datasheet cProcessor CP505 ATSC Processor The CP505 ATSC Processor offers flexible ASI, SMPTE 310M and IP network adaptation and advanced transport stream processing in a user friendly and compact solution. Applications •• Network adaptation and interface conversion between IP, ASI, SMPTE 310 and optional SONET/ SDH •• Dynamic PSIP generation based on a PMCP XML file from EPG providers The CP505 ATSC Processor provides powerful adaptation of MPEG-2 Transport Streams for the ATSC broadcast market. It performs interface adaptation for studio to transmitter links in a flexible and easy way. •• PSIP rebranding at transmitter sites (regional VCT adaptation) •• PID and service filtering with automatic PSI/PSIP/SI updates •• Insertion of PSI/PSIP/SI service information from The CP505 is a cost-effective solution for regional service adaptation operating stand-alone with very low power consumption. The PSIP handling features ensures easy generation, regeneration, ingestion or editing of PSIP data simplifying workflow and saving costs and equipment. PSI/PSIP/SI generators and service providers •• Output diversity for increased reliability including unicast, multicast and multicast to unicast conversion Key features •• Flexible transport stream interfacing and adaptation Nevion cProcessors can be configured via an •• Flexible transport stream processing easy-to-use web interface, which also offers •• Powerful PSI/SI/PSIP handling extensive built-in stream monitoring. Scheduled software upgrades can be performed via Connect, VideoIPath, or any NMS. •• Transport stream monitoring •• Input redundancy •• User-friendly configuration and control •• Compact, cost-effective solutions with 2 units in 1RU CP505 ATSC Processor Inputs TS processing module ASI/SMPTE 310 in • Service filtering • PID filtering/remapping • PSI/SI/PSIP handling • Input stream monitoring IP in nevion.com Timing Rate control Outputs ASI/SMPTE310 out (1 - 4 copies) IP out (1 - 8 copies) ASI/IP SDH EPG Management & Alarms HTML XML SNMP TXP Alarm relay PSI/SI/PSIP • Download/Generation • Ingest • Editor • PMCP Clock & time base Power • 230V AC • 48V DC Configuration Alarm logs Alarm traps Format conversion Transport stream monitoring Flexible input and output interfaces facilitate the In order to ensure error free processing, CP505 interface adaptation and format conversion monitors the input streams according to TR 101 290 between SMPTE 310M, ASI and IP directly on the priority 1. In case of errors in the input streams, alarms CP505 simplifying the studio to transmitter link are raised to inform the operator and traps are adaptation. forwarded to the NMS. Dynamic PSIP generation Input redundancy To resolve the challenges of updating the program Reliability of the system can be increased using guide the CP505 ATSC Processor supports the Automatic Input Switching features. This input Programming Metadata Communication Protocol redundancy feature allows the unit to switch (PMCP) described in the ATSC A76/B. Based on a between redundant inputs (ASI and/or IP) based on PMCP XML file the CP505 generates sectioned TS TR101 290 pri1 alarms. packets containing PSIP tables and multiplexes these packets into the stream. Transport stream over IP The output transport stream is encapsulated PSIP rebranding according to SMPTE 2022-2 including the handling Broadcasters can rebrand information in the VCT of FEC. (SMPTE 2022-1). The CP505 supports multiple table such as the major and minor channel number VLANs (IEEE 802.1Q), IP QoS and VLAN CoS/802.1P for by overriding existing VCT configuration on the fly. per-flow traffic prioritization. This operation requires minimum manipulations on the unit and can be achieved with only a few mouse clicks. PSIP Editor SI/PSIP tables can be edited directly using the built-in PSIP editor on the CP505 TS Adapter. The operator can modify, add or remove tables and service descriptors from the transport stream saving the costs of an external PSI/SI editing system. User-friendly configuration The user interface of the CP505 is simple and very intuitive, it is designed to help the operator configure the unit quickly. Running on any web browser the GUI can be accessed from any computer. CP505 ATSC Processor nevion.com Transport stream interfaces Management & control DVB-ASI 1-6 DVB ASI EN 50083-9, Annex B ( 2 inputs/ 4 output copies) Bit rate: 0.1 - 213 Mbit/s 188 or 204 byte packet length Burst and Spread mode Female BNC connectors 75 Ohm Management port 1 - 6 SMPTE 310M-2004 (2 inputs/ 4 output copies) 188 bytes packet length 19.39265 Mbit/s, ±2.8 ppm Female BNC connectors 75 Ohm Protocols HTTP, XML, SNMPv2c Alarm relay 9 pin D-SUB. Two relays supported; one at configurable alarm level Maintenance port USB version 1.1 SMPTE 310M Gigabit Ethernet: 2 x 100/1000Base-T Ethernet, 1 x SFP Connectors: 2 x RJ45 (100/1000Base-T), SFP TS Encapsulation: SMPTE 2022 -1/2 Forward Error Correction (FEC): SMPTE 2022-1 Protocols: IEEE 802.3 Ethernet, VLAN (802.1Q) ARP, IPv4, UDP, TCP, RTP, IGMPv2/3 Element control through HTTP/WEB based GUI XML Configuration import and export via HTTP SNMP agent for integration with Network Management System (NMS) Physical and environmental characteristics Input voltage Up to eight output copies on IP FEC insertion Variable matrix size for each output copy Unicast to Multicast conversion Format conversion ASI to IP, IP to ASI ASI to SMPTE310, SMPTE310 to ASI SMPTE310 to IP, IP to SMPTE310 Dimensions 1RU, ½-width 19’’ (WxDxH) 210 x 300 x 44.5mm Operating temperature 0˚C to 50˚C Storage temperature -20˚C to 70˚C Relative humidity 5% to 95% (non condensing) Compliance CE: 73/23/EEC (Low voltage equipment) 89/336/EEC (Electromagnetic compatibility) CSA: Designed for CSA approval Safety: IEC60950 and EN60950 EMC: EN55022, EN55024, EN6100-3-2 Transport stream processing (optional) TS Multiplexing Rate adaptation (add/remove “null” packets) PID and service filtering and remapping Service component routing based on PID or component tag PSI/SI/PSIP handling Automatic table regeneration PSIP/PSI/SI download and playout Dynamic PSIP from PMCP file (A/76B) Create PSIP with built-in PSI/PSIP editor VCT override Short channel name, TSID, Source ID, major- and minor channel number Conversion from ATSC to DVB Transport Streams Redundancy and monitoring Input redundancy Input switching on loss of signal and TR101 290 pri1 alarms Input signal monitoring R1513 TR 101 290 priority 100-240V AC +/- 10%, 50/60 Hz, optional: -48V DC Power consumption 35W max Transport stream adaptation IP smallcasting 10/100 Base-T Ethernet Connector: RJ45 Product options CP505-DC - 48V DC power supply CP505-AC2 Dual 230V power supplies CP505-SFP + x SFP modules for interface adaptation CP505-SFP Enable SFP socket CP505-AFX Advanced feature set including TS processing, PSIP caroussel, PSIP rebranding and rate adaptation CP505-ISW Automatic input switching for input redundancy CP505-PSIE PSI/SI/PSIP editor CP505-PMCP Dynamic PSIP EIT generation based on PMCP XML schedules. cProcessor Our award-winning cProcessor transport stream processing and multiplexing products make the complex simple. Even better, they enable tailoring of regional and local service packages, component filtering, advanced updating of PSI/SI/PSIP tables, and enhanced quality of service. User friendly, highly robust and cost effective. It’s this simplicity and performance that has secured our place in some of the world’s most advanced terrestrial networks. CONTACT INFORMATION The Americas firstname.lastname@example.org +1 (805) 247-8560 Asia Pacific email@example.com +65 6872 9361 Europe and Africa firstname.lastname@example.org +47 33 48 99 99 / +47 22 88 97 50 Middle East email@example.com +971 (0)4 3901018 UK firstname.lastname@example.org +44 118 9735831 nevion.com Nevion reserves the right to make changes without notice to equipment specification or design. The information provided in this document is for guidance purposes only and shall not form part of any contract. © 2015 Nevion. All rights reserved.