ultrium Tape Blades
HP LTO-4 SB1760c Tape Blade
NOTE: LTO-4 Ultrium tape technology.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12729_na/12729_na.html
HP Storage Blades
HP LTO-5 SB3000c Tape Blade
NOTE: Please see the for Technical Specifications and additional information at:
http://h18000.www1.hp.com/products/quickspecs/12729_na/12729_na.html
HP SB40c Storage Blade
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12587_na/12587_na.html
HP D2200sb Storage Blade
NOTE: Please see the HP D2200sb PCIe Storage Blade QuickSpecs for technical
specifications and additional information at:
http://h18006.www1.hp.com/storage/bladesystem/index.html.
HP Expansion Blade
HP BLc PCI Expansion Blade
NOTE: Ships with one pre-installed PCI-X connect board. Also includes one PCIe
connect board which requires installation.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12753_na/12753_na.html
DA - 13706
North America — Version 21 — November 18, 2011
583210-B21
592519-B21
AQ697A
BS580A
411243-B21
AP880A
448018-B21
Page 29
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Additional Options
HP USB and SD Options HP USB 2-Button Optical Scroll Mouse
HP USB Standard Keyboard
HP 2GB USB Flash Media Drive Key Kit
NOTE: HP qualified blank USB key for use with HP ProLiant servers that support the
VMware virtualization environment and other HP value-add software like Smartstart.
HP recommends this industry standard USB flash device for use with VMware ESXi.
USB device must be installed in the internal slot of the ProLiant server for use with
VMware ESXi. Refer to HP VMware Getting Started Guide for installation instructions.
HP 4GB Secure Digital High Capacity Flash Media Kit
NOTE: Blank SD media devices are supported for use with VMware and Citrix. SD
media must be installed in the internal slot of the ProLiant server. Learn more at:
http://www.hp.com/go/proliantvirtualization
HP Care Pack Services
Smart Buy Care Pack
Services
NOTE: The HP Care Pack service part numbers below for ProLiant BL c-Class server
blades, cover the server blade and all HP branded hardware options qualified for the
server, purchased at the same time or afterwards, internal to the server.
Hardware Services On-site Service
HP 3 year 4 hour 13x5 BL4xxc Server Blade Hardware Support
HP 3 year 4 hour 24x7 BL4xxc Server Blade Hardware Support
HP 3 year 6 hour 24x7 Call to Repair BL4xxc Server Blade Hardware Support
NOTE: The HP Care Pack service part numbers below for ProLiant BL c-Class server
blades, cover the server blade and all HP branded hardware options qualified for the
server, purchased at the same time or afterwards, internal to the server.
Hardware Services On-site Service
S-Buy 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
S-Buy 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
S-Buy 6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
HP SBuy3y24x7 24hCTRBL4xxc Svr Bld HWSup
DA - 13706
North America — Version 21 — November 18, 2011
DC172B
DT528A#ABA
608447-B21
580387-B21
UK065E
UK066E
UK067E
UH959E
UH960E
UM366E
HZ765E
Page 30
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Memory
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Memory Population Guidelines
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
Some DIMM installation guidelines are summarized below:
For the HP ProLiant BL460c G7 server with twelve (12) memory slots:
There are three (3) channels per processor; six (6) channels per server
There are two (2) DIMM slots for each memory channel; twelve (12) total slots.
Memory channel 1 consists of the two (2) DIMMs that are closest to the processor
Memory channel 3 consists of the two (2) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix unbuffered memory (UDIMMs) with registered memory (RDIMMs).
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a two processor system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor
For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots
will be 1,4; 2,5 on the BL460c G7
Low Voltage DIMMs can only be used with Intel Xeon 5600 series processors.
If mixing DIMM voltage is a requirement, please note that the DIMMs will run at 1.5V since all 1.35V are capable of
supporting 1.5V operations
DIMM slot/capacity/populated speed table
DIMM Type
Unbuffered with ECC
DIMMs (UDIMMs)
Single
Rank
Quad Rank (4R) (1R)
Dual Rank (2R)
16GB 16GB 32 GB 1GB
2GB
4GB
1333 1066 1066 1333 1333 1333
LV/Std
Std
LV/Std
Std
Std
Std
Registered DIMMS (RDIMMs)
DIMM Rank
DIMM Capacity
DIMM Native Speed (MHz)
DIMM Voltage
SLOTS THAT CAN BE POPULATED
12 slot servers
Single
Rank
(1R)
4GB
1333
LV/Std
2GB
1333
Std
12
12
12
12
12
12
12
12
12
12
48
24
48
96
192
192
384
12
24
48
Dual Rank (2R)
4GB
8GB
1333 1333
Std
LV/Std
MAXIMUM CAPACITY (GB)
POPULATED DIMM SPEED (MHz)
1 DIMM Per Channel
1333 1333 1333 1333 1333 1066 1066 1333 1333 1333
1066/
1066/ 1066/
1333 1333
800
800
1333 1333 1333
2 DIMM Per Channel
1333
1333* 1333*
NOTE: *By default, low voltage (LV) DIMMs will operate at standard voltage (1.5V) and operate at 1333MHz in a 2 DIMM per
channel configuration. For power savings, this behavior can be changed in RBSU to operate at low voltage (1.35V) and 1066MHz.
DA - 13706
North America — Version 21 — November 18, 2011
Page 31
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Memory
NOTES:
PC3-10600 DIMMs have a maximum speed of 1333MHz.
PC3-8500 DIMMs have a maximum speed of 1066MHz.
Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities
If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the
slower DIMM is on the other processor
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, the maximum speed will be 1066MHz
If you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM per channel in each of the other
channels, the maximum speed will be 1066MHz
Maximum memory speed will also depend on the processor installed
References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.
HP ProLiant BL460c G7 Server Blade DIMM slot and configuration diagrams
Basic memory slot and population diagram
Population order; start with "A" first, "B" second, "C" third, etc.
12 DIMM SLOTS (6 per CPU node)
Channel 1
slot #
1
2
CPU1
population order
D
A
slot #
1
2
CPU2
population order
D
A
Channel 1
Channel 2
3
4
E
B
3
4
E
B
Channel 2
Channel 3
5
6
F
C
5
6
F
C
Channel 3
HP ProLiant BL460c G7 Server Blade (1P Model)
Standard memory configuration (1 CPU model)
6GB (3 x 2GB) of PC3-10600 (DDR3-1333) RDIMMs
Channel 1
slot #
1
2
CPU1
population order
D: empty
A: 2GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Channel 1
Channel 2
3
4
E: empty
B: 2GB DIMM
3
4
E: empty
B: empty
Channel 2
Channel 3
5
6
F: empty
C: 2GB DIMM
5
6
F: empty
C: empty
Channel 3
Standard Memory Plus Optional Memory (1 CPU model)
30 GB of PC3-10600 (DDR3-1333) RDIMMs (3 x 2GB plus 3 x 8GB)
DA - 13706
North America — Version 21 — November 18, 2011
Page 32
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Memory
Channel 1
slot #
1
2
CPU1
population order
D: 2GB DIMM
A: 8GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Channel 1
Channel 2
3
4
E: 2GB DIMM
B: 8GB DIMM
3
4
E: empty
B: empty
Channel 2
Channel 3
5
6
F: 2GB DIMM
C: 8GB DIMM
5
6
F: empty
C: empty
Channel 3
Standard Memory Replaced with Optional Memory (1 CPU model)
96GB of PC3-8500 Quad-Rank RDIMMs (6 x 16GB)
Channel 1
slot #
1
2
CPU1
population order
D: 16GB DIMM
A: 16GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Channel 1
Channel 2
3
4
E: 16GB DIMM
B: 16GB DIMM
3
4
E: empty
B: empty
Channel 2
Channel 3
5
6
F: 16GB DIMM
C: 16GB DIMM
5
6
F: empty
C: empty
Channel 3
UDIMM maximum configuration (1 CPU model)
24GB, consisting of six (6) 4GB dual-rank PC3-10600 UDIMMs
Channel 1
slot #
1
2
CPU1
population order
D: 4GB DIMM
A: 4GB DIMM
slot #
1
2
CPU2
population order
D: empty
A: empty
Channel 1
Channel 2
3
4
E: 4GB DIMM
B: 4GB DIMM
3
4
E: empty
B: empty
Channel 2
Channel 3
5
6
F: 4GB DIMM
C: 4GB DIMM
5
6
F: empty
C: empty
Channel 3
Standard Memory Replaced with Optional Memory (2 CPU Model)
RDIMM maximum configuration
384GB, consisting of twelve (12) 32GB quad-rank PC3-8500 RDIMMs
DA - 13706
North America — Version 21 — November 18, 2011
Page 33
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Memory
Channel 1
slot #
1
2
CPU1
population order
D: 32GB DIMM
A: 32GB DIMM
slot #
1
2
CPU2
population order
D: 32GB DIMM
A: 32GB DIMM
Channel 1
Channel 2
3
4
E: 32GB DIMM
B: 32GB DIMM
3
4
E: 32GB DIMM
B: 32GB DIMM
Channel 2
Channel 3
5
6
F: 32GB DIMM
C: 32GB DIMM
5
6
F: 32GB DIMM
C: 32GB DIMM
Channel 3
UDIMM maximum configuration (2 CPU model)
48GB, consisting of twelve (12) 4GB dual-rank PC3-10600 UDIMMs
Channel 1
slot #
1
2
CPU1
population order
D: 4GB DIMM
A: 4GB DIMM
slot #
1
2
CPU2
population order
D: 4GB DIMM
A: 4GB DIMM
Channel 1
Channel 2
3
4
E: 4GB DIMM
B: 4GB DIMM
3
4
E: 4GB DIMM
B: 4GB DIMM
Channel 2
Channel 3
5
6
F: 4GB DIMM
C: 4GB DIMM
5
6
F: 4GB DIMM
C: 4GB DIMM
Channel 3
NOTE: Capacity references are rounded to the common Gigabyte values.
1GB = 1024MB
2GB = 2048MB
4GB = 4096MB
8GB = 8192MB
16GB = 16384MB
32GB = 32768MB
DA - 13706
North America — Version 21 — November 18, 2011
Page 34
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Memory
Following are memory options available from HP:
Registered DIMMs (RDIMMs)
HP Memory
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 4GB (1x4GB) Single Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9
Memory Kit
HP 4GB (1x4GB) Single Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
HP 8GB (1x8GB) Dual Rank x4 PC3-10600 (DDR3-1333) Registered CAS-9 Memory
Kit
HP 8GB (1x8GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 Low
Power Memory Kit
HP 16GB (1x16GB) Dual Rank x4 PC3L-10600 (DDR3-1333) Registered CAS-9 LP
Memory Kit
HP 16GB (1x16GB) Quad Rank x4 PC3-8500 (DDR3-1066) Registered CAS-7
Memory Kit
HP 32GB (1x32GB) Quad Rank x4 PC3L-8500 (DDR3-1066) Registered CAS-7 LP
Memory Kit
Unbuffered with ECC DIMMs (UDIMMs)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: PC3L is a low voltage memory.
DA - 13706
North America — Version 21 — November 18, 2011
500656-B21
500658-B21
593339-B21
604504-B21
500662-B21
604506-B21
627812-B21
500666-B21
627814-B21
500668-B21
500670-B21
500672-B21
Page 35
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Storage
1-2
2 x SFF hot-plug SAS, SATA, SAS SDD, and SATA SSD
hard drives
Hard Drives
NOTE: The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should
operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
NOTE: Hard drives have either a one year or three year warranty; refer to the specific hard drive QuickSpecs for details.
SAS Hot Plug SFF (2.5-inch) Enterprise (ENT) Drives
Quantity
Position
Supported
Supported
Controller
900GB 6G SAS 10K
2
1-2
HP Smart Array P410i Controller
600GB 6G SAS 10K
450GB 6G SAS 10K
300GB 6G SAS 10K
300GB 6G SAS 15K
146GB 6G SAS 15K
72GB 6G SAS 15K
SAS Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported
1TB 6G SAS 7.2K
2
1-2
500GB 3G SAS 7.2K
SATA Hot Plug SFF (2.5-inch) Midline (MDL) Drives
Quantity
Position
Supported
Supported
1TB 3G SATA 7.2K
2
1-2
500GB 3G SATA 7.2K
160GB 3G SATA 7.2K
SAS Hot Plug Enterprise Performance Solid State Drives
Quantity
Position
Supported
Supported
400GB 6G SAS SLC
2
1-2
200GB 6G SAS SLC
DA - 13706
Controller
HP Smart Array P410i Controller
Controller
HP Smart Array P410i Controller
Controller
HP Smart Array P410i Controller
North America — Version 21 — November 18, 2011
Page 36
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Storage
SAS Hot Plug Enterprise Mainstream Solid State Drives
Quantity
Position
Supported
Supported
800GB 6G SAS MLC
2
1-2
400GB 6G SAS MLC
200GB 6G SAS MLC
SATA Hot Plug 2.5" Enterprise Mainstream Solid State Drives
Quantity
Position
Supported
Supported
400GB 3G SATA MLC
SFF
200GB 3G SATA MLC
SFF
100GB 3G SATA MLC
SFF
2
1-2
Controller
HP Smart Array P410i Controller
Controller
HP Smart Array P410i Controller
External Storage
Quantity
Position
Supported
Host Controller or Adapter
Supported
Enterprise Virtual Array
Please see the XP
External
Please see the XP Disk Array Systems Quick Specs for the latest list
Systems
Disk Array
of supported HBAs
Systems
QuickSpecs
below to
determine
configuration
requirements
HP Enterprise Virtual Array Family:
http://h18006.www1.hp.com/products/quickspecs/12408_na/12408_na.html
DA - 13706
North America — Version 21 — November 18, 2011
Page 37
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Technical Specifications
System Unit
Dimensions (H x W x D)
(with bezel)
Weight
(approximate)
Power Specifications
7.154 x 2.19 x 20.058 in (18.17 x 5.56 x 50.95 cm)
Maximum
16.5 lb (7.5 kg)
(all hard drives and
processors installed)
Minimum
11.50 lb (5.22 kg)
(one hard drive and
processor installed)
For power specifications including Input Requirements, BTU Rating, and
Power Supply Output, please see the HP BladeSystem c-Class Enclosures
QuickSpecs located at URL:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_na/
12790_na.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_na/
12810_na.html
To review typical system power ratings use the HP BladeSystem Power Sizer
which is available via the online tool located at URL:
http://www.hp.com/go/bladesystem/powercalculator
System Inlet Temperature Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
Relative Humidity
(non-condensing)
Altitude
Acoustic Noise
DA - 13706
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, noncondensing.
Non-operating
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature, noncondensing.
Operating
3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
For acoustic noise specifications, please see the HP BladeSystem c-Class
Enclosures QuickSpecs located at URL:
North America — Version 21 — November 18, 2011
Page 38
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Technical Specifications
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_na/
12790_na.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_na/
12810_na.html
HP Smart Array P410i
Controller
Disk Drive Interface
6Gb/s SAS (Serial Attached SCSI)
3Gb/s SATA (Serial ATA)
Server Interface
x4 PCI Express host interface
Cache Memory
0 MB (none) standard
Optional 256MB, 512MB, or 1GB cache memory
Logical Drives Supported 2 (with standard 0MB cache)
Maximum Logical Drive 32 (with optional 256MB cache)
Capacity
64 (with optional 512MB cache)
Host Memory Addressing 64-bit, supporting servers memory space greater than 4 GB
RAID 1( Mirroring)
RAID Support
RAID 0 (Striping)
Upgradeable Firmware
Controller: Upgradeable Firmware with Recovery ROM feature
Online Drive Flash (with SAS drives) requires 256MB, 512MB, or 1GB cache
module
Embedded HP NC553i
Dual Port FlexFabric
10Gb Adapter
Type
Network Processor
Data Transfer Method
Network Transfer Rate
IEEE Compliance
Standard Features
HP Integrated Lights-Out Architecture
3 (iLO 3)
Processor
integrated on system
Upgradeability
board
Video Support
DA - 13706
Integrated dual-port KR 10Gb with FlexFabric (FCoE or iSCSI) capability
ServerEngines BE3
x8 PCI Express 2.0
Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex
theoretical bandwidth
NOTE: Each port is autosensing 1 Gb / 10 Gb, and can interoperate with 1
Gb HP BladeSystem c-Class interconnect components. Both ports will
operate at the same speed.
NOTE: Each port on the NC553i adapter transmits from the server at 20
Gbps (theoretical) full duplex.
802.1p QoS, 802.1Q VLAN tagging, 802.3ad link aggregation, 802.3ap
10GBase-KR, and 802.3x flow control
ProLiant Teaming including Network Fault Tolerance, Transmit Load
Balancing, and Switch-Assisted Load Balancing
9K Jumbo frames (4K Jumbo frames when in FCoE mode)
Microsoft Windows Receive Side Scaling (RSS)
Accelerated iSCSI
PCI Express based health and remote management ASIC
PCI Express RISC processor core running at 250MHz
Option firmware upgradeable via Flash ROM
1600 x 1200 DVR max resolution
North America — Version 21 — November 18, 2011
Page 39
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Technical Specifications
Interfaces
Memory
Operating System
Support
One Ethernet Sideband connection (10/100/1000 Mb/s)
One Ethernet network connection (10/100Mb/s)
128 MB DDR with ECC
Microsoft Windows 2008 R2
Microsoft Windows 2008 (32 bit and 64 bit)
Microsoft Windows Server 2008 Standard Edition (32bit and 64bit)
Microsoft Windows Server 2008 Enterprise Edition (32bit and 64bit)
Microsoft Windows Server 2003 and Windows Server 2003 R2, and
Windows Server 2003 for Extended Systems Standard Edition, Enterprise
Edition
Red Hat Enterprise Linux 5.4 (32 bit and 64 bit)
SUSE LINUX Enterprise Server 11 (32bit and 64bit)
SUSE LINUX Enterprise Server 10 (32bit and 64bit)
VMware ESX 4.0
VMware ESX 3.5.0
Client System Support
Microsoft Windows 7
Microsoft Windows XP Professional Edition
Microsoft Windows Vista Business and Ultimate Editions
Red Hat Enterprise Desktop 5.00
SUSE Linux Enterprise Desktop 11
SUSE Linux Enterprise Desktop 10
Client Browser Support
Microsoft Internet Explorer 8
Microsoft Internet Explorer 7
Microsoft Internet Explorer 6
Firefox 3.5 (on supported Windows and Linux systems)
Firefox 3.0 (on supported Windows and Linux systems)
Command Line Support Secure Shell and serial port access
Secure Socket Layer
Secure Shell version 2
Security
Advanced Encryption Standard (AES) and Triple Data Encryption Standard
(3DES) on browser, CLP and XML scripting interface
AES encryption of video
RC4 encryption of video
Directory Support Services Active Directory v1.0 (Windows 2003)
Driver Support
HP ProLiant iLO3 Management Controller Driver Package
SNMP, IPMI 2.0 (system and LAN interface), DMTF Systems Management
Management protocols
supported
Architecture for Server Hardware Command Line Protocol (SMASH CLP), HP
RIBCL XML
DA - 13706
North America — Version 21 — November 18, 2011
Page 40
QuickSpecs
HP ProLiant BL460c Generation 7 (G7) Server Blade
Technical Specifications
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2011 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are
trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13706
North America — Version 21 — November 18, 2011
Page 41