AT15-801/802/804
Band IV/V low power superturnstile antennas
UHF Superturnstile Antennas for TV applications offer a broadband omnidirectional radiation pattern with excellent
circularity, combined with a minimum wind load impact on the supporting mast.
These antenna systems are ideal for top-mounting, and they are supplied ready for installation, fully assembled and
enclosed in a GRP cylinder.
Electrical Specifications
Peak gain (ref. λ/2 dipole)
3 dB vertical beam width (mid-band)
Maximum power handling RMS
Connector type
(1)
Pressurization
AT15-802
470-860 MHz
≤ 1.15:1
50 Ohm
Horizontal
1 Bay
2 Bays
5 dBd
8 dBd
25º
11º
2 kW
2 kW / 5 kW
EIA 7/8" male /
EIA 7/8" male
EIA 1 5/8" male
Not pressurized
AT15-804
TV UHF AT15-801
Frequency range
VSWR
Impedance
Polarization
4 Bays
11 dBd
5.5º
5 kW / 10 kW
EIA 1 5/8" male /
EIA 3 1/8" male
Mechanical & Environmental Specifications
Batwings
Connectors
Materials
Isolators
Radome
Radome dimensions (Ø X H)
Weight
Wind Load @ 160 Km/h
Maximum wind speed
Grounding
Temperature range
Humidity
Aluminium
Aluminium and brass
PTFE
Fiberglass
323 x 1200 mm
27 kg
323 N
323 x 2300 mm
53 kg
726 N
220 km/h
DC grounded
-40°C to +80°C
100%
RYMSA RF will reserve the right to make any changes without notice.
323 x 4600 mm
116 kg
1228 N
NOTES:
(1) Other
request.
connector
types
under
Others gain values and power handling
can be supplied. Please, ask RYMSA RF.
E-mail: info@rymsarf.com
Web: www.rymsarf.com