Moxa EDS-518A-MM-SC network switch

Industrial Ethernet Solutions
EDS-518A Series
16+2G-port Gigabit managed Ethernet switches
››2 Gigabit plus 16 fast Ethernet ports for copper and fiber
››Turbo Ring, Turbo Chain, and RSTP/STP for network redundancy
››IEEE 1588 PTP, Modbus/TCP, LLDP, SNMP Inform, QoS, IGMP
snooping, VLAN, IEEE 802.1X, HTTPS, SNMPv3, and SSH
supported
ABC-01 (Automatic Backup Configurator) for system configuration
backup (optional accessory)
››
Introduction
The EDS-518A is a standalone 18-port managed Ethernet switch that
provides 2 combo Gigabit ports with built-in RJ45 or SFP slots for
Gigabit fiber optic communication. The Ethernet redundant Turbo
Ring and Turbo Chain (recovery time < 20 ms) increases the reliability
and speed of your network backbone. The EDS-518A also supports
advanced management and security features.
Features and Benefits
• IPv6 Ready logo awarded (IPv6 Logo Committee certified)
• IEEE 1588 PTP (Precision Time Protocol) for precise time
synchronization of networks
• DHCP Option 82 for IP address assignment with different policies
• Modbus/TCP industrial Ethernet protocol supported
• Turbo Ring and Turbo Chain (recovery time < 20 ms at full load),
and RSTP/STP (IEEE 802.1w/D)
• IGMP snooping and GMRP for filtering multicast traffic
• Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network
planning
Specifications
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
Protocols: IGMPv1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/
Client, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS,
Telnet, Syslog, DHCP Option 66/67/82, SSH, SNMP Inform, Modbus/
TCP, LLDP, IEEE 1588 PTP, IPv6
MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB,
Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9
Flow Control: IEEE 802.3x flow control, back pressure flow control
Switch Properties
Priority Queues: 4
Max. Number of Available VLANs: 64
VLAN ID Range: VID 1 to 4094
IGMP Groups: 256
MAC Table Size: 8 K
Packet Buffer Size: 2 Mbit
1
• QoS (IEEE 802.1p) and TOS/DiffServ to increase determinism
• Port Trunking for optimum bandwidth utilization
• SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network
security
• SNMPv1/v2c/v3 for different levels of network management
• RMON for efficient network monitoring and proactive capability
• Bandwidth management prevents unpredictable network status
• ABC-01 (Automatic Backup Configurator) for system configuration
backup
• Port mirroring for online debugging
• Automatic warning by exception through e-mail, relay output
Interface
Fiber Ports: 100BaseFX (SC/ST connector) and 1000BaseSFP slot
RJ45 Ports: 10/100BaseT(X) or 10/100/1000BaseT(X) auto
negotiation speed
Console Port: RS-232 (RJ45 connector)
LED Indicators: PWR1, PWR2, FAULT, 10/100M (TP port), 100M
(fiber port), MSTR/HEAD, CPLR/TAIL
Alarm Contact: 2 relay outputs with current carrying capacity of 1 A
@ 24 VDC
Digital Inputs: 2 inputs with the same ground, but electrically isolated
from the electronics.
• +13 to +30V for state “1”
• -30 to +3V for state “0”
• Max. input current: 8 mA
Optical Fiber
Wavelength
Max. TX
Min. TX
RX Sensitivity
Link Budget
Multi-mode
1300 nm
-10 dBm
-20 dBm
-32 dBm
12 dB
5 km a
4 km b
100BaseFX
Single-mode
Single-mode, 80 km
1310 nm
1550 nm
0 dBm
0 dBm
-5 dBm
-5 dBm
-34 dBm
-34 dBm
29 dB
29 dB
40 km c
80 km d
-6 dBm
-3 dBm
a. 50/125 μm, 800 MHz*km fiber optic cable
b. 62.5/125 μm, 500 MHz*km fiber optic cable
c. 9/125 μm single-mode fiber optic cable
d. 9/125 μm single-mode fiber optic cable (80 km)
-3 dBm
Typical Distance
Saturation
w w w. m o x a . c o m
info@moxa.com
Industrial Ethernet Solutions
Power Requirements
Regulatory Approvals
Input Voltage: 24 VDC (12 to 45 VDC), redundant dual inputs
Input Current:
EDS-518A: 0.51 A @ 24 V
EDS-518A-MM/SS: 0.61 A @ 24 V
Overload Current Protection: Present
Connection: 2 removable 6-contact terminal blocks
Reverse Polarity Protection: Present
Safety: UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1
Hazardous Location: UL/cUL Class I, Division 2, Groups A, B, C, and
D; ATEX Zone 2, Ex nC IIC
EMI: FCC Part 15, CISPR (EN55022) class A
EMS:
EN61000-4-2 (ESD), level 2; EN61000-4-3 (RS), level 3;
EN61000-4-4 (EFT), level 2; EN61000-4-5 (Surge), level 3;
EN61000-4-6 (CS), level 3; EN61000-4-8; EN61000-4-12
Maritime: DNV, GL
Shock: IEC 60068-2-27
Freefall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Physical Characteristics
Housing: Metal, IP30 protection
Dimensions: 94 x 135 x 142.7 mm (3.7 x 5.31 x 5.62 in)
Weight: 1630 g
Installation: DIN-Rail mounting, wall mounting (with optional kit)
Note: Please check Moxa’s website for the most up-to-date certification status.
Environmental Limits
MTBF (meantime between failures)
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Time: 240,000 hrs
Database: Telcordia (Bellcore), GB
Warranty
Warranty Period: 5 years
Details: See www.moxa.com/warranty
Dimensions
30.0 mm
(1.2 in) 36.9 mm
(1.5 in)
15.0 mm
(0.6 in)
71.0 mm (2.8 in)
0.8 mm
(0.0 in)
66.8 mm
(2.6 in)
9.0 mm (0.4 in)
13.4 mm
(0.5 in)
46.0 mm
(1.8 in)
48.3 mm
(1.9 in)
35.0 mm
(1.4 in)
135.0 mm (5.3 in)
70.0 mm (2.8 in)
7.8 mm
(0.3 in)
30.5 mm
(1.2 in)
7.8 mm
(0.3 in)
94.0 mm (3.7 in)
142.7 mm (5.6 in)
Side View
Front View
Rear View
DIN-Rail/Panel Mounting Kit
Ordering Information
Available Models
Standard Temperature
Wide Temperature
(0 to 60˚C)
(-40 to 75˚C)
Port Interface
Gigabit Ethernet
Fast Ethernet
100BaseFX
Combo Port,
10/100/1000BaseT(X)
10/100BaseT(X)
or 1000BaseSFP*
Multi-mode,
Multi-mode,
Single-mode,
Single-mode, SC
SC Connector
ST Connector
SC Connector
Connector, 80 km
EDS-518A
EDS-518A-T
2
16
–
–
–
–
EDS-518A-MM-SC
EDS-518A-MM-SC-T
2
14
2
–
–
–
EDS-518A-MM-ST
EDS-518A-MM-ST-T
2
14
–
2
–
–
EDS-518A-SS-SC
EDS-518A-SS-SC-T
2
14
–
–
2
–
EDS-518A-SS-SC-80
-
2
14
–
–
–
2
*The EDS-518A series supports 2 1000BaseSFP slots. See page 1-69 for SFP-1G series Gigabit Ethernet SFP module product information.
Optional Accessories (can be purchased separately)
MXview: Moxa industrial network management software with 50, 100, 250, or 500 nodes
EDS-SNMP OPC Server Pro: OPC server software that works with all SNMP devices
ABC-01: Configuration backup and restoration tool for managed Ethernet switches, 0 to 60°C operating temperature
DR-4524/75-24/120-24: 45/75/120 W DIN-Rail 24 VDC power supplies
MDR-40-24/60-24: 40/60 W DIN-Rail 24 VDC power supplies, -20 to 70°C operating temperature
WK-46: Wall mounting kit
RK-4U: 4U-high 19” rack mounting kit
2
w w w. m o x a . c o m
info@moxa.com
Industrial Ethernet Solutions
SFP-1G Series
1G-port Gigabit Ethernet SFP modules
››Compliant with IEEE 802.3z
››Differential LVPECL inputs and outputs
››TTL signal detect indicator
››Hot pluggable LC duplex connector
››Class 1 laser product, complies with EN60825-1
EN : 60825
Specifications
Interface
Ethernet Ports: 1
Connectors: Duplex LC Connector or Simplex LC Connector (WDM-type only)
Note: WDM-type SFP modules must be used in pairs (e.g., SFP-1GXXALC and SFP-1GXXBLC)
Optical Fiber
Gigabit Ethernet
SFP-SX SFP-LSX SFP-LX SFP-LH SFP-LHX SFP-ZX SFP-EZX SFP-EZX-120
Wavelength
850 nm
1310 nm
Max. TX
-4 dBm
-1 dBm
-3 dBm
Min. TX
-9.5 dBm
-9 dBm
RX
Sensitivity
-18 dBm
Link
Budget
1310 nm 1310 nm
SFP-10A
SFP-10B
SFP-20A
SFP-20B
SFP-40A
SFP-40B
TX 1310 nm, TX 1550 nm, TX 1310 nm, TX 1550 nm, TX 1310 nm, TX 1550 nm,
RX 1550 nm RX 1310 nm RX 1550 nm RX 1310 nm RX 1550 nm RX 1310 nm
1310 nm
1550 nm
1550 nm
1550 nm
-2 dBm
1 dBm
5 dBm
5 dBm
0 dBm
-3 dBm
-2 dBm
2 dBm
-9.5 dBm
-8 dBm
-4 dBm
0 dBm
0 dBm
-5 dBm
-9 dBm
-8 dBm
-3 dBm
-19 dBm
-20 dBm
-23 dBm
-24 dBm
-24 dBm
-30 dBm
-32 dBm
-21 dBm
-23 dBm
-23 dBm
8.5 dB
10 dB
10.5 dB
15 dB
20 dB
24 dB
30 dB
27 dB
12 dB
15 dB
20 dB
Typical
Distance
550 ma
2 kmb
10 kmc
30 kmc
40 kmc
80 kmc
110 kmc
120 kmc
10 kmc
20 kmc
40 kmc
Saturation
0 dBm
-3 dBm
-3 dBm
-3 dBm
-3 dBm
-3 dBm
-3 dBm
-8 dBm
-1 dBm
-1 dBm
-1 dBm
a. 50/125 μm, 400 MHz * km or 62.5/125 μm, 500 MHz * km @ 850 nm multi-mode fiber optic cable
b. 62.5/125 μm, 750 MHz * km @ 1310 nm multi-mode fiber optic cable
c. 9/125 μm single-mode fiber optic cable
Note: The actual communication distance depends on many factors, including connector loss, cable deployment, and the age of the cabling system. We recommend doing
a link budget analysis and reserving a 3 dB margin for such factors.
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Operating Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory Approvals
Safety: UL, TÜV
Warranty
Warranty Period: 3 years
Details: See www.moxa.com/warranty
3
w w w. m o x a . c o m
info@moxa.com
Industrial Ethernet Solutions
13.4 mm
(0.5 in)
Top View
13.4 mm
(0.5 in)
8.2 mm
(0.3 in)
8.4 mm
(0.3 in)
Side View
45.0 mm (1.8 in)
RX
TX
55.5 mm (2.2 in)
6.3 mm
(0.2 in)
56.6 mm (2.2 in)
13.7 mm
(0.5 in)
14.0 mm
(0.6 in)
Rear View
Ordering Information
SFP Modules
Available Models
Port Interface
Wide
Temperature
(-40 to 85˚C)
1000BaseSX,
LC Connector,
0.5 km
1000BaseLSX,
LC Connector,
2 km
1000BaseLX,
LC Connector,
10 km
1000BaseLH,
LC Connector,
30 km
1000BaseLHX,
LC Connector,
40 km
1000BaseZX,
LC Connector,
80 km
1000BaseEZX,
LC Connector,
110 km
1000BaseEZX,
LC Connector,
120 km
SFP-1GSXLC
SFP-1GSXLC-T*
1
–
–
–
–
–
–
–
SFP-1GLSXLC
SFP-1GLSXLC-T
–
1
–
–
–
–
–
–
SFP-1GLXLC
SFP-1GLXLC-T
–
–
1
–
–
–
–
–
SFP-1GLHLC
SFP-1GLHLC-T
–
–
–
1
–
–
–
–
SFP-1GLHXLC
SFP-1GLHXLC-T
–
–
–
–
1
–
–
–
SFP-1GZXLC
SFP-1GZXLC-T
–
–
–
–
–
1
–
–
SFP-1GEZXLC
–
–
–
–
–
–
–
1
–
SFP-1GEZXLC-120
–
–
–
–
–
–
–
–
1
Standard
Temperature
(0 to 60˚C)
* SFP-1GSXLC-T: -20 to 75˚C operating temperature
WDM-type (BiDi) SFP Modules
Availabe Models
Standard Temperature
(0 to 60˚C)
Wide Temperature
(-40 to 85˚C)
Port Interface
1000BaseSFP,
LC Connector, 10 km
1000BaseSFP,
LC Connector, 20 km
1000BaseSFP,
LC Connector, 40 km
TX 1310 nm,
RX 1550 nm
TX 1550 nm,
RX 1310 nm
TX 1310 nm,
RX 1550 nm
TX 1550 nm,
RX 1310 nm
TX 1310 nm,
RX 1550 nm
TX 1550 nm,
RX 1310 nm
SFP-1G10ALC
SFP-1G10ALC-T
1
–
–
–
–
–
SFP-1G10BLC
SFP-1G10BLC-T
–
1
–
–
–
–
SFP-1G20ALC
SFP-1G20ALC-T
–
–
1
–
–
–
SFP-1G20BLC
SFP-1G20BLC-T
–
–
–
1
–
–
SFP-1G40ALC
SFP-1G40ALC-T
–
–
–
–
1
–
The SFP-1G series modules can be used with the following products
EDS-728/828 series: IM-2GSFP series Gigabit Ethernet interface modules
EDS-611/619 series: 8+3G/16+3G-port compact modular managed Ethernet switches
EDS-G509 series: 9G-port full Gigabit managed Ethernet switches
EDS-518A series: 16+2G-port Gigabit managed Ethernet switches
EDS-510A series: 7+3G-port Gigabit managed Ethernet switches
EDS-P510 series: 7+3G-port Gigabit PoE managed Ethernet switches
IKS-6526-2GTXSFP series: 24+2G-port rackmount managed Ethernet switches
PT and IKS series: PM-7200-2G/4G series Gigabit Ethernet interface modules
EDS-G308 series: 8G-port full Gigabit unmanaged Ethernet switches
EDR-G903 series: Industrial Gigabit Firewall/VPN secure router
IMC-101G series: Industrial Gigabit media converters
4
© Moxa Inc. All Rights Reserved. Updated Sep. 27, 2010. Specifications subject to change without notice. Please visit our website for the most up-to-date product information.