Total Solutions for Industrial Device Networking
EDS-728/726 Series
24+4G- or 24+2G-Port Gigabit Modular Managed Ethernet Switch
Highlights
4 or 2 Gigabit plus 24 fast Ethernet ports for copper and fiber
Gigabit Turbo Ring and RSTP/STP (IEEE802.1W/D) for Ethernet
redundancy
QoS, IGMP snooping/GMRP, VLAN, LACP, SNMP V1/V2c/V3, RMON
supported
IEEE802.1X and https/SSL enhance network security
2006 iF Product Design Award (EDS-726)
ABC-01 (Automatic Backup Configurator) for system configuration
backup
High Performance Network Switching Technology
• Redundant Gigabit Ethernet Ring and RSTP/STP (IEEE802.1W/D)
• IGMP Snooping and GMRP for filtering multicast traffic from
industrial Ethernet Protocols
• Port-based VLAN, IEEE802.1Q VLAN and GVRP protocol to ease
network planning
• Compact-flash card for upgrading firmware and loading or saving
configurations (EDS-726 only)
• ABC-01 (Automatic Backup Configurator) for system configuration
backup
• Bandwidth management prevents unpredictable network status
• Lock port for only authorized MAC address access
• QoS-IEEE802.1p/1Q and TOS/DiffServ to increase determinism
• Port mirroring for online debugging
• 802.3ad, LACP for optimum bandwidth utilization
• Automatic warning by exception through email, relay output
• IEEE802.1X and https/SSL to enhance network security
• Digital inputs to integrate sensors and alarms with IP networks
• SNMP V1/V2c/V3 for different levels of network management
• Automatic recovery of connected device’s IP addresses
Designed for Industrial Applications
• Modular Managed Switch with up to 28/26 ports. Choose from the
following modules:
• For EDS-728:
- Two 2-port Gigabit modules, with 10/100/1000BaseT(X) (RJ45
connector), or 1000BaseSX/LX/LHX/ZX (LC connector)
• For EDS-726:
- Five 1-port Gigabit modules, with 10/100/1000BaseT(X) (RJ45
connector), or 1000BaseSX/LX/LHX/ZX (SC connector)
• For EDS-728/726:
- Eight 4-port fast Ethernet modules with a combination of
10/100BaseT(X) (RJ45 connectors) and 100BaseFX (Single/Multi
mode, SC/ST connectors)
• Line-swap fast recovery (Patented)
• Redundant, dual DC power inputs
• IP30, rugged high-strength case
• Long-haul transmit distance of 40 km or 80 km
• DIN-Rail or panel mounting capability
• Configurable by web browser, Telnet/Serial console, Windows utility,
CF (EDS-726 only), and ABC-01
EDS-728/726
• RMON for efficient network monitoring and proactive capability
Modular Managed Ethernet Switches
Features
1
• Send ping commands to identify network segment integrity
Recommended Software and Accessories
• ABC-01 RS-232 RJ45-based Automatic Backup Configurator
• EDS-SNMP OPC Server Pro
• DR series DIN-Rail 24 VDC power supplies
Introduction
Network planning is easy and flexible. The modular design lets you install
up to 4 Gigabit ports and 24 fast Ethernet ports. Choose from two 2-port
or five 1-port Gigabit modules, with copper or fiber optic connectors, and
eight 4-port Fast Ethernet modules with copper or fiber optic (SC/ST)
connectors. EDS-728/726 meets the demands of any industrial application,
and also leaves room for future expansion. EDS-728/726 is designed
with the user in mind. Features include a tilted LED display for convenient
viewing from any vertical angle, plug-able compact flash and ABC-01
(Automatic Backup Configurator) for configuration back-up, and redundant
intelligent network management. EDS-728/726 provides more flexibility,
reliability, and application-oriented functions to meet the demands of any
harsh industrial application.
w w w. m o x a . c o m
e - m a i l : i n f o @ m o x a . c om
1-11
Modular Managed Ethernet Switches
Specifications
Modular Managed Switch System, EDS-72810G/72610G
IM-4MSC:
7.2W
IM-4MST:
IM-4SSC:
7.2W
IM-1LSC/3TX:
IM-1GTX:
2.5W
IM-1GSXSC:
IM-1GLXSC:
1.5W
IM-1GLHXSC:
IM-1GZXSC:
1.5W
Connection: Two removable 6-pin terminal blocks
Overload Current Protection: Present
Reverse Polarity Protection: Present
Mechanical
1
Standards: IEEE802.3, 802.3u, 802.3ab, 802.3z, 802.3x, 802.1D,
802.1W, 802.1Q, 802.1p, 802.1X, 802.3ad
Protocols: IGMP V1/V2/V3 device, GMRP, GVRP, SNMP V1/V2c/V3,
DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP
, and RMON MIB: MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB,
RSTP MIB, RMON MIB Group 1,2,3,9
Flow Control: IEEE802.3x flow control, back pressure flow control
Modular Managed Ethernet Switches
Technology
Fast Ethernet: 6 slots for any combination of 4-port Interface Module
with 10/100BaseT(X) or 100BaseFX
Gigabit Ethernet:
For EDS-72810G: 2 slots for any combination of 2-port Interface Module
with 10/100/1000BaseT(X), 1000BaseSX/LX/LHX/ZX
(LC connector)
For EDS-72610G: 2 slots for any combination of 1-port Interface Module
with 10/100/1000BaseT(X), 1000BaseSX/LX/LHX/ZX
(SC connector)
Compact Flash Interface: 8M memory size at least (EDS-726 only)
Console: RS-232 (RJ45)
System LED Indicators: STAT, PWR1, PWR2, FAULT, MASTER,
COUPLER and CF (CF for EDS-726 only)
Module LED Indicators: LNK/ACT, FDX/HDX, RING PORT, COUPLER
PORT, SPEED
Alarm Contact: Two relay outputs with current carrying capacity of 1A
@ 24 VDC
Digital Inputs: Two inputs with the same ground, but electrically
isolated from the electronics
• +13 to +30V for state “1”
• -30 to +3V for state “0”
• Max. input current: 8 mA
Interface
Power
EDS-728/726
Input Voltage: 24 VDC (12 to 45 VDC), redundant dual inputs
Power Consumption:
EDS-72610G: 21.5W
IM-4TX:
2.5W
IM-2MSC/2TX: 5W
IM-2MST/2TX: 5W
IM-2SSC/2TX:
5W
Casing: IP30 protection
Dimensions (W x H x D): 362 x 146 x 128 mm
14.25 x 5.75 x 5.04 in.
Weight: 1950 g
Installation: DIN-Rail, Wall Mounting (optional kit)
Environmental
Operating Temperature: 0 to 60°C (32 to 140°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Regulatory Approvals
Safety: UL508, UL60950-1, CSA C22.2 No. 60950-1, EN60950-1 (Pending)
Hazardous location: UL/cUL Class I, Division 2, Groups A, B, C, and D, ATEX Class I, Zone
2, EEx nC IIC (Pending)
Maritime: DNV, GL (EDS-726 only)
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), level 3 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3
EN61000-4-8
EN61000-4-11
EN61000-4-12
Shock: IEC60068-2-27
Freefall: IEC60068-2-32
Vibration: IEC60068-2-6
MTBF: EDS-72610G:210,000 hrs
Database: MIL-HDBK-217F, GB 25˚C
*Please check MOXA’s website for the most up-to-date certification status.
Warranty
5 years
Gigabit Ethernet Interface Modules, IM-1G/2G series
IM-1GTX
IM-1GSXSC
IM-1GLXSC
IM-1GLHXSC
IM-1GZXSC
Interface
LED Indicators: Port status
RJ45 Ports: 10/100/1000BaseT(X) auto negotiation speed, and auto
MDI/MDI-X connection
Fiber Ports: EDS-72810G: 1000BaseSX/LX/LHX/ZX (LC Connector)
EDS-72610G: 1000BaseSX/LX/LHX/ZX (SC Connector)
Optical Fiber
Distance:
Multi mode:
1000BaseSX 0 to 500 m, 850 nm (50/125 µm, 400 MHz*km)
0 to 275 m, 850 nm (62.5/125 µm, 200 MHz*km)
1-12
7.2W
4W
1.5W
1.5W
IM-2GTX
IM-2GSFP
1000BaseLX 0 to 1100 m, 1310 nm (50/125 µm, 800 MHz*km)
0 to 550 m, 1310 nm (62.5/125 μm, 500 MHz*km)
Single mode:
1000BaseLX 0 to 10 km, 1310 nm (9/125 µm, 3.5 PS/(nm*km))
1000BaseLHX0 to 40 km, 1310 nm (9/125 µm, 3.5 PS/(nm*km))
1000BaseZX 0 to 80 km, 1550 nm (9/125 µm, 19 PS/(nm*km))
TX Output power: IM-1GSX
-9.5(Min.) to -4(Max.) dBm
IM-1GLX
-9.5(Min.) to -3(Max.) dBm
IM-1GLHX
-4(Min.) to +3(Max.) dBm
IM-1GLHX
0(Min.) to +5(Max.) dBm
SFP-1GSXLC
-9.5(Min.) to -4(Max.) dBm
w w w. m o x a . c o m
e - m a i l : i n f o @ m o x a.com
Total Solutions for Industrial Device Networking
SFP-1GLXLC
SFP-1GLHXLC
SFP-1GZXLC
RX Sensitivity: 1M-1GSX
1M-1GLX
1M-1GLHX
1M-1GZX
SFP-1GSXLC
SFP-1GLXLC
SFP-1GLHXLC
SFP-1GZXLC -9.5(Min.) to -3(Max.) dBm
-4(Min.) to +1(Max.) dBm 0(Min.) to +5(Max.) dBm
0 to -18 dB
-3 to -20 dB
-3 to -23 dB
-3 to -23 dB 0 to -18 dBm -3 to -20 dBm
-3 to -24 dBm
-3 to -24 dBm
Mechanical
Weight: IM-1GTX:
IM-1GSXSC:
IM-1GLXSC:
IM-1GLHXSC:
IM-1GZXSC:
130 g
135 g
135 g
140 g 140 g MTBF
IM-1G series:710,000 hrs
Database: MIL-HDBK-217F, GB 25˚C
Dimensions (W x H x D):24 x 66 x 101 mm
0.94 x 2.60 x 3.98 in.
Fast Ethernet Interface Modules, IM series
1
IM-2MSC/2TX
IM-2SSC/2TX
IM-2MST/2TX
Interface
IM-1LSC/3TX
IM-4MST
IM-4MSC
IM-4SSC
RX Sensitivity: -34 to -30 dBm (Multi), -36 to -32 dBm (Single)
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, F/H duplex mode,
and auto MDI/MDI-X connection
Fiber Ports: 100BaseFX ports (SC/ST connector)
LED Indicators: PWR, P1, P2, P3, P4 port status
Optical Fiber
Distance:
Multi mode: 0 to 5 km, 1300 nm (50/125 µm, 800 MHz*km)
0 to 4 km, 1300 nm (62.5/125 µm, 500 MHz*km)
Single mode: 0 to 40 km, 1310 nm (9/125 µm, 3.5 PS/(nm*km)) 0 to 80 km, 1550 nm (9/125 µm, 19 PS/(nm*km))
Min. TX Output:
Multi mode: -20 dBm
Single mode: 0 to 40 km, -5 dBm; 0 to 80 km, -5 dBm
Max. TX Output:
Multi mode: -14 dBm
Single mode: 0 to 40 km, 0 dBm; 0 to 80 km, 0 dBm
Mechanical
Casing: IP30 protection
Dimensions (W x H x D): 40 x 130 x 100 mm 1.54 x 5.12 x 3.94 in.
Weight (Gross Weight): IM-4TX
215 g
IM-2MSC/2TX
245 g
IM-2MST/2TX
250 g
IM-2SSC/2TX
245 g
IM-1LSC/3TX
235 g
IM-4MSC
250 g
IM-4MST
270 g
IM-4SSC
270 g
MTBF
620,000 hrs
Database: MIL-HDBK-217F, GB 25˚C
[ EDS-728/726 ]
Gigabit Ethernet
Interface Modules
Front View
Side View
Front View
EDS-728/726
Dimensions (unit = mm)
Modular Managed Ethernet Switches
IM-4TX
Side View
Fast Ethernet Interface Modules
Rear View
Front View
Side View
w w w. m o x a . c o m
Rear View
e - m a i l : i n f o @ m o x a . c om
1-13
Modular Managed Ethernet Switches
Ordering Information
EDS-72810G/72610G Modular Switch System
Modular Managed Switch System with 6 slots for 4-port 100 Mbps modules and 2 slots for 2- or 1-port Gbps ports, up to 24+4G or 24+2G ports.
Gigabit Ethernet Modules for EDS-728/726, IM-1G/2G Series
IM-AGBBBCC
1
Ordering Code
Definition
Available Models
Modular Managed Ethernet Switches
Number of Ports
Copper/Fiber Ports
FO Connector
1: One copper or fiber port
2: two copper or fiber ports
TX: 10/100/1000BaseT(X) port
SX: 1000BaseSX port, 0.5 km
LX: 1000BaseLX port, 10 km
LHX: 1000BaseLHX port, 40 km
ZX: 1000BaseZX port, 80 km
SFP: 1000Base SX/LX/LHX/ZX port
SC: SC Connector
Standard:
For EDS-728:
• IM-2GTX
• IM-2GSFP
Long-Haul (40 km):
For EDS-726:
• IM-1GLHXSC
Long-Haul (80 km):
For EDS-726:
• IM-1GZXSC
For EDS-726:
• IM-1GTX
• IM-1GSXSC
• IM-1GLXSC
* IM-2GSFP Gigabit Ethernet Module support two SFP slots, please refer to Page 2-10 to select needed SFP-1G series
Gigabit Ethernet Modules for your own application.
Fast Ethernet Modules for EDS-728/726, IM Series
IM-ABBCC/DEE
Ordering Code
Definition
EDS-728/726
Available Models
Number of Ports
Copper/Fiber Ports
FO Connector
Number of Remaining Ports
Type of Remaining Ports
4: Four ports
2: Two ports
1: One port
TX: 10/100BaseT(X) port
M: Multi mode,
100BaseFX port
S: Single mode,100BaseFX
port, 40 km
L: Single mode,100BaseFX
port, 80 km
SC: SC connector
ST: ST connector
- : None
2: Two ports
3: Three ports
TX: 10/100BaseT(X) port
Standard:
• IM-4TX
• IM-4MSC
• IM-4MST
• IM-2MSC/2TX
• IM-2MST/2TX
• IM-4SSC
• IM-2SSC/2TX
Long-Haul (80 km):
• IM-1LSC/3TX
Optional Accessories
• ABC-01: Industrial RS-232, RJ45-based, Automatic Backup Configurator
• DR-4524: 45W/2A DIN-Rail 24 VDC Power Supply, 85 to 264 VAC input
• DR-75-24: 75W/3.2A DIN-Rail 24 VDC Power Supply, 85 to 264 VAC input
• DR-120-24: 120W/5A DIN-Rail 24 VDC Power Supply, 88 to 132 VAC/176 to 264 VAC input by switch
• EDS-SNMP OPC Server Pro: CD with EDS-SNMP OPC Server software and manual
• WK-32: Wall Mounting Kit for EDS-800/700 series
1-14
w w w. m o x a . c o m
e - m a i l : i n f o @ m o x a.com