T W-84.1
USER M ANUAL
Tilting Wall Mount
FOR SÉURA 65″ - 84″ OUTDOOR TELEVISIONS
w w w. s eur a .c o m
Contents
P5080T
Contents
Weight Limit. ................................................................................................................................................................................. 2
Warning Statements. .................................................................................................................................................................... 2
Installation Tools. .......................................................................................................................................................................... 3
Parts List....................................................................................................................................................................................... 3
Mounting Hardware. ..................................................................................................................................................................... 4
Features. ...................................................................................................................................................................................... 5
Installing the Wall Plate. ............................................................................................................................................................... 6
Introduction. ................................................................................................................................................................... 6
Determining the Mounting Surface................................................................................................................................. 6
Wood Stud Installation. .................................................................................................................................................. 6
Concrete Installation. ..................................................................................................................................................... 8
Steel Stud Installation. ................................................................................................................................................... 9
Installing the Mounting Bracket. ..................................................................................................................................................11
Selecting the Mounting Hardware. ................................................................................................................................11
Universal Washer Installation. ...................................................................................................................................... 12
Universal Spacer Installation........................................................................................................................................ 12
Locking Screw Installation............................................................................................................................................ 13
Lock-It™ Security Barrel Installation (Optional).......................................................................................................................... 13
Attaching the Mounting Bracket to the Flat Panel. ..................................................................................................................... 14
Attaching the Flat Panel to the Wall Plate. .................................................................................................................... 14
Mounting Bracket Adjustments. .................................................................................................................................................. 15
Leveling Screw Adjustment. ......................................................................................................................................... 15
Locking Screw Adjustment. .......................................................................................................................................... 15
Tilt Adjustment. ............................................................................................................................................................. 15
Utilizing the Security Barrel. ......................................................................................................................................... 16
Technical Specifications. ............................................................................................................................................................ 16
Warranty. .................................................................................................................................................................................... 17
Disclaimer ................................................................................................................................................................................... 17
Weight Limit
Maximum Flat Panel Weight:
300 lbs.
THE WALL STRUCTURE MUST BE CAPABLE OF
SUPPORTING AT LEAST FIVE TIMES THE WEIGHT OF
THE FLAT PANEL. IF NOT, THE WALL STRUCTURE MUST
BE REINFORCED.
Warning Statements
PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS MUST BE READ AND
COMPLETELY UNDERSTOOD. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION
FOR FUTURE REFERENCE.
PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN MUST BE FOLLOWED, AS OUTLINED
IN THESE INSTALLATION INSTRUCTIONS. FAILURE TO DO SO COULD RESULT IN PROPERTY DAMAGE, SERIOUS
PERSONAL INJURY, OR EVEN DEATH.
SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS PRODUCT. USE
PROPER SAFETY EQUIPMENT AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY.
PREMIER
MOUNTS
DOES NOT
WARRANT
AGAINST
DAMAGE
CAUSED
THE
USE PRODUCT
OF ANY PREMIER
MOUNTS
SÉURA
DOES
NOT WARRANT
AGAINST
DAMAGE
CAUSED
BY THE
USE OFBY
ANY
SÉURA
FOR PURPOSES
PRODUCT
FOR
PURPOSES
OTHER
THAN
THOSE FOR
WHICH IT
WAS DESIGNED
OR DAMAGE
CAUSED BYOR
OTHER
THAN
THOSE
FOR WHICH
IT WAS
DESIGNED
OR DAMAGE
CAUSED
BY UNAUTHORIZED
ATTACHMENTS
UNAUTHORIZEDAND
ATTACHMENTS
OR MODIFICATIONS,
AND IS NOT
RESPONSIBLE
ANYACTIONS
DAMAGES,
CLAIMS, OF
MODIFICATIONS,
IS NOT RESPONSIBLE
FOR ANY DAMAGES,
CLAIMS,
DEMANDS,FOR
SUITS,
OR CAUSES
DEMANDS,
SUITS, ACTIONS
OR CAUSES
OF ACTION
OF
WHATEVER
RESULTING
FROM,TO
ARISING
OUTUSE,
OF OR
ACTION
OF WHATEVER
KIND RESULTING
FROM,
ARISING
OUT
OF OR IN KIND
ANY MATTER
RELATING
ANY SUCH
IN ANY MANNER
TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS.
ATTACHMENTS
ORRELATING
MODIFICATIONS.
At least two qualified people should perform the assembly procedure. Personal injury and/or property damage can result
from dropping or mishandling the flat panel.
If mounting to wall studs or ceiling studs, make sure that the mounting screws are anchored into the center of the wall studs
or ceiling studs. Use of an edge-to-edge stud finder is recommended.
It is recommended that a maximum of ⅝″ plaster board be used when mounting to wooden studs.
Be aware of the mounting environment. If drilling and/or cutting into the mounting surface, always make sure that there
are no electrical wires in wall. Cutting or drilling into an electrical line may cause serious personal injury.
Make sure there are no water or natural gas lines inside the wall where the mount is to be located. Cutting or drilling into a
water or gas line may cause severe property damage or personal injury.
This product is intended for indoor use only. Use of this product outdoors could lead to product failure and/or serious
personal injury.
2
Page 2
Do not install near sources of high heat. Do not install on a structure that is prone to vibration, movement or chance of
impact.
Contact Premier Mounts with any questions:
(800) 368-9700
techsupport@mounts.com
Visit the Premier Mounts website at http://www.premiermounts.com
Installation Instructions
P5080T
Installation Tools
Installation
The
following tools may be required depending upon your particular installation. They are not included.
P5080T
Installation Tools
The following tools may be required depending upon your particular installation. They are not included.
7/16˝
Drill Bit for
Steel Stud*
¼˝ Drill Bit for
Wood Stud
Electronic Stud Finder
¼˝ Drill Bit for
Wood Stud
Electronic Stud Finder
/16˝ Concrete Drill Bit**
Hand Held Drill
5
7/16˝
Drill Bit for
Steel Stud*
/16˝ Concrete Drill Bit**
Hand Held Drill
5
2
1
Level
Pencil
Tape Measure
Hammer**
2
1
Level
Pencil
Tape Measure
Socket Wrench
Protective Eyewear
* Optional tools for steel stud installations.
** Optional tools for concrete installations.
Protective Eyewear
* Optional
tools for steel stud installations.
Parts
List
Phillips Tip Screwdriver
M10 Socket*
½˝ Socket
Socket Wrench
Hammer**
½˝ Socket
Phillips Tip Screwdriver
M10 Socket*
** Optional tools for concrete installations.
Make sure your Premier Mounts product has the following hardware and components before beginning installation. If
there are parts missing and/or damaged, stop the installation and call Premier Mounts at (800) 368-9700.
Parts List
Make sure your Premier Mounts product has the following hardware and components before beginning installation. If
Ensure your package includes the following hardware and components before beginning installation. If any parts are missing and/or damaged, stop the
there are parts missing and/or damaged, stop the installation and call Premier Mounts at (800) 368-9700.
installation and call Séura at (800) 957-3872.
P5080T Universal Low Profile Tilt Mount Assembly Components
P5080T Universal Low Profile Tilt Mount Assembly Components
Wall Plate
(Qty 1)
Universal Tilt Brackets
(Qty 2)
5
/16˝
Flat Washers
(Qty 6)
5
/16˝
Universal Spacers
(Qty 24)
Universal Spacers
(Qty 24)
Flat Washers
(Qty 6)
M6 x 120mm Screws
(Qty 2)
Wall Plate
(Qty 1)
Universal Tilt Brackets
(Qty 2)
Security Barrel
(Qty 1)
Lock-It™
Security Tube
(Qty 1)
M6 x 120mm Screws
(Qty 2)
Thread Depth Indicator
(Qty 1)
Pro Mounting Hardware
Security Barrel
(Qty 1)
Lock-It™
Security Tube
(Qty 1)
Universal Washers
(Qty 6)
Thread Depth Indicator
(Qty 1)
Universal Washers
(Qty 6)
Pro Mounting Hardware
M6 Steel Stud Anchors
(Qty 6)
M6 Steel Stud Anchors
(Qty 6)
Installation Instructions
5
/16˝
Concrete Wedge Anchors
(Qty 6)
5
/16˝
Concrete Wedge Anchors
(Qty 6)
Visit the Premier Mounts website at http://www.premiermounts.com
5
/16˝
x 3˝ Lag Bolts
(Qty 6)
5
/16˝
x 3˝ Lag Bolts
(Qty 6)
Page 3
3
Parts List (cont’d)
Parts List (cont’d)
P5080T
Mounting Hardware
M4 x 16mm Screw
(Qty 6)
M8 x 16mm Screw
(Qty 6)
M4 x 25mm Screw
(Qty 6)
M8 x 25mm Screw
(Qty 6)
M4 x 30mm Screw
(Qty 6)
M8 x 30mm Screw
(Qty 6)
M5 x 16mm Screw
(Qty 6)
M8 x 45mm Screw
(Qty 6)
M5 x 25mm Screw
(Qty 6)
M5 x 30mm Screw
(Qty 6)
M8 x 70mm Screw
(Qty 4)
M10 x 30mm Screw
(Qty 6)
M6 x 16mm Screw
(Qty 6)
M6 x 25mm Screw
(Qty 6)
M6 x 30mm Screw
(Qty 6)
M6 x 45mm Screw
(Qty 6)
4
Page 4
Visit the Premier Mounts website at http://www.premiermounts.com
Installation Instructions
Features
P5080T
Features
Leveling Screws
Allows for leveling
adjustments of the flat panel
after mounting.
Cable/Electrical Cut Out
A large cutout on the wall
plate allows for easy cable
access and power
distribution installations.
Directional Mounting Arrow
The arrow lets you know which
edge is up.
Low Profile Design
Holds the flat panel less
than 2” from the wall.
Mounting Slots
Allow for a variety of stud
configurations and lateral
shift adjustments when
mounting your flat panel.
Locking Safety Screws
Prevents the flat panel from
being removed or dislodged
from the wall plate.
Universal Spacers
Premier
uniquely
UniquelyMount’s
designed
spacers
designed
fit multiple
fit multiplespacers
screw sizes.
screw sizes.
Installation Instructions
Visit the Premier Mounts website at http://www.premiermounts.com
Page 5
5
P5080T
P5080T
P5080T
P5080T
Installing
Installing the
the Wall
Wall Plate
Plate
Installing the Wall Plate
Introduction
Installing
the Wall Plate
Introduction
Introduction
Directional
Mounting
Arrow
Introduction
Directional
Mounting
Arrow
The Directional
Mounting
Arrow stamped into the
Installing the Wall Plate
Directional
Mounting
Arrow
The
Directional
Mounting
Arrow
stamped
into the
top
of
the
P5080T
wall
mount
indicates
which
Directional
Mounting
Arrow
The
Directional
Mounting
Arrow
stamped
into the
top
of
the
P5080T
wall
mount
indicates
which
edge
is
the
top.
The
Directional
Arrow
stamped
into the
top of
wall mount
indicates
which
edge
isthe
theP5080T
top. Mounting
TW-84.1
top ofisthe
P5080T
wall mount indicates which
edge
the
top.
Mounting
edge is theSafety
top.
Mounting
Safety
Two
people
are
Mounting
Safety
Two
people
are recommended
recommended to
to install
install this
this
Mounting
Safety
mount.
Two
people
are
recommended
to
install this
mount.
Two people are recommended to install this
mount.
mount.
Determining
Determining the
the Mounting
Mounting Surface
Surface
Determining the Mounting Surface
If
be
your
P5080T
Determining
Mounting
If you
you will
willthe
be installing
installing
yourSurface
P5080T mount
mount to
to
wood
the
“Wood
TW-84.1 Stud
If
you studs,
will be proceed
installingto
mount to
wood
studs,
proceed
toyour
the P5080T
“Wood
Stud
Installation”
section.
If
you
will
be
installing
your
P5080T
mount to
wood
studs,
proceed
to
the
“Wood
Stud
Installation” section.
wood studs, proceed
to the “Wood Stud
Installation”
section.
If
be
your
Installation”
If you
you will
will
be installing
installingsection.
your P5080T
P5080T mount
mount to
to a
a concrete
concrete
wall,
proceed
to
the
“Concrete
Installation”
If
you
will
be
installing
your
P5080T
mount
to
a
concrete
TW-84.1
wall, proceed to the “Concrete Installation” section.
section.
If youproceed
will be installing
your P5080T
mount to a
concrete
wall,
to the “Concrete
Installation”
section.
If
you
will
your
mount
steel
wall,
to the “Concrete
Installation”
section.
If
youproceed
will be
be installing
installing
your P5080T
P5080T
mount to
to a
a
steel
frame,
proceed
to
Stud
If
you will
be installing
your P5080T
mount to a steel
TW-84.1
frame,
proceed
to the
the “Steel
“Steel
Stud Installation”
Installation”
section.
If you will
be installing
your P5080T
mount to a steel
frame,
proceed
to the “Steel
Stud Installation”
section.
frame, proceed to the “Steel Stud Installation”
section.
section.
Wood
Wood Stud
Stud Installation
Installation
Wood
Step
1 Stud Installation
Step
1
Wood Stud Installation
Step 1
You must
secure
the
plate
to
three
(3)
wall
must
secure
the wall
wall
plate
to
three
(3)
wall
Step 1You
studs
with
a
minimum
of
six
(6)
lag
bolts
(2
lag
You
must
secure
the
wall
plate
to
three
(3)
wall
studs
with
a
minimum
of
six
(6)
lag
bolts
(2
lag
bolts
for
each
stud
found).
You
must
secure
the
wall
plate
three
studs
with
a minimum
of six
(6)to
lag
bolts(3)
(2wall
lag
bolts
for
each
stud
found).
studsfor
with
a minimum
of six (6) lag bolts (2 lag
bolts
each
stud
found).
Use
a
stud
finder
to
determine
the
exact
center
­
bolts
for each
stud
found). the exact center of
a stud
finder
to determine
of
­­­ Use
wall
studs
in
the
vicinity
of
plate.
Use studs
a studinfinder
to determine
the exact
­­ wall
the vicinity
of the
the wall
wall
plate. center of
studinfinder
to determine
the
exact
center ofthe
wall studs
the
vicinity
of the wall
plate.
a
to
the
center
of
­
®
Use studs
a pencil
pencil
to mark
mark
theofexact
exact
center
of each
each of
of the
®­­ Use
wall
in
the
vicinity
the
wall
plate.
studs.
Use studs.
a pencil to mark the exact center of each of the
®­ wall
Use studs.
a pencil to mark the exact center of each of the
®­ wall
wall studs.
Wo
Wood
Wood SSttud
o u
Wo d Stud
od d
Stu
d
Co
Concr
n
Co creette
n e
Co crete
ncr
ete
Ste
Steel St
Steel Stuudd
e
Ste l Stud
el S
tud
X
X
X
X
X
X
X
X
X
X
X
X
Step
Step 2
2
Step 2Two people are recommended for this step: one
people
are the
recommended
foranother
this step:
one
Step 2Two
person
to
level
wall
plate
and
person
Two
people
are the
recommended
foranother
this step:
one
person
to
level
wall
plate
and
person
to
mark
the
wall
stud
location.
Two
people
are the
recommended
foranother
this step:
one
person
to
level
wall
plate and
person
to
mark
the
wall
stud
location.
person
to
level
the
wall
plate and another person
to
mark
the
wall
stud
location.
Place
the
wall
plate
against
the
wall
in
the
desired
­
to mark
the wall
location.
the
wall
platestud
against
the wall in the desired
­­­ Place
location.
Place the
wall plate against the wall in the desired
viewing
location.
­­ viewing
Place the
wall
plate
against
the
wall
in the
desired
viewing
location.
the
wall
plate
to
the
mount
slots
­
®
Adjust
the
wall the
plate
to align
align
thewall
mount
slots in
in the
the
®­­ Adjust
viewing
location.
wall
plate
with
center
of
the
studs.
Adjust
thewith
wall the
plate
to align
thewall
mount
slots in the
®­ wall
plate
center
of the
studs.
Adjust
thewith
wallplate.
plate
to align
thewall
mount
slots in the
wall
plate
the
center
of the
studs.
the
®
¯
Level
the wall
wall
¯­­ Level
wall
plate
with plate.
the center of the wall studs.
Level
the
wall
plate.
a
to mark
the
mounting
¯
°
­­ Use
Use
a pencil
pencil
mark
the upper-right
upper-right
mounting
°
Level
walltoplate.
along
center
of
¯
Use a the
pencil
mark
the upper-right
mounting
°­­ location
location
alongtothe
the
center
of the
the wall
wall stud.
stud.
Use a pencil
mark
the upper-right
mounting
alongtothe
center
of the wall stud.
°­ location
location along the center of the wall stud.
6
Page
Page 6
6
Page 6
Page 6
Visit the Premier Mounts website at http://www.premiermounts.com
Visit the Premier Mounts website at http://www.premiermounts.com
Visit the Premier Mounts website at http://www.premiermounts.com
Visit the Premier Mounts website at http://www.premiermounts.com
Installation
Installation Instructions
Instructions
Installation Instructions
Installation Instructions
P5080T
P5080T
P5080T
Installing
Installing the
the Wall
Wall Plate
Plate (cont’d)
(cont’d)
P5080T
Installing
the
Wall
Plate (cont’d)
Step
3
Installing
the Wall Plate (cont’d)
Step
3
Step
3“pilot hole” in the center of the upper-right mark
Drill
a
Step
Drill a3a“pilot
hole”
thepower
centerdrill.
of the upper-right mark
using
¼″ drill
bitin
and
Drill a a“pilot
hole”
thepower
centerdrill.
of the upper-right mark
using
¼″ drill
bitinand
Drill
hole”
inand
thepower
centerdrill.
of the upper-right mark
usingaOnly
a“pilot
¼″ use
drill
bit¼″
a
drill
bit
when
the pilot holes.
using Only
a ¼″ use
drill a
bit¼″
and
power
drill.drilling
drill
bit when
drilling the pilot holes.
Only use a ¼″ drill bit when drilling the pilot holes.
Only use a ¼″ drill bit when drilling the pilot holes.
Installing the Wall Plate (cont’d)
Step 4
Step 4
StepPlace
4 the wall plate against the wall and align it with
­
Step
4
thehole.
wall plate against the wall and align it with
­­­ Place
the
pilot
Place
thehole.
wall plate against the wall and align it with
the pilot
­­ Place
5
the
wall
against
theand
wallone
and(1)
align
­
­ Insert
the pilot
hole.
one
(1) 55plate
/16″ x 3″
lag bolt
/16″ it with
®
Insert
one
(1)
/16″ x 3″ lag bolt and one (1) 55/16″
®­ the
pilot
hole.
5 upper right mounting hole and
washer
into
the
Insert one
/16upper
″ x 3″ lag
bolt
and onehole
(1) and
/16″
into(1)
the
right
mounting
®­ washer
tighten
using
a5/16socket
wrench
and one
½″ socket.
one
″ x 3″ lag
bolt
and
(1) 5and
/16″
®­ Insert
washer
into(1)the
upper
right
mounting
tighten
using
a socket
wrench
and ½″hole
socket.
washer
into the
upper right
mounting
and
tighten using
a socket
wrench
and ½″hole
socket.
tighten
using
a
socket
wrench
and
½″
socket.
Do not overtighten the lag bolt.
Do not overtighten the lag bolt.
Do not overtighten the lag bolt.
Do not overtighten the lag bolt.
Step 5
Step 5
StepLevel
5
wall plate.
­
Step
5 the
the wall plate.
­­­ Level
Levela the
walltoplate.
Use
pencil
mark the remaining five (5) mounting
­
®
Use
athe
pencil
mark
the remaining
fivestud.
(5) mounting
®­­ Level
walltoplate.
­
locations
along
the center
of each wall
Use a pencil
to mark
the remaining
fivestud.
(5) mounting
locations
along
the center
of each wall
®­ Use
a pencil
to mark
the remaining
five stud.
(5) mounting
®­ locations
along
the center
of each wall
locations along the center of each wall stud.
Step 6
Step 6
Step 6
people are recommended for this step: one
Step 6Two
Two
people
are the
recommended
foranother
this step:
one
person
to level
wall plate and
person
Two
people
are the
recommended
foranother
this step:
one
person
to level
wall plate and
person
to
drill
the
pilot
holes.
Two
people
are holes.
recommended
for another
this step:
one
person
to level
the
wall plate and
person
to drill
the
pilot
person
to level
the
wall plate and another person
to
drill the
pilot
holes.
Drill ato
“pilot
in the
center of each of the marks with
drill hole”
the pilot
holes.
Drill
a
“pilot
hole”
in
the
center
each of the marks with
a
power
drillhole”
and a ¼″
bit. of
Drill
a “pilot
thedrill
center
a
power
drill and ain¼″
drill
bit. of each of the marks with
Drill
a “pilot
hole”
in¼″
thedrill
center
the marks with
a power
drill
and
bit. of each of
Only
use
¼″aadrill
bit when
the pilot holes.
a power
drill
and
¼″ drill
bit. drilling
Only
use
¼″ drill
bit when
drilling the pilot holes.
Only use ¼″ drill bit when drilling the pilot holes.
Only use ¼″ drill bit when drilling the pilot holes.
Installation Instructions
Installation Instructions
Installation Instructions
Installation Instructions
Visit the Premier Mounts website at http://www.premiermounts.com
Visit the Premier Mounts website at http://www.premiermounts.com
Visit the Premier Mounts website at http://www.premiermounts.com
Visit the Premier Mounts website at http://www.premiermounts.com
Page 77
Page 7
Page 7
Page 7
Installing the Wall Plate (cont’d)
P5080T
Installing the Wall Plate (cont’d)
Step 7
­­ Insert one (1)
®­
5
/16″ x 3″ lag bolt and one (1) 5/16″ washer
into each pilot hole.
Tighten all lag bolts using a socket wrench and ½″
socket.
Do not overtighten the lag bolts when attaching the
mount to the wall. Improper installation may result in
personal injury or property damage.
Proceed to the “Installing the Mounting Bracket”
section.
Concrete Installation
The supplied 5/16″ concrete wedge anchors must be
used for concrete installation.
You will need a 5/16″ concrete drill bit, which is
available at your closest hardware store.
Concrete Wedge Anchors
Example of 5/16″ Concrete Drill Bit (Not Included)
Step 1
Two people are recommended for this step: one
person to level the wall plate and another person
to mark the mounting locations.
>1
2”
>1
2”
­­ Place the wall plate against the wall in the desired
®­
¯­
°­
viewing location.
Level the wall plate.
Use a pencil and mark 3 upper and 3 lower
mounting locations where you will be drilling holes
for the concrete wedge anchors. Each horizontal
location cannot be closer than 12″ apart.
Set the wall plate to one side in a safe location.
Step 2
Use a power drill and 5/16″ concrete drill bit to drill a hole
at each of the marks.
8
Page 8
Visit the Premier Mounts website at http://www.premiermounts.com
Installation Instructions
P5080T
P5080T
P5080T
Installing
Installing the
the Wall
Wall Plate
Plate (cont’d)
(cont’d)
P5080T
Installing the Wall Plate (cont’d)
Step
3
Installing
the Wall Plate (cont’d)
Step
3
Step
3
­
­­ Insert
Step
3 a
Insert
a concrete
concrete wedge
wedge anchor
anchor into
into each
each hole.
hole.
­
a concrete wedge anchor into each hole.
­­ Insert
If
lightly
tap
concrete
wedge
anchor
a concrete
wedge
anchor
into each
hole.
­­ Insert
If necessary,
necessary,
lightly
tap each
each
concrete
wedge
anchor
into
place
a
If
necessary,
tap each concrete wedge anchor
into
place with
withlightly
a hammer.
hammer.
If
necessary,
lightly
tap each concrete
wedge
anchor
into
placethe
with
a hammer.
Remove
nuts
and
®
Remove
nuts
and washers
washers from
from all
all six
six (6)
(6)
placethe
with
a anchors.
hammer.
®­­ into
concrete
wedge
nutsanchors.
and washers from all six (6)
®­ Remove
concrete the
wedge
Remove the
nutsanchors.
and washers from all six (6)
®­ concrete
wedge
concrete wedge anchors.
Installing the Wall Plate (cont’d)
Step
Step 4
4
Step
4 the wall plate against the wall over the
Place
­
­
Step
4 the wall plate against the wall over the
­
­ Place
threaded
of
concrete
wedge
anchors.
the shafts
wall plate
against
the wall
over
the
­­ Place
threaded
shafts
of the
the
concrete
wedge
anchors.
Place
the
wall
plate
against
the
wall
over
the
­
­
threaded
shafts
of thewhich
concrete
wedge
anchors.
Replace
the
washers
you
removed
from
®
­
Replace the
washers
which
youwedge
removed
from
5 anchors.
shafts
of the
concrete
®­ threaded
the
concrete
wedge
anchors
with
the
/
16
″
washers
the washers
which you
from
®­ Replace
the concrete
wedge anchors
withremoved
the 55/16″ washers
shown
in
the
parts
on
3.
Replace
which
you
from
®­ the
concrete
wedge
anchors
with
the 5/16″ washers
shown
inthe
thewashers
parts list
list
on Page
Page
3.removed
5anchors with the /16″ washers
the
concrete
wedge
shown
in
the
parts
list
on
Page
3.
Attach
the
nuts
and
/
16
″
washers
to
each
of
5
¯
Attach the
nuts
andlist
/16on
″ washers
of the
the
shown
in wedge
the
parts
Pagetighten
3.to each
¯­­ Attach
5
concrete
anchors
and
using
socket
the
nuts
and
/
16
″
washers
to
each
of
¯­ Attach
concrete wedge anchors
and tighten using a
athe
socket
5
wrench
and
an
socket.
nuts
and
/16″ washers
to each
of athe
¯­ concrete
wedge
anchors
and tighten
using
socket
wrenchthe
and
an M10
M10
socket.
concrete
wedge
anchors
and tighten using
a socket
wrench
and
an M10
socket.
Do
overtighten
the
Do not
notand
overtighten
the wedge
wedge anchor
anchor nuts.
nuts.
wrench
an M10 socket.
Do not
overtighten
the the
wedge
anchor Bracket”
nuts.
Proceed
to
“Installing
Mounting
Do not
overtighten
the the
wedge
anchor Bracket”
nuts.
Proceed
to the
the
“Installing
Mounting
section.
Proceed
section. to the “Installing the Mounting Bracket”
Proceed
section. to the “Installing the Mounting Bracket”
section.
Steel
Steel Stud
Stud Installation
Installation
SteelThe
Stud
Installation
supplied
M6
SteelThe
Stud
Installation
supplied
M6 steel
steel stud
stud anchors
anchors must
must be
be used
used
to
your
Premier
Mounts’
mount
to
The
supplied
steel
stud
anchors
must
be used
Séura
Outdoor
TV mount
to install
install
yourM6
Premier
Mounts’
to steel
steel
studs.
Do
not
use
lag
bolts
or
screws.
The
supplied
steel
must
be used
to
install
your
Premier
Mounts’
mount
to steel
studs.
Do
notM6
use
lag stud
boltsanchors
or wood
wood
screws.
to installDo
your
mountscrews.
to steel
studs.
notPremier
use lag Mounts’
bolts or wood
studs. Do not use lag bolts or wood screws.
Steel Stud Anchor Screw
Steel Stud Anchor Screw
Steel Stud Anchor Screw
Steel Stud Anchor Screw
Step
Step 1
1
Step
1
Identify
­
­
Step
1
Identify the
the general
general location
location on
on the
the wall
wall where
where you
you
­­ Identify
will
be
mounting
your
flat
panel.
the general
location
on the wall where you
­­ Identify
will be mounting
your
flat panel.
the finder
general
location
on the
the exact
wall where you
­
­ will
be
mounting
your
flat panel.
Use
a
to
®
Usebe
a stud
stud
finderyour
to determine
determine
exact center
center
mounting
flatvicinity
panel.the
®­­ will
of
each
steel
stud
in
the
of
the
mounting
a stud
finder
exact
center
®­ Use
of each
steel
studto
indetermine
the vicinitythe
of the
mounting
location.
Use
a
stud
finder
to
determine
the
exact
center
®­ of
each steel stud in the vicinity of the mounting
location.
of
eachpencil
steel studmark
in the vicinity
of the mounting
location.
Use
¯
­
Use a
a pencil and
and mark the
the exact
exact center
center of
of each
each
¯­ location.
steel
stud.
Use
a
pencil
and
mark
the
exact
center
of
each
¯­ Use
steel stud.
pencil and mark the exact center of each
¯­ steelastud.
steel stud.
Installation
Installation Instructions
Instructions
Installation Instructions
Steel Stud Anchor Sleeve
Steel Stud Anchor Sleeve
Steel Stud Anchor Sleeve
Steel Stud Anchor Sleeve
X
X
X
X
X
X
X
X
Visit the Premier Mounts website at http://www.premiermounts.com
Visit the Premier Mounts website at http://www.premiermounts.com
Visit the Premier Mounts website at http://www.premiermounts.com
X
X
X
X
9
Page
Page 9
9
Page 9
Installing the Wall Plate (cont’d)
Installing the Wall Plate (cont’d)
Step
2
Installing
the Wall Plate (cont’d)
Installing the Wall Plate (cont’d)
P5080T
P5080T
P5080T
Step 2
­
­ Place
Step
2 the wall plate against the wall in the desired
Place the
location.
wall plate against the wall in the desired
­­ viewing
Place
the
the
wall
in the desired
viewing
location.
­
­
thewall
wallplate
plateagainst
to match
the
locations
of the
®­ Adjust
viewing
location.
Adjuststuds.
the wall plate to match the locations of the
®­ steel
thewall
wallplate.
plate to match the locations of the
steel studs.
®
Level
the
¯­­ Adjust
steel
studs.
walland
plate.
¯
­­ Level
Use a the
pencil
mark 3 upper and 3 lower
°
Level
the
walland
plate.
¯
­
Use
locations
a
pencil
where
you
mark
will3be
upper
drilling
andholes
3 lower
for the steel
°­ Use a pencil and
mark
upper
andholes
3 lower
locations
anchors.
where you
will3be
drilling
for the steel
°­ stud
locations
where
you
will be
drilling
holes
for the steel
stud
anchors.
Set
the
wall
plate
to
one
side
in
a
safe
location.
±­ stud anchors.
the wall plate to one side in a safe location.
±­ Set
±­ Set the wall plate to one side in a safe location.
Step 3
Step 3
7
­
­ Use
Step
3 a power drill and 7/16″ drill bit to drill a hole at
Use
each
a
of
power
the
marks.
drill
and
/16″ drill bit to drill a hole at
­­
7
Use
a
power
drill
and
/16″ drill
to drill
a hole at
each
of
the
marks.
­
­
a steel stud anchor
intobit
each
hole.
®­ Insert
each of
the
marks.
Insert
a
steel
stud
anchor
into
each
hole.
®­ Insert a steel stud anchor into each hole.
®­ If necessary, lightly tap each steel stud anchor into
If necessary,
place
with a hammer.
lightly tap each steel stud anchor into
If necessary,
lightly tap each steel stud anchor into
place
with a hammer.
place with a hammer.
Step 4
Step 4
Use a4Phillips screwdriver to tighten each steel
Step
Use
Phillips
screwdriver
tighten
steel
stud aanchor
screw
until thetolegs
haveeach
completely
Use
aanchor
Phillips
screwdriver
tolegs
tighten
each
steel
stud
screw
until
completely
compressed
against
thethe
back
of have
the steel
stud.
stud
anchor screw
until
legs
completely
compressed
against
thethe
back
of have
the steel
stud.
The steel
stud anchor
screw
will
feelstud.
tight when
compressed
against
the back
of the
steel
The
you first
steelbegin
stud anchor
to turn itscrew
until the
will legs
feel tight
beginwhen
to
The
steelbegin
stud
will legs
feel
tight
when
you first
compress.
Theanchor
tosteel
turnstud
itscrew
until
anchor
the
screw
begin
will
to
then
you first
begin
tosteel
turnstud
itturns.
until
the
begin
compress.
turn
easier
The
for several
anchor
Thelegs
steel
screw
stud
willto
anchor
then
compress.
The
steel
stud
anchor
screw
will
then
turn
screw
easier
will again
for several
feel tight
turns.
when
Thethe
steel
legsstud
have
anchor
turn easier
for
several
turns.
Thethe
steel
stud
screw
completely
will again
compressed
feel tight
against
when
the
legs
back
have
of anchor
the
screw will
again
feel tight
whenstud
the
legs
completely
drywall.
Stop
compressed
turning
the against
steel
theanchor
backhave
ofscrew
the
completely
compressed
theanchor
back ofscrew
the
drywall.
at
that point.
Stop
turning the against
steel stud
drywall.
Stop turning the steel stud anchor screw
at
that point.
Do
not point.
overtighten the steel stud anchor screw.
at that
Do not overtighten the steel stud anchor screw.
Remove
the overtighten
steel stud anchor
screws
set screw.
them
Do not
the steel
stud and
anchor
Remove the steel stud anchor screws and set them
aside.
Remove
aside. the steel stud anchor screws and set them
aside.Steel stud anchors may come with small paper
Steel
washers.
stud You
anchors
may may
leavecome
themwith
on the
small
screw
paper
or
Steel
stud
anchors
come
with
small
paper
washers.
discard
them.
You
These
may may
leave
small
them
paper
onwashers
the
screw
door
not
5 leave them on the screw or
washers.
You These
may
discard
replace them.
standard
/16″ small
washers.
paper washers do not
5
discard
These
paper washers do not
replace them.
standard
/16″ small
washers.
replace standard 5/16″ washers.
10
Page
10
Page 10
Page 10
Visit the Premier Mounts website at http://www.premiermounts.com
Visit the Premier Mounts website at http://www.premiermounts.com
Visit the Premier Mounts website at http://www.premiermounts.com
Installation Instructions
Installation Instructions
Installation Instructions
Installing the Wall Plate (cont’d)
P5080T
Installing the Wall Plate (cont’d)
Step 5
­­ Align the wall plate over the steel stud anchor sleeves.
®­ Insert a steel stud anchor screw and a / ″ washer into
5
¯­
16
each steel stud anchor sleeve.
Use a Phillips screwdriver and tighten each steel stud
anchor screw until it is snug.
Do not overtighten the steel stud anchor screws.
Do not use a power drill to tighten the steel stud anchor
screws.
Proceed to the “Installing the Mounting Bracket”
section.
Installing the Mounting Bracket
Selecting the Mounting Hardware
­­ Insert the Thread Depth Indicator into the thread
®­
¯­
°­
inserts found on the bottom or top of the flat panel.
Use a pencil to mark the depth of the thread insert
on the Thread Depth Indicator, as shown in Figure
1.
Insert the Thread Depth Indicator into the remaining
thread inserts to compare and verify their depth.
Locate the correct diameter screw for the thread
insert.
If the screw you selected is longer than the mark
on the Thread Depth Indicator, as shown in Figure
2 and Figure 3, do not use this screw. The screw
length must not bypass the mark.
±­ Test each size of the screws provided.
The correct screws should thread easily into the
mount point and not pull out when tension is
applied.
Proceed to the “Universal Washer Installation”
section.
Small Straw
or Toothpick
Small Straw
or Toothpick
11
Installation Instructions
Visit the Premier Mounts website at http://www.premiermounts.com
Page 11
Installing the Mounting Bracket (cont’d)
Installing the Mounting Bracket (cont’d)
P5080T
Universal Washer Installation
This
mount’s
universal
washers
are designed
to to
Premier
Mounts’
Universal
Washers
are designed
accomodate
accommodatethe
thevarious
variousM4,
M4,M5,
M5,M6
M6and
andM8
M8hole
hole
sizes
flat panels.
panels.
sizes required
required by
by flat
M8
M5, M6
M4
Do not place excessive pressure on the back of
the flat panel, as this may damage your flat panel.
The Universal Washer must be installed between
the head of the mounting screw and the mounting
bracket as shown.
Does your flat panel have:
●
●
●
●
Recessed mount points?
Uneven mount points?
A curved back?
Any obstruction near the mount point?
If Yes, you must install Universal Spacers. Remove the
mounting brackets, Universal Washers, and mounting
screws from the back of the flat panel. Proceed to the
“Universal Spacer Installation” section.
Mounting Screw
Universal Washer
If No, skip to the “Locking Screw Installation”
section.
Mounting Bracket
Universal Spacer Installation
Flat Panel
Premier
Mounts’
Universal
Spacers
allow
to
This
mount’s
universal
spacers
allow
youyou
to attach
the
attach thebracket
mounting
to flat
panels
which
have or
mounting
tobracket
flat panels
which
have
recessed
recessed
or uneven
mount
Each
Universal
uneven
mount
points.
Eachpoints.
universal
spacer
ads 1/4” to the
Spacer
adds
¼˝
to
the
distance
between
distance between the mounting bracket the
andmounting
your flat panel.
bracket and your flat panel.
Universal Spacer
Mount Point
The Universal Spacers must be stacked and
oriented as shown.
The Universal Spacers must only be installed
between the mounting bracket and the flat panel.
The Universal Spacers will fit M4, M5, M6 and M8
screw sizes.
Proceed to the “Locking Screw Installation” section.
1˝
¼˝
12
Page 12
Visit the Premier Mounts website at http://www.premiermounts.com
Installation Instructions
P5080T
Installing the Mounting Bracket (cont’d)
Installing the Mounting Bracket (cont’d)
Locking Screw Installation
You must install the locking screws before you
attach the mounting bracket to the back of the flat
panel. The locking screws consists of two (2) M6 x
120mm screws.
Thread one (1) locking screw into the bottom mounting
hole on each of the mounting brackets. Make sure the
locking screw is securely threaded into the mounting tab
before proceeding.
Do not thread the locking screw any further once
it is even with the mounting tab. Threading the
locking screw any further will prevent you from
safely attaching the flat panel to the wall plate.
Locking Screw
Correctly Threaded
Proceed to the “Attaching the Mounting Bracket to
the Flat Panel” section.
Locking Screw
Threaded Too Far
Lock-It™ Security Barrel Installation (Optional)
Optional security configurations include:
- PCB-CSL1 (sold separately)
- Padlock (Combination or Keyed; commercially
available)
Please read the following directions to install the
security barrel:
Mounting Tab
Lock-It™
Security
Tube
the locking screw from the mounting
­­ Remove
bracket.
the locking screw into and through the
®­ Place
security barrel (see illustration below).
¯­ To secure the locking screw from being accessed,
°­
±­
place the screw with the security barrel into and
through the Lock-It™ Security Tube.
Re-insert the locking screw and security
components into the mounting bracket.
Tighten the locking screw and security components
until seated in the mounting tab.
Do not thread the locking screw any further once
it is even with the mounting tab (see illustration to
the right). Threading the locking screw any further
will prevent you from safely attaching the flat
panel to the wall plate.
Do not overtighten the locking screw.
Proceed to the “Attaching the Mounting Bracket to
the Flat Panel” section.
Locking Screw
Lock-It™ Security
Barrel
13
Installing the Mounting Bracket (cont’d)
Attaching the Mounting Bracket to the Flat Panel
Attaching the Mounting Bracket to the Flat Panel
This section assumes that you have read and
understood
sections:
This sectionthese
assumes
that you have read and
understood these sections:
Selecting the Proper Mounting Hardware
Selecting the Proper Mounting Hardware
Universal Washer Installation
Universal Washer Installation
Universal Spacer Installation
Universal Spacer Installation
­­ Place your flat panel screen-side down on a soft, flat
Place your flat panel screen-side down on a soft, flat
­­ surface.
surface.the number and location of the thread
®­ Identify
inserts
back of
your
flat panel.
thethe
number
and
location
of the thread
®­ Identifyon
inserts
on
the
back
of
your
flat
panel.
¯­ Align the holes on each mounting bracket with the
inserts
back
of your flat
panel.
Align the
holesononthe
each
mounting
bracket
with the
¯­ thread
thread
inserts
on
the
back
of
your
flat
panel.
°­ Secure each mounting bracket to your flat panel by
a minimum
of two
(2) screws
Secure each
mounting
bracket
to your per
flat bracket.
panel by
°­ inserting
inserting a minimum of two (2) screws per bracket.
Do not overtighten the mounting hardware.
Do not overtighten the mounting hardware.
●
●
●
●
●
●
Proceed to the “Attaching the Flat Panel to the Wall
Plate”
section.
Proceed
to the “Attaching the Flat Panel to the Wall
Plate” section.
Attaching the Flat Panel to the Wall Plate
Attaching the Flat Panel to the Wall Plate
This section requires two people.
This section requires two people.
Do not release your flat panel until you are certain
that
therelease
top andyour
bottom
of both
Do not
flat hooks
panel until
youmounting
are certain
brackets
areand
securely
seated
upper
and
that the top
bottom
hookson
ofthe
both
mounting
lower
mounting
rails ofseated
the wallonpanel.
brackets
are securely
the upper and
lower mounting rails of the wall panel.
­­ Raise the flat panel past the top and bottom
on thepast
wallthe
panel.
Raise the rails
flat panel
top and bottom
­­ mounting
mounting
rails
on the
wallslowly,
panel.keeping it close to
the flat
panel
down
®­ Slide
wall.
Slide
the flat panel down slowly, keeping it close to
®­ the
the
wall. the top and bottom mounting brackets to
¯­ Connect
rails ofthe
thetop
wall
plate.
Connect
and
bottom mounting brackets to
¯­ the
the rails
of the
wall plate.Bracket Adjustments”
Proceed
to the
“Mounting
section.
Proceed to the “Mounting Bracket Adjustments”
section.
14
P5080T
P5080T
P5080T
Mounting Bracket Adjustments
Mounting Bracket Adjustments
Leveling Screw Adjustment
If your flat panel is tilted too far to one side, the leveling
screws will allow you to compensate for this tilt by
adjusting the screws with a screwdriver.
­­ Loosen both locking screws.
®­ Adjust the tilt of your flat panel.
¯­ Tighten both locking screws.
M6 x 30mm
Leveling Screw
(1 per Bracket)
Caution!
It is possible to dislodge your flat panel while you
level your flat panel. Use extreme caution until
you tighten the locking screws.
Locking Screw Adjustment
After you have finished leveling your flat panel, be sure
to tighten the two (2) M6 x 120mm locking screws.
Do not overtighten the locking screws.
M6 x 120mm
Locking Screw
(1 per Bracket)
Tilt Adjustment
Adjusting the Flat Panel Friction Tilt Angle
­­ Place one hand at the center-top edge of the flat
panel.
®­ Place the other hand on the center-bottom edge of
¯­
the flat panel.
Using the upper hand, gently pull the top of the
flat panel towards you while the lower hand gently
pushes the bottom of the flat panel away from you.
Adjusting the Flat Panel to the Original Position
­­ Place one hand at the center-top edge of the flat
®­
¯­
panel.
Place the other hand on the center-bottom edge of
the flat panel.
Using the upper hand, gently push the top of the flat
panel towards the wall while the lower hand gently
pulls the bottom of the flat panel away from the wall.
15
Installation Instructions
Visit the Premier Mounts website at http://www.premiermounts.com
Page 15
P5080T
P5080T
Utilizing the Security Barrel
Utilizing the Security Barrel
Utilizing the Security Barrel
Your P5080T Mount includes one (1) Security Barrel
TW-84.1
Your
P5080T
Mount includes
(1)which
Security
and one
(1) Lock-It™
Securityone
Tube
canBarrel
provide
and one (1)
Lock-It™
Security
Tubeflat
which
can provide
additional
theft
deterrence
for your
panel.
additional theft deterrence for your flat panel.
PCB-CSL1 Security Cable PCB-CSL1 Security Cable Thread the cable through the hole on the security
Thread the cable through the hole on the security
barrel.
barrel.
Attach the PCB-CSL1 locking mechanism and
Attach
PCB-CSL1
locking
mechanism and
secure the
it using
the supplied
key.
secure it using the supplied key.
Padlock Padlock Place the locking hook through the hole of the
Place
thebarrel.
locking hook through the hole of the
security
security barrel.
Snap lock and locking hook together.
Snap lock and locking hook together.
PCB-CSL1
PCB-CSL1
Padlock
(Combination
or Keyed)
Padlock
(Combination or Keyed)
Technical Specifications
Technical Specifications
All measurements are in inches [millimeters].
All measurements are in inches [millimeters].
16
Page 16
Page 16
Visit the Premier Mounts website at http://www.premiermounts.com
Visit the Premier Mounts website at http://www.premiermounts.com
Installation Instructions
Installation Instructions
PRODUCT LIMITED WARRANTY
If a Séura, Inc. (“Séura”) Product (the “Product” or “Products”) fails to work or operate properly because of a defect in materials or workmanship, Séura will, for the length of the period indicated
below, (starting on the date of the customer’s purchase receipt for the Product), at its option, either; (a) repair the Product with new or refurbished parts onsite or at Séura’s factory, including Séura’s
labor if applicable; or (b) replace the Product with a new or refurbished Product; or (c) refund of the lesser of a pro rata share of the current MSRP as determined by the remainder of the warranty
period if replacement of the Product is not commercially feasible. The remedy chosen will be in good faith and at the discretion of SÉURA.
Séura warrants Lighted Mirrors with respect to Séura’s Labor for three (3) years; Mirror, Glass, Structure, Frame, and Assembly for three (3) years; Electrical for five (5) years; LED light strips for five (5)
years. Fluorescent Lamps are not warranted.
Séura warrants TV Mirrors with respect to Séura’s Labor for three (3) years; Mirror, Glass, Structure, Frame, and Assembly for three (3) years; TV including remote and power supply for two (2) years.
Séura warrants Lighted TV Mirrors with respect to Séura’s Labor for three (3) years; Mirror, Glass, Structure, Frame, and Assembly for three (3) years; electrical excluding TV for five (5) years; LED light
strips for five (5) years. TV including remote and power supply for two (2) years. Fluorescent Lamps are not warranted.
Séura warrants Indoor Waterproof TVs with respect to Séura’s Labor for three (3) years; Glass, Structure, Frame, and Assembly for three (3) years; TV including remote and power supply for two (2) years.
Séura warrants Outdoor TVs with respect to Séura’s Labor for two (2) years; Glass, Structure, Frame, and Assembly for two (2) years; TV including remote and power supply for two (2) years.
Séura warrants Indoor and Outdoor TV Mounts for two (2) years against defects in original hardware and/or workmanship. Excludes corrosion or rust resulting from damaged, scratched or chipped
paint or other surfaces. Séura warrants Protective TV Covers for two (2) years against material and/or workmanship defects. Excludes normal wear & tear. This Limited Warranty extends only to the original purchaser of a Product and only covers a Product purchased new. Séura reserves the right to require any warranty claimant to produce the original
purchase receipt or other original purchase date proof as may be reasonably required by Séura to verify the Product’s warranty eligibility.
1. Exceptions to Warranty: Séura does not warrant the Products against defects arising out of, related to, or caused by, whether totally or partially, and whether directly or indirectly, any
of the following:
A.Failing to properly clean and maintain, any Product, part or component of a Product, including, but not limited to, filters, front bezel, and other Product areas or components;
B.A Product’s extended use, including particularly, commercial applications, where a Product is operating on average more than twelve (12) hours per day on a permanent or extended periodic
basis;
C.Circumstances, damage (including concealed damage) or other conditions occurring during shipment of a Product or at any time after a Product leaves Séura’s facility;
D.Circumstances, damage or other conditions occurring during unpacking and/or removal of a Product from its original packaging, including the removal of protective material;
E.Circumstances, damage or other conditions occurring during transport of the Product to or from Séura before or after authorized service. Products must be packed properly using original
packaging or Séura replacement or pre-authorized packaging. Customer assumes all risk, and costs, including transportation costs, while Product is in transit to or from Séura.
F. Improper, incorrect, or insufficient AC supply voltage to a Product;
G.Alterations, modifications, including use of unauthorized mount, or changes to a Product without Séura’s prior written authorization;
H.The incorporation of a Product into or within a Product of a third party, without Séura’s prior written authorization;
I.A Product’s misuse, neglect use, abuse, or improper operation, including the failure to follow a Product’s normal and ordinary operating instructions;
J.The effects of fire, flood, lightning, electrical surges, water and other liquid infiltration, smoke, insect or animal infestation, sand, mud, chemicals, improper cleaning agents and other
substances not intended to come into contact with a Product, including any such substances contact with a Product as the result of acts of God;
K.The improper or faulty installation, setup, or adjustment of a Product;
L.A Product’s repair, attempted repair, or total or partial disassembly by any party other than a Séura authorized service representative;
M.When the Product occurs with pixel errors within the specified and permitted area. For more information about this, inquire directly with Séura regarding the Séura Pixel Policy.
N.Corrosion that does not affect the performance of a Product or the reasonable cosmetic appearance of a Product; and
O.Scratches or other paint or finish damage to a Product that lead to or are caused by, in part or in total, corrosion.
P. When a Lighted Mirror or Lighted TV Mirror using LEDs retains an overall brightness greater than 70% of the original brightness, including cases whereas an individual LED fails.
Q.Lack of proof of original proof of purchase.
R.Damage due to exhausted or incorrectly installed batteries.
2. Warranty Disqualifiers. This Limited Warranty does not apply, and Séura makes no warranties or representations, with respect to any Product being free from defects in materials or workmanship if the Product was purchased from a seller who is not authorized, by Séura, to sell Séura Products, is owned by or is in possession of an individual or entity who is not the original purchaser
of the Product, or if the Product’s original Séura serial number has been removed, defaced, replaced, or otherwise tampered with in any manner.
3. Limitation of Liability. THE SPECIFIC TERMS OF THIS LIMITED WARRANTY ARE IN LIEU OF ALL OTHER WARRANTIES, ORAL, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR USE. SÉURA WILL NOT BE LIABLE FOR ANY DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECT
IN THE PRODUCT, DAMAGES BASED ON INCOVENIENCE, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH BUSINESS RELATIONSHIPS, OR OTHER
COMMERCIAL LOSS, EVEN IF THE CUSTOMER HAS BEEN ADVISED OF THE POSSIBLITY OF SUCH DAMAGES. SÉURA WILL NOT BE LIABLE FOR ANY LOSS, DAMAGE OR LIABILITY
OR ANY DIRECT, INCIDENTAL, INDIRECT, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OR MISUSE OF A PRODUCT, OR ARISING OUT OF ANY
BREACH, BY THE PURCHASER OF A PRODUCT, OF THIS LIMITED WARRANTY. SÉURA SHALL NOT BE LIABLE FOR ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.
SÉURA SHALL NOT BE LIABLE FOR ANY VERBAL WARRANTY ASSURANCES MADE BY A SÉURA EMPLOYEE OR A SÉURA AUTHORIZED DISTRIBUTOR, RESELLER OR INSTALLER
THAT CONFLICTS WITH OR ENHANCES THE WRITTEN WARRANTY HEREIN. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, OR LIMITATIONS ON HOW LONG AN IMPLIED LIMITED WARRANTY LASTS, SO THE EXCLUSIONS MAY NOT APPLY TO A PARTICULAR PURCHASER. NOTWITHSTANDING
ANYTHING CONTAINED IN THIS LIMITED WARRANTY TO THE CONTRARY, SÉURA’S MAXIMUM AGGREGATE LIABILITY TO A PURCHASER RELATED TO ANY WARRANTY CLAIM OR
ALLEGATION OF A DEFECT WITH RESPECT TO A PRODUCT SHALL NOT EXCEED THE THEN CURRENT SÉURA WHOLESALE PRICE OF THE SPECIFIC PRODUCT FROM WHICH THE
WARRANTY CLAIM DERIVES.
NOTICE OF ANY WARRANTY CLAIM MUST BE RECEIVED BY SÉURA, IN WRITING, PRIOR TO THE EXPIRATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. THE PRODUCT WARRANTY APPLIES ONLY FOR THE PERIODS SET FORTH ABOVE.
4. Warranty Procedure. A warranty claimant must contact Séura at 920-857-9069 for a diagnostic. Please have your Product receipt available. At that time, Séura will provide technical support
over the phone to attempt to fix the problem. If unsuccessful, a Séura Representative will determine if the Product will be serviced onsite, replaced, or returned to Séura’s factory in Green Bay,
Wisconsin for repair.
•Toll-Free Technical Support: Please call 1-800-957-3872 to speak with a Séura Technical Support Representative. Séura Representatives are available Monday-Friday, 8:00am-4:30pm
Central Time.
•Onsite Service: If Technical Support determines the problem may be fixed onsite, a Séura service agent will be scheduled within 24 hours to service the unit. A Séura representative will work
with the customer to schedule a convenient time for onsite service. Parts may be sent to the customer’s location. Onsite service is available in the United States during normal business
hours Monday – Friday, unless other special circumstances exist and special arrangements are made.
•Factory Service: If Technical Support determines the Product must be sent back to Séura’s factory for repair, the customer must follow return instructions below. Séura will ship the
repaired Product to the authorized reseller, installer or customer’s address. This warranty does not cover removal or installation costs of Products.
•Advanced Replacement: If Technical Support determines the Product must be replaced, Séura will ship a new Product to the authorized reseller, installer or customer’s address. The customer must follow return instructions below to send the damaged Product back to Séura’s factory. Credit card information will be collected before shipment of the replacement Product. If
Séura does not receive the original Product back within thirty (30) days of shipping the replacement Product, the credit card on file will be charged at full MSRP. This warranty does not cover
removal or installation costs of Products.
Return Instructions: If return is necessary, Séura will issue a return goods authorization (RGA) number and, if applicable, specific return and shipping instructions. A Product will only be accepted
for warranty claims if returned and shipped to Séura in the Product’s original packaging materials. If original packaging is not available, please contact Séura to receive authorized replacement
packaging. Packages not bearing the issued returned goods authorization (RGA) number will not be accepted by Séura and will be returned to sender. In addition to the Product, the package
must include the warranty claimant’s original sales receipt for the purchase of the Product. All Product returns shall be received by Séura, at 1230 Ontario Road; Green Bay, WI 54311 with freight
prepaid by the warranty claimant. Séura shall not be responsible for, and the warranty claimant assumes and retains all such responsibility, any damage or loss to or of the Product during shipment to and from Séura as the result of a warranty claim.
5. Exclusive Remedy. This Limited Warranty sets forth the exclusive remedies of a warranty claimant with respect to allegations of a defective Product.
17
Notes
18
Notes
19
800-957-3872
Séura, Inc.
1230 Ontario Road
Green Bay, WI 54311
800.95.SEURA
t: 920.857.9069
f: 920.857.9490
© Séura 2017
All Rights Reserved
4/4/17
w w w. s eur a .c o m