HPE R100 Wireless VPN Router Series data sheet

Data sheet
HPE R100 Wireless
VPN Router Series
Key features
•High-speed connectivity with 4-port gigabit switch and 11n single radio/11ac dual radio
access point
•Advanced security features like SPI firewall, URL/MAC/IP/Content filters, and DoS attack protection
•VPN initiation and termination (IPsec, L2TP, PPTP) for secure data transfers
•USB port for storage applications
•Intuitive graphical interface with easy setup wizard for simple management
Product overview
The all-in-one HPE R100 Wireless VPN Router Series delivers secure high-performance Internet
access and wired/wireless connectivity for offices and remote/mobile employees. Part of the
HPE OfficeConnect portfolio, the routers feature the next-generation Hewlett Packard Enterprise
Networking user interface and easy setup wizard that are designed for simplicity and reliability
to get your business connected quickly.
The router includes a Stateful Packet Inspection (SPI) firewall, and enterprise grade VPN technology,
combined with wireless encryption features like WPA/WPA2 encryption for secure data transfer.
Advanced security features like IEEE 802.1X, URL filters, content filters, MAC filters, and trusted users
management keep your network safe from outside threats and unauthorized access. Time‑based
rules that enable scheduling rules for radios and security filters; combined with email alerts simplify
management tasks for users.
With a compact executive design featuring internal antennas, the routers are ideal for unobtrusive
use in office environments.
Data sheet
Page 2
Features and benefits
Wireless features
•IEEE 802.11 a/b/g/n/ac compliance
Superior wireless performance with Wi-Fi-certified built-in access points. R110 model has built-in
single radio dual band IEEE 802.11a/b/g/n compliant access point. R120 model has built-in
dual radio 802.11 a/b/g/n/ac compliant access point
•Multiple-input Multiple-output (MIMO)
Both models support 3x3 MIMO antennas to ensure wider wireless coverage and superior throughput
•Multiple SSIDs
Each radio supports up to 4 SSIDs to help segregate wireless clients and apply granular policies
•WMM (IEEE 802.11e)
Provides quality of service (QoS) to wireless clients based on access categories like voice, video,
best effort, and background
•WMM-power save
WMM-power save mode helps reduce power consumption on wireless network
•Wireless Distribution System (WDS)
Allows users to expand wireless coverage without the requirement for a wired connection.
R100 series routers can be linked together via the wireless medium (using SSIDs), while at
the same time servicing clients in the vicinity of each router
•Wi-Fi Protected Setup (WPS v2)
WPS v2 protocol allows customers to easily create secure wireless link between wireless client
devices that support WPS and the router
•SSID to VLAN mapping
Allows user to segregate wireless traffic
Security
•Stateful firewall
Enforces firewall policies to control traffic and filter access to network services; maintains session
information for every connection passing through it, enabling the firewall to control packets
based on existing sessions
•URL filtering
Blocks unsafe websites and protects network based on URL information
•Content filtering
Blocks websites and protects network based on keyword match done on the content
in the webpage
Data sheet
Page 3
•Network access control
MAC address and IP address-based network access control. IP/MAC binding
•IEEE 802.1X authentication and RADIUS login
Authenticate wireless clients based on 802.1X protocol using a Radius server
•Denial of Service (DoS) prevention
Detects and blocks commonly used DoS attacks that can be initiated on the devices. Common attack
signatures are stored in the device
•Application Level Gateway (SIP/H323)
Discovers the IP address and service port information embedded in the application data using
deep packet inspection in the firewall; firewall then dynamically opens appropriate connections
for specific applications
•Secure management
MAC/IP based administrator authentication, secure WAN/LAN access to management interface,
encrypt management traffic using HTTPS
•HTTPS management
Provides secure Web management
•Management password
Provides security so that only authorized access to the Web Management interface is allowed
Virtual private network (VPN)
•IPsec
Provides secure tunneling over an untrusted network such as the Internet or a wireless network;
offers data confidentiality, authenticity, and integrity between two network endpoints
•Layer 2 Tunneling Protocol (L2TP)
An industry-standard-based traffic encapsulation mechanism supported by many common OSs;
will tunnel the point-to-point Protocol (PPP) traffic over the IP and non-IP networks; may use
the IP/UDP transport mechanism in IP networks
•Network Address Translation-Traversal (NAT-T)
Enables IPsec-protected IP datagrams to pass through a network address translator (NAT)
•Point-to-Point Tunneling Protocol (PPTP)
An industry-standard-based traffic encapsulation mechanism for VPN tunnels supported by
many common OSs; PPTP uses a control channel over TCP and a GRE tunnel operating to
encapsulate PPP packets
Data sheet
Page 4
•Site-to-site VPN tunnel
Configures VPN gateways on routers to provide secure site-to-site communication between
offices, partners, or remote workers; tunnels can be set using IPsec, PPTP, or L2TP over
IPsec protocols
•Client mode VPN tunnel
Supports native VPN client based on Windows® and MAC OS
•VPN pass through
Supports VPN pass through of PPTP, L2TP, and IPsec tunnels
Management
•Network Time Protocol (NTP)
Synchronizes timekeeping among distributed time servers and clients; keeps timekeeping consistent
among all clock-dependent devices within the network so that the devices can provide diverse
applications based on the consistent time
•Secure Web GUI
Provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
•Event logging
Supports local logging as well as remote syslog server
•Email alerts
Device can be configured to send email alerts to preconfigured email address
•USB support
Supports file transfer from compatible USB devices. Supports Samba and FTP server
•SNMP v1, v2c
Supports limited SNMP management capability
•Firmware upgrade
Supports firmware upgrade via HTTP/HTTPS. Also supports configuration file import/export
through Web interface
•Traffic statistics
Monitor traffic statistics on device interfaces, SSID, and client level
•Tools
Troubleshooting tools, such as Support file generation, ping, traceroute, nslookup, etc.
•Time-based rules
Simplifies network management by setting time- based rules on device features, such as wireless
radio, security filters, etc.
Data sheet
Page 5
Layer 2 switching
•Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) protocol
snooping controls and manages the flooding of multicast packets in a layer 2 network
•IEEE 802.1D Spanning Tree Protocol (STP)
Provides redundant links while preventing network loops
•IEEE 802.1w Rapid Convergence Spanning Tree Protocol (RSTP)
Increases network uptime through faster recovery from failed links
•Auto MDI/MDIX
Provides automatic adjustments for straight through or crossover cables on all 10/100/1000 ports
•VLAN (IEEE 802.1Q)
Supports one tagged VLAN per LAN port. Helps segregate traffic on LAN ports to virtual groups
Layer 3 services
•Address Resolution Protocol (ARP)
Determines the MAC address of another IP host in the same subnet; supports static ARPs;
gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP
operation between subnets or when subnets are separated by a layer 2 network
•Dynamic Host Configuration Protocol (DHCP)
Simplifies the management of large IP networks and supports client and server; DHCP relay
enables DHCP operation across subnets
•IPv6
Dual stack (IPv4/IPv6): transitions from IPv4 to IPv6, supporting connectivity for both
protocols—MLD snooping: forwards IPv6 multicast traffic to the appropriate interface,
preventing traffic flooding—IPv6 ready: switch hardware can support IPv6 routing
•Network Address Translation (NAT) and Port Address Translation (PAT)
Preserves a network’s IP address pool or conceals the private address of network resources
such as Web servers, which are made accessible to users of a guest or public wireless LAN;
provides choice of dynamic or static translation
•DHCP server
Multi-scope DHCP server hands out IPv4 and/or IPv6 addresses to client devices
•DMZ support
Allows users to open a local client for unrestricted two way access, especially if that client cannot
run an Internet application properly from behind the NAT firewall
•Dynamic DNS (DDNS)
Supports DDNS feature that allows customers to access a dynamic address with a fixed domain name
Data sheet
Page 6
Layer 3 routing
•Static routes
Ability to manually configure IPv4 and IPv6 routes
•RIPv1, v2, ng
Dynamically routes IPv4 and IPv6 packets between different subnets using RIP protocol
QoS
•Traffic prioritization (DSCP)
Prioritizes traffic based on layer 3 header in IP packets. Helps prioritize time-sensitive traffic
like voice and video
•Traffic prioritization (IEEE 802.1p)
Traffic prioritization based on layer 2 packet headers. Allows real-time traffic like voice and video
to be prioritized
•IEEE 802.11e
IEEE 802.11e Wi-Fi Multimedia (WMM) wireless QoS standard—when combined with wired
QoS policies—provides end-to-end QoS, delivering different wireless channel competitiveness
for different services
•Queue
Device capable of segregating traffic into 4 priority queues to enable more granular traffic
prioritization. This ensures consistent performance for high priority traffic, even during periods
of network congestion
•Traffic shaping
Enable configuration of bandwidth limit to traffic per queue
•Traffic remarking
Allows remarking of IEEE 802.1p and DSCP traffic priority
•Queue mapping
Allows mapping of traffic to queue based on MAC address, IP address, traffic type, and certain
commonly used services
Data sheet
Page 7
Ease of use
•Aesthetics
Embedded antennas expand installation options and increase aesthetics
•Easy to use
GUI-driven central management and configuration
•Fanless design
Enables quiet operation for deployment in open spaces
•Flexible mounting
Supports desktop as well as wall mount operation
Warranty and support
•3-year Warranty
See hpe.com/networking/warrantysummary for warranty and support information included with
your product purchase.
•Software releases
To find software for your product, refer to hpe.com/networking/support; for details on the software
releases available with your product purchase, refer to hpe.com/networking/warrantysummary
Data sheet
Page 8
HPE R100 Wireless VPN Router Series
SPECIFICATIONS
HPE R110 Wireless 11n VPN WW Router (J9975A)
HPE R110 Wireless 11n VPN AM Router (J9974A)
I/O ports and slots
1 RJ-45 autosensing 10/100/1000 WAN port
4 RJ-45 autosensing 10/100/1000 LAN ports
1 RJ-45 autosensing 10/100/1000 WAN port
4 RJ-45 autosensing 10/100/1000 LAN ports
AP characteristics
Radios (built-in)
Radio operation modes
AP operation modes
Wi-Fi Alliance Certification
802.11a/b/g/n
Client access, Client bridge
Autonomous
a/b/g/n Wi-Fi Certified
802.11a/b/g/n
Client access, Client bridge
Autonomous
a/b/g/n Wi-Fi Certified
Physical characteristics
Dimensions
Weight
8.5(w) x 5.5(d) x 1.5(h) in (21.59 x 13.97 x 3.81 cm)
1 lb (0.45 kg)
8.5(w) x 5.5(d) x 1.5(h) in (21.59 x 13.97 x 3.81 cm)
1 lb (0.45 kg)
Memory and processor
MIPS @ 700 MHz, 128 MB NAND flash
MIPS @ 700 MHz, 128 MB NAND flash
Mounting and enclosure
Desktop/wall-mount
Desktop/wall-mount
Performance
MAC address table size
VPN throughput
Dedicated IPsec VPN tunnels
Network throughput
Concurrent sessions
Number of VLANs
2048 entries
up to 30Mbps
5
920Mbps (NAT)
5
4
2048 entries
up to 30Mbps
5
920Mbps (NAT)
5
4
Environment
Operating temperature
Operating relative humidity
Nonoperating/Storage temperature
Altitude
Notes
32°F to 104°F (0°C to 40°C)
5% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
up to 10,000 ft (3 km)
No Fan
32°F to 104°F (0°C to 40°C)
5% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
up to 10,000 ft (3 km)
No Fan
100 - 240 VAC
9.5 W
Maximum power rating and maximum heat dissipation
are the worst-case theoretical maximum numbers provided
for planning the infrastructure with fully loaded PoE
(if equipped), 100% traffic, all ports plugged in, and
all modules populated.
12V DC power adaptor
100 - 240 VAC
9.5 W
Maximum power rating and maximum heat dissipation
are the worst-case theoretical maximum numbers provided
for planning the infrastructure with fully loaded PoE
(if equipped), 100% traffic, all ports plugged in, and
all modules populated.
12V DC power adaptor
51.54
51.54
Electrical characteristics
AC voltage
Maximum power rating
Notes
Reliability
MTBF (years)
Data sheet
Page 9
SPECIFICATIONS
HPE R110 Wireless 11n VPN WW Router (J9975A)
HPE R110 Wireless 11n VPN AM Router (J9974A)
Safety
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60950-1
UL 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1
Emissions
EN 55022 Class B; EN 301 489-1; EN 301 489-17
ICES-003 Class B; FCC Part 15 Class B
Radio
EN 300 328; EN 301 893
FCC Part 15.247; FCC Part 15.407; RSS-210
RF exposure
EN 62311
FCC Bulletin OET-65C; RSS-102
Frequency Bands and Operating Channels
FCC
•2.412 - 2.462 GHz (1 - 11 channels
•5.180 - 5.240 GHz (36 - 48 channels)
•5.745 - 5.825 GHz (149 - 165 channels)
European Union
•2.412 - 2.472 GHz (1 - 13 channels)
•5.180 - 5.240 GHz (36 - 48 channels)
•5.260 - 5.320 GHz (52 - 64 channels)
•5.500 - 5.700 GHz (100 - 140 channels),
excluding 5600-5650 MHz
Rest of World (Actual channels designated
by selecting country in UI)
•2.412 - 2.472 GHz (1 - 13 channels)
•5.180 - 5.320 GHz (36 - 64 channels)
•5.500 - 5.700 GHz (100 - 144 channels);
excluding 5600-5650 MHz
•5.745 - 5.825 GHz (149 - 165 channels)
Taiwan
•2.412 - 2.462 GHz (1 - 11 channels)
•5.280 - 5.320 GHz (56 - 64 channels)
•5.500 - 5.700 GHz (100 - 144 channels);
excluding 5600-5650 MHz
•5.745 - 5.825 GHz (149 - 165 channels)
Transmit Power
•2.4Ghz
802.11b 11dbm +/-2dBm
802.11g 13dBm +/-2dBm
802.11n HT20 13dBm +/-2dBm
802.11n HT40 13dBm +/-2dBm
•5Ghz
802.11a 22dBm +/-2dBm
802.11n HT20 21dBm +/-2dBm
802.11n HT40 20dBm +/-2dBm
•Maximum transmit power varies by country
•2.4Ghz
802.11b 19dbm +/-2dBm
802.11g 22dBm +/-2dBm
802.11n HT20 23dBm +/-2dBm
802.11n HT40 19dBm +/-2dBm
•5Ghz
802.11a 22dBm +/-2dBm
802.11n HT20 21dBm +/-2dBm
802.11n HT40 21dBm +/-2dBm
•Maximum transmit power varies by country
Receiver Sensitivity
802.11b:-78dBm@11Mbps
802.11g:-73dBm@54Mbps
802.11n(2.4Ghz):-66dBm@450Mbps
802.11a:-72dBm@54Mbps,
802.11n(5Ghz):-65dBm@450Mbps
802.11b:-78dBm@11Mbps
802.11g:-73dBm@54Mbps
802.11n(2.4Ghz):-66dBm@450Mbps
802.11a:-72dBm@54Mbps,
802.11n(5Ghz):-65dBm@450Mbps
Notes
Regulatory Model Number: MRLBB-1401
Regulatory Model Number: MRLBB-1401
Management
IMC—Intelligent Management Center; Web browser
IMC—Intelligent Management Center; Web browser
Services
Refer to the Hewlett Packard Enterprise website at
hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about
services, and response times in your area, please contact
your local Hewlett Packard Enterprise sales office.
Refer to the Hewlett Packard Enterprise website at
hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about
services, and response times in your area, please contact
your local Hewlett Packard Enterprise sales office.
Data sheet
Page 10
HPE R100 Wireless VPN Router Series
SPECIFICATIONS (CONTINUED)
HPE R120 Wireless 11ac VPN WW Router (J9977A)
HPE R120 Wireless 11ac VPN AM Router (J9976A)
I/O ports and slots
1 RJ-45 autosensing 10/100/1000 WAN port
4 RJ-45 autosensing 10/100/1000 LAN ports
1 RJ-45 autosensing 10/100/1000 WAN port
4 RJ-45 autosensing 10/100/1000 LAN ports
AP characteristics
Radios (built-in)
Radio operation modes
AP operation modes
Wi-Fi Alliance Certification
802.11a/b/g/n/ac
Client access, Client bridge
Autonomous
a/b/g/n/ac Wi-Fi Certified
802.11a/b/g/n/ac
Client access, Client bridge
Autonomous
a/b/g/n/ac Wi-Fi Certified
Physical characteristics
Dimensions
Weight
8.5(w) x 5.5(d) x 1.5(h) in (21.59 x 13.97 x 3.81 cm)
1.28 lb (0.58 kg)
8.5(w) x 5.5(d) x 1.5(h) in (21.59 x 13.97 x 3.81 cm)
1.28 lb (0.58 kg)
Memory and processor
MIPS @ 1 GHz, 128 MB NAND flash
MIPS @ 1 GHz, 128 MB NAND flash
Mounting and enclosure
Desktop/wall-mount
Desktop/wall-mount
Performance
MAC address table size
VPN throughput
Dedicated IPsec VPN tunnels
Network throughput
Concurrent sessions
Number of VLANs
2048 entries
up to 200Mbps
5
920Mbps (NAT)
5
4
2048 entries
up to 200Mbps
5
920Mbps (NAT)
5
4
Environment
Operating temperature
Operating relative humidity
Nonoperating/Storage temperature
Altitude
Notes
32°F to 104°F (0°C to 40°C)
5% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
up to 10,000 ft (3 km)
No Fan
32°F to 104°F (0°C to 40°C)
5% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
up to 10,000 ft (3 km)
No Fan
100 - 240 VAC
15 W
Maximum power rating and maximum heat dissipation
are the worst-case theoretical maximum numbers provided
for planning the infrastructure with fully loaded PoE
(if equipped), 100% traffic, all ports plugged in, and
all modules populated.
12V DC power adaptor
100 - 240 VAC
15 W
Maximum power rating and maximum heat dissipation
are the worst-case theoretical maximum numbers provided
for planning the infrastructure with fully loaded PoE
(if equipped), 100% traffic, all ports plugged in, and
all modules populated.
12V DC power adaptor
Reliability
MTBF (years)
41.84
41.84
Safety
UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60950-1
UL 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1
Emissions
EN 55022 Class B; EN 301 489-1; EN 301 489-17
ICES-003 Class B; FCC Part 15; Class B
Radio
EN 300 328; EN 301 893
FCC Part 15.247; FCC Part 15.407; RSS-210
RF exposure
EN 62311
FCC Bulletin OET-65C; RSS-102
Electrical characteristics
AC voltage
Maximum power rating
Notes
Data sheet
SPECIFICATIONS (CONTINUED)
Page 11
HPE R120 Wireless 11ac VPN WW Router (J9977A)
Frequency Bands and Operating Channels
FCC
HPE R120 Wireless 11ac VPN AM Router (J9976A)
•2.412 - 2.462 GHz (1 - 11 channels
•5.180 - 5.240 GHz (36 - 48 channels)
•5.745 - 5.825 GHz (149 - 165 channels)
European Union
•2.412 - 2.472 GHz (1 - 13 channels)
•5.180 - 5.240 GHz (36 - 48 channels)
•5.260 - 5.320 GHz (52 - 64 channels)
•5.500 - 5.700 GHz (100 - 140 channels),
excluding 5600-5650 MHz
Rest of World (Actual channels designated
by selecting country in UI)
•2.412 - 2.472 GHz (1 - 13 channels)
•5.180 - 5.320 GHz (36 - 64 channels)
•5.500 - 5.700 GHz (100 - 144 channels);
excluding 5600-5650 MHz
•5.745 - 5.825 GHz (149 - 165 channels)
Taiwan
•2.412 - 2.462 GHz (1 - 11 channels)
•5.280 - 5.320 GHz (56 - 64 channels)
•5.500 - 5.700 GHz (100 - 144 channels);
excluding 5600-5650 MHz
•5.745 - 5.825 GHz (149 - 165 channels)
Transmit Power
•2.4Ghz
802.11b 13dbm +/-2dBm
802.11g 13dBm +/-2dBm
802.11n HT20 13dBm+/-2dBm
802.11n HT40 13dBm +/-2dBm
•5Ghz
802.11a 21dBm +/-2dBm
802.11n/802.11ac HT20/VHT20 21dBm +/-2dBm,
802.11n/802.11ac HT40/VHT40 21dBm +/-2dBm
802.11ac VHT80 21dBm +/-2dBm
•Maximum Transmit power varies by country
•2.4Ghz
802.11b 23dbm +/-2dBm
802.11g 22dBm +/-2dBm
802.11n HT20 22dBm+/-2dBm
802.11n HT40 17dBm +/-2dBm
•5Ghz
802.11a 21dBm +/-2dBm
802.11n/802.11ac HT20/VHT20 21dBm +/-2dBm,
802.11n/802.11ac HT40/VHT40 21dBm +/-2dBm
802.11ac VHT80 15dBm +/-2dBm
•Maximum Transmit power varies by country
Receiver Sensitivity
802.11b:-88dBm@11Mbps
802.11g:-72dBm@54Mbps
802.11n (2.4Ghz):-69dBm@450Mbps
802.11a:-76dBm@54Mbps,
802.11n(5Ghz):-71dBm@450Mbps
802.11ac:-61dBm@1300Mbps
802.11b:-88dBm@11Mbps
802.11g:-72dBm@54Mbps
802.11n (2.4Ghz):-69dBm@450Mbps
802.11a:-76dBm@54Mbps,
802.11n(5Ghz):-71dBm@450Mbps
802.11ac:-61dBm@1300Mbps
Notes
Regulatory Model: MRLBB-1404
Radio Module Model number:
•MRLBB-1402
•MRLBB-1403
Regulatory Model: MRLBB-1404
Radio Module Model number:
•MRLBB-1402
•MRLBB-1403
Management
IMC—Intelligent Management Center; Web browser
IMC—Intelligent Management Center; Web browser
Services
Refer to the Hewlett Packard Enterprise website at
hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about
services, and response times in your area, please contact
your local Hewlett Packard Enterprise sales office.
Refer to the Hewlett Packard Enterprise website at
hpe.com/networking/services for details on the service-level
descriptions and product numbers. For details about services,
and response times in your area, please contact your local
Hewlett Packard Enterprise sales office.
Data sheet
STANDARDS AND PROTOCOLS
(applies to all products in series)
Denial of service protection
Automatic Filtering of well-known Denial
of Service Packets
Device management
RFC 1157 SNMPv1/v2c
Web UI
General protocols
IEEE 802.11a/b/g Wireless Protocol
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1p Priority
IEEE 802.1Q VLANs
IEEE 802.1W Rapid Spanning Tree Protocol
IEEE 802.3 Type 10BASE-T
IEEE 802.3ab 1000BASE-T
RFC 1631 NAT
RFC 1723 RIP v2
IPv6
RFC 2131 DHCP
RFC 2236 IGMP Snooping
RFC 2637 Point-to-Point Tunneling
Protocol (PPTP)
RFC 2661 L2TP
RFC 2080 RIPng for IPv6
Mobility
IEEE 802.11a High Speed Physical Layer
in the 5 GHz Band
IEEE 802.11ac WLAN Enhancements
for Very High Throughput
IEEE 802.11b Higher-Speed Physical Layer
Extension in the 2.4 GHz Band
IEEE 802.11e QoS enhancements
IEEE 802.11g Further Higher Data Rate
Extension in the 2.4 GHz Band
IEEE 802.11n WLAN Enhancements
for Higher Throughput
QoS/CoS
IEEE 802.1P (CoS)
RFC 2474 DSCP DiffServ
RFC 2474, with 4 queues per port
Wi-Fi MultiMedia (WMM), IEEE 802.11e
Security
WPA (Wi-Fi Protected Access)
WPA (Wi-Fi Protected Access)/WPA2
Learn more at
hpe.com/networking
HPE access points and access devices are
Wi-Fi Certified, providing our customers
with the assurance that these products
have met and passed the rigorous
interoperability testing performed by
the Wi-Fi Alliance Organization. See the
Specifications section of this series for
more information.
Sign up for updates
Rate this document
© Copyright 2014-2015 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice.
The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying
such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall
not be liable for technical or editorial errors or omissions contained herein.
Windows is a trademark of the Microsoft group of companies.
4AA5-4569ENW, November 2015, Rev. 2
Download PDF
Similar pages