Kenwood Electronics M-313 home audio set

COMPACT Hi-Fi COMPONENT SYSTEM
M-313
INSTRUCTION MANUAL
CAUTION: Proper Ventilation
Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to get out.)
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
1. Front: No obstructions and open spacing.
2. Sides/Top/Back: No obstructions should be placed in the areas indicated by the dimensions in the illustration.
3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a
height of 10 cm or more.
Front view
ENGLISH
© 2010 Kenwood Corporation
Side view
SLEEP
Read Safety instructions and others carefully before
using the System.
Speaker
Main unit
Main unit
Specifications
Declaration of Conformity with regard
to the EMC Directive 2004/108/EC
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD
SYMBOL, WITHIN AN EQUILATERAL TRIANGLE,
IS INTENDED TO ALERT THE USER TO THE
PRESENCE OF UNINSULATED "DANGEROUS
VOLTAGE" WITHIN THE PRODUCT’S
ENCLOSURE THAT MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A RISK OF
ELECTRIC SHOCK TO PERSONS.
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525
Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN,
The Netherlands
❍ Prepare the remote control
After unpacking, check to make sure that you have all
the following items:
• Remote control: RC-F0323E (× 1)
• R03 (UM-4)/AAA (24F)-size batteries (× 2)
• FM antenna (× 1)
If anything is missing, consult your dealer immediately.
Insert the batteries into the remote control by matching the polarity (+ and –) correctly.
To insert the batteries in the remote control
Amplifier section
Output Power:
Speakers/Impedance:
Audio Input:
Digital input:
5 W + 5 W at 4 Ω (10% THD)
4Ω–8Ω
AUDIO IN: Stereo mini (ø 3.5 mm)
250 mV/50 kΩ
USB MEMORY
Weight (approx.):
Tuner
FM tuning range:
87.50 MHz – 108.00 MHz
Disc player
Wow and flutter:
Immeasurable
USB
USB specification:
Compatible device:
Compatible system:
Output power:
Speakers
Speaker type:
Speaker units:
Impedance:
Dimensions (approx.):
Compatible with USB 2.0 Full Speed
Mass storage class
FAT16, FAT32
DC 5 V 500 mA
1-Way Bass-Reflex type
10 cm x 1
4Ω
140 mm × 173 mm × 170 mm
(W × H × D)
1.2 kg each
Supplied accessories
See “Supplied accessories” in “Getting started.”
R03(UM-4)/AAA(24F)
(supplied)
In this manual...
• The remote control buttons are used for explaining the
operations unless mentioned otherwise. However, if the
System has the same or similar button names, they can
also be used for the operations.
• “File” and “track” are used interchangeably.
Connections
Do not connect the AC power cord until all other connections have been made.
NOTE:
• Make sure the antenna conductors do not touch any other terminals, connecting cords
or the power cord. Also, keep the antenna away from metallic parts of the System,
connecting cords, and the AC power cord. Otherwise, it could cause poor reception.
Design and specifications are subject to change without
notice.
To connect the speaker cords
Make sure both speakers are connected correctly and firmly.
FM antenna (supplied): Extend it so that you can obtain the best reception.
CAUTION for outdoor antenna installation
Since antenna installation necessitates skill and experience,
always consult your dealer before installation. The antenna
should be placed at a distance from the power distribution
wires. Otherwise, an electric shock accident may occur if the
antenna falls down.
General
/ 50 Hz
Power requirement:
AC 230 V
Power consumption at operation:
25 W
Power consumption in standby mode:
1 W or less
Dimensions (approx.):
150 mm × 175 mm × 211 mm
(W × H × D)
Weight (approx.):
2.1 kg
THE EXCLAMATION POINT WITHIN AN
EQUILATERAL TRIANGLE IS INTENDED TO
ALERT THE USER TO THE PRESENCE OF
IMPORTANT OPERATING AND MAINTENANCE
(SERVICING) INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE APPLIANCE.
CAUTION
• Store the battery in a place where children cannot reach. If a child
accidentally swallows the battery, consult a doctor immediately.
• To prevent the battery from overheating, cracking, or starting a fire:
– Do not recharge, short, disassemble or heat the battery or dispose of it in
a fire.
– Do not leave the battery with other metallic materials.
– Do not poke the battery with tweezers or similar tools.
• Dispose of battery in the proper manner, according to federal, state, and
local regulations.
• The battery (battery pack or battery installed) shall not be exposed to
excessive heat source such as sunshine, fire or the like.
• Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type.
VOLUME
Speaker
CAUTION
❍ Supplied accessories
STANDBY
LVT2193-002A [E]
0710YOMMDWMTS
Getting started
Right
Left
When connecting the speaker cords, match the polarity of the
speaker terminals: black to (–), red to (+).
CAUTIONS:
• Do not connect more than one speaker to each terminal.
• Do not allow the conductor of the speaker cords to be in touch
with the metallic parts of the System.
FM
COAXIAL
( 75 )
NOTE:
• If the speaker cords are covered with vinyl, remove the vinyl to
expose the tip of the speaker cords by twisting the vinyl.
ANTENNA
PHONES
SPEAKER
(4 8 )
AC IN
Maintenance
Playable disc/file types
Troubleshooting
To get the best performance of the System, keep your
discs and the mechanism clean.
• This System can play back...
– Audio CD and CD-R/CD-RW in Audio CD format
– MP3/WMA files on a CD-R/CD-RW (ISO 9660
format) or USB mass storage class device
(maximum data transfer rate: 2 Mbps)
• This System cannot play “packet write” discs.
• For MP3/WMA playback...
– Some MP3/WMA files may not be played back due
to their recording conditions.
– Files created with the following functions provided
with Windows Media™ Player 9 or after cannot be
played back:
• WMA Professional
• WMA Lossless
• WMA Voice
– This System can play only discs of ISO 9660 Level
1 or Level 2.
– This System can play back MP3/WMA recorded at
the following sampling frequency and bitrate.
Sampling frequency:
44.1 kHz
Bitrate:
32 kbps – 320 kbps (VBR*)
*Audio files encoded in VBR (Variable Bitrate)
may contain data outside the compatible bitrate
of this system. Such audio files containing
incompatible bitrates cannot be played back.
– It is recommended to record each file at a
sampling rate of 44.1 kHz and at a bitrate of
128 kbps.
– This System can recognize a total of 999 tracks and
99 groups.
– This System can show the Tag data.
• For playback of files on a USB mass storage class
device...
– You cannot play back files larger than 2 GB.
– This System may not play back some USB mass
storage class devices and does not support DRM
(Digital Rights Management).
If you are having a problem with your System, check this list for a possible solution before calling for service.
Handling discs
• Remove the disc from its case by holding it at the edge
while pressing the center hole lightly.
• Do not touch the shiny surface of the disc, or bend the
disc.
• Put the disc back in its case after use.
• Be careful not to scratch the surface of the disc when
placing it back in its case.
• Avoid exposure to direct sunlight, temperature
extremes, and moisture.
To clean the disc:
Wipe the disc with a soft cloth in a straight line from
center to edge.
Cleaning the System
• Stains should be wiped off with a soft cloth. If the
System is heavily stained, wipe it with a cloth soaked in
water-diluted neutral detergent and wrung well, then
wipe clean with a dry cloth.
• Since the System may deteriorate in quality, become
damaged or get its paint peeled off, be careful about
the following:
– DO NOT wipe it hard.
– DO NOT wipe it with thinner or benzine.
– DO NOT apply any volatile substances such as
insecticides to it.
– DO NOT allow any rubber or plastic to remain in
contact for a long time.
Cleaning the CD pickup lens
• Keep the CD pickup lens clean, or the sound may be
degraded. Use a blower (available at a camera store,
etc.) to blow dust off the lens.
Red
Black
General
Power does not come on.
Adjustments or settings are suddenly
canceled before you finish.
Unable to operate the System from the
remote control.
No sound is heard.
\ Power plug is not inserted securely. Plug it in securely.
\ There is a time limit. Start the procedure again.
\ The path between the remote control and the remote sensor on the
System is blocked.
\ The batteries are exhausted.
\ Headphones are connected.
\ Set the volume control to proper sound level.
FM radio
Hard to listen to broadcasts because of
noise.
Groups and tracks are not played back as
you expect.
The disc/USB mass storage class device
sound is discontinuous.
Sound from the USB mass storage class
device is interrupted.
Sound and other adjustments
\ Antenna connection is incorrect or loose.
\ The FM antenna is not properly extended and positioned.
\ Electrostatic discharge from your body may cause noise. If this
happens, turn the System off then on again.
Disc/USB
The disc/USB mass storage class device
does not play.
To a wall outlet
\ The disc is placed upside down. Place the disc with the label side
facing up.
\ The disc is recorded using “packet writing (UDF file system).” It cannot
be played.
\ The USB mass storage class device is not connected properly.
\ Playing order is determined when the groups and tracks are recorded.
It depends on the writing application.
\ The disc is scratched or dirty.
\ MP3/WMA files have not been properly recorded onto the USB mass
storage class device.
\ Noise and static electricity may stop the sound. In this case, disconnect
and connect the USB mass storage class device again after turning off
the System.
Initial settings
Setting the clock
You can set the clock only when the System is turned
off (on standby.)
1
(Hold)
To check the current time during playback
REPEAT1 GROUP RANDOM PROG.RDS NEWS INFO
TRACK WMA MP3 CD
USB TAPE REC
REPEAT1 GROUP RANDOM PROG.RDS NEWS INFO
USB TAPE REC
TRACK WMA MP3 CD
kHz
MHz
SLEEP HBS JAZZ POP ROCK CLASSIC ST MONO
kHz
MHz
SLEEP HBS JAZZ POP ROCK CLASSIC ST MONO
The time is displayed for a few seconds.
• If you have already set the clock before, press and
hold CLOCK/SLEEP until the clock is flashing.
2
Adjust the hour and minute.
or
• The clock may gain or lose 1 to 2 minutes per month.
You may need to readjust the clock periodically.
If there is a power failure
The clock loses its settings and “0:00” flashes. You need
to set the clock again.
❍ Timer
❍ Display settings
Sleep Timer
Display information
You can set Sleep Timer only when the System is turned
on.
To display MP3(ID3)/WMA tag information
1
During playback of MP3/WMA...
REPEAT1 GROUP RANDOM PROG.RDS NEWS INFO
TRACK WMA MP3 CD
USB TAPE REC
(Hold)
REPEAT1 GROUP RANDOM PROG.RDS NEWS INFO
TRACK WMA MP3 CD
USB TAPE REC
kHz
MHz
SLEEP HBS JAZZ POP ROCK CLASSIC ST MONO
kHz
MHz
SLEEP HBS JAZZ POP ROCK CLASSIC ST MONO
2
ID3 ON
Specify the time (in minutes).
ID3 OFF
MP3(ID3)/WMA tag information is displayed
automatically as follows:
SLEEP 10
SLEEP 20
SLEEP 30
OFF
SLEEP 90
• To check the remaining time until the System shuts
off, press and hold CLOCK/SLEEP.
• To change the shut-off time, press CLOCK/SLEEP
repeatedly.
Group
File
Title
Album
Artist
Blower
❍ Sound adjustments
Lens
Fade muting
Sound Mode
To drop the volume in a moment
To select the sound mode suitable for your favorite
music
REPEAT1 GROUP RANDOM PROG.RDS NEWS INFO
TRACK WMA MP3 CD
USB TAPE REC
kHz
MHz
SLEEP HBS JAZZ POP ROCK CLASSIC ST MONO
ROCK
• To restore the volume, press again or adjust the
volume.
• Microsoft and Windows Media are either
registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other
countries.
• If the System does not work correctly, disconnect the AC power cord from the wall outlet, wait for a while, then
connect the cord again.
• Kenwood corporation bears no responsibility for any loss of data in the USB mass storage class device while using this
System.
Hyper Bass Sound (HBS)
To reinforce the bass sound
ROCK
JAZZ
POP
CLASSIC
Canceled
(No indication)
HBS
HBS
EN_M313_Final_a.indd 1
Canceled
(No indication)
10.7.30 11:31:49 AM
Presetting stations
Searching for stations
Basic operation
1
You can preset up to 20 FM stations.
While listening to a target station...
REPEAT1 GROUP RANDOM PROG. RDS NEWS INFO
USB TAPE REC
TRACK WMA MP3 CD
1
PROG. RDS NEWS INFO
REPEAT1 GROUP RANDOM
PROG.
USB TAPE REC
TRACK WMA MP3 CD
kHz
MHz
SLEEP HBS JAZZ POP ROCK CLASSIC ST MONO
FM
Turn on and off
the power.
1
FM MONO
2
(Hold either button)
• To select a number, see “How to select a number
using the remote control” in the bottom left of the
page.
• You can also use ¢ or 4.
REPEAT1 GROUP RANDOM
PROG. RDS NEWS INFO
PROG.
TRACK WMA MP3 CD
USB TAPE REC
Improving the reception
SLEEP HBS JAZZ POP ROCK CLASSIC ST MONO
When an FM stereo broadcast is hard to listen...
Select a source.
2
1
REPEAT1 GROUP RANDOM PROG. RDS NEWS INFO
TRACK WMA MP3 CD
USB TAPE REC
kHz
2
kHz
MHz
SLEEP HBS JAZZ POP ROCK CLASSIC ST MONO
3
Tuning in to a preset station
kHz
MHz
MONO
FM
Select a PTY code.
REPEAT1 GROUP RANDOM PROG.RDSNEWSINFO
TRACK WMA MP3 CD
USB TAPE REC
kHz
MHz
SLEEP HBS JAZZ POP ROCK CLASSIC ST MONO
PS (NO PS*)
PTY (NO PTY*)
• To select a number, see “How to select a number using
the remote control” in the bottom left of the page.
• You can also use ¢ or 4.
(Press either button)
RT (NO RT*)
Frequency
(No-radio Data System signal)
* Displayed if related signals are not sent by a station.
PS (Program
Commonly known station names.
Service)
PTY (Program
Types of broadcast programs.
Type)
RT (Radio Text) Text messages the station sends.
• When a Radio Data System signal is not received, the
frequency is displayed.
Switching temporarily to a program of
your choice automatically
FM MONO
A--IN
(AUDIO IN)
• When the monaural mode (MONO) is activated, the
reception is improved. However, the stereo effect is
lost.
Adjust the volume.
While listening to a station...
REPEAT1 GROUP RANDOM PROG. RDS NEWS INFO
USB TAPE REC
TRACK WMA MP3 CD
• When you press 5 or ∞ repeatedly, the
frequency changes step by step.
2
3
You can search for a program from the preset stations by
specifying PTY code.
To display the Radio Data System information
Select a preset number.
REPEAT1 GROUP RANDOM
PROG. RDS NEWS INFO
PROG.
TRACK WMA MP3 CD
USB TAPE REC
The station search stops when a station of
sufficient signal strength is found.
• To manually stop the search, press 5 or ∞.
STANDBY lamp
Radio Data System allows FM stations to send an
additional signal along with their regular program
signals.
• If you want to know more about Radio Data System,
visit <http://www.rds.org.uk>.
PTY search
SLEEP HBS JAZZ POP ROCK CLASSIC ST MONO
Preset number
A--IN
(AUDIO IN)
2
FM radio
kHz
MHz
SLEEP HBS JAZZ POP ROCK CLASSIC ST MONO
Receiving FM stations with Radio Data
System
3
kHz
MHz
SLEEP HBS JAZZ POP ROCK CLASSIC ST MONO
Start searching.
REPEAT1 GROUP RANDOM PROG. RDS NEWS INFO
USB TAPE REC
TRACK WMA MP3 CD
kHz
MHz
SLEEP HBS JAZZ POP ROCK CLASSIC ST MONO
When the System finds the one you have selected, that
station is tuned in.
• To stop searching, press PTY SEARCH.
• To search for another station after an unwanted
station has been found, press PTY SEARCH while the
indications are flashing.
• If no program is found, “NO FOUND” appears.
The Enhanced Other Networks function allows the
System to switch temporarily to a preset FM station
broadcasting a program of your choice (NEWS or INFO).
• This function works while listening to the FM station
providing the required signals.
While listening to the FM station...
REPEAT1 GROUP RANDOM PROG.RDSNEWSINFO
NEWS
TRACK WMA MP3 CD
USB TAPE REC
1
kHz
MHz
SLEEP HBS JAZZ POP ROCK CLASSIC ST MONO
INFO
NEWS
Remote sensor
Canceled
(No indication)
NEWS
News.
Program the purpose of which is to
impart advice in the widest sense.
INFO
“NEWS” or “INFO” starts flashing when a station is
broadcasting a program of your choice.
2
Rear side of the main unit
ANTENNA
PHONES
Be sure to turn down
the volume before
connecting or putting on
the headphones.
Headphones (not supplied)
IN
AUDIO
SPEAKER
(4 8 )
5V
3
Stereo mini plug cord
Playback operation
50
1
REPEAT1 GROUP RANDOM PROG.RDS NEWS INFO
TRACK WMA MP3 CD
USB TAPE REC
Stereo mini plug cord
(not supplied)
kHz
MHz
HBS JAZZ POP ROCK CLASSIC ST MONO
FM
How to select a number
using the remote control
Disc/USB
Label side
Notes on USB mass storage class device connection
• Connect or disconnect a USB mass storage class device
when the System is turned off to prevent malfunction.
• Do not use a USB hub.
• When connecting with a USB cable, use a USB 2.0 cable
whose length is less than 1 m.
• The USB mass storage class device is charged through
terminal when “USB” is selected as the source.
(Some USB mass storage class devices may not be
charged through
terminal even if “USB” is selected
as the source.)
• You cannot connect a computer to
terminal of the
System.
• Electrostatic shock at connecting a USB mass storage
class device may cause abnormal playback of the device.
In this case, disconnect the USB mass storage class device
then reset the System and the USB mass storage class
device.
• While playing back a file onto a USB mass storage class
device, do not disconnect the device. Doing so may cause
malfunction on both the System and the device.
• You cannot send any data to your USB mass storage class
device from this System.
• Always set volume to the minimum level when
connecting or disconnecting the USB mass storage class
device.
Playback operations
2
Program Play
During playback...
While playback is stopped...
To play back/pause a disc or a USB mass storage
class device
1
REPEAT1
CD
REPEAT1
kHz
MHz
SLEEP HBS JAZZ POP ROCK CLASSIC ST MONO
REPEAT1 GROUP RANDOM PROG.RDSNEWSINFO
TRACK WMA MP3 CD
USB TAPE REC
USB
kHz
MHz
SLEEP HBS JAZZ POP ROCK CLASSIC ST MONO
• “CD” lights up when an audio CD is set.
• “USB” lights up when a USB device is connected,
and flashes during playback.
• “MP3” or “WMA” lights up while an MP3/WMA is
played.
To open the CD lid
Press 0 PUSH on the CD lid.
2
Canceled
(No indication) *
REPEAT GROUP
(MP3/WMA only)
REPEAT 1
REPEAT
REPEAT GROUP
or
(Press either button)
(2) Select a track.
or
While playback is stopped...
RANDOM
Canceled
(No indication)
Playback starts in a random order.
Random Play ends when all tracks have been played.
Press and hold
To select a group (MP3/WMA only)
O IN
5
Press 5.
20
Press 10, 2, then 0 (when “-- --” appears).
or
Press 10, 0, 2, then 0 (when “-- -- --” appears).
125
Press 10, 1, 2, then 5.
EN_M313_Final_a.indd 2
5V
500m
A
USB mass storage
class device
To stop playback
Select a track number (up to 32 tracks).
For audio CD:
For MP3/WMA:
(1) Select a group.
Repeats the current track.
Repeats all tracks (or the programmed
tracks during Program Play).
Repeats all tracks in the current group
(MP3/WMA only).
• If you try to program a 33rd track, “PROGFULL“
appears on the display.
• You can also use number buttons to select a
group and track.
To fast-forward a track
Press
While Program Play is stopped...
• To check the programmed tracks, press DISPLAY/
PROGRAM repeatedly.
• To add tracks, press DISPLAY/PROGRAM repeatedly
until “00” appears on the display. Then repeat the steps
1 and 2 above.
• To erase the entire program, press 7.
or
* “GROUP” lights up on the display when playback is
stopped. (MP3/WMA only)
Random Play
To select a track
Press
REPEAT
RANDOM
Operation
PROG.
REPEAT1 GROUP RANDOM PROG.RDSNEWSINFO
TRACK WMA MP3 CD
USB TAPE REC
To fast-reverse a track
Number
Start playback of the external device.
Repeat Play
Press and hold
Examples:
FM MONO
A--IN
(AUDIO IN)
External
device
DO NOT turn off the System with the volume set to an extremely high level; otherwise,
the sudden blast of sound may damage your hearing, speakers, and headphones when you
turn on the System or start playback.
Notes on external device connection
• Always set volume to the minimum level when
connecting or disconnecting the external device.
(either button)
• You cannot select a track with the number buttons
during Random Play.
3
or
• You can repeat the programmed tracks by pressing
REPEAT.
• You cannot select a track with the number buttons
during Program Play.
Press
10.7.30 11:31:56 AM