Sartorius CPA12001S-OCE Specifications

Complete Catalog
Laboratory Mechatronics
turning science into solutions
2
A Profile of Sartorius
The Sartorius Group is a leading international laboratory and process technology
provider covering the segments of biotechnology and mechatronics. In 2008,
the technology group earned sales revenue
of 611.6 million euros. Founded in 1870,
the Goettingen-based company currently
employs approximately 4,600 persons.
The major areas of activity in its biotechnology segment focus on filtration, fluid
management, fermentation, purification
and laboratory applications. In the mechatronics segment, the company primarily
manufactures equipment and systems
featuring weighing, measurement and
automation technology for laboratory
and industrial applications.
Key Sartorius customers are from the
pharmaceutical, chemical and food and
beverage industries and from numerous
research and educational institutes of the
public sector. Sartorius has its own production facilities in Europe, Asia and America
as well as sales subsidiaries and local
commercial agencies in more than
110 countries.
3
4
Table of Contents
Weighing Technology for Laboratories 6
Cubis®. The New Benchmark
8
Premium Ultramicrobalances and
Microbalances SE2, ME5 and ME36S
12
Premium Semimicrobalances and
Analytical Balances Sartorius ME
13
Standard Microbalances,
Semimicrobalances, Analytical
and Precision Balances From the
New Sartorius CP
14
Standard Analytical and
Precision Balances Extend
17
Budget-Class Analytical and
Precision Balances Talent
19
Accessories
21
Safety Weighing Cabinet SWC
24
Sartorius Density Determination
27
Bluetooth® Wireless Technology
28
Electrostatics
29
Sartorius Pipette Calibration
30
OEM Products
32
Moisture and Water Content
Measurement
34
Absolute Measurement Procedure
– Thermogravimetry
– Coulometry
37
48
Indirect Measurement Procedure
– Microwave Resonance
– NIR Spectroscopy
51
55
Mass Metrology
58
Automatic Mass Comparators
and Robots
60
Manual Mass Comparators
61
Accessories for Mass Determination
62
Weights and Weight Sets (YCW, YCS)
63
Electroanalysis for Laboratories
70
Sartorius
DocuClip®
& Docu-pHMeter
72
Professional Meter
74
pH|mV Meter
76
Sensors for the Highest Measuring
Quality
77
Accessories
79
Process Weighing & Control
80
Service
84
5
6
Weighing
Technology for
Laboratories
7
Cubis®. The New Benchmark
Cubis is the first completely modular laboratory balance series. It is freely configurable and adaptable to different fields of
application. Every Cubis is an uncompromising implementation of an individual
requirement profile. The Cubis meets our
stringent criteria for advanced pharma
compliance and is ideally suited to quality
management systems in the regulated
areas of the pharmaceutical industry.
The modular Cubis system consists of
display units and service units, weighing
modules and draft shields.
Interface modules and a complete range of
accessories permit further individual adaptations. Cubis – the most sophisticated way
to concentrate on what’s necessary.
The operating concept Q-Guide –
reference for fast and trouble-free
navigation
Tasks and individual work processes can be
set up in a quick and trouble-free way with
the new operating concept Q-Guide. Thus
the software and user interface of the
Cubis always present the user with only
that part of the complete set of options
that this user requires to perform his application. If the user has defined a task, he is
guided directly and interactively through
the settings; irrelevant information is
grayed out.
With a total of three service units, the
Cubis meets the demand of different operating philosophies and covers the entire
range of laboratory applications. From simple weighing to administration of complex
work processes using defined tasks and
user | password management.
MSE – weighing pure and simple
Large, high-contrast LCD display, easily
understood menu guide with short descriptions, and clearly arranged, precisely actuated keys.
8
MSU – Classic and universal
High-resolution, generously dimensioned,
monochrome graphical display and precisely actuated keys with a clear action point.
For users who wish to combine classical
operation via keys with the broadest
possible range of services.
MSA – The ultimate solution
Technology and information design of the
elite class. Touchscreen with high-resolution color TFT for brilliant reproduction of
text and graphics. Outstanding ease of use
and display quality, especially for complex
applications requiring frequent text entry.
Technological innovations position the
Cubis far ahead of the current standards
in the premium segment
The quality, reliability and precision of
Sartorius balances are legendary and
require no detailed commentary. But the
Cubis also offers: New benchmarks for
measurement accuracy, response time
and repeatability.
The first top-loading laboratory balance
with accuracy to five decimal places
The Cubis is the first mass-produced,
top-loading semimicrobalance with full
resolution up to 220 g. This design results
in an approx. 25% lower space requirement
compared to conventional laboratory balances with the same resolution. The combination of a compact construction, 0.01 mg
resolution and a weighing range up to
220 g is only possible with the Sartorius
monolithic weighing system, which is a
world first.
The first laboratory balance with Q-Pan
off-center load compensation
The Cubis is the first laboratory balance to
compensate for off-center loading of the
weighing pan. Q-Pan simultaneously offers
the user two advantages: A significant
reduction in the off-center load error and
consequently the use of larger weighing
pans.
The first balance with automatic
Q-Level leveling
Q-Level combines a newly developed sensor
system with the latest display technology,
thus making leveling of the scale easier,
faster and more reliable.
Q-Level optionally permits automatic selfactuated leveling at the touch of a button
or interactively guided leveling. The display
provides all the necessary information: The
position of the air bubble and the indication of which leveling foot should be
turned in which direction (standard in the
display and service units MSA and MSU;
MSE with warning message only).
Cubis. The first top-loading analytical
balance with a motorized draft shield
Even in draft shields, the Cubis is the new
benchmark in the premium class: Smoothrunning draft shield doors often offer
inadequate stability; however, higher
stability often makes disassembly more
difficult and leads to restricted visibility.
Not so with the Cubis. Despite their high
mechanical stability, the draft shields of
the Cubis run very smoothly thanks to their
new materials. They permit excellent visibility of the entire weighing chamber and
the sample and offer secure shielding
against external impact factors.
Sartorius is the first manufacturer to combine the maximum ease of use of a motorized draft shield with the minimum space
requirement of Cubis analytical balances
and semimicrobalances.
Fast and easy working with learning capability and control via ergonomic palmoperable keys mean that the motorized DA
draft shield can be adjusted to any work
process. In addition to the motorized drive,
the DI draft shield possesses an integrated
ionizer which, at the touch of a button,
eliminates the impact of electrostatic
charges on samples or sample vessels.
Advanced pharma compliance.
For the use of the Cubis in regulated
areas
Both inspection equipment monitoring as a
component of QM systems and the United
States Pharmacopeia set very stringent
requirements for supervisors and laboratory devices. The advanced pharma compliance of the Cubis offers more than the best
possible prerequisites for compliance with
general regulations. Advanced pharma
compliance permits the seamless integration of the Cubis into processes and thus
provides valuable support in implementing
individually designed safety concepts,
e.g. with
– easy, fast and thorough cleaning.
Only high-grade materials with smooth,
structure-free surfaces are used.
– Protection against manipulation with
user | password management.
– Audit trail function – logs major changes
to the device. In this way, errors can be
tracked quickly.
– Integrated Alibi memory for traceable
transfer to a PC of weighing data subject
to calibration requirements.
– Maximum connectivity with Q-Com.
Three fixed (USB, RS232C, Ethernet (not
on the MSE)) and three optional interfaces make almost all forms of bidirectional communication possible.
– GLP-compliant, configurable printout.
– All data, such as the user’s master data or
tasks, can be transferred easily and safely
from one Cubis to another using an SD
card (not on the MSE).
– Fully automatic calibration |
adjustment with isoCAL.
– Warning and reminder functions with
configurable action hierarchy for
leveling, minimum initial weights,
calibration | adjustment.
For cleaning purposes, all doors of the draft
shield can be disassembled in just a few
steps.
9
Please use the adjacent fields to enter the selection
made with the icon.
Cubis display and service units
Select the display and service unit and enter it in the field marked with the icon.
Types
MSA
MSU
MSE
Operation
Touchscreen, keys for central basic
functions
Keys
Keys
Display
High-resolution color TFT,
5.7” graphical display
High-resolution black-and-white,
5.7” graphical display
Black-and-white LCD display,
Adaptation of the
service unit
Tiltable display,
removable service unit
Tiltable display,
removable service unit
removable service unit
Standard data interfaces – USB (integrated into weighing module) – USB (integrated into weighing module) – USB (integrated into weighing
– RS232C accessory interface,
– RS232C accessory interface,
module)
25-pin (integrated into weighing module) 25-pin (integrated into weighing module) – RS232C accessory interface,
– Ethernet (integrated into display and
– Ethernet (integrated into display and
25-pin (integrated into weighing
service unit)
service unit)
module)
SD card reader
Integrated as standard into display and
service unit
Integrated as standard into display and
service unit
Operation of the
motorized draft shield
(only for DA or DI
draft shields)
Actuation via side keys or contactlessly
via IR switch (optional), learning
capability
Actuation via side keys or contactlessly
via IR switch (optional), learning
capability
Actuation via keys or contactlessly
via IR switch (optional), learning
capability
Applications
Unit conversion, SQmin function for
minimum initial weight according to
USP, isoCAL automatic calibration |
adjustment function, individual identifiers, density determination, statistics,
calculations, averaging, formulation,
weighing in percent, time-controlled
functions, totalizing, DKD measurement
uncertainty, second tare memory, counting, checkweighing
Unit conversion, SQmin function for
minimum initial weight according to
USP, isoCAL automatic calibration |
adjustment function, individual identifiers, density determination, statistics,
calculations, averaging, formulation,
weighing in percent, time-controlled
functions, totalizing, DKD measurement
uncertainty, second tare memory, counting, checkweighing
Unit conversion, SQmin function for
minimum initial weight according to
USP, isoCAL automatic calibration |
adjustment function, density determination (buoyancy method only), calculations, averaging, net | total formulation, weighing in percent, counting
Cubis leveling
Select the type of leveling and enter the identifier “Ø” or “1” in the field marked by the icon.
Ø
The Cubis shows the level indicator on the display and provides support for rapid leveling
(as standard on the display and service units MSA and MSU; only a warning message in MSE).
1
Fully automatic, motorized Q-Level leveling at the touch of a button (available for all analytical
balances and semimicrobalances with 0.1 mg or 0.01 mg readability and all precision balances with
1 mg readability).
Test certificates and permits
Select a test certificate | permit and enter the identifier in the field marked with the icon.
ØØ
Standard certificate of conformity to specifications
TR
Like ØØ, but with a detailed test protocol
CE
Calibrated in the factory with European calibration permit
Optional interface modules
Depending on the balance, it may be possible to select an additional interface module.
IR
RS232 interface, 25-pin
IB
Bluetooth® interface
IP
RS232 interface, 9-pin, inc. PS/2 interface
10
Cubis weighing modules
Enter the module identifier from the left, starting with the field marked with the icon.
Readability
[mg]
Weighing
capacity
[g]
Weighing
pan
(BxD)
[mm]
Typical
Typical Repeatability
stabilization response [mg]
time [s]
time [s]
225S
0.01
220
85 + 85
2
6
0…60 g: 0.015 0.1
60…220 g: 0.025
0.15 (100) 0.02
225P
0.01 | 0.02 |
0.05
60 | 120 |
220
85 + 85
2
6
0…60 g: 0.015 0.15
60…220 g: 0.04
0.2 (100)
0.02
125P
0.01 | 0.1
60 | 120
85 + 85
2
6
0…60 g: 0.015 0.15
60…120 g: 0.06
0.15 (50)
0.02
Linearity Off-center Minimum
[mg]
load [mg]* initial
(test load weight
[g])
[g]**
Analytical balances
0.1 mg
324S
0.1
320
85 + 85
1
3
0.1
0.3
0.3 (200)
0.12
224S
0.1
220
85 + 85
1
3
0.07
0.2
0.2 (100)
0.12
324P
0.1 | 0.2 | 0.5
80 | 160 | 320
85 + 85
1
3
0.1 | 0.2 | 0.4
0.5
0.4 (200)
0.12
124S
0.1
120
85 + 85
1
3
0.1
0.2
0.2 (50)
0.12
Precision balances
3203P
1 | 10
1,010 | 3,200
140 + 140 1
1.5
1|6
5
2 (1,000)
1.5
2203S
1
2,200
140 + 140 1
1.5
1
3
2 (1,000)
1.5
2203P
1 | 10
1,010 | 2,200
140 + 140 1
1.5
1|6
5
3 (1,000)
1.5
1203S
1
1,200
140 + 140 1
1.5
0.7
2
2 (500)
1.5
623S
1
620
140 + 140 0.8
1
0.7
2
2 (200)
1.5
623P
1|2|5
150 | 300 | 620 140 + 140 0.8
1
1|2|4
5
4 (200)
1.5
323S
1
320
140 + 140 0.8
1
0.7
2
2 (200)
1.5
10202S
10
10,200
206 + 206 1
1.5
7
20
20 (5,000) 12
8202S
10
8,200
206 + 206 1
1.5
7
20
20 (5,000) 12
6202S
10
6,200
206 + 206 1
1.5
7
20
20 (2,000) 12
6202P
10 | 20 | 50
1,500 | 3,000 |
6,200
206 + 206 1
1.5
7 | 20 | 40
50
50 (2,000) 12
4202S
10
4,200
206 + 206 0.8
1
7
20
30 (2,000) 12
2202S
10
2,200
206 + 206 0.8
1
7
20
20 (1,000) 12
1202S
10
1,200
206 + 206 0.8
1
7
20
20 (500)
12201S
100
12,200
206 + 206 0.8
1
50
100
200 (5,000) 100
8201S
100
8,200
206 + 206 0.8
1
50
100
200 (5,000) 100
5201S
100
5,200
206 + 206 0.8
1
50
100
200 (2,000) 100
12
* Position according to OIML R76 ** typical minimum initial weight according to USP (United States Pharmacopeia), USP31–NF26
Cubis draft shields
Select a draft shield and enter the corresponding identifier in the field marked with the icon.
DO
No draft shield. Please always enter this identifier for weighing modules with the weighing pan size 206 + 206 mm.
DE
Manual glass draft shield for precision balances with a readability of 1 mg.
DU
Manual analytical balance draft shield with smooth-running, wide-opening doors, unimpeded access to the weighing
chamber without interfering braces. For all models with 0.01 mg, 0.1 mg and 1 mg readability.
DA
Automatic, motorized draft shield with learning capability for ergonomic working and individual adaptation to different
applications. For all models with 0.01 mg, 0.1 mg and 1 mg readability.
DI
Like the DA draft shield, but with the addition of an integrated ionizer to eliminate the impact of electrostatic
charges in samples and vessels.
11
Premium Ultramicrobalances and Microbalances SE2, ME5 and
ME36S. Highest Precision – Even for the Smallest Sample Quantities
Fast results
With stabilization times of only 10 seconds,
the SE2 and ME5 will save you valuable
time during each weighing operation.
The premium microbalances meet the
most stringent requirements when it’s
necessary to achieve measurement results
quickly and with exceptional accuracy
The balances also offer maximum support
when used as testing equipment in the
context of a QM system. This is ensured
by performance features such as the
Design 1
Brilliant readability
The backlit, high-contrast graphical display
ensures excellent readability. Text-based
user guidance allows the balance to be
configured quickly and confidently “if you
need to do more than just weighing”.
– SQmin function: Display of the permitted
minimum initial weight according to the
United States Pharmacopeia (can be activated by Sartorius Service)
Flexible
Every ultramicrobalance and microbalance
has 14 built-in application programs as
standard features, such as air buoyancy
correction, differential weighing program,
and statistical evaluation.
– Fully automatic calibration and adjustment function (isoCAL)
– ISO|GLP-compliant logging
– Input of alphanumeric sample identifiers
Design 2
Design 3
Featuring a readability of 1 μg, the ME36S
offers an exceptionally wide weighing
range up to a capacity of 31 g and outstanding metrological specifications, making it ideal for highly accurate microweighing and for weighing microquantities into
heavy tare containers.
100% glass draft shield
The motorized draft shield on the SE2 and
ME5 is made entirely of glass with no
frame to obstruct your view. A special
coating on the glass inside the chamber
eliminates interfering factors – such as
those caused by electrostatically charged
objects.
All balance-generated data can be logged
via the standard RS232Cdata interface.
Cleaning as easy as 1-2-3
In just one easy step, you can completely
remove the draft shield. The weighing
chamber base plate features smooth,
easy-to-clean surfaces. Such design
features really pay for themselves
whenever absolute cleanliness is the
number one priority.
Filter weighing
The models ME5-F and SE2-F were specially
designed for weighing filters of up to
90 mm in diameter. The draft shield is
made completely of metal, thereby minimizing the interfering effects of static
electricity.
Easy to operate
The generously sized opening of the draft
shield moves to any desired position – you
can choose to operate the draft shield by
pressing a palm-operable key, a foot switch
(optional) or an external computer.
Specifications
Model
SE2***
ME5***
ME36S*** SE2-F
Filter
balance
ME5-F
Filter
balance
Weighing capacity
g
2.1
5.1
31
2.1
5.1
Readability
μg
0.1
1
1
0.1
1
Repeatability (±)
μg
0.25
1
2
0.25*
1**
Linearity (< ±)
μg
0.9
4
10
0.9*
4**
Response time (average)
s
10
10
14–18
10*
10**
Weighing pan d
mm 20
30
30
50 or 20
(75 and 90
optional)
50 or 30
(75 and 90
optional)
1
3
2
2
Design
1
* with standard weighing pan d 20 mm
** with standard weighing pan d 30 mm
*** Models SE2, ME5 and ME36S are available in calibrated versions
12
Premium Semimicrobalances and Analytical Balances:
Sartorius ME – When Results Matter
Unrivaled speed
An outstanding feature of the Sartorius ME
series is speed: stable readouts with five
decimal places in just eight seconds.
User-friendly palm-activated keys for draft
shield operation; foot switch optional for
applications where you need your hands free
Controlled by palm-operable keys or by custom programming, the draft shield closes
quietly, precisely and quickly. It can be
adapted to any weighing scenario, according to the requirements of your application.
Prompts in clear English for operator
guidance
Unrivaled stability
Repeatability of the weights measured is an
additional strength of the Sartorius ME.
The results are just as stable as the monolithic weighing system of the ME.
The Sartorius ME is amazingly impervious
to the surrounding environment of its
installation location. Interfering static electricity on samples and tare containers can
be neutralized at the touch of a button.
Unrivaled reliability
Sartorius ME stands for reliability, year in,
year out. That’s why we are offering a threeyear warranty, which we will extend on
request up to a total of five years.
The Facts
Unique monolithic weighing system
Three-part, motorized draft shield system
Neutralization of static electricity
Alphanumeric input capability for sample
IDs
Software support for use in quality
management systems
SQmin function displays the minimum initial weight in accordance with the United
States Pharmacopeia (can be activated by
Sartorius Service)
Display of measurement uncertainty
according to the German Calibration
Service (DKD)
ISO|GLP-compliant, user-configurable
records|printouts
Built-in applications
Built-in software supports all key laboratory
weighing applications to ensure smooth,
time-saving lab procedures and reliable
results.
– Density determination
– Calculation of weights using a definable
factor or equation
– Statistical evaluation
– Differential weighing
– Air buoyancy correction
– Air density determination
Specifications
Model
ME235S
ME235P
ME235P-SD* ME614S ME414S ME254S
Weighing capacity (g) 230
60|110|230
60|110|230
Readability (mg)
0.01
Repeatability
(<mg)
0.015
(0–60 g)
0.025
(60–230 g)
Linearity (< ± mg)
0.1
610
410
250
0.01|0.02|0.05 0.01|0.02|0.05 0.1
0.015
(0–60 g)
0.040
(60–110 g)
0.040
(110–230 g)
0.1
0.1
0.015
(0–60 g)
0.040
(60–110 g)
0.040
(110–230 g)
0.1
0.1
0.07
0.15
0.15
0.4
0.3
0.15
Response time (<s) 8
8
8
3
2.5
2.5
Off-center load at 1 0.15
maximum load (<mg)
(according to OIML R76)
0.2
0.2
0.6
0.4
0.3
Weighing pan
diameter (mm)
90
90
90
90
90
253
195
253
253
253
90
Clearance above
253
weighing pan (mm)
All models are available in verified versions (excluding *)
* with short-design draft shield and pipette opening, d 60 mm, with cover
13
Standard Micro-, Semimicro-, Analytical and Precision Balances
The New Sartorius CP: Unrivalled in Its Performance Class
As the successor to the Sartorius Competence series, which proves its reliability on
a daily basis in practical use, the Sartorius
CP also sets standards for engineering,
quality and features. If you want to avoid
taking risks when you make the investment
in a new balance, the new CP is the best
choice you can make.
Whether your samples are in the microgram range or up to 34 kg, the Sartorius
CP series with its 29 models offers the right
instrument for practically every weighing
task in the laboratory.
Engineering
All balances in the Sartorius CP series are
equipped with a monolithic weighing system available only from Sartorius. This system is not only incredibly precise, but also
exceptionally reliable and durable.
And the new Sartorius CP scores winning
points with further technical advantages
that ensure continuous operation of the
balance with the greatest possible
accuracy:
Take the built-in, motorized adjustment
weight: Just touch the CAL key, and the
balance will automatically perform internal
calibration and adjustment – whenever
required in your process.
And there’s the isoCAL function. When the
ambient temperature changes by a specific
value or once a defined time interval has
elapsed, isoCAL performs internal calibration and adjustment fully automatically.
Therefore, the balance ensures that calibration is carried out at regular intervals, and
delivers consistently high accuracy.
On top of this, the high-contrast, backlit
display is exceptionally easy to read under
any room lighting conditions (non-backlit
micro- and semi-microbalances available).
14
Quality
Not just the housing, but also the entire
construction of the new Sartorius CP with
its powerful core, the monolithic weighing
system, stand up to the abuse of tough
daily use. The same goes for the control
keys, the components on a balance that are
most frequently used. Even after they have
been pressed tens of thousands of times,
they will continue to work precisely, just
like they did from day one, with positive
click action for reliable activation of their
respective functions.
Features
The Sartorius CP has precisely the features
you need for fast and professional
processing of weighing tasks in everyday
laboratory routines. This includes ISO/GLPcompliant documentation. Connected to
a Sartorius YDP20-0CE data printer or a
computer, the new Sartorius CP enables
you to comply with documentation
requirements for use in a quality
management system.
The draft shield designs of the balance
models featuring readabilities of 1 μg, 2 μg,
0.01 mg, 0.1 mg or 1 mg are also impressive.
Both the construction and size are specially
adapted to the particular readability, offering tangible assets in actual use:
– Excellent shielding from drafts
– Draft shield doors that glide open
smoothly for optimal access to the
weighing chamber
– Outstandingly easy-to-clean design.
A bidirectional RS232C data interface
provides the ideal basis for communication,
for example with a PC.
For advanced applications, such as weighing in percent, net-total formulation,
dynamic weighing or animal weighing,
mass unit conversion and counting, the CP
offers easy-to-run programs as standard
features.
Specifications
Model
Readability
(mg)
Weighing Repeatacapacity bility
(g)
(< ± mg)
Linearity
(< ± mg)
Response Weighing
time
pan
(average) (mm)
(< s)
Design
CPA2P
0.001|
0.002|
0.005
0.5|1|
2
0.001|
0.002|
0.003
0.002|
0.004|
0.005
10
d 20
1
CPA26P
0.002|
0.01
5|21
0.004
0.008
10
d 50
3
CPA2P-F
Filter balance
0.001|
0.002|
0.005
0.5|1|
2
0.002|
0.003|
0.004
0.002|
0.004|
0.005
10
d 20
2
d 125
Filter weighing pan
40|100| 0.02|0.05| 0.03|0.1|
220
0.1
0.2
6|3
d 80*
4
Microbalances
Design 1
Semimicrobalance
Design 2
CPA225D
0.01|
0.01|0.1
Analytical balances
CPA324S
0.1
320
0.2
0.3
3
d 80*
5
CPA224S
0.1
220
0.1
0.2
2
d 80*
5
CPA124S
0.1
120
0.1
0.2
2
d 80*
5
CPA64
0.1
64
0.1
0.2
2
d 80*
5
* Triangular weighing pan shape.
d = Diameter of the inner circle.
Design 3
Design 4
Design 5
15
Specifications
Model
Readability
(g)
Weighing Repeatacapacity bility
(g)
(< ± g)
Linearity
(< ± g)
Response Weighing
time
pan
(average) (mm)
(< s)
Design
Precision balances
CPA1003S**
0.001
1,000
0.001
0.002
2
d 110*
6
CPA623S
0.001
620
0.001
0.002
1.5
d 110*
7
CPA1003P**
0.001|
0.01
500|
1,000
0.001|
0.01
0.002|
0.02
2
d 110*
6
CPA423S
0.001
420
0.001
0.002
1.5
d 110*
7
CPA323S
0.001
320
0.001
0.002
1.5
d 110*
7
CPA223S
0.001
220
0.001
0.002
1.5
d 110*
7
CPA6202S
0.01
6,200
0.01
0.02
1.5
190 +204
8
CPA5202S-DS** 0.01
5,200
0.01
0.02
1.5
d 130
9
CPA4202S
0.01
4,200
0.01
0.02
1.5
190 +204
8
CPA3202S
0.01
3,200
0.01
0.02
1.5
190 +204
8
CPA2202S
0.01
2,200
0.01
0.02
1.5
190 +204
8
CPA2202S-DS** 0.01
2,200
0.01
0.02
1.5
d 130
9
CPA6202P
0.01|
0.02|
0.05
1,500|
3,000|
6,200
0.01|
0.01|
0.03
0.02|
0.02|
0.05
1.5
190 +204
8
CPA34001S
0.1
34,000
0.1
0.2
2
400+300
10
CPA16001S
0.1
16,000
0.1
0.2
2
400+300
10
CPA12001S
0.1
12,000
0.1
0.2
2
400+300
10
Design 6
Design 7
Design 8
Design 9
Design 10
16
CPA10001
0.1
10,000
0.1
0.2
1
190+204
8
CPA8201
0.1
8,200
0.1
0.2
1
190 +204
8
CPA34001P
0.1|
0.2|
0.5
8,000|
16,000|
34,000
0.1|
0.2|
0.5
0.3|
0.3|
0.3
2
400 +300
10
CPA5201
0.1
5,200
0.1
0.2
1
190 +204
8
CPA34000
1
34,000
0.5
1
1.5
400+300
10
* Triangular weighing pan shape. d = Diameter of the inner circle. ** = Equipped
with the analytical balance draft shield as a standard feature. All models are available in
calibrated versions (excluding CPA2P, CPA2P-F, CPA2202S-DS, CPA5202S-DS, CPA1003P).
Accessories available on request.
Standard Analytical and Precision Balances Extend
The New Achievers for Your Lab
On paper, many lab balances look the same.
But in the real world, there’s more to a lab
balance than just its technical specifications.
The new Sartorius Extend series was specially designed for effective and reliable
weighing in daily lab routines. This is where
more powerful technology and application-oriented operation and features make
all the difference.
Winning technology
More versatility in high-resolution applications: 1 mg to 620 g and 10 mg to 6200 g.
High-end technology made standard.
The monolithic weighing system, only
available from Sartorius worldwide, offers
unique prerequisites for permanently high
measurement accuracy and reliability.
The latest powerful microprocessor technology ensures shorter response times for
faster results. In an Extend balance with
1 mg readability, the typical response time
is just 1 to 1.2 seconds. Reliable weighing
results are achieved all the time – even
under less than ideal ambient conditions,
thanks to the Extend’s highly sophisticated
digital compensation algorithms.
Ease of use
When you need to get a heavy workload
of repetitive applications done fast and
reliably, day in and day out, the last thing
you need is a lab balance so complicated
that it causes operating errors and wastes
your valuable time as a result. This is not
the case with the Sartorius Extend. A simple, easy-to-understand control panel, key
function assignments and the easy-to-read
display are ideal for efficient weighing in
your lab.
The range of features
Add up all features of the new Sartorius
Extend, and you’ll find all the advantages
that only a genuine Sartorius lab balance
can offer: features that pay for themselves,
time and again.
A built-in, motorized calibration weight is
standard in all analytical balances. Applied
at a touch of a button, it ensures the highest weighing accuracy. The precision balances, depending on requirements, are
available in two versions – with internal
calibration (-CW) or external calibration.
Whenever you need ISO/GLP-compliant
documentation of raw data or calibration|
adjustment data, the Sartorius Extend
balance provides it at the touch of a key
(in combination with the optional
YDP20-0CE data printer).
The easy-to-clean draft shield chamber on
the analytical balances provides optimal
lighting conditions inside, thanks to its
nearly frameless all-glass design.
The following additional built-in
application programs come as standard:
Weighing in percent, net-total-formulation, calculation (multiplication|division),
dynamic weighing|animal weighing, mass
unit conversion, and counting
The bidirectional RS232C data interface is
another standard feature. Alternatively,
Sartorius can provide an adapter cable for
connection to a USB port.
User-friendly operation: short, plainEnglish text prompts and cursor keys for
navigation make it simple for you to configure the balance to meet your individual
requirements.
The backlit display with its 15-mm digits
means the results of measurement are plain
to see, under any lighting conditions.
The level indicator is positioned conveniently right next to the display – so that
checking whether the balance is level
becomes “second nature” to the operator.
17
Specifications
Model
Readability
(mg)
Weighing Repeatacapacity bility
(g)
(mg)
Linearity
(< ± mg)
Response
time
(average
in s)
Weighing
pan
(mm)
Design
Analytical balances
Design 1
ED224S
0.1
220
0.1
0.2
2.5
d 90
1
ED124S
0.1
120
0.1
0.2
2.5
d 90
1
Model
Readability
(g)
Weighing Repeatacapacity bility
(g)
(g)
Linearity
(< ± mg)
Response
time
(average
in s)
Weighing
pan
(mm)
Design
Precision balances
Design 2
Design 3
Design 4
ED623S-CW
0.001
620
0.001
0.002
1
d 115
2
ED623S*
0.001
620
0.001
0.002
1
d 115
2
ED423S-CW
0.001
420
0.001
0.002
1
d 115
2
ED423S*
0.001
420
0.001
0.002
1
d 115
2
ED323S-CW
0.001
320
0.001
0.002
1
d 115
2
ED323S*
0.001
320
0.001
0.002
1
d 115
2
ED153-CW
0.001
150
0.001
0.002
1.3
d 115
2
ED153*
0.001
150
0.001
0.002
1.3
d 115
2
ED6202S-CW
0.01
6,200
0.01
0.02
1.1
180 +180
4
ED6202S*
0.01
6,200
0.01
0.02
1.1
180 +180
4
ED4202S-CW
0.01
4,200
0.01
0.02
1.1
180 +180
4
ED4202S*
0.01
4,200
0.01
0.02
1.1
180 +180
4
ED3202S-CW
0.01
3,200
0.01
0.02
1.1
180 +180
4
ED3202S*
0.01
3,200
0.01
0.02
1.1
180 +180
4
ED2202S-CW
0.01
2,200
0.01
0.02
1.1
180 +180
4
ED2202S*
0.01
2,200
0.01
0.02
1.1
180 +180
4
ED822-CW**
0.01
820
0.01
0.02
1
d 150
3
ED822*
0.01
820
0.01
0.02
1
d 150
3
ED8201-CW
0.1
8,200
0.1
0.1
1
180 +180
4
ED8201*
0.1
8,200
0.1
0.1
1
180 +180
4
ED5201-CW
0.1
5,200
0.1
0.1
1
180 +180
4
ED5201*
0.1
5,200
0.1
0.1
1
180 +180
4
ED2201-CW
0.1
2,200
0.1
0.1
1
180 +180
4
ED2201*
0.1
2,200
0.1
0.1
1
180 +180
4
All models, except those marked with *, are devices available in calibrated versions.
** Weighing pan size for calibrated versions: 180 + 180 mm.
18
Budget-Class Analytical and Precision Balances Talent
The Affordable Introduction to Sartorius Weighing Technology
Sartorius Talent series balances are the
alternative for all your simple weighing
operations: economically priced yet with an
uncompromisingly high degree of quality,
reliability and sophisticated weighing technology. Whether you need to operate a
balance in the lab, at school or a university,
or in the field using the battery function,
a balance from the Sartorius Talent series
will always be the number one choice.
19 models – one design
The right weighing capacity for every
application and every budget? No problem
with the Talent series. It offers you 3 analytical balances with weighing capacities
of 60 g, 120 g and 210 g, respectively, and
a total of 16 precision balances – ranging
from the top-of-the-line model with a
3,100-g weighing capacity and 0.01-g
readability to the high-capacity model
featuring a 12-kg capacity.
Built-in application software
Talent series balances offer various application programs as standard features to make
routine work easy: weighing in percent,
net-total formulation, weigh averaging|
dynamic weighing, counting and mass unit
conversion.
RS232C data interface
Each model comes standard with a bidirectional RS232C data interface. This means
no extra cost if you need to log the balance-generated results on an optional
printer or connect a remote display for
use in the educational sector.
Ease of use
When it comes to strictly weighing, ease of
use is the top priority. The balances in the
new series prove to be particularly talented
in this area: Just set it up, switch it on, and
start weighing. It couldn’t be any easier.
Dependable and accurate
Permanent reliability and weighing
certainty are ensured by the innovative
weighing system technology, and the
robust construction of the balance
housing.
Portability is standard
Many of the Talent series balances are also
battery-operable, providing an alternative
to line current operation. The built-in
“power-saver” feature extends the service
life of the battery. This function will automatically shut off the balance if a key has
not been pressed after 2 minutes. An added
benefit of this portable application: the
balance is compact and lightweight.
19
Specifications
Model
Readabil- Weighing Repeataity
capacity bility
(mg)
(g)
(< ± g)
Linearity
(< ± g)
Response Weighing
time
pan
(average) (mm)
(s)
Design
Analytical balances
TE214S
0.1
210
0.0001
0.0002
3
d 90
1
TE124S
0.1
120
0.0001
0.0002
3
d 90
1
TE64
0.1
60
0.0001
0.0002
3
d 90
1
Model
Readabil- Weighing Repeataity
capacity bility
(g)
(g)
(< ± g)
Design 1
Linearity
(< ± g)
Response Weighing
time
pan
(average) (mm)
(s)
Design
0.002
2.5
d 100
2
Precision balances
Design 2
Design 3
TE313S
0.001
310
0.001
TE313S-DS*
0.001
310
0.001
0.002
2.5
d 100
1
TE153S
0.001
150
0.0015
0.003
2.5
d 100
2
TE153S-DS*
0.001
150
0.0015
0.003
2.5
d 100
1
TE3102S
0.01
3,100
0.01
0.02
2.5
174 +143
4
TE1502S
0.01
1,500
0.015
0.03
2.5
174 +143
4
TE612
0.01
610
0.01
0.02
2
d 116
3
TE412
0.01
410
0.01
0.02
2
d 116
3
TE212
0.01
210
0.01
0.02
2
d 116
3
TE6101
0.1
6,100
0.1
0.2
2
174 +143
4
TE4101
0.1
4,100
0.1
0.2
2
174 +143
4
TE2101
0.1
2,100
0.1
0.2
1.5
174 +143
4
TE601
0.1
610
0.1
0.2
1.5
174 +143
4
TE12000
1
12,000
1
2
1.5
174+143
4
TE6100
1
6,100
1
2
1.5
174+143
4
TE4100
1
4,100
1
2
1.5
174+143
4
* with analytical balance draft shield
Design 4
20
Accessories
Accessories for Cubis models
Calibratable data printer for connection to RS232,
25-pin Accessory interface
YDP10-0CE
Calibratable data printer with Bluetooth® data transfer
(only in connection with YDO01MS-B or option IB)
YDP10BT-0CE
Paper rolls for printer YDP10-0CE; 5 x 40 m rolls
6906937
Adhesive labels on normal paper for YDP10BT-0CE
(20 m continuous roll + 57 mm)
69Y03247
Color ribbon for YDP10-0CE and YDP10BT-OCE
6906918
Additional display, LCD, figure size 13 mm, backlit
YRD03Z
RS232C connection cable, to connect to PC with
9-pin COM interface, length 2 m
7357314
Standard operating procedure (SOP)
YSL07D
Infrared sensor for contactless function triggering
(e.g. draft shield control)
YHS01MS
Hand switch for printing, taring or using a function key;
Selection via menu, inc. T-connector
YHS02
Foot switch for printing, taring or using a function key;
Selection via menu, inc. T-connector
YFS01
Foot switch for the functions open/close draft shield (only in combination
with DA and DI draft shield), taring and printing
YPE01RC
Density determination kit for solids and liquids for weighing modules
with a readability < 1 mg
YDK01MS
3-segment control display, red – green – red,
for plus|minus weighings, inc. T-connector
YRD11Z
Barcode reader with connection cable, 120 mm reading range
YBR03PS2
Pipette calibration kit for models with 0.01 mg and 0.1 mg readability;
hardware and software
on request
Software for pipette calibration
on request
RS232C data interface 25-pin for connection of Cubis accessories
YDO01MS-R
Data interface ® for wireless connection of data printer YDP10BT
YDO01MS-B
RS232C data interface, 9-pin including PS/2 for connecting a PC
or a keyboard
YDO01MS-P
Antistatic weighing pan, diameter 130 mm, for weighing modules
with a readability of 0.1 mg or 0.01 mg
YWP01MS
Antistatic weighing pan, diameter 150 mm, for weighing modules
with a readability of 1 mg
YWP02MS
Support arm for 10/100 mg precision weighing modules for
raising the service units MSE, MSU, MSA
YDH01MS
Weighing table made from synthetic stone, with vibration dampening
YWT03
Wall console
YWT04
Weighing table from wood with synthetic stone for precise,
reliable measurements
YWT09
Service unit with backlit LCD display and tactile keys
YAC01MSE
Service unit with backlit b/w graphic display and tactile navigation keys
YAC01MSU
Service unit with color TFT graphic display and touchscreen
YAC01MSA
Display cable 3 m for Cubis models, or separated setup of display
and weighing unit
VF4016
SartoCollect software for data communication between balance and PC
YSC02
Sartorius OPC server for integration of all Sartorius Cubis balances
(requires 32-bit Microsoft Windows 2000 or XP with current service packs).
(free download of a 30-day trial version from the Sartorius website)
– Initial license
– Each additional license within an order
6289OPC
6289OPC-
The brand name and logo for Bluetooth® wireless technology are owned by Bluetooth SIG Inc.
The use of this brand name and trademark by Sartorius AG is under license.
Other brand names and trade names belong to their respective owners.
21
Accessories for all ME, SE, CPA, ED and TE models
Data printer, calibratable, with date, time, statistics
YDP20-0CE
Paper rolls for printer YDP20-0CE; 5 x 40 m rolls
6906937
Color ribbon for YDP20-0CE
6906918
Adhesive labels on normal paper for YDP20-0CE (20 m continuous roll)
69Y03247
SartoCollect, data transfer and integration on computer
4SC02
Weighing table for precise, reliable weighings
YWT09
Weighing table made from synthetic stone, with vibration dampening
YWT03
Wall console
YWT04
Additional display
LCD, figure size 13 mm, reflective
YRD02Z
Hand switch, inc. T-connector
YHS02
Foot switch, inc. T-connector
YFS01
Ionization blower for electrostatically charged samples [220 V]
YIB01-0DR
Ionization blower for electrostatically charged samples [110 V]
YIB01-0UR
Ionization probe Stat-Pen
for discharging electrostatically charged samples
YSTP01
T-connector for connection of 2 peripheral devices
YTC01
RS232C |USB connection cable, for connection to a PC via USB interface;
length 1.5 m
YCC01-USBM2
RS232C connection cable, for connection to a PC with 25-pin COM
interface; length approx. 2 m
7357312
RS232C connection cable, for connection to a PC with 9-pin COM
interface; length approx. 2 m
7357314
Standard operating procedure (SOP)
YSL01D
LCD, figure size 13 mm, reflective
YRD03Z
3-segment control display, red – green – red,
for plus|minus weighings, inc. T-connector
YRD11Z
Accessories for ME models and SE2
Battery set, external with optical charge control display
for SE2, ME5 and all ME models
YRB05Z
Antistatic weighing pan for electrostatically charged samples
for ME235S, ME235P, ME254S, ME414S, ME415S and ME614S
for ME5
YWP01ME
YWP01MC
Density determination kit
for ME235S, ME235P, ME254S, ME414S, ME415S and ME614S
YDK01
Storage plate, for acclimatization of materials to be weighed,
for all ME models (excluding ME5)
YGS01ME
Weighing scoop made from chrome nickel steel, 90 mm + 32 mm + 8 mm
641214
Foot switch, inc. T-connector
for all ME models and SE2
YPE01RC
Barcode reader, for all ME models and SE2 (YCC01-0024M01 required)
YBR02FC
Cable with T-connector, for connection of the barcode reader
Bluetooth ® RS232C adapter with external antenna
(only point-to-point connections)*
Bluetooth ® USB adapter (point-to-multipoint capability)*
YCC01-0024M01
YBT01
YBT02
* The operation of these devices is only permitted in the following countries: Austria, Belgium, Denmark, Finland,
France (indoor use only), Germany, Greece, Iceland, Ireland, Liechtenstein, Luxembourg, the Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland, and the United Kingdom.
22
Accessories for CPA and ED models
Battery set, external, with optical charge control display
up to 10 kg weighing capacity
from 12 kg to 34 kg weighing capacity
YRB05Z
YRB06Z
Analytical balance attachment
for CPA623S, CPA423, CPA323S, CPA223S
YDS01CP
Antistatic weighing pan
for CPA225D, CPA324S, CPA224 S, CPA124S, CPA64, ED224S, ED124
YWP01CP
Density determination kit
for CPA225D, CPA324S, CPA224S, CPA124S
for ED224S, ED124S
YDK01
YDK01LP
Draft shield cover with hole (d 30 mm)
for CPA623S, CPA423S, CPA323S, CPA223S
YDS02CP
Hook for under-scale weighing, screwable, for CPA12001S, CPA16001S,
CPA34001S, CPA34001P, CPA34000
69EA0040
Bluetooth ®-RS232C adapter with external antenna
(only point-to-point connections)*
YBT01
Bluetooth ®-USB
YBT02
adapter (point-to-multipoint capability)*
In-use dust cover
for display and control unit CPA34001S, CPA16001S, CPA12001S,
CPA34001P, CPA34000
for CPA423S, CPA323S, CPA623S, CPA223S
for CPA4202S, CPA3202S, CPA2202S, CPA8201, CPA6202S, CPA6202P,
CPA5201, CPA10001
for display and control unit CPA225D, CPA324S, CPA224S, CPA124S, CPA64
6960CP01
6960CP02
6960CP03
6960CP04
Accessories for TE models
Battery set, external (service life: 20 or 40 hours, depending on model)
YRB08Z
* The operation of these devices is only permitted in the following countries: Austria, Belgium, Denmark, Finland,
France (indoor use only), Germany, Greece, Iceland, Ireland, Liechtenstein, Luxembourg, the Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland, and the United Kingdom.
23
24
Safety Weighing Cabinet SWC
Safe Weighing of Toxic and Powdery Substances
For researchers and laboratory technicians,
working with poisonous or highly reactive
substances does pose a considerable risk.
Especially when weighing, the smallest
sample amounts have a high risk potential.
Health and safety are top priorities
In order to protect the health of laboratory
personnel, proper safety measures must be
taken when weighing dangerous powdered
substances.
The Sartorius Safety Weighing Cabinet
SWC offers many significant design advantages over a regular laboratory hood:
It creates a contained area around the
laboratory balance which prevents any air
or finely powdered particulates from
escaping into the operating personnel’s
work area. At the same time, the constant
inlet air velocity and the special cabinet
construction both keep the air current
practically turbulence-free, and, as a result,
ensure consistent and repeatable weighing
results.
Single-source equipment
The balance and weighing cabinet are perfectly matched to each other. With its SWC
Safety Weighing Cabinet, Sartorius has succeeded in uniting two otherwise contradictory requirements: maximum personnel
protection and reliable weighing results.
The Safety Weighing Cabinets are available
in four different sizes for special applications, such as using a second laboratory
balance in the cabinet or for unusually
high structures.
Each of the four basic models consists of:
Safety Weighing Cabinet with a separate
HEPA filter unit, data-logging alarm, lighting unit, waste disposal system (on one
side), airflow smoke test kit and anti-static
cleaning wipes.
Sartorius SWC Safety Weighing Cabinets
comply with the requirements of EN14175.
25
Model with
filter unit
Model without
filter unit
Dimensions in mm
(Width + Depth + Height)
SWC900
SWC900NF
890 +750+510
SWC1200
SWC1200NF
1230 +750+510
SWC900T
SWC900TNF
890 +750+770
SWC1200T
SWC1200TNF
1230 +750+770
Accessories
YWCF02
Carbon filter for solvent vapors
YWCF03
Box for carbon filter; for attachment to the filter box
YWCG01
Disposal chute for attachment to the side of the cabinet
YWCG02
Disposable chute bags (100 pcs)
YWCG03
Muffler for attachment to fan filter box
YWCG04
Airflow smoke test kit
YWCG07
Antistatic decontamination wipes
YWCG16
Printer table for attachment to the cabinet
YWT10
Laboratory bench; fits SWC900, SWC900T and SWC900NF
YWT11
Laboratory bench; fits SWC1200, SWC1200T and SWC1200NF
Other accessories for our Safety Weighing Cabinets are available on request.
All of the balances listed below have been tested for use in the Safety Weighing Cabinet and
achieved their typical repeatability with correspondingly extended response times.
Balance series
ME|SE
Sartorius CPA
Microbalances
ME5
ME36S
CPA2P
Semimicrobalances
ME235S
ME235P
CPA225D
Analytical balances
ME614S
ME414S
ME254S
CPA324S
CPA224S
CPA124S
CPA64
ED224S
ED124S
CPA1003S
CPA1003P
CPA623S
CPA423S
CPA323S
CPA223S
CPA2202S-DS
CPA5202S-DS
ED623S
ED423S
ED323S
ED153
Precision balances
26
Extend ED
All models listed are
also available in –CW
versions
Sartorius Density Determination
The Optimal Equipment for All Methods
Whether you use the buoyancy method,
the displacement principle or the
pycnometer method for determining the
density of solid, powdery or liquid samples
– Sartorius offers you the technical equipment for performing these applications
simply, quickly and precisely.
The integrated application software
controls the measurements and
evaluates them for you
The application software integrated into
the balances of the ME and Cubis series
provides you with the ultimate in user
convenience.
These include:
– Analytical and precision balances
– The YDK01 or YDK01LP density
determination kits
– An integrated application program built
into the balance for density determination (standard software in all ME and LA
balances)
Just select your preferred method of measurement by menu, weigh your samples and
the balance does the entire evaluation for
you. In the process, it automatically takes
into account all important factors that
influence the measurement. For example,
after you have entered the temperature,
the balance directly calculates the density
of the selected immersion medium.
Easy to use
Nothing is more annoying in laboratory
applications than complicated operating
sequences with delicate and sensitive
instruments. This is why our density
determination kits have been built to be
especially rugged and uncomplicated.
Perfected technology and practical
accessories
Large and easily accessible sample holders
are supplied so that you can perform measurements in air or in a buoyancy medium.
The special design prevents air bubbles
from adhering, which could otherwise
distort your results.
If you weigh a substance with a density
less than that of the buoyancy medium –
forget the extra work. The specially shaped
weighing pan lets you immerse your sample
effortlessly below the surface of the liquid.
And determination of the density of liquids
couldn’t be easier than with our standardized glass plummet.
Results in black and white
A record of your results is printed out on
the interfaced data printer – if you wish,
as an ISO/GLP-compliant record.
The printout includes the following data:
– Temperature and density of the buoyancy
medium
– Weight value of the sample during
weighings in air and immersed in the
medium
– The volume and the density of the sample
Which density kit for which balance?
YDK01 density set for:
– ME models with 0.01 mg and 0.1 mg
readability
– CPA324S, CPA224S, CPA124S, CPA225D
YDK01LP density set for:
– ED models with 0.1 mg readability
YDK01MS density set for:
– Cubis models with < 1 mg readability
27
Bluetooth ® Wireless Technology*
Weigh and Communicate Wirelessly
Bluetooth® wireless technology, widely
used for laptops and mobile telephones,
offers real advantages for both measurement and data storage processes. With a
range of up to 100 meters, wireless connection of measuring stations, PCs and
peripheral devices is now completely feasible for laboratory use.
No more cables to trip over, no more cable
ducts and dust collectors, no more inconvenient restrictions when positioning
devices because infrared data interfaces
have to be connected to one another within line of sight. Not only for mobile weighing, but also for clean-room and ultraclean-room conditions or contaminated
environments, Bluetooth® wireless technology represents a practical alternative that
eliminates connection problems before
they occur.
Another major advantage of Bluetooth®
wireless technology is the ability to
connect multiple weighing stations in
individual networks.
The installation is extremely simple. This
technology uses the 2.45 GHz ISM band
(for industrial, scientific, and medical
usage). No fees are charged for this frequency, which means no added recurring
costs for the user.
Data security is a high priority in
Bluetooth® wireless technology. The data
transfer in both send and receive directions
is protected by the use of frequency hopping, and other encryption techniques are
also available. Thus, even sensitive areas are
reliably secured.
With the YBT01 module for connection to
the RS232C data interface on the balance,
and the YBT02 module for connection to the
computer’s USB port, Sartorius presents a
solution that meets the most sophisticated
requirements, with the same high quality as
our premium balances designed for use in
the chemical and pharmaceutical industries.
The communication module has a stainlesssteel housing that meets the highest cleanliness requirements optimally. All data
transfer procedures and protocols are
familiar to anyone who has used RS232C
data interfaces.
So you can say goodbye to cable problems.
All thanks to Bluetooth® wireless technology. The modules are suitable to use with any
of our premium-series ME and Cubis balances.
The equipment may be used only in the
following countries: Austria, Belgium,
Denmark, Finland, France (indoor use only),
Germany, Greece, Iceland, Ireland,
Liechtenstein, Luxembourg, the Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland, and the United Kingdom.
YBT01
Bluetooth® RS232C adapter with external antenna. Point-to-point connections only.
Transmitting power
Complies with Class 1
Supported profiles
Serial port
Data transfer rate
1,200…115,200 bits/s (can be configured by Sartorius service)
Temperature range
0… +40°C
IP protection class
IP65
Dimensions (L +B+H)
121 mm + 84 mm + 32 mm
(without antenna, cable, wall bracket)
YBT02 Bluetooth® USB adapter. Point-to-multipoint capability.
Transmitting power
Complies with Class 1
Specifications
PC software
Bluetooth® wireless technology V.1.1
Bluetooth®
Bluetooth® device driver
Bluetooth®
Operating system
Windows® 98, 2000, XP
* The brand name and logo for Bluetooth® wireless technology are owned by Bluetooth SIG Inc., USA.
The use of this trademark by Sartorius is under license.
28
Eliminate Static Electricity Quickly and Reliably
Static electricity can block the entire workflow of everyday lab routines. When samples are weighed, particularly non-conductive sample materials such as plastic, glass
or porcelain, an electrostatic field may
build up between the sample and the stationary parts of the balance. As a rule, this
effect is seen when the digits of a weight
readout seem to “race out of control.” This
makes reliable weighing, particularly in the
analytical field, very difficult. By ionization
of samples using the Sartorius StatFan or
StatPen ionizing blower, static electricity
is neutralized within just a few seconds,
making it unnecessary to increase the
humidity of the air. Elimination of static
electricity can be performed instantly
wherever needed, without any time delay.
Sartorius ionizing blowers can be used
anywhere undesirable electrostatic charges
are generated; for example, in production
areas and photographic labs. The flow rate
of the ionizing stream can be continuously
adjusted. For StatPen, the flow rate is
altered by moving it closer or further away
from a sample.
Specifications
Power
connection
AC adapter
Neutralization
Airflow
Weight
230 V/50 Hz
18 V/50 Hz
Up to ± 20 V
Up to
1,000 ccm/min
approx.
0.6 kg
Ionizing
blower
StatFan
YIB01-0UR
110 V/50 Hz
18 V/50 Hz
Up to ± 20 V
Up to
1,000 ccm/min
approx.
0.6 kg
StatPen
YSTP01
100 V… 230 V
50 … 60 Hz
Ionizing
blower
StatFan
YIB01-0DR
Up to ± 30 V
approx.
0.8 kg
29
Sartorius Pipette Calibration
Totally Accurate, Efficient and Independent
Save time and money
Pipettes are gauges used as inspection,
measuring and test equipment. GLP guidelines and ISO standards require pipettes to
be tested at defined intervals to ensure
their continued proper functioning. Quick
testing must also be performed between
these intervals. Having pipette calibration
performed externally can be expensive and
time-consuming. Backup pipettes must also
be available to maintain routine operations. The equipment for performing the
oft-required quick tests is not even available in many cases.
Now you can calibrate your pipettes yourself quickly and inexpensively with the GPC
Pipette Calibration Balance or YCP03-1
Pipette Calibration Kit from Sartorius.
GPC65-CW
GPC26-CW/GPC225-CW
Procedure
The liquid taken up in the pipette is
weighed on a balance. The volume of the
liquid is calculated from its weight and
density and compared with the nominal
volume for the pipette. The balance transmits the weight value to the PC where all
the required calculations are performed –
for example, by the Picaso software. At the
end of each measurement, the calibration
results are printed as a GLP-compliant
report. The installation of an evaporation
trap maintains the humidity at 60–90 %,
thus preventing loss of liquid from the
pipetting vessel.
GPC Pipette Calibration Balances
Fast and user-friendly
The balances in the GPC series are ideally
suited for gravimetric testing of the
volume of any pipette size.
Because these balances do not require an
additional draft shield, opening and closing
of the draft shield doors is eliminated.
This saves considerable time.
The calibration workstation’s modular
design can be optimally adapted to your
lab staff’s ergonomic needs.
“On the go” pipette calibration
With the optional YDB01WZA carrying
case, you can pack up your GPC pipette
calibration balance along with the other
accessories.
Ambient conditions permitting, you have
everything you need to calibrate your
pipettes directly at the place of use.
Equipment supplied
– Weighing cell with separate electronics box
– Display/service unit with 1 m cable
(GPC65-CW: 0.3 m cable)
– Motorized calibration and adjustment
function with built-in calibration weight
– Bidirectional RS232 data interface port
– Leveling feet and level indicator
– AC adapter
– Pipette calibration kit consisting of:
– Evaporation trap
– Pipetting vessels 6 ml and 21 ml
(3 of each)
– Special adapter and reduction fittings
for pipetting vessels
YDB01WZA
– Cable for connecting the balance (RS232)
to a PC (USB)
Overview of GPC models
30
Model
capacity
Readability
Weighing capacity
Pipetting weighing
GPC26-CW
0.001 mg
20 g
0.001 mg – 8 g
GPC65-CW
0.01 mg
60 g
0.01 mg – 35 g
GPC225-CW
0.01 mg
220 g
0.01 mg – 195 g
Optional accessories
Order number
PICASO pipette calibration software (PC running Windows
operating system 98/2000/NT or XP required)
YCP03-2
Draft shield and 50 ml stainless-steel vessel
(for GPC65-CW and GPC225-CW only)
YDS01WZA
Carrying case for mobile use
YDB01WZA
Pipette calibration kit YCP03-1
Optimize your pipette calibration
With the YCP03-1 Pipette Calibration Kit,
you can save time, money, and organizational effort. Of course, you need to choose
the best balance for your needs to benefit
from all these advantages.
If you need a balance for other uses
as well …
… the Sartorius microbalances and semimicrobalances are the right solution for you.
You can turn your balance into a pipette
calibration workstation – and then back
into an ordinary balance again – quickly
and easily.
Equipment supplied
– Picaso program CD
– Evaporation trap
– Weighing system adapter
– Vessel adapter for 21 ml vessels
– Reduction fitting for 6 ml pipetting vessel
Picaso system requirements
Picaso requires a PC running Windows®
95|98|NT|2000|XP with an RS232C interface port for the interface cable, 64 MB
RAM and at least 20 MB available hard disk
space.
Overview of Picaso software
performance features
– Measurement data saved at a click of the
mouse
– Program includes presaved specifications
of more than 450 pipette types
– Measurements in accordance with British
Standard, ASTM and EN ISO 8655
– Individual pipettes inventoried
– Data records are GLP-compliant and
include mean, (in)accuracy, (im)precision,
and standard deviation
– Statistics displayed in graphs
– Time-controlled functions for monitoring
calibration cycles
– Online help for all functions
– Pipetting vessels 6 ml and 21ml (3 of each)
– Connection cable for balance – computer
– Centering disk for the evaporation trap
PICASO pipette calibration software
– Carrying case
Overview of balance models
ME235P-SD
Model*
Readability (mg)
Weighing capacity (g)
ME36S (VF3677 required)
0.001
31 (16 g**)
ME5 (VF988 required)
0.001
5
CPA26P (VF3604 required)
0.002|0.01
5|21
ME235S
0.01
230
CPA225D (VF2396 required)
0.01|0.1
100|220
ME235P
0.01|0.02|0.05
60|110|230
ME235P-SD (with short-design draft shield)
0.01|0.02|0.05
60|110|230
Accessories
ME5 with VF988
Order number
Pipette calibration kit incl. PICASO pipette calibration software
(for all of the above-named balance models, except ME5)
YCP03-1
Short-design draft shield and adaptation of YCP03-1 for CPA225D
VF2396
Adaptation of YCP03-1 for ME36S
VF3677
Adaptation of YCP03-1 for CPA26P
VF3604
Special pipette calibration kit for ME5 consisting of:
Draft shield, evaporation trap, vessel adapter and pipetting vessel (2.5 ml) VF988
* Models ME235S, ME235P, CPA225D, ME5 and ME36S are also available in versions calibrated for legal
metrology.
** Weighing capacity with pipette calibration kit installed: 16 g
31
OEM Products
32
Do you need a weighing sensor for your
applications?
Sartorius offers excellent and precise sensors for mass determination. Whether you
need to count small parts or batch precise
amounts of liquids and solids, we have the
right sensors for your solution.
The table below shows the range of OEM
products available, with details on weighing capacities and readabilities. The possibilities go beyond what you see here – in
close cooperation with you, we can also
develop customer-specific solutions adapted to individual requirements.
In addition to monitoring and filling, our
weighing cells are used in a variety of
application areas, from tensiometers and
thermogravimetric systems to checkweighers and special balances, to name
but a few.
Contact us and we’ll advise you on all the
possibilities.
Weighing
capacity
(g)
Readability
Models
(mg)
Individual
components
without CE
mark
Encapsulated components
with CE mark
Explosionprotected
IP20
0.5 … 2
0.001 …0.005
WZ2P-CW
20
0.001
WZA26-CW
60
0.01
60
0.1
WZ64S
60
0.1
WZ64-CW
60
0.1
60
0.1
120
0.1
WZ124S
120
0.1
WZ124-CW
120
0.1
180
0.1
210|80
0.01|0.1
WZ215-CW
210
0.1
WZ214S
220
0.01
220
0.1
220
0.1
600
0.1
320
1
520
1
620
1
1,000
10
1,200
1
2,000
20
6,200
10
8,200
10
10,000
100
12,000
100
20,000
200
Optional
built-in
calibration
weight
IP44
IP44
IP65
WZA65-CW
WZA64
...-CW
WZA64-X
WZA124
...-CW
WZA224-ND
WZA225-CW
WZ224-CW
WZA224
...-CW
WZ323
WZA323
...-CW
WZ523
WZA523
WZ614-CW
...-CW
WZA623-X
WZG1
WZ1203
WZA1203
...-CW
WZG2
WZA6202-X
WZ8202
WZA8202
...-CW
WZG10
WZ12001
WZA12001
WZA12001-X
WZA224-ND
WZG20
Examples of order number combinations
WZ523
Weighing cell with individual components without built-in calibration weight
WZ523-CW
Weighing cell with individual components with built-in calibration weight
WZA523
Weighing cell with encapsulated components without built-in calibration weight
For more information on our weighing systems, visit our website:
http://www.sartorius.com/index.php?id=1215
33
Moisture and
Water Content
Measurement
35
The Right Equipment for Any Application
Foods, chemical/pharmaceutical
products, building materials or
animal feed – you name it, the
moisture or water content has a
decisive impact on price, processability and quality, ranging from
raw materials to final products.
Determining this moisture content is one of the most common
analyses in product development
and in the manufacturing process.
Here, the most diverse requirements on speed, resolution of the
values measured or on the operating design of the moisture analyzers must also be considered in
all cases. As a leading provider of
moisture analysis equipment,
Sartorius is thoroughly familiar
with the needs of its customers
and thus offers a wide range of
equipment that is continuously
being enhanced.
Infrared drying – fast and
precise
A fast alternative to the classic
oven drying method, infrared
dryers from the Sartorius series of
Moisture Analyzers are being
increasingly used. These analyzers
are compact and designed for
routine operation in production
and in applications involving
incoming inspection. They feature
the resolution of an analytical
balance, and are ideal for research
and development. Moreover,
these moisture analyzers are
supplied in versions with an EC
type-approval certificate for use
in legal metrology. Sartorius
offers a custom solution for
nearly every requirement. A wide
selection of infrared heat sources,
such as a halogen lamp, a CQR
quartz glass heater and a ceramic
heating element, enable these
moisture analyzers to be
optimally adapted to the
intended application.
36
Microwave drying
If the sample contains a large amount of
water, microwave drying is the fastest and
most effective sample heating method.
It takes just 40–120 seconds to vaporize
the water out of the sample. If under normal pressure conditions, the temperature
of the escaping water vapor measures
slightly over 100°C during the heating
process. As such, this method is comparable
to the 105°C setting in a classic oven dryer.
The new PMD300 series can analyze
moisture levels online, meaning that
the analysis is performed and the results
passed to the processing unit continuously.
Highly sensitive sensors integrated in the
production line constantly analyze
moisture content and send the information
to the processing unit, which is directly
connected to the controller, ensuring that
the entire process is constantly controlled
and documented – and 100% automatic.
Differential weighing
If the oven drying method is absolutely
essential, the differential weighing program of the LA Reference series of balances efficiently manages large volumes
of data and automatically calculates the
differences between the tare weight, initial
sample weight and backweight.
NIR Technology
Optical or spectroscopic methods exploit
the interaction between light and the
sample. If light is directed onto a sample,
part of that light is reflected, changing it
characteristically. The resulting change
in the light is then used to calculate the
moisture content. NIR spectroscopy is
a nondestructive technology, meaning
that the samples can be used for further
analyses. In addition, NIR spectroscopy is
fast, reliable and precise.
Coulometry –
selective detection of water
If you need to determine not the moisture,
but the water content of a sample, the
coulometric Karl Fisher titration method is
the most commonly used technique. A further advancement in KF filtration is the
combination method incorporated in the
Water Detection System WDS 400. The
WDS 400 allows accurate measurements to
be performed down to a detection threshold of 1μg of water. At the same time, it
enables quantitative differentiation among
surface water, capillary water, and water of
crystallization. In addition, the WDS 400
completely eliminates the need for the test
reagents required in KF titration.
Microwave Resonance Technology
The microwave resonance method offers
the advantage of particularly fast measurement, well below one second. At the same
time, it is non-destructive, which means
that this versatile method can be used in
the laboratory and for online and offline
applications.
The basis of this new Sartorius product line
is the LMA300P, a modular system that
consists of a control and evaluation unit
and a resonator module in which the moisture of a sample is measured. Applications
for the system cover measurement of the
moisture in pourable, granulated and
viscous products with a moisture content
between 0.1– 60%.
The LMA500 NIR calibrator is the first in
our new NIR spectroscopy series. It not only
analyzes moisture content, it can also do
on-site calibration, allowing adaptation
of methods to the materials being tested at
a given time. The NIR calibrator is designed
for pourable and granulated substances
with a moisture content between 0.1%
and 50%, depending on the sample.
Sartorius MA35
Easy ... Very Easy!
The MA35 is the new basic model in the
moisture analyzer series from Sartorius.
Its performance functions and operating
concept are geared toward daily routine
processes such as repetitive QC monitoring
of samples as performed during in-process
control and incoming goods inspection. To
make the MA35 even more user-friendly,
we have done away with seldom-used programming options without compromising
flexibility or measurement accuracy.
No need for programming
End-point determination is fully automatic.
It is no longer necessary to program a shutoff parameter. The MA35 continuously
monitors the drying process and stops the
measurement as soon as the sample has
reached a constant weight – i.e., when no
more weight loss can be detected despite
heating. A built-in weighing system provides the measurement accuracy required
for this with 1-mg resolution that is optimized for use in high temperature ranges.
For sample heating, the MA35 is equipped
with two powerful metal tubular-shaped
heating elements, providing 360 watts of
power. These heating elements, also called
dark radiators, are both rugged and
durable. Compared to heating lamps made
from glass, e.g. infrared lamps or halogen
heaters, these are especially resistant to
dirt and vibration. In addition, the MA35's
metal heating elements can be used in
accordance with the strict guidelines of the
FDA and HACCP in cases where glass is prohibited in certain production processes.
Easy-to-understand and
error-free moisture analysis
The operating design focuses on accuracy
and ease of use. The concise display shows
the user all important information at a single glance. Easy-to-understand icons guide
you in three steps from taring the sample
pan to starting the measurement. The
MA35 has done away with the regular
Program Selection menu, opting instead
for a limited number of drying routines
that can be saved in the non-volatile memory. All important operating parameters
can be accessed and changed in seconds,
giving you more flexibility.
The optional printer, YDP20-0CE, enables
you to print analysis results on a short
report to save on paper usage. If you need
comprehensive documentation, you can
also print out the sample analysis results as
well as the weighing system and temperature calibration as a detailed GLP report.
37
Sartorius MA150. The Compact Class With Maximum
Performance and Minimum Space Requirements
For routine operation
A rugged design with low space requirements and easy operation are the major
features of the MA150. Fully automatic
drying of a sample until a constant weight
is reached eliminates the need for programming an endpoint shutoff parameter.
Twenty drying routines can be saved to
give you the flexibility you need when the
moisture content of additional, “out-ofthe-ordinary” samples of material has to be
measured.
Halogen lamp
Ceramic heating element
CQR quartz glass heater
38
Customizable and fast
Sartorius offers you a choice of two
different moisture analyzers that cover
diverse requirements on moisture measurements. Whichever heat source you opt for,
both analyzers deliver results within just
minutes. For temperature- sensitive samples, a ceramic heating element ensures
especially gentle heating over the entire
surface. The other choice, a CQR quartzglass heater, optimizes the analysis time
even further, which is already ultrafast for
the analyzer featuring the ceramic heater.
Application-specific solutions
Practical accessories round off the entire
line-up of Sartorius moisture analyzers.
These include, for instance, an in-use dust
cover that is included with the standard
equipment supplied and a special version
of the moisture analyzer without openly
accessible glass components in compliance
with the stringent FDA and HACCP requirements that ban the use of glass in production.
Sartorius MA100. Analytical Precision,
Combined with Flexibility and Dynamics
As accurate as an analytical balance
The MA100 is the first infrared dryer in the
world that features a built-in weighing
system with 0.1-mg resolution and an EC
type-approval certificate. A motorized
heating unit moves over the sample to
open or close the sample chamber. This
reduces interfering effects when a sample
is placed on the pan or a measurement is
started. The pacesetting design enables the
MA100 to achieve a measuring accuracy
well beyond that provided by conventional
infrared dryers.
Automatic adaptation to
reference values
The acronym “SPRM” stands for “Swift
Parameter Adjustment to a given Reference
Method.” This function enables the operating parameters of MA100 to be adapted
to the results of an available reference
method and to be saved as a drying routine. Optimization of operating parameters
doesn’t get any faster than this.
Flexible and modular
The Sartorius MA100 analyzers give you
a choice of three different infrared heat
sources: a halogen lamp for standard applications, a ceramic heating element for
gentle heating of temperature-sensitive
samples and a CQR quartz glass heater.
The CQR combines the fast drying capability of a halogen lamp with the gentle heating capability of a ceramic heater for drying samples evenly over their entire
surface. A printer that can be optionally
integrated into the housing eliminates the
tangle of cables so typical of an external
printer, and helps tidy up your work area.
A clean solution
Did you accidentally spill a sample? Are
there spatters of grease inside the sample
chamber? No problem with the MA 100.
The Plug & Dry® feature enables you to
easily slide out the cover with the heater
for thorough cleaning, without the risk of
cleaning agent entering the inside of the
housing.
39
Specifications
MA35|MA100|MA150
MA35
MA100
MA150
Max. weighing capacity (g)
35
100
150
Accuracy of the weighing system (mg)
1
0.1
1
Weighing system with EC type-approval
certificate
•
Repeatability, average (%)
– for initial sample weight approx. >1 g
– for initial sample weight approx. >5 g
± 0.2
± 0.05
± 0.1
± 0.02
± 0.2
± 0.05
Readability (%)
0.01
0.001
0.01
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Display mode for results
– % moisture
– % dry weight
– % RATIO
– g residue
– g/kg residue
– g/l residue
– mg weight loss
– Calculated value (measured value + factor)
Temperature range and settings
– 40°C–160°C, adjustable in 1-degree increments
– 30°C–230°C, adjustable in 1-degree increments
– 40°C–220°C, adjustable in 1-degree increments
Heating mode
– Standard drying
– Quick drying
– Gentle drying
– Phase drying
Analysis mode
– Fully automatic
– Semi-automatic
– Timer settings
– Timer mode + fully/semi-automatic
•
•
•
•
•
•
•
1+0.1–99 min.
SPRM® mode for parameter recognition
•
•
•
Later exchange of the heating unit
by Plug & Dry®*
40
•
1–50 mg/5–300 sec.
0.1–5.0%/5–300 sec.
3+0.1–999 min.
2+0.1–999 min. +
automatic
•
•
1+0.1–999 min.
•
1–50 mg/5–300 sec.
0.1–5.0%/5–300 sec.
1+0.1–99 min.
•
Heating unit
– Ceramic IR heating element (infrared)
– Halogen lamp (infrared)
– CQR heater (coiled quartz radiator)
– Metal tubular-shaped heating element
(infrared dark radiator)
Access to the sample chamber
– via hinged, flip-up cover
– via motorized cover
•
•
•
3+0.1–999 min.
•
•
•
•
•
•
MA35
Optional version compliant with
FDA|HACCP regulations**
MA100
•
•
DLG Signam approved
•
Built-in calibration weight
Operator guidance features
– Context-sensitive menu with alphanumeric
interactive prompts and symbols (icons)
– Text input for sample identification
using soft-key prompts
– Numeric keypad for sample
identification and parameter input
– Parameter input using soft-key prompts
MA150
•
•
•
•
•
•
reproTEST for determining the
repeatability of the weighing system
•
•
•
•
Number of program memories
1
30
20
Memory for data storage
– Statistics of the last 9,999 measurements
– End point up to the next moisture analysis run
•
•
•
•
Parameter settings password-protected
against unauthorized access
•
•
Manual input of tare weights
•
Data printer
– Integratable (optionally retrofittable)
– External (optional)
Printout
– GLP-compliant, user-configurable
– GLP-compliant, inalterable standard
configuration template
– Short record
Data interface port
– RS-232C unidirectional
– RS-232C bidirectional
•
•
•
•
•
•
•
•
•
•
•
Bar code scanner can be connected
•
In-use dust cover for keypad
•
•
Power consumption (VA)
max. 400
max. 700
max. 700
Housing dimensions (mm) W+D+ H
224 +366 + 191
350+453 +156
213+320 +180.5
Weight. approx. (kg)
5.8
8.0
5.5
* Does not apply to the CQR heater
** Not available with halogen lamp or CQR quartz glass heater
41
Accessories
MA35|MA100|MA150
Accessories
MA35
MA100
MA150
Disposable sample pans, 80 units,
Aluminum, round, d 90 mm
6965542
6965542
6965542
6906940
6906941
6906940
6906941
6906940
6906941
Panel replacement set
Aluminum panels for replacing glass panels
to meet FDA|HACCP regulations (conversion kit)
YDS05MA
YDS03MA
YDS04MA
SartoCollect, Software for
communication between
moisture analyzer and PC
(including 25 Pin|9 Pin, 2 m) cable
•
•
•
Carrying case
YDB03MA
YDB05MA
Data printer
– Integratable
– External
YDP01MA
YDP20-0CE YDP20-0CE YDP20-0CE
Ink ribbon cartridge for data printer
6906918
6906918
6906918
Paper rolls for data printer,
– 5 rolls, 50 m each
6906937
6906937
6906937
Glass fiber filters, d 90 mm
for analysis of liquid, pasty and fatty samples
– Hard quality, for viscous samples, 80 units
– Soft quality with high suction force, 200 units
External calibration weight
– 100 g (E2) DKD Certificate
– 30 g ± 0.3 mg DKD Certificate
– 50 g (E2) DKD Certificate
YCW5128-00
YSS43-00
YCW4528-00
Temperature adjustment set with
manufacturer’s certificate
YTM01MA
YTM03MA YTM03MA
500 disposable pipettes
YAT01MA
YAT01MA
Are you interested in receiving more information
about our moisture analyzers?
At www.sartorius.com you will find our applications
database packed with information on which
analyzer is best for which application and which
Sartorius operating parameters are recommended.
Moreover, numerous scientific articles are available
for download as PDF files.
42
YAT01MA
43
Sartorius LMA200PM
Speed Meets Analytical Precision
If the sample contains a high moisture content, microwave drying is the fastest and
most effective thermogravimetric method
(loss-on-drying principle) for moisture
analysis. Developed for measuring moisture
content ranging from approx. 8% to 100%,
the LMA200PM performs moisture analysis
in a fraction of the time it takes for other
thermogravimetric methods. It delivers
results between approx. 40–120 seconds
on average. With a cylindrical design,
a focused emission of microwave energy
is channeled vertically through dual
apertures at the bottom of the chamber.
This concentrates the microwave energy
specifically to the sample. During the test,
a carousel spins the sample, permitting an
even distribution of microwave energy. This
prevents hot and cold spots from occurring,
a familiar problem with conventional
microwave analyzers.
Built-in analytical balance
The moist and dry weight of the sample
required for calculating the loss of moisture is measured by a built-in analytical
weighing system featuring 0.1 mg resolution. Thanks to its monolithic design
(the cell is robotically etched from a
single block), this system is particularly
suitable for use in a moisture analyzer,
because it considerably reduces zero point
drift during heat exposure when compared
with classic weighing systems.
Intelligent endpoint determination
A moisture sensor integrated in the exhaust
system of the sample chamber monitors
the progress of drying. When the measurement begins, the moisture of the air inside
the sample chamber continuously increases
as water evaporates from the sample. Once
the sample has dried and no longer releases
water, the air moisture content drops back
to its original level – a clear indication of
the end point. At the same time, the builtin weighing system monitors the weight
progression and confirms when the
sample reaches a constant weight. This dual
monitoring system ensures optimal moisture analysis results.
44
High speed
Two factors play a major role for ultra-fast
measurements. First, the sample must
absorb microwave energy within the shortest time possible and transform it into heat
energy. For this purpose, the LMA200PM
has a cylindrically shaped sample chamber
that focuses the microwave radiation on
the sample optimally. Second, the resulting
water vapor must be transported away
from the sample as fast as possible to
obtain rapid analysis results. To accomplish
this, a sample is applied to a glass fiber pad
that allows water vapor to evaporate not
only from the top of the pad and upward
through the sample, but also from the bottom of the pad. An exhaust system draws
water vapor out of the sample chamber,
thus preventing the effects of condensation.
Specifications|Accessories
LMA200PM
Model
LMA200PM
Weighing capacity (g)
70
Measuring accuracy of the weighing system (g)
0.0001
Reproducibility on average
Initial sample weight starting at approx. 1 g (%)
± 0.05
Sample carriers
90 mm Ø (31”) glass fiber pads
Display modes
% moisture, ppm moisture, % volatile components, % dry weight (solids),
ppm dry weight, g dry weight, mg loss on drying, % RATIO
Measuring range
Approx. 8–100% moisture
Sample heating
– Microwave generator with 1000 W input power
Power control for heating
– 2–100%, adjustable in 1% increments
Endpoint determination
– Fully automatic, by means of weight and moisture sensors
– User-defined as loss of weight/time:
1–50 mg/ 1–99 sec.
0.1–9.9 %/ 1–99 sec.
– Timer mode: 0.1–99.9 min.
Analysis time (in seconds)
Approx. 40–120 (depends on sample and moisture)
Programs
320, saved to non-volatile memory
Data printer
Thermal printer, built-in
Moisture analysis report
– User-configured GLP record
– The report can be printed on non-fading paper by
the built-in thermal printer.
Operator guidance
– Menu-driven, alphanumeric dialogue text
(English, French, German, Italian and Spanish selectable)
– 5 pre-programmed function keys
Data interfaces
– 1 + RS-232 port for PC
– 1 + Ethernet port
Housing dimensions W x D x H (mm) | (in)
510 + 535 + 304 | 20 + 21 + 12
Weight, approx. (kg) | (lbs)
22 | 48.5
Power consumption (VA)
1200 max.
Accessories
Order no.
200 glass fiber pads
6906941
500 disposable pipettes
YAT01MA
5 rolls of printer paper, each with 20 m
69M30100
45
Sartorius LA Reference
Efficient Management of Backweighing Data
Management of extensive weighing data,
such as those generated, for instance, in
the classic oven drying method, is a powerful feature of the differential weighing
function in the Sartorius LA Reference
series of balances. For up to 999 samples,
these balances save the tare weight, initial
sample weight and the backweight, and use
these data to calculate the final result.
46
It does not matter in which sequence
the measured data are logged –
LA Reference adapts to the individual
needs of the user. A printout of all weights
on the optionally available YDP20-0CE data
printer is generated according to the
sequence of the sample numbers.
Specifications|Accessories
LA Reference*
Model
Readability
Weighing capacity
LA120S
0.1 mg
120 g
LA230S
0.1 mg
230 g
LA230P
0.1|0.2| 0.5 mg 60|120
230 g
LA310S
0.1 mg
310 g
LA130S-balance for weighing filters
0.1 mg
150 g
LA1200S
0.001 g
1200 g
LA620S
0.001 g
620 g
LA220S
0.001 g
200 g
LA2000P
0.001|0.01g
1010|2000 g
LA620P
0.001|0.002|0.005 g
120|240|620 g
LA5200D
0.001|0.01g
1010|5000 g
LA3200D
0.001|0.01 g
1000|3200 g
LA6200S
0.01 g
6200 g
LA8200S
0.01 g
8200 g
LA4200S
0.01 g
4200 g
LA2200S
0.01 g
2200 g
LA820
0.01 g
820 g
LA420
0.01 g
420 g
LA2200P
0.01|0.02|0.05 g
400|800|2200 g
LA5200P
0.01|0.02|0.05|0.1 g
1200|2400|3800|5200 g
LA8200P
0.01|0.02|0.05 g
2000|4000|8200 g
Performance features of the differential weighing program
– Memory capacity for 999 samples in up to 100 lots
– Alphanumeric input of lot and sample names
– Taring, sample weighing and backweighing with up to 30 backweighs per sample
– Automatic and manual weight storage
– Evaluation of results with residue and loss (weight unit and %), calculation factor, RATIO values
– List function with display pages for lots, samples, measured values and results
– Statistical evaluation with statistics display page
– Printout as individual, backweighing or statistics record
– User-specific, configurable printout
– Interface port for bar code scanner
* Models will be phased out in October 2009
47
Moreover, all LA Reference balances offer the following features:
– Backlit graphic display with full text support and variable digit sizes
– Fully automatic calibration|adjustment function, isoCAL
– Memory for ISO|GLP-compliant calibration|adjustment records
– 4 user-programmable lines, e.g., for entering the company’s address
– Standard equipped with application programs for counting, weighing in percent,
checkweighing, animal weighing, formulation, totalizing, calculation of weight
values, density determination and statistics, time-controlled functions, such as
automatic data printout at intervals according to a preset time
Accessories
Order No.
Data printer with date, time, statistics functions
YDP20-0CE
Ink ribbon cartridge for data printer
6906918
Paper rolls for data printer, 5 rolls, 50 m each
6906937
48
Sartorius WDS 400. Selective Detection of Surface Water,
Capillary Water and Water of Crystallization
By coulometry, i.e., by an electric current
generated at the ceramic disc, phosphoric
acid is broken down into phosphorus pentoxide P2O5, hydrogen H and oxygen O.
Based on Faraday’s law, it is known how
much current is necessary in order to split
off all hydrogen atoms from a chemical
compound. Thus, the WDS 400 uses the
amount of electric current to calculate the
quantity of water driven out of a sample.
Water, not moisture
Thermogravimetric methods, such as the
oven drying method, use the weight loss of
a sample to determine the total content of
all volatile components and not, however,
the pure water content. As a rule, the latter
task is performed using electrochemical
techniques that are based on the principle
of coulometry (coulomb = electric charge).
The most commonly known methods are
coulometric Karl Fisher titration for solid
and liquid samples and the phosphorus
pentoxide method for trace analysis of
gases. However, both methods require
complicated equipment; moreover, KF
titration necessitates the use of additional
chemicals in order to perform an analysis.
The WDS 400 Water Detection System from
Sartorius combines these three standard
methods into a high-resolution and easy
procedure for selective detection of water
in solids and pastes.
Highly accurate and selective
This combination method works so accurately that it is even possible to detect one
single microgram of water. Beyond that,
the WDS 400 enables water fractions to be
differentiated according to surface water,
capillary water and water of crystallization
(the latter is chemically bound water).
Easy operation
All the user has to do is just weigh-in a
sample. The WDS 400 does not require
any complicated handling of detection
reagents, many of which are toxic.
For measurement of the water content,
the user can choose the type of carrier gas,
either nitrogen (Class 5.0) or room air. For
using room air, the WDS 400 has a built-in
pump and a drying unit.
Get all three in one
The WDS 400 adopts the principle of
convection heating from the oven drying
method in order to drive out the entire
moisture from a sample. A ceramic disc
coated with extremely hygroscopic phosphorus pentoxide P2O5 completely absorbs
the water from the resulting gas mixture
and bonds water molecules to phosphoric
acid H3PO4 on the disc surface in a
chemical reaction.
Dry
nitrogen
Oven up to 400°C
Nitrogen + H2O
r
P2O5 H2O
cell
r
r
Electronics
r
Dry nitrogen with
H2 + O2
l
r
Balance
r
PC
Printer
49
Specifications|Accessories
Water Detection System WDS 400
Specifications
Moisture analysis method
measurement
Thermal analysis followed by coulometric
Sample heating in the built-in
stainless steel oven (convection heating)
From room temperature up to 400°C;
adjustable in increments of 1°C
Detection limit
1 μg of water
Reproducibility
±2% of the absolute water value measured
(depends on sample)
Measuring range
1 ppm to approx. 40% water
(depends on sample)
Sample weight, average
15–2,000 mg
Display
ppm/% and μg water, mA current
Analysis time
Average: 10–20 min|adjustable in increments
of 1 min–10 h
Operator guidance|Software
English, for PCs with Windows® 2000 | NT | XP
Data storage
On the hard drive of the interfaced PC
Number of measuring programs
Limited only by the PC’s hard drive memory
Power supply
115|230 V ±10 %
Frequency
50 … 60 Hz
Carrier gas
– Dry room air (using integrated air pump
with molecular sieve)
– Nitrogen, N2 (Class 5.0)
Gas prepressure
1 bar (15 psi)
Gas consumption
100–200 ml/min
Power consumption
Standby 100 W|At full power 600 W
Dimensions (W+D+H)
500+500 +180 mm
Weight
20 kg
Accessories
50
Regeneration kit for electrochemical cell
69MA0224
Calibration standard
69MA0225
PTFE particle-removing filters starting
from serial no. 19070049
69MA0226
PTFE particle-removing filters up to
serial no. 19170000
69MA0292
Nickel scoops for weighing samples
69MA0228
Electrochemical cell, uncoated
69MA0232
Molecular sieve for drying unit
69MA0293
Flexible gas tubing, stainless steel,
for external gas supply, approx. 2 m
69MA0229
Recommended balance models
Semi-microbalances ME235S
ME235P
CPA225D
Weighing range
structure
PolyRange
DualRange
SuperRange
Weighing capacity (g) 230
60|110|230 80|100|220
Readability (mg)
0.01
0.01|0.02|
0.05
0.01|0.1
Microbalances
SE2
ME5
ME36S
CPA2P
Weighing range
structure
SuperRange
SuperRange
SuperRange
PolyRange PolyRange
Weighing capacity (g) 2.1
5.1
31
0.5|1|2
5|21
Readability (μg)
1
1
1|2|5
2|10
0.1
CPA26P
51
Sartorius LMA300P
Moisture Analysis in a Fraction of a Second
The LMA300P works with microwave resonance technology. In this indirect measurement method, a harmonic electromagnetic
resonator field is built up by a microwave
generator in a sensor (applicator). When
the applicator is filled with a sample, the
water in the sample interferes with the
oscillation behavior (resonance) of the
microwave, or interacts with the resonance
field, changing the height and width of the
resonance frequency peak.
Calibration
This change in resonance field is detected
by a sensor, and the analyzer CPU calculates the moisture content of the sample
based on the calibration previously
carried out. The basic analyzer calibration
required can be done by the classic oven
drying method or, of course, using an
infrared moisture analyzer from the
Sartorius MA series.
Fast measurement
The microwave resonance method offers
the advantage of particularly fast measurement in under one second. At the same
time, it is non-destructive, which means
that samples can be further used for subsequent tests. Changes in the color and
surface structure of the sample, as is frequently the case, for instance, in natural
raw materials, does not have any effect on
calibration or thus on the measured result,
unlike near infrared spectroscopy. The
microwave resonance method is not limited
to measurement of the surface moisture;
rather, it also determines the core moisture
thanks to its operating principle.
Application areas
The LMA300P can be used for nearly all
pourable and granulated products as well
as viscous liquids, such as whitewash and
other similar materials. The measuring
range is between approx. 0.1–60% moisture. The prerequisite for operating the
analyzer is to calibrate measurements on
the basis of a measurement procedure providing absolute accuracy. The major application area for the LMA300P is incoming
and in-process quality control.
Design
The LMA300P is a modular-designed
system consisting of a control and evaluation unit, LMA300PA, and a resonator
module. This type of modular design allows
a different resonator type to be used (available on request), and enables the analyzer
to be easily adapted to customer-specific
applications.
Integrated
computer
Microwave
generator
Sensor
52
Resonator
Sample
Specifications|Accessories
LMA300P
Specifications*
Measuring range (%)
Approx. 0.1–60
Readability (%)
0.01
Measuring accuracy (%)
(depends on calibration and type of sample)
± 0.05
Measuring time (s)
<1
Display
% moisture, % dry weight (solids)
Measurement method
Microwave resonance technology
Allowable sample temperature (°C)
Approx. 0–70
Operator guidance
Touch screen with demand-driven menu based on alphanumeric prompts
(dialogue text and symbols)
Memory for number of
measurement programs
40
Data printer, optional
External
GLP-compliant report
Yes, with optionally available printer, YDP20-0CE
Interface port
2 + RS-232 C for printer and PC
USB port + 128 MB USB flash drive
Line voltage
110–230 V AC
Frequency
50 ... 60 Hz
Power consumption
60 VA max.
Housing dimensions (in mm) W + D + H
Control unit, LMA300PA
500+430 +200
Weight approx. (kg)
Control unit, LMA300PA
11.5
* * In addition to the LMA300PR sensor module, other sensors are also available on request. Depending on the desired application,
however, the technical specifications will have to be agreed on with a Sartorius applications technician.
Optional Accessories
Order no.
Data printer
YDP20-0CE
Ink ribbon cassette for YDP03-0CE
6906918
Printer paper, 5 rolls, each with 50 m,
for YDP03-0CE
690693
Applicator, 60 mm
69MA0294
Applicator, 140 mm
69MA0295
Reference standard
LMA301SY
Sensor Specifications
LMA300PR
Dimensions (mm)
370+245+275 370+245+275 370+395+375 260+270+280 370+385+375
Weight
10 kg
10 kg
11 kg
5 kg
15 kg
Sample volume
(60/150) ml
(90/125) ml
400 ml
27 ml
2000 ml
Resonator diameter
40 mm
50 mm
46 mm
26 mm
96 mm
LMA301PR
LMA302PR
LMA303PR
LMA304PR
53
Sartorius PMD300P and PMD301P
Online Moisture Analysis in a Fraction of a Second
The moisture analysis systems from the
Sartorius PMD300 series have been
designed for online, in-process analysis.
Through the use of microwave resonance
technology, moisture content can be measured in less than one second. The system
averages the individual measurements over
a user-defined period. Then they are sent
over the appropriate interface to a PC,
switch cabinet or a PLC controller. Both
core and surface moisture content are
measured. The analysis is non-destructive
and is not influenced by the color, density
or surface characteristics of the sample
material.
Sensors
A wide variety of sensors is available for
the PMD300 series. This way, the analysis
method can be customized to the sample
and process as each situation requires.
Depending on sensor type, the measuring
range is between a moisture content of
0.1% and 60%.
Ultrasensitive planar sensors, featuring a
special ceramic surface, are especially suited for use in assembly lines or in hoppers.
Due to their compact form and high protection rating, all sensors can be used in
the food industry. The diameter of the
sensors' measuring field is between 50 mm
and 130 mm.
Bypass sensors are especially suited for
pourable or granulated products that are
transported through pipes. Intake and discharge valves controlled by the PMD301P
extract a defined sample amount, measure
it and then return it to the main current.
Optional functions also allow density to be
measured together with moisture.
A special fork sensor is available for
non-contact analysis. The sample is sent
between two sensor surfaces without it
touching the surface of the sensors.
Ex-protected versions are available for
all sensor types.
54
Applications
Monitoring and retraceability:
These versatile analysis systems can be used
in a variety of locations. For example, they
can be used in the incoming goods department to analyze raw materials continuously and document the results. Instead of
doing spot checks, the entire batch is monitored without interruption. (Meets IFS V5
requirements.)
Optimizing energy consumption:
A significant factor contributing to the
success of many processes is exact and
immediate moisture analysis. This is why
online moisture measurement is often used
in baking and drying processes. The ideal
conditions for drying and baking processes
can be met by continuously monitoring
moisture content without loss of time. The
temperature in the oven, air supply or conveyor belt speed are adjusted to the current
moisture content of the product. This lets
you save valuable energy.
Time management
Frequently, a predefined moisture content
must be reached before proceeding to the
next step in the process (batch processing).
This is possible using Sartorius' online moisture analysis systems because they measure
moisture content continuously and send
them to the controller without delay. When
the target moisture content has been
reached, the process will go on to the next
step instantaneously and automatically.
Online moisture analysis makes your
process efficient and transparent.
Specifications|Accessories
PMD300PA-000U
Evaluation unit
Dimensions
410 + 460 + 210 mm
Planar sensor specifications
PMD310SR
Weight
19 kg
Protection rating
IP 65
Material
Stainless steel
Protection rating
IP 54
Height of microwave
field over the sensor
up to
50 mm
Sensor material
ceramic
Mains connection (line voltage)
Measuring field diameter
110 mm
(110–230) V AC / (50–60) Hz / 70 VA
Sensor diameter
188 mm
Sensor height
53 mm
Weight
3 kg
Interface ports
Data
Analog output
One RS-422 port (for PC, PLC,
online computer); two RS-232 ports;
optional Profibus and Ethernet ports
2 + (0/4–20) mA
(active, potential-free)
Analog input
1 + (0/4–20) mA
Control inputs
4 + optocoupler inputs, 24 V,
e.g. for start, stop and product selection
Control outputs
5 potential-free (24 V, 0.25 A DC)
Ambient conditions
PMD311SR
Protection rating
IP 65
Height of microwave
field over the sensor
up to
70 mm
Sensor material
ceramic
Measuring field diameter
120 mm
Sensor diameter
188 mm
Sensor height
53 mm
Weight
3 kg
Temperatures
Sample temperature
0°C to +70°C autom.
temperature compensation
Ambient temperature
0°C to +40°C
Accessories
Reference standard for planar sensors
PMD302SY
PMD312SR
Protection rating
IP 65
Height of microwave
field over the sensor
up to
80 mm
Sensor material
ceramic
Measuring field diameter
130 mm
Sensor diameter
188 mm
Sensor height
53 mm
Weight
3 kg
PMD313SR
Protection rating
IP 65
Height of microwave
field over the sensor
up to
30 mm
Sensor material
ceramic
Measuring field diameter
50 mm
Sensor diameter
80 mm
Sensor height
112 mm
Weight
1.6 kg
55
Sartorius LMA500. Analyzing Moisture Content With Optics —
Quick, Reliable, Non-Destructive
The LMA500 uses spectroscopy. It exploits
the interaction between light and the sample. If the sample is exposed to near
infrared light (NIR), a part of this light is
reflected and modified characteristically on
interaction with the sample. This change in
the NIR light, which is dependent on the
water content of the sample, reveals its
moisture content.
Calibration
The LMA500 calibrates itself by analyzing
data it has collected using sophisticated
multivariate statistics (regression analyses,
approximation procedures) practically
without the need for user input or expert
knowledge. If desired, you can quickly
adjust the calibration by connecting an
MA35 rapid moisture analyzer. This allows
you to adjust to changes in sample characteristics, giving you another method for
updating your system to new batches.
Or you can create calibrations for products
that have just been added to your product
portfolio. Calibration settings for many
classes of substances are available from
Sartorius.
Verification made easy
Multivariate evaluation offers index values
for evaluating measurements. This information identifies anomalies or samples
that have been categorized incorrectly so
corrective action can be taken immediately.
Applications
The LMA500 is designed for analyzing the
moisture content of pourable and granulated products, and viscous products as
well such as slurry. It measures moisture
content within a range of approximately
0.1% – 50%. Calibration with a direct
measurement is required if you wish to use
the NIR calibrator. The NIR calibrator is
optimized for use with the MA35 moisture
analyzer. Naturally, other reference methods can be used. The major applications of
the NIR calibrator include laboratory
analysis and at-line process control.
Analysis does not modify the sample, so the
sample can still be used after measurement.
56
Design
The NIR calibrator and its measuring,
operating and evaluating components are
contained in a water resistant IP54 housing. A fiber optic cable connects the probe
so that measurements can not only be
taken in the integrated analysis area but
also at other locations, in the MA35 or
directly in the production process. Thanks
to the device’s compact design, it can be
quickly transported to other testing
locations.
Software
The LMA500’s software is easy to use and
intuitive. All data are protected. Only users
who have authenticated can access the system. User permissions can be individually
modified to suit your needs. No expert
knowledge is necessary to create, extend
or adjust calibration settings.
Specifications
LMA500PO
Spectrometer system
Spectral range
1,100 to 1,700 nm (effective: 1,100 to 1,680 nm)
A/D converter
16 bits
Spectral resolution [ΔλFWHM]
< 16 nm
Wavelength precision
< 5 nm
Signal to noise ratio
> 3500:1
Photometric linearity
Gradient: 1 ± 0.05; Axis intercept: 0 ± 0.05
Functions
Measurement range, typical
0 to 50% moisture (pourable and granulated samples)
Reproducibility, typical (%)
0.2% absolute moisture, dependent on sample and reference method
Precision of comparison, typical (%)
0.5% absolute moisture, dependent on reference method
Measurement time, typical
2 seconds
Memory capacity
1 GB for data and calibration
Sample pan dimensions
d 90 mm
Device (Hardware)
Dimensions
(W + D + H) 550 + 387 + 180 mm
Net weight, ca.
11.5 kg
Voltage
100 V to 240 V, –15% … +10%
Frequency
48–60 Hz
Fuses
2 (ground/phase), 6.3 AT, 5 x 20 mm
Power consumption
45 VA maximum
Temperature range
+10°C … +30°C
IP protection rating
IP54 (also during use); Front cover, display: IP65
Built-in interface
2+ RS232C (To connect MA35 and YDP20-OCE)
Format: 7 bit ASCII, 1 start bit, 1 stop bit
Parity: odd
Speed: 1200 baud
Handshake: hardware
Digital interfaces
1 Ethernet (RJ45): 10/100 Base-T, 1 x USB 1.1, PS/2 Keyboard
Display
Touchscreen 8.4” TFT (SVGA)
57
Mass Metrology
59
Automatic Mass Comparators and Robots
CCL1007
The fascination of precision
International trade requires the worldwide
standardization of certain measurements.
Mass plays an important role, because the
majority of commerce throughout the
world is defined by the mass of substances.
To make sure the same masses are used
around the world, each country has a
national metrology institute (NMI) that
governs units of measurement. These
institutes are the measure of all things.
Mass determination to the most
exacting standards
On behalf of and in collaboration with the
NMIs, Sartorius develops innovative mass
comparators to the highest standards.
Sartorius has mastered the core disciplines
of weighing like no other company, and
sets new standards in mass metrology. In
cooperation with the Bureau International
des Poids et Mesures and the Institute for
Process Measurement and Sensor Technology of the Technical University of Ilmenau,
Sartorius has developed a mass comparator
– the CCL1007 – that is capable of determining differences in mass to an accuracy
of 0.1 μg for weights of 1 kg – even under
high-vacuum conditions.
Our metrology experts will be happy to
advise you, offering the best solution
available to meet your needs.
Load alternator CCL1007
Automatic mass comparators and robots
CCR10-1000
Model
Maximum
load
Readability
Typical
Repeatability*
R = Robot
A = Automatic
CCL1007
1,031 g
0.1 μg
0.1 μg
A 8 positions
CCR10
10.5 g
0.1 μg
0.2 μg
R 39–104 positions
CCR1000
1,002 g
1 μg
2 μg
R 21-60 positions
CCR10-1000
10.5 g
1,002 g
0.1 μg
1 μg
0.2 μg
2 μg
R 39–104 positions
R 21-60 positions
CCE1000S-L
1.002 kg
0.001 mg
0.001 mg
A 4 positions
CCE10000U-L
10.05 kg
0.01 mg
0.01 mg
A 4 positions
CCE10000S-L
10.05 kg
0.1 mg
0.1 mg
A 4 positions
CCE20000S-L
20.05 kg
0.1 mg
0.1 mg
A 4 positions
CCE50001S-L
51 kg
1 mg
1 mg
A 2 positions
* Repeatability is the standard deviation “s”; it is calculated from 6 ABBA cycles,
after eliminating drift.
Weight grabber CCR10-1000
60
Manual Mass Comparators
Specifications
Model
Maximum load
(g)
Readability
(mg)
Typical
repeatability
(s in mg)*
Analytical range
CCE6
6.1
0.0001
0.00015
CCE36
31
0.001
0.001
CCE66
61
0.001
0.001
CCE111
111
0.001
0.001
CCE605
610
0.01
0.015
1,110
0.01
0.01
CCE1004
1,200
0.1
0.05
CCE2004
2,500
0.1
0.1
CCE5004
5,100
0.2
0.3
CCE5003
5,100
1
0.5
0.1
0.1
CCE1005
Universal range
CCE10000S
10,050
CCE10K3
11,000
1
1
CCE20000
20,050
1
1
CCE40K3
41,000
2
3
CCE60K3
64,000
2
4
CCE60K2
64,000
10
7
50
100
Research and testing range
CCI60K2
64,000
CCI100K2
151,000
50
200
CCI300K
303,000
1,000
500
CCS600K
605,000
1,000
2,000
CCT1000K
1,200,000
1,000
2,000
CCS1000K
1,510,000
5,000
5,000
CCT2000K
2,010,000
1,000
5,000
CCS3000K
3,010,000
1,000
10,000
* Repeatability is the standard deviation “s”; it is calculated from 6 ABA cycles,
after eliminating drift.
61
Accessories for Mass Determination
Density determination
Model
Maximum
load
Readability
Typical
repeatability
Volume comparator with
2 load alternators
VD1005
1,125 g
0.01 mg
0.02 mg
Volume comparator with
load alternator
VL1005
1,125 g
0.01 mg
0.02 mg
Pycnometer for weights up to 50 kg
YP50K
50 kg
Density reference: 1 kg silicon sphere
YDR1000SIC
Density reference: 500 g silicon sphere YDR500SIC
Density reference: 200 g silicon sphere YDR200SIC
Analysis of magnetic properties
Susceptometer for weights up to 50 kg YSZ01C
50 kg
10 μg
10 μg
Susceptometer for weights up to 50 kg YSZ02C
50 kg
1 μg
5 μg
Calibration kit for susceptometer
YSZ01RMC
Susceptibility reference (1 kg)
YSZ01RMC
Permeability indicator
YAW61
Software for mass determination
ScalesNet with Data Logger converter
YSN01C
ScalesNet V4, 3. and other
software licenses
YSN01LC
ScalesNet V4,
license for mass derivation
YSN01MC
Data Logger converter (RS232 LAN)
YSN01DC
Evaluation program for mass metrology YPR02C
Air density determination
Climate station for an E1 laboratory
YCM02C
Climate station for an E2 laboratory
YCM03C
Precision climate station for an
E1 laboratory
YCM05C
Draft shields
62
for CCE10000S-L, CCE10000U-L,
CCE20000S-L
YDS01C
for CCE1000S-L
YDS44C
for CCE40K3, CCE60K3, CCE60K2
YDS03C
for CCE40K3, CCE60K3, CCE60K2
YDS05C
for CCE6, SE2, ME5
YDS20C
for CCE111
YDS22C
for CCE1004, CCE2004,
CCE5004, CCE5003
YDS24C
for ME235S, CCE36, CCE66, CCE1005
YDS26C
for CCI60K2
YDS62C
for CCI100K2, CCI300K
YDS64C
for CCS600K, CCS1000K
YDS80C
for CC3000K
YDS82C
for CCT1000K
YDS85C
for CCT2000K
YDS87C
Weights and Weight Sets (YCW, YCS)
Recalibration for any brand names,
manufacturers and designs
Depending on how frequently weights are
used, they must be recalibrated on a regular basis so that they meet the requirements for reliable measuring, inspection
and test equipment. Sartorius offers recalibration service along with DKD calibration
certificates for all weights ranging from
1 mg to 50 kg, regardless of their design or
brand name, and up to 500 kg for F2 and
M1 weights.
The complete line – ranging from
weights to certified testing services
Regular inspection and testing of weighing
instruments are a must to ensure reliable
weighing results. Sartorius offers highly
accurate metrological weights and weight
sets with nominal mass values from 1 mg
to 1,000 kg, special and test weights, as
well as the accessories required for correct
handling and storage of weights.
Sartorius weights and weight sets are calibrated by the DKD* and comply with the
International Recommendation OIMLR111:
2004. They are therefore suitable for legal
and general metrological applications in
research and industry.
Here’s how to find the right test weight
Just determine the number of digits specified for your weighing instrument’s resolution, then check the graph below for the
particular accuracy class that your test
weight must have.
Sartorius weights meet the requirements
for traceability to the national kilogram
prototype in conformance with ISO
9001:2000. These weights help support
your quality management and quality
assurance systems, and fulfill GLP and
GMP requirements.
The weight value of your test weight
should be more than 80% of the maximum
capacity of your weighing instrument.
Your DKD partner for mass units
Sartorius is a DKD calibration laboratory
for both weights and electronic laboratory
balances and industrial scales. Sartorius
calibration laboratories have been inspected and accredited for compliance with the
regulations of the German calibration service, DKD, concerning mass units and meet
the DIN EN ISO IEC 17025 international
standard for test laboratories.
Use the following chart to determine
whether you need an individual weight or
a weight set by comparing the nominal
mass values.
Example: Suppose your weighing instrument has a capacity of 2,200 g and a readability of 0.01 g. This yields 220,000 digits,
which correspond to a class E2 test weight.
Since 80% of 2,200 g is 1,760 g, you need
to round it to a weight value of 2,000 g.
n = m:d
Nominal value n = resolution of your weighing instrument (digits)
Steps max = weighing capacity of your instrument
1,000,000 d = readability of your instrument
500,000
100,000
50,000
10,000
5,000
M1
F2
F1
E2
E1*
Class
* or E2, DKD-calibrated
63
Metrological Weight Sets in
Wooden Cases with Forceps*
Composition of the weight sets
Weight without marking
Weight with marking
Range
1 mg – 5 g
Total contents:
11.11 g
16 pcs
Weight sets
1 mg – 100 g
Total contents:
211.11 g
21 pcs
1 mg – 200 g
Total contents:
611.11 g
23 pcs
1 mg – 1 kg
Total contents:
2,111.11 g
25 pcs
1 mg – 5 kg
Total contents:
11,111.11 g
28 pcs
1 g – 1 kg
Total contents:
2,110 g
13 pcs
1 g – 5 kg
Total contents:
11,110 g
16 pcs
1 g – 10 kg
Total contents:
21,110 g
17 pcs
Contents
1
2
5
10
20
50
100
200
500
1
2
5
10
20
50
100
200
500
1
2
5
10
20
50
100
200
500
1
2
5
10
20
50
100
200
500
1
2
5
10
20
50
100
200
500
1
2
5
10
20
50
100
200
500
1
2
5
10
20
50
100
200
500
1
2
5
10
20
50
100
200
500
* 1 kg and up: glove included
64
mg
g
kg
Weight Sets (YCS)
Features of Sartorius weight sets
The weights contained in Sartorius weight
sets have the same features and properties
as the individual weights in the corresponding maximum permissible errors. Sartorius
weight sets are supplied in a wooden case,
along with gloves, forceps and brushes.
Service weight sets come in a plastic case
for mobile maintenance of balances and
scales.
Class E1 and E2 weight sets come with wire
weights up to 500 mg.
Class F1, F2 and M1 weight sets come with
leaf weights up to 500 mg.
Nominal mass
E1
E2
From 1 mg to 5 g
YCS011-351-0X
YCS011-352-0X
From 1 mg to 100 g
YCS011-511-0X
YCS011-512-0X
YCS01-513-0X
From 1 mg to 200 g
YCS011-521-0X
YCS011-522-0X
YCS01-523-0X
From 1 mg to 1 kg
YCS011-611-0X
YCS011-612-0X
YCS01-613-0X
From 1 mg to 5 kg
YCS011-651-0X
YCS011-652-0X
YCS01-653-0X
From 1 g to 1 kg
YCS31-611-0X
YCS31-612-0X
YCS31-613-0X
From 1 g to 5 kg
YCS31-651-0X
YCS31-652-0X
YCS31-653-0X
From 1 g to 10 kg
YCS31-711-0X
YCS31-712-0X
YCS31-713-0X
Nominal mass
F2
M1
From 1 mg to 100 g
YCS01-514-0X
YCS01-515-0X
From 1 mg to 200 g
YCS01-524-0X
YCS01-525-0X
From 1 mg to 1 kg
YCS01-614-0X
YCS01-615-0X
From 1 mg to 5 kg
YCS01-654-0X
YCS01-655-0X
From 1 g to 1 kg
YCS31-614-0X
YCS31-615-0X
From 1 g to 5 kg
YCS31-654-0X
YCS31-655-0X
From 1 g to 10 kg
YCS31-714-0X
YCS31-715-0X
Service weight set
E2
F1
From 100 g to 5 kg
YSS5128-6528-0X
From 1 g to 5 kg
F1
YSS3138-6538-0X
Options:
X = 0: weights with DKD certificate in Sartorius’s name (E2, F1, F2 – 50 kg)
X = 2: weights with DKD certificate in customer’s name
YCW02: DKD calibration certificate with customer data
65
mg Weights (YCW)
Features of Sartorius weights
Class F1 leaf weights (F2, M1 in weight sets);
individual weights available on request
1-5 mg aluminum; density 2.7 g/cm3
10-500 mg nickel silver; density 8.6 g/cm3
Knob weights
Leaf weights
Class E1 and E2 wire weights
1-500 mg special steel,
non-magnetizable
E1; density 8.0 g/cm3
E2; density 7.95 g/cm3
Nominal mass
Wire weights
Class E1
Wire weights
Class E2
Leaf weights
Class F1
1 mg
YCW0111-0X
YCW0121-0X
YCW013-0X
2 mg
YCW0211-0X
YCW0221-0X
YCW023-0X
5 mg
YCW0511-0X
YCW0521-0X
YCW053-0X
10 mg
YCW1111-0X
YCW1121-0X
YCW113-0X
20 mg
YCW1211-0X
YCW1221-0X
YCW123-0X
50 mg
YCW1511-0X
YCW1521-0X
YCW153-0X
100 mg
YCW2111-0X
YCW2121-0X
YCW213-0X
200 mg
YCW2211-0X
YCW2221-0X
YCW223-0X
500 mg
YCW2511-0X
YCW2521-0X
YCW253-0X
Options:
X = 0: weights with DKD certificate in Sartorius’s name (E2, F1, F2 – 50 kg)
X = 2: weights with DKD certificate in customer’s name
YCW02: DKD calibration certificate with customer data
Wire weights
66
Weights (YCW)
Class E1, E2, F1 and F2 knob weights
1 g to 50 kg, special steel,
non-magnetizable
E1; density 8.0 g/cm3
E2, F1, F2; density 7.95 g/cm3
M1: 1-10 kg, brass/galvanized,
shiny polished
Packaging of the weights:
up to 20 g in a plastic box
from 50 g in a wooden case
from 1 kg: glove included
Knob weights
(100 kg and up: cylindrical weights)
Knob weights
Block weights
Cylindrical weights
Nominal E1 (1)
mass
E2 (1)
F1 (1)
F2 (1)
M1 (2)
M2 (3)
1g
YCW311-0X YCW312-0X YCW313-0X YCW314-0X
YCW316-0X
2g
YCW321-0X YCW322-0X YCW323-0X YCW324-0X
YCW326-0X
5g
YCW351-0X YCW352-0X YCW353-0X YCW354-0X
YCW356-0X
10 g
YCW411-0X YCW412-0X YCW413-0X YCW414-0X
YCW416-0X
20 g
YCW421-0X YCW422-0X YCW423-0X YCW424-0X
YCW426-0X
50 g
YCW451-0X YCW452-0X YCW453-0X YCW454-0X
YCW456-0X
100 g
YCW511-0X YCW512-0X YCW513-0X YCW514-0X
YCW516-0X
200 g
YCW521-0X YCW522-0X YCW523-0X YCW524-0X
YCW526-0X
500 g
YCW551-0X YCW552-0X YCW553-0X YCW554-0X
YCW556-0X
1 kg
YCW611-0X YCW612-0X YCW613-0X YCW614-0X YCW615-0X YCW616-0X
2 kg
YCW621-0X YCW622-0X YCW623-0X YCW624-0X YCW625-0X YCW626-0X
5 kg
YCW651-0X YCW652-0X YCW653-0X YCW654-0X YCW655-0X YCW656-0X
10 kg
YCW711-0X YCW712-0X YCW713-0X YCW714-0X YCW715-0X YCW716-0X
20 kg
YCW721-0X YCW722-0X YCW723-0X YCW724-0X
50 kg
YCW751-0X YCW752-0X YCW753-0X YCW754-0X
100 kg
YCW813-0X YCW814-0X* YCW8157-0X
200 kg
YCW823-0X YCW824-0X* YCW8257-0X
500 kg
YCW853-0X YCW854-0X* YCW9157-0X
1,000 kg
YCW913-0X YCW914-00*
* Cylindrical weight with lug
Block weight, stainless steel
Nominal mass
Block weights (1)
M1
Block weights (4)
M1
5 kg
YCW6554-0X
YCW6559-0X
10 kg
YCW7154-0X
YCW7159-0X
20 kg
YCW7254-0X
YCW7259-0X
50 kg
YCW7554-0X
YCW7559-0X
Block weights (4)
M2
100 kg
YCW8159-0X
YCW6569-0X
200 kg**
YCW8259-0X
YCW7169-0X
500 kg**
YCW8559-0X
YCW7269-0X
1,000 kg**
YCW9159-0X
YCW7569-0X
* Cylindrical weight with lug for crane
** Cylindrical weight with lug for crane, stackable
Material:
(1) stainless steel, (2) galvanized brass, (3) brass, precision lathed surface,
(4) Material: gray casting, painted black
Block weight
Options:
X = 0: weights with DKD certificate in Sartorius’s name (E2, F1, F2 – 50 kg)
X = 2: weights with DKD certificate in the customer’s name
YCW02: DKD calibration certificate with customer data
67
Test Weights (YCW...8)
Features of Sartorius test weights
Stainless steel, non-magnetizable,
density 7.9 g/cm3, shiny polished;
packaging:
in a plastic screw-top can with
DKD certificate in Sartorius’s name
Test Weights
Nominal mass
E2
F1
1g
YCW3128-00
YCW3138-00
2g
YCW3228-00
YCW3238-00
5g
YCW3528-00
YCW3538-00
10 g
YCW4128-00
YCW4138-00
20 g
YCW4228-00
YCW4238-00
50 g
YCW4528-00
YCW4538-00
100 g
YCW5128-00
YCW5138-00
YCW5148-00
200 g
YCW5228-00
YCW5238-00
YCW5248-00
500 g
YCW5528-00
YCW5538-00
YCW5548-00
1 kg
YCW6128-00
YCW6138-00
YCW6148-00
2 kg
YCW6228-00
YCW6238-00
YCW6248-00
5 kg
YCW6528-00
YCW6538-00
YCW6548-00
YCW7138-00
YCW7148-00
10 kg
Option:
YCW02: DKD calibration certificate with customer data
68
F2
Accessories for Weights (YAW)
Accessories for Sartorius weights
Sartorius offers glass bell jars with a support plate, plastic cases, brushes, gloves,
forceps with silicone-coated tips, weight
forks, handles for lifting weights and a permeability indicator (for checking magnetic
properties of weights of accuracy classes
E1, E2, F1 and F2).
Forceps
Weight forks
Handles for lifting weights
Accessories
Glass bell jar
with support plate
for 1 mg – 5 g
for 1 mg – 50 g (100 g or 200 g)
for 100 g – 1 kg (2 kg)
for 2 kg – 5 kg
for 10 kg
for 20 kg
for 50 kg
Order No.
YAW00
YAW01
YAW02
YAW03
YAW04
YAW05
YAW06
Brush
small, 100 mm
medium, 115 mm
large, 150 mm
extra large, 250 mm
YAW11
YAW12
YAW13
YAW14
Pair of gloves
Cotton
Leather
YAW21
YAW22
Forceps with
silicone-coated tips
115 mm for 1 mg – 5 g
160 mm for 1 g – 200 g
230 mm for 1 g – 1 kg
YAW31
YAW32
YAW33
Weight forks
for 500 g
for 1 kg
for 2 kg
YAW41
YAW42
YAW43
Handles for lifting weights
for 5 kg
for 10 kg
for 20 kg
for 50 kg
YAW50
YAW51
YAW52
YAW53
Permeability
indicator
For checking magnetic
properties of weights of
accuracy classes (OIML R111: 2004)
E1, E2, F1 and F2; supplied in a
wooden case
YAW61
Susceptometer
Resolution 10 μg
Resolution 1 μg
For checking magnetic properties
of weights of accuracy classes
E1, E2, F1 and F2, field of application
according to OIML R111: 2004
from 2 g to 50 kg.
YSZ01C
YSZ02C
Standard susceptibility reference
1 kg
YSZ01RMC
Permeability indicator
Calibration kit for susceptometer
Plastic screw-top can for
individual weights* with closedpore insert; also suitable for clean
rooms
Susceptometer
In addition, Sartorius supplies susceptometers for easy and convenient determination
of the susceptibility and magnetization
of weights in accordance with OIML R111:
2004.
YSZ01RMC
for 50 g weights
for 100 g weights
for 200 g weights
for 500 g weights
for 1 kg weights
for 2 kg weights
for 5 kg weights
for 10 kg weights
YAW50GL
YAW100GL
YAW200GL
YAW500GL
YAW1000GL
YAW2000GL
YAW5000GL
YAW10000GL
* for knob weights only; for information on cans for cylinder weights, please contact Sartorius
Clean room weight case
69
Electroanalysis
for Laboratories
71
Sartorius DocuClip® & Docu-pHMeter
The New Standard for Reliability in Electrochemical Analysis
Reliability starts with easy and comprehensible operation. With the newly developed
Docu-pHMeter instruments, Sartorius is setting new standards in the determination
and management of measured values.
Equipped with a graphic display and easyto-use softkeys, all Docu-pHMeter models are
practical meters that make even complex
laboratory tasks simple.
You can choose between “intelligent”
electrodes connected to DocuClip® or
standard electrodes with a BNC connector.
Comprehensive features –
simple results
– Graphical display and softkeys
– Easy-to-understand menu-driven
prompts in plain language
– Defined function keys for the most
common applications; no doubleassigned keys
– Fast mode for rapid results
– Automatic recognition of the DocuClip®
– Automatic recognition of a variety of
temperature probes
– Serial interface for data transfer to
computer or printer (Docu-pH+Meter)
– Data storage capacity for 500 data
records (Docu-pH+Meter)
Give your electrodes an identity. DocuClip®
is a unique device that makes an electrode
uniquely identifiable, in just seconds.
Equipped with built-in memory for calibration data, DocuClip® works together with
the Sartorius Docu-pHMeter to store essential electrode specifications over its entire
service life.
Electrode data is logged 100% automatically in each measurement, and can be sent
to a printer or exported to a computer for
further processing.
Specifications
Temperature measurement
Docu-pHMeter
Docu-pH+Meter
Temperature measuring range in °C –5 … 105
–5 … 105
Readability in °C
0.1
0.1
Accuracy in °C
± 0.2
± 0.2
Temperature compensation
Automatic or manual from –5°C … 105°C
Buffer recognition
Automatic: technical buffers, DIN/NIST buffers
Calibration points, max. number
3
3
Date | time battery-supplied
–
+
Sample IDs
–
+
Calibration reminder
–
+
Complete GLP-compliant
record | printout
–
+
Memory for measurement data
–
+
DocuClip®
+
+
Communication with
Input for pH combination electrodes BNC
BNC
Input for temperature probes
72
NTC 10 kO, NTC 30 kO, Pt1000
2.5 mm male jack plug 2.5 mm male jack plug
RS232C interface
–
Dimensions in mm
89 + 229 + 145
Weight in kg
1
+
1
Specifications
pH measurement
Docu-pHMeter
Docu-pH+Meter
Measuring range
–2,000 … 20,000
–2,000 … 20,000
Readability
0.001 | 0.01 | 0.1
configurable
0.001 | 0.01 | 0.1
configurable
Accuracy
± 0.005
± 0.005
Measuring range in mV
–2,000.0 … 2,000.0
–2,000.0 … 2,000.0
Readability in mV
0.1 | 1 configurable
0.1 | 1 configurable
Accuracy in mV
± 0.2 < | 1,000 |
± 1 > | 1,000 |
± 0.2 < | 1,000 |
± 1 > | 1,000 |
mV measurement
Choice of Standard Features
Docu-pHMeter
Order number
Measuring instrument incl. electrode
retainer arm, technical buffers, AC adapter,
operating instructions
Docu-pH
Docu-pH+
Docu-pH | P10doc
Docu-pH+ | P10doc
DocuClip®
… with electrodes and
for unique, 100% traceable data recording
pH electrodes with plastic body, refillable,
fiber junction, NTC 10 kO
glass housing, refillable,
platinum junction, NTC 10 kO
plastic body, gel electrolyte,
fiber junction, NTC 10 kO
Plastic body, gel electrolyte,
fiber junction
Glass housing, refillable, platinum junction
… with conventional electrodes
pH electrodes with plastic body, refillable,
fiber junction, NTC 10 kO
glass housing, refillable,
platinum junction, NTC 10 kO
plastic body, gel electrolyte,
fiber junction, NTC 10 kO
Plastic body, gel electrolyte,
fiber junction
Glass housing, refillable, platinum junction
Docu-pH+ | P11doc
Docu-pH | P12doc
Docu-pH+ | P12doc
Docu-pH | P20doc
Docu-pH+ | P20doc
Docu-pH+ | P21doc
Docu-pH | P10
Docu-pH+ | P10
Docu-pH+ | P11
Docu-pH | P12
Docu-pH+ | P12
Docu-pH | P20
Docu-pH+ | P20
Docu-pH+ | P21
DocuClip®
… for unique, 100% traceable
documentation of calibration for any
pH electrodes
Initialization by the user with
Docu-pHMeter (Docu-pH+Meter) required
DocuClip®
73
Professional Meter: Multitalented Instruments for the
Most Sophisticated Measurement Tasks
pH| mV meters, ion meters, conductivity
meters. Four models – with all options to
meet the highest requirements.
– Large, backlit multifunctional 5.7” VGA
graphical display
– Measuring accuracy to ± 0.1 mV
– Automatic temperature compensation
– Menu-driven prompts in plain language
– Automatic recognition of 26 standard
buffers (inc. NIST and DIN)
– Automatic checking of your combination
electrode’s functionality
– Automatic calibration prompt
Clear functions – clear advantages
Simultaneous display of a measured value
and the temperature, also for parallel
measurements of the pH and conductivity,
for example
Research-grade – i.e. the highest –
accuracy covering a broad range of
concentrations
Excellent reliability and repeatability of the
measured results
GLP|GMP|ISO-compliant documentation
of the calibrations and results
Interface port for connecting a printer
or a PC
– Stability indicator
– Help function always available through
softkeys
PP-15 | pH meter for pH
and ORP measurements.
Higher resolution to guarantee even
greater accuracy in electrochemical
analysis.
PP-25 | pH-meter
and ion-selective meter.
In addition to convenient pH measurement,
the PP-25 features the added capability
of research-grade ion-selective analysis for
a wide range of concentrations.
74
PP-20 | pH meter and conductivity meter.
In addition to pH measurement, the
high-end PP-20 Professional Meter
offers research-grade conductivity
measurements.
PP-50 | pH meter, ion-selective meter
and conductivity meter combined in
a single unit.
The fully professional PP-50 combines all
features of the models presented in this
catalog. This convenient Professional Meter
is designed for use in a broad range of
applications in the electrochemical analysis
field.
Specifications
pH measurement
PP-15
PP-20
PP-25
PP-50
Measuring range
-2,000 …
20,000
-2,000 …
20,000
-2,000 …
20,000
-2,000 …
20,000
5
5
5
5
±2,000
±2,000
±2,000
±2,000
-5 … +105
-5 … +105
-5 … +105
-5 … +105
Measuring range
–
–
1.00 · 10-9 … 9.99 · 109
Direct potentiometric
measurement and
incremental modes
–
–
+
+
Calibration points,
max. number
–
–
7
7
–
0.5 … 20,000 –
0.5 … 20,000
Specific electrical resistance
Measuring range in O · cm –
50 … 2.0 · 106 –
50 … 2.0 · 106
Salinity
Measuring range in ppt
–
0.01 … 42.0
–
0.01 … 42.0
NaCl content
Measuring range in ppt
–
0.01 … 70.0
–
0.01 … 70.0
TDS
Measuring range in mg/l
–
0.005 …
300,000
–
0.005 …
300,000
Calibration points,
max. number
–
5
–
5
Manual temperature input
+
+
+
+
Inputs for pH combination
electrodes and ISE
BNC
BNC
2 BNC
2 BNC
Input for conductivity
measuring cells
–
DIN
–
DIN
Date and time,
non-volatile memory
+
+
+
+
Memory for
measurement data
620
620
620
620
Dimensions in mm
265 +200 + 100
Calibration points,
max. number
mV measurement
Measuring range in mV
Temperature measurement
Temperature
measuring range in °C
Ion-selective analysis
Conductivity measurement*
Measuring range in μS/cm
* Specifications based on a cell constant of 2.54 cm
75
pH|mV Meter – Reliability in All Applications
Basic Meter –
A strong basis featuring Sartorius quality
Four keys do it all!
The user-friendly prompts and messages
guide you fast and reliably through
laboratory routines.
PB-11
– Easy 1-key calibration of 1, 2 or 3
calibration points
Portable Meter –
Compact design – solid performance
It’s easy to operate anywhere in the field
where you need accurate measurements on
the spot.
Portable Meter PT-10
– Battery operation using a 9-volt battery
(optional AC adapter available)
– Waterproof according to IP65
– Automatic buffer recognition
– Easy 1-key calibration of 1, 2 or 3
calibration points
– Automatic electrode test during
calibration
– Automatic buffer recognition
– Automatic temperature compensation
– Automatic electrode test during
calibration
– Clear readout with easy-to-understand
symbols and LCD display
– Automatic temperature compensation
Three kits are available with different
ranges of equipment:
Meter with electrode retainer arm,
technical buffers, AC adapter and
operating instructions, as well as:
– Clear readout with easy-to-understand
symbols and LCD display
– Weight only 270 g
– Two kits are available with different
ranges of equipment:
– Refillable pH electrode, PY-P10, with
plastic body and built-in temperature
sensor PB-11-P10
– Refillable pH electrode, PY-P11, with
glass body and built-in temperature
sensor PB-11-P11
– Low-maintenance pH electrode, PY-P20,
with gel electrolyte PB-11-P20
Meter in a carrying case with 9-volt DC
battery, technical buffers (90 ml with pH 7
and 90 ml with pH 4), 2 x 60 ml plastic
sample containers, as well as:
– Low-maintenance combination electrode,
PY-P12, gel-filled, fiber junction, built-in
temperature sensor PT-10P
– Low-maintenance electrode PY-P20,
gel-filled, fiber junction PT-10-P20
Specifications
Basic Meter
PB-11
Portable Meter
PT-10
Measuring range
-1.99 … 19.99
0.00 … 14.00
Calibration points, max. number
3
3
-1,800 … +1,800
-1,800 … +1,800
Measuring range in °C
-5 … +105
-5 … +105
Input for pH combination
electrodes
BNC
BNC
Protection class
–
IP65
Power supply
AC adapter
9V battery
or AC adapter
Dimensions in mm
230 +120+ 80
165+95+33
Weight
1,390 g
270 g inc. battery
pH measurement
mV measurement
Measuring range in mV
Temperature measurement
76
Sensors for the Highest Measuring Quality
1|
2|
pH| ATC combination electrodes – glass membrane electrodes
All pH combination electrodes have an Ag | AgCl reference. The electrodes are supplied
with a fixed cable and BNC connector; electrodes with a built-in temperature sensor
additionally have a 2.5 mm male jack. All models are optionally available with DocuClip.
Figure Order
number
Construction
1|
PY-P10
Plastic body; electrolyte: KCl yes
3 mol/l, free of silver ions,
fiber junction
0 … 14
Simple
standard
applications
2|
PY-P11
Glass body; electrolyte: KCl
3 mol/l, free of silver ions,
platinum junction, toughened, low-resistance glass
yes
0 … 14
All standard
applications
are TRIScompatible
3|
PY-P12
Plastic body, gel-filled,
fiber junction
yes
0 … 14
Simple
standard
applications
3|
PY-P20
Plastic body, gel-filled,
fiber junction
no
0 … 14
Simple
standard
applications
2|
PY-P21
Glass body; electrolyte: KCl 3 no
mol/l, free of silver ions, platinum junction, toughened,
low-resistance glass
0 … 14
All standard
applications
are TRIScompatible
4|
PY-P22
Microelectrode (length
no
110 mm, diameter 5 mm),
electrolyte: KCl 3 mol/l, free
of silver ions, platinum junction, low-resistance glass
0 … 14
Low sample
quantity
5|
PY-P23
Flat-membrane electrode,
no
glass body, gel-filled, annular
gap junction, low-resistance
glass
2 … 13
Surface
measurements,
low sample
quantity
6|
PY-P24
High-performance electrode, no
plastic body; electrolyte: KCl
3 mol/l, free of silver ions,
adjustable sleeve junction for
control of the flow rate of
the KCl solution, low-resistance glass membrane
0 … 14
Samples with
a low ionic
concentration,
emulsions,
suspensions
for extreme
pH values
3|
4|
5|
6|
7|
8|
9|
10 |
11 |
12 |
Built-in
temperature sensor
Applica- Application
tion range
pH value
ORP combination (redox) electrodes
This type of electrode has an Ag | AgCl reference. It is supplied with a permanently attached
cable and a BNC connector.
Figure Order num- Construction
ber
7|
PY-R01
Glass body, porous ceramic
junction; probe: Platinum
disc (4 mm diameter), electrolyte: KCl 3 mol/l, free of
silver ions
Built-in
temperature sensor
Application range
pH value
no
0 … 14
77
Conductivity cells and multisensor cell (pH, conductivity, temperature)
The conductivity cells are supplied with a permanently attached cable and an 8-pin DIN
connector.
Figure Order
number
Recommended
measuring range
8|
PY-R01
0.5 μS/cm … 2,000 μS/cm
Application range
pH value
4-band conductivity cell (platinum) yes
8|
PY-C02
0.01 mS/cm … 5 mS/cm
4-band conductivity cell (platinum) yes
8|
PY-C03
1 mS/cm … 200 mS/cm
4-band conductivity cell (platinum) yes
PY-C12
1 μS/cm … 300,000 μS/cm 4-band conductivity cell (graphite) yes
PY-PC1
0.01 mS/cm … 5 mS/cm
pH value 0 … 14
3|
Construction
Combination electrode,
12 mm diameter;
120 mm length; 2-band cell
(platinum); pH electrode
with gel-filled electrode;
temperature sensor
yes
Ion-selective pH combination electrodes
All ion-selective electrodes are combination electrodes. They are supplied with a permanently
attached cable and a BNC connector.
Figure Order
number
9|
PY-I01
Ion
Measuring range in ppm
Fluoride (F–)
0.05 … 500
pH application range
5 … 5.5
10 |
Ammonia (NH3)
0.02 … 17,000
> 11
0.02 … to saturated solution
9 … 12
11 |
PY-I02
PY-I03
+
Sodium (Na )
–
9|
PY-I04
Chloride (Cl )
2 … 35,500
2 … 12
9|
PY-I05
Nitrate (NO3–)
0.4 … 62,000
2.5 … 11
9|
PY-I06
Potassium (K+)
0.04 … 39,000
2 … 12
9|
9|
PY-I07
PY-I08
2+
Calcium (Ca )
Silver/sulfide
(Ag+/S2–)
0.2 … 40,000
2.5 … 11
2–
0.003 … 12,000 S |
0.01 … 108,000 Ag+
>12 S 2– |
2 … 8 Ag+
Temperature compensating probe
NTC 10 kO Stainless-steel sensor with permanently attached cable and a 2.5 mm male jack.
Figure Order
number
12 |
PY-T01
78
Recommended for...
Construction
Temperature measurement and automatic
temperature compensation – 120 mm
length without built-in temperature sensor
Stainless-steel body,
4.7 mm diameter,
Accessories
Order number
Data Printer for Professional Meter and
Docu-pHMeter Docu-pH+Meter
YDP20-PH
Paper rolls, 5 x 40 m rolls
6906937
Ink ribbon
6906918
pH buffers
50 capsules per pack; dissolve contents of each capsule
in 100 ml of distilled water
pH = 4.01 ±0.02 at 25°C
PY-Y01
pH = 7.00 ±0.02 at 25°C
PY-Y02
pH = 9.00 ±0.02 at 25°C
PY-Y03
pH = 10.00 ±0.02 at 25°C
PY-Y04
Color-coded buffer solution in practical pump-bottle, eliminates
the need for a beaker during calibration, traceable to NIST standards
pH = 4.00 ±0.01 at 25°C, 500 ml
PY-Y21
pH = 4.00 ±0.01 at 25°C, 6+90 ml
PY-Y21-6
pH = 7.00 ±0.01 at 25°C, 500 ml
PY-Y22
pH = 7.00 ±0.01 at 25°C, 6+90 ml
PY-Y22-6
pH = 10.00 ±0.01 at 25°C, 500 ml
PY-Y23
Storage solution, for pH combination electrodes, 500 ml
PY-Y05
Cleaning solution, pepsin | hydrochloric acid, 500 ml
PY-Y06
Electrolyte solution, KCl (3 mol/l), free of silver ions, 500 ml
PY-Y07
Conductivity standards, traceable to NIST standards
0.084 mS/cm ±1.0 % at 25°C (KCI 0.0001 mol/l), 500 ml
PY-Y10
0.147 mS/cm ±1.0 % at 25°C (KCI 0.001 mol/l), 500 ml
PY-Y11
1.413 mS/cm ±1.0 % at 25°C (KCI 0.01 mol/l), 500 ml
PY-Y12
12.88 mS/cm ±1.0 % at 25°C (KCI 0.1 mol/l), 500 ml
PY-Y13
Equipment Qualification – IQ|OQ|PQ
Qualification (IQ|OQ) pH meter
8407pH
For each additional parameter
8407Para
79
Process
Weighing & Control
81
Process Weighing & Control: Reliable Weighing Equipment
Based on Experience
Within our Process Weighing & Control
business area, we offer an especially wide
range of products and services for many
industrial branches and applications.
Our solutions for your process
Our strength lies in the process industries,
from the food industry through the
chemical industry to pharma|cosmetics|
life sciences. For regulated industries, we
offer qualified performance, from products
through application safety to service. Even
for fields of application that have areas
with explosion risks, our systems offer the
highest level of safety (inc. international
certifications).
In materials flow from goods acceptance
and warehousing through production
and quality assurance to outgoing goods:
our systems record, control and check the
materials flow and accompany the data
flow. Sartorius systems ensure the optimal
use of materials and the best yields.
In item-oriented manufacturing industries,
we are present with counting scales and
checkweighers.
The typical requirements and conditions in
each industrial sector are met thanks to
the appropriate design of our equipment
(process accuracy, materials selection,
surface characteristics, device protection
class, use in explosion risk areas, portable|
fixed) and the accompanying qualification
(IQ/OQ qualification documentation).
Our solutions therefore support the
requirements of current standards and
regulations, such as ISO, DKD, USP, IFS,
BRC, HACCP, GMP, EHEDG, GAMP, and
ATEX.
82
Our solutions for your process
We see ourselves as specialists and highly
capable partners for optimizing weightbased and lot-based processes. At Sartorius,
we offer more than just products. We
provide technical consulting services and
problem-solving expertise that focus on
your processes and add value.
Process optimization is one of the key
driving forces of innovation at Sartorius, as
well as a driving force for your investment
decision.
The high quality of our products and our
prompt, worldwide service guarantee the
optimal and efficient structuring of overall
operating costs – another cornerstone of
your investment decision.
Technical consulting is our calling
Although production processes may resemble each other, no one installation is ever
the same as the other. This is why we offer
our customers individual consulting to
develop solutions that are precisely customized to their specific application.
We operate across the globe contact us today!
Weigh, Detect, Control –
Reliable Technology for Your Process
Weigh
– Complete scales combine ease of use
with high performance – comprehensive
accessories and options permit perfect
adaptation to the installation location
and application
– Platforms in different materials and
accuracies as the basis of a wide variety
of industrial weighing tasks
– Weighing indicators and terminals permit
individual process solutions, while a wide
variety of interfaces and option cards
permit connection to other systems
– Beltweighers for mass flow rate determination of granulated products and discharge regulation in various different
designs for all installation locations.
– Paint mixing scales, from simple scales
to complex, networked systems, with
outstanding product features such as
the recalculation function.
Detect
– Metal detectors for all types of packaged
and unpackaged products and product
flows
– X-ray inspection systems to detect metal,
bone, glass, stones, ceramics and plastics.
They are also used to recognize shape,
volume and dimensions, fill level monitoring, completeness checking, weight
checking, and the detection of cavities
and rips in products.
Control
– Systems for precise dosing of individual
components, with intelligent tracking of
switch-off points for fast and precise
filling.
– Recipe management systems for direct
and simple management of recipe and
material data: from single-user manual
recipe systems through to fully automatic
process control.
– Process controller with built-in PLC and
built-in material and recipe database;
ideal for dosing and recipe processes.
– Dynamic checkweighers for seamless
weight control of loose or packaged
products.
– Finished packaging control systems as a
compact solution through to networked
solutions for in-process quality assurance
– Weighing cells, installation kits and electronics – components optimally matched
to each other cover the entire spectrum
of hopper weighing applications.
– Process transmitters for tank, container
and hopper scales combine particularly
high accuracy and resolution with
extremely high reliability
– Online moisture measurement procedures
permit the split-second determination of
the moisture content in a running production process, with the use of microwave resonance and NIR technology
– Sartorius FLI SealTester - Inline leak testing of gas-flushed food bags directly in
the process and in a non-destructive way.
83
Service
85
Services Provided
The services provided by Sartorius range
from installation and maintenance through
qualification to engineering. Quality and
reliability are the foundation of our service
philosophy. As a worldwide service organization, our aim is to provide the best possible technical weighing services that match
your requirements perfectly.
Installation and commissioning
Installation and commissioning by our
service professionals makes your equipment 100% operational in the shortest possible time. Your new equipment is therefore
at your disposal immediately. In particular,
the reliability of the measuring results and
the service life of your equipment significantly depend on its initial installation and
configuration according to the specifications.
This is what you can expect from us:
– Flawless setup of your equipment
– Connection of peripheral devices such
as printers
– Adjustment of the equipment settings
to your installation location
– Setup of interfaces
– Setup of applications
– Training of equipment users relevant
to your workplace
Equipment qualification (IQ/OQ) –
professional support for the
pharmaceutical industry
Validating your processes requires qualifying the devices you are using. Qualifying
measuring systems in many fields of the
pharmaceutical industry is therefore
mandatory. Sartorius will support you with
a skilled team of trained specialists. Our
solutions support current guidelines such
as e.g. GLP, GMP or FDA. The documentation can easily be integrated into existing
QM systems.
86
The following services are included in the
qualification:
– Clear documentation of the equipment
qualification in the equipment’s logbook
– Review and documentation of the correctness of the equipment installation
– Documentation of the equipment
configuration
– Metrological equipment checking on site
– Issuing a DKD calibration certificate indicating the uncertainty of measurement
– Determining the minimum sample quality
according to the USP guidelines incl.
printout of protocol
– Workplace-related instruction of the
equipment users including training
certificate
Maintenance service and maintenance
contracts
Regular equipment maintenance keeps
your equipment permanently in peak
condition. In this way, you ensure the
reliability of your measuring results, while
effectively preventing unplanned equipment failures and downtime. Whether
under fixed-interval or short-term service
contracts, our maintenance service gives
you the sense of security you need. And
this even holds true for equipment from
other manufacturers.
Our service offering includes:
– Workplace-related functionality checking
of your equipment
– Measurement technology-related and
metrological equipment checking
– Equipment inspection with checking of
mechanical and electrical components
– Testing of equipment settings
– Function-related cleaning
– Equipment adjustment if necessary
Calibration certificates
It is mandatory in the context of inspection
equipment monitoring according to DIN EN
ISO/IEC 17025 that calibration certificates
be issued regularly for all of your measuring devices. Sartorius has been accredited
by the physical technical federal agency
PTB to issue DKD calibration certificates for
non-automatic electronic scales and check
weights. The DKD calibration certificate is
an internationally recognized certificate
that will provide you and your auditors
with an absolute security when assessing
your measuring results. A calibration
certificate can be issued as part of a new
installation or when performing maintenance or corrective maintenance work on
a device.
Corrective maintenance service
We offer corrective maintenance through
our local service and in our repair center.
Using exclusively original spare parts, subsequent adjustments in accordance with
the manufacturer’s specifications, highly
trained technicians and short cycle times
guarantee highest repair quality and only
short downtimes of your equipment.
This is what you can expect from us:
– Short repair cycle times
– Corrective maintenance using
exclusively original spare parts
– Detailed repair report in case of shop
repair
– Function-related cleaning
Your advantages:
– Recognized certificate according
to European DKD guideline
EURAMET|cg-18|v.01
– Consistent traceability to national
standards and the original kilogram
– Exact data regarding measurement
uncertainty
– Determination of the minimum initial
weight
– Security for your inspection equipment
monitoring
– International validity
Minimum initial weight certificate
according to the USP guidelines
Chapter 41 of the United States Pharmacopeia (USP) specifies the use of balances
and weights. This chapter requires that,
when weighing substances, a measurement
uncertainty of 0.1% relating to the initial
weight must not be exceeded.
Our experienced service technicians determine the minimum initial weight according
to USP using a special software tool and
draw up a minimum initial weight certificate according to USP. A mark is placed on
the balance to indicate the smallest permitted initial weight according to USP.
– Equipment adjustment
– Urgent repair service
(subject to agreement)
– New purchase offer in the event of
inefficient repairs
Online test equipment management
The outsourcing of your test equipment
management is a matter of trust!
With an Internet-based platform for test
equipment management, Sartorius offers
you an integral software solution so you
can minimize your test equipment monitoring expenditure. 24 hours a day, 7 days
a week, and from any PC with Internet
access, you have direct access to all relevant test equipment data and can easily
download all calibration certificates.
Your advantages:
– 24-hour/365-day access to all test equipment data and calibration certificates
– Easy-to-use and clear menu structure
– Your location is irrelevant
– The product lifecycle of the equipment is
seamlessly documented
– No software installation required
87
Sartorius AG
Weender Landstraße 94–108
37075 Göttingen, Germany
Telephone +49.551.308.0
Fax +49.551.308.1676
info.mechatronics@sartorius.com
www.sartorius-mechatronics.com
Specifications subject to change without notice.
Printed in Germany
on paper that has been bleached without any use of chlorine
W/sart-262 · G
Publication No.: W—0119-e09049
Order No.: 98649-000-98