TECHCONNECT DIGITAL AMPLIFIER2
REMOTE CONTROL
ZERO ENERGY CONSUMPTION
Full-feature remote control
is included with receivers
positioned on the front for
normal use, and on the
rear for integration with a
control system such as the
Techconnect
Control2.
Uses no power at all unless it is actually
amplifying program. Even on at full
volume, unless it is receiving input it is
effectively off. 2 X 20W (RMS @ 8 OHMS)
Massive power output is provided by the
latest low impedance Texas Instruments™
digital amplifier chip. Can drive up to four
speakers with ease.
LED DISPLAY
EXTERNAL POWER SUPPLY
Clear display and a simple soft-control
interface which gives instant access to
controls. Flexible positioning of the control
interface makes this easier to install and
use than powered speakers.
Laptop-style power supply with 3m DC
tail which can be shortened means easy
routing of power cable through trunking.
Velcro is included for fixing the power
supply in place, or a blank surround is
available to hide it in a standard doublegang UK backbox.
Two Inputs are wired into the rear via
phoenix connectors. Input 1 is duplicated
on the front panel with a minijack
connector for convenience. This halfnormalled input disconnects the rear input
while in use.
RUNS COLD
Digital technology allows the amp to
squeeze into a Techconnect module.
Analogue amps produce heat as a
byproduct which limits the minimum size
of the amplifier. Digital amps run cold so
no bulky heatsink necessary.
“
CABLES AND BACKBOX INCLUDED
Comes with input and speaker cables,
plus a single-gang Techconnect surround
and backbox. Can alternately be
integrated into a doublegang Techconnect
AV faceplate with other input/output
modules.
WALL MOUNTED & SECURE
No furniture is required it is much less
obvious as a target for theft. Perfect
for training rooms, boardrooms, and
classrooms.
ASK DAVE...
If you have any questions just ask Dave. He’s an
installer just like you and he’ll be happy to help.
Go to www.visionaudiovisual.com/askdave
installation:innovation
“
INPUTS FRONT & REAR
www.visionaudiovisual.com
TECHCONNECT DIGITAL AMPLIFIER2
SPECIFICATIONS
AMPLIFIER DIMENSIONS
42 x 71 x 40mm
CARTON DIMENSIONS
230 x 100 x 63mm
AMPLIFIER WEIGHT
63 grams
PACKAGED WEIGHT
1.1kg
COLOUR
White
INPUTS
2 x Stereo inputs
TECHNICAL DETAILS
2 x 20w @ 8 ohms
Total Harmonic Distortion less than or equal to 1% (20Hz~22kHz)
Frequency response (line in): 80Hz~22kHz(±2dB)
Signal to noise ratio (line in): more than or equal to 98dB (A-weighted)
Rating input level/impedance: Line in 500mV/50k?
Power Supply 100-240vAC 50/60Hz, Max 1A, DC Output 12V 4A, DC Cable 3m
Power consumption (rating condition): less than or equal to 40W
ACCESSORIES INCLUDED
1 x Single-gang Backbox
1 x Single-gang Surround
2 x 150mm input cables
2 x Unshielded Speaker cable 5m long
1 x Euro Figure-8 Power cable 2m long
1 x UK Figure-8 Power cable 2m long
1 x IR Remote Control (with 3V Lithium CR2025 battery)
POWER SUPPLY
100/230V External Laptop-style Power Supply
PALLET QUANTITY: 400
WARRANTY: 2-year return to base
COMPLIANCE: RoHS, WEEE & CE Compliant
ORDER PART CODE
TC2-AMP2 [SAP:1872510]
or TC2-AMP2 +SP-1300B bundle [SAP:1703068]
or TC2-AMP2 +SP-1300W bundle [SAP: 1703069]
or TC2-AMP2 +CS-1300 bundle [SAP: 1703070]
Optional Power Supply: TC2 CTL2PWR 1872512
installation:innovation
www.visionaudiovisual.com