BS 203 A: Little but big in performance
Compared to the BS 203.2, the BS 203 A
now features a new network which makes
this loudspeaker ideal for stand mounting.
Known as the black beauty, the BS 203 A is
finished in a black piano lacquer. This
beauty is not just skin deep, utilising highquality drivers made in Germany, the BS
203 A is able to present outstanding
performance. For optimum performance it is
recommended that the BS 203 A is used
with the LS 70 stand.
Technical features and benefits
•
Strong drive and a new neodymium magnet system endow the JET
III tweeter with incredible dynamic reserves and a high maximum
output level. A new inner structure, and larger sound apertures, yield
a precise upper cut-off frequency of 50 kHz. The JET III tweeter is
therefore ideal for the reproduction of DVD-A, SACD and Vinyl.
The 150 mm aluminium sandwich woofer offers diaphragm stiffness,
strong drive, large-signal behaviour and smooth bass sound.
•
•
Resonances of the cabinet are avoided due to ring-shaped
reinforcements.
•
The double flare port has been
designed to reduce friction losses.
The bass reproduction can be
improved by using bass control plugs
(delivered with this product). For
installation close to walls, the rear
bass port can be closed with a twopiece bass control plug.
The high-quality terminals with separate circuit boards for
bass/midrange and treble circuits are easy to access and allow
larger cable diameters (16 mm2), as well as high-quality spade
connectors (e. g. WBT products) with diameters of max. 8 mm.
1
•
The loudspeaker stand LS 70 (height: 726 mm) is available as an
accessory.
Finishes: cherry veneer, black high gloss, white high gloss, black , silver shadow, titan shadow
Specifications
Dimensions H x W x D
Weight
Type
Woofer
ELAC BS 203 A
285 x 170 x 232 mm
5,2 kg
2-way, bass reflex
1 x 150 mm AS cone
Crossover Frequency
Nominal / Peak Power Handling
Frequency Range
Sensitivity
Nominal Impedance
2600 Hz
60 W / 80 W
42-50.000 Hz
86 dB/2,8V/m
4 Ohm
Tweeter
Recom. Amplifier Power
at Nominal Impedance
1 x JET III
50 – 150 W / channel
Minimum Impedance
3,5 Ohm/210 Hz
2