How to create System Image Backup in Windows 10 and restore

How to create System Image Backup in Windows 10
and restore your computer from backup?
A. Create a full image backup in Windows 10
Select the
Start button, then select Settings > Update & security > Backup >
Go Backup and Restore (Windows 7)
Select Create a System Image backup.
III. Connect an external USB hard drive with enough free space and select on a
hard disk where the USB hard drive is, and then click Next to continue.
Notice: the hard drive format should be NTFS.
IV. Confirm your backup settings and click the Start backup button.
The time to complete the Windows 10 backup will depend on your hardware
and data
VI. Finished
B. Use a system image you created earlier to recover your
I. Connect the drive with the system image backup you created earlier.
II. Reboot your computer with the Windows installation media (bootable USB flash
drive or bootable DVD).
* If you need to create installation media on USB drive, please check the Link:
III. During the Windows Setup, click Next.
IV. Click the Repair your computer in the bottom-left corner of the screen.
V. Click on Troubleshoot
VI. Click Advanced options
VII. Select System Image Recovery.
VIII. Select Windows 10.
IX. Click Next.
X. Click Next to continue.
XI. Click Finish.
XII. Click Yes.
XIII. Wait to finish.
XIV. Remove your Windows installation USB drive and then click Restart now.
* After system power on and monitor display a logo, please press DEL to enter BIOS
configuration and go to the configuration of "Boot Option #1" in boot menu, than set
hard disk as the first booting device.
Download PDF
Similar pages