Dynex OPSYS MW 91000051 Specifications

We took a brite idea and
enhanced its performance.
Introducing
the TRIAD®
MULTIMODE
Plate Reader
from DYNEX
TRIAD® and TRIAD LT®
Multi-mode Plate Readers from
DYNEX are the brightest ideas
yet for the research laboratory
that needs high-performance
from a microplate reader.
Powered by innovative
DynaBrite digital LED based
technology, the TRIAD® series
of readers are extremely reliable
systems that combine fluorescence, luminescence and
absorbance capabilities in one
affordable package.
TM
TM
DynaBrite LED-Based
Detection Optics ensure excellent
instrument performance while providing a most
stable and rugged, low maintenance instrument
that can operate effectively in virtually any labo-
Excellent Performance Across
all Detection Modes
Virtually Maintenance Free
Design
Exceptionally Easy to Operate
and Maintain
Highly Intuitive Operating
Software
Best Value in Multimode
Detection
Backed by DYNEX’s Decades of
Experience in Microplate Readers
For Performance, Power & Price
look to TRIAD and TRIAD LT,
the newest and brightest lights in
microplate assay technology.
ratory environment with no signal degradation.
When used in combination with any of a wide
range of available filter slides, the DynaBrite
technology allows for customization and expansion
as needs change.With DynaBrite technology,
you’ll never have to change a bulb again.
P E R F O R M A N C E
•
P O W E R
•
P R I C E
For more details on this and other DYNEX products please contact Jencons-PLS Technical Office.
Tel: 01342 826836 Fax: 01342 826771 Email: techsales@jencons.co.uk
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤
01342 826771 Website➤
www.jencons.co.uk
Washers
Dynex Technologies, Multi-Reagent
96-Well Microplate Washers
New
701-013
The Multi-Reagent washer washes microplates in a 1x8 or 2x8 strip
format. It has a capacity of up to 4 different wash solutions, 40
user-definable wash protocols and 10 microplate settings.
■
8- and 16-channel wash heads/manifolds for
96-well microplates
■
Multiple reagent option – up to 4 different reagent lines for
laboratories with multiple users or assays with complex
wash sequences
■
Speed – a complete 96-well plate can be washed in under
30 seconds
■
Programmable – saves up to 40 programs with
10 plate types
■
Variable wash parameters – dispense volume, number of
dispense steps, wash fluid selection, soak time, aspirate time
and type and number of cycles
■
Clean cycle – each program can include a rinse cycle and
regular system flushes can be set up to run every 1 minute
to every 24 hours
■
Large wash and aspirate volume – 4 litre wash bottles are
available
■
Super aspirate – bottom aspirate with sweep feature ensures
minimal residual volume in wells
■
Fail safe mechanism – a full waste bottle causes an audible
alarm to sound and the washer pauses, protecting the
system from overflow damage
Specifications
Washing speed
Microplate formats
Manifolds/wash heads
Wash sequences/programs
Dispensing volumes
Dispensing precision
Residual volume per well
Soak time, seconds
Dimensions (wxdxh), mm
Electrical requirements
Weight, kg
Cat. No.
<60 seconds 1x8 format, <30 seconds 2x8 format
96-well
8- and 16-channel
40
50 - 2500µl (1µl increments)
±5%CV
<1µl U & V bottom plates, <5µl Flat bottom plates
1 to 999
432x340x170
110-120V or 220-240V, 50 or 60Hz
6.5
Description
Price
701-011 Multi-Reagent washer with 8- and 16-channel wash heads, pump,
2x2 litre reagent bottles, 2x4 litre waste bottles, tubing and all cables
701-012 Multi-Reagent washer with 8- and 16-channel wash heads, pump,
2x4 litre reagent bottles, 2x4 litre waste bottles, tubing and all cables
701-013 Multi-Reagent washer with 8- and 16-channel wash heads, pump,
4x2 litre reagent bottles, 2x4 litre waste bottles, tubing and all cables
POA
POA
POA
Take a look at our latest products on www.ecomcat.co.uk
619
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤
01342 826771 Website➤
www.jencons.co.uk
New
701-005
Washers
Dynex Technologies, Ultrawash PLUS
96-Well Microplate Washer
The Ultrawash PLUS is a fast, programmable 96-channel
microplate washer. It has on-board storage for 20 user-definable
wash protocols and 5 microplate type settings. The Ultrawash PLUS
is suitable for high volume applications.
The Ultrawash PLUS includes the pump, bottles, tubing, cables and
manual.
■
96-channel manifold for 96-well microplates
■
Speed – 96-well manifold washes a complete plate in as
little as 13 seconds
■
Programmable – saves up to 20 protocols and 5 plate types
■
Variable wash parameters – dispense volume, soak time,
aspirate time and number of wash cycles
■
High volume – 2x4 litre wash and waste bottles provide large
capacity and are held in a rack for easy handling
■
Clean cycle – additional fluid bottle allows a cleaning fluid to
be flushed through the system on demand
■
Quick fit connectors – both the tubing and dispense/aspirate
head can be quickly connected and disconnected
■
Overflow alarm – alerts user when waste is full and pauses
wash cycle
Specification
Washing speed
Microplate formats
Manifolds/wash heads
Number of wash liquid channels
Wash sequences/programs
Dispensing volumes
Dispensing precision
Residual volume per well
Soak time, seconds
Dispense bottle
Waste bottle
Dimensions (wxdxh), mm
Primary unit
Vacuum/pressure unit
Bottle holder
Electrical requirements
Weight, kg
Primary unit
Vacuum/pressure unit
Bottle holder
Adjustable 1–9
96-well, Flat, ‘U’, ‘V’ and ‘C’ shaped wells
96-channel
2 wash/rinse channels
20
50–500µl
±10%CV (with 200µl distilled water across 96 wells)
<3µl
0 to 90
2x4L container
2x4L container with level (full) sensor
201x409x249
178x305x242
160x541x130
230V, 60Hz, 6A*
7.98
8.16
1.54
* 115V versions are available, please contact our Technical Office for details on 01342 826836.
Cat. No.
Description
701-005 Ultrawash Plus 96-channel microplate washer supplied with pump,
bottle set and full tubing set
620
Take a look at our latest products on www.ecomcat.co.uk
Price
POA
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤
01342 826771 Website➤
www.jencons.co.uk
Washers
Dynex Technologies, OPSYS MW
Microplate Strip Washer
New
448-230
The OPSYS MW is an economical, fully featured 96-well microplate
strip washer that compliments the OPSYS MR microplate reader.
The OPSYS MW is an excellent choice for many laboratories due
to its simplicity, ease-of-use, flexible and intuitive protocol
definition. Choice of 12-way (row) or 8-way (column) microplate
washing for full plates or strips. These can be interchanged as an
optional extra.
■
8 or 12-channel wash heads/manifold for 96-well
microplates
■
Combine prime, dispense, soak and aspirate steps in any
order, defining the duration and repetition of each protocol
step
■
Define, name, save and password protect up to 10
microplate definitions for optimal wash performance
■
Sweep mode aspiration provided a ‘sweeping’ wash head
movement during aspiration to achieve reproducibly low
residual volumes
■
On-board self-diagnostic routines automatically assure operational performance
■
Compact dimensions conserve valuable bench space
■
CE marked
Specifications
Washing speed
Microplate formats
Manifolds/wash heads
Number of wash liquid channels
Wash sequences/programs
Dispensing volumes
Dispensing precision
Residual volume per well
Soak time, seconds
Dispense bottle
Waste bottle
Dimensions (wxdxh), mm
Electrical requirements
Weight, kg
Cat. No.
<4 min (typical 5-cycle wash protocol with 8-way wash head)
96-well
8 or 12-channel
1
Saves 40 named wash protocols
50–900µl (1µl increments)
±5%CV (with 300µl distilled water across 96 wells)
<1µl U & V bottom plates, <5µl Flat bottom plates
1 to 999
4L container
4L container with level (full) sensor
490x380x190
110–120V or 220–240V, 50 or 60Hz
9.1
Description
Price
448-230 OPSYS MW washer with 8-way wash heads and 2 wash lines
448-231 OPSYS MW washer with 12-way wash heads and 2 wash lines
POA
POA
Accessories
Cat. No.
Description
Price
448-232 Spare 8-way wash heads/manifold
448-233 Spare 12-way wash head/manifold
POA
POA
Other options and accessories are available, please enquire for details on 01342 826836.
Take a look at our latest products on www.ecomcat.co.uk
621
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤
01342 826771 Website➤
www.jencons.co.uk
700-240
Washers
Tecan, Columbus Strip Washer
The Columbus is a fully automated microplate strip washer, combining high flexibility with
excellent performance and ease of use. With the optional liquid detection manifold, the
barcode wand and a serial printer the Columbus provides full process control.
■ 8-, 12-, or 16-channel manifold for 96-well microplates
■
Up to four liquid channels, software selectable
■
Crosswise aspiration, overflow washing, bottom washing
■
Any liquid bottle can be used due to the non-pressurised dispensing and
aspirating system
■
Up to 30 methods can be stored for easy recall and operation
■
Programming of the instrument can be done either with the built in keyboard/display or by WinWash via a PC
Options include, liquid sensor, barcode pen, Columbus PC software, serial printer.
Optional Fill Verification
The optional fill verification manifold enables checking of liquid delivery to every single well.
This is conditional for positive process control.
Optional Control and Report
The Columbus can be integrated into a robotic system or automatic microplate processor. It
can be controlled through RS232 or optional RS485. Fill verification, barcode identification
and connected serial printer allows for complete documentation of microplate washing.
Specification
Washing speed
Microplate formats
Manifolds
Number of wash liquid channels
Washing programs
Dispensing volumes
Dispensing precision
Residual volume per well
“Overflow” washing mode
Cell washing mode
Robotic compatibility
Specialities
Dimensions (wxdxh), mm
Weight, kg
1 cycle, 300µl per well, 96 wells: less than 1 minute
96-well (384-well optional)
8, 12 or 16-channel
2 or 4 (depending on model ordered)
up to 30
50-3000µl in 50µl increments for washing
50-400µl in 50µl increments for dispensing
CV <±4%
<2 µl
Yes
Yes
Yes
4 different washing solutions in arbitrary reservoirs,
according to GLP standards
285x395x220
8.2
Cat. No
Description
700-240
700-280
700-281
700-282
700-283
700-284
Columbus strip washer with 8-way manifold and 2 wash lines
Columbus strip washer with 12-way manifold and 2 wash lines
Columbus strip washer with 16-way manifold and 2 wash lines
Columbus strip washer with 8-way manifold and 4 wash lines
Columbus strip washer with 12-way manifold and 4 wash lines
Columbus strip washer with 16-way manifold and 4 wash lines
Price
POA
POA
POA
POA
POA
POA
Options
Cat. No
Description
700-288
700-285
700-286
700-287
700-289
700-290
700-291
Manifold detection
Cell wash manifold, 8 channel
Cell wash manifold, 12 channel
Cell wash manifold, 16 channel
Serial printer
Barcode pen
‘Drip-mode’ cell wash
Price
POA
POA
POA
POA
POA
POA
POA
Other options and accessories are available, including fill verification, liquid sensor, aerosol protection.
Please enquire for details on 01342 826836.
A Columbus Pro model is also available. This model has IVDD compliance. Please contact our Technical
Office for details on 01342 826836.
622
Take a look at our latest products on www.ecomcat.co.uk
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤
01342 826771 Website➤
www.jencons.co.uk
Washers
Jencons, Millennium hw·2 Hand-Held
Microplate Washer
700-083
The Jencons Millennium hand-held microplate washer consists of a microplate
workstation, reservoir kit, pump module and a choice of manifold with either 8 or 12
ports. The microplate workstation incorporates a manifold priming tray.
The aspirate and dispense tubes are made of PEEK® - a special, chemically inert
material which will eliminate the possibility of delicate coatings being scratched from
the well’s surface. The special wash buffer dispense system, constructed without any
tube pinching or deformation, is designed for long lasting, reliable and leak-proof
operation.
A valve on top of the wash reservoir allows the adjustment of the dispense rate for
optimal wash results. The powerful built in pump is equipped with silencer and
humidity filter to guarantee quiet and long lasting reliable operation.
■
Accurate dispensing and low residual volumes
■
Adjustable dispense pressure with the turning of a screw valve
■
Adjustable suction force option
■
Filtered pump exhaust air
■
Colour coding for easy maintenance and system modularity
■
Fully autoclavable, metal-free fluid path
■
Light and reliable valve system
■
12V-DC remote power supply catering for input voltage variants
■
Optional allergen disc washing head (please enquire for details)
Specification
Wash and waste reservoir capacity, L
Weight of unit (with manifold), kg
Weight of pump module, kg
Dimensions, including a 2L reservoir (wxdxh), mm
Cat. No.
Description
2
4.8
3.0
250x300x250
Price
700-083 Millennium hw·2, hand-held microplate washer
with 8 port manifold
700-084 Millennium hw·2, hand-held microplate washer
with 12 port manifold
700-087 8 port manifold and reservoir kit
700-088 12 port manifold and reservoir kit
700-089 8 port manifold
700-090 12 port manifold
700-091 Vacuum and pressure module
700-093 Microplate workstation
POA
POA
POA
POA
POA
POA
POA
POA
Take a look at our latest products on www.ecomcat.co.uk
623
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤
01342 826771 Website➤
www.jencons.co.uk
Washer Fillers
Jencons, Millennium 1000
Microplate Washer Filler
700-190
The Millennium 1000 is a unique processor for fully automated
washing and filling of both 96- and 384-well microplates, in all
possible profiles.
It is designed to achieve fast and reliable microplate processing
with high precision and repeatability, whilst allowing the user a
multitude of individual adjustment possibilities.
700-186 shown
with
700-191
■
Accurate dispensing precision and low residual volumes
■
Optional aerosol protection cover
■
Unique open construction for easy integration with
robotic systems
■
Plate sweep for the lowest residual volumes
■
Up to 25 user-programmable wash protocols
■
Liquid level sensing in wash and waste reservoirs with
visual warning system
■
Extremely easy to clean and maintain
■
The Millennium 1000 accommodates all 96- and 384-well
microplates
■
RS232 port for robotic integration
■
The Millennium 1000 can be configured (at the time of production) for filter bottomed and/or deepwell microplates
■
Easy exchange of wash heads
■
Heads available in 8, 12, 16, 24 and 48 concentric tip configurations
■
Easy to read back illuminated full alphanumeric display
■
Operates on 12V DC, supplied via an external switch mode
power supply, thus enhancing operational safety
■
Separate dispense and aspirate channels reduce the possibility of cross contamination
■
Compact design
Specification
700-186
Operating voltage/Hz
Max current requirement, VA
Dispense reservoir
Waste reservoir, L
Residual volume
Precision
Dispensing volume 1
Speed, mins.
Weight of complete system, kg
Dimensions - complete system (wxdxh), mm
100–240V/50-60Hz
52
up to 3x2L
2
3µl per well typical action
1µl per well with sweep
CV ≤3%@300µl per well
25–1000µl in 25µl increments
2.5 2
9.2
350x650x350
1. Other volume ranges are available. Please contact our Technical Office on 01342 826836.
2. To complete a 3 wash cycle using a 12 channel washer, double head, 350µl per well, 96 wells.
624
Cat. No.
Description
700-186
700-187
700-188
700-189
700-190
700-191
Millennium 1000 8-channel washer (96-well plates)
Millennium 1000 12-channel washer (96-well plates)
Millennium 1000 16-channel washer (96-well plates)
Millennium 1000 24-channel washer (96-well plates)
Millennium 1000 48-channel washer (384-well plates)
Aerosol cover
Take a look at our latest products on www.ecomcat.co.uk
Price
POA
POA
POA
POA
POA
POA
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤
01342 826771 Website➤
www.jencons.co.uk
Fillers
Jencons, Millennium 500 Microplate Filler
700-184
The Millennium 500 is a unique processor for filling 96- and 384-well microplates.
It is designed to provide fast and reliable microplate filling with high precision and repeatability, along
with the flexibility to accommodate various customised requirements. Up to two different reagents can
be filled simultaneously or sequentially with a user adjustable incubation period between the fill sessions.
The Millennium 500 is primarily designed to fill a 96-well or a 384-well microplate but can be configured
(at the time of production) for deep-well microplates and tubes.
■
Accurate dispensing using a precision
peristaltic pump
■
Head and entire liquid path is easy to
disassemble for cleaning & autoclaving
■
Unique open construction for easy
integration with robotic systems
■
Reagent recovery feature eliminates any
wastage of reagents
■
Optional aerosol protection cover
■
■
Up to 25 user-programmable protocols
Works directly with any reagent reservoir
supplied by the user
■
Optional liquid level sensing in reagent reservoirs with audible and visual warning system
■
Easy to read, back illuminated full alpha
numeric display
■
Extremely easy to clean and maintain; tubing replacement within seconds
■
■
Quiet in operation
Operates on 12V DC, supplied via an external switch mode power supply, for
enhanced operational safety
■
RS232 port for robotic integration
■
■
8 & 16 individual channel head configuration
Moving dispense head allows accurate
filling from any height
700-184 shown
with
optional
700-191
Specification
Operating voltage/Hz
Max current requirement, VA
Dispense reservoir
Precision
Dispensing volume‡
Speed, sec.
Dimensions complete system (wxdxh), mm
Weight of complete system, kg
100–240V/50–60HZ
52
user specified
CV ≤3% @ 300µl per well
5-400µl in 2µl increments
18*
320x520x280
6.0
*
To fill a 96-well plate using an 8-channel filler, 300µl per well.
‡
Other volume ranges are available, eg. a unit configured to fill volumes from 25-1,000µl in 25µl increments can
be supplied, if specified at the time of ordering. Please contact our Technical Office for details on 01342 826836.
Cat. No.
Description
700-184
700-197
700-226
700-191
700-192
Millennium 500 8-channel microplate filler for 96-well plates
Millennium 500 16-channel microplate filler for 96-well plates
Millennium 500 16-channel microplate filler for 384-well plates
Aerosol cover
Optional liquid level sensing
Price
POA
POA
POA
POA
POA
Q Fill 2 Microplate Filler
The Q Fill 2 has been designed to rapidly and accurately fill 96-well, 384-well and 2ml deep-well plates.
For example, a 384-well plate can be conveniently filled in less than 20 seconds.
■ Programmable dispensing volume from 50µl
■ Autoclavable components for aseptic filling
to 1ml by 1.0µl increments, precision <3% CV
■ Various user-defined fill volumes
■
Space-saving compact design
■
Motorised plate table
■
Self-locating stainless steel, interchangeable
manifolds for easy alignment
■
Small footprint, allowing use inside a
laminar-flow cabinet
448-055
Specifications
Accuracy
Fill volume range, µl
Power supply
Dimensions (hxwxd), mm
Weight, kg
±5%*
20–2000
220–240V/50–60Hz
200x300x300
7
* determined at 25°C using 8% glycerol at a volume of 50µl
Cat. No.
Description
Price
448-055 Q Fill 2 microplate filler complete with 8-way and 16-way manifolds for
POA
standard 96- and 384-well plates respectively, 500ml reagent bottle and silicone tubing
448-056 8-way manifold for deep 96 well plates
POA
16-way manifolds and 1L reagent bottles are also available, please enquire for details on 01342 826836.
Take a look at our latest products on www.ecomcat.co.uk
625
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤
01342 826771 Website➤
www.jencons.co.uk
New
448-265
Readers
Dynex Technologies, OPSYS MR Microplate Reader
The OPSYS MR is a compact, economical microplate reader for endpoint analyses. It provides application
flexibility and comprehensive data reduction options, yet is well within the budget requirements of most
research, pharmaceutical, biotechnology or clinical laboratories. The OPSYS MR is available as a standalone unit or as a PC-controlled unit using Windows™ Revelation QuickLINK software.
New
448-026
■
Suitable for 96-well microplates
■
Choice of stand-alone or PC control
■
Measurement time, less than 10 seconds for a 96-well microplate (single wavelength)
■
Flexible on-board software
■
Simple yet robust construction
■
RS232 port for external control through QuickLINK software and data export
■
On-board self diagnosis
■
Small footprint
■
6 position filter wheel
The stand-alone OPSYS MR reader is supplied with absorbance filters: 405nm, 450nm, 490nm and
630nm, lamp, cables and operating manual. The PC-controlled OPSYS MR reader is supplied as above,
but with QuickLINK software for PC control.
Specifications
Optical range
Wavelength range
Dynamic range
Measuring time
Single wavelength
Double wavelength
Linearity
Precision
Accuracy
Interfaces
Printer
Serial
Dimensions (wxdxh), mm
Electrical requirements
Weight, kg
Cat. No.
0 to 3.500 OD
405 to 690nm
0.0 to 3.000 OD
<10 seconds
<20 seconds dual wavelength
±1% up to 2.500 OD
±1.5% over 2.500 OD
±0.005 OD below 0.500 OD
<1%CV 0.600 OD to 2.000 OD
<1.5%CV 2.100 OD to 3.000 OD
±0.01 OD or 2.5%
Parallel Centronics
Bi-directional RS232C
340x350x120
100-120V, 220-240V
7.3
Description
448-265 OPSYS MR stand-alone, automatic microplate reader
448-271 OPSYS MR automatic microplate reader for PC control supplied with
Revelation QuickLINK software
Accessories
448-286 Revelation QuickLINK software for OPSYS MR stand-alone reader.
Enables PC control
448-287 Spare & additional filters for OPSYS MR (405nm to 690nm)*
448-288 Spare lamp
Price
POA
POA
POA
POA
POA
* Please specify which filter type you require when ordering.
For other options and accessories, please enquire on 01342 826836.
OPSYS MR Verification Plate
The OPSYS MR verification plate is used to verify correct measurement performance of your OPSYS MR
absorbance reader. The verification plate performs alignment, accuracy, linearity and precision tests at
several wavelengths. The verification plate is supplied with absorbance calibration data traceable to NIST
primary standards and NAMAS (through NPL)
■
Neutral density filters and precision machines alignment holes to confirm performance to specifications
■
Optical channel matching (comparing all optical channels for consistency)
■
Linearity (measurement of deviation of the optical density versus concentration)
■
Calibration (comparing readings with pre-determined factory values)
■
GMP and GLP compliance
Cat. No.
Description
448-026 OPSYS MR verification plate
626
Take a look at our latest products on www.ecomcat.co.uk
Price
POA
Microplate Equipment
Readers
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤
01342 826771 Website➤
www.jencons.co.uk
Dynex Technologies, MRX Microplate Readers
448-127
New
448-131
New
Model MRX11 features a standard floppy disc drive (FFD) and endpoint software, whilst the MRXRevelation
is a faster and more powerful instrument possessing a hard disc drive and Revelation software. In
addition, the MRXRevelation features a keyboard, monitor and mouse and temperature control option.
MRX11
The MRX11 microplate reader combines excellent performance and data export capability, in a compact,
economical package. The stand-alone MRX11 can save and recall up to 100 assays, 20 standard curves
and 100 96-well plate data files from quantitative or qualitative analyses. This unit’s standard output is
an optional attached printer and the reader can be upgraded to run via a PC using Revelation software
control. Data files from the MRX11 can be exported on a 3" diskette in an ASCII format that is easily read
by Microsoft Excel™.
MRXRevelation
The MRXRevelation microplate reader extends the MRX11 capability. The MRXRevelation unit incorporates
PC architecture to conserve bench space. It also features:
■
Keyboard, monitor, mouse and external CD-ROM drive allowing the user to work within a
Windows™ environment using the Revelation software package without the need for a PC
■
Endpoint, kinetic and tissue culture/agglutination software capability included with Revelation software
■
Temperature control option
The MRX11 reader is supplied with absorbance filters: 405, 450, 490 and 630nm, endpoint software,
floppy disc drive, lamp and operating manual.
The MRXRevelation reader is supplied with absorbance filters: 405, 450, 490, 530, 570 and 630nm,
Revelation software, keyboard, mouse, monitor, external CD-ROM drive and operating manual.
Specifications
Light source
Read cycle time
75W tungsten halogen lamp
Single wavelength <4 seconds
Double wavelength <6 seconds
Wavelength range 405 to 850nm
Dynamic range
-0.100 to +4.000 OD
Linearity
0.000 to 2.000 OD ±1.0 %,
2.001 to 3.500 OD ±1.5%
Precision
0.000 to 2.000 OD 0.2%CV or 0.005 OD whichever is greater
2.001 to 3.000 OD 0.6CV
3.001 to 3.500 OD 1.0%CV
Accuracy
0.000 to 3.500 OD ±2.5% or 0.005 OD whichever is greater
Linearity
±1% up to 2.500 OD
±1.5% over 2.500 OD
Wavelength range 340 to 400nm
Dynamic range
-0.100 to +3.000 OD
Linearity
0.000 to 2.500 OD ±2%
Precision
0.000 to 2.000 OD 0.6%CV or 0.005 OD whichever is greater
2.001 to 2.500 OD 1%CV
Interfaces
Printer
Parallel Centronics, compatible with 850 Printers
Serial
Bi-directional RS232C with user definable protocol
Temperature control option for MRXRevelation reader
Range
Ambient to 63°C
Stability
<±0.5°C
Accuracy
±1.0°C
Dimensions (dxwxh), mm
390x360x220
Electrical requirements
100 to 120V or 220 to 240V 50/60Hz
Weight, kg
12.5*
* Not including external equipment (mouse, monitor, keyboard etc)
Cat. No.
Description
Price
448-127 MRX11 microplate reader supplied with 4 filters, endpoint software,
FDD, lamp and operating manual
448-131 MRXRevelation microplate reader supplied with 6 filters, Revelation software,
keyboard, mouse, monitor, external CD-ROM drive, lamp and operating manual
448-132 MRXRevelation microplate reader with temperature control option supplied
with 6 filters, Revelation software, keyboard, mouse, monitor, external
CD-ROM drive, lamp and operating manual
POA
POA
POA
For accessories, see page 628.
Take a look at our latest products on www.ecomcat.co.uk
627
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤
01342 826771 Website➤
www.jencons.co.uk
New
448-142
Readers
Dynex Technologies, MRX Microplate Readers, continued…
Accessories
Cat. No.
Description
448-135
448-199
448-137
448-138
448-139
Network LAN card for MRXRevelation reader
MRXRevelation software for Windows™ (PC version) for both models
Spare & additional filters (340nm to 850nm)*
Spare lamp
Spare UV lamp
Price
POA
POA
POA
POA
POA
* Please specify which filter type you require when ordering.
For other options and accessories, please enquire on 01342 826836.
MRX Verification Plate
The MRX verification plate allows independent validation of your microplate reader. It was developed
by Dynex to meet the needs of today’s quality management and provides documentation to help meet
regulatory requirements. The plate consists of NIST (NBS) traceable neutral density glass filters and a
series of alignment holes. The software produces data on the following:
■
Plate alignment
■
Optical channel matching (comparing all optical channels for consistency)
■
Linearity (measurement of deviation of the optical density versus concentration)
■
Calibration (comparing readings with pre-determined factory values)
■
Filter installation test
■
Long term drift
Cat. No.
Description
Price
448-142 MRX verification test plate and software for visible range
New
448-025
POA
Spectra MR Scanning Microplate Reader
The Spectra MR scanning microplate spectrophotometer affords the most stable and accurate
absorbance detection in a convenient compact instrument. Spectra MR accepts all microplate formats
from 6 to 384-wells. Multiple photometric readings per well can be obtained at wavelengths from
200nm to 1,000nm in 1nm increments with the scanning monochromator.
The Spectra MR is simple to use (supplied with Revelation software) and offers flexibility, performance,
precision and accuracy. A PC is required but not supplied.
The special Spectra MR verification plate containing NIST-traceable standards and IQ/OQ/PQ procedures
are additional tools to ensure proper documentation and operation.
■
Accurate absorbance measurements at high optical resolution of 2nm, important for discriminating the 260nm narrow peaks of DNA
■
Temperature control between ambient +3°C and 45°C
■
Zero drift and excellent baseline performance
■
Quantitative endpoint and enzyme kinetics
■
Data can be directly exported to Microsoft Excel™ or saved in text format
Determination of concentrations of nucleic acids at A260, A260-A320 and A260/A280
■
■
Path length correction function to compare Spectra MR data to data from any other
spectrophotometer
■
Scanning ability to establish absorbance spectrum and identify peak absorbance
Spectra MR applications
628
■
UV/Visible absorbance & photometry
■
Spectrum scanning
■
Nucleic acid analysis (RNA concentration (A260), ssDNA concentration (A260), dsDNA concentration (A260), DNA purity assessment (A260/A280))
■
■
Enzyme kinetics (e.g. Vmax and Km)
Cell proliferation
■
Cytotoxicity
■
Protein analysis (Biuret protein determination, Bradford protein determination, BCA protein determination, Endpoint calibration curve protein assays)
■
Colorimetric assays (ELISA / EIA, Immunoassays, Kinetic ELISA / EIA, ß-galactosidase activity)
■
NAD(P)H-based assays (Nitric oxide determination)
Take a look at our latest products on www.ecomcat.co.uk
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤
01342 826771 Website➤
www.jencons.co.uk
Readers
Dynex Technologies, Spectra MR Scanning Microplate Reader,
continued…
448-024
New
The Spectra reader is supplied with Revelation software, cables and operating manual.
Specification
Light source
Wavelength range
Wavelength bandwidth
Wavelength accuracy
Wavelength resolution
Photometric linearity
Photometric range
Photometric resolution
Photometric accuracy
Photometric precision (96 well plate)
Stray light
Read time
Scanning speed
Temperature range
Temperature control accuracy
Shaking
Plate types
Reading methods
Interface
Computer requirements
Dimensions (dxwxh), mm
Electrical requirements
Weight, kg
Cat. No.
Xenon flash lamp
200–1,000nm Tunable Monochromator
2nm ±0.3nm
±1nm
1nm
±2% from 0.0 A to 3.0 A
0.0 A to 4.0 A
±0.001 A
±0.005 A or <1.0% from 0.0 to 2.0 A
2.0% from 2.0 A to 3.0 A
<0.005 A SD or <1% CV (whichever is greater)
between 0.0 and 2.0 A; <2.0% CV between 2.0 and 3.0 A
< 0.03% @ 230nm
96 wells < 20 seconds, typical (single wavelength)
384 wells <60 seconds, typical (single wavelength)
>90nm /min
Ambient +3°C to 45°C
±1.0°C at 37°C (average of 96 wells)
±0.5°C well-well variation at 37°C
Linear, 3 user selectable modes
6, 12, 24, 48, 96, 384 well
Endpoint, kinetic, scanning
USB
USB port, Windows® 2000 or XP with 500MHz
64MB RAM, 4 GB hard drive
443x401x224
100-240V
17.7
Description
Price
448-025 Spectra MR microplate reader supplied with Revelation software, cables
and operating manual
POA
Accessories
Cat. No.
Description
Price
448-023 Validation procedures (IQ,OQ,PQ)
POA
For other options and accessories, please enquire on 01342 826836.
Spectra Verification Plate
The Spectra MR verification plate features:
■
Verification process is fully automated within Revelation software options to eliminate human error
■
The process tests if the following meet specifications; Linearity (absorbance accuracy), Precision
(reproducibility) and Wavelength accuracy in both visible and UV ranges
■
Spectral response is verified to ensure the complete spectral range is being detected as well as
stray light rejection
■
NIST traceability is provided for each filter in the verification plate along with a protective
storage case
■
Re-calibration service for annual recalibration
Cat. No.
Description
Price
448-024 Spectra MR verification plate
POA
For information on UV microplates, please contact our Technical Office on 01342 826836.
Take a look at our latest products on www.ecomcat.co.uk
629
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤
01342 826771 Website➤
www.jencons.co.uk
New
448-144
Readers
Dynex Technologies, TRIAD Series Multimode Microplate Readers
The new innovative TRIAD and TRIAD LT multimode microplate readers are suitable for fluorescence,
luminescence and absorbance based assays. They provide excellent value and flexibility for a variety of
application needs.
The TRIAD and TRIAD LT include multimode detection Control software to enable simple instrument
control, data transfer and assay protocol development. With an Outlook™ style and wizard-based interface,
users can easily define protocols. Data can be automatically exported to Excel™, saved to file and printed.
The optional TRIAD Concert software is an analysis software package which extends data manipulation
capability (curve fitting e.t.c.) and includes Control software. The TRIAD Signet software, also available
as an accessory, includes all of the features of Concert software plus, 21 CFR Part 11 compliance.
TRIAD LT is designed for absorbance (VIS), fluorescence intensity (top read) and glow luminescence, and
is supplied with excitation filters: 360nm and 485nm, emission filters: 465nm and 535nm, absorbance
filters: 405nm, 450nm, 492nm and 620nm and multimode detection control software.
The TRIAD is designed for absorbance (UV/VIS), fluorescence intensity (top and bottom read), glow luminescence, fluorescence polarization (FP) and time resolved fluorescence (TRF), and is supplied with
excitation filters: 535nm, 485nm, 485nm (FP) and 370nm (TRF), emission filters: 595nm, 535nm, 535nm
(FP) and 625nm (TRF), absorbance filters: 260nm, 340nm, 405nm, 450nm, 595nm and 620nm and
multimode detection control software.
Specifications
Model
Plate formats
Shaking
Temperature control, °C
Dimensions (wxhxl), mm
Minimum computer system
Fluorescence Intensity - Top Read
Wavelength range, nm
Detection limit - 96 well black plate
Detection limit - 384 well black plate
Integration time/well, ms
Fluorescence Intensity - Bottom Read
Wavelength range, nm
Detection Limit - 96 well black plate
Detection Limit - 384 well black plate
Integration time/well, ms
Time-Resolved Fluorescence
Wavelength range, nm
Detection limit - 96 well white plate
Detection limit - 384 well white plate
Fluorescence Polarization
Wavelength range, nm
Detection limit - 96 well black plate
Detection limit - 384 well black plate
Integration time/well, ms
Luminescence (Glow)
Wavelength range, nm
Detection limit - 96 well white plate
Integration time/well, ms
Read time for all of the above
Linear dynamic range for all of the above
Absorbance
Wavelength range, nm
Resolution, mOD
Indication range, OD
Accuracy
Measurement modes
Cat. No.
TRIAD
TRIAD LT
6 to 384 well
96 to 384 well
Linear, Orbital, Squared (3 speeds)
Linear, Orbital, Squared (3 speeds)
Ambient +3 to 45
––––
390x240x580
390x240x580
Pentium® II 300MHz, 256MB RAM, 150MB free space, CD-ROM 4x,
serial port, Windows NT® (SP 6a)/Windows® 2000/Windows® XP(both models)
230 Excitation, 750 Emission
1.5fmol fluorescein (1 sec integration)
1.5fmol fluorescein (400ms integration)
10 to 10,000
340 Excitation, 650 Emission
10fmol fluorescein (1 sec integration)
5fmol fluorescein (400ms integration)
10 to 10,000
300 Excitation, 650 Emission
50fmol fluorescein (1 sec integration)
25fmol fluorescein (400 ms integration)
10 to 10,000
––––
––––
––––
––––
340 Excitation, 750 Emission
50 amol Europium (1 sec integration)
30 amol Europium (400ms integration)
––––
––––
––––
300 Excitation, 750 Emission
5mP at 10nM fluorescein (1 sec integration)
5mP at 10nM fluorescein (400 ms integration)
10 to 10,000
––––
––––
––––
––––
400 to 750
2fmol ATP
10 to 10,000
18 sec/96 well
5 decades
400 to 650
2fmol ATP
10 to 10,000
18 sec/96 well
5 decades
230 to 650
0.1 from 0-3.5 OD
0 to 3.5
<±1% and ±10mOD at 2.0OD (405nm)
Single, dual, multiple wavelengths; scan; kinetic
340 to 650
0.1 from 0-3.5 OD
0 to 3.5
<±1% and ±10mOD at 2.0OD (405nm)
Single, dual, multiple wavelengths; scan; kinetic
Description
448-144 TRIAD multimode microplate reader
448-145 TRIAD LT multimode microplate reader
630
Price
Options
POA
POA
Cat. No.
Description
448-146 Concert analysis software
448-147 Signet analysis software
Take a look at our latest products on www.ecomcat.co.uk
Price
POA
POA
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤
01342 826771 Website➤
www.jencons.co.uk
Readers
Anthos, 2010 and 2020 Microplate Readers
700-254
The 2010 single-channel microplate reader is designed to be controlled via a PC. ADAP Basic software
(supplied) is used to control the instrument and perform the desired measurement and evaluation. Suitable
for routine laboratories, blood banks, research laboratories, PC-integrated systems and many others.
Qualitative and quantitative functions for endpoint assays require ADAP Plus or ADAP Expert software.
The 2020 single-channel microplate reader has sophisticated on-board software and a large graphics
colour display. Built on the technical basis of the 2010 it forms a convenient stand-alone system, offering
powerful, yet easy-to-use features. The 2020 covers the wide range of colorimetric ELISA tests and other
applications in diagnostics, research, environmental analysis and food testing.
Measurement modes
Single- and dual-wavelength reading, 30 seconds reading time per plate (60 seconds - dual wavelength),
calibration prior to each measurement. Kinetic measurement, up to 100 reading cycles with a minimum
interval time of 40 seconds. Fast measurement mode with data output in OD values on display and printer.
700-253
Flexible plate layout functions
Selectable blank validity, auto replicate mode and filling direction. Up to 4 controls and 12 standards
can be positioned in the plate layout.
Evaluation possibilities
A range of quantitative and qualitative evaluation methods can be applied to measurement or relational
values plus a number of kinetic data reduction options. Results can be viewed on the screen and outliers
rejected prior to printout.
Data storage
2010 - In basic configuration 30 to 50 tests (flexible memory management) and 10 plates (measured
results) may be stored for later evaluation. With an optional memory card, individual sets of tests and
plate data can be stored and reloaded. Stored tests and results may be password protected.
2020 - 1.5 MB of onboard memory for tests and results with flexible memory management. Floppy drive (3.5”)
for saving and transmitting test files and evaluated data files and for easy updates of the on-board software.
Interfacing
2010 - Serial interface for remote control of basic measurement functions, instrument status and setup
by external PC. Transmission of measured results, instrument status, etc.
2020 - Display: 25x42 characters colour graphics (640x480 pixels), keyboard with function keys, parallel
printer interface for inkjet, laser and matrix printers and serial interface for remote control of all
measurement functions. ADAP Basic supplied with the 2020 enables the transfer of tests and results
between the reader and the PC as well as convenient update of the instrument software.
Both models are supplied with 4 filters (405, 450, 492, 620nm), dust cover, user manual, spare fuses,
power and serial cables and ADAP Basic software.
Specifications
Photometric method
Light source
Photodetector
Wavelength range, nm
Resolution, OD
Measurement range
Accuracy
Linearity
Reproductibility
Reading speed, per plate
Filters
Power supply
Data connections
Display and keyboard (2020)
Printer, both models
Dimensions (wxhxl), mm
Weight, kg
Single channel, well-centre-triggered reading with post-sample filtering, eliminating the influence of ambient light.
Controlled tungsten halogen lamp
Single silicon photodiode
400–750
0.001
0.000–3.300
2% OD @ 1 OD, 492nm
≤±0.75% and ±0.005 OD from 0.1 OD to 2.5 OD
≤±0.3% at 1 OD
Single wavelength: ~ 30 sec./ Dual wavelength: ~ 60sec.
Dielectrical interference filters. Filter-wheel can hold up to 8 filters. Four filters supplied as standard: 405, 450, 492, 620nm
Consumption: 50 VA, 90–260 Volt, frequency range: 47–63Hz (autosensing)
Serial interface: 9-pin / Parallel printer interface: 25-pin
25x42 characters colour graphics (640x480 pixel) Keyboard with numeric keypad, cursors and function keys
Please contact our Technical Office on 01342 826836
2010: 326x173x435/ 2020: 344x255x430
2010: 6.6/2020: 10.0
Cat. No.
Description
700-254
700-253
Options
700-271
700-269
2010 Reader, measurement module for PC control with ADAP Basic PC software
2020 Stand-alone reader with on-board software, floppy drive and ADAP Basic PC software
Price
POA
POA
ADAP Plus PC software (including ADAP Basic)
ADAP Expert PC software (including ADAP Plus)
POA
POA
For more information on optional software please see page 632 or contact our Technical Office on 01342 826836.
Take a look at our latest products on www.ecomcat.co.uk
631
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
Order by fax➤
01342 826771 Website➤
www.jencons.co.uk
700-267
Readers
Anthos, Zenyth 340 Microplate Readers
The Anthos Zenyth 340 range are universal microplate readers for all kinds of colorimetric assays. The instruments have fast and flexible scanning optics, a wide measuring
range and provide multiple measurement modes for mono- and bi-chromatic endpoint
readings, kinetic and position scanning readings. They are compatible with plates from
6 to 384 wells. All models are supplied with ADAP Basic software.
The Zenyth 340 is available in four configurations:
Zenyth 340S
Stand-alone version with proven on-board software and flexible interfacing.
Zenyth 340ST
As Zenyth 3405 but with temperature control.
700-266
The two stand-alone models offer comprehensive evaluation function via a built in
Windows® CE computer. Connections are available for a full keyboard, mouse, VGA
and USB floppy drive. The instruments can be fully integrated in computer networks
(LAN) for bi-directional data exchange or even connected to the internet.
Zenyth 340R
PC-controlled version, with serial interface.
Zenyth 340RT
As Zenyth 340R but with temperature control temperature control.
The PC-controlled versions are supplied with a data acquisition package (ADAP Basic
software) which provides all functions for instrument control and data acquisition,
plus data transfer to other data analysis packages.
Key features
■
Wavelength range 340–750nm
■
Fast measurement:
10 sec. for 96-wells
18 sec. for 384-wells
■
Excellent optical specifications
(0.1mOD resolution)
■
Multiple plate formats: from 6- to
384-well plates
■
Different measurement modes for a
broad range of assays: single and
dual wavelength for standard ELISA
applications, kinetic mode for
kinetic and enzyme activity studies,
linear scan for agglutination and
coagulation assays, XY-scan: 7x7
data points in 96-well; 32x32 data
points in 6-well plates
Main applications
■
ELISA
■
■
Cell-based assays (apoptosis, cell
proliferation, cytotoxicity)
Colorimetric protein quantitation
(Bradford, Lowry, BCA assays)
■
■
Reporter assays (beta galactosidasebased reporter studies)
NAD(P)H-based activity studies
(enzyme kinetics)
Software packages
■
ADAP Basic (standard software supplied with all Zenyth models) includes:
administration, device control, data storage, kinetic data reduction, position
scanning, shaking, data transfer, incubation (Zenyth 340ST, Zenyth 340RT only).
Also available:
■
632
ADAP Plus includes:
user log in, plate layout, controls,
standards, replicates, formula/
variables, qualitative and quantitative evaluation, standard curve,
replicate elimination, validation
Take a look at our latest products on www.ecomcat.co.uk
■
ADAP Expert includes:
(in addition to ADAP Plus)
kinetic evaluation, 3-D scan display,
intra-plate multi-assay, sample
identification
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
Readers
Anthos, Zenyth 340 continued…
Touchscreen
Specification
Photometric method
Light source
Photodetector
Wavelength range, nm
Resolution, mOD
Absorbancy range, OD
Accuracy
Linearity
Repeatability
Reading speed
Standard filters
Power supply
Shaking speeds
Temperature control
Operating system
Data connections
Standard software
Printer
Dimensions (wxhxl), mm
Weight, kg
Single channel, transmission photometer
Controlled tungsten halogen lamp
Single silicon photodiode
340–750
0.1
0.000–4.00
<±1.5% at 1 OD
<±0.5% and ±0.005 OD from 0.1 OD to 1.5 OD
<±0.75% from 1.5 OD to 3.0 OD (400–750nm)
<±0.7% and ±0.005 OD from 0.1 OD to 2.0 OD (340–399nm)
<±0.3% at 1 OD
<±0.5% at 2 OD
96-well - 10sec. (single wavelength)
384-well - 18sec. (single wavelength)
405, 450, 620nm
90–130 and 180–250V, (autosensing), frequency range: 47–63Hz
3
From 4°C above ambient up to 45°C in 1°C steps (340ST and 340RT only)
Windows CE 3.0 (340S and ST)
All models: Serial interface: 9-pin, baudrate 9600/19200/38400 baud
340S and 340ST only : Parallel printer interface: 25-pin,
with PCL support (HP), USBx2, LAN/Ethernet, VGA, keyboard, mouse
ADAP Basic
Contact our Technical Office on 01342 826836
468x251x408
15
All Zenyth models are supplied with ADAP Basic software, power cable, serial cable, 3 standard filters (405, 450,
620nm), dust cover, user manual, spare fuses . Models 340S and 340ST are also supplied with an adaptor for
keyboard/mouse.
Cat. No.
Description
Price
700-267 Zenyth 340S stand-alone reader with on-board software and
ADAP Basic PC software
700-265 Zenyth 340ST stand-alone reader with on-board software,
ADAP Basic PC software and temperature control
700-266 Zenyth 340R reader for PC control with ADAP Basic PC software
700-268 Zenyth 340RT reader for PC control with ADAP Basic PC software
and temperature control
POA
POA
POA
POA
Options
Cat. No.
Description
Price
700-271 ADAP Plus PC software (includes ADAP Basic)
700-269 ADAP Expert PC software (includes ADAP Plus)
POA
POA
Anthos, Zenyth 200 Monochromator Microplate Reader
Zenyth 200
The Zenyth 200 offers cuvette and microplate scanning spectrophotometry in one instrument for measurements in the low UV range as well as the visible range. A high precision monochromator separates
light of the desired wavelength into either wells of microplates or cuvettes. The microplate chamber can
be temperature controlled up to 45°C. Endpoint, multichromatic, kinetic, spectral scanning and X-Y
position scanning modes offer complete assay flexibility.
Pre-programmed assays include:
■
ssDNA, dsDNA and RNA concentration (A260)
■
DNA purity check (A260/A280)
■
Oligo short/long concentration and melting point
There are two Zenyth 200 models:
200RT, a PC controlled version with temperature control and 200ST, a stand-alone version with onboard
software and temperature control.
For full details on the Zenyth 200, please contact our Technical Office on 01342 826836.
Take a look at our latest products on www.ecomcat.co.uk
633
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
448-350
Readers
Tecan, Sunrise Microplate Reader
With an innovative range of options, this versatile microplate absorbance reader provides all of the
features needed for numerous applications which are required in diagnostic and research laboratories
with high throughput.
As standard, the reader is controlled using a PC and is supplied with Excel™-based XFluor software™.
XFluor provides instrument control and data acquisition. For more advanced data reduction and report
generation, Magellan software is available as an optional extra. Through a touchscreen option, the
Sunrise can operate without a PC, allowing computer-independent data processing and saving space.
Options such as a touchscreen combined with a Windows® CE based on-board software, tuneable
wavelength filter, temperature control and a bar-code reader can be added to the basic Sunrise instrument
(please specify at time of ordering).
448-350 with touchscreen option
Applications: absorbance measurements in microplate-based assays, ELISA, agglutination assays, kinetic assays.
■
Microprocessor-controlled microplate reader for absorbance measurement of 96-well microplates
■
Multiple options: touchscreen with Windows® CE based on-board software, wavelength
selection or scanning in 1nm steps via a tuneable wavelength filter, precise temperature control
up to 42°C, flexible bar-code reader, quality validation plate, Magellan data-analysis software for
operation from a PC
■
12 measurement channels, 1 reference channel (reads 12 channels at a time)
■
Fast measurement time, 6 seconds for a 96-well microplate (single wavelength)
■
Measurement with high precision and high resolution
■
Can be integrated into robotic systems
■
Compact and space-saving design
■
3 year warranty
The Sunrise reader is supplied with XFluor software for PC control (compatible with Excel 200 or Excel
XP), absorbance filters: 405, 450, 492 and 620nm and operating manual.
Touchscreen
Specification
Optical system
Wavelength range
Standard model
Measuring range
12 measuring channels and 1 reference channel
340 to 750nm, Fixed filter slide with 4 fixed filters
340 to 399nm: 0 to 3.0 OD
400 to 750nm: 0 to 4.0 OD
Measuring time including check program and plate transport
Single wavelength
6 seconds
Double wavelength
8 seconds
Kinetics measurements
Every 5 seconds
Accuracy
Standard filter slide
0.0 to 2.0 OD/492nm: better than ±1.0% and ±0.010 OD
2.0 to 3.0 OD/492nm: better than ±1.5% and ±0.010 OD
Linearity
Standard filter slide
340 to 399nm: 0.0 to 2.0 OD better than ±2.0%
400 to 750nm: 0.0 to 2.0 OD better than ±1.0%
2.0 to 3.0 OD better than ±1.5%
Precision
Standard filter slide
0.0 to 2.0 OD/492 nm: better than ±0.5% and ±0.005 OD
2.0 to 3.0 OD/492 nm: better than ±1.0% and ±0.005 OD
Resolution
0.001 OD
Linear shaker function
Linear in 4 selectable velocities
Interfaces
Serial interface (RS232C, 300–38.400 Baud), parallel Centronics interface
for printer (only active in combination with touchscreen option)
Power supply
Autosensing, 100–120/220–240V, ±10% 50/60Hz
Dimensions (wxdxh), mm
335x320x170
Weight, kg
6 (6.8 with touchscreen)
Bar-code reader
Optional
Roboter integration
Optional
Specialities
Touchscreen, modular design
Cat. No.
Description
Price
448-350 Sunrise microplate reader
Options
448-366 Touchscreen for on-board reader control
448-351 Temperature control
POA
POA
POA
Cat. No. Description
448-367 Bar-code reader
448-368 Tuneable wavelength filter*
448-369 Magellan software (2 user licence)**
* When fitted, this replaces the standard filter slide. **5 user licences are also available.
For extra filters and other options and accessories, please enquire on 01342 826836.
634
Take a look at our latest products on www.ecomcat.co.uk
Price
POA
POA
POA
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
Readers
Jencons, Optica Microplate
Reader
New
448-048
The Optica microplate reader is an 8 channel
photometer for 96-well microplates. It can be
operated using either the onboard software via
the 17 key membrane and back lit LCD or through
a PC (software required, but not supplied). Results
can be printed utilising a dot-matrix printer
connected directly to the Optica or to any printer
that is connected to the PC.
The Optica software lets you run up to 10
different assays per session with plates containing
up to 12 standards and 12 controls. Assays can
be configured and saved onto the hard disc ready
for future use. The software also enables the
processing of a qualitative or a quantitative assay
with qualitative interpretation which is visualised
in a graph. Individual data cards can be generated
for each patient and all test results can be saved
or printed out.
■
Two optical filters built in as standard
■
Optional addition of two more filters
■
Full onboard control or control via PC
(accessory software required)
■
Accommodates all 96-well plate types
■
8 independent channels
■
Quiet and reliable
■
Minimal footprint
Specification
Reading principle
Light source
Detectors
Measuring range
Measuring times
Accuracy
Result curves
Result calculation modes
Plate shaking
Interfaces
Power supply
Dimensions (wxdxh), mm
Weight, kg
Cat. No.
448-048
8 channel mono or biochromatic reading
8 independent tungsten bulbs
8 silicon photodiodes
450nm to 630nm with filters supplied
405nm to 750nm with optional filters
16 seconds – full plate monochromatic
32 seconds – full plate biochromatic
±1% from 0.000 to 1.500 OD
±2% from 1.500 to 3.000 OD
Direct plotting point to point, linear regression
and 4 parameter (log-logit)
OD, direct or calculated cut-off, single calibrator,
programmable curves from 2 to 12 point
Timed linear shaking
User interface: 2x20 character LCD and
17 key membrane switch panel
Printer interface: Printer port for a dot-matrix printer
PC interface: RS232 to PC using Windows™ 98/XP/ NT/2K
110/230V AC, 50-60Hz
200x577x240
8.2
Description
New
Price
448-048 Optica microplate reader with two filters (450-630nm)
448-049 PC software supplied with RS232 cable.
Suitable for PC using Windows™ 98/XP/NT/2K
POA
POA
Please specify power supply when ordering, so that your reader is supplied with the correct mains lead. For details on
other filters and spare filters please contact our Technical Office on 01342 826836.
Take a look at our latest products on www.ecomcat.co.uk
635
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
New
Readers
Dynex Technologies, MLX Microplate
Luminometers
448-153
The MLX range of luminometers marks a breakthrough in microplate
luminometry, combining revolutionary hardware and powerful software.
With its modular subassembly and PC components, the MLX delivers
state-of-the-art performance, precision, sensitivity, flexibility and reliability.
■
Eight decades dynamic range – permits detection of high and low
intensity reactions
■
Automatic gain change – permits detection of varying intensity on
the same plate
■
Specially selected PMT – offers excellent linearity
■
Low cross-talk – less than 2.5 parts in 100,000 results in high signal-to-noise values, also offering low background values, thus
increasing sensitivity
■
Fast reading intervals – 10 milliseconds is the fastest available
■
Highly reproducible – precision of better than 2%
■
Advanced data reduction software – Revelation Intuitive software
offers the ability to measure glow, flash and kinetic glow reactions.
Analysis of QC, threshold, ratio and quantitative analyses-choosing
from 12 different curve fits
■
Flexible configuration – with up to 3 dispensers, the system can perform multi-reagent flash reactions
■
Temperature control included as standard
■
CE marked
The MLX luminometer systems are supplied with keyboard, monitor,
mouse, Revelation software and cables.
Specifications
Reading time
Detection limits
Operating modes
Dynamic range
Linearity
Precision
Cross-talk
Temperature control
Shaking
Detector
Dispensers
Dimensions (wxdxh), mm
Weight, kg
Cat. No.
<30sec./plate 96-well format
Better than 10 fmol alkaline phosphatase or 1 attamol of recombinant
aequorin and 5 zeptomol of firefly luciferase
Glow endpoint, glow kinetic, flash, dual-flash
0.0008 to 10,000 RLU
R > 0.999 from 0.001CV to 9900 RLU
Better than 1% from 0.3 to 9900 RLU
< 2.5 x 10-5 from 0.0001 to 999.99 RLU
Ambient +3°C to 45°C, uniformity ±1°C
Orbital with 3 speeds
Photomultiplier tube
15 to 250µl, 5µl increments (500µl syringes)
500x450x250
23
Description
448-152 MLX Microplate luminometer system supplied with keyboard, monitor,
mouse, Revelation software and cables
448-153 MLX Microplate luminometer system supplied with keyboard, monitor,
mouse, 1 dispenser, Revelation software and cables
448-154 MLX Microplate luminometer system supplied with keyboard, monitor,
mouse, 2 dispensers, Revelation software and cables
448-155 MLX Microplate luminometer system supplied with keyboard, monitor,
mouse, 3 dispensers, Revelation software and cables
Price
POA
POA
POA
POA
For options and accessories, please contact our Technical Office on 01342 826836.
MLX Reference Plate
The luminometer reference plate is designed for monitoring the precision and accuracy of the relative
light unit (RLU) measurement for most microplate luminometers. It consists of a precision- controlled
light source, which is filtered to produce a narrow bandwidth of light, thus ensuring reproducibility. The
plate is powered by two 1.5v AAA alkaline batteries.
Cat. No.
Description
448-156 MLX luminometer reference plate
636
Take a look at our latest products on www.ecomcat.co.uk
Price
POA
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
Readers
Anthos, Lucy 2 and Lucy 3 Luminometers
700-262
Anthos Lucy 2 and Lucy 3 are combined luminometers and photometers for 96-well
microplates. The photon counting measurement system sets new landmarks for the
sensitivity and the dynamic range of microplate assays. Lucy 2 is designed for use with
a PC and is suitable for all tasks in research and routine applications.
Lucy 3 is a stand-alone model with on-board software. It combines highly sensitive
luminescence measurements with the easy operation and functionality of a conventional ELISA Reader. The compact, economical analyser with two dispensers offers
unrivalled flexibility when performing flash and glow luminescent measurements.
With its comprehensive evaluation software it is universally suited for luminometric
ELISA, colorimetric ELISA, and all other luminescence applications.
Lucy 3 is easily operated using the combined function key and pull down menu
structure of the software. The measurement process can be monitored on a large
colour graphics display. 5.5 MB memory is available for test and result storage.
Dispensers
Triggering reagents or internal quantitation standards may be injected into two well
positions next to the detector. The high precision dispensers are software controlled
for delivery of volumes in steps of 50µl. The tubing is metal free and easily exchanged
700-263
Photometer
Both models provide full photometric function using an additional light source and a
filter wheel below the detector.
Measurement modes
Measurement and dispensing steps are combined to define all relevant measurement
modes for single point and kinetic applications in luminescence and photometry.
Without dispensing and at 0.1 seconds integration time per well, a complete plate is
measured in less than 60 seconds. The integration time may be set in the range of
1/100 to 10 seconds in steps of 1/1000 of a second.
The following measurement modes are available when programming a test.
SPF (mono- and bi-chromatic single point photometric measurements), SPL (single
point luminometric measurements with predispensing), DSPL (double single point
luminometric measurements - best suited for dual luciferase assays), TSPL (timed single
point luminometric measurements: dispense plate first and then read keeping
intervals), FKL (fast kinetic luminometric measurement).
For quick measurements (without the need of pre-programming a test), SPF, SPL and FKL
are available. In addition, Lucy 3 processing steps like shaking and incubating may be
combined with the measurement modes.
Software and interfaces
Lucy 2 - All instrument functions (including the optional lid opener for robotic applications) must be remotely controlled from a PC and measured data will be subsequently
transmitted to the computer for evaluation. Windows® based ADAP software allows
flexible configuration and performance of the required measurement protocols .
Lucy 2 has an RS232 serial connection for PC control.
Lucy 3 - The sophisticated on-board software allows qualitative, quantitative and semiquantitative evaluation as well as kinetic data reduction (peak value or timing, integral,
average slope, maximum slope), replicate elimination, transformation calculation and
control and test validation. Measurement modes and evaluation methods can be used
in any conceivable combination.
Measurement and evaluation parameters are stored together with results, so reevaluation is possible even if the original test protocol has been discarded.
Lucy 3 - Display: 25x42 characters colour graphics (640x480 pixels), keyboard with
function keys, parallel printer interface for inkjet, laser and matrix printers, serial
interface for remote control of all measurement functions.
Take a look at our latest products on www.ecomcat.co.uk
637
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
700-262
Readers
Anthos, Lucy 2 and Lucy 3 Luminometers, continued…
Applications
Lucy 2 and Lucy 3 are suited for all applications of bio- and chemiluminescence using microplates,
including:
700-263
■
Firefly luciferase (ATP-measurements, biomass determination)
■
Bacterial luciferase (reporter gene detection, toxicity assays)
■
Enhanced luminol (cellular luminescence, water testing)
■
Phagocyte chemiluminescence
■
Chemiluminescent enzyme substrates (immuno assays, DNA assays)
Lucy 2 is supplied with 2 dispensers, serial connection cable, ADAP Basic control and evaluation software,
4 photometric filters (405, 450, 492, 620mm), 1 luminometric highpass filter (570mm), dust cover, user
manual and spare fuses.
Lucy 3 is supplied with 2 dispensers, serial connection cable, ADAP Basic control and evaluation software,
4 photometric filters (405, 450, 492, 620mm), 1 luminometric highpass filter (570mm), dust cover, user
manual and spare fuses.
Specification
Detection system
Spectral sensitivity range, nm
Sensitivity at 545nm
Dynamic range, RLU
Filters
Sample formats
Dispensers
Photometer
Spectral range, nm
Capacity
Measurement range, OD
Resolution, OD
Accuracy
Linearity
Data Interfaces
Display and keyboard (Lucy 3)
Printer (Lucy3)
Dimensions (wxhxl), mm
Weight, kg
Cat No.
Photon counting PMT
300–650
Typically 0.2fW, 50 amol ATP
0.001 to 99.999 (kcounts/sec)
Filter wheel for up to 15 luminescence- and photometric filters.
Opaque and transparent microplates, filter bottom
microplates or other sample arrays of similar dimension.
2 supplied. Can be supplied without dispensers on request
Standard volume/stroke: 50µl, metal free, exchangeable tubing
405–650
15 filters (4 supplied)
0–4.499
0.001
≤±1.5% at 1 OD
Less than or equal to ±1% and ±0.005OD at 1OD
Serial RS232
Parallel printer interface – 25-pin (Lucy 3)
25x42 characters colour graphics (640x480 pixels)
Keyboard with numeric keypad, cursors and function keys
Contact our Technical Office on 01342 826836
Lucy 2: 330x173x465 Lucy 3: 354x255x466
10.6 (Lucy 2)/ 11.8 (Lucy 3)
Description
700-262 Lucy 2 luminometer for PC control with ADAP Basic control
and evaluation software
700-263 Lucy 3 stand-alone luminometer with on-board software and
ADAP Basic software for PC
Price
POA
POA
Options
Cat No.
Description
700-271 ADAP Plus software (includes ADAP Basic)
700-269 ADAP Expert software (includes ADAP Plus)
Price
POA
POA
For more information on optional software please see page 632 or contact our Technical Office on 01342 826836.
638
Take a look at our latest products on www.ecomcat.co.uk
FLUOstar OPTIMA & POLARstar OPTIMA
The Flexible Solution for Your Laboratory
The Multifunctional plate reader with an easily upgradeable modular design.
Choose from up to four read modes.
• Fluorescence Intensity
• Time-Resolved Fluorescence
• Absorbance UV /Vis
• Luminescence (Flash and Glow) assays
• 6-384 well plates user definable
• Accommodates up to 2 on board injectors for kinetic or flash assays
• Plate shaking, incubation, top/bottom reading and well scanning
• Gas Vent available to regulate the atmosphere for cell based or
bacterial assays
• 60°C temperature control option available
• Upgradeable to a POLARstar OPTIMA
POLARstar OPTIMA - Benefit from all the functionality of the FLUOstar OPTIMA
with the added features of:
• Fluorescence Polarization
• Simultaneous Dual Emission detection, Optimised for FRET and BRET
LUMIstar - The Dedicated Luminescence
Microplate Reader
The flexibility and performance of the LUMIstar allows more applications
to be adapted to luminescence than ever before.
•
•
•
•
•
•
•
Top and bottom reading
Highest sensitivity
Up to 3 Reagent Injectors
Injection, shaking and reading at the same time
Individual injection volume for each well in all formats up to 384
Flexible injection time and delay parameters for all kinetic scenarios
Optional incubation up to 60°C
Applications –
Providing solutions from the basic to more complex reactions
•
•
•
•
•
•
•
DNA, RNA and Protein Quantification + Genotyping
ELISAs, Immunological assays
Reporter Gene Assays, Cell based assays
FRET and BRET for protein-protein interactions
Ca2+, ion channel detection
Flexible injection time and delay parameters for all kinetic scenarios
Enzyme Kinetics
For more details of these products from BMG LABTECH please contact the Jencons-PLS Technical Office on 01342 826 836
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
Readers
BMG, LUMIstar Galaxy, Microplate Luminescence Reader
701-025
The LUMIstar Galaxy is a fully automated microplate-based luminescence reader, designed for the widest
possible range of luminescence applications. Flash kinetics as fast as 100ms, and glow kinetics of up to
12h are possible with the user-friendly Windows™ software. The XY microplate transport system moves
in increments as small as 0.1mm, which allows analysis of a wide range of plate formats.
■ ‘Digital Photon Integration’ (DPI) technology
■ Precise temperature control and flexible
shaking
■ Glow and Flash kinetics
Built-in syringe pumps access measurement
position
■
8 decades dynamic range
■
Sensitivity 0.2amol/well recombinant aequorin
■
Independent injection volumes for each well
■
Temperature regulated PMT
■
Reads up to 384 well plates
■
Specification
Measuring system
Liquid system
Cat. No.
Side window, photon counting, bialkali
photomultiplier tube. Spectral range from
290nm to 700nm. Dynamic range of 8 decades.
Software-selectable Gain 1:4000 in 150 steps
Three high-precision syringe pumps. Two
injectors simultaneously access the
measurement position. Injection volumes
software-selectable from 5µl to 350µl in 1µl steps
Shaking
Linear and orbital.
Shake times from 0 to 100 sec. in 1 sec. steps
Temperature control
Incubation range from ambient +5ºC to 45ºC
in 1ºC steps (60°C optional)
Temperature stability, ºC ±0.2
Temperature gradient, ºC <0.5
Sensitivity
5x10-19 mole/well recombinant Aequorin
Crosstalk
<3x10-5
Computer interface
RS232, 9600baud
Dimensions (wxhxl), mm 440x270x480
Description
Price
701-025 LUMIstar Galaxy computer-controlled luminescence reader side window PMT (250-750µm range), integral reagent
compartment. Plate formats 1536, 384, 96, 48, 24 and Terasaki orbital and linear shaking. Windows™ based
control software and Microsoft Excel™ worksheet macro included
701-023 Temperature control >45°C (25ºC to 60ºC)
701-024 Reagent injection
POA
POA
POA
BMG, FLUOstar Optima, Microplate Reader
701-020
The FLUOstar Optima is a fully-automated microplate reader that incorporates four different
measurement principals: standard fluorescence, time-resolved fluorescence, absorbance (OD) and high
performance luminescence (2,000,000 cps). The unit can be configured with on-board reagent
dispensers and an incubation chamber. It covers the wavelength range from 240nm to 740nm and reads
a 384 well plate within 28 seconds.
■ Built-in syringe pumps access measurement
■ Reads up to 1536 well plates
position
(fluorescence only)
■
Programmable multiple fluorophore analysis
■
Sensitivity 0.9fmol/well fluorescein
■
Instant top and bottom switching
■
15 second reading time (96-well plate)
Specification
Standard
fluorescence
Spectral range (excitation and emission)
240nm to 740nm. Dynamic range 8 decades. Sensitivity
0.9fmol/well fluorescein
Time-resolved Spectral range (excitation and emission)
Fluorescence 240nm to 740nm. Dynamic range 7 decades. Sensitivity
50amol/well europium
Absorbance
Spectral range 240nm to 740nm. Dynamic range 0.000
to 3.000 OD. Reproducibility 0.010 OD for 0–2 OD
range, 0.030 OD for 2–3 OD range
Luminescence 0.5fmol/well ATP
Detector
Side window, current type photomultiplier tube
Filters
Filter wheels for 8 excitation and 8 emission filter positions
Gain control Software-selectable Gain 1:65535 in 4095 steps.
Automatic Gain calculation
Cat. No.
Light source
Shaking
Reagent dispensers
High-energy Xenon flash lamp
Linear and orbital shaking
Two built-in syringe pumps access
measurement position. Variable injection
speed. Individual injection volumes for
each well. Reagent backflushing
Incubation
Incubation range from ambient +5ºC to
45ºC in 0.1ºC steps
Temperature stability, ºC ±0.2
Temperature gradient, ºC <0.5
Microplate formats
Up to 1536, data recognition up to 384
Computer interface
RS232, 9600baud, binary communication
protocol
Dimensions (hxwxd), mm 270x480x440
Description
Price
701-020 FLUOstar Optima computer-controlled fluorescence and absorbance reader. Extended PMTs (240 to 740nm range),
2 filter wheels with 8 excitation and 8 emission filter positions. Supplied with 4 excitation and 4 emission filters,*
Windows™ based control software and Microsoft Excel™ worksheet macro included
POA
* Excitation filters: 320nm, 355nm, 390nm, 485nm, 515nm, 544nm, 584nm and time-resolved (310nm to 370nm). Emission filters: 405nm, 460nm, 538nm,
555nm, 590nm, 612nm, and time-resolved. Please specify when ordering.
640
Take a look at our latest products on www.ecomcat.co.uk
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
Readers
BMG, POLARstar Optima,
Microplate Fluorescence
Polarisation Reader
701-021
The POLARstar Optima is a fully automated
microplate reader that incorporates five different
measurement principals: standard fluorescence,
time-resolved fluorescence, fluorescence polarisation, absorbance (OD) and high performance
luminescence (2,000,000 cps). The unit can be
configured with on-board reagent dispensers
and an incubation chamber. The wavelength
range for standard and TR fluorescence is 240nm
to 740nm (extended wavelength to 900nm is
available, please enquire for details).
■
Simultaneous dual emission detection system
■
Instant top and bottom optics switching
■
Built-in syringe pumps access measurement
position
■
Programmable multiple fluorophore analysis
■
Precise temperature control and flexible
shaking
■
Reads up to 384 well plates (1536 standard
fluorescence and TR fluorescence)
■
Sensitivity 500fmol/well fluorescein
(polarisation mode), 0.9fmol/well fluorescein
(intensity mode)
Specification
Standard fluorescence
Time-resolved fluorescence
Fluorescence polarisation
Absorbance
Luminescence
Light source
Detector
Filters
Gain control
Cat. No.
Spectral range (excitation and emission)
240nm to 740nm. Dynamic range 8
decades. Sensitivity 0.9fmol/well
fluorescein
Spectral range (excitation and emission)
240nm to 740nm. Dynamic range 7
decades. Sensitivity 50amol/well
europium
Spectral range (excitation and emission)
350nm to 740nm. Dynamic range 5
decades. Sensitivity 500fmol/well
fluorescein
Spectral range 340nm to 740nm. Dynamic
range 0.000 to 3.000 OD. Reproducability
0.010 OD for 0–2 OD range, 0.030 OD for
2–3 OD range
0.5 fmol/well ATP
High-energy Xenon flash lamp
Side window, current type photomultiplier
tube
Filter wheels for 8 excitation and 8
emission filter positions
Software-selectable Gain 1:65535 in 4095
steps. Automatic Gain calculation
Shaking
Reagent dispensers
Incubation
Temperature stability, ºC
Temperature gradient, ºC
Microplate formats
Reading time
Computer interface
Power requirements
Dimensions (wxdxh), mm
Weight, kg
Description
Linear and orbital shaking
Programmable shake time and width
Two built-in syringe pumps access
measurement position. Variable injection
speed. Individual injection volumes for
each well. Reagent backflushing
Incubation range from ambient +5ºC to
45ºC in 0.1ºC steps
±0.2
<0.5
Up to 384, Standard and TR fluorescence
up to 1536
Dependent on test definition. Shortest
reading time 14 seconds for 96 well plate,
28 seconds for 384 well plate
RS232, 9600baud, binary communication
protocol
100/115/230V, 50/60Hz, maximum
200VA
440x480x270
28
Price
701-021 POLARstar Optima computer-controlled fluorescence polarisation reader
2x extended wavelength PMTs (240nm to 740nm range)
2 filter wheels with 8 excitation and 8 emission filter positions
Supplied with 4 excitation and 4 emission filters*
High energy xenon flash lamp. Windows® based control software
and Microsoft Excel™ worksheet macro included
701-024 Reagent injection
POA
POA
* Excitation filters: 320nm, 355nm, 390nm, 485nm, 515nm, 544nm, 584nm and time-resolved (310nm to 370nm)
Emission filters: 405nm, 460nm, 538nm, 555nm, 590nm, 612nm, and time-resolved, please specify when ordering
Take a look at our latest products on www.ecomcat.co.uk
641
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
448-364
Readers
Tecan, Genios FL Fluorometer, Genios and
Genios Plus Multi-label Readers
There are three Genios readers available, the Genios and Genios Plus are multifunction readers, while the Genios FL is a dedicated microplate fluorometer.
Genios FL
Competitively priced fluorescence-only instrument suitable for fluorescence
assays in the VIS-nIR range.
■
High energy flash lamp for numerous applications
■
Optional temperature control (ambient +5°C to 42°C)
■
Ideal for fluorescence-based ELISA
Filters included:
Fluorescence Excitation 360nm and 485nm
Fluorescence Emission 465nm and 535nm
448-370
Genios
The Genios is the optimal multi-detection system for a variety of molecular
biology applications, including DNA quantification, cell based assays, fluorescence-based ELISAs, kinetic studies and expression studies (GFP).
■
Fluorescence intensity - top and bottom reading
■
Time-delayed fluorescence
■
Absorbance
■
Luminescence (glow type)
■
Temperature control
■
PCR tubes and cuvette compatibility
■
Plate formats from 6 to 384 wells (1536 Genios Plus)
■
Connect stacker system (optional)
■
QC plate for absorbance
448-354
Filters included:
Fluorescence Excitation 360nm and 485nm
Fluorescence Emission 465nm and 535nm
Absorbance 260nm, 280nm, 340nm, 595nm
Genios Plus
The Genios Plus includes all the benefits of the Genios and further enables:
■
Higher sensitivity through high quality quartz fibres
■
Optimised performance for cell based assays
■
UV range fluorescence measurement (customized filter set)
Filters included:
Fluorescence Excitation 360nm, 430nm, 485nm and 590nm
Fluorescence Emission 465nm, 535nm, 595nm, 635nm
Absorbance 405nm, 450nm, 492nm, 620nm
All Genios readers are supplied with XFluor software for instrument control
and data acquisition (compatible with Excel™ 2000 or Excel™ XP). Magellan
software is available as an optional extra for more advanced data reduction
and report generation.
642
Take a look at our latest products on www.ecomcat.co.uk
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
Readers
Tecan, Genios FL Fluorometer, Genios and Genios Plus
Multi-label Readers, continued…
Specifications
Model
Measuring speed
Temperature control
Plate shaking
Fluorescence
Measurement mode
Wavelength range, nm
Sensitivity
(fluorescein/well/black plate)
Time resolved measurements
Plate formats
Absorbance
Wavelength range, nm
Accuracy
Plate formats
Glow type luminescence
Wavelength range, nm
Sensitivity
Genios FL
Genios
Genios Plus
<30 seconds (96-well plate), (all models)
Optional
Ambient +5 to 42°C
Ambient +5 to 42°C
Linear or orbital in 3 different speeds, (all models)
Plate formats
Additional information
Interface
Robot compatible
Power supply
Dimension (wxdxh), mm
Weight, kg
Top
340–700
<3pg
Top and bottom
340–700
<3pg
Top and bottom
230–700
<1.5pg
20–2000µsec
up to 384-well plates
20–2000µsec
up to 384-well plates
20–2000µsec
up to 1536-well plates
N/A
N/A
N/A
230—1000
<±0.010 OD
up to 384-well plates
230—1000
<±0.010 OD
up to 384-well plates
N/A
N/A
N/A
400—700
400—700
0.4x10-6 activity units alkaline phosphatase
(Genios & Genios Plus models)
96-well plate
96-well plate
Serial via RS232
Yes
Autosensing
380x415x170
18.8
Serial via RS232
Yes
Autosensing
380x415x170
18.8
Cat. No.
Description
448-370
448-371
448-354
448-364
Genios FL microplate fluorescence reader
Genios FL microplate fluorescence reader with temperature control
Genios multi-detection microplate reader
Genios Plus multi-detection microplate reader
Wizard guide
Serial via RS232
Yes
Autosensing
380x415x170
18.8
Kinetic curve comparison
Price
POA
POA
POA
POA
Options
Cat. No.
Description
Price
448-369 Magellan software (2 user license*)
POA
* 5 user licences are also available.
Kinetic evaluation according to the
Hanes equation
For extra filters and other options and accessories, please enquire on 01342 826836.
Magellan Software
Instrument control and data reduction software supporting the complete line of Tecan microplate readers.
Magellan supports all detection modes including fluorescence intensity, fluorescence polarisation, timeresolved fluorescence, glow luminescence and absorbance, as well as all plate formats up to 1536 wells.
Wizard guides provide step-by-step guidance for even complex assays and calculation modes.
Comprehensive data reduction for kinetic, screening, curve fitting and a broad range of other applications are provided. All major curve fitting methods are included and an enhanced kinetic evaluation
package enables individual curve comparisons. Automated data export in variable formats and customisable report forms help to meet any specific requirements for data storage.
System requirements: Windows 2000 or higher, minimum processor P4 or equivalent, 64MB RAM
memory, video resolution 800x600.
384-well evaluation
Electronic Signatures
Customers woking in an FDA regulated laboratory have a further option via Magellan, permitting data
management in a manner compliant with CFR21 part II. For further information and pricing, please call
01342 826836.
Screening evaluation
Take a look at our latest products on www.ecomcat.co.uk
643
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
448-400
Readers
Berthold, Twinkle™ LB 970 Microplate Fluorometer
The Twinkle™ LB 970 is a dedicated fluorometer for microtitre plates. Clear and opaque standard configuration 6-, 12-, 24-, 48-, 96-, 384- and 864-well microtitre plates are compatible. Terasaki plates and
Petri dishes are compatible with optional adaptors.
Three plate mixing modes are available: linear, orbital and double orbital (speed and amplitude is adjustable).
Counting modes: Top fluorescence (340–650nm), bottom fluorescence, scanning and fast or slow kinetics.
Scanning of wells (several measuring points within a well) plus top and bottom reading are available for
all plate types. Measurement time per well is software selectable between 0.1–600 seconds.
Temperature control (optional) can be set from, ambient +5°C to 42°C, controlled to within 1°C.
The LB 970 comes complete with Windows® based software.
Specification
Excitation
Detector
Excitation filter slide
Emission filter slide
Counting performance
Dimensions (hxwxd), mm
Weight, kg
Cat. No.
Tungsten halogen lamp (340-700nm), 75W, lifetime >50h (typically >300h)
Photomultiplier tube, digital photon counting, high cathode sensitivity,
low noise photo cathode.
5 filter positions: Factory installed standard high quality interference filters,
355 (30)nm and 485 (15)nm
4 filter positions: Factory installed high quality
interference filters, 460 (30)nm and 535 (30)nm filters.
Fluorescein detection limit <10 fmol/well
280x465x406
17
Description
Price
448-400 LB 970 Twinkle™ Fluorometer, top reading
448-401 LB 970 Twinkle™ Fluorometer, top and bottom reading and temperature control
POA
POA
For information on special adaptors for Terasaki pla0tes and Petri dishes and other accessories, please contact our
Technical Office on 01342 826836.
448-402
Berthold, LB 96V MicroLumat Plus Luminometer
Universal microplate luminometer with highest sensitivity in the wavelength range of 380 - 630 nm for
all common bio- and chemiluminescence applications in 96- or 384-well plates. The instrument can be
used as a stand-alone instrument or operated with an external PC, using the WinGlow Windows® based
measuring and evaluation software (supplied) for complex programs and kinetics measurements
(including cellular luminescence).
For stand-alone operation the instrument can be controlled from the built-in keyboard and user friendly
on-board software. Measured results can be transferred to an external computer and/or printer.
■
Instrument versions available for manual injection or with 1, 2 or 3 automatic injectors of variable
volumes (25–300µl). “Jet injection” ensures optimum reagent mixing
■
Temperature control (optional) can be set from ambient +5°C to 42°C in 0.1°C steps
The LB 96V MicroLumat Plus is supplied with interface for printer control (RS232C) and bi-directional RS232C
computer interface, printer cable, 5 white microplates (LB 96 V-WMP) and WinGlow PC software.
Please note that a serial printer is needed to run the LB 96V as a stand-alone unit.
A PC system is required to control the MicroLumat and to evaluate results using external software.
Specification
Sensitivity
Injector accuracy/volume, µl
Crosstalk
Dynamic range
Injector precision
Ambient temperature, °C
Dimensions (wxdxh), mm
Weight, kg
644
Better than 20 attomole ATP
±3/25–300
<3x10-5 spillover from adjacent well
More than 6 orders of magnitude
<0.5% (at 300µl<0.1%)
15 to 30 recommended
600x502x290
approx. 30 (net)
Cat. No.
Description
448-183
448-184
448-185
448-402
448-186
448-403
448-404
448-405
LB 96V-0 MicroLumat Plus luminometer, manual model (no injectors)
LB 96V-1 MicroLumat Plus luminometer, 1 injector
LB 96V-2 MicroLumat Plus luminometer, 2 injectors
LB 96V-3 MicroLumat Plus luminometer, 3 injectors
LB 96VH-0 MicroLumat Plus luminometer, manual model, temperature control
LB 96VH-1 MicroLumat Plus luminometer, 1 injector, temperature control
LB 96VH-2 MicroLumat Plus luminometer, 2 injectors, temperature control
LB 96VH-3 MicroLumat Plus luminometer, 3 injectors, temperature control
Take a look at our latest products on www.ecomcat.co.uk
Price
POA
POA
POA
POA
POA
POA
POA
POA
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
Shakers/Incubators
Inca Personal Microplate Incubator
583-154
New
583-154
New
The Inca is a personal microplate incubator that provides reliable, accurate and long-life operation.
It has a small footprint of just 120mmx180mm.
■ Variable temperature control
■
Accommodates all plate types
■
Temperature or elapsed time display
■
Easy microplate location
■
Built-in timer with buzzer
■
No maintenance required
■
Minimum evaporative loses with
uncovered plates
■
Low voltage for added safety
■
Ideal for field applications
Whether you are a laboratory technician or a diagnostic kit manufacturer, the Inca is the natural choice
for single microplate incubation. The unique design and advanced electronic temperature control
guarantees stable and accurate performance combined with quiet operation.
Specification
Temperature range, °C
Accuracy, °C
Timer, mins
Time setting resolution, mins
Temperature/timer display
Dimensions (wxdxh), mm/Weight, g
Heater power, W
Operating voltage
Power consumption, Amps
Power supply
Environmental operating temp, °C
Environmental storage temp, °C
Fuse rating
Cat. No.
amb. +5 to 45
>±0.5 of set temperature
0 to 999
1
3 digit LCD
120x180x100/920
15
100-230Vac 50/60Hz
1.25
12V 2A DC, centre +
10 to 40
4 to 40
1.25A T
Description
Price
583-154 Inca Microplate Incubator
POA
Orbis Compact and Orbis Plus Microplate Shakers
The Orbis shaker is a compact choice of microplate shaker for any test environment. With a footprint,
marginally larger than that of the microplate it shakes, the Orbis offers the most economical and advanced
solution for your shaking applications, as well as being competitively priced. The counter-balanced orbital
movement guarantees a stable, quiet and long life operation. The Orbis shaker can be operated as a stand
alone unit or alternatively, be easily integrated into a robotic system, with a remote on/off control.
■
All styles of microplate accommodated
■
Variable speed control
■
Momentary shaking action
■
Timer function (Orbis Plus only)
■
No maintenance required
■
Low voltage supply for added safety
■
Brushless DC motor for quiet and reliable
long life operation
■
Ideal for field applications
■
Washable, anti-slip mat
700-235 shown with accessory
microtube shaker platform 700-241
Both Orbis shakers can operate as microtube shakers when used with an accessory tube platform. This
131x90mm platform accommodates 40 tubes with diameters 10.5 to 12.7mm.
Specifications
Model
Orbis
Orbis Plus
Shaking orbit
1mm radius
1mm radius
Capacity
1x96 well microplate
1x96 well microplate
Shaking speed range, rpm
950 to 1300
950 to 1300
Timer function (Orbis Plus only)
————
1 to 180 mins and continuous
Dimensions (wxdxh), mm
93x133x72*
93x133x72*
Electrical
230V 50/60Hz/110V 50Hz (both models)**
Power consumption
65mA
65mA
Power supply
15V 100mA DC
15V 100mA DC
Environmental operating temperature, ºC
+10 to 40
+10 to 40
Environmental storage temperature, ºC
+4 to 40
+4 to 40
Weight, g
715
715
* Height with lid 87mm ** Please specify power supply when ordering
Cat. No.
Description
700-235
700-236
700-237
700-241
Orbis microplate shaker
Clear lid for Orbis shaker
Orbis Plus microplate shaker with timer, supplied with clear lid
Platform for Orbis microplate shaker, holds 5x8 microtubes
700-237
Price
POA
POA
POA
POA
Take a look at our latest products on www.ecomcat.co.uk
645
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
New
583-210
Incubator Shakers
Grant-bio, PHMP Microplate Thermoshaker
The PHMP microplate thermoshaker is for use with all types of standard depth 96- and 384-well plate.
Enhanced by a heated lid, the PHMP provides the optimum heating environment for your samples,
combined with powerful orbital shaking to produce the maximum yield from your incubations.
Comprising three instruments in one, the PHMP is highly versatile in application:
■
Microplate thermoshaker
■
Compact benchtop incubator without shaking
■
Microplate shaker without temperature control, for operation in a coldroom
Good temperature transfer to samples within the wells of microplates is inherently difficult to achieve,
as the point of contact between the microplate well and a flat heating plate is very small. Our solution
lies in the heated lid, with considerable advantages resulting from bi-directional heating:
New
583-210
■
Excellent temperature stability
■
Excellent temperature uniformity across the plates for optimum consistency of results, independent of room temperature
■
Condensation is prevented, which is crucial when handling micro-volume samples, particularly at
high temperatures
The Grant-bio PHMP microplate thermoshaker is compact, with a low profile and small footprint. It is
also extremely quiet. The powerful motor produces regulated and reproducible rotation throughout the
speed range and, combined with the sturdy construction, will guarantee years of consistent operation.
The PHMP is extremely easy to operate, with very simple set-up of temperature, speed and time, using
the two line set-up and status display.
Applications
Suitable for applications in many fields, including:
Molecular biology – for bacterial cultivation
and DNA analysis
■
Molecular chemistry – for matrix analysis
■
Immunochemistry
■
Cytochemistry – for in-situ reactions
■
Molecular diagnostics
■
Biochemistry – for enzyme and protein analysis
■
ELISAs
■
Low voltage power supply enables safe cold
room operation
■
Operating ambient temperature range 4°C
to 45°C, for use in a cold room or incubator
■
Meets the requirements of IEC61010
parts 1 and 2
■
CE marked
■
Two year warranty
■
Features:
■
Variable speed: 300 to 1200 rpm
■
2mm shaking orbit for effective mixing
■
Soft start
■
Temperature range: ambient + 5 to 60°C
■
Timed operation: 1 minute to 96 hours with
buzzer and automatic switch-off
■
Accommodates 2 standard depth 96- or
384-well plates
Specification
Temperature range, °C
Stability, °C
Uniformity, °C
Shaking speed, rpm
Speed setting resolution, rpm
Orbit mm
Timer
Time setting resolution, mins
Heat-up time, RT to 37°C, mins
Overall dimensions (wxdxh) mm
Ambient temperature range, °C
Input voltage, V
Input type
Input current, A
Cat No
amb +5 to 60
±0.1
±0.2
300 to 1200
10
2
1 min to 96 hrs
1
15 to 20
265x250x125
4 to 45
12
dc
5
Description
583-210 PHMP Microplate Thermoshaker
646
Take a look at our latest products on www.ecomcat.co.uk
Price
POA
Microplate Equipment
Shakers
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
Grant-bio, PMS-1000 Microplate Shaker
583-208
New
583-208 shown with 583-209
New
The Grant-bio PMS-1000 microplate shaker provides reliable, regulated shaking for two or four
microplates. With a speed range of 300 to 1000 rpm, the PMS-1000 can be adjusted to suit the
application - gentle shaking to ensure that the well contents are not ejected, or more vigorous agitation
for effective aeration across the small surface area of each of the wells. Speed setting is simple, using a
graduated dial. Operation may be continuous or timed, with the integral electronic timer ensuring an
accurate count-down for repeatability of time-sensitive incubations. Timer setting is straightforward and
the LED status display clearly indicates time remaining.
Designed to meet the challenge of workspace restrictions, the Grant-bio microplate shaker is compact,
with a low profile and small footprint, for personal application. It is also extremely quiet. Simple screw
attachments allow quick and easy fitting of any standard depth 96- or 384-well plates, holding the plates
securely in place. The PMS-1000 is robust and reliable, designed for long-term operation.
Applications
Suitable for mixing, incubation and cultivation of biological and chemical components in many fields,
including microbiology, cell and molecular biology, pharmacology, immunology, medicine, biotechnology. Specific applications include:
■
Immunoassays
■
HTS applications
■
Colouration tests
■
Binding of template DNA to silica-coated magnetic beads
Features:
■
Variable speed: 300 to 1000rpm
■
Orbit: 2mm
■
Integral timer, 1 min to 24 hours, with automatic switch-off
■
Standard platform for two microplates, optional accessory platform for four microplates
■
Low voltage power supply enables safe cold room operation
■
Operating ambient temperature range 4°C to 45°C, for use in a cold room or incubator
■
Low energy consumption
■
Meets the requirements of IEC61010 parts 1 and 2
■
CE marked
■
Two year warranty
Specification
Speed, rpm
Orbit, mm
Timer
Time setting resolution, sec
Ambient temperature range, °C
Footprint wxd, mm
Overall height, mm
Capacity
Input voltage, V
Input type
Input current, A
Cat No
300 to 1000
2
1 min to 24 hrs
10
4 to 45
175x185
90
2 microplates as standard
4 microplates with optional platform
12
dc
1.2
Description
Price
583-208 PMS-1000 Microplate shaker
POA
Accessories
Cat No
Description
Price
583-209 Platform to accommodate 4 microtitre plates; allows shadow-free positioning
of all four plates; screw fittings for ease and speed of plate installation,
to retain the plates securely in position
POA
Take a look at our latest products on www.ecomcat.co.uk
647
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
New
Shakers/Incubator Shakers
AQS500 Microplate Shakers/Mixers
582-107
The AQS500 microplate mixer is a fixed speed (1500rpm), small orbit, 2 or 4 plate mixer for every day
use. Its 1.5mm orbit allows 300µl of liquid per well and ensures even and consistent mixing.
Specification
Speed, rpm
Orbit, mm
Overall dimensions (wxdxh), mm
Carrying capacity, kg
Electrical requirements
Cat. No.
1500
1.5
210x160x120
6.5
220-240V, 50Hz
Description
Price
582-107 AQS500 Microplate shaker/mixer for 2 plates, fixed speed
582-108 AQS500B Microplate shaker/mixer for 4 plates, fixed speed
New
582-109
POA
POA
An analogue timer can be fitted. Please contact our Technical Office on 01342 826836 for details.
Microplate Incubator Shakers
This 2 plate incubator shaker offers the ultimate in environmental control for micro-plate assays. The
IS89/2 provides accurate control over all parameters. The temperature range of ambient to 54ºC is
controlled within ± 1ºC with 0.2ºC across the plate. The shaker speed is variable between 10–1300rpm.
Specification
Speed range, rpm
Temperature range, °C
Temperature control, °C
Temperature control across plate, °C
Overall dimensions (wxdxh), mm
Carrying capacity
Electrical requirements, V/Hz
Cat. No.
10–1300
ambient to 54
±1
±0.2
316x430x203 (lid down)
2 plates
220-240V, 50Hz
Description
Price
582-109 IS89/2 Incubator shaker for 2 microplates
582-110 IS89/2 Incubator shaker for 2 microplates with analogue timer
New
583-155
POA
POA
Stuart, SSM5 Mini Microplate Shaker
Designed for use with microtitre plates and microcentrifuge tubes. The aluminium tray is fitted with a
specially designed mat that securely holds in place up to four microtitre plates. High speed combined
with a tiny orbit creates the vibrational shaking action required for mixing the very small volumes
contained in the wells or in microcentrifuge tubes.
Speed is variable from 250 to 1250 rpm and is easily set via the digital display. Shaking times can be set
from 1–999 minutes on the built in digital timer. The unit can also be set for continuous operation.
Tube holders are available as optional accessories. They fit securely onto the platform turning the unit
into an effective tube mixer.
Specification
New
583-155 shown with 583-156
and 583-013
Shaking action
Speed range, rpm
Orbit, mm
Display
Timer, mins
Capacity
Maximum load, kg
Platform size (wxl), mm
External dimensions (wxdxh), mm
Electrical supply
Weight, kg
Orbital
250 to 1250
1.5
Digital
1–999
4 plates
1
220x220
240x300x160
230V, 50Hz, 50W
5
Cat. No.
Description
583-155
583-156
583-157
583-013
SSM5 Mini orbital shaker, with anti-slip mat
SSM5/1 Tube holder for 50x 1.5ml tubes*
SSM5/2 Tube holder for 50x 0.5ml tubes*
SSM5/3 Tube holder for 50x 0.2ml tubes*
* SSM5 Mini shaker can take any 2 of the accessory tube holders at any one time.
Model SSM1 is also suitable for microplates. See page 916 for details.
648
Take a look at our latest products on www.ecomcat.co.uk
Price
POA
POA
POA
POA
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
Incubator Shakers
Jencons, Millennium 2000
Microplate Shaker Incubator
700-182
The Millennium 2000 is a unique microprocessor
controlled shaker incubator that accommodates
up to four microtitre plates in either 96-well or
384-well format. Three parameters, speed,
temperature and time, are programmed via the
control panel.
Countdown of remaining time as well as the
other two parameters are displayed on the LCD.
The plates remain visible to the user at all times
under the clear protection cover. For added safety
and peace of mind the Millennium 2000 is the
only microplate incubator shaker to work from a
low voltage supply.
■
Easy access to all four plates at all times for
loading & unloading
■
Uniform heating via air circulation
■
Unique open construction for easy
integration with robotic systems
■
Remote low voltage supply for safe working
■
Automatically adjusts to all voltage supplies
from 100V to 240V, 50/60Hz
■
Minimum bench space required
■
Easy to clean and maintain
■
Upgradeable for deep well plates
■
Optimal temperature uniformity of plates
Specification
Operating voltage/Hz
Remote power supply
Max current requirement, W
Heater power, W
Adjustable temperature range , °C
Temperature uniformity, °C
Readout precision, °C
Operational conditions, °C
Adjustable timer, minutes
Shaking orbit, mm
Adjustable speed, rpm
Weight (complete system), kg
Dimensions (complete system) (wxdxh), mm
100–240V/50–60Hz
24V/5.4A
130
100
5 above ambient to +45 in 1ºC increments
±1 (between plates)
±1
12 to 30
1–999 in 1 minute steps
1.5 inclusive
500 to 1300 in 10rpm steps
4.2
200x520x220
Cat. No.
700-182
Price
POA
Take a look at our latest products on www.ecomcat.co.uk
649
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
286-284
Shakers/Incubator Shakers
Heidolph Titramax Microplate Shakers
The Titramax range of moulded platform shakers are designed to accept snap fit of 4 to 6
microplates measuring 85x128 mm. The 100 and 1000 models produce circular vibrations with a
steplessly variable frequency between 150 and 1350rpm, with an amplitude of 1.5 mm. The 101
model provides circular vibrations with an orbit of 3.0mm. Both models have a three year
warranty. The Titramax 1000 shaker can be used with the Incubator 1000 with low hood for stable
temperature control. For details and ordering of the Incubator 1000 see page 921.
Specifications
286-285 shown with 286-308 incubator
1000 with low hood (see page 921)
Model
Type of motion
Shaking frequency, rpm
Speed setting
Orbit, mm
RPM display
Timer
Unit weight, kg
Dimensions (wxdxh), mm
Standard version
shaking platform
Titramax 100
Titramax 101
Titramax 1000
Circular/vibrating
Circular/vibrating
Circular/vibrating
150 to 1350
150 to 1350
150 to 1350
Electronic
Electronic
Electronic
1.5
3.0
1.5
Scale
Scale
Scale
0–120 min or continuous for all
5.5
5.5
6.5
245x310x125
245x310x125
320x125x375
Pickup plate for
Pickup plate for
Pickup plate for
4 microtitre plates
4 microplates
6 microtitre plates
Cat. No.
286-284
286-780
286-285
Price
POA
POA
POA
Jencons, Microplate Incubator Shakers
This range of microplate incubator shakers includes the IS89 Standard microplate incubator shaker
accommodating 6x96 well standard microplates or 6 standard culture flasks and the IS89HT High
Top model accommodating 6x96 deep well microplates. All these models are available with an
optional timer (variable from 2–58 mins).
582-100
They have a normal working temperature range from ambient +5°C to 54ºC with a sensitive thermostatic control maintaining the pre-set temperature to within ±1ºC. A large horizontal fan
provides total, continuous air movement, heating to equilibrium in a very short time and with a
maximum variation of only ±0.2ºC.
A micro switch which is activated immediately on opening the lid switches off the heating and
shaking systems. This allows easy access and ensures that the pre-determined temperature and
agitation re-commences at the original settings.
Specifications
Housing/ lid
Capacity
Time setting
Speed
Temperature range, ºC
Thermostatic control, ºC
Heaters, W
Temperature tolerance, ºC
Temperature change, ºC
Dimensions (wxdxh), mm
650
Grey stove enamelled aluminium/ smoked perspex
6x96 well microplates or 6 standard culture flasks (582-100, -104)
IS89HT 6x96 deep well microplates (582-101, -102)
Variable from 2 to 58 minutes (models with timer only)
0 to 1300rpm, orbit 3mm radius
Ambient +5 to +54
Better than ±1
1 to 250
±0.2 across plate
+20 in 1 minute
460x500x160 (582-100, -104)
460x500x250 (582-101, -102)
Cat. No.
Description
582-100
582-104
582-101
582-102
IS89 Microplate incubator shaker
IS89T Microplate incubator shaker with timer
IS89HT High Top microplate incubator shaker
IS89HT/T High Top microplate incubator shaker with timer
Take a look at our latest products on www.ecomcat.co.uk
Price
POA
POA
POA
POA
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
Shakers/Incubators
IKA®, MTS 2/4 digital Orbital Microplate Shaker
583-149
The MTS 2/4 is a specially developed shaker for shaking two or four microtitre plates. The
speed and the stroke are optimally adapted for shaking microtitre plates. The electronic
control keeps the set speed constant via rated/actual speed comparison. A digital timer
allows a time selection of 1–99 min. The MTS 2/4 digital is especially suited for medical
diagnostics.
Specification
Shaking motion
Orbit diameter, mm
Speed range, rpm
Speed display
Timer
Timer display
Permissible ON time
Maximum shaking load
Motor rating input/output, W
Dimensions (wxdxh), mm
Weight, kg
Cat. No.
Horizontal, circular
3.0
0–1100
Scale
∞/1–99 min
Digital
100 %
2/4 microtitre plates
19/5
185x320x105
2.7
Description
Price
583-149 MTS2/4 digital orbital microplate shaker
POA
Stuart, SI19 Microplate Incubator
397-010
New
397-010
New
Specially designed for use with microtitre plates, which can be difficult to incubate. In conventional incubators, when 4 or more plates are placed on a shelf, they block the air
circulation, which can seriously impair temperature distribution.
The SI19 incubator overcomes this problem with forced air circulation, which blows
preheated air across the shelves rather than through them. Microtitre plates are also prone
to drying out during incubation. The SI19 remedies this with a water tray to increase the
humidity within the chamber.
The bright LED display indicates temperature and the encoder control allows rapid and
accurate temperature setting. An over-temperature protection system automatically tracks
the set temperature and controls the heater in the event of a fault. Error codes are displayed
if a fault has occurred or if the set temperature has been interrupted.
An acrylic upwards opening door provides excellent access to the interior. The stainless steel
chamber features 4 shelves each accommodating 6 plates (or 12 stacked in 2 layers). Shelves
are captive and slide out for easy loading.
■
Compact unit
■
Ideal for microtitre plates and Petri dishes
■
Laminar flow air circulation
■
Digital setting and display of temperature
■
Convenient upward opening door
■
Stainless steel interior
Specification
Nominal capacity, litres
Temperature
Range, °C
Fluctuation (at 37°C), °C
Variation, °C
Display type
Display resolution
Dimensions (wxdxh), mm
Internal
External
Weight, kg
Electrical supply
Cat. No.
Description
397-010 SI19 microplate incubator
20
Ambient +8 to 60
±0.5
±0.5
LED
1°C
250x230x200
380x380x435
24
230V, 50Hz, 280W
Price
POA
Take a look at our latest products on www.ecomcat.co.uk
651
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
New
Heaters/Sealers
Clifton, BH-M Series, Thermuplate Block Heater
357-101
This stylish and robust stainless steel unit is specially suited for skirted or unskirted 96-well format microplates,
strips or micro tubes. This unit consists of a low profile, durable, corrosion resistant, stainless steel case with
chemically resistant wipe clean control panel. The sloping control panel features touch buttons to enter
temperature and time values. Indicators show heating, alarm, time and set point modes in use.
■
Clearly visible LED display (time or temperature display, digital PID control, menu driven data entry)
■
Time and temperature settings retained after power off
■
Control options: temperature control only, temperature and time, process – two temperature set points
■
3 year warranty
Specification
Temperature
Display resolution, °C
Range, °C
Sensitivity, °C1
Uniformity well to well, °C1
Over temperature alarm
Timer
Display resolution, mins
Settings, mins.
Time cycle
Cycle end
Cat. No.
0.1
amb+5 to +100
±0.1
±0.1
+4°C, with heater
cut off, indication
1
variable 0–999
activated @
set point 2
audible buzzer
and “end” message
Heater, W
Heating well dims.
(wxdxh), mm
Capacity, options
Overall dims.
(wxdxh), mm
Voltage, V
250
140x50x72
12x thin wall strips 8x0.2ml
micro tubes ‘v‘ well, 1x96
‘v‘ well, microplate 0.2ml –
skirted full or mini, 1x96
‘v‘ well, microplate 0.2ml –
unskirted, 96x thin wall
0.2ml micro tubes ‘v‘ well
200x295x95
2302
Description
Price
357-101 BH-1M Thermuplate block heater
1. @ 60°C.
POA
2. 120V available please enquire for details on 01342 826836.
Thermobond®, Heat Sealer
New
448-068
The Thermobond heat sealer is designed to seal polypropylene and polystyrene tubes, microtitre plates,
deepwell plates and strips with a specially prepared film or foil, to prevent sample evaporation or leakage
during storage and transportation.
Heat is applied to the surface of the film creating a fine melt of the coating to the surface of a tube or
microplate being sealed. The process is adhesive free and no heat is transferred to the sample. A variety
of interchangeable, metal blocks and spacer plates are available to cover virtually every application.
■
Prevents sample loss, evaporation and eliminates risk of cross contamination
■
Rugged construction to ensure sample holders remain perfectly flat for even, consistent sealing
■
PTFE coated heater plate allows easy removal of any surface build-up
Specification
Temperature of heating plate
Temperature stability
Temperature sensor
Over temperature cut-out
Warm-up time (from ambient)
Cat. No.
175°C
±5°C
Thermostat
180°C
Within 15mins
Heater type
Dimensions (wxdxh), mm
Power
Weight, kg
Cartridge
220x370x130
230V, 50Hz
5
Description
Price
448-068 Thermobond heat sealer supplied with 2 spacers, 1 locator to accommodate
deepwell microtitre plates, mains lead and instructions
POA
Optional mounting blocks
Cat. No.
Description
Price
448-248 Thin wall 96-well PCR plates. Accepts plates of all well shapes and sizes
448-069 96x0.2ml tube block for single, 8 and 12 strip tubes (without caps)
448-070 Flat block for rigid & semi-rigid microplates, (24-, 48-, 96-, 192-, 384-well plates)
POA
POA
POA
Sealing films and foils
Cat. No.
Description
Pack
448-071 Clear film for polypropylene 1
448-072 Plastic coated metal foil for polypropylene 2
448-073 Plastic coated metal foil for polystyrene 2
1. Temperature range -80°C to +95°C
652
25
25
25
2. Temperature range -80°C to +110°C
Take a look at our latest products on www.ecomcat.co.uk
Price
POA
POA
POA
Microplate Equipment
Order by phone➤ 01342 826836 Order on-line➤ www.ecomcat.co.uk
01342 826771 Website➤
www.jencons.co.uk
Order by fax➤
Robotics
Hamilton, Microlab® SWAP Microplate Handling Robot
448-000
New
The Microlab® SWAP is designed for precise and reliable transportation of different types of microtitre
plates, both in landscape and portrait format. If you need to automate assay screening, look no further.
The Microlab® SWAP offers a wide range of applications for your high throughput screening and
secondary screening. The flexibility allows easy integration of pipetting robots, as well as plate readers,
washers and storage equipment from a variety of manufacturers. The instrument is available in two
lengths - 420mm and 1400mm.
■
High-speed plate handling with increased efficiency
■
Flexible and easy to integrate
■
Four degrees of freedom
■
Two different track sizes available
■
No plate loss during or after a power failure
■
Low noise stepper motor technology
■
Automated plate detection
■
Easy-to-use Windows-based software
■
Re-gripping in portrait and landscape
■
Easy to “teach” with SWAP teaching box
Specifications
Model
Dimensions (hxwxd), mm
Weight, kg
Electrical requirements
Working range
X-Axis, mm
Y-Axis, mm
Z-Axis, mm
Rotation, °
Payload, kg
Resolution
X-Axis, mm/Step
Y-Axis, mm/Step
Z-Axis, mm/Step
Rotation, °/Step
Speed
X-Axis, mm/sec
Y-Axis, mm/sec
Z-Axis (down), mm/sec
Z-Axis (up), mm/sec
Rotation, °/sec
Gripper, mm/sec
Electronic box
Dimensions (hxwxd), mm
Weight, kg
SWAP 420
SWAP 1400
622x233x750
622x233x1730
22
33
<0.8-2 A, 100-250V, 50-60Hz (both models)
Computer requirements
Windows NT, Windows 98, 2000 or XP operating systems, including a
PS/2 Mouse, CD-ROM Drive, printer port, SVGA monitor with resolution
at least 600x800, at least 1 serial port, ~1 GB HDD and at least 32 MB
RAM (both models)
RS232 via Serial Port, CAN Input/Output
Firmware download without component changes using EEPROM
technology (both models)
CE, EMC, CSA, NRTL (both models)
Instrument communications
Certifications
420
1400
310 (both models)
235 (both models)
270 (both models)
0.5 (both models)
0.1 (both models)
0.1 (both models)
0.05 (both models)
0.018 (both models)
2-400 (both models)
2-500 (both models)
2-160 (both models)
2-110 (both models)
0.36-90 (both models)
3-15 (both models)
125x365x215 (both models)
5 (both models)
The Standard system comprises: Microlab® SWAP 420; software; base plate; stack holder for up to 4
stacks; stacker; shelving unit.
Cat. No.
Description
Price
448-000 Microlab® SWAP 420 standard system*
POA
* Please note that this does not include the cost of installation or drivers for incorporating 3rd party devices. Please
contact our Technical Office on 01342 826836 to discuss your requirements in detail.
For more information on options, accessories, compatible equipment and the SWAP 1400, please contact our
Technical Office on 01342 826836.
Take a look at our latest products on www.ecomcat.co.uk
653