LCD PUBLIC DISPLAY Slim Eye-catching Bezel

Specifications
698
934
76 122
47
1202
116
659
Dimension
66
45
559
LCD PUBLIC DISPLAY
527
966
1163
(Unit:mm)
Orientation
Landscape / Portrait
42” (1067mm)
0.485mm
1920 x 1080dots (Full HD)
1.0 Billion
700cd/m2
1100 : 1
Up and Down 178°, Left and Right 178°
9ms (Gray to Gray)
930mm x 523mm / 36.6” x 20.6”
VESA DPM
VESA DDC2B, DDC/CI
Yes (Contrast / Position / Phase / Clock)
Brightness, Contrast, Auto Brightness, Zoom, PIP, Screen saver,
Side border color, Gamma selection, Black level expansion,
Heat status, Power on delay, Schedule, Tiling, etc.
Diagonal (inch)
Pixel Pitch
Resolutions
Colour
Brightness (typ.)
Contrast ratio
Viewing Angle (CR>=10)
Response Time
LCD Module
Viewable Size
Power Management
Plug and Play
Auto adjustment
OSD user function
PC Input /
Output
Input Connector (Analog)
Mini D-sub 15Pin , BNC (R, G, B, H, V) (PC/AV common)
Mini D-sub 15Pin , BNC (R, G, B, H, V) (PC/AV common)
(Digital)
HDMI (PC/AV common), DVI-D (PC/AV common), DisplayPort
HDMI (PC/AV common), DVI-D (PC/AV common)
Output Connector
Mini D-sub 15Pin
Mini D-sub 15Pin
CAT5-Input
(Option)Modular 8 pinx1 providing RGB differential video and RS-485 control support. Modular 8 pin x1 providing RGB differential video and RS-485 control support.
CAT5-Output
(Option)Modular 8 pinx1 providing RGB differential video and RS-485 control support. Modular 8 pin x1 providing RGB differential video and RS-485 control support.
Horizontal Frequency
15.625 / 15.734, 31.5 - 91.1kHz
15.625 / 15.734, 31.5 - 91.1kHz
Vertical Frequency
50.0 / 58.0 - 85.0Hz
50.0 / 58.0 - 85.0Hz
Video Signal
Analog: Analog RGB, Digital: TMDS (with HDCP)
Analog: Analog RGB, Digital: TMDS (with HDCP)
Sync Signal
Analog: Separate (TTL ), Composite (0.3V) , Sync on Green, Digital: TMDS Analog: Separate (TTL ), Composite (0.3V) , Sync on Green, Digital: TMDS
Supported Resolution
Input / Output
signal
Input Connector (Analog)
AV Input /
Output
(Digital)
Output Connector
Supported Resolution
Input Connector (Analog)
(Digital)
Output Connector
Speaker / Audio Output
Control Input / Input Connector
Output
Output Connector
Input Voltage
Power Consumption
AUDIO Input /
Output
Power Supply
Operational
Environment
Dimension
(WxHxD)
Weight
(Unit:mm)
Landscape / Portrait / Face up
52” (1322mm)
0.600mm
1920 x 1080dots (Full HD)
16.7 Million
700cd/m2
2000 : 1
Up and Down 178°, Left and Right 178°
8ms (Gray to Gray)
1152mm x 648mm / 45.4” x 25.5”
VESA DPM
VESA DDC2B, DDC/CI
Yes (Contrast / Position / Phase / Clock)
Brightness, Contrast, Auto-Brightness, Zoom, PIP, Screen saver,
Side border color, Gamma selection, Black level expansion,
Heat status, Power on delay, Schedule, Tiling, CAT5 Control, etc.
Power Consumption at
Power Saving
Temperature
Humidity
Net with stand
Net without stand
Gross
Net with stand
Net without stand
Gross
Wall mounting interface
Complied regulatory and guidelines
640x480, 800x600, 1024x768, 1360x768,
1280x1024, 1600x1200 (Compressed/Simplified),
1920x1080, 1920x1200 (Compressed/Simplified)
640x480, 800x600, 1024x768, 1280x768, 1360x768,
1280x1024, 1600x1200 (Compressed/Simplified),
1920x1080, 1920x1200 (Compressed/Simplified)
Composite <BNC/RCA>, Separate (Y/C)<S-TERMINAL>,
Component (Y/Pb/Pr) <BNC> (PC/AV common)
HDMI (PC/AV common), DVI-D (PC/AV common)
Analog: Composite<BNC>
Composite/Separate: NTSC, PAL, SECAM, 4.43NTSC, PAL60
Component/Digital:480i,480p,576i,576p,720p,1080i,1080p
RCA pin-jack L/R x 2, Stereo mini jack
HDMI (digital audio )
RCA pin-jack L/R
External Speaker jack, 7W + 7W (8 ohm)
RS-232C<Mini D-sub 9Pin>
RS-232C<Mini D-sub 9Pin>
AC100 - 240V, 50/60Hz
232W (214W without speaker)
Less than 5W (with CAT5 (Option) input select)
Less than 3W (with other input select)
Mechanical Power SW Off : 0W
5 to 40°C/ 41 to 104 °F (Landscape Mode),
5 to 35°C / 41 to 95°F (Portrait Mode)
20 - 80% (without condensation)
—
966mm (W) x 559mm (H) x 116mm (D) / 38.0”(W) x 22.0”(H) x 4.6”(D)
1130mm (W) x 709mm (H) x 280mm (D) / 44.5”(W) x 28.0”(H) x 11.0”(D)
—
Approximately 24kg / 52lbs
Approximately 31kg / 68lbs
12 Holes (100mm/3.94" pitches) for Monitor mount
Composite <BNC/RCA>, Separate (Y/C)<S-TERMINAL>,
Component (Y/Pb/Pr) <BNC> (PC/AV common)
HDMI (PC/AV common), DVI-D (PC/AV common)
Analog: Composite<BNC>
Composite/Separate: NTSC, PAL, SECAM, 4.43NTSC, PAL60
Component/Digital:480i,480p,576i,576p,720p,1080i,1080p
RCA pin-jack L/R x 2, Stereo mini jack
HDMI (digital audio )
RCA pin-jack L/R
External Speaker jack, 7W + 7W (8 ohm)
RS-232C<Mini D-sub 9Pin>
RS-232C<Mini D-sub 9Pin>
AC100 - 240V, 50/60Hz
380W (360W without speaker)
Less than 5W (with CAT5 input select)
Less than 3W (with other input select)
Mechanical Power SW Off : 0W
5 to 40°C/ 41 to 104 °F (Landscape Mode),
5 to 35°C / 41 to 95°F (Portrait Mode / Face up Mode)
20 - 80% (without condensation)
—
1202mm (W) x 698mm (H) x 122mm (D) / 47.3”(W) x 27.5”(H) x 4.8”(D)
1405mm (W) x 951mm (H) x 275mm (D) / 55.3”(W) x 37.4”(H) x 10.8”(D)
—
Approximately 40kg / 88lbs
Approximately 49kg/108lbs
8 Holes (200mm/7.87" pitches) for Monitor mount
4 Holes x 2sets (100mm/3.94” pitches) for SBC/Signage player mount on monitor
UL60950-1/C-UL/CE Marking/BSMI/GOST-R/FCC-B/DOC-B/C-Tick/RoHS/
US Mercury/CCC only for Chinese model
UL60950-1/C-UL/CE Marking/BSMI/GOST-R/FCC-B/DOC-B/C-Tick/RoHS/
US Mercury/CCC only for Chinese model
Power Cord, VGA (Mini-Dsub15p) Cable, User’s Manual,
Wireless Remote Controller, Battery, Clamper, Screw for Clamper
Accessories
Optional Stereo Speakers
Power Cord, VGA (Mini-Dsub15p) Cable, User’s Manual, Wireless Remote Controller,
Battery, Clamper, Screw for Clamper, CAT5 Tx Box, CD-ROM
Optional Stand
Optional Silver Bezel
ST-421S/ST-521S
OB-421S-AS/OB-521S-AS
Optional Cat5 Kit
for MDT421S
Transmitter
SP-421S/SP-521S
Slim Eye-catching Bezel Design
Advanced High-definition Digital Signage Display
Receiver
DP-1CA5
■
■
■
■
■
All information contained herein may be changed without prior notice.
HDMI,
and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
is a trademark of the Video Electronics Standards Association, registered in the U.S. and other countries.
Other brand, product, and service names are trademarks or registered trademarks of the respective companies.
Products and services in this brochure do not imply that Mitsubishi Electric Corporation intends to have them available
in all countries where Mitsubishi Electric Corporation and its subsidiaries operate.
■ Photographs are simulated images.
L-S20-9-C8293-B HQ-0907 Printed in Japan(MDOC)
Revised publication, effective Jul. 2009.
Superseding publication L-S20-9-C8293-A Mar. 2009
Specifications subject to change without notice.
Highly Aesthetic Innovative Design Durable Full High-definition Panel Superior Functionality
Large-format LCD engineered specifically for public display use
Photographs are simulated images.
Photographs are simulated images.
1
2
Stylish slim aluminum bezel design complements
any public space
Latest LCD panel technologies achieve improved performance
and extended use in public display and industrial applications
Full 1920 X 1080
High-definition Resolution
700cd/m2 High Brightness /
2000 :1* High Contrast
MDT series panels reproduce images from video and computer signals
with precision and clarity, all delivered in full 1920 x 1080 high-definition
resolution. A high-durability panel reduces the risk of image persistence in
commercial applications.
Brightness and contrast functions designed to deliver truly impressive
sharp, vivid images and information even in well-lit public spaces.
*MDT521S
Video and Serial Control over CAT5
Enables long video cable connections and serial control over a single CAT5 cable
Supports Long Cable Lengths–
Up to 150 metres
Link Up to 5 Displays in Series using
CAT5 Connections
Long VGA cables can lead to a loss in image quality and higher installation
costs. The MDT521S comes standard with a CAT5 transmitter and built-in
CAT5 receiver that enable the connection of much longer cables without
degrading the high picture quality. The MDT421S is equipped with a CAT5
receiver slot for the optional CAT5 receiver and transmitter kit.
Use the daisy chain connection function of the CAT5 receiver and output
terminal to link up to five displays in series via CAT5 cables.
1
in
2
3
out in
out in
CAT5 Tx
Box
4
out in
5
out in
CAT5 Cable (RGB & RS-485)
200m
Allowable cable length
Connection
Max. cable length
Signal timing
One monitor
150m
1920x1080@60Hz
Multiple monitors
200m(*)
1920x1080@60Hz
* Total length of the connected cables.
* The connectable cable length depends on signal source and quality.
CAT5 Image Quality Correction Tools
Various features have been incorporated to prevent the degradation of
image quality over long cable lengths.
Slim aluminum bezel with
black hairline finish.
Diamond-cut edges and finely finished
grooves express premium quality and
a slim, ergonomic appearance.
*MDT421S: Slot for Optional CAT5 receiver
Video and Serial-control
Signals over a Single CAT5 Cable
1) Cable Length Selector
Utilizing the CAT5 transmitter box, video and
RS-485 serial-control signals can be delivered
over the same CAT5 cable, eliminating the need
for a separate serial-control cable.
Innovative design with enhanced
functionality.
Changes to optimised default settings for cable lengths.
2) Equalizer Function
Optimises signal shape to minimize image blur on the screen.
3) R/G/B Gain Adjustment
Brightens dark images.
Monitor for
Image Verification
Silver bezel available as
an option.
RGB
RS232C
PC
3
* MDT521S
4) R/G/B Skew Compensation
150m
Corrects colour deviation.
in
CAT5 Tx
Box
CAT5 Cable
(RGB & RS-485)
* CAT5 connectors can only be connected to the CAT5 transmitter box included with the
MDT521S or available as an option with MDT421S. Do not attempt to connect any other network hardware. This may result in damage to the hardware connected, transmitter box and
displays.
4
Latest image reproduction and information-processing technol ogies
in a conveniently thin eye-catching package
Automatic Brightness Control with Front/Rear Ambient Light Sensors –
Unique innovation from Mitsubishi Electric
Adjust colour temperature across a
wide range from 3,000~10,000K. This
is an important function for signage
displays used in broadcasting, retail
food and other industries where
image reproduction in true colours
and tones is vital.
The MDT421S/521S are equipped with an Auto Brightness function that utilizes two ambient
light sensors—one each in the front and rear—to gather data on lighting conditions for
adjusting image brightness. Even when installed at venues where light conditions change
continuously, optimum viewing is ensured together with the added benefit of greater energy
savings through reduced power consumption in darker environments.
Well-lit environment
(brightness increased)
Normal environment
Color Matching for Multi-screen Applications
( available as a service option only )
Wide-range Colour Temperature Adjustment
Dark environment
(brightness reduced)
Qualified service personnel utilize proprietary colour calibration software and a designated colour sensor to adjust the
white-point and brightness levels to match adjacent panels.
* This service is not available in all countries and regions. Please check
availability with dealerships in your region.
NEWS
6-axis Colour Adjustment Function
Using the remote controller it is possible to choose a specific colour from
R, G, B, C, M or Y and adjust its hue and saturation independently. This is
especially useful for adjusting the colours of specific parts in digital posters,
or company or brand logos in signage applications.
Hue Adjustment
Saturation Adjustment
PiP, PoP and Side-by-side
Picture-in-Picture and Picture-out-of-Picture modes are provided,
enabling content from a video input source to be displayed in window
format while displaying the main image from the computer input source
or vice versa.
Side-by-side mode is incorporated as well, an ideal feature for broadcasting and video-conferencing applications.
Structural Design Enables In-floor/Face-up*
Installation - Applications expanded beyond
landscape and portrait
*Only for MDT521S.
Standard VESA Mount Pattern and
Left/Right Panel Holes for SBC
Display orientation is a key factor for the presentation and appearance of
digital signage. Advanced design technologies allow maximum flexibility in
the positioning of the MDT521S, from landscape, portrait and angled to
full-flat (face-up*) installations.
Standard VESA hole pattern (M8/400x400mm) for mounting to wall/
ceiling. SBC/media player mounting holes (100x100mm) provided on both
right and left sides for expanded
installation possibilities and improved user convenience.
* Run internal cooling fan full-time
when using monitor in face-up position.
Face-down/upside-down installation
not supported.
Conventional Adjustment
6-axis Colour Adjustment
The MDT421S is also equipped with the DisplayPort terminal,
a next-generation digital interface designed to enable
maximum display performance and deliver video and other
signals over a single cable up to 15 meters in length.
* MDT521S
Independent colour adjustment possible
Affects other colours
Up to seven different scheduled intervals by time, day of week and input
port can be programmed. Content from different sources can be scheduled for specific displays within
the same installation. This contributes to extending panel service
life and increasing energy savings
by turning off displays at times
when not required.
Multiple Standard Input and Output Connectors
- Brightness mode: Reduces maximum display brightness.
- Motion mode: Slightly shifts images
in four directions according to
user-specified time intervals.
In addition to the dedicated CAT5 connectors, the MDT421S/521S are equipped with a variety of industry-standard I/O connectors for computers, media players and other equipments. Compatibility for utilizing most common signal sources is ensured.
Tiling Capability with Frame Compensation
Combine up to 25 panels (5 wide x 5 high) to create a single large image (i.e.,
video wall) or other high-impact signage. A frame compensation function is
incorporated to adjust for the width
of panel bezels so that images are
displayed with the utmost accuracy.
Multi-level Screen Saver Function
To reduce image persistence and maximise panel service life in demanding signage applications, The MDT421S/521S are equipped with four
levels of screen saver function. Each level can be set to meet specific
application requirements.
MDT421S
MDT521S
MDT421S
(OUT)
1
2
(IN)
6
7
8
14
9
10
11
13
12
(OUT)
3
MDT521S
(IN)
Connect up to a maximum of 25 panels (5 x 5)
4
(OUT)
(IN)
(IN)
(IN)
- Gamma mode: Optimises the gamma curve.
Cooling fan mode: Fan operates continuously rather than automatically
activate when internal temperature reaches the pre-designated limit.
5
Side by Side
Enhanced Connectivity with
DisplayPort Terminal
* Photos are simulated images.
The ability to adjust colours independently depends on the contents.
Programmable Scheduling Function
PoP
PiP
5
Frame Compensation off
Frame Compensation on
1
CAT5 input/output connectors
(modular connector 8pin)
2
Slot for Optional CAT5 Receiver
3
EXTERNAL CONTROL
(mini D-Sub 9 pin)
4
VIDEO IN/OUT
7
EXTERNAL SPEAKER TERMINAL
11
RGB 2 IN (DVI-D)
VIDEO IN connector (BNC and RCA)
VIDEO OUT connector (BNC)
S-VIDEO IN connector (MINI DIN 4 pin)
8
AUDIO OUT
12
RGB 3 IN (mini D-Sub 15 pin)
9
AUDIO IN 1, 2, 3
13
RGB OUT (mini D-Sub 15 pin)
10
RGB 1 IN (HDMI)
14
RGB 6 IN (DisplayPort)
5
RGB 4 IN / DVD/HD IN (BNC)
6
AC IN connector
6