Increase Your Cell Phone Signal in Your Home or Office with Wi

Increase Your Cell Phone Signal in
Your Home or Office with Wi-Ex
Designed for consumers, the zBoost cell phone signal booster extends a zBoost Cell Zone for single or multiple
users in homes or offices. Comes in three models - one for PCS phones, one for CELLULAR phones and one
Dual-Band – that covers all phones except Nextel. Package includes everything you need -- amplifier base unit,
power supply, base unit antenna, low-loss SATV coaxial cable (RG6), signal antenna and mounting hardware. The
omni-directional antennas are easy to orient and receive from multiple cell towers.
Benefits include:
•
zBoost YX500- PCS model significantly improves all 6 PCS sub-bands
•
zBoost YX500-CEL model significantly improves both Cellular sub-bands
•
zBoost Dual-band model improves all 6 PCS sub-bands and both Cellular
sub-bands
•
Increases your indoor cell signal coverage – up to 3000 sq feet
(Multiply this with optional upgrades)
•
Decreases dropped or missed calls
•
Easy to install – comes complete
•
Staying wireless - no cradle or connections to your phone
•
Extends phone battery life (uses less power when signal is stronger)
•
Works with most phones and carriers (maintains network integrity)
•
Manufactured in the USA with the highest quality control –
(individually calibrated)
Zboost base unit
zBoost DUAL BAND PRODUCT SPECIFICATIONS
At 1900MHz (PCS)
Frequency
PCS Bands
Network Format
System Gain
Composite Output Power Limit - EiRP
Signal Delay
Uplink
Downlink
1850-1910MHz
1930-1990MHz
ALL: A,D,B,E,F & C
CDMA, GSM, TDMA, GPRS, EDGE, 1xRTT, EVDO
55dB
78dB
24dBm
13dBm
140ns
130ns
Antenna - Signal
Antenna – Base Unit
Cable Loss
5dBi Colinear; F-type female
2dBi ½ wave dipole; TNC male
6dB (50 feet of 75ohm, 3000MHz RG-6)
At 800 MHz ( CEL)
Frequency
PCS Bands
Network Format
System Gain
Composite Output Power Limit - EiRP
Noise Figure
Uplink
Downlink
824-849MHz
869-894MHz
ALL: a&b
CDMA, GSM, TDMA, AMPS, GPRS, EDGE, 1xRTT, EVDO
54dB
67dB
26dBm
10dBm
5dB
5dB
Antenna - Signal
Antenna – Base Unit
Cable Loss
3dBi Colinear; F-type female
2dBi ½ wave dipole; TNC male
6dB (50 feet of 75ohm, 3000MHz RG-6)
Both –CEL and PCS
Base Unit RF connectors
Wall Supply Input
Power Consumption
System Certifications
Base Unit size and weight:
Operating Conditions
Coverage (open areas)
F-type female and TNC female
100-200VAC 60Hz
2W standby, 5.5W max signal
UL, FCC Parts 15 & 24 (PCS), FCC Parts 15 & 22 (CEL), Industry Canada
5” x 7” x 2” - 12 oz.
O
O
o
Indoors Use Only 5 to 40 C (40 to 105 F)
4-5 signal bars at roof antenna; 60’ diameter at 3-4 bars inside; over 3,000 sq. ft circle
Handles all PCS or CEL protocols and includes multiple patent pending technologies to provide low-cost coverage while continually adapting
to signals to prevent interference and remain transparent to the wireless network. Provides an indicator if the antennae are positioned
improperly, but will NOT suffer damage or interfere with the Carrier Network.