Moxa EDS-408A-1M2S-SC network switch

Industrial Ethernet Solutions
EDS-405A/408A Series
5 and 8-port entry-level managed Ethernet switches
››Plug-n-Play Turbo Ring and Turbo Chain with fast recovery time
(under 20 ms)
››IGMP Snooping QoS, IEEE 802.1Q VLAN, SNMPv1/v2c/v3, RMON
supported
››Automatic warning by exception through e-mail, relay output
››User-friendly web-based configuration and management
››ABC-01 (Automatic Backup Configurator) for system configuration
backup (optional accessory)
Introduction
The EDS-405A/408A are entry-level 5 and 8-port managed Ethernet
switches designed especially for industrial applications. The switches
support a variety of useful management functions, such as Turbo
Ring, Turbo Chain, ring coupling, port-based VLAN, QoS, RMON,
bandwidth management, port mirroring, and warning by email or relay.
The ready-to-use Turbo Ring can be set up easily using the web-based
management interface, or with the DIP switches located on the top
panel of the EDS-405A/408A switches.
Features and Benefits
•
•
•
•
IPv6 Ready logo awarded (IPv6 Logo Committee certified)
DHCP Option 82 for IP address assignment with different policies
Modbus/TCP industrial Ethernet protocol supported
Turbo Ring and Turbo Chain (recovery time < 20 ms at full load),
and RSTP/STP (IEEE 802.1w/D)
• IGMP snooping and GMRP for filtering multicast traffic
Specifications
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1p for Class of Service
IEEE 802.1Q for VLAN Tagging
Protocols: IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/
Client, TFTP, SNTP, SMTP, RARP, RMON, HTTP, Telnet, Syslog,
DHCP Option 66/67/82, BootP, LLDP, Modbus/TCP, IPv6
MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Bridge MIB, RSTP
MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE 802.3x flow control, back pressure flow control
Switch Properties
MAC Table Size: 2 K (EDS-405A), 8 K (EDS-408A)
Packet Buffer Size: 1 Mbit
Interface
Fiber Ports: 100BaseFX ports (SC/ST connector)
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex
mode, and auto MDI/MDI-X connection
Console Port: RS-232 (RJ45 connector)
DIP Switches: Turbo Ring, Master, Coupler, Reserve
LED Indicators: PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL,
10/100M
Alarm Contact: 1 relay output with current carrying capacity of 1 A @
24 VDC
1
• Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network
planning
• QoS (IEEE 802.1p and TOS/DiffServ) to increase determinism
• RMON for efficient network monitoring and proactive capability
• SNMPv1/v2c/v3 for different levels of network management
security
• Bandwidth management to prevent unpredictable network status
• Port mirroring for online debugging
Optical Fiber
100BaseFX
Multi-mode
Single-mode
Wavelength
1300 nm
1310 nm
Max. TX
-10 dBm
0 dBm
Min. TX
-20 dBm
-5 dBm
RX Sensitivity
-32 dBm
-34 dBm
Link Budget
12 dB
29 dB
Typical Distance
5 km a
4 km b
40 km c
Saturation
-6 dBm
-3 dBm
a. 50/125 μm, 800 MHz*km fiber optic cable
b. 62.5/125 μm, 500 MHz*km fiber optic cable
c. 9/125 μm single-mode fiber optic cable
Power Requirements
Input Voltage: 24 VDC (12 to 45 VDC), redundant dual inputs
Input Current:
EDS-405A: 0.24 A @ 24 V
EDS-405A-MM/SS: 0.32 A @ 24 V
EDS-408A: 0.26 A @ 24 V
EDS-408A-MM/SS: 0.35 A @ 24 V
EDS-408A-3M/3S/2M1S/1M2S: 0.32 A @ 24 V
Overload Current Protection: Present
Connection: 1 removable 6-contact terminal block
Reverse Polarity Protection: Present
w w w. m o x a . c o m
info@moxa.com
Industrial Ethernet Solutions
Physical Characteristics
EMS:
EN61000-4-2 (ESD), level 3; EN61000-4-3 (RS), level 3;
EN61000-4-4 (EFT), level 3; EN61000-4-5 (Surge), level 3;
EN61000-4-6 (CS), level 3; EN61000-4-8
Maritime:
EDS-405A, EDS-405A-MM, EDS-405A-SS: DNV, GL
EDS-408A, EDS-408A-MM, EDS-408A-SS: DNV, GL
EDS-408A-3M/3S/2M1S/1M2S: DNV, GL, ABS, LR, NK
Rail Traffic: EN50121-4 (EDS-408A series only)
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Housing: Metal, IP30 protection
Dimensions: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in)
Weight:
EDS-405A, EDS-405A-MM, EDS-405A-SS: 650 g
EDS-408A, EDS-408A-MM, EDS-408A-SS: 650 g
EDS-408A-3M/3S/2M1S/1M2S: 890 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Note: Please check Moxa’s website for the most up-to-date certification status.
MTBF (meantime between failures)
Regulatory Approvals
Safety: UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1
Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and
D (EDS-408A-3M/3S/2M1S/1M2S Pending); ATEX Zone 2, Ex nC IIC
(EDS-408A-3M/3S/2M1S/1M2S Pending)
EMI: FCC Part 15, CISPR (EN55022) class A
Time:
EDS-405A Series: 392,000 hrs
EDS-408A Series: 363,000 hrs
Database: Telcordia (Bellcore), GB
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Dimensions
30.0 mm
(1.2 in)
44.0 mm (1.7 in)
46.6 mm 23.6 mm
(1.8 in) (0.9 in)
48.3 mm
(1.9 in)
39.5 mm
(1.6 in)
135.0 mm (5.3 in)
35.0 mm (1.4 in)
105.0 mm (4.1 in)
46.0 mm (1.8 in)
25.4 mm
(1.0 in)
66.8 mm
(2.6 in)
9.0 mm
(0.4 in)
13.1 mm 15.1 mm
(0.5 in) (0.6 in)
7.8 mm 30.5 mm
(0.3 in) (1.2 in)
7.8 mm
(0.3 in)
45.8 mm (1.8 in)
53.6 mm (2.1 in)
Side View
Front View
Rear View
DIN-Rail/Panel
Mounting Kit
Ordering Information
Available Models
Port Interface
Standard Temperature
Wide Temperature
(0 to 60˚C)
(-40 to 75˚C)
100BaseFX
10/100BaseT(X)
Multi-mode,
Multi-mode,
Single-mode,
SC Connector
ST Connector
SC Connector
EDS-405A/408A
EDS-405A/408A-T
5/8
–
–
–
EDS-405A/408A-MM-SC
EDS-405A/408A-MM-SC-T
3/6
2
–
–
EDS-405A/408A-MM-ST
EDS-405A/408A-MM-ST-T
3/6
–
2
–
EDS-408A/405A-SS-SC
EDS-408A/405A-SS-SC-T
3/6
–
–
2
EDS-408A-3M-SC
EDS-408A-3M-SC-T
5
3
–
–
EDS-408A-3M-ST
EDS-408A-3M-ST-T
5
–
3
–
EDS-408A-3S-SC
EDS-408A-3S-SC-T
5
–
–
3
EDS-408A-2M1S-SC
EDS-408A-2M1S-SC-T
5
2
–
1
EDS-408A-1M2S-SC
EDS-408A-1M2S-SC-T
5
1
–
2
Optional Accessories (can be purchased separately)
MXview: Moxa industrial network management software with 50, 100, 250, or 500 nodes
EDS-SNMP OPC Server Pro: OPC server software that works with all SNMP devices
ABC-01: Configuration backup and restoration tool for managed Ethernet switches, 0 to 60°C operating temperature
DR-4524/75-24/120-24: 45/75/120 W DIN-Rail 24 VDC power supplies
MDR-40-24/60-24: 40/60 W DIN-Rail 24 VDC power supplies, -20 to 70°C operating temperature
WK-46: Wall mounting kit
RK-4U: 4U-high 19” rack mounting kit
2
© Moxa Inc. All Rights Reserved. Updated Aug. 26, 2010. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.